*
DIIIRT
ExpertAire TM Series Dehumidifiers
1&1111
Project:
Wingate
Location:
Orlando, Florida
Unit Model #:
LC02R7NNANDLAAD
System Tag:
DHU-1
Date:
4/12/2017
DESERT AIRE REPRESENTATIVE
Firm:
Nelson & Company
Address:
1180 Harwood Ave
City, State Zip Code:
Phone:
Fax:
(407) 625-8436
0
Contact:
E-Mail:
Orlando, FL, 32708
Ryan McDaniel
rmcdaniel@ncjax.com
Title Page (LC) 201511
�1'
DIIIDT
1&1n1
ExpertAire TM Series Dehumidifiers
Section 1
Product Scope & Details
• Product Scope
• Engineering Specialties
• Calculated Performance Data Information
Product Scope and Details (LC) 201605
*
DIIIIIT
J&IRI
ExpertAire TM Series Dehumidifiers
PRODUCT SCOPE
Quantity:
Model#:
Tag#:
Unit Weight:
1
LC02R7NNANDLAAD
DHU-1
6651bs
Capacities:
•
.
•
•
.•
•
Supply Air:
950 CFM
Outside Air:
0 CFM
Dehumidification
EAT: 80.0 °F DB / 66.6 °F WB
Total Cooling Capacity: 25 MBH
Total Sensible Capacity: 17.24 MBH
Moisture Removal Capacity:
7.42 lb/hr
Total Heat of Rejection: 31 MBH
Refrigerant Type:
R-410A
Scroll Compressor(s), Nominal Tons:
Hot Gas Reheat Condenser Coil
Coil Coating: Standard Coating
Receiver w/ Flooding Valve
Hot Gas Bypass Included
Supply Airflow Configuration:
•
•
•
•
Supply Discharge Location:
Outdoor Intake Location:
0.5 in WC
Supply ESP:
1.34 in WC
Supply TSP:
Standard Filters: MERV 8
Enclosure:
•
•
•
02
Horizontal
Horizontal
Air Filters:
•
•
•
•
•
•
Main Power (V/Ph/Hz): 208/3/60
MCA (Amps): 13
MOPD (Amps): 20
SCCR (kA):
65
When protected by Class J, T, or RK1 fuses
False
Disconnect:
Controls:
•
•
•
•
•
Model CM3530
Temp & RH Sensors: Duct Mount
Occupancy Timer w/ BMS Override
Remote Display Terminal: Included
None
BMS Compatibility:
Air Cooled Condenser:
DX Refrigeration System:
•
•
•
•
•
•
Unit Electrical:
Location: Indoor
Separate Electrical Compartment
Galvanneal with Powder Coat Finish
•
•
•
•
•
•
•
•
•
Model #: RC5S008C2H40400
# of Fans: 1
Unit Weight: 199 lbs
Voltage/Phase/Hz - 208/230-1-60
MCA (Amps): 2
MOPD (Amps): 3
SCCR (Amps): 5kA
Rated Ambient Condition - 95 °F
Coil -Cu Tubing w/ Al Fins
Auxiliary Heat:
•
•
•
None
Capacity:
NIA
Control Signal: 0-10 VDC
Warranties (Parts Only):
•
•
•
2 years
Standard Warranty:
Compressor Warranty: 2 Years
Air Side Coil Warranty: 2 Years
Condensate Drain Pan:
•
•
20-Gauge Stainless Steel, Sloped
1 in. MPT Drain Connection
Product Scope and Details (LC) 201605
*
DIIIDT
1&1R1
ExpertAire TM Series Dehumidifiers
ENGINEERED SPECIALTIES
Product Scope and Details (LC) 201605
*
DIIIIDT
/&11111
ExpertAire ™ Series Dehumidifiers
CALCULATED PERFORMANCE DATA INFORMATION
Capacity and efficiency values indicated are calculated based on specified input data and are
estimates of nominal performance for the specific design. Due to the nature of mechanical
equipment, variations in production components and configuration may result in variances from
estimated data for a particular production unit.
Application variables in the system which the unit is attached will affect unit performance. Unit
performance estimates shown are based on calculations and laboratory testing in controlled
conditions. Installation conditions in the particular application may impact performance.
Desert Aire has comprehensive development process and quality control processes that help
to assure the best possible correlation in the calculated values indicated, however, capacity
and efficiency at the conditions specified are not guaranteed. Due to Desert Aire initiatives for
continuous improvement and necessary component adjustments, software and/or unit design
may be changed without notice.
Any indication of certified performance point or certification programs are indicators that
samples of the production unit design that have been submitted and/or tested based on the
stated certification test procedures and certification program rules. This is not a certification of
a particular unit performance and does not constitute a warranty or guarantee of performance
for any particular production unit at any condition.
Performance software and its output are provided "as is" and any express or implied
warranties, including, but not limited to, the implied warranties of merchantability of fitness for a
particular purpose are not provided. In no event shall Desert Aire be liable for any direct,
indirect, incidental, special, exemplary, or consequential damages (including, but not limited to,
procurement of substitute goods or services; loss of use, data, or profits; or business
interruption) however caused and on any theory of liability, whether in contract, strict liability, or
tort (including negligence or otherwise) arising in any way out of the use of this software and its
output.
Product Scope and Details (LC) 201605
MCA/MOPD Calculation
Project Wingate
Pool Price 2017_040
Tag DHU-1
Series LC02
Aux Heat No Aux Heat Selected
Refrigerant R-41 0A
SIA Airflow
S/A Blower Motor
E/A Airflow
E/A Blower Motor 1
E/A Blower Motor 2
Voltage
Compressor 1
Compressor 2
Compressor 3
Compressor 4
S/A Blwr Motor
E/A Blwr Motor 1
E/A Blwr Motor 2
Electric Heater (single point)
Total Transformer (VA)
950
0.5
0
0
0
cfm@
0.5
!in ESP
cfm@
N/A
!in ESP
N/A
lkWIMCA
HP
HP
HP
208/3/60
FLA
8.3
0.0
0.0
0.0
2.0
0.0
0.0
N/A
115
Unit MCA ___1_3 __-i Amps
�
,
_Amps
20
Unit MOPD
Electric Heater lfor seoarate oower circuit)
N/A
kW
N/A
FLA
N/A
MCA
*
DIIIDT
1&1111
ExpertAire TM Series Dehumidifiers
Section 2
Installation Overview
• Contractor's Scope of Work
• External System Wiring
• Unit Connections and Clearances
Installation Overview (LC) 201605
*
DIEIIIIT
/AIDE
ExpertAire TM Series Dehumidifiers
INSTALLING CONTRACTOR'S SCOPE OF WORK
The following scope of work is provided as an overview of the installing contractor's
responsibility for proper installation and operation of the Desert Aire unit being provided. This
scope outlines requirements directly related to the Desert Aire unit. It is the contractor's
responsibility to review all Installation and Operation manuals, mechanical drawing and or
other related documentation provided by others for complete implementation of the Desert Aire
unit into the building envelope.
•
Personnel certified to service refrigeration equipment per city, state, and federal
guidelines effective 1/1/92.
• Furnish and install mounting apparatus for dehumidifier.
• Furnish and install all related ductwork. Including Outside Air Damper if required.
• Furnish and install all necessary water piping and piping specialties; such as, condenser
water, condensate drain, P-trap, hot water coil, steam coil, balancing valves, and control
valves.
• Furnish and install all electrical wiring and controls per "External System Wiring" sheet
included within this section.
• Furnish and install remote mounted exhaust fan or space pressure relief (as required).
Wire to unit per "External System Wiring" sheet for unit control of exhaust fan based on
occupancy schedule.
• Install outdoor remote condenser. Furnish and install mounting apparatus for remote
condenser along with line sets and additional refrigerant charge per Installation and
Operation Manual.
- Caution: Standard ExpertAire ™ series dehumidifiers are internally configured for
line sets up to 100' and a condenser located up to 1O' below the dehumidifier.
