Cisco 200-125 CCNA Cisco Certified Network Associate CCNA (v3.0) Web: www.exact2pass.com Version: Demo Email: [email protected] [ Total Questions: 10] IMPORTANT NOTICE Feedback We have developed quality product and state-of-art service to ensure our customers interest. If you have any suggestions, please feel free to contact us at [email protected] Support If you have any questions about our product, please provide the following items: exam code screenshot of the question login id/email please contact us at [email protected] and our technical experts will provide support within 24 hours. Copyright The product of each order has its own encryption code, so you should use it independently. Any unauthorized changes will inflict legal punishment. We reserve the right of final explanation for this statement. Exact Questions Cisco - 200-125 Exam Topic Breakdown Exam Topic Number of Questions Topic 4 : New Pool Exam D 2 Topic 3 : New Pool Exam C 2 Topic 5 : New Pool E (Latest) 2 Topic 2 : New Pool Exam B 2 Topic 1 : New Pool Exam A 2 TOTAL 10 Only exact questions will Pass You in Exam 1 of 11 Exact Questions Cisco - 200-125 Topic 4, New Pool Exam D Question #:1 - (Exam Topic 4) Refer to the exhibit. Given the output shown from this Cisco switch, what is the reason that interface FastEthernet 0/10 is not the root port for VLAN 2? A. This switch has more than one interface connected to the root network segment in VLAN 2. B. This switch is running RSTP while the elected designated switch is running 802.1d Spanning Tree. C. This switch interface has a higher path cost to the root bridge than another in the topology. D. This switch has a lower bridge ID for VLAN 2 than the elected designated switch. Answer: C Explanation Since the port is in the blocked status, we must assume that there is a shorter path to the root bridge elsewhere. Question #:2 - (Exam Topic 4) Which command should you enter to configure a single port to bypass the spanning-tree Forward and Delay timers? A. spanning-tree portfast B. spanning-tree portfast default C. spanning-tree portfast bpdufilter default D. spanning-tree portfast bpduguard default Only exact questions will Pass You in Exam 2 of 11 Exact Questions Cisco - 200-125 Answer: A Only exact questions will Pass You in Exam 3 of 11 Exact Questions Cisco - 200-125 Topic 3, New Pool Exam C Question #:3 - (Exam Topic 3) Only exact questions will Pass You in Exam 4 of 11 Exact Questions Only exact questions will Pass You in Exam Cisco - 200-125 5 of 11 Exact Questions Only exact questions will Pass You in Exam Cisco - 200-125 6 of 11 Exact Questions Cisco - 200-125 Which statement about the router configurations is correct? A. PPP PAP is authentication configured between Branch2 and R1. B. Tunnel keepalives are not configured for the tunnel0 interface on Branch2 and R2. C. The Branch2 LAN network 192.168.11 0/24 is not advertised into the EIGRP network. D. The Branch3 LAW network 192.168.10.0/24 is not advertised into the EIGRP network. E. PPP CHAP is authentication configured between Branch1 and R1. Answer: D Explanation When we check Branch3 router we notice that “network 192.168.10.0” command is missing under “router eigrp 100” Question #:4 - (Exam Topic 3) Drag the security features on the left to the specific security risks they help protect against on the right. (Not Only exact questions will Pass You in Exam 7 of 11 Exact Questions Cisco - 200-125 all options are used.) Answer: Explanation Only exact questions will Pass You in Exam 8 of 11 Exact Questions Cisco - 200-125 Topic 5, New Pool E (Latest) Question #:5 - (Exam Topic 5) Which two commands can you use to troubleshoot DHCP issues? (Choose two) A. service dhcps B. ip helper-address C. clear ip route dhcp D. show ip route dhcp E. show ip name-server Answer: A B Question #:6 - (Exam Topic 5) Refer to the Exhibit. Which two routes are using a link state protocol? (Choose two) A. 172.20.30.21 B. 192.168.11.0/24 C. 172.20.20.21 D. 172.20.10.21 E. 192 168 10 0/24 Answer: B C Only exact questions will Pass You in Exam 9 of 11 Exact Questions Cisco - 200-125 Topic 2, New Pool Exam B Question #:7 - (Exam Topic 2) Refer to the exhibit. Which feature is enabled by this configuration? A. static NAT translation B. a DHCP pool C. a dynamic NAT address pool D. PAT Answer: C Question #:8 - (Exam Topic 2) Which NAT command can be applied to an interface? A. ip nat inside B. ip nat inside test access-list-number pool pool-name C. ip nat inside source static 10.10.10.010.10.10.50 D. ip nat pool test 10.10.10.0 10.10.10.50 255.255.255.0 Answer: A Only exact questions will Pass You in Exam 10 of 11 Exact Questions Cisco - 200-125 Topic 1, New Pool Exam A Question #:9 - (Exam Topic 1) Which two steps must you perform on each device that is configured for ipv4 routing before you implement OSPFv3? (chooose two) A. configure an autonomous system number B. configure a loopback interface C. configure a router ID D. enable IPv6 on an interface E. enable IPv6 unicast routing Answer: C E Question #:10 - (Exam Topic 1) On which type of port can switches interconnect for multi-VLAN communication? A. interface port B. access port C. switch port D. trunk port Answer: D Only exact questions will Pass You in Exam 11 of 11 About exact2pass.com exact2pass.com was founded in 2007. We provide latest & high quality IT / Business Certification Training Exam Questions, Study Guides, Practice Tests. We help you pass any IT / Business Certification Exams with 100% Pass Guaranteed or Full Refund. Especially Cisco, CompTIA, Citrix, EMC, HP, Oracle, VMware, Juniper, Check Point, LPI, Nortel, EXIN and so on. View list of all certification exams: All vendors We prepare state-of-the art practice tests for certification exams. You can reach us at any of the email addresses listed below. Sales: [email protected] Feedback: [email protected] Support: [email protected] Any problems about IT certification or our products, You can write us back and we will get back to you within 24 hours.