Stairs Incident Free Means everyone returning home safely, every day Contents • • • • • • Construction Stair Nosing & Leading Edge Stair Guard Riser & Tread Dimensions Stair Inclination Overhead Clearance AGB-CVX-GN-SPC-FS-1160: HFE Requirements for Ramps, Stairs, Vertical Ladders, Work Platforms, Walkways & Railings SID Section 3 – Stairways, Ramps, Stiles, Walkways & Platforms Consistent Riser, Tread & Stair Angle 240 – 275 mm (9.5 – 10.8”) RUN 178 – 200 mm (7 – 8”) 25 mm (1”) Nosing 38.7 degrees Square, Level & Overlap Square, Level & Overlap Tread Marking & Slip Resistance • Tread Color Marking – Leading edge visually distinctive from tread color – Leading edge bright red if treads & deck grating is yellow – Leading edge bright yellow if treads & deck grating is galvanized steel or painted gray • Slip Resistance – Leading edge covered with slip-resistant material Leading Edge / Nosing Leading Edge / Nosing Leading Edge / Nosing Leading Edge / Nosing Leading Edge / Nosing Tread & Platform Marking Tripping Hazard Tripping Hazard Headroom 2150 mm (7’-0”) Minimum Overhead Clearance Stair Guard Stair Guard Stair Guard Single-Step Riser Questions?