Please contact the factory for assistance if the field installed line set configuration
will exceed either of these values. See unit label for actual field charge required.
• Balance the system's airflow per Desert Aire's Instruction manual.
Complete unit start-up per "Installation and Operation Manual" and complete Start-up Report.
Return Start-up Report to Desert Aire Corp. to activate the warranty.
Installation and Operation (l&O) manuals are provided with the unit at time of delivery. If l&O
Manuals are required before delivery they can be obtained by:
- Download at Desert Aire Corp. Web site at
- Contacting your local Desert Aire Corp. Representative
Installation Overview (LC} 201605
�1'
DIIIRT
JAi I
ExpertAire TM Series Dehumidifiers
EXTERNAL SYSTEM WIRING
This external system-wiring sheet is provided as a summary detailing the external wiring for
proper system operation. All listed components are field installed and wired to the unit's
terminal block by the installing contractor. Others supply components unless stated otherwise.
HIGH VOLTAGE
•
•
•
•
•
•
•
•
Dehumidifier Supply Power
LOW VOLTAGE
Remote Condenser Supply Power
Temperature & Humidity Sensor
- Duct Mounted
- Provided by Desert Aire
- Field Installed
General Fault Alarm for BMS
- Optional for contractor to utilize
Occupancy
- Optional input for contractor to utilize with binary contact closure,
- Start/Stop by BMS, or
- Occupancy Timed Scheduling on DA controller
Smoke Detector (by others) if applicable
- See wiring diagram for proper termination & rating
- Optional for contractor to utilize
External Auxiliary Heater
- Operated by the unit's controller
External Auxiliary Heater Interlock
- Operated by the unit's controller
Installation Overview (LC) 201605
,(1'
DIIIDT
JAIDI
ExpertAire TM Series Dehumidifiers
UNIT CONNECTIONS & CLEARANCES
r - -�
Utility Sid
Utility
Remote Condenser Refrigerant Lines
Water Piping Connection(s)
Condensate Drain
Supply Air Discharge
Outdoor Intake
Location
Left
Not Applicable
Left
Horizontal
Horizontal
Notes
1.
Electrical door clearance typically requires a minimum of 36" clearance on Utility side shown. Refer to
local codes.
2. 36" clearance recommended around all sides for maintenance and service access.
3. Units equipped with electrical heater require a minimum of 6"clearance in all directions.
4. Install the unit on a sturdy, level mounting base or platform that will prevent vibration and sound
transmission.
Installation Overview (LC) 201605
*
DIIIRT
/AIRI
ExpertAire TM Series Dehumidifiers
SEQUENCE OF OPERA T/ON
Supply Blower Runs Continuously.
CIRCUIT HEAT SINK CONFIGURATION:
Compressor Starts On a Call for dehumidification and or cooling. The system has two
configurable circuits as follows:
Circuit "A" Priority: Hot Gas Reheat / Air Cooled Remote Condenser
Dehumidification
First Stage: Unit starts and runs in respective order listed in the "Circuit Heat Sink
Configuration Section".
Second Stage: Circuit "B" starts and runs in respective order listed in the "Circuit Heat Sink
Configuration Section".
Cooling
First Stage: The Unit will start and operate with the air reheat off and reject its heat to
following condenser(s), in respective order, listed in the "Circuit Heat Sink Configuration
Section".
Air Heating
First Stage: During a call for dehumidification, unit will operate in the air reheat mode.
Second Stage: The auxiliary heater is activated by a binary control signal from the dehumidifier
Pool Water Heating
First Stage : An auxiliary pool/spa heater dry contactor will be closed to activate the pool
heater by others.
Exhaust and Outside Air
An exhaust fan dry contact signals the external exhaust fan off. Ventilation air is controlled by
others.
EMERGENCY SYSTEM SHUTDOWN
Terminal points are available for a binary contact closure by others to control unit shutdown by
smoke detector or other similar device. An open contact in the 24 VAC circuit will deactivate
motors, fans and compressors.
Sequence of Operation (LC) 201605
•
-·
f\l'f•I WU
...
-
•
-'l
Industry, public works, municipal services and indoor pools are just a few of the
many applications that our ExpertAireJN dehumidifiers effectively cover. ExpertAire™
is an enduring product line for Desert Aire that represents the culmination of our
core expertise in dehumidification. The ability of these units to be applied to diverse
applications combined with their flexibility to appropriately regulate the introduction
of outdoor air to a facility makes them a true energy efficient workhorse that
consistently performs time and again.
OPTIMIZING SOLUTIONS THROUGH SUPERIOR DEHUMIDIACATI0N TECH0L0GY
J
8 11 T
T1
AHRI
AHRI STANDARD 910 - MOISTURE
REMOVAL CAPACITY
The Air-Conditioning, Heating and Refrigeration Institute (AHRI) created
Standard 910 as an industry-wide standard for manufacturers, engi­
neers, installers, contractors and end users. The purpose o f th is
st a n d a r d w a s t o e s t a b l i s h , forindoorpool dehumidifiers: defi­
nitions; classifications; requirements for testing and rating; minimum data
requirements for published ratings; operating requirements; marking
and nameplate data; and conformance conditions.
Standard 910 has created new provisions to measure the capacity and
effectiveness of pool dehumidifiers. For example, the standard defines
Moisture Removal Capacity (MRC) as the amount of condensate a unit
produces, as impacted by coils, circulating fans and other components
in the air stream, excluding supplementary heating, cooling or outdoor
air, and is expressed in lb/h (kg/h). Also, it defines Moisture Removal
Efficiency (MRE) as a ratio of the MRC divided by the unit's power input
at any given set of rating conditions, and is expressed in lbs of mois­
ture/kWh (kgs of moisture/k Wh).
ExPERTAIRE'M MmsAHRI 910
™
Desert Aire's ExpertAire Series dehumidifiers have been designed
with this standard in mind. First, we've used the latest coil design tech­
nology to increase evaporator and condenser capacity while simulta­
neously reducing their pressure drop. This combination yields the
highest MRE available.
Secondly, the coils were designed from the onset to use R410a refrigerant
The entire industry was required to change over to this refrigerant by 2010.
In 2006, we had already introduced our ExpertAire™ series with R410a,
thus optimizing this system's design and performance well in advance
of the deadline.
™
Desert Aire has also submitted the ExpertAire Series to an independ­
ent testing laboratory for positive verification of its MRC's and MRE'S.
The AHRI Certified seal is your reassurance of our unit's dehumidification
capabilities
FEATURES
Many applications need the removal of unwanted moisture. If
unchecked, this moisture causes condensation on walls, windows and
floors. This can create problems with a building's structural integrity
and consequently endanger customers and employees.
CERTIFIED DEHUMIDIFIERS
In manufacturing, a humid environment can also contribute to lowered
productivity by damaging product or increasing cycle times.
™
Desert Aire's ExpertAire Series products are designed for applica­
tions with air temperatures between 65 ° and 95 ° F (18 ° and 35 ° C)
that require moisture removal between 4 and 100 lbs (2 and 45 kg)
per hour.
"'
An ExpertAire dehumidifier optimizes moisture removal by using a
specially designed coil to maximize the system's latent capability, thus
yielding 3 to 4 times the moisture removal capacity over a standard
air conditioning system. Each system also includes a hot gas reheat coil
that is sized for 100% rejection of the recovered energy. This coil allows
the unit to continue to dehumidify without over-cooling the space.
These systems also feature an optional capacity control design which
protects the coil from freezing during low temperature/low load oper­
ation. In addition, the system helps to eliminate high load nuisance
service trips by re-balancing the refrigerant system. ExpertAire™ models
are fully protected with IEC starters, overloads and refrigerant switches.
ExpertAireTM dehumidifiers feature scroll compressors for high efficiency
and long life. Other components are also designed for longevity such as
our cabinet which is manufactured from galvanneal with a high impact,
powder coat textured paint finish.
