Hand-held measuring instruments
Multi-Handy 3050 and Multi-System 5050
Limburg
[sec]
p1
0/200
MINMAX
ISDS
+p2
150
0/200
° T1
-50/200
<SKAL>
Multi System 5050
Intelligent Sensor
Detection System
!"
# $%&'
Limburg
p1
( bar)
p2
( bar)
p3
( bar)
Q1
(l/min)
120.4
210.6
360.2
160.7
Multi Handy 3050
&'
&'
&'
!
&()&
/0(,0
/0-*
%
(
&'"
" #$
*(+
1234
*,-.
Test with confidence
Limburg
Messen mit System
English
1
HYDROcomsys/WIN32
The state-of-the-art link between
hand-held measuring
instruments and PC
Nowadays users expect from a hand-held measuring instrument not only an
effortless capturing of data but also the possibility to analyse the data obtained,
using sophisticated software running on personal computers.
Limburg
[sec]
p1
0/200
MINMAX
+p2
150
0/200
° T1
-50/200
<SKAL>
Multi System 5050
"
*
7 8(,9
*
7 8(,9
*"
7 8(,9
7):;9
!
" #$
$
1234
Limburg
%6
%6
"%6
%6
Multi Handy 3050
%
$
&'
&'
&'
!
&()&
/0(,0
/0-*
%
&'"
" #$
RS232
*(+
1234
*,-.
Years ago HYDROTECHNIK recognised that users require, apart from a powerful measuring device, additional software.
HYDROTECHNIK meet the user’s requirements for a simple and fast analysis and
documentation of their various measuring with the special data capture software
„HYDROcomsys/Win32“.
The manufacurer is aware of the fact that the efficiency of a measuring device is increasingly determined by
intelligent software.
Thus, it is only a logical step that the measuring device is accompanied by state-of-the-art software.
Looking at the performance power of this software one may rightly talk of an investimable help for users with the
regards to the display, the analysis, the documentation and the presentation of data.
2
Faster results through rational analysis
Today’s market is generally dominated by complex software requiring intensive training. The results-oriented
engineer requires a user-friendly software that concentrates on the essentials. The program was designed with a
functional and simple user interface in mind (Windows-oriented) allowing the user to benefit from it immediately
without extensive training.
Operation is very simple: select a measuring device, connect the transmission cable, transmit the data online, or
from a storage medium to the PC or Laptop, then display and analyse it.
The software “HYDROcomsys/WIN32” enables any HYDROTECHNIK measuring device equipped with an RS232 or
USB interface to transmit data.
Data may be displayed graphically as well as in tables. Graphics may be processed and enhanced with text.
Results can be printed or stored as data sheet or report format.
Test curves may be transposed to monitor long-term invesitgations; the system also facilitates easy checking of
repeat measuring. Results are either stored on diskette or simply transmitted as email attachments.
The current line of communication between the service engineer and production or between development dept.
and component manufacturer may thus be considerably shortened.
This powerful software is a simple link between PC and measuring device and makes advanced analysis possible
in numerous industrial systems.
See below for the graphical illustration of some characteristics.
Presentation as a drawing with measurement
curves, comments and logotype
Presentation of measuring curves with text,
test report, comments and photo (BMP)
Presentation of a measuring curve with specific
values and logotype (BMP)
Presentation with four measurement curves
3
Multi-Handy 3050 with ISDS, compact with great measuring power
ISDS (Intelligent Sensor Detection System), - integrated into the HYDROTECHNIK sensors represents the superior sensing method, providing the measuring device
with all sensor calibration data automatically.
Example: insert the ISDS pressure sensor
and start measuring, the measuring device
recognises data automatically.
Support software
HYDROcomsys/WIN 32 comfortable data analysis at the PC
Limburg
Limburg
*
5 6(,7
*
5 6(,7
%9
%9
p1
( bar)
p2
( bar)
p3
( bar)
Q1
(l/min)
120.4
210.6
360.2
160.7
Multi Handy 3050
Multi Handy 3050
Supports many standard
printer models
Automatic adaptation
of the display of values
&'
&'
&'
!
&()&
/0(,0
/0-*
%
&'"
" #$
*(+
1234
*,-.
