Hashemite University
Faculty of Engineering / Dept. of Electrical Engineering
ُElectronic Lab –practical exam
Student name:
Date: 23/04/2018
Time: 30 Minutes.
Student ID:
( note you should always put the units )
Q1 (Form B1)
For the circuit shown below. (20 marks)
A. Implement the circuit. (Show me):
B. Plot the input and the output waveforms on the same graph showing the
amplitude values for each signal.
C. Name the circuit.
D. Find experimentally the following parameters.
Parameter
VB
VC
VBE
Vin
Vo
Av
Ө
AvdB
FL
Value
VCC
15V
R1
R3
10kohm
3.9kohm
C2
C1
Q1
2.2uF
2N3904
2.2uF
Vin
R2
150mV 5kHz 0Deg
4.7kohm
RE1
150ohm
C3
RE2
2.7kohm
1uF
Rin
Hashemite University
Faculty of Engineering / Dept. of Electrical Engineering
ُElectronic Lab –practical exam
Student name:
Date: 23/4/2018
Time: 30
Minuets.
Student ID:
( note you should always put the units )
Q1 (Form A1)
For the circuit shown below. (20 marks)
A. Implement the circuit. (Show me)
B. Plot the input and the output waveforms on the same graph showing the
amplitude values for each signal.
C. Name the circuit.
D. Find experimentally the following parameters.
Parameter
VE
VC
VCE
Vin
Vo A v
AvdB
Ө
FH
Value
VCC
15V
R1
R3
10kohm
3.9kohm
C2
C1
Q1
2.2uF
2N3904
2.2uF
Vin
R2
200mV 5kHz 0Deg
4.7kohm
RE1
150ohm
C3
RE2
2.7kohm
1uF
Rin
Hashemite University
Faculty of Engineering / Dept. of Electrical Engineering
Electronic Lab –practical exam
Student name:
Date: 29/07/2018
Time: 30 Minutes.
Student ID:
(Note you should always put the units)
Q1 (Form A)
For the circuit shown below (20 marks)
A. Implement the circuit
B. Plot the input and the output waveforms on the same graph showing the
amplitude values for each signal.
C. Name this circuit.
D. Find experimentally the following values.
Parameter
Value
Vin
Vo
Av
VRF
∆t
FH
Vin max
Rin
Hashemite University
Faculty of Engineering / Dept. of Electrical Engineering
Electronic Lab –practical exam
Student name:
Date: 29/07/2018 Time: 30 Minutes.
Student ID:
(Note you should always put the units)
Q1 (Form B)
For the circuit shown below (20 marks)
A. Implement the circuit.
B. Plot the input and the output waveforms on the same graph showing the
amplitude values for each signal.
C. Name this circuit.
D. Find experimentally the following values.
Parameter
Value
Vin
Vo
Av
VRF
∆t
FH
Vin max
Rin