Argon manualWEB

advertisement
USER MANUAL
2
System RequirementS
6u
1. Operation System
Windows XP / Windows Vista / Windows 7 / Windows 8 / Windows 8.1
2. Free USB 1.1/ 2.0 port
3. CD-ROM drive
4. 50 MB free hard disk space
It’s all about evolution
InstallatiOn InstructiOnS
1. Plug USB connector of ARGON OCELOTE to a USB port of your PC
2. Insert the enclosed driver CD into your CD-ROM drive
(or download the driver from www.ozonegaming.com )
3. Double click “Setup.exe” to start the installation program.
Click “Next” to continue
4. Select the folder to save the driver and click “Next” to continue
5. Installation run automatically; click “Finish” to complete the installation
1
MOUSE CONFIGURATION
1. Advanced Settings:
1. Polling Rate Setting
2. On-To-Go Speed Setting, Speed of repeat mouse function (refer to
2.6 Mouse Function)
3. Reset to Factory Default: In the pop-up window, click “OK” to
APPLY the change
ARGON OCELOTE DRIVER
2
3
2. BUTTON Settings:
1. MACRO MANAGER
Macro is a series of desired keystrokes which can be recorded and
assigned to the keyboard. In other words, it’s a series of key press
and releases, in which every pressed keystrokes, released keystrokes,
and delays are been recorded. The delay is the duration between the
keys “press and release” or “release and press”, that is automatically
recorded and output once the macro is assigned.
4
5
Create and Assign a Macro
1. Select a button and click ”Macro Manager” from the menu
6
2. In the pop-up window, click “NEW” and enter a name for the
macro, then start to create the macro
3. Select the options of “Record Delays” and set the “Loop Times”
from the right column if needed
4. Click ”Start Record” type the desired key combination and click
“Stop Record” when you are finished. If needed “Right Click” on one
of the keys in the sequence to edit it. Click “OK” to continue
5. Assign a created “Macro” to a “Button” and click “APPLY” to
complete the setting
7
8
2. Multimedia
3. PrOfile Switching
1. Select a button and click ”Multimedia” from the menu
2. Select the desired function in the sub-menu and click “APPLY” to
confirm the setting
1. Select a button and click ”Profile” from the menu
2. Select the desired function in the sub-menu and click “APPLY” to
confirm the setting. Profile Cycle: Cycle Switching /
Profile Up: Profile + / Profile Down: Profile -
9
4. CPI/DPI Switching
5. WindOws Management
1. Select a button and click ”CPI Switch” from the menu
2. Select the desired function in the sub-menu and click “APPLY” to
confirm the setting. CPI Cycle: Cycle Switching / CPI Up: DPI level +
/ CPI Down: DPI level -
1. Select a button and click ”Windows” from the menu
2. Select the desired function in the sub-menu and click “APPLY” to
confirm the setting
10
11
6. MOuse FunctiOns
1. Select a button and click the desired mouse function in the menu:
“Click”, “Menu”, “Wheel Click”, “Double-click”, “IE Forward”, “IE
Backward”, “Scroll Up”, “Scroll Down”, “Tilt Left”, “Tilt Right”,
“Fire Button”, “On-To-Go (This is a combination button used to get
a continuous mouse function: Hold down this button together with
any other button with an assigned mouse function to get a continuous
repeated mouse function)”.
2. Then, click “APPLY” to confirm the setting
7. Assign a ShOrtcut
Single mouse click to activate a combination of keys which used often
1. Select a button and click “Assign a Shortcut” from the menu
2. Select and enter the desired combination of keys from the pop-up
window and click “OK” to continue
3. Click “APPLY” to complete the setting.
Ex. now the “Ctrl” + “V” will be executed
12
13
8. ButtOn Off:
Disable the buttOn functiOn
1. Select a button and click ”Button Off” from the menu
2. Then, click “APPLY” to confirm the setting
14
9. Assign a Launch
Single mouse click to launch your chosen PC software
1. Select a button and click “Assign a Launch” from the menu
2. In the pop-up window, select the desired software from the folder
and click “OK” to continue
3. Click “APPLY” to complete the setting
15
10. WindOws Key
1. Select a button and click ”Windows Key” from the menu
2. Then, click “APPLY” to confirm the setting
16
11. OPEN DRIVER
1. Select a button and click ”Open Driver” from the menu for quick
access to the Mouse Configuration Driver
2. Then, click “APPLY” to confirm the setting
17
3. PrOfile Setting
1. Create PrOfile
Each configuration profile corresponds to a personalized mouse
setting. Therefore, this powerful feature allows you to create specific
configuration profiles for each game.