The significant advantages
• 4 measuring channels
• 8 lines of illuminated LCD-display
• Text input
• Min./Max.-display
• Display adaptation
• Calculated values
• 12 bit A/D-converter
• Max.450 000 values / 14 storage places
• Centronics-, RS232- and USB-interfaces
4
• Trigger/Pre-trigger (storing)
• Menu-driven operation or
direct entry
• Graphic or tabular printouts
• Real-time clock
• Battery/ext. power supply 12-30 VDC
Description
Practical , hand held meausuring devices must be userfriendly. ISDS sensors are automatically detected by the
measuring device during the power-up phase and the
following parameters are recognised: measuring range, the
physical size, the unit of measure, the signal exit and the
characteristic curve.
Confusing sensors and the need to enter sensor-specific
data are, therefore, a thing of the past.
The Multi-Handy 3050 with storage capacity and
connectivity to many standard printers, real-time clock and
PC-interface meets today’s challenges.
The unit has a simple to use menu operation similar to that
in mobile phones.
Up to four sensors may be connected and their measuring
results stored simultaneously. Minimum and maximum values
are stored continuously and may be displayed at any time.
Calculations of values, like difference, sum and performance as
well as derivations, e.g., speed are possible. The stored data
may be reproduced as a protocol either graphically or as tables
via a printer, either immediately or at a later time. The USBinterface of the Mulit-Handy 3050 allows a fast data transfer to
a PC.
The data analysis software “HYDROcomsys/WIN32” by
HYDROTECHNIK manages large data volumes either in
graphical or tabular form and or data analysis and there
presentation directly on a PC.
Technical information about the Multi-Handy 3050 with ISDS reference for the specified data: 20°C ±3K
Input channels:
Four in total
3 analogue input, 6-pins: 0 to 20 mA, switchable to 4-20 mA
1 frequency input, 6-pins
Recognition of connected ISDS sensors
Standard measures:
Pressure, pressure peaks, pressure differences, volume flow rate, revolutions, direct current, voltage,
force, torque, distance and speed are freely selectable with 5-character display
revolution: from 60 min -1 (with reference to 1 measuring point) 5-character display
Measuring rate:
Analogue:
1 ms
Frequency input: between 0,25 Hz to 56 Hz a single period measurement.
From 56 Hz on the measuring time is constant = 17.7 ms.
Resolution A/D converter:
12 bit
Extreme value storage:
Background storage for all channels, selectable through approriate keys.
Measured data storage:
Standard 1 MB, approx. 450 000 values in max. measurement series (depending on the selected size).
Freely selectable measuring rate between 1 ms to max. 999 minutes.
Data storage:
Battery powered RAM-storage with time and date.
Display:
8 lines, illuminated LCD display (individually selectable), letter size 4 mm.
4 lines will be automatically displayed in double size.
Interfaces:
Centronics (printer), RS232 (PCs), USB (Universal Serial Bus) for fast data transfer to PCs.
Power supply:
Internal 14.4 NiCd-battery, 1.1 Ah for approx. 8 hours continous operation with integrated battery
charging and charge indicator. External power supply via adapter: 230 VAC / 24 VDC (min. 340 mA) or
third party external power supply (stabilised 12 V to 30 VDC).
Operation environment:
Operating temperature: 0 to+ 50 °C, relative humidity < 80 % (not thawing).
Storage temperature range: -40 °C to+ 70 °C
General:
Casing material:
Dimensions:
Weight:
Technical modifications reserved
ABS-plastic
approx. 107 x 203 x 76 mm (W x L x H)
0,8 kg
5
Multi-System 5050 with ISDS, the larger version with enhanced
facilities
ISDS (Intelligent Sensor Detection System), integrated into the HYDROTECHNIK-sensors represents
the superior sensing method, providing the measuring device with all sensor calibration data
automatically.
Support software with
Example: ISDS pressure sensor
HYDROcomsys/WIN 32All types of ISDS sensors may
the comfortable data analysis
be connected (max. 6)
at the PC
Limburg
Example: measured values
display and graphical
display
Limburg
[sec]
p1 = 185.2
p2 = 168.4
p3 =
48.9
Q1 =
85.34
n1 = 1225
T1 =
64.7
dp1 =
16.8
MINMAX
bar
bar
bar
l/min
U/min
°C
bar
p1
0/200
MINMAX
150
0/200
° T1
-50/200
Multi System 5050
!"
# $%&'
Multi System 5050
Supports many standard printers:
- Epson
- Hewlett Packard
- Cannon etc.
