Constant Voltage 12V
Signage drivers
12V / 60W PS - UL/CE 120/240/277 V
INPUT
GEPS12-60U-GL
Product information
GE Tetra 12V Constant Voltage LED drivers are
specifically designed and recommended for use with
the GE Tetra Signage range of Channel Letter products
Constant Voltage 12V Signage drivers
12V / 60W PS - UL/CE 120/240/277 V INPUT
GEPS12-60U-GL
Product data
Product Code
GEPS12-60U-GL
VDE EMC
CISPR15
CE
Yes
UL
Yes
FCC Class
A
ENEC
No
SELV
Yes
Product colour
White
Storage Temperature [°C]
-40 to +85
Dimmable
No
Secondary protection
Yes
Height [mm]
30
Length [mm]
240
Width [mm]
43
Input voltage surge protection
Yes
IP
IP66: separate enclosure required
Weight [g]
599
Over temperature protection
Yes
IP67
No
Mounting hole spacing, length (mm)
228.6
Mounting hole spacing, width (mm)
26.6
Casing
Metal
Power loss @ full load:
9W max
PSU efficiency: (Remark)
>0.86
Maximum casing temperature in case of fault:
85°C
Short circuit protection:
Automatic,reversible
Overload protection:
Automatic,reversible
Over temperature protection:
Automatic,reversible
Cable cross section input side:
18AWG
Cable cross section output side:
18AWG
Wire preparation length, input side:
10mm
Constant Voltage 12V Signage drivers
12V / 60W PS - UL/CE 120/240/277 V INPUT
GEPS12-60U-GL
Wire preparation length, output side:
10mm
Max. cable length-system:
Refer to LE installation
PSU outdoor protection against humidity:
potted construction, dry and damp locations
Safety:
IEC61347-1,IEC61347-2-13,UL8750,UL1310
Galvanic insulation primary/secondary: (Remark)
3750Vrms Build-in SELV
Performance data
Colour (product colour)
White
Ambient temperature min. [°C]
-40°C
Ambient temperature max. [°C]
60°C
Case temperature [°C]
85°C
Power factor
>0.9
PSU life time: (Remark)
5 years
Cable types, input side: ( Remark)
Flexible, ~440mm , Color coding L : Brown N : Blue
Cable types, output side: ( Remark)
Flexible, ~440mm, Color coding LEDModule(+) : Red
LEDModule (-) : Black
Performance:
IEC 60529 (IP rating), ANSI/IEEE C62.41 – 2005,
EN61000-4-5:2006
Radio interference:
FCC CFR 47 Part 15, CISPR 15
Harmonic content:
IEC 61000-3-2
Vibration tested:
Yes
Constant Voltage 12V Signage drivers
12V / 60W PS - UL/CE 120/240/277 V INPUT
GEPS12-60U-GL
Electrical data
Input current
650 mA
Input frequency
50/60
Output voltage
12V
Output voltage range
11V to 13V
Input voltage range
108-305V
Nominal power [W]
60
Nominal lamp voltage [V]
230
Power loss in no load condition:
7W
Inrush current: (Remark)
:27A/0.23ms@120V;54A/0.24ms@230V;59A/0.25ms@2
77V
No-load proof:
Yes
Surge capability:
L-N, L-G,N-G, L+N-G:3kV
Logistic data
Pack Quantity
10
Product status
Available
Disclaimer
This product is intended to be used as a lamp control gear that is installed after the mains control switch.
GE and General Electric are both registered trademarks
of the General Electric Company
GE Lighting is constantly developing and improving its products. For this reason, all product descriptions in this brochure are intended as a
general guide, and we may change specifications from time to time in the interest of product development, without prior notification or
public announcement. All descriptions in this publication present only general particulars of the goods to which they refer and shall not form
part of any contract. Data in this guide has been obtained in controlled experimental conditions. However, GE Lighting cannot accept any
liability arising from the reliance on such data to the extent permitted.