Brochure
LED Driver Online Tester
(LEDLS-60/LEDLS-12)
Global Office of Lisun Electronics Inc.
http://www.Lisungroup.com
Lisun Group (Hong Kong) Limited
Add: Room C, 15/F Hua Chiao Commercial Center, 678 Nathan Road, Mongkok, KL, HK
Tel: 00852-68852050
Fax: 00852-30785638
Email: SalesHK@Lisungroup.com
Lisun Electronics (Shanghai) Co., Ltd
Add: 113-114, No. 1 Building, Nanxiang Zhidi Industry Park, No. 1101, Huyi Road, Jiading
District, Shanghai, 201802, China
Tel: +86(21)5108 3341
Fax: +86(21)5108 3342
Chapter
1 Summarize
Email: SalesSH@Lisungroup.com
(大标题，居中小三加粗，尽量在新一页，用 Chapter 区分)
Lisun Electronics Inc. (USA)
1.
instruction
（一级标题，左对齐小四加粗）
Add:Operating
445 S. Figueroa
Street, Los Angeless,
CA 90071, U.S.A.
According
to
the
requirements
of
CIE,
IESNA and the National’s standard, this
Email: Sales@Lisungroup.com
system is a multi-measurement mode spectrophotometer system which can realize
B-β,
and
C-γ etc through rotating lamps and lanterns.
LisunA-α
China
Factory
Add: NO. 37, Xiangyuan Road, Hangzhou City, Zhejiang Province, China
It
test
Spatial, light intensity distribution curves on any cross section (can be shown
Tel:
+86-189-1799-6096
under
the rectangular coordinate system or polar coordinate system), spatial
Email: Engineering@Lisungroup.com
iso-intensity curve. (正文，段首顶格左对齐 10 号，段落之间空行)
1.1
Explosive material （二级标题，左对齐五号加粗）
Lead in CFL
LED
Test
According to the requirements
of &
CIE,
IESNA
andInstruments
the National’s standard, this
Rev. 1/8/2019
Lisun Electronics Inc.
Sales@Lisungroup.com
www.Lisungroup.com
LED Driver Online Tester LEDLS-60/LEDLS-12
LEDLS-60
LEDLS-12
LEDLS-60/LEDLS-12 LED Driver Online Tester is applied to the production line for
the finished products testing. With features of simplified operation and nice-looking,
the workers can operate it at very short time. This system can meet the
requirements of IEC62384, GB24825-2009 and other relative standards.
Specification:
• The LEDLS-12 has one channel which can test 6 LED Driver input and output
parameters at one time (or 12 LED Driver input or output parameters at one time).
• The LEDLS-60 has ten channels which can test 60 LED Driver input and output
parameters at one time.
• The tester can measure the following parameters:
1). Input Parameter Test (AC) in RMS value: U, I, P, PF, Hz, THD
-Page 1 -
Lisun Electronics Inc.
Sales@Lisungroup.com
www.Lisungroup.com
2). Output Parameter Test (AC/DC) in RMS or Average value: U, I, P, PF, Efficiency,
Ripple Wave Current
3). The Harmonic Test: THD and harmonic components test of 2, 3, 5, 7, 9 and 11
(total 50 is option)
• The LEDLS-60 has 8inch LCD screen to display all of the test parameters, the
LEDLS-12 has 12 windows to display all the test parameters
• The test speed is quick: The LEDLS-60 needs only 20s include the LED load light on
and test. The LEDLS-12 needs only 2s include the LED load light on the test
• They only need to connect six LED DC electric load (LISUN M9822) or LED lamp to
do test
• It allows set upper or lower limit, it will have Noisy/Light warning if the test results
were over limit.
• The manual trigger and software connect to PC to storage test results are option
(extra cost)
-Page 2 -