+p2
<SKAL>
Example: external control of a
present limit by the measuring device
or storeage triggered by an
external system
(
Example: coupling of two
measuring devices to increase
the input channels
max. of 12 sensors
The significant advantages
• 6 channels
• 16-line LCD display
for graphics and text
• Text input
• Min./Max.-display
• Display modification
• Calculated values
• 12 bit-converter
• Max. 500 000 values/ 36 storage places
• Centronics-, RS232- and USB-interfaces
• Trigger/Pre-trigger and cyclical storage
6
• External trigger input
• Switching output
• Combination of two trigger conditions
• Display of graphical and text analysis
• Online-display y= f(t) and y= f (x)
• Menu-driven operation or direct entry
• Graphical or tabular printout
• Date and time display
• Battery / ext. power supply 24 to 30 VDC
Description
State-of-the-art hand held measuring devices must conform
with modern technical requirements.
Upon power-up it activates a new comfortable sensor
recognition covering all ISDS-sensors. The previously
required presetting is no longer necessary; measuring may
commence immediately.
A comfortably readable display presents the stored data
graphically. This type of presentation is more meaningful than
the laborious calculation of numerous different values. We are
convinced that you will not want to miss these functions in the
future.
Simply follow the logically designed menu to carry out your
desired program. By providing a generous storage capacity for
500 000 values, one can accommodate even lengthy
measuring processes. The user can select from different
internal trigger choices or an external trigger before storing.
Technical information about Multi-System 5050
In addition, it is possible to access external devices like an SPS.
Calculations of values, like difference, sum and performance as
well as derivations, e.g., speed are possible. The stored data may
be reproduced as a protocol either graphically or as tables via a
printer, either immediately or at a later time, including, of course,
date and time.
The USB-interface allows a fast data transfer to a PC or laptop.
The data analysis software “HYDROcomsys/WIN32” by
HYDROTECHNIK manages large data volumes either in graphical
or tabular form and or data analysis and their presentation directly
at a PC. The integration of data into commom applications like
Word® and Excel® is possible.
reference for the specified data: 20°C ±3K
Input channels:
6 in total
4 analogue inputs, 6-pins: 0 to 20 mA, switchable to 4 to 20 mA or 0 to 10 VDC and two frequency
inputs, 6-pins: with direction recognition. One digital input 3.5 to 30 VDC / max. 1 mA, galvanically
separated for triggering external signals. One output for external devices, 5 to 30 VDC / max. 10 mA open collector.
Recognition of connected ISDS sensors.
Standard measures:
Pressure, pressure peaks, pressure differences, volume flow rate, revolutions, direct current, voltage,
force, torque, distance and speed are freely selectable with 5-character display and floating point.
Measuring rate:
Analogue:
Frequency input:
Resolution A/D converter:
12 bit
Extreme value storage:
Background storage for all channels, selectable through appropriate keys.
Measured data storage:
Standard 1 MB, approx. 500 000 values in max. 36 measuring series (depending on the selected sizes).
Analogue status display (bar chart), freely selectable measuring rate between 1 ms to max. 999 minutes.
Data storage:
Battery powered RAM-storage with time and date.
Display:
16 lines, illuminated LCD display (individually selectable), letter size 4 mm.
Up to 7 lines will be automatically displayed in double size.
Interfaces:
Centronics (printer), RS232 (PCs), USB (Universal Serial Bus) for fast data transfer to PCs.
Power supply:
Internal 14.4 V NiCd-battery, 1.1 Ah for approx. 6 hours continuous operation with integrated battery
charging and charge indicator. External power supply via adapter: 230 VAC / 24 VDC (min. 340 mA) or
third party external power supply (stabilised 18 V to 30 VDC).
Operating environment:
Operating temperature: 0 to+ 50 °C, relative humidity < 80 % (not thawing).
Storage temperature range: -40 °C to+ 70 °C
General:
Casing mterial:
Dimensions:
Weight:
Technical modifications reserved
1 ms
between 0,25 Hz to 91 Hz a single period measurement.
From 91 Hz on the measuring time is constant = 10.9 ms
ABS-plastic
approx. 108 x 277 x 84 mm (W x L x H)
1,4 kg
7
At a glance (Comparing both hand held measuring devices)
Limburg
Limburg
Multi-Handy 3050
3160 - 00 - 63 .00
p1
( bar)
p2
( bar)
p3
( bar)
Q1
(l/min)
120.4
210.6
360.2
160.7
Multi Handy 3050
&'
&'
&'
!
&()&
/0(,0
/0-*
%
&'"
" #$
Multi-System 5050
3160 - 00 - 62 .00
*(+
1234
*,-.
