CORDLESS DECT PHONE
P0305019-CT7010-IM02
INSTRUCTION MANUAL
d
e
f
a
b
c
g
h
i
p
q
r
s
m
n
o
j
k
l
w
x
y
z
t
u
v
P
GB
1
INTRODUCTION / BEFORE USE
2. MAIN DIAGRAMS
1. PARTS AND ACCESSORIES
After unpacking the unit, please make sure the below parts are present:
– DECT phone base set.
– Handset; number of pieces depending on your purchased item.
– Line Cord.
– 6VDC power supply adaptor with cord.
– Instruction manual.
– Rechargeable batteries AAA, NiMh 600mAh; number of pieces depending on your purchased item.
– Wall mounting kit
– Any other accessories depending on your purchased item.
g
h
i
p
q
r
s
a
b
c
d
e
f
j
k
l
m
n
o
t
u
v
w
x
y
z
P
14
15
Description
1.
2.
3.
4.
5.
6.
7.
8.
3
Introduction Before Use
LCD display
Talk key to pick up and hang up the phone
Earpiece
Microphone
Battery compartment
Handset charge contacts
Belt Clip
Base charge holder
9. Base charge contacts
10. Page / Subscription key to call a handset
and to subscribe a handset to a base set
11. Line / Charge indicator
12. AC adaptor jack
13. Line cord jack
14. Charger Unit
15. Desk top supporting plastic
Introduction Before Use
4
INSTRUCTION FOR USERS
1. INSTALLATION
Congratulation on your purchase of this DESIGNER'S PHONE. This phone is designed with finishing
touch by renowned Scandinavian designer. It is a state of art device created with consideration of form
and function.
This DECT phone could only work under constant main power supply. It is advisable that another corded
phone (works without main power supply) is connected to your phone system for emergency call purpose
in case of power failure.
This designer's phone is powered with latest digital technology- DECT system (Digitally Enhanced
Cordless Telecommunication). It brings you digital sound, penetrating range and user-friendly
menu-driven functions.
1. On the base unit, connect one end of the line cord to the jack provided Symbol of Telephone mark
on the base unit, and connect the other end to the wall outlet for telephone.
According to the DECT system standard (GAP compatible), 5 different handsets (sold separately) can
be registered to a single base unit to perform function of a mini-PABX system which offers you functions
of intercom and call transfer between handsets.
In addition, its built-in caller ID decoder, pre-dial function, phone book, redial list and caller ID memory
provide you great convenience to manage your phone calls.
This Instruction for Users briefly describes the installation procedures and all built-in features at a glance.
2. On the base unit, insert the power connector of the adapter to the jack provided Symbol of adapter
mark on the base unit, and connect the adapter plug to the main wall outlet.
3. On the handset, remove the battery compartment cover, and install batteries in the battery
compartment, then replace battery compartment cover.
4. Put the handset onto the charge cradle. make sure charge indicator Symbol of Charge on the base
unit lights up to show charging in progress.
5. Please refer to appendix A for desktop installation and appendix B for wall mount installation.
To Tel Line
Wall Outler
IMPORTANT NOTICE
To obtain best battery performance, keep the handset being charged for 15 hours after first time installation.
Optional Product Package
Depending on product package (refer to information on packaging), additional handsets with stand alone
charging units may be included in package.
Simply insert battery pack to the additional handset as described above, and connect power adapter
of standalone charging unit to the wall outlet. Then you may put additional handset onto standalone
charging unit for initial 15 hours recommended charging.
5
Instruction for Users
Instruction for Users
6
2. CHARGE INDICATION
4. BUTTONS & THEIR FUNCTIONS
100% charged
50% charged
+ warning tones: Weak battery
All buttons should be presented in graphics according to final key panel silk screening
Out of Range
1. When the handset gets too far away from the base set, the handset emits a warning tone.
“
” is displayed and the icon
flashes.
2. Go nearer to the base set.
3. When you hear a tone and the icon
lights permanently contact is restored.
