International
R
Wallstations
QSWE 2b 02.17.09
Color and Engraving Codes
QSWE-2BN-___-___
QSWE-2BI-___-___
2-Button Wallstation
LEDs
1
Engraving
Off
QSWE-2BN-WH-EGN
(Non-insert version)
Description
• Often used in entryways to select Scene 1 and Off.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and
operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for easy
reading.
• Options for programming buttons after installation (choose one):
- Recalls preset light levels for two scenes: 1 and Off, 5 and Off,
9 and Off, 13 and Off, 1 and 2, 5 and 6, 9 and 10, 13 and 14.
- Each button will toggle a zone or a group of zones.
- LEDs reflect door status of one partition.
- Starts or stops one sequence (Scenes 1-4 or 5-16 sequence).
- Disables keypads and makes lights go to Scene 16.
- Allows fine-tuning of a group of zones.
• Receives up to two contact closure inputs via a connector on
the back of the Wallstation.
• Contact closure features:
- When keypad is programmed as scene, panic, zone toggle or
sequence, input 1 closure will perform the top button action,
and input 2 closure will perform the bottom button action.
- When keypad is programmed as a partition control, input 1
and input 2 closures will open the partition, and input 1 and
input 2 openings will close the partition.
- When keypad is programmed to fine-tune, input 1 controls
raising (closure = start; opening = stop) and input 2 controls
lowering (closure = start; opening = stop).
Finish and Engraving Options
• Standard model wallstations are white and come unengraved.
• Custom button engraving (NST; see page 3) available.
• Three engraving options are available: General Engraving (EGN)
and Non-Standard Text Engraving (NST). For more details,
please visit the GRAFIK Eye® QS website at
www.lutron.com/grafikeyeqs.
QSWE-2BI-WH
(Insert version)
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 1
International
R
Wallstations
QSWE 3b 02.17.09
Color and Engraving Codes
QSWE-3BN-___-___
QSWE-3BI-___-___
3-Button Wallstation
LEDs
1
2
Off
Engraving
QSWE-3BN-WH-EGN
(Non-insert version)
Description
• Often used to select scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and
operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for easy
reading.
• Options for programming buttons after installation (choose one):
- Recalls preset light levels for scenes (1-3, 5-7, 9-11, 13-15; or
1, 2, and Off; 5, 6, and Off; 9, 10, and Off, 13, 14, and Off).
- Each button will toggle a zone or a group of zones.
- LEDs reflect door status of three partitions.
• Receives up to two contact closure inputs via a connector on
the back of the Wallstation.
• Contact closure features:
- When keypad is programmed as scene or zone toggle, input 1
closure will perform the top button action, and input 2 closure
will perform the bottom button action.
- When keypad is programmed as a partition control, input 1
controls the partition programmed to the top button (closure =
open partition; opening = close partition) and input 2 controls
the partition programmed to the bottom button (closure = close
partition; opening = open partition).
Finish and Engraving Options
• Standard model wallstations are white and come unengraved.
• Custom button engraving (NST; see page 3) available.
• Three engraving options are available: General Engraving (EGN)
and Non-Standard Text Engraving (NST). For more details,
please visit the GRAFIK Eye® QS website at
www.lutron.com/grafikeyeqs.
QSWE-3BI-WH
(Insert version)
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 2
International
R
Wallstations
QSWE 4b 02.17.09
Color and Engraving Codes
QSWE-4BN-___-___
QSWE-4BI-___-___
4-Button Wallstation
LEDs
QSWE-4BN-WH
(Non-insert version)
Description
• Often used to select scenes; often to select between 4 scenes
and Off.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and
operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for easy
reading.
• Options for programming buttons after installation (choose one):
- Recalls preset light levels for scenes (1-4, 5-8, 9-12, 13-16; or
1-3 and Off, 5-7 and Off, 9-11 and Off, 13-15 and Off).
- Each button will toggle a zone or a group of zones.
- LEDs reflect door status of four partitions.
• Receives up to two contact closure inputs via a connector on
the back of the Wallstation.
• Contact closure features:
- When keypad is programmed as scene or zone toggle, input 1
closure will perform the top-left button action, and input 2
closure will perform the bottom-right button action.
