How-to: NetApp ONTAP 9.1 simulator deployment
1 of 11
https://vmstorageguy.wordpress.com/2017/04/01/how-to-netapp-ontap-9-1-simulator-deployment/
ALLGEMEIN / NETAPP
How-to: NetApp ONTAP 9.1 simulator deployment
1. APRIL 20171. APRIL 2017
RENNERSTEFAN
LEAVE A COMMENT
This post will show you how to deploy the new NetApp ONTAP 9.1 simulator on a VMware vSphere 6.5 host.
After releasing a post on how to run the setup with Data ONTAP 8.3 (please find here (h ps://vmstorageguy.wordpress.com/2015/08
/18/netapp-ontap-simulator-8-3-how-to/)) I thought its worth to write another one as NetApp really changed the simulator in terms of
capacity as well as the setup process.
Ge ing the required Software
1. Login to support.netapp.com with your credentials
2. Go to “Download – Software” and click on “Data ONTAP Simulator”
(h ps://vmstorageguy.files.wordpress.com/2015/08/1.png)
3. Accept the license agreements and terms and conditions.
12/2/2017, 8:54 PM
How-to: NetApp ONTAP 9.1 simulator deployment
2 of 11
https://vmstorageguy.wordpress.com/2017/04/01/how-to-netapp-ontap-9-1-simulator-deployment/
4. Download your required OVF template for VMware Workstation or VMware ESX
as well as the license file.
12/2/2017, 8:54 PM
How-to: NetApp ONTAP 9.1 simulator deployment
3 of 11
https://vmstorageguy.wordpress.com/2017/04/01/how-to-netapp-ontap-9-1-simulator-deployment/
Importing the virtual appliance to VMware ESXi
1. Open your VMware vSphere Client. As of today the Webclient does not support so you have to use the desktop client for the import.
2. Click “File – Deploy OVF Template”
12/2/2017, 8:54 PM
How-to: NetApp ONTAP 9.1 simulator deployment
4 of 11
https://vmstorageguy.wordpress.com/2017/04/01/how-to-netapp-ontap-9-1-simulator-deployment/
3. Select your downloaded OVF and follow the wizard to get the VM imported.
Initializing the ONTAP Simulator
1. Power on the simulator VM
2. Open the console to see and control the VM
3. During the boot press CTRL + C to enter the advanced menu
4. Select option 4 to initialize all disks
5. After the initialization is done the controller will reboot and start the setup wizard
6. First step is to start the setup and set a Management IP for the ONTAP 9.1 VM. Please set all required IP details. After all is entered you
will see that from now on the setup can be completed by using the web browser. Please open your browser and navigate to the
12/2/2017, 8:54 PM
How-to: NetApp ONTAP 9.1 simulator deployment
5 of 11
https://vmstorageguy.wordpress.com/2017/04/01/how-to-netapp-ontap-9-1-simulator-deployment/
mentioned address.
There is still the option to do everything on the CLI but we will continue to use the browser in this post.
ONTAP 9.1 Cluster setup
1. First step is to start the cluster setup by clicking on “Guided Setup”.
12/2/2017, 8:54 PM
How-to: NetApp ONTAP 9.1 simulator deployment
6 of 11
https://vmstorageguy.wordpress.com/2017/04/01/how-to-netapp-ontap-9-1-simulator-deployment/
2. On the next page please define the cluster name, enable the checkbox that it is a single-node cluster if it applies, set a admin password
and add you base as well as feature licenses (comma separated).
12/2/2017, 8:54 PM
How-to: NetApp ONTAP 9.1 simulator deployment
7 of 11
https://vmstorageguy.wordpress.com/2017/04/01/how-to-netapp-ontap-9-1-simulator-deployment/
3. Finally click on next to move to the network se ings.
4. In the network section you need to define a network layout. It is recommended to set a range of IPs (in my case 172.16.3.2 – 172.16.3.10)
and use the “Apply Sequentially”. With that ONTAP will apply IPs based on the need.
12/2/2017, 8:54 PM
How-to: NetApp ONTAP 9.1 simulator deployment
8 of 11
https://vmstorageguy.wordpress.com/2017/04/01/how-to-netapp-ontap-9-1-simulator-deployment/
Also set the DNS details as well as the NTP se ings.
5. Finally you can define AutoSupport as well as system backup and additional notification se ings. You need to define at least on “Event
Notification”.
12/2/2017, 8:54 PM
How-to: NetApp ONTAP 9.1 simulator deployment
9 of 11
https://vmstorageguy.wordpress.com/2017/04/01/how-to-netapp-ontap-9-1-simulator-deployment/
6. With a final click on submit the wizard is completed and your simulator is ready to be managed by the ONCOMMAND System
Manager
12/2/2017, 8:54 PM
How-to: NetApp ONTAP 9.1 simulator deployment
https://vmstorageguy.wordpress.com/2017/04/01/how-to-netapp-ontap-9-1-simulator-deployment/
7. Just click on “Manage your cluster” and you will be automatically redirected to the system manager.
8. From here you can go ahead and use the ONTAP 9.1 simulator, create your aggregates and volumes and have fun.
As always, I hope this post was useful for some of you. Let me know on any question or feedback what you want to see as a next post.
10 of 11
12/2/2017, 8:54 PM
How-to: NetApp ONTAP 9.1 simulator deployment
https://vmstorageguy.wordpress.com/2017/04/01/how-to-netapp-ontap-9-1-simulator-deployment/
9.1, 9.1 SIMULATOR, DATA ONTAP, DEPLOYMENT, HOMELAB, HOW TO, LAB, NETAPP, ONTAP, ONTAP 9, ONTAP 9.1, SETUP,
SIMULATOR, VEEAM
11 of 11
CREATE A FREE WEBSITE OR BLOG AT WORDPRESS.COM.
12/2/2017, 8:54 PM