[sec]
p1
0/200
MINMAX
+p2
150
0/200
° T1
Multi System 5050
8
Total of 4
3 analogue inputs, 0 to 20 mA and 4 to 20 mA
1 frequency input
ISDS transducer recognition
!"
# $%&'
(
No. of channels
or inputs
-50/200
<SKAL>
Total of 6
4 analogue inputs 0 to 20 mA, 4 to 20 mA and 0 to 10 VDC
2 frequency inputs
ISDS transducer recognition
Extra digital
input
1, galvanically separated, 3,5 to 30 VDC / max. 1 mA
to trigger external signals
Control output
For connection to external devices, 5 to 30 VDC /
max. 10 mA open collector
Internally
calculated
values
1 x difference, sum, hydraulic power,
derivation: speed from displacement
3 x difference, sum, hydraulic power,
derivation: speed from displacement
Display
Only text with optional background illumination.
Letter size 4 mm, automatic adjustment to maximum
display size: 128 x 64 pixel / 70 x 39 mm (W x H)
Display automatically adjusts to double size for
four or less values.
Text and graphics
Letter size 4 mm, automatic adjustment to maximum
display size: 160 x 128 pixel / 92 x 74 mm (W x H)
Display automatically adjusts to double size for
four or less values
Resolution
A/D-converter
12 Bit
12 Bit
Storage channels
5
8
Memory storage/
measuring values
14 storage locations/ 450 000 readings
for frequencies 150 000 readings
36 storage locations / 500 000 readings
for frequencies 170 000 AD readings
Measuring rate
Freely selectable from 1 ms to 999 minutes
Freely selectable from 1 ms to 999 minutes
Linear tables
Only in connection with ISDS sensors
5 per channel
Interfaces
Centronics, RS 232 and USB
Centronics, RS 232 and USB
ISDS-recognition
Yes
Yes
Storage functions
Manual storage
Triggered storage (1 trigger condition)
Manual storage
Triggered storage
Cyclical storage
Combination of max. 2 trigger conditions
External trigger
No
Yes
Printout
(Printer)
Graphics and tables
Graphics and tables
Graphical curve
display
No
Yes
Real-time clock
Yes
Yes
Power supply
12 to 30 VDC
18 to 30 VDC
Ordering information
Hand-held measuring devices
Order-number
Hand-held measuring instrument:
Multi-Handy 3050
3160 - 00 - 63. 00
Hand-held measuring instrument:
Multi-System 5050
3160 - 00 - 62. 00
Replacement battery
(only for Multi-System 5050)
8873 - 02 - 00. 07
Desktop power supply:
230 VAC/24 VDC/340 mA
8812 - 00 - 00. 28
Socket power supply:
230 VAC/24 VDC/340 mA
8812 - 00 - 00. 19
Socket power supply:
115 VAC/24 VDC/350 mA
8812 - 00 - 00. 20
Carrying case:
(only for Multi-System 5050)
8875 - 01 - 04. 00
Carrying case:
(only for Multi-Handy 3050)
8875 - 01 - 05. 00
Sensors with ISDS (Intelligent Sensor Detection System)
Order number
ISDS allows for the automatic recognition of sensors by hand-held measuring instruments: Multi-Handy 3050 and Multi-System 5050.
The previously required entry of sensor parameters is a thing of the past. The measuring device detects through the sensor the
measuring range, the physical size, the measuring unit, the output signal and the characteristic curve.