A distinct feature of these dehumidifiers is that they can be equipped
with an outdoor air intake connection to help meet ASH RAE 62 stan­
dards. Outdoor air is introduced after the evaporator coil but prior to the
reheat condenser to guarantee moisture removal capacities. In
addition, the units are equipped with an evaporator bypass damper.
This feature automatically adjusts the evaporator air volume to main­
tain proper air distribution over the coil in all modes of operation.
Our ExpertAire TM dehumidifiers also offer a control that enables the
unit to completely close the outdoor air damper when a facility is in an
unoccupied mode. Because no outdoor air is being introduced for
ventilation, this feature eliminates the need to fur ther condition
the outdoor air (heating, dehumidification or cooling) which in
return, helps save energy.
REFRIGERATION CONAGURATIONS
™
ExpertAire is available in one of the following five configurations.
This is the standard design that removes moisture
from the air at the evaporator coil and reheats the dehumidified
air before returning it to the space.
This is a
combination of all heat sink options available. This option is chosen
when pool water heating and air condition are all required. All heat
sinks are sized to reject 100% of the recovered energy.
azv
az'C
�
EVAPORATOR
REHEAT
�
az'.?
ala?
In addition to the reheat coil, a water condensing
coil is added to the circuit Either circuit can become the primary heat
sink allowing the circuit's latent and sensible energy to be directed to a
water source or returned to the air.
EVAPORATOR
REHEAT
WATER CONDENSER
REHEAT
EVAPORATOR
a>
B-
COMPRESSOR
WATER CONDENSER
a?
a?
a?
a?
�:!-1
F,
T
RE
i; � DE M is :R
- _ _
◄ r":""'}--.J
('
Comprised of a partially sized water coil, a full sized reheat coil, a full
sized remote condenser and two three-way valves, this circuit provides
the most flexibility in heat rejection. The first three-way valve always
provides the option to send refrigerant to the water condenser. After
leaving the water condenser, the refrigerant is then sent to a second
three-way valve which can transfer the remaining heat to either a re­
heat coil or remote condenser. However, if there is no call for water
heating, the first three-way valve delivers the refrigerant to the second
three-way valve which can then reject all energy either to the reheat
coil or remote condenser.
D WATER FLOW
EVAPORATOR
This option allows the
dehumidification process to continue when cooling is required in the
zone being conditioned.
EVAPORATOR
REHEAT
PARTIAL
WATER CONDENSER
REHEAT
a?
a>
a>
IA
'¥1JI
C�,
L::J
�:NSER
For more information visit www.desert-aire.com
R
IDREMOTE
CONDENSER
______.
STANDARD ExPERTAIRE"" SERIES FEATURES
4 • MERV 8 filters
R410a standard refrigerant
standard rifled tube, lanced fin coils
die-formed, aluminum, extruded fins are damage resistant
stainless steel pan minimizes corrosion
sloped design avoids hazardous puddling
R410a standard refrigerant
die-formed, aluminum, fins are damage resistant
adequate coil separation avoids re-hydration
auxiliary heat options are internal to horizontal (LC) units
and external to vertical (LV) units.
electric heat
hot water coil
•
•
premium high-efficiency blower motors available to help
achieve LEED points
optional Electrofin E-coating coil coating available for corrosive
environments
single phase available on 1-8 ton units
unit-mounted optional power disconnects (fused and non-fused)
contact factory for non-standard options
units available in 1-15 tons
All referenced publications are available as PDF files at
www.desert-aire.com. Supporting literature includes:
Technical Bulletin 5 - Ventilation Air for Indoor Pools
Technical Bulletin 7 - Indoor Pool Dehumidification
Technical Bulletin 8 - Pool Room Design Summary
Application Note 10 - Swimming Pool Dehumidifier Sizing
Application Note 11 - Industrial Dehumidifier Sizing
Application Note 12- Water Treatment Plant and Pumping
Station Dehumidifier Sizing
-
single point connection
horizontal (LC) unit panels constructed of sturdy 18-gauge
galvanneal steel
vertical (LV) unit panels constructed of sturdy 20-gauge
galvanneal steel
removable side panels provide easy access to all serviceable
elements
panels coated with high-yield polyester, textured,
fingerprint-resistant powder-coat paint
paint meets:
• 1000-hour salt spray test
• 160 in-lb direct impact resistance
• 1000-hour humidity resistance
closed cell foam insulation superior to fiberglass insulation eliminates fiber-release into air
insulation meets:
• ASlM mold, mildew, moisture resistance specifications
• NFPA fire specifications
• ULspecifications
•
reheat only
reheat and water
reheat and remote condenser ready
reheat and water and remote condenser ready
reheat and partial water and remote condenser ready
Slimdard ExpertAire "' Horizontal Unit with Optional Outdoor Air Box
•..-----·
-
.
C
•
E:xperWre "' HoriLontal Unit with Quick Disconnect and ProtecUve Hood on
Outdoor AirBox
OPTIMIZING SOLUTIONS THROUGH SUPERIOR DEHUMIDIACATI0N TECHNOLOGY
N120 W18485 Freistadt Road, Germantown, WI 53022 sales@desert-aire.com
Ph: (262) 946-7400 - www.desert-aire.com
450-a 2014/01
-
U ADVANCED COMMUNICATIONS CAPABILITIES
cl EASY INSTALLATION ANO OPERATION ,J CONTINUOUS MONITORING
Advanced LC/LV
Microprocessor Controller
CM3530 Series Remote Display Terminal (RDT)
CM3530 Controller Used on LC/L V Dehumidifier
EATURES
• Advanced program capabilities.
• Optional remote user interface.
• Precise temperature and humidity control.
Wall Mount
Temperature &
Humidity Sensor
MS COMMUNICATION MODULES
LoNWORKs® - Echelon's LoNWOAKs® is a dominant solution of con­
trol in industry, offices, homes and transport. Electric standard
supported is ITT10.
Modbus® - One of the most widely used protocols. Supports
Modbus Slave, RTU mode; communications standard RS485.
ROERING CODE
Controller and Sensor with RDT
0 SA3§38'NQ E>US+ El1:Jet Matml lCRlJ:1 & RH 89AS&f=­
D
CA3530WD-WALL - Wall Mount Temp & RH Sensor
ROT - r-elllilte display-termin8I with2flft. eord
BACnet™ MS/TP and BACnet™ Ethernet - Based on EIA-485 and
Ethernet™ standards. Connection is possible through the following
networks:
• SNMP v1, v2, v3 networks
• BACnet™, Ethernet™, BACnet™/IP networks,
BACnet™ MS/fP
• LAN or Internet
Duct Mount
Temperature &
Humidity Sensor
Communication Conliguration
D
Standard - No BMS Communication
LonWorks® Mod
All trademarks hereby referenced are the property of their respective owners.
MS COMMUNICATION MODULES - DETAILS
BACnetl'III MS/TP
If the CM3530 was purchased with the BACnet MS/TP option, the
BACnet Device Instance and Station Address will need to be set
before connection to the control network. This is because the
Station Address is set to O as a default, and will conflict with the
device on the control network already set to 0.
Defining the station address prior to unit shipment will allow Desert
Aire to correctly set the address. If the value is not known prior to
the goods shipping, then the contractor must alter these default
settings during unit commissioning. A software utility program
will need to be used, allowing access to these settings. For more
information, refer to the PC01000BAO cut sheet shipped with the
dehumidifier. Download the CM3530 BACnet Point List from the
Desert Aire website (www.desert-aire.com).
BACnet™ Ethernet
If the CM3530 was purchased with the BACnet Ethernet option, it is
strongly recommended that the network administrator be contacted,
as the incorrect configuration of the Ethernet card may temporarily
shut down the entire network. For the correct operation of the
Ethernet card, a number of basic parameters need to be set, such
as the IP address and Netmask. Each device connected to an
Ethernet network must have a unique IP address.
LonWort<s®
If the CM3530 was purchased with the LonWorks option, the
connection to the control network can be done without controller
modification.
For more information, refer to the PC01OOOOFO cut sheet shipped
with the dehumidifier. The CM3530 XIF file for system configuration,
as well as the CM3530 LON point list, is available from the Desert
Aire website (www.desert-aire.com).
