How to Put Ink Cartridges in a Printer Whether you just got a new printer or it’s time to replace an empty ink cartridge in your existing printer, putting an ink cartridge in your printer only takes a few minutes. Once your printer is on, take your new ink cartridge out of the packaging, open your ink tray and replace any old cartridges with your new ones. Most printers operate similarly, creating putting a new cartridge in simple. For Example Putting Ink Cartridges in a Canon Printer: 1. Open the ink tray in the center of your printer. If you have a Canon printer that uses a FINE cartridge like in the MX or MG series, you will have a center paper output cover which is above your output tray. Open your ink tray in the center which is above the output tray. • make sure that your printer is plugged in and turned on. In order for the ink compartments to slide into view, your printer must be powered on. • The ink cartridges will slide to the right side of your open tray. This is the replacement position. • In some Canon printers, such as the MX or MG Series which uses FINE ink cartridges, the cartridge holder moves to a replacement position behind the head cover. The head cover can open automatically. • If you have a Canon PIXMA printer which uses several, smaller ink cartridges, the cartridge holder can slide into the middle of your operations tray when you open the operation lid on top of the printer. 2. Remove any existing ink cartridges from the printer. If there are already ink cartridges in your printer, you will have to remove these old ones. • press down on the ink cartridge you wish to remove. The cartridge lock lever can click, dislodging the cartridge. • Once you hear the click and see the existing ink cartridge popped out, pull it the rest of the way out. 3. Remove the new ink cartridge from the packaging. Take the new cartridge from its packaging and remove the protective tape. • Some Canon printers only use 2 cartridges, one black, and one tri-color, such as in the MX series. Others like the PIXMA use several cartridges, one for each color. All cartridges can have a protective film over the ink nozzle you need to remove. • remove the protective tab on the ink cartridge. This is a plastic film that covers the part of your cartridge that dispels the ink. • be careful to not touch the copper-colored area of the cartridge or the ink nozzles. Touching this area can cause clogs, ink failure, or disconnection if your fingerprints smudge the area. Do not shake your cartridges either. 4. Insert your new ink cartridges. Gently slide the new cartridge into the ink slot. • Insert your cartridge into the slot with the ink nozzles facing away from you. • The color cartridge goes on the left side. The black cartridge on the right side. Make sure you hear a click to ensure the cartridge is locked into place. 5. Shut the ink cartridge door. You should feel it click into place. • Once the door is closed properly you may hear the cartridges slide back into place. • Finished. I think it helps you. If not and you have another issue regarding Printers then don't worry and contact Printer Support Phone Number they will surely help you to come out from the any Printers problems.