– Pressure
Pressure sensor type HT-PD (ISDS)
(Output signal: 0 to 20 mA)
Range
Range
Range
Range
Range
-1
0
0
0
0
to + 6 bar
to 60 bar
to 200 bar
to 400 bar
to 600 bar
3403
3403
3403
3403
3403
-
32 - S - E5.33
21 - S - E5.33
10 - S - E5.33
15 - S - E5.33
18 - S - E5.33
31V7
31V7
31V7
31V7
-
01 - S 70 - S 71 - S 72 - S -
Further ranges on request
– Volume flow rate:
Measuring turbine RE 4 (ISDS)
(Inductive sensor with amplifier)
Output signal (rectangular)
Range
1,0 to 10 I/min
Range
2,0 to 75 I/min
Range
9,0 to 300 I/min
Range
16,0 to 600 I/min
All measuring turbines with MINIMESS and p/T-coupling (series 1620)
(For further technical information see our separate brochure volume throughput sensors)
– Testing device loading valve (ISDS)
Allows for example load checks for pumps (hydraulic load simulations)
Loading valve
Range 12 to 600 l/min (with fixing clamps)
– Volume flow rate:
Gear-wheel sensor type GFM (ISDS)
Output signal (square wave)
Range
0,005 to 1 I/min
Range
0,05 to 5 I/min
Range
0,2 to 30 I/min
Range
0,7 to 70 I/min
Range
3,0 to 300 I/min
All sensors with MINIMESS and p/T-coupling (series 1620)
(For further technial information see our separate brochure volume throughput sensors)
– Temperature
Range
-50 to +200 °C
Temperature probe Pt 100 (ISDS) (screw-in)
Output signal 0 to 20 mA for p/T-measuring coupling series 1620 (code 04)
35.00
35.00
35.00
35.00
31VB - 72 - 35 . 00S2
3143 3143 3143 3143 3143 -
01 - S 02 - S 03 - S 04 - S 05 - S -
35.00
35.00
35.00
35.00
35.00
3973 - 04 - S - 01.00
– Measuring cable MKS (length 2,5 m)
8824 - S1 - 02 . 50
– Measuring cable AKS to connect sensors to the following devices without ISDS:
Series 8000, 5000, 4010, 4020, 3000, 2040, 2045 and 2050.
(ISDS-recognition is not possible with these devices)
8824 - S2 - 02 . 50
9
Sensors (standard without ISDS, )
Order-number
-1 to
0 to
0 to
0 to
0 to
0 to
+ 6 bar
60 bar
200 bar
400 bar
600 bar
1000 bar
3403 - 32 - C3.37
3403 - 21 - C3.37
3403 - 10 - C3.37
3403 - 15 - C3.37
3403 - 18 - C3.37
3403 - 29 - C3.37
– Pressure
Pressure sensor type HT-PD
(Output signal: 4 to 20 mA)
Range
Range
Range
Range
Range
Range
– Temperature probe (screw-in)
Pt 100 (two wire technology)
Range -50 bis +200 °C
3969 - 04 - 01.00
Range -50 to +200 °C
3170 - 01 - 03.00
Range -50 to +200 °C
3170 - 02 - 06.00
Range
Range
0 to 60 bar / Range -50 bis +200 °C
0 to 600 bar / Range -50 bis +200 °C
3163 - 04 - 34.00
3163 - 03 - 34.00
Range
Range
Range
7,5 to 75 I/min
15,0 to 300 I/min
25,0 to 600 I/min
31V7 - 21 - 35.00
31V7 - 30 - 35.00
31V7 - 40 - 35.00
output signal 4 to 20 mA
for p/T couplings
series 1620 (code 4)
– Surface temperature gauge
Pt 100 (two wire technology)
output signal 4 to 20 mA incl.
spiral cable 1,2 m
– Temperature immersion sensor
Pt 100 two wire technology)
output signal 4 to 20 mA incl.
spiral cable 1,2 m
– Pressure / Temperature
p/T-dual sensor
(separate output signal:
2 x 4 to 20mA) for simultaneous
measuring of temperature and pressure
Both for p/T measuirng couplings, series 1620 (code 04)
– Volume flow rate:
Measuring turbine RE 3
(Inductive with amplifier)
Output signal (square wave)
– Measuring turbine RE 4
(Inductive with amplifier)
Output signal (square wave)
Range
1,0 to 10 I/min
7,5 to 75 I/min
Range
15,0 to 300 I/min
Range
Range
25,0 to 600 I/min
All measuring turbines with MINIMESS and p/T-coupling (series 1620)
(For further technical information see our separate brochure volume flow rate sensors)
– Volume flow rate:
Gear-wheel sensor type GFM
Output signal (square wave)
Range
0,005 to 1 I/min
Range
0,05 to 5 I/min
Range
0,2 to 30 I/min
Range
0,7 to 70 I/min
Range
3,0 to 300 I/min
All sensors with MINIMESS and p/T-couplings (series 1620)