Button
Function
Push this button to answer an incoming call or to make a call;
another push on this button to end a call.
To enter digit 0-9
To enter
3. LCD DISPLAY
and
This button functions as "last number redial" when making a call
(25 digits maximum). CalIed number longer than 25 digits will not
be kept in redial memory. Last 5 called numbers will be kept in the
redial memory. To recall the dialed list, push the REDIAL button
and use the UP/Down Arrows to select desired number. This button
functions as "pause" when programming a telephone number into
a phone book memory bank.
Symbol
Description
Message waiting indication
Flashing : New message
On: Old message
Off: No message
Phone book active
Menu active
Battery capacity indication
Ringer off indication
On: In talk & answering mode
Flash: incoming call ringing
Microphone mute
Caller ID
Flashing : new unread call
On: call log
Off: no call log
Speakerphone active (optional depending on your ordered version)
On: In range
Flash: Search /Out of range
7
Instruction for Users
This button functions as flash or recall to switch between 2 lines
This button functions as down arrow for scrolling down when entered
into menu mode.
This button functions as caller ID review button to show caller ID
records in memory. This button functions as up arrow for scrolling
up when entered into menu mode. This button also functions as
loudspeaker switch for optional loudspeaker product (refer to
information on product package)
Push this button to enter menu mode. When entered into menu
mode, this button also functions as OK/confirm.
This button functions as microphone mute during conversation.
Press this button once and your voice will not pass through the
microphone. To resume, press the same button again. This button
also functions as cancel / escape when entered into menu
programming mode.
Push this button to review phone book memories.
Push this button during conversation to adjust receiver/ear piece
volume from 1 to 5. Push this button followed by numeric button 1
to 5 to set desired volume level. This button also functions as ringer
selection switch in standby mode.
Instruction for Users
8
SECTION A
9
FEATURE LIST & PRODUCT SPECIFICATION
SECTION B
PHONE OPERATION
Handset
Caller ID features
1. Dialing a Number
• DECT, GAP.
• 20 keys.
• LCD display with 3 lines (10 characters,
12 digits, icons).
• Phone book for 20 entries (10 characters
+ 25 digits).
• Redial memory of 5 last numbers dialed
(max. 25 digits each).
• Ring volume: 10 levels (0 for no ring).
• 9 melodies Selection.
• Earpiece volume control: 5 levels.
• Dial preparation with edit function.
• Phone book review during conversation.
• Chain dialing.
• Call timer.
• Extemal call priority.
• Key lock.
• Auto Standby.
• Flash recall: User programmable short / long.
• Pause.
• Mute (with indication).
• Out of range auto on-hook.
• Out of range warning: Audible beep and
visual indication (both in talk and standby
mode).
• Battery low warning: Audible beep and visual indication (both in talk and standby
mode).
• Battery low indication: 3 battery levels.
• Power save mode.
• Multi handset features.
• Internal / External call indication.
• Call transfer (Ext to H/S).
• 3 parties conference: 1 external + 2 Internal.
• Hands-free speaker.
• Battery type : 600 mAh x AAA NiMH.
• Headset jack connection (optional).
• LCD backlight.
• ClD type 1 FSK/DTMF auto detect.
• Support name and numbers (for FSK CID
only).
• Phone book matching.
• Date time stamping (for FSK CID only).
• New message indication.
• Unread message protect.
• Caller log of 30 numbers (10 characters +
25 digits).
• Call records review.
• Call back callers.
• Store callers number in phone book.
• Delete selected record.
• Delete all records.
1.1
-
Dial without dial preparation
Press the
key.
The line/charge indicator flashes, symbol
Key in the phone number.
Press the
key to end the call.
1.2
-
Dial with dial preparation
Key in the phone number. Use the
key to delete wrong entries.
Press the
key and the number is dailed out.
The line/charge indicator flashes and the symbol
and EXT are displayed.
Press the
key to end the call.