Modbus® Slave
If the CM3530 was purchased with the Moclbus option, the controller
network address and baud rate need to be set in the controller for
proper communication operation. The default settings as shipped
are 9600 for the baud rate and the address is 0.
Refer to the CM3530 controller manual for address and baud rate
setting instructions. For more information, refer to the
PCOS004850 cut sheet shipped with the dehumidifier. Download
the Modbus Point List from the Desert Aire website at
www.desert-aire.com.
The Ethernet card is supplied with the DHCP function already
active. Therefore, in a network served by a DHCP server, the
Ethernet card will automatically acquire the necessary parameters
without requiring configuration. In the case of a network without
DHCP, these parameters need to be configured manually. For more
information, refer to the PC01000W*O cut sheet shipped with the
dehumidifier. Download the CM3530 BACnet Ethernet Point List
from the Desert Aire website (www.desert-aire.com).
N120 W18485 Freistadt Road
Germantown, WI 53022
PH: (262) 946-7400
FAX: (262) 946-7401
www.desert-aire.com
E-mail: info@desert-aire.com
c®us
LISTED
320 2011/11
Eff/CJE#T
RELIABLE
IIVLTIPlE REHl/6E1lAllON CIRCUITS
Remote Condensers
EMOTE CONDENSERS
DESERT AIRE's Remote Condensers
are designed with a commitment to excellence
that will provide you with years of reliable service.
. ..
All DESERT AIRE equipment is consistently manufactured to
high performance standards for efficient, reliable service.
Our Remote Condensers are easy to install too.
IGH PERFORMANCE, DURABILITY & EFFICIENCY
COILS - Round Tube Coils-Enhanced tubing, advanced sinusoidal
fin design for optimal performance. Extensive use of 5/16" and
3/8" diameter tubing keeps refrigerant charge to a minimum.
Optional, ElectroFin E-Coat provides a uniform, flexible coating
over the entire coil with immeasurable impact on thermal
conductivity. 100% coverage is assured by the application
process, even in the hard to reach center portions of the coil,
without bridging between the fins. We recommend the application
anytime a remote condenser is located near a salt water coast or
a potential source of corrosive airborne particles.
FANS - Swept fan blades are designed as part of the motor, not
an addition to it. Precise matching of these two components
increases energy efficiency and reduces sound pressure to
lower levels.
ASY INSTALLATION
After uncrating, the condenser easily lifts into place with the
use of eye bolts located on top of the unit. At ground level, the
condenser can rest on a solid surface such as a concrete slab.
On roofs, the unit should be placed on channels or an I-beam
frame.
DESERT AIRE has a condenser for every application. Our com­
plete line of direct-drive condensers compliments the wide
range of our dehumidification offerings.
Head pressure controls automatically maintain condensing
pressure at ambient temperatures as low as -20° F.
ULTIPLE REFRIGERATION CIRCUITS
mised energy efficiency, low sound, and the longest trouble free
life available. The RCB & RCU series have fully enclosed motor
lead raceways to protect wiring.
DESERT AIRE's large commercial condensers are available
in single or dual-circuit designs to match the needs of the
dehumidifier. Each condenser fan is independently controlled
to limit refrigeration migration and maintain design condensing
temperatures.
CABINETS - G90 galvanized steel cabinet provides years of
durable finish protection and aesthetics. The RCB & RCU series
have tall venturi fan panels to add to our uncompromised
energy efficiency and ultra-low sound. Fully baffled fan cells
prevent "wind milling" and enhance performance.
Elevation above sea level has an effect on the performance of
air-cooled condensers. The unit capacities
shown in the Performance Table must be
multiplied by the correction factors in
Table 1 to correct for various elevations.
MOTORS - Direct drive external rotor motors offer uncompro­
DIii
.A IDIE
NOTES: All data contained in this document is subject to change without notice. Please &onsun factory for most current data.
Condensers in this brochure are limited to an elevation differsnce of 10 feet (RC below) and a maximum linear distance of
50 feel. Consult fa&lory for high-lift model options.
OUND ANO POWER
Figure 1 - ROC Model Matrix
RC STANDARD SERIES
RC
Desert Aire's RC series of condensers are for customers seeking
the most economical solution for their capacity requirements.
This series of condensers offer quality sound and power benefits.
Enhanced motor technology using an 1100 RPM blower/fan
combination affords lower noise levels and significant energy
savings.
t
D
8
:-�
½
C
021
3
Width
S - Singte
D-Dual
5 - Small Std.
8 - Large Std.
U - Large Quiet
N
00000
Voltage
2 - 208-230/1/60
3 • 208-230/3/60
4 -460/3/60
5 -575/3/60
RCU QUIET SERIES
The RCU series offers exceptional sound, energy and capacity
solutions. Featuring 500 RPM motors coupled with specially
designed blades that are precisely mounted in a venturi to pro­
vide unprecedented low sound levels. While RCU condensers
may require more fans, these units actually require significantly
lower power consumption through their optimized blower effi­
ciency. (See Figures 2 and 3 for comparisons.)
Std. Capacity
MBH/1 °ID (@ 12 Ip,)
@35°F ,n
R-410A CoH Coating
& Refrigeration
K - EleciroFin coating
H- No coating
C: Std. Condenser
Assigned
Factory Code
STANDARD FEATURES
Standard equipment includes a door interlock and a main
terminal block for motor lead termination. The RC8 & RCU
series includes a main disconnect switch. Standard control
panels are rated at 10 kA SCCR when power is supplied with
class J fuses.
Figure 2 - Power Consumption Comparison
14 Fan 500 RPM Condenser and 10 Fan 1100 RPM Condenser
(80 MBH / 1 ° TD Capacity)
....,..,_.,.,.