(For further technical information see our separate brochure volume flow rate sensors)
– RPM infrared sensor type DS 03:
incl. 25 reflection foils
– Inductive sensor with amplifier
(measuring RPM at gear wheels)
– Reflection foil (replacement 50 pieces)
– Magnetic holder for RPM sensor DS 03
10
31V7 - 01 - 35.00
31V7 - 70 - 35.00
31V7 - 71 - 35.00
31V7 - 72 - 35.00
3143 - 01 - 35.00
3143 - 02 - 35.00
3143 - 03 - 35.00
3143 - 04 - 35.00
3143 - 05 - 35.00
Range
1 to 9999 min -1
3130 - 02 - 01.00
Range
1 to 9999 min -1
3107 - 00 - 09.00
8840 - 02 - 01.01
3130 - 03 - 01.00
Accessories
Order -number
– Split cable for dual sensor (length 2,5 m)
to connect to p/T dual sensors
– Car adapter (length 5,0 m) for external power supply
– Trigger cable for external control or storage activation (length 5,0 m)
– Connecting cable (parallel connection of two measuring devices, only Multi-System 5050)
8824 - D6 - 02.50
– Carrying case (plastic box)
– Carrying case I
– Carrying case II (with add. compartment for measuring turbines)
3160 - 00 - 62.04
3160 - 00 - 62.02
3160 - 00 - 62.03
– Battery powered ink jet colour printer with mains adapter and ink cartridges
(100 to 240 VAC-50/60Hz)
– Replacement ink cartridge black
– Replacement ink cartridge colour
– Data transfer cable Centronics
36-pins/25-pins
8865 - 01 - 14.00
– Direct connection for pressure sensor type HT-PD – straight (series 1620 - M 16x2)
– Direct connection for pressure sensor type HT-PD – 90° angle (series 1620 - M 16x2)
– p/T-measuring coupling 1620 (code 04) screw-in type M 10x1
– p/T-measuring coupling 1620 (code 04) screw-in type ISO 228-G1/4
2103
2146
2149
2149
– Voltage measuring (external adapter) with output signal 0 to 20 mA
Range 0 to ±48 VDC
– Current measuring (external adapter) with output signal 0 to 20 mA
Range 0 to ±2 ADC
3160 - 00 - 00.22
– Data transfer cable RS 232 9-pins/ 25-pins
– Data transfer cable USB
(length 1,5 m)
8824 - 44 - 02.00
8824 - F4 - 01.50
8824 - 64 - 05.00
8824 - D8 - 05.00
8824 - F2 - 00.50
8865 - 01 - 09.02
8865 - 01 - 10.02
8824 - 36 - 02.00
-
07 - 18.62
13 - 05.00
04 - 19.13
04 - 15.13
3160 - 00 - 00.23
– Support software “HYDROcomsys/WIN32” for the display and the analysis of
measurements at the PC.
(Supplied with all hand held measuring devices with RS232 interface).
Test and logging instruments
Input
PC/Printer
8000
Memorycard
Multi Control
Interface
Power
Limburg
p1 =
p2 =
128.6
117.8
bar
bar
Multi Handy 2040
ON
Limburg
Min.
0-20
!
"!# $ # %% %& ' (!# %) *$ !# + ! ) '
Max.
Chn.1
Chn.2
Rel.1
4-20
Rel.2
OFF
SI
Prog./Displ.
US
p1
n
Prog.
Chn.1
Max.
Peak
Chn.2
Limburg
Channel
compare
analog
Rel.1
p
(p1-p2)
Q
Min.
p2
p
128.6
p1 =
[bar]
T
Rel.2
Prog./Displ.
Prog.
Peak
Channel
Multi Handy 2045
Prog
ENT
0-20
4-20
SET
1
OFF
n
p1
T
Q
Scale
max.
min.
ALARM
p
(p1-p2)
Limburg
CAL
2
Analog
p2
p
Test with confidence
compare
digital
Limburg
ON
SET
1
2
3
4
SEG
1050
Memory
Scan
Printer
Prog
Start
Stop
ENT
Limburg
Messen mit System
Test with confidence
8000 instrument – 12 channel powerful data logging
with touch screen control.
The 8000 series instruments has been developed to
meet the needs of more sophisticated levels of
monitoring in Hydraulic and Engine testing
environments.
Limburg
Messen mit System
Test with confidence
Hand held measuring instruments of series 2040
and 2045 for daily checks and control.
Perfect for the Service and Plant Engineer.
Limburg
Messen mit Syste
Panel mounted instrument for monitoring, measuring
and controlling purposes.
11
Test with confidence
Limburg
12
Messen mit System
HYDROTECHNIK GmbH • Holzheimer Straße 94-96 • D-65549 Limburg • Tel. ++49 (0)6431/4004-0 • Fax 45308
Internet: http://www.hydrotechnik.com • e-Mail: info@hydrotechnik.com
07/02 - 8898-01-00.42