- When keypad is programmed as a partition control, input 1
controls the partition programmed to the top button (closure =
open partition; opening = close partition) and input 2 controls
the partition programmed to the bottom button (closure = open
partition; opening = close partition).
Finish and Engraving Options
1
3
2
Off
• Standard model wallstations are white and come unengraved.
• Custom button engraving (NST; see page 3) available.
• Three engraving options are available: General Engraving (EGN)
and Non-Standard Text Engraving (NST). For more details,
please visit the GRAFIK Eye® QS website at
www.lutron.com/grafikeyeqs.
Engraving
QSWE-4BI-WH-EGN
(Insert version)
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 3
International
R
Wallstations
QSWE 5brl 02.17.09
Color and Engraving Codes
QSWE-5BRLN-___-___
QSWE-5BRLI-___-___
5-Button Wallstation with
Raise/Lower
LEDs
1
2
3
4
Scene
Selection
Buttons
Off
Engraving
Master Raise/Lower
QSWE-5BRLN-WH-EGN
(Non-insert version)
Open
Preset 1
Description
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and
operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for easy
reading.
• Master raise/lower brightens or dims all lighting or raises/lowers
all assigned shades in the last selected scene or toggled group.
• Options for programming buttons after installation (choose one):
- Recalls preset light levels for scenes (1-4 and Off, 5-8 and Off,
9-12 and Off, 13-16 and Off, or 1-5, 5-9, or 9-13).
- Each button will toggle a zone or a group of zones.
- LEDs reflect door status of five partitions.
• Shade control features:
- Can control Sivoia® QS Window Treatments.
- Pressing the Open (or Close) button once will cause the
window treatments to move to their fully open (or closed)
position. Tap any button (regardless of function) to stop a
shade that is in motion.
• Receives up to two contact closure inputs via a connector on
the back of the Wallstation.
• Contact closure features:
- When keypad is programmed as scene, zone toggle, or shade
control, input 1 closure will perform the top button action, and
input 2 closure will perform the bottom button action.
- When keypad is programmed as a partition control, input 1
controls the partition programmed to the top button (closure =
open partition; opening = close partition) and input 2 controls
the partition programmed to the bottom button (closure =
close partition; opening = open partition).
Preset 2
Preset 3
Finish and Engraving Options
Close
• Standard model wallstations are white and come unengraved.
• Available with button engraving that can be customized for
lighting and/or shade applications on any model.
• Three engraving options are available: General Engraving (EGN),
Standard Engraving (E01), and Non-Standard Text Engraving
(NST). For more details, please visit the GRAFIK Eye® QS
website at www.lutron.com/grafikeyeqs.
• E01 engraving option allows control of one group of shades. See
page 3 for NST control options.
QSWE-5BRLI-WH-E01
(Insert version)
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 4
International
R
Wallstations
QSWE 5brlir 02.17.09
Color and Engraving Codes
QSWE-5BRLIRN-___-___
QSWE-5BRLIRI-___-___
5-Button Wallstation with
Infrared Receiver and Raise/Lower
LEDs
1
2
3
4
Off
Scene
Selection
Buttons
Engraving
IR Window
QSWE-5BRLIRN-WH-EGN
(Non-insert version)
Master
Raise/Lower
Open
Preset 1
Preset 2
Preset 3
Description
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and
operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for easy
reading.
• Master raise/lower brightens or dims all lighting or raises/lowers
all assigned shades in the last selected scene or toggled group.
• Options for programming buttons after installation (choose one):
- Recalls preset light levels for scenes (1-4 and Off, 5-7 and Off,
9-11 and Off, 13-15 and Off or 1-5, 5-9, or 9-13).
- Recalls preset light levels for 4 scenes plus Off with
4-scene Wireless Remote Control (GRX-IT), or 8 scenes plus
Off with 8-scene Wireless Remote Control (GRX-8IT).
- Each button will toggle a zone or a group of zones.
- LEDs reflect door status of five partitions.
• Shade control features:
- Can control Sivoia® QS Window Treatments.
- Also controls shades with wireless IR controllers
SVQ-3PIT, SVQ-OCIT, SVQ-4GD-OCIT, and SVQ-4S2G-IT.