SECTION A Feature list & Product Specification
Base feature
• Page key (base to all handset).
• Status indicator (Charge, On line. Off line,
Registration)
• Tone / pulse dialing.
Product Specification
•
•
•
•
•
•
•
•
Outdoor range 300 meters.
GAP compatible.
Multiple handset - up to 5 handsets.
Multiple bases - up to 4 bases.
Standby time: 4 days.
Talk time: 6 hours.
Recharging time: 14 hours.
Rechargeable batteries AAA, NiMH 600mAh.
and EXT are displayed.
2. Last Number Redial
2.1 Redial without
- Press the
- Press the
automatically.
- Press the
2.2
-
dial preparation
key.
key and the last number dialed is display. The number is dialed out
key to end the call.
Redial with dial preparation
Press the
key and the last number dialed is display.
Use the arrow keys to scroll through the list and find the desired number.
Press the
key to dial out the number.
Press the
key to end the call.
3. Answering Calls
- When there is an incoming call the telephone rings and the symbol
flashes.
- Press the
key to answer the call. EXT will be displayed if it is an external call while
INT will be displayed if it is an internal call.
- Press the
key to end the call.
4. Calling the Handsets From the Base Set
This feature enables you to call all handsets subscribed to the base set.
1. The handsets are in standby mode (no tone).
2. You cannot find your handset.
3. Shortly press the
key.
4. All handsets subscribed to this base set will start ringing.
5. To stop the handset from ringing, shortly press the
key.
SECTION B Phone Operation
10
5. Audio Control
5.1 Mute
The function enabIes you to disconnect the microphone of the handset to prevent the other
party from hearing you.
- During a telephone conversation press the
key to switch off the microphone.
- The symbol
is displayed.
- Press the
key to switch on the microphone.
The symbol will disappear.
5.2
-
Adjust earpiece volume
During a call, press the
key to enter volume set mode.
Press 1-5 (1-lowest. 5-highest) to select earpiece volume.
Press the
key to confirm the volume setting.
5.3 Adjust ringer volume
In standby mode, press the
key to directly jump to Ringer select menu. Please refer to
SECTION E point 6 for more details.
11. Headset Connection (Optional)
Depending on your purchased package, some package will come with the headset connection
function.
You can connect a headset with a 3 pole jack plug of 2.5 mm on the right side of the handset.
When the headset jack is connected, you can only hear and talk through the headset. The
headset microphone can still be muted by the
key. The handsfree speaker can still be
activated by pressing the
key.
6. Flash
- During external call, press the
key to make a line flash.
- The icon
will be off for 0.5 second.
7. Handsfree
- In talk mode, press the
key to enable or disable the speaker. The icon
to indicate that the handset is in speaker phone mode,
- A new call will start with the speaker phone in off mode.
10. Conference Call (3-Party Call)
If you have more than one handset to your DECT phone you can hold a three party
conference:
- During an external call press the
key.
- “
” is displayed.
- Press the program
key.
- The external calling partner is put on hoId.
- INT is displayed.
- Press one of the
keys to select the handset you want to make a conference with.
- As soon as the internal calling partner answers the call, the clock timer will start.
- Press the
key for 3 seconds.
- “
” is displayed.
- The three party conference is established.
will be on
8. Internal Call
- Press the
key and INTERCOM is displayed.
- Press the
key and INT- is displayed.
- Enter the handset number
to select the handset you want to call.
- If the call is made successfully, the clock timer starts. If the handset being called is busy, there
will be an error tone and the handset will automatically go back to standby mode.
- Press the
key to end the call.
9. Call Transfer
- Press the
key during the telephone conversation, “
” is displayed.
- Press the
key and INT- is displayed.
- Enter the number
of the handset you want to transfer the call to.
- If the call is made successfully and answered by the other handset, press the
key to
end the external call. The call will then be transferred to another handset.
- lf the call is not answered by the other handset, press the
key to take back the external
call.
