Brochure
Flexing Test Apparatus
(WQ-2)
Global Office of Lisun Electronics Inc.
http://www.Lisungroup.com
Lisun Group (Hong Kong) Limited
Add: Room C, 15/F Hua Chiao Commercial Center, 678 Nathan Road, Mongkok,
Kowloon, Hong Kong
Tel: 00852-68852050
Fax: 00852-30785638
Email: SalesHK@Lisungroup.com
Lisun Electronics (Shanghai) Co., Ltd
Add: 113-114, No. 1 Building, Nanxiang Zhidi Industry Park, No. 1101, Huyi Road, Jiading
District, Shanghai, 201802, China
Tel: +86(21)5108 3341
Fax: +86(21)5108 3342
Email: SalesSH@Lisungroup.com
Chapter 1 Summarize
Lisun Electronics(大标题，居中小三加粗，尽量在新一页，用
Inc. (USA)
Chapter 区分)
Add: 445 S. Figueroa Street, Los Angeless, CA 90071, U.S.A.
1. Operating instruction （一级标题，左对齐小四加粗）
Email: Sales@Lisungroup.com
According to the requirements of CIE, IESNA and the National’s standard, this
system is a multi-measurement mode spectrophotometer system which can realize
Lisun China Factory
B-β, A-α and C-γ etc through rotating lamps and lanterns.
Add: NO. 37, Xiangyuan Road, Hangzhou City, Zhejiang Province, China
Tel: +86-189-1799-6096
It test Spatial, light intensity distribution curves on any cross section (can be shown
Email: Engineering@Lisungroup.com
under the rectangular coordinate system or polar coordinate system), spatial
System configuration:
Lead in CFL & LED Test Instruments
UV-263LS UV
aging test Chamber
Rev. 1/17/2019
Lisun Electronics Inc.
Sales@Lisungroup.com
www.Lisungroup.com
1. Test Objective
This machine is a special equipment for testing the bending fatigue strength of AC
and DC power cord. It can be automatic counting. When sample bending fold to
break causes no power, it can automatically stop operation. (standard type with
speed display)
2. Referring to standards
GB2099.1-2008< Household and Similar Use Plug Socket Part 1: General
Requirements> 23.4 soft cable and connecting requirements, as shown in figure 21
GB4706.1-2005<Household and Similar Use Household Appliance Part 1: General
Requirements>25.14 requirements, as shown in figure 8
GB/T5023.2-2008<Rated Voltage Equal to or Less Than 450/750 PVC Insulated
Cables Part 2: Test methods> Testing: Flexing Test, as shown in figure 2.Through
the conductor of electric current is about 0.1 A according to test requirement
Factory Inspection Site Representative Witness Test Guidelines Swing Testing （Cord
Sets and Power Supply Cord）
General requirements IEC60335-1
3. Technical Parameters

Fixture: 6 groups

Power supply: AC220V ±10% 5A

Motor power: 90W/220V AC

Angle Bending: Left or right 30、45、60、90 adjustable(0°-180°adjustable
continuously)(Weights can be changed according to customer’s needs)
-Page 1 -
Lisun Electronics Inc.
Sales@Lisungroup.com
www.Lisungroup.com

Bending Speed: Can be directly display, Header display

Counter: Six good parts counter, a preset counter

Weight: 50g，100g，113g，200g，284g，300g，500g(select)

Volume: 845×400×945MM

Failure judgment: When there is a broken line to be measured, the
corresponding LED lights are not bright, the corresponding good counter to stop
counting.

The show value is the times of bending about the tested power line. The
machine stops running when all lines to be measured are broken.

Qualified judgment: When the test line is set to achieve the number of tests, the
detection device automatically stops, and shows good count.
-Page 2 -