The defined configuration profile can be saved on your PC (we strongly
suggest that you name the configuration file according to the name of
the related game). The driver provides 5 profiles: Profile 1 to Profile 5.
The default path of the saved configurations is in the “Config” folder
under the “Driver Installation Directory”, in which you can find the 5
corresponding files for the 5 profiles on the main skin.
1. Click “Create Profile” to create a personalized PROFILE NAME
and PATH to EXECUTE the GAME (setup the Game which will be
connected to the profile, then when you execute the Game the driver
will select the correct Profile for that specific Game)
2. Click “OK” to confirm the changes
3. Click “APPLY” to APPLY the changes
On the right hand side of the Profile buttons you will find the following
options: “Create Profile”, “Load Profile”, “Save Profile”, and “Edit
Profile” used to set up your personalized configurations.
You can create a variety of configurations and save them for future use.
Even if you change to a different computer, you don’t have to repeat
the process because you can easily import your previously saved
configurations.
18
19
20
2. LOad PrOfile
3. SAVE PrOfile
1. Click “Load Profile” to execute a previous setting of a certain profile
2. Select the profile to be imported and click “Open” in the pop-up
window
3. Click “APPLY” to apply the changes
1. Select the profile that you want to save and click “Save Profile”
2. In the pop-up window, give a personalized name to the profile and
click “Save”
3. Click “APPLY” to apply the changes
21
22
4. Edit PrOfile
4. Sensitivity Setting
1. Click “Edit Profile” to modify your personalized PROFILE NAME
and EXECUTABLE GAME PATH
2. Click “OK” to confirm the changes
3. Click “APPLY” to apply the changes
1. Horizontal X and vertical Y - direction moving speed settings
2. Click on “XY synchronous working” for a synchronous direction
moving option
3. DPI Settings: Click on “Orange Circle” for DPI lock /
Set your personalized DPI using the sliding Bar
4. Click “APPLY” to confirm the settings
23
5. System Settings
6. Light Settings
1.
2.
3.
4.
5.
1. Choose Single Color to select from one of the default colors or
Select Custom Color to select a specific color of your choice. You
can chose from 16.8 million RGB colors.
2. Choose Brightness ON/OFF and select the brightness amount
from 0 to 100. Or Choose Breathing Effects ON/OFF and select
the speed of the breathing effect.
2. Click “APPLY” to confirm the settings
24
Double Click Speed Settings
Windows Pointer Speed & Precision Settings
Tilt Wheel Scroll Speed Settings
Mouse Wheel Scroll Speed Settings & Scroll by single page
Click “APPLY” to confirm the settings
25
BUTTONS LAYOUT
1
9
3
2
8
4
5
6
7
4
DEFAULT BUTTON ASSIGNMENT
1 - Click
2 - Menu
3 - Wheel Click
4 - IE Forward
5 - IE Backward
6 - CPI Up
7 - CPI Down
8 - Scroll Down
9 - Scroll Up
k
u
5
Left/Right Hand User Swap
Via Software; search for BUTTON SETTINGS and choose from
Hand Selection:
(install the driver to assign different functions to each button)
26
27
ARGON DRIVER
Please Download ARGON Driver from our website:
www.ozonegaming.com
INSTRUCTIONS:
m
2
1. Plugin the USB connector of Argon into a free USB port.
2. Connect to the internet and enter www.ozonegaming.com
3. At the bottom of the page in the footer menu under “SUPPORT”
click on “DOWNLOADS”.
4. Here you will see a list of products, look for Argon and
download the DRIVER.
It’s all about evolution
28
©2014 OZONE Gaming Gear. All rights reserved.
Download