RC
Standard Serles -10 Fan
I
15
LEVATION CORRECTION FACTORS
ELEVATION
(FEET)
CORRECTION
FACTOR
1,000 2,000 3,000 4,000 5,000 6,000 7,000
0.98
0.96
0.93
0.91
0.89
0.87
0.85
I
I
1"
5
RCU Quiel - - 14 Fan
0
30%
I
40%
I
50%
I
60%
I
70%
I
80%
I
90%
100%
Load Requirement (1 % of Maximum}
Table 1
Figure 3 - Unit Sound Data*
BO
75
RC Standard Series
65
; 60
g 55
so
45
40
0
4
6
8
Numbe< of Fans Running
10
12
• Graphed D8A values are sound ratings for ttie maximuTl number of fans lf1 operation per ROC measurad at 10 fl
14
LECTRICAL DATA
Model
�I ,
CFM
PHA��•� ��HASE
SINGLE
STANDARD
RC5S008C
2,792
0.9
2
3
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
RC5S013C
2,589
0.9
2
3
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.2 /n/a
RC5S018C
2,383
0.9
2
3
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.2/ n/a
RC5S024C
5,773
4.5
7
11
3.3
5
9
2.0
4
6
1.6
3
5
0.9/1.0
RC5S032C
5,557
4.5
7
11
3.3
5
9
2.0
4
6
1.6
3
5
0.9/1.0
RC5S039C
5,352
4.5
7
11
3.3
5
9
2.0
4
6
1.6
3
5
0.9/1.1
RC5S051C
10,259
9.2
11
16
6.6
9
9
4.0
6
8
3.2
5
6
1.9/2.2
RC5S063C
9,670
9.0
11
16
6.6
9
9
4.0
6
8
3.2
5
6
1.9/2.2
RC5S067C
11,235
9.0
11
16
6.6
9
12
4.0
6
8
3.2
5
6
1.9/2.1
RC5S079C
10,850
9.0
11
16
6.6
9
12
4.0
6
8
3.2
5
6
1.9/2.1
RC5S099C
16,672
13.5
16
20
9.9
12
15
6.0
8
10
4.8
6
8
2.8/3.1
RC5S113C
16,045
13.5
16
20
9.9
12
15
6.0
8
10
4.8
6
8
2.8/3.2
RC8S007C
11,376
n/a
n/a
n/a
6.8
10
16
3.6
5
9
3.1
5
8
n/a/1.4
RC85009C
11,033
n/a
n/a
n/a
6.8
10
16
3.6
5
9
3.1
5
8
n/a/1.4
0.7 In/a
RC8S011C
23,496
n/a
n/a
n/a
13.6
16.8
23
7.2
9
13
6.2
9
12
n/a/2.7
RC85015C
22,752
n/a
n/a
n/a
13.6
16.8
23
7.2
9
13
6.2
9
12
n/a/2.8
RC8S018C
22,067
n/a
n/a
n/a
13.6
16.8
23
7.2
9
13
6.2
9
12
n/a/2.9
RC8S022C
33,668
n/a
n/a
n/a
20.4
23.6
30
10.8
13
17
9.4
12
15
n/a/4.2
RC8S026C
32,522
n/a
n/a
n/a
20.4
23.6
30
10.8
13
17
9.4
12
15
n/a/4.4
RC85030C
44,897
n/a
n/a
n/a
27.2
30.4
37
14.4
16
20
12.5
15
18
n/a/5.6
RC8S035C
43,370
n/a
n/a
n/a
27.2
30.4
37
14.4
16
20
12.5
15
18
n/a/5.8
RC8O022C
46,101
n/a
n/a
n/a
27.2
30.4
37
14.4
16
20
6.2
9
12
n/a/5.5
RC8D029C
44,319
n/a
n/a
n/a
27.2
30.4
37
14.4
16
20
6.2
9
12
n/a/5.7
RC8D035C
42,714
n/a
n/a
n/a
27.2
30.4
37
14.4
16
20
6.2
9
12
n/a/5.9
RCUS005C
6,591
n/a
n/a
n/a
2.1
4
6
1.2
2
3
0.8
2
3
n/a/0.4
RCUS006C
6,253
n/a
n/a
n/a
2.1
4
6
1.2
2
3
0.8
2
3
n/a/0.4
RCUS00SC
13,748
n/a
n/a
n/a
4.2
6.1
9
2.4
4
5
1.6
3
4
nla I 0.8
RCUS010C
12,899
n/a
n/a
n/a
4.2
6.1
9
2.4
4
5
1.6
3
4
n/a/0.8
RCUS012C
12,167
n/a
n/a
n/a
4.2
6.1
9
2.4
4
5
1.6
3
4
n/a/0.8
RCUS016C
19,252
n/a
n/a
n/a
6.3
8.2
11
3.6
5
6
2.4
4
5
n/a/1.2
RCUS018C
18,094
n/a
n/a
n/a
6.3
8.2
11
3.6
5
6
2.4
4
5
n/a/1.2
RCUS021C
25,669
n/a
n/a
n/a
8.4
10.3
13
4.8
6
7
3.2
5
6
n/a/1.6
RCUS023C
24,125
n/a
n/a
n/a
8.4
10.3
13
4.8
6
7
3.2
5
6
n/a/1.6
RCUS027C
29,538
n/a
n/a
n/a
10.5
12.4
15
6.0
7
8
4.0
6
7
n/a/2.0
RCUS030C
27,310
n/a
n/a
n/a
10.5
12.4
15
6.0
7
8
4.0
6
7
n/a/2.0
RCUS036C
32,771
n/a
n/a
n/a
12.6
14.5
17
7.2
8
9
4.8
6
7
n/a/2.4
RCUD015C
27,030
n/a
n/a
n/a
8.4
10.3
13
4.8
6
7
1.6
3
4
n/a/1.5
RCUD020C
34,888
n/a
n/a
n/a
8.4
10.3
13
4.8
6
7
1.6
3
4
n/a/1.6
RCUD031C
37,818
n/a
n/a
n/a
12.6
14.5
17
7.2
8
9
2.4
4
5
nla/2.3
RCUD036C
35,339
n/a
n/a
n/a
12.6
14.5
17
7.2
8
9
2.4
4
5
n/a/2.4
DUAL
STANDARD
SINGLE
QUIET
DUAL
QUIET
'"Standard control panels are rated at 10 kA SCCR when power is supplied with class J fuses.
•• MOPD • Maximum Overcurren1 Protection Device
• ERFORMANCE, SPECIFICATIONS ANO DIMENSIONS TABLE
'' I-
1
l•
, ,
• 'ti-'
•�
'
l
l •
�
� '
'
l
L
,.
L. -
.
•
,..,
•.
�
'
'
-·,
-A
B
C
llt'SI
SINGLE
STANDARD
1•·
i
'."'I..,
RC5S008C
0.9
1/2
1/2
1/2
1/2
1X1
54.5
28.0
199
49.5
RC5S013C
1.6
5/8
1/2
5/8
1/2
1
X
1
54.5
28.0
208
48.8
RC5S018C
2
5/8
1/2
5/8
1/2
1
X
1
54.5
28.0
215
48
RC5S024C
3
3/4
5/8
3/4
1/2
1
X
1
54.5
28.0
236
60.5
RC5S032C
3.8
7/8
3/4
7/8
1/2
1
X
1
54.5
28.0
243
60
RC5S039C
4.4
7/8
3/4
7/8
1/2
1
X
1
54.5
28.0
253
59.5
X
RC5S051C
6.5
7/8
3/4
7/8
1/2
1
2
90.5
64.0
315
62
RC5S063C
7.4
1-1/8
3/4
1-1/8
1/2
1x2
90.5
64.0
329
61.5
RC5S067C
7.9
1-1/8
7/8
1-1/8
1/2
1X2
94.5
68.0
369
63
RC5S079C
9.1
1-1/8
7/8
1-1/8
1/2
1
X
2
94.5
68.0
390
62.5
RC5S099C
11.5
1-1/8
718
1-1/8
1/2
1
X
3
126.5
100.0
480
65
RC5S113C
13.2
1-3/8
1-1/8
1-3/8
1/2
1
X
3
126.5
100.0
509
64.5
RC8S007C
8.1
1-1/8
7/8
1-1/8
5/8
1
X
1
80.9
48.1
529
62.5
RC8S009C
9.3
1-1/8
7/8
1-1/8
3/4
1
X
1
80.9
48.1
551
62.5
RC8S011C
12
1-3/8
1-1/8
1-3/8
3/4
1
X
2
138.9
106.2
710
65.5
X
829
65.5
RC8S015C
15.6
1-3/8
1-1/8
1-3/8
7/8
1
2
138.9
106.2
RC8S018C
18
1-5/8
1-1/8
1-3/8
718
1x2
138.9
106.2
869
65.5
RC8S022C
24.7
1-5/8
1-3/8
1-5/8
1-1/8
1
X
3
196.9
111.1
53.1
1186
67.3
RC8S026C
28.2
1-5/8
1-3/8
1-5/8
1-1/8
1
X
3
196.9
111.1
53.1
1246
67.3
RC8S030C
33.5
1-5/8
1-3/8
1-5/8
1-1/8
1x4
254.9
111.1
111.1
1497
68.5
RC8S035C
37.7
1-5/8
1-3/8
1-5/8
1-1/8
1x4
254.9
111.1
111.1
1574
68.5
DUAL
STANDARD
RC8D022C
23.2
1-5/8
1-3/8
1-5/8
1-1/8
2x2
138.9
106.2
1301
68.5
RC80029C
30.2
1-5/8
1-3/8
1-5/8
1-1/8
2x2
138.9
106.2
1537
68.5
RC80035C
34.8
1-5/8
1-3/8
1-5/8
1-1/8
2x2
138.9
106.2
1614
68.5
RCUS005C
5.6
7/8
3/4
7/8
5/8
1
X
1
80.9
48.1
529
43.5
RCUS006C
6.1
7/8
3/4
1-1/8
5/8
1
X
1
80.9
48.1
551
43.5
RCUS008C
8.8
1-1/8
7/8
1-1/8
3/4
1
X
2
138.9
106.2
710
46.5
RCUS010C
10.7
1-1/8
7/8
1-1/8
3/4
1
X
2
138.9
106.2
829
46.5
RCUS012C
11.6
1-3/8
1-1/8
1-3/8
3/4
1x2
138.9
106.2
869
46.5
RCUS016C
16.9
1-3/8
1-1/8
1-3/8
7/8
1
196.9
111.1
53.1
1186
48.3
48.3
SINGLE
Q UIET
X
3
RCUS018C
18
1-5/8
1-1/8
1-3/8
7/8
1x3
196.9
111.1
53.1
1246
RCUS021C
22.9
1-5/8
1-1/8
1-5/8
1-1/8
1x4
254.9
111.1
111.1
1497
49.5
RCUS023C
24.1
1-5/8
1-3/8
1-5/8
1-1/8
1x4
254.9
111.1
111.1
1574
49.5
RCUS027C
28.1
1-5/8
1-3/8
1-5/8
1-1/8
2
5
312.9
111.1
169.1
1658
50.5
RCUS030C
28.7
1-5/8
1-3/8
1-5/8
1-1/8
2x5
312.9
111.1
169.1
1746
50.5
RCUS036C
34.7
1-5/8
1-3/8
1-5/8
1-1/8
2x6
370.9
111.1
116.0
2068
51.3
49.5
X
111.1
DUAL
QUIET
RCUD015C
16.9
1-3/8
1-1/8
1-3/8
7/8
2x2
138.9
106.2
1301
RCUD020C
20.6
1-5/8
1-1/8
1-5/8
7/8
2x2
138.9
106.2
1537
49.5
RCUD031C
32.7
1-5/8
1-3/8
1-5/8
1-1/8
2x3
196.9
111.1
53.1
2086
51.3
RCUD036C
34.7
1-5/8
1-3/8
1-5/8
1-1/8
2x3
196.9
111.1
53.1
2196
51.3
* Listed OBA values are sound ratings for the maximum number of fans in operation per RC at 3m in accordance with AHRI standar d 370-2001.
