rear crakshaft R1150gs 2

advertisement
11 11 023/025
Installing radial shaft seals on crankshaft
11 5 702
11 5 703
11 5 703
11 5 703
11 5 702
11 5 703
11 5 703
11 5 701
00 5 500
11 5 662
11 5 661
11 5 662
00 5 500
11 5 661
11 5 661
00 5 500
11.51
Installing the crankshaft-end radial shaft seal
• Shape the lip of the radial shaft seal carefully by
hand (1).
• Oil the radial shaft seal at the sealing/contact
surface.
• Using assembly sleeve, BMW No. 11 5 702,
mount the radial shaft seal with the closed side
toward the clutch onto sleeve,
BMW No. 11 5 703, (2).
• Remove assembly sleeve (3).
• Mount sleeve complete with radial shaft seal on
crankshaft (4).
• Use drift, BMW No. 11 5 701, together with the
sleeve (5) to drive the radial shaft seal onto the
crankshaft.
• Remove sleeve (6).
Installing the clutch-end radial shaft seal
Shape the lip of the radial shaft seal carefully by
hand (7).
• Oil the radial shaft seal at the sealing/contact
surface.
• Push on radial oil seal with the closed side toward the clutch by sliding over sleeve
BMW No. 11 5 662, on drift punch
BMW No. 11 5 661 with clamp
BMW No. 00 5 500 (8).
• Remove assembly sleeve (9).
• Using the drift, drive the radial shaft seal
home (10).
•
11.52
Download
Related flashcards
Create Flashcards