- Pressing the Open (or Close) button once will cause the
window treatments to move to their fully open (or closed)
position. Tap any button (regardless of function) to stop a
shade that is in motion.
• Receives up to two contact closure inputs via a connector on
the back of the Wallstation.
• Contact closure features:
- When keypad is programmed as scene, zone toggle, or shade
control, input 1 closure will perform the top button action, and
input 2 closure will perform the bottom button action.
- When keypad is programmed as a partition control, input 1
controls the partition programmed to the top button (closure =
open partition; opening = close partition) and input 2 controls
the partition programmed to the bottom button (closure =
close partition; opening = open partition).
Close
Finish and Engraving Options
• Standard model wallstations are white and come unengraved.
• Available with button engraving that can be customized for
lighting and/or shade applications on any model.
• Three engraving options are available: General Engraving (EGN),
Standard Engraving (E01), and Non-Standard Text Engraving
(NST). For more details, please visit the GRAFIK Eye® QS
website at www.lutron.com/grafikeyeqs.
• E01 engraving option allows control of one group of shades. See
page 3 for NST control options.
QSWE-5BRLIRI-WH-E01
(Insert version)
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 5
International
R
Wallstations
QSWE 6brl 02.17.09
Color and Engraving Codes
QSWE-6BRLN-___-___
QSWE-6BRLI-___-___
Dual Wallstation with 3-Button
and 3-Button with Raise/Lower
LEDs
Group 1
Open
Group 2
Preset
Group 3
Close
Engraving
Raise/Lower
QSWE-6BRLN-WH-E01
(Non-insert version)
1
Open
2
Preset
Off
Close
QSWE-6BRLI-WH-EGN
(Insert version)
Description
• Often used to control one or more lighting or window treatment
zones simultaneously.
• Often used to select three different groups of shades using Open,
Close, and Raise/Lower.
- Used to control multiple groups of shades independently from a
single-gang keypad (e.g., a window with a sheer shade and a
blackout shade).
• Can control Sivoia® QS Window Treatments.
• Functions as two independently programmable controllers: a
3-button (left keypad group) and a 3-button (right keypad group).
Can control two lighting zones, two shade zones, or one of each.
Or can function as one shade group control where the right keypad
controls the group of shades indicated by the left keypad.
• Options for programming buttons of left three-button keypad group
after installation (choose one):
- Recalls preset light levels for scenes (1, 2, and Off; 5, 6, and Off;
9, 10, and Off; 13, 14, and Off; or 1-3, 5-7, 9-11, or 13-15).
- Each button will toggle a zone or a group of zones.
- LEDs reflect door status of three partitions.
• Options for programming buttons of right two-button keypad after
installation (choose one):
- Recalls preset light levels for scenes (1, 2, and Off; 5, 6, and Off;
9, 10, and Off; 13, 14, and Off; or 1-3, 5-7, 9-11, or 13-15). And
raise/lower last preset activated.
- Each button will toggle a zone or a group of zones. Raise/lowers
affect last toggled zone.
- Control a group of shades.
• Large, rounded buttons are easy to use.
• Backlit buttons with on-button engraving make it easy to find and
operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• Pressing the Open (or Close) button once will cause the window
treatments to move to their fully open (or closed) position. Tap any
button (regardless of function) to stop a shade that is in motion.
• The LEDs next to each button are used during programming and
provide feedback when the buttons are pressed.
• Receives up to two contact closure inputs via a connector on the
back of the Wallstation.
• Contact closure features:
- When the left keypad group is programmed as scene, zone toggle,
or shade control, input 1 closure will perform the top button action,
and input 2 closure will perform the bottom button action.
- When the left keypad is programmed as a partition control, input
1 controls the partition programmed to the top button (closure =
open partition; opening = close partition) and input 2 controls the
partition programmed to the bottom button (closure = close
partition; opening = open partition).
Finish and Engraving Options
• Standard model wallstations are white and come unengraved.
• Available with button engraving that can be customized for lighting
and/or shade applications on any model.