** Line sizes are based on SO ft. line set/ max. 10 ft. elevation difference at 35°F 6T. Line connections may vary wrth different application ratings so consult the /
1 0 manual.
IMENSIONAL DATA RCS ANO RCU SERIES
Fri
� I·
K
1 7 2• I
7 -
LA
1 X 1 Models
·I
Single Wide End View
I
A
�
l
-1-
il===-r::::::,_�_.:::=::::;.-�--==---'J -=r
D :�:::..
B
Y .I
-.u;
I,
,...........
__,
_
_._
__
-.....__
-------.I
.
�
K
17.72"
0
Double Wide End View
r
d o ls
4Mo
'--•---- A _____L___e_____
-
r,
= = = =
K=I 6 1 6
�-
n
91.86"
= = � = r---"Lli""""
,......._
�
--- ----'- ■ , --B
'-r-r A
•
L
177'"•
1!•
Electrical Enclosure
1 X 5 and
2 X 5 Models
Piping Connections
A
B
__..,•"-•--....a.._
1-+ -----'..:__
0
l
•l
L
yj
�n1 6,od
--•-1 •--G___
X
X
, O•-
.1
24.0" (S1d.J
I IMENSIONAL DATA RCS SERIES
Model
I
Fan
Layoul
I
'
RCS
Overall
I Lenglh ill
1inches1
54.5
----- -
1X 1
.-
-- ·--
28.3
RC5S024
1X1
54.5
37.3
RC5S008
�vv,v
RC5S018
RC5S032
RC5S039
1X1
1X1
1X1
RC5S063
1X2
1X2
RC5S079
1X2
RC5S051
RC5S067
RC5S099
RC5S113
1X2
1X3
1X3
--·28.3
54.5
54.5
54.5
37.3
37.3
90.5
28.3
90.5
Mou•ling 01mens1□ns 1ml
Oveiall
WrdlhiW)
1rnches1
n� n
28.0
35.2
64.0
35.2
26.2
26.2
28.0
26.2
28.0
28.0
64.0
68.0
126.5
37.3
37.3
100.0
37.3
B
-- -
37.3
126.5
'
I
28.0
94.5
94.5
28.3
'
A
I
I
35.2
26.2
35.2
68.0
35.2
35.2
100.0
35.2
1 X 1 Models
9.25"
9.25·
9.25"
-1. •·-• --� __o; .I
�
1 X 2 Models
�
A
L
Electrical Enclosure
.I
1 X 3 Models
N120 W18485 Freistadt Road
Germantown, WI 53022
�
011111
/AIDI
PH: (262) 946·7400
FAX: (262) 946·7401
www.desert-aire.com
E-mail: info@desert-aire.com
226 2016/07
4.5
4
_3.5
O'l
i::::::
:.::.
3
5
� 2
c..
!,,)
2
(J'j
·1.s
·.::;
1
05
------.-=---------------------------......
o .......
0
500
1000
'1500
2000
2500
3000
Volume Flow Rate (cfm)
3500
4000
....------1
5000
4500
ElEClRfC t£AT
HOT WAlER COIL
(C()..A)W.)
CO-A>QAL)
w/2EA H,o
w/2E.AHi()COOl.£0
COJrl)ENSERS
COOLED CONJENSERS
C
THIS MATRIX Will PROVIDE THE CABINET SIZE WHEN SE1£CTING OPTIONS FOR YOUR UNIT.
�A��ft
�- •L,�ft
RIA
CCANET
•
""'"'
""'""
A
""'25
C
16><20
D
E
DESERT ARE PART NUMBER
AlOR, r
871>-019
tm-002
870-112
tf12-003
872-005
870-080
Fl.lER SIZE QTY 4"'FLlER
1
2
4
4
870-079
tm-002
'-'<BClXFL
LCC.ABNET Ftl...TER SIZE QTY
A
B
C
D
E
E CABINET LAYOUl
181»
LEGEND
....
�
3
S70001
070-050
_,._....,._orDeNrt.-.n•�
AU. DaENSIONS ARE IN INCHES
TOLEftANCE ! ,rrr
M
870001
ai.e.t,..�.Nf/ .... ...,.,....
p::;;u;:::p��::1������§��������[!§:::�:;�[;j;{;�p:j���:..,.;;m��
----· NOCA1ESOPTXJNALC()Mf'()NEN1'S
1&1&l1
OUIOOOR
1 FILTER
(AL
IJMU!Ml
2
n.---.arm ........_. ___
........... ..-...e�oftl9
M
D
11
""""'
�
r FILTER
<PAPER)
--
Ma.--1J1on:t.s
AIIAlfl!BSIO"
AII... __.0,125"1911:
......
�-
0,.-,__ u..
X)(
XXX
JO(XX.
t125
10Ml
!030
-
N1l:lWl3485FTelslodlRO.
� �own. WI 53022
Ph: l2h2)1.U-7,400
Fax: (262) 946,.74)1
..l'IDIE
EXPFRTAIRE CABINET MATRIX
EXPERTAIRE G.A. PAGE {l)
NIA
NTS
14
EXPERTAIRf GA
v
l
j'
<.�i�J
EXPERTAIRE GA
.,.
REFRIGERATION
I@
\
..
\
ELECTOCAL
l�f.J
-=ii
0
u
.o_
000
"ji-'--'-----c r
COILS
c::::JI
FLTERS
IJIS10E
ALO
AIOPTION
R CONFIGURATK)N
REF�g��
W;'t"
0
.o_
'------'
�
0 -:
.<-0
0
�c�
1--- OVERAU.WOTH -
(I) WEIGHTS SHOWN REFLECT FUUY OPflONEO ESIMATEO UNIT WEIGHT
�
CAB 8: LC01
CAB A: LC01
�B:LC02
CAB B: LC03
CAB8: L C04
CAB B: LC05
CABC: LC04
CABC: LCOS
CABC: LCOB
CABC: LCOO
CAB D: LCOO
CAB D: LC06
CAB D: LC10
CAB D:LC12
CABE:LC15
•
2
3
•
5
•
OVERAU. OVERALL CABWET --• CA8IET
WIJTH
LENGTH HEIGHT WIDTH
l.ENG1H
.....
