Brochure Test corners (CSJ-A) Global Office of Lisun Electronics Inc. http://www.Lisungroup.com Lisun Group (Hong Kong) Limited Add: Room C, 15/F Hua Chiao Commercial Center, 678 Nathan Road, Mongkok, Kowloon, Hong Kong Tel: 00852-68852050 Fax: 00852-30785638 Email: SalesHK@Lisungroup.com Lisun Electronics (Shanghai) Co., Ltd Add: 113-114, No. 1 Building, Nanxiang Zhidi Industry Park, No. 1101, Huyi Road, Jiading District, Shanghai, 201802, China Tel: +86(21)5108 3341 Fax: +86(21)5108 3342 Email: SalesSH@Lisungroup.com Chapter 1 Summarize Chapter 区分) Lisun Electronics(大标题,居中小三加粗,尽量在新一页,用 Inc. (USA) Add:Operating 445 S. Figueroa Street, Los Angeless, CA 90071, U.S.A. 1. instruction (一级标题,左对齐小四加粗) Email: Sales@Lisungroup.com According to the requirements of CIE, IESNA and the National’s standard, this system is a multi-measurement mode spectrophotometer system which can realize LisunA-α China Factory B-β, and C-γ etc through rotating lamps and lanterns. Add: NO. 37, Xiangyuan Road, Hangzhou City, Zhejiang Province, China Tel: +86-189-1799-6096 It test Spatial, light intensity distribution curves on any cross section (can be shown Email: Engineering@Lisungroup.com under the rectangular coordinate system or polar coordinate system), spatial iso-intensity curve. (正文,段首顶格左对齐 10 号,段落之间空行) Lead inColorimeter CFL & LED Test CHROMA-2 Instruments Pocket Chroma Rev. 1/16/2019 Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com Test corners 1.Name of good: Test corners 2.Main application: Temperature rise test 3.Work condition: AC 220V~50Hz 4.Technical Parameters Test angle size: 800x800x1000mm Thermocouple: Thermocouple with a diameter less than 0.3mm Thermocouple arrangement: All drawn on a wire Copper for Temperature Testing: diameter 15mm, thickness 1mm(Brass plate) Temperature measuring point: 48 Test angle temperature measuring point: With 100*100mm covering Plywood: Thickness of about 20mm, the front is painted with no light black paint, and the back is pasted with gray film board. General requirements IEC60335-1 5.Basic configuration Test corners: 1 set Spare Brass plate 6.Installation connection After opening the box, connect the plug of thermocouple wire to the interface of temperature measuring. And connect the end of thermocouple wire with plug to the terminal of thermo-detector ’s rear cover. 7.Operation method Put the test sample on the test angle as required and on the power supply. Through the trunking, thermocouple leads the power to the terminal of -Page 1 - Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com thermo-detector ’s rear cover of the side. Measuring the temperature of each point of the current measurement surface -Page 2 -