• Three engraving options are available: General Engraving (EGN),
Standard Engraving (E01), and Non-Standard Text Engraving
(NST). For more details, please visit the GRAFIK Eye® QS website
at www.lutron.com/grafikeyeqs.
• E01 engraving option allows control of three groups of shades.
See page 3 for NST control options.
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 6
International
R
QSWE 7brl 02.17.09
Color and Engraving Codes
QSWE-7BRLN-___-___
QSWE-7BRLI-___-___
7-Button Wallstation with
Raise/Lower
LEDs
1
1
2
3
4
Off
Scene
Selection
Buttons
Off
Engraving
Master Raise/Lower
QSWE-7BRLN-WH-EGN
(Non-insert version)
Open
Group 1
Preset 1
Preset 2
Preset 3
Group 2
Close
QSWE-7BRLI-WH-E01
(Insert version)
Wallstations
Description
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and
operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• Master raise/lower brightens or dims all lighting or raises/lowers
all assigned shades in the last selected scene or toggled group.
• Functions as two independently programmable controllers: a 2-button
(left keypad group) and a 5-button (right keypad group). Can control
two lighting zones, two shade zones, or one of each. Or can function
as one shade group control where the right keypad controls the
group of shades indicated by the left keypad.
• Options for programming right column buttons after installation
(choose one):
- Recalls preset light levels for scenes (1-4 and Off, 5-8 and Off,
9-12 and Off, 13-16 and Off or 1-5, or 5-9 or 9-13).
- Each button will toggle a zone or a group of zones.
• Options for programming left column buttons after installation
(choose one):
- Recalls preset light levels for scenes (1 and Off; 5 and Off;
9 and Off, 13 and Off; or 1, 2; or 5, 6; or 9, 10; or 13, 14).
- LEDs reflect status of one partition.
- Starts or stops one sequence.
- Disables keypads and goes to scene 16.
- Allows fine-tuning of a group of zones.
• Shade control features:
- Used to control multiple groups of shades independently from
a single-gang keypad (e.g., a window with a sheer shade and
a blackout shade).
- Can control Sivoia® QS Window Treatments.
- Pressing the Open (or Close) button once will cause the window
treatments to move to their fully open (or closed) position. Tap any
button (regardless of function) to stop a shade that is in motion.
• Receives up to two contact closure inputs via a connector on
the back of the Wallstation.
• Contact closure features:
- When the left keypad is programmed as scene or zone toggle, or
shade control, input 1 closure will perform the top button action,
and input 2 closure will perform the bottom button action.
- When the left keypad is programmed as a partition control,
input 1 controls the partition programmed to the top button
(closure = open partition; opening = close partition) and input 2
controls the partition programmed to the bottom button
(closure = close partition; opening = open partition).
• Functions as two independently programmable controllers when
general engraving or no engraving are ordered. Left keypad
function mimics a 2-button keypad and right keypad mimics a
5-button keypad. See function details on page 5.
Finish and Engraving Options
• Standard model wallstations are white and come unengraved.
• Available with button engraving that can be customized for
lighting and/or shade applications on any model.
• Three engraving options are available: General Engraving (EGN),
Standard Engraving (E01), and Non-Standard Text Engraving
(NST). For more details, please visit the GRAFIK Eye® QS
website at www.lutron.com/grafikeyeqs.
• E01 engraving option allows control of two groups of shades.
See page 3 for NST control options.
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 7
International
R
QSWE 8brl 02.17.09
Color and Engraving Codes
QSWE-8BRLN-___-___
QSWE-8BRLI-___-___
8-Button Wallstation with
Raise/Lower
LEDs
Open
1
Preset 1
2
Preset 2
Preset 3
Off
Scene
Selection
Buttons
Close
Engraving
Master Raise/Lower
QSWE-8BRLN-WH-EGN
(Non-insert version)
Open
Group 1
Preset 1
Group 2
Preset 2
Preset 3
Group 3
Close
QSWE-8BRLI-WH-E01
(Insert version)
Wallstations
Description
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and
operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• Master raise/lower brightens or dims all lighting or raises/lowers all
assigned shades in the last selected scene or toggled group.
