How with the TIA Portal do you transfer your project to your operator panel via USB

advertisement
6/4/2018
How with the TIA Portal do you transfer your project to your operator panel via a... - ID: 109740696 - Industry Suppo…
How with the TIA Portal do you transfer your project to your operator panel via a
storage medium (USB stick, for example)?
Entry
Associated product(s)
With TIA Portal V14 and higher, in addition to the previous transfer options (Ethernet, for example), you can download your project directly to
a storage medium (USB stick, SD card). Here the data can be handled via the Windows Explorer so that you can also send it by e-mail, for
example.
General
Download project to storage medium
Transfer the project to Comfort / Mobile Panel
Transfer project to Basic Panel
Transfer project to PC
General
The following files are transferred with the download:
Project
Operating system image
User and recipe data
The following devices support the download from device version V14.0 onwards:
Basic Panel 2nd Generation
Mobile Panel 2nd Generation
Comfort Panel
WinCC Runtime Advanced
Download project to storage medium
1. Connect your storage medium (USB stick, for example) to your Engineering PC.
2. In the project navigation in the TIA Portal you open the folder "Card Reader/USB Memory > Removable devices".
Via the "Add user-defined Card Reader button" you can select a storage path (a folder enabled on the Runtime PC, for example) as target directory.
https://support.industry.siemens.com/cs/document/109740696/how-with-the-tia-portal-do-you-transfer-your-project-to-your-operator-panel-via-a-storage-medium-(usb-stic
Fig. 01
3. Drag and drop the operator panel to the storage medium.
6/4/2018
How with the TIA Portal do you transfer your project to your operator panel via a... - ID: 109740696 - Industry Suppo…
Fig. 02
4. Choose whether you want the user data and recipe data overwritten on the operator panel and whether this setting is to be locked on the operator
panel. Click the "Load" button.
Fig. 03
Note: Click the operator panel in the "Devices & Networks" editor. Under PROFINET Interface > Ethernet addresses you select whether the IP
address and the PROFINET device name from the project or from the device are to be used. You cannot change this setting.
A "Simatic.HMI" folder is created on the storage medium. The data is stored in this folder.
https://support.industry.siemens.com/cs/document/109740696/how-with-the-tia-portal-do-you-transfer-your-project-to-your-operator-panel-via-a-storage-medium-(usb-stic
Transfer the project to Comfort / Mobile Panel
1. Connect the storage medium to the operator panel.
2. Open the Control Panel of the operator panel via "Settings".
6/4/2018
How with the TIA Portal do you transfer your project to your operator panel via a... - ID: 109740696 - Industry Suppo…
Fig. 04
3. Double-click "Service & Commissioning".
Fig. 05
4. Select the "Load Project" tab and click "Next".
Fig. 06
5. Select the storage medium and click "Next".
https://support.industry.siemens.com/cs/document/109740696/how-with-the-tia-portal-do-you-transfer-your-project-to-your-operator-panel-via-a-storage-medium-(usb-stic
Fig. 07
6/4/2018
How with the TIA Portal do you transfer your project to your operator panel via a... - ID: 109740696 - Industry Suppo…
6. Select the project to be transferred and click "Next".
Fig. 08
7. As required you set whether the user data and recipe data is to be overwritten and whether the operator panel image is to be transferred.
Start the download via "Load".
Fig. 09
Transfer project to Basic Panel
1. Connect the storage medium with the operator panel.
2. Open the Control Panel of the operator panel via "Settings".
https://support.industry.siemens.com/cs/document/109740696/how-with-the-tia-portal-do-you-transfer-your-project-to-your-operator-panel-via-a-storage-medium-(usb-stic
6/4/2018
How with the TIA Portal do you transfer your project to your operator panel via a... - ID: 109740696 - Industry Suppo…
Fig. 10
3. Click "Service & Commissioning".
Fig. 11
4. Click "Project Download".
Fig. 12
5. Select the storage medium and click the arrow.
https://support.industry.siemens.com/cs/document/109740696/how-with-the-tia-portal-do-you-transfer-your-project-to-your-operator-panel-via-a-storage-medium-(usb-stic
6/4/2018
How with the TIA Portal do you transfer your project to your operator panel via a... - ID: 109740696 - Industry Suppo…
Fig. 13
6. Select the project and click the arrow.
https://support.industry.siemens.com/cs/document/109740696/how-with-the-tia-portal-do-you-transfer-your-project-to-your-operator-panel-via-a-storage-medium-(usb-stic
Fig. 14
7. As required you set whether you want the user data and recipe data overwritten on the operator panel and whether the operator panel image is to be
transferred. Click the arrow.
6/4/2018
How with the TIA Portal do you transfer your project to your operator panel via a... - ID: 109740696 - Industry Suppo…
Fig. 15
8. Check the settings and start the download with "Accept".
https://support.industry.siemens.com/cs/document/109740696/how-with-the-tia-portal-do-you-transfer-your-project-to-your-operator-panel-via-a-storage-medium-(usb-stic
Fig. 16
Transfer project to PC
1. Connect the storage medium with the Runtime PC
2. Copy the files to the folder "Simatic.HMI > RT_Projects > Project_name.PCName"
6/4/2018
How with the TIA Portal do you transfer your project to your operator panel via a... - ID: 109740696 - Industry Suppo…
Fig. 17
3. Open the WinCC Runtime Loader via "Start > All Programs > Siemens Automation > Runtime Systems > WinCC Runtime Advanced > WinCC
Runtime Loader".
Click the "Settings" button.
Fig. 18
4. Open or create the path under "Configuration path" in the Windows Explorer.
You can also change the path as you wish.
https://support.industry.siemens.com/cs/document/109740696/how-with-the-tia-portal-do-you-transfer-your-project-to-your-operator-panel-via-a-storage-medium-(usb-stic
Fig. 19
5. Insert the copied files into that folder.
Download
Related flashcards
Create Flashcards