* If there are more than 1 handset comes with your product package, or you have registered any
additional handsets to your base unit (refer to SECTION F ADVANCED OPERATION).
Internal communication like internal call, call transfer, conference call can be made.
11
SECTION B Phone Operation
SECTION B Phone Operation
12
SECTION C
SECTION D
PHONE BOOK OPERATION
1. Storing a Number in the phone book
A phone book entry consists of a number and a name.
- Input the number in standby mode.
- Press the
key.
- Input the name by using the numeric key
.
- Press the
key to edit the name.
- Press the
key.
- The handset emits a long tone and the name & number are stored in the phone book memory.
- The handset emits 3 beeps when the memory is full.
Notes:
- The name is mandatory. It is not possible to store a telephone number without a name.
- Phone book memory will be sorted by name.
- When inputing a name like for instance "ANN" with a double "N", a 1 sec.delay is necessary before
the second "N" can be input.
The characters in the table below can be used in names for phone book entries. These are also the
characters that can be used as search characters for phone book search.
The letters and characters in the table below are found by pressing
CALLER ID OPERATION
If the CID service is available from your network provider and you subscribe to it, the number
of the caller will be shown on the display when there is a call. If you use FSK system, the name of
the caller will also be displayed as well as the date and time of the call.
Note :
If the call is from abroad the display will show “
” and if the call is private (restricted) the
display will show “
” instead of the telephone number.
1.Viewing the CID
If there are unread calls the icon
will be flashing.
- In standby mode, press the
key to view the CID list. The last call will be shown first.
- Press the
key to see previous records.
- Press the
key to see the number of the caller (in FSK only or if there is a phone book match).
2. Calling a Number from the CID Memory
- In standby mode, press the
key to view the CID records.
- Press the
&
key to select the number from the CID records you want to call.
- Press the
key to dial the number.
.
3. Storing a Number from ClD Memory
- In standby mode, press the
key to view the CID records.
- Press the
&
key to select the number from the CID memory you want to store into the
phone book.
- Press the
key twice.
- The number is stored and the handset returns to CID review mode.
Note :
Go to SECTION E, P 5.2 to see how to store the name.
4. Deleting a Number in the CID Memory
2. Retrieving a Number from the phone book
- Press the
key in standby mode.
- Press the
&
key to select the number.
- Press the
key to dial the number.
3. Deleting a phone book Entry
- Press the
key in standby mode.
- Press the
&
key to select memory.
- Press the
key to delete the memory.
- Press the
key to confirm.
4.1 Deleting single record
- In standby mode, press the
key to start viewing the CID memory.
- Press the
&
key to select the number you want to delele.
- Press the
key.
- Press the
key to confirm deletion.
- The number is deleted and the handset returns to ClD review mode.
4.2 Deleting all records
- In standby mode, press the
key to start viewing the CID memory.
- Press and hold the
key until “
” is displayed.
- Press the
key to confirm deletion.
- The number are deleted and the handset returns to standby mode.
Please refer to SECTION E point 5 for more advanced usage.
13
SECTION C Phone Book Operation
SECTION D Caller ID Operation
14
SECTION E
MENU OPERATION
1. MENU STRUCTION
In standby mode
2. General Menu Operation
- Press the
key to enter menu operation or to confirm your selection.
- Press the
&
key to scroll through the rnenu level 1.
- Press the
key to enter next level if it is available.
- Press the
key to go back.
3. Power Off
- Press the
key.
- Press the
or
key until “
” is displayed.
- Press the
key to confirm.
- Handset is switched off now.
- You can turn on the handset by pressing any key on the handset.
4. Key Set Up
4.1 Key lock
- Press the
- Press the
- Press the
- Press the
- Press the
- Press the
- Press the
key.
key until “
” is displayed.
key to enter level 2.
key until “
” is displayed.
key to enter level 3.
or
key to select between KEY LOCK or KEY UNLOCK.
key to confirm.