• Functions as two independently programmable controllers: a 3-button
(left keypad group) and a 5-button (right keypad group). Can control
two lighting zones, two shade zones, or one of each. Or can function
as one shade group control where the right keypad controls the group
of shades indicated by the left keypad.
• Options for programming the right column of buttons after
installation (choose one):
- Recalls preset light levels for scenes (1-4 and Off, 5-8 and Off,
9-12 and Off, 13-16 and Off; or 1-5, or 5-9, or 9-13).
- Each button will toggle a zone or a group of zones.
- LEDs reflect status of five partitions.
- Can control Sivoia® QS Window Treatments.
• Options for programming the left column of buttons after
installation (choose one):
- Recalls preset light levels for scenes (1, 2, and Off; 5, 6, and Off; 9, 10,
and Off; 13, 14, and Off; or 1-3, or 5-7, or 9-11, or 13-15)
- Each button will toggle a zone or a group of zones.
- Used to control multiple groups of shades independently from a
single-gang keypad (e.g., a window with a sheer shade and a
blackout shade).
- Can control Sivoia® QS Window Treatments.
- Pressing the Open (or Close) button once will cause the window
treatments to move to their fully open (or closed) position. Tap
any button (regardless of function) to stop a shade that is in
motion.
• Receives up to two contact closure inputs via a connector on the
back of the Wallstation.
• Contact closure features:
- When the left keypad is programmed as scene or zone toggle, or
shade control, input 1 closure will perform the top button action, and
input 2 closure will perform the bottom button action.
- When left keypad is programmed as a partition control, input 1
controls the partition programmed to the top button (closure =
open partition; opening = close partition)
and input 2 controls the partition programmed to the bottom
button (closure = open partition; opening = close partition).
• Functions as two independently programmable controllers when
general engraving or no engraving are ordered. Left keypad function
mimics a 3-button keypad and right keypad mimics a 5-button
keypad. See function details on page 5.
Finish and Engraving Options
• Standard model wallstations are white and come unengraved.
• Available with button engraving that can be customized for lighting
and/or shade applications on any model.
• Three engraving options are available: General Engraving (EGN),
Standard Engraving (E01), and Non-Standard Text Engraving
(NST). For more details, please visit the GRAFIK Eye® QS website
at www.lutron.com/grafikeyeqs.
• E01 engraving option allows control of three groups of shades.
See page 3 for NST control options.
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 8
International
R
QSWE 8brlir 02.17.09
Color and Engraving Codes
QSWE-8BRLIRN-___-___
QSWE-8BRLIRI-___-___
8-Button Wallstation with
Infrared Receiver and Raise/Lower
LEDs
Open
1
Preset 1
2
Preset 2
Off
Close
Preset 3
Scene
Selection
Buttons
Engraving
IR Window
QSWE-8BRLIRN-WH-EGN
(Non-insert version)
Master
Raise/Lower
Open
Group 1
Preset 1
Group 2
Preset 2
Preset 3
Group 3
Wallstations
Description
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and operate
the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for easy reading.
• Master raise/lower brightens or dims all lighting or raises/lowers all
assigned shades in the last selected scene or toggled group.
• Functions as two independently programmable controllers: a 3-button (left
keypad group) and a 5-button (right keypad group). Can control two lighting
zones, two shade zones, or one of each. Or can function as one shade
group control where the right keypad controls the group of shades indicated
by the left keypad.
• Options for programming the right column of buttons after installation
(choose one):
- Recalls preset light levels for scenes (1-4 and Off, 5-7 and Off, 9-11
and Off, 13-15 and Off or 1-5, or 5-9, or 9-13).
- Recalls preset light levels for 4 scenes plus Off with 4-scene Wireless
Remote Control (GRX-IT), or 8 scenes plus Off with 8-scene Wireless
Remote Control (GRX-8IT).
- Each button will toggle a zone or a group of zones.
- LEDs reflect door status of five partitions.
• Options for programming the left column of buttons after installation
(choose one):
- Recalls preset light levels for scenes (1, 2, and Off; 5, 6, and Off; 9, 10, and
Off; 13, 14, and Off; or 1-3, or 5-7, or 9-11, or 13-15)
- Each button will toggle a zone or a group of zones.