,,,,,.
48 1/4
50 114
56 118
.. 1,.
n114
77
118
D
3113111
'63/lS
"2 718
.. 1,.
59 1/4
.. 118
53 ,,.
.
""' ""
-
111314
...
II
11211
WU,
112
.,. �
10112
1112
,0112 15 1111
,..
•
• 118
13 718
8314
tOll2
12518 7118
1
173'4
.
I
,
I 112 19 3'4
"7118
...
11/4
....
3 1/S �1/8
�10
,,
112
•
22""
15 710
10 112
6 112
"
D
"""f"ii2
473111
,. 7111
rtEFRf.cC.RATION HOr GAS
REFRGERATlON U'.lUI> (IUBE
HOTWA11;R N.ET
(QJl\JBEO.O.)
HOTWA.lER .....,,...:.,
ta,lUBEO.D.)
PCXll.SPAoun.ET
SQf 00 CPVC PPE (IPS)
POOL SPA INLET
SCH 80 CPYC PPE (1PS)
-
C
""
I
1
3 112
91r.l 391/2
�1,
1118
""
.
H
..,
-
K
2311
3 7"'
• 7/1
• 3/lS
t--+----1
5 3'8
,•----�
•=
I.CO2
""'
.,,,.
1£05
1112
2.,.
laJII
LCIO
LC12
LC15
M
3114
•
3112
4 718
-...
.,.
n;;;;;(l;
toOJ
12311
t>ll
""'
""'
1,00
3
3112
�
_!..!!_
.3 112
5 114
5 3/lS
31/2
..,.
.,..
p
N
101/2
127/8
15118
31/2 >-177/8
3318
21318
.JJ>
. /fa
-� 000
_J_ 0
o
T
•J _1 f--Cr r®
f---©
I ""
t
l
{)--,
T A_;_CABIN�S
___ - .... -@- ElIi� --- - -,. -
Thlldl--.anr:l�cunlamd
MDIIMMID!attlfdlM
henlinafabexdultlepA)pertyofh
AINtfl/l490"
DNlr:IAnCorprnlon. AnftaeCMlmllnlal Moabldl,�0.125"flllt
tolheWelNtsdDeeertAnispvhllllld.
ALL D1rENS10NS ARE IN lNCHES
TOlERANCE :t 118"
----'"",,,.
00.,.--
D.E CABINETS
..__
Jhi-dAr,glef'rojedon
NIA
xx
XXX
xxxx
-CLB
.,.
,
21•
NIS
N1>JW18'8Sfnri>lodtRD.
GecmcrltOIM'l,Wls.m2
� Ph:(262)94',-7«x)
fax: (262} 94<>-7<01
EXPERTAIRE LAYOUT
EXPERTARE G.A. PAGE (2)
EXPERTAIRE GA
I
EXPERT AIRE GA
I
HORIZONTAL OISCHARGE
�
"
t - ·l
J
-1
-
Cl
□
�
.
A2'
--j
h.
I
i
-
I
CABA: LC01
CABA:LC02
CABA: LC03
CABB:LC01
CABB: LC02
CABB:u:03
CABB: LC04
CABB:LC05
L-lllnC:LC04
CABC: LC05
CABC: Leo&
CABC: LC08
CABO: I.COS
CABu: LC08
CASO: LC10
CASO: LC12
CABE: LC15
I
C1
D1
12 314
8 112
13 318
13 314
14
15 7/8
1 114
16 1/8
>---- 12 1/2
19 1/8
I
�
1
:
�
81
0
I
16 318
18 7/8
�---=��
�ITSIZE
JII.HA" LC01
CAB"-LCQ2
CABA: t<;C)J
CABB. lcm
CABB. LC02 'CAB B. LCXJ3
CABS: Lv04
CAB B. lC05
CAB C lC04
CABC.LC05
CABC: lC06
CABC:LC08
CAB D: LC06
CAB D: LCOI
CABD· LC10
CAB 0: LC12
CABE: LC15
"2
1 518
)
I
INlAKE
END
C2
13
8 1/2
14 118
14 118
"""
"
02
6 718
�
-
13114
6 718
�
�
15 31◄
�
�
,_....._
)�T3l78
4
1
�
7'il'ii"'
a..tAnCorporallon. Anfme..._.l
lo ...... otDNertAn•�
l
AJJ
-j
-
M..LDlll:NSIOMS ARE N N:HES
TOtERANCE ! 1fff'
"»-HA: LC01
CAIi)\; LC0:2
l.Ati A:l::COJ
CABB: lun.
CAB B: LC02 '
CABB: LC03
CABB:LCD4
CAB B:LC05
CAB C: LC04
CAB C: LC05
CAB C: LC06
CAB C: LC08
CAB D: LC06
CAB 0: LC08
CAB 0: LC10
CAB 0: LC12
CAB E: LC15
,....__.0.1Z5"....
u.-��
NIA
'--�
-o,-
' lNTSllE
M0.-......,11'1:MS
M,...,,_81:>.
--
CJ
ENO
DIMENSIONS TO OUTSIDE OF FLANGE
@- -El--- Jtwd
Angle J\tjection
NOlfS:
)
f
J_
�
82
18 114
BJ
fta�Md�_..._.
hlll'ein-lhee:ii:duliiYepR:lpeltyol' ....
FILTER RACJ: HAS BEEN
REMOVED FOR CLARilY
I
�OPDISCHA�E
e-- e-
p
DI
A1
-DISCHARGE
027
C2
B2
DIMENSJONS TO OUTSIDE Of FLANGE
LNTSIIE
'
I -r
'
T�I'-- i"l
l_�
. -�". . )
. - . "'
"'
�OM DISCHARGE
lut"'DISCHA.�
B3
A3
�
1 518
-xx
XXX
XXlOI
-
-CL8
,,,,
,..,
,roo
,,.
NTS
13 1/2
13 7/8
14
16
16 1/2
�
�
1
�
19174
----
�
Ii�
1-,.
3/4
8 112
16 114
T--U..
03
CJ
12 7/8
Nl:>lW18<85�..lod!RO
53)22
���
fa,c /262) 946-74'.ll
OlSCHARGE OPJIONS
EXPERIAIREG.A. PAGE (3)
EXPERTAIRE.GA
I
EXPERTAIRE GA
VlfWS SHOWN DEPK:T
OUTSIDE AIR
OPTIONS �[T & T
----- - --
I
1
A<------------< a,
----'
-
�J
�
-
[g:J
1---
Of'TIONAL
DAMPER
(OPTION "F')
__L
4
-53/ "
�
�
l
oo··
c_ hI-
_j_______= I
,-T
C
000 c::=0
.Q:)
0
NOTE:
I,
CABA�r.oo
6 1/4
�=��:
CAB B: LCOS
CAB C: LC04
CAB C: LC05
48 718
CAB 0: LC06
CABD: LC08
CAB D: LC10
CABA: L
CABA· LCIJ2
CAB A LC03
CABB LC01
CAB8: I.CO2
CABB·L<:m
CAB B· LC04
CAB B. LCC6
CABC: LC04
CA.BC: l.CC6
CABC: LC06
CABC LCOB
CABO: LC06
CAB 0: LCOB
CAB O· LC10
CAB O- LC12
CABE LC15
IZE
'f
t
21 7/8
•·
"'-.
,______
"-- 12 314
I"-.
7 7/8
B5
--------�
19 718 f--42 ,,.
43 314
cs
15 3"I
19:W
:�/8
"-.
'-4 5/8
05
0
F5
G5
H5
15
Jo
3111
�
I�--, .,_
32518
r
,
E5
I
El
ES
11 31•
s 7/8
51 314
AS
l
1---
718
__I
0
DI
C4
�:: �� rI Z"'CAB A: LC83
CA88: LC01"CAB 8: LC02
�
VIEWS SHOWN DEPK:T
OUTSIDE AIR
OPTIONS 'T'&''\J'
OUl�IUtAR
A4
"- CAB
CAR-A. LC01
_ •
Bl·
.o_
•. -=---=-
OUTSIDE AJR OPTION �N"
(NOT SHOWN)
IS FOR NO OUTSIDE AIR
L______ 04 ________J C4
I
i-
rZ::
I 7/0
---..........