4.2 Key Click
- Press the
- Press the
- Press the
- Press the
- Press the
- Press the
- Press the
key.
key until “
” is displayed.
to enter level 2.
key until “
” is displayed.
key to enter level 3.
or
key to select between CLICK ON or CLICK OFF.
key to confirm.
5. Phone book
In Talk mode
15
SECTION E Menu Operation
5.1 Search
- Press the
key.
- Press the
key until “
” is displayed.
- Press the
to key enter level 2.
- Press the
until “
” is displayed.
- Press the
key to confirm.
- Enter the first character of the name. Please refer to the table in SECTION C.
- Press the
key and the nearest entry will be displayed.
- Use the arrow keys to find the desired name.
- Press the
key to dial the number or press the
key to exit to search mode.
SECTION E Menu Operation
16
7. Direct Call
By setting a Direct Call number, the phone will automatically take the line and dial out this number.
This function is useful to use the phone as emergency phone.
5.2
-
Add New
Press the
key.
Press the
key until “
” is displayed.
Press the
key to enter level 2.
Press the
key until “
” is displayed.
Press the
key lo confirm.
Enter name, please refer to SECTION C for how to enter the characters.
Press the
key.
Enter the number.
Press the
key to confirm and go back to ADD NEW menu.
5.3
-
Edit
Press the
key.
Press the
key until “
” is displayed.
Press the
key to enter level 2.
Press the
key until “
” is displayed.
Press the
key to confirm.
Press the
or
key to select the number.
Press the
key to confirm.
Edit the name and press the
key to confirm.
Edit the number and press the
key to confirm.
The handset is still in EDIT mode and you can now edit the the next record or go to the next
step in the menu.
5.4
-
Delete
Press the
key.
Press the
key until “
” is displayed.
Press the
key to enter level 2.
Press the
key until “
” is displayed
Press the
key to confirm.
Press the
or
key to select the number.
Press the
key to delete the number.
Press the
key to confirm,
The selected number is deleted.
6. Ringer Select
- Press the
key.
- Press the
key until “
” is displayed.
- Press the
key to enter level 2.
- Press the
key to select between EXTERNAL and INTERNAL.
- Press the
key to enter level 3.
- Press the
or
key to select between MELODIES and VOLUME.
- Press the
key to confirm.
- Press numeric
key to hear the melody / volume level and press the
confirm the choice.
7.1 To program the Direct Call number
- Press the
key
- Press the
key until “
” is displayed
- Press the
key
- If necessary, delete the existing number by pressing the
- Enter the direct call telephone number
- Press the
key
SECTION E Menu Operation
7.2 Turn the Direct Call function ON
- Press the
key
- Press the
key until “
” is displayed
- Press and hold the
key for few seconds
- “
” is displayed
7.3 Turn the Direct Call function OFF
- Quickly press the
key twice
8. System Setting
8.1 Set Date / Time
- Press the
key
- Press the
key until “
” is disptayed
- Press the
key to enter into level 2
- Press the
key until “
/
” is displayed
- Press the
key to confirm
- YEAR is displayed and press the numberic keys to enter which year is
- Press the
key to confirm
- MONTH is displayed and press the numberic keys to enter which month is
- Press the
key to confirm
- DAY is displayed and press the numberic keys to enter which day is
- Press the
key to confirm
- HOUR is displayed and press the numberic keys to enter what time it is
- Press the
key to confirm
- MINUTE is displayed and press the numberic keys to enter what time it is
- Press the
key to confirm
key to
Note:
There are 9 selection of melodies and 10 levels of volume. 0 volume means ringer off.
17
key
8.2 Set language
- Press the
- Press the
- Press the
- Press the
- Press the
- Press the
- Press the
key
until “
” is displayed
key to enter level 2
until “
” is displayed
key to enter level 3
or
key to select language
key to confirm
SECTION E Menu Operation
18
8.3 Base Selection
- Press the
key.
- Press the
until “
” is displayed.
- Press the
key to enter level 2.
- Press the
until “
” is displayed.
- Press the
key to