Product guide PG/POSITIONER/001-EN
Electro-pneumatic positioners
Product guide
Precision engineered high performance
positioners suitable for any industrial
control valve application that requires
accurate positioning with easy local
setup and unsurpassed low operating
cost.
Product selection
Feature selection
Select the device suited to the respective application using the
table.
Select the required configuration for the device by filling out
the fields in the form.
Save the completed form via "Save as... " in Acrobat Reader.
Send the form as an email, fax or letter to the ABB sales
department.
Electro-pneumatic positioners
Product guide
Product selection
Explosion
protection
Input /
Communication
Diagnostics
Housing
Supply
pressure
Air capacity
Position sensor
Remote version
Without
Intrinsically Safe
Flameproof /
Explosion-Proof
4 … 20 mA LCI
4 … 20 mA HART
PROFIBUS PA
FOUNDATION
fieldbus
Basic diagnostics
Advanced
diagnostics
Valve signature
Partial stroke
Aluminum
Stainless steel
Up to 6 bar (90 psi)
Up to 10 bar
(145 psi)
Up to 10 Nm3/h
(6 scfm)
Up to 40 Nm3/h
(23 scfm)
Potentiometer
Contactless sensor
HART
Communication
2 PG/POSITIONER/001-EN | Positioner product guide
TZIDC
TZIDC-200
EDP300
Feature selection
Input / Communication
TZIDC
Ordering code
V18345
V18346
V18347
4 … 20 mA LCI / HART
PROFIBUS PA
FOUNDATION fieldbus
Configuration / Options
Mechanical position
indicator
Actuator type - Output
Safe position
Connection
Explosion protection
Option module (max. 2)
Mechanical kit for digital
position feedback
(max. 1 and only with visual
position indicator)
TZIDC-200
Ordering code
V18348
V18349
V18350
EDP300
Ordering code
EDP300
-
No
Yes
Single acting
Double acting
Fail safe (move to safe position)
Fail freeze (hold last position)
Cable
Air Pipe
Thread 1/2-14 NPT
Thread 1/4-18 NPT
Thread M20 x 1.5
Thread 1/4-18 NPT
Thread M20 x 1.5
Thread G 1/2
Thread G 1/2
Thread Rc 1/4
With __________________________________________ (please see datasheet)
Analog position feedback
Digital position feedback
Emergency shutdown
Proximity switches SJ2-SN (NC or logical 1)
Proximity switches SJ2-S1N (NO or logical 0)
24 V AC / DC microswitches (change-over contacts) – only general purpose
EDP300 Additional configuration opportunities
Housing material
Stainless steel
Position sensor type
Integrated contactless sensor
Diagnostic module
Pressure sensors
Special applications
Operation with natural gas
Mounting options
Mounting bracket
Replacement / Upgrade positioner
Replacement positioner
Linear standard according to NAMUR DIN / IEC 534
Rotary standard according to NAMUR DIN VDI / VDE 3845
Special mounting solution for valve type:
__________________________________________________________________
ABB-Positioner, type:
__________________________________________________________________
Other positioner, with model ordering code:
__________________________________________________________________
Reset Form
Positioner product guide | PG/POSITIONER/001-EN
3
ABB Inc.
Process Automation
125 E. County Line Road
Warminster, PA 18974
USA
Tel:
+1 215 674 6000
Fax:
+1 215 674 7183
ABB Automation Products GmbH
Process Automation
Schillerstr. 72
32425 Minden
Germany
Tel:
+49 571 830-0
Fax:
+49 571 830-1806
Note
We reserve the right to make technical changes or
modify the contents of this document without prior
notice. With regard to purchase orders, the agreed
particulars shall prevail. ABB does not accept any
responsibility whatsoever for potential errors or
possible lack of information in this document.
We reserve all rights in this document and in the
subject matter and illustrations contained therein.
Any reproduction, disclosure to third parties or
utilization of its contents - in whole or in parts – is
forbidden without prior written consent of ABB.
Copyright© 2014 ABB
All rights reserved
3KXE341302R2901
www.abb.com/positioners
More information
PG/POSITIONER/001-EN 04.2014
Contact us
