Uploaded by Jacky Jiang

LISUN Cord Anchorage Force Torque Tester

advertisement
Brochure
Cord Anchorage force & torque
tester
(LN-2)
Global Office of Lisun Electronics Inc.
http://www.Lisungroup.com
Lisun Group (Hong Kong) Limited
Add: Room C, 15/F Hua Chiao Commercial Center, 678 Nathan Road, Mongkok,
Kowloon, Hong Kong
Tel: 00852-68852050
Fax: 00852-30785638
Email: [email protected]
Lisun Electronics (Shanghai) Co., Ltd
Add: 113-114, No. 1 Building, Nanxiang Zhidi Industry Park, No. 1101, Huyi Road,
Jiading District, Shanghai, 201802, China
Tel: +86(21)5108 3341
Fax: +86(21)5108 3342
Email: [email protected]
Chapter 1 Summarize
Chapter 区分)
Lisun Electronics(大标题,居中小三加粗,尽量在新一页,用
Inc. (USA)
Add:Operating
445 S. Figueroa
Street, Los Angeless,
CA 90071, U.S.A.
1.
instruction
(一级标题,左对齐小四加粗)
Email: [email protected]
According
to the requirements of CIE, IESNA and the National’s standard, this
system is a multi-measurement mode spectrophotometer system which can realize
LisunA-α
China
Factory
B-β,
and
C-γ etc through rotating lamps and lanterns.
Add: NO. 37, Xiangyuan Road, Hangzhou City, Zhejiang Province, China
Tel:
+86-189-1799-6096
It
test
Spatial, light intensity distribution curves on any cross section (can be shown
Email:
[email protected]
under the rectangular coordinate system or polar coordinate system), spatial
iso-intensity curve. (正文,段首顶格左对齐 10 号,段落之间空行)
Lead in CFL & LED Test Instruments
1/17/2019
Lisun Electronics Inc.
[email protected]
www.Lisungroup.com
Cord Anchorage force & torque tester
1. Introduction
This testing machine is according to IEC60335-1, GB2099.1, GB4706, GB7000 and
other standards for testing household and similar electrical appliances torque test,
and it designs for testing whether the power cord clamping device is firm or not. The
machine adopts the force generated by the torque motor to do tension test for the
power line of the sample. Considering the different position of
the electrical
products’ power line, the torque motor is mounted on a column of a movable sleeve
meanwhile the column is mounted on a base with four wheels. It is very convenient
because the working head can be adjusted for each direction.
2. Technical Parameters

Working Power Supply: 220V~50Hz

Tension value: 30N、60N、120N

Tension value: 0.1、0.25、0.35N.m

Tension Testing Time: 0~9999(presetting)

Each Tension time: 1S

Torsion Time:1min

Accuracy: at least0.1N

Specimen Volume:1volume

Size:900×900×550(mm)
-Page 1 -
Download
Random flashcards
Arab people

15 Cards

Pastoralists

20 Cards

Marketing

46 Cards

Create flashcards