I 5Al
JO ,,.
5 J/4
�
613'16
33 718
DIii�--��
heNinaRhftcul¥er,n:,pMy"ofl'II'
DeeertAnc«po,11lort Anf-damB'at
lothe�oftlaettAft•�
All DIMENSIONS ARE .. INCHES
TOt.ERANCf .t 1M'
---__
A.t�ln�
M/qllls,90"
MOiladli_..0.1�flllt
._._
NIA
XXX
tOllO
X)O(X tm«l
Alves 11·
t125
xx
NTS
4/4
NIDW16485 Freisladf RO
Germantown. WI 53022
Ph:{262j9"'6-7-41Xl
fax: {262) 9-46--7401
OUTSIDE AIR OPTIONS
EXPERT AIRE GA PAGE (4)
EXPERTAIRE GA
105
106
107
108
1 09
110
111
HTR1O6
t]
L2
L3
L1
L2
.__,,.--=�-----
--�-----
112
.A.J�--.,
1
114
L3
116
141
�
115
MOT114
SUPPLY BLOWER
1MTR
COMPRESSOR OVERLOAD WIRING
FOR DRAWING LVL-1 LINE 219.
M218 1171
-
117
_AJ�
118
11 9
OPTIONAL LOW SYSTEM
VOLTAGE MONITOR
M217 1131
113
115
OPTIONAL SCR HEATER. REFER
TO HEATER OEM SCHEMATICS
FOR WIRING DETAILS.
L3
-.,
I
MOT118
181
� COMPRESSOR
2MTR
119
,,..1£'
MSP117
-,�2�05�1-----��----�2�191�
-0
13
0
120
1 21
122
123
124
COMPRESSOR
CRANKCASE HEATER
125
126
L2
1 27
128
129
130
L2
1 31
XFRMR132
132
135
136
137
138
139
WHT
W HT
1EJ31
1331
�>-c:.i:----='-'----�
�=-
133
1 34
CONTROL TRANSFORMER T1
24VAC SECONDARY
H4
L3
L1
CONTROL TRANSFORMER T2
24VAC SECONDARY FOR CONTROLLER POWER ONLY
£
XFRMR137
1371
C:::::,_'.1-_____1,.,,3'-'-72-'---�1 72
1371
_&
=r� �
��S �CONTROL COMMON
AND IS TO REMAIN UNt.ABaED .
H
c
.£. VOLTAGE
��� i� io �E � LINE
AND TRANSFORMER WIRING DIAGRAM FOR
140
141
CORRECT TRANSFORMER WIRING.
l(
142
M
i1:i. �� i"&.r���L�fuwi:JJIJlf� �w
OPENS ON A FAULT CONDmON.
143
L£G£ND
--- F.!CIORY WIRING FROM COMl'(HNl TO T. STRIP
-• - - OP1101W. OR IICJE. IIEPENllANT COMPONENTS
144
145
- - - LOW VOLTAGE FlEI.D WIRING
otJooc
otJoocT
-0-
4
ADDED LVM LAYER
3
2
REVISION FOR MSP UPDATE
INmAL RELEASE
CONTACIOR OR ',fl) IIOUNlED <MRlOAD
INTERNH. COMPRESSOR MOUN1Ell OVERI.OMl
HllCAlIS TERMINoll POINT
INDICATES CONNECTION POINT
,..
''" '"'
""
ffl)
203
'""'
...
,..
,..
,..
'"
207
..
,..
,
""
,
..,,."'.
.....
...
'"
'"
'"
2U
''"
,..
217
,,.
..
220
"'
"'
22l
,,.
,..
=
,..
227
"'
217
,,.
2211
23'
232
,,. '"'
,.,.
,,.
:w
,.,.
,.,.
ll7
ill!..)�� 12 lONS Ml) l.,WEl._________j
£ :T:&.IC�COOE. aff WIIE IS 1NE ClONNQ.. UMION _,
A����� =:r-1-� lHE COIUCf IS
Rllt DDMS
A :ro'�,�� aJNDD.. SQeMDC
=
• tC ttM.Cr,
rDUtt 11€ .uftR ..,..
a,,�
.&. �1:
A�IJIQT
��\:=-=:. ;..U:S":.t��
.-.-0: 1011aWS 20!1,t 10 2231 we 1t£ Mll0'fl: OCINDEN!IDI 5 -s,,um.
A���,=.,.���,�-...ac Nl!.IT $11;1M..
/A�����v�:"��
,:U4J IIEill,RJI ON 1U. INlS watt tUJl'l£ Fill t:#W:n CDIJOl:5[RS.
CIBJI CN.Y t11BaHD ml UNl'S EllW'PE9 ... f'00L 9llDI. <XIICIEH50IS.
,..,,
""'---=<24
+-----olf--l>--"24
--·-··-··-··-·•7
i
':i-'--o--1c<;::::.•::.•-QMMCJIE aEED S<UNaO. s sJ
11
sou
1
sou
!
._.,...__________,-JL--,.J lo-------''"'.,'-'-'---=••
•::.__.,..,,,,:=•.:.:•'--ll ���·
;;:
0£-oEAGat fO flDKJTE
:
�l_l:�����-��--------,....,
=-==_ =_ =_ =_ =_ =_ =_ =_ _=_=_==_ =_ _=�_ �_ ,SOl.2_1=_�:.:_..==-a'_:_-���T'
jk.J
�,li.:�;.;.:.;;-,;;.7
SOt.244
2441
----
�;;..,. .,,:-�7:
[g:J
I: _______________
I
··-··-··-··-··_J
""""'
-
�2COfT�7
121,122 1
. 2.JJZl
r-.....�--7
i
♦ -
j
b----------- �· --�
•
fll:f-
,f425-<Jlll.OfMOflkSSUIH..CNI)
j
•
lf425-(m
!
!
•
I
�J€1'+
lrmJS RS485
J:JN040 2123
2
�� ______ ..ar
�--{-f!.._�
HJ __;�1 H4
WARNING:C21STIECOIMlN
o----.�--0
FORNCM,NOSN«JNOI.
00 NOT NIX POWER SOURCES
WHEN USINGTHESE OIJTPJTS.
•
!
•
��-i
�NDNET+
SUGOESTED- FOR
OCCIIPED CONTROL
j
�7
PSD2ti0
'
��
-
UNllSWllll........._ El.ECT10CHl!ATj
, ltA\'EANAlltA.OWl9RQWIIIQSVIITCH ,
' INSTALLED aETWEENTie: IEATER '
MOffll COlfflN)UNCLOBURE.
::J
SUGGESTED-
FOR Al.ARM
INDICA110H OR WATER PUMP START
I
��
JlJ
CUSTOIIERCONNE� TO
Cll3530 CONtROLSYSTal
>-"22
..,,..., __.:.:2:J.J2 ------ HOT
NCl50
N060 ru1
2'1.t!.--{��-�
�N���
DO NOT Iii)(� SOURCES
WHEN USING THESE Ol/1Pt1TS.
-
�-oit!3-�
--LCGCND
""'
_J
i!!L._l
L:
j
fiuJ --
C20 :ma
I
•
_____
SUGGES'TED- FOR
SECONO AIR HEAT STAGE
--Dl:lalrll6IIO.£DUlflOIOT ....
--IIWM.lltllOE.lfJ'IXMJC!ll'OIOOS
-0- ICOB...._l'WIT
U N,'\afD ..,_ CGlf W11NG
12
.ws:m 5911MIC
11 MW�� IHJ Nl1I'£
10 ..... ,. ••• :m
4/25/,t
I/S/l4
4/22/14
4/19/14
lfiN
RW
MW
lfflr
D'NI
2.llO 1Cat1
2m