- Used to control multiple groups of shades independently from a singlegang keypad (e.g., a window with a sheer shade and a blackout shade).
- Can control Sivoia® QS Window Treatments.
- Pressing the Open (or Close) button once will cause the window
treatments to move to their fully open (or closed) position. Tap any button
(regardless of function) to stop a shade that is in motion.
• Receives up to two contact closure inputs via a connector on the back
of the Wallstation.
• Contact closure features:
- When the left keypad is programmed as scene or zone toggle, or
shade control, input 1 closure will perform the top button action, and
input 2 closure will perform the bottom button action.
Close
- When left keypad is programmed as a partition control, input 1 controls
the partition programmed to the top button (closure = close partition;
opening = close partition) and input 2 controls the partition programmed
to the bottom button (closure = open partition; opening = close partition).
• Shade control features:
- Used to control multiple groups of shades independently from a singlegang keypad (e.g., a window with a sheer shade and a blackout shade).
- Can control Sivoia® QS Window Treatments.
- Also controls shades with wireless IR controllers SVQ-3PIT, SVQ-OCIT,
SVQ-4GD-OCIT, and SVQ-4S2G-IT.
- Pressing the Open (or Close) button once will cause the window
treatments to move to their fully open (or closed) position. Tap any button
(regardless of function) to stop a shade that is in motion.
QSWE-8BRLIRI-WH-E01
(Insert version)
Finish and Engraving Options
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
• Standard model wallstations are white and come unengraved.
• Available with button engraving that can be customized for lighting
and/or shade applications on any model.
• Three engraving options are available: General Engraving (EGN),
Standard Engraving (E01), and Non-Standard Text Engraving (NST).
For more details, please visit the GRAFIK Eye® QS website at
www.lutron.com/grafikeyeqs.
• E01 engraving option allows control of three groups of shades. See
page 3 for NST control options.
Model Numbers:
Page 9
International
R
QSWE 10brl 02.17.09
Color and Engraving Codes
QSWE-10BRLN-___-___
QSWE-10BRLI-___-___
10-Button Wallstation with
Raise/Lower
LEDs
1
6
2
7
3
8
4
9
5
Off
Scene
Selection
Buttons
Engraving
Master Raise/Lower
QSWE-10BRLN-WH-EGN
(Non-insert version)
1
Open
2
Preset 1
3
Preset 2
4
Preset 3
Off
Close
Job Number:
• Often used to select and adjust scenes.
• Large, rounded buttons are easy to use.
• Backlit buttons with optional engraving make it easy to find and
operate the Wallstation in low light conditions.
• Optional button engraving is angled up to the eye for easy
reading.
• Master raise/lower brightens or dims all lighting or raises/lowers
all assigned shades in the last selected scene or toggled group.
• Functions as one column that can:
- Control scenes 1-9, Off, or 1-10.
- Each button will toggle a zone or a group of zones.
- LEDs reflect door status of ten partitions.
• If shade engraving is selected, control functions as two
independent controllers. The left column controls scenes.The
right column controls Sivoia QS® Window Treatments.
• Receives up to two contact closure inputs via a connector on
the back of the Wallstation.
• Contact closure features:
- When the left keypad is programmed as scene or zone toggle, or
shade control, input 1 closure will perform the top button action,
and input 2 closure will perform the bottom button action.
- When left keypad is programmed as a partition control, input 1
of the partition programmed to the top button (closure = open
partition; opening = close partition) and input 2 controls the
partition programmed to the bottom button (closure = open
partition; opening = close partition).
• Shade control features:
- Can control Sivoia QS Window Treatments.
- Pressing the Open (or Close) button once will cause the
window treatments to move to their fully open (or closed)
position. Tap any button (regardless of function) to stop a
shade that is in motion.
Finish and Engraving Options
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Description
• Standard model wallstations are white and come unengraved.
• Available with button engraving that can be customized for
lighting and/or shade applications on any model.
• Three engraving options are available: General Engraving (EGN),
Standard Engraving (E01), and Non-Standard Text Engraving
(NST). For more details, please visit the GRAFIK Eye® QS
website at www.lutron.com/grafikeyeqs.
• Functions as two independently programmable controllers when
general engraving or no engraving are ordered. Left keypad
function mimics a 5-button keypad and right keypad mimics a
5-button keypad. See function details on page 5.
• E01 engraving option allows control of one group of shades and
one group of lights. See page 3 for NST control options.
QSWE-10BRLI-WH-E01
(Insert version)
R
Wallstations
Model Numbers:
Page 10
Wallstations
International
R
QSWE 2 02.17.09
Specifications
Power Input (Control Link Terminal 2)
Front View
Low-voltage type PELV. Operating voltage: 24 V
Key Design Features
• Field-changeable button and faceplate assemblies allow easy
customization.
• Meets IEC 801-2. Tested to withstand 15 kV electro-static discharge
without damage or memory loss.
• Faceplate snaps on with no visible means of attachment.
• Available as an “insert” style control for multi-ganging.
• Use Faceplate Replacement Kits to change color, button configuration, or engraving.
• Faceplate Replacement Kits may also be used to convert between
non-insert and insert configurations.
Side View
System Communications and Capacity
• Low-voltage type PELV wiring connects Wallstations to other devices on the QS
Link.
• A QS system can have up to 100 devices and 100 zones; International seeTouch QS
counts as one device and no zones on the QS Link.
Terminals
Accept up to two 1.0 mm2 (18 AWG) typical.
Environment
0 - 40 °C (32 - 104 °F). Relative humidity less than 90% non-condensing.
Mounting
Typical backbox dimensions: 200 mm (77/8 in) wide x 94 mm (33/4 in) tall x
76 mm (3 in) deep.
2
3
4
Job Name:
Job Number:
Model Numbers:
A
S P E C I F I C AT I O N S U B M I T TA L
B
R
QS Link
Connector
C
1
Back View
Sensor/
Contact
Closure
Input
Connector
Page 11
Wallstations
International
R
How to Build a Standard International seeTouch QS Model Number
QSWE-
-WH
Insert
Button
Configuration Style
(see next page)
Prefix
QSWE 3 02.17.09
White
Matte
Finish
N: Non-insert
I: Insert
How to Build a Custom International seeTouch QS Model Number
QSWE-
Insert
Button
Configuration Style
(see next page)
Prefix
Color/
Finish
Engraving
Code
N: Non-insert
I: Insert
Engraving Codes
Color/Finish Codes
Satin Color Matte FinishesTM
Available with Insert (I) style controls only.
Argentum
AR
Mica
MC
Arctic white
AW
Architectural Metal Finishes
With black plastic
Bright Brass
Bright Chrome
Bright Nickel
Satin Brass
Satin Chrome
Satin Nickel
Omit: Unengraved
EGN: General Engraving
See page 1 button engraving for function
E01: Standard Engraving
See page 1 button engraving for shade
function
NST: Non-Standard Text Engraving
Please visit the GRAFIK Eye® QS
website at www.lutron.com/grafikeyeqs
for custom engraving forms
buttons (standard).
BB
BC
BN
SB
SC
SN
Special Metal Finishes
Antique Brass
Antique Bronze
Gold Plated
QB
QZ
AV
*Note: Some Satin Colors units ship with
different color buttons. For more information,
please visit the seeTouch website at
www.lutron.com/seetouch.
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 12
Wallstations
International
R
QSWE 4 02.17.09
How to Build an International seeTouch QS Model Number (continued)
Button Configurations
2B
3B
4B
5BRL
2-button
3-button
4-button
5-button with raise/lower
5BRLIR
6BRL
5-button with IR receiver
and raise/lower
6-button with raise/lower
8BRLIR
8-button with IR receiver
and raise/lower
R
Job Number:
8BRL
5-button with raise/lower
10BRL
10-button with raise/lower
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
7BRL
7-button with raise/lower
Model Numbers:
Page 13
Wallstations
International
R
QSWE 5 02.17.09
seeTouch® QS Wallstation Button Functions Summary
Button Configuration
2B
3B
4B
5BRL
5BRLIR
1, Off
1, 2, Off
1-3, Off
1-4, Off
1-3, Off
5-7, Off
9-11, Off
13-15, Off
WT
Left
EGN Functionality
E01 Functionality
7BRL
6BRL
Right Left
See 3B WT
Right
See 2B WT
8BRL
8BRLIR
Left Right
See 3B WT
10BRL
Left Right
1-9 Off
WT: 3 Groups WT: 2 Groups WT: 3 Groups See 5B
WT
NST Options
Scene Options
Zone
1-4, Off See 3B See 3B See 2B See 5B See 3B See 5B
5-8, Off
9-12, Off
13-16, Off
1-5
5-9
9-13
1, Off
5, Off
9, Off
13, Off
1, 2
5, 6
9, 10
13, 14
1, 2, Off
5, 6, Off
9, 10, Off
13, 14, Off
1-3
5-7
9-11
13-15
1, 3, Off
5, 7, Off
9, 11, Off
13, 15, Off
1-4
5-8
9-12
13-16
X
X
X
X
X
X
X
X
X
X
X
Partition Function
X
2B Partition Function
X
X
Zone Lockout Function
X
X
Fine Tune Function
X
X
Sequence Function
X
X
Panic Function
X
X
Window Treatments
Function
X
X
1-9, Off
1-10
X
X
X
X
X
X
X
X
X
X
WT - Window Treatments
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 14
Wallstations
International
R
QSWE 6 02.17.09
Wallstation Installation
Wiring to Control Link
Control Station Device (CSD) Link
Wiring
Data Link - (1) twisted, shielded pair
1.0 mm2 (22 AWG )
3: MUX
4: MUX
Faceplate Replacement Kits
Use Faceplate Replacement Kits to change:
colors, button configuration, engraving, between
insert and non-insert versions. Each Kit includes
an adapter, button assembly, and wallplate
Non-Insert Kit
3
4
Rear of International
seeTouch QS Wallstation
Note: Use appropriate wire connecting
devices as specified by local codes.
Model Numbers for Kits
QSWE-2BN
QSWE-3BN
QSWE-4BN
QSWE-5BRLN
QSWE-5BRLIRN
QSWE-6BRLN
QSWE-7BRLN
QSWE-8BRLN
QSWE-8BRLIRN
QSWE-10BRLN
Insert Kit
Job Number:
QSWE-2BI
QSWE-3BI
QSWE-4BI
QSWE-5BRLI
QSWE-5BRLIRI
QSWE-6BRLI
QSWE-7BRLI
QSWE-8BRLI
QSWE-8BRLIRI
QSWE-10BRLI
Page 15
R
Job Name:
A
(2) 18 AWG
(1.0 mm2)
2
1
(2) 18 AWG
(1.0 mm2)
B
Faceplate Information
PELV Control wiring
(2) 1.0 mm2 (18 AWG)
1: Common
2: 24 V
C
• Use low-voltage PELV wiring to connect
Wallstations to the QS link.
• Make connections inside the wallbox or in
a switch/junction box with a maximum
wire length of 2.5 m (8 ft) from the link to
the Wallstation.
• Two 1.0 mm2 (18 AWG) conductors for
common (terminal 1) and 24 V
(terminal
2). These will not fit in terminals. Connect
as shown.
• One shielded, twisted pair 1.0 mm2
(22 AWG) for data link (terminals 3 and 4).
• Connect Drain/Shield as shown. Do not
connect to Ground (Earth) or Wallstation.
Connect the bare drain wires and cut off
the outside shield.
Model Numbers:
R
Wallstations
International
QSWE 7 12.17.09
Contact Closure Inputs
Contact Closure Input Wiring
• Use low-voltage PELV wiring to connect the contact
closure inputs to the Wallstation.
(3) 1.0 mm2
#18 AWG
3
A
4
B
B: Input 2
C
C: Common
2
• Inputs must be dry contact closure or groundreferenced solid-state outputs:
• Wallstation is miswire protected up to 36 V .
• Outputs must stay in the closed or open states for at
least 40 msec in order to be recognized by the
Wallstation.
• To ensure compatibility with wired occupancy sensors,
only use sensors with the Relay model option – those
with model numbers ending with R
(LOS-CDT-xxxxR or LOS-WDT-R)
1
Specifications
A: Input 1
Rear of International
seeTouch QS Wallstation
R
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
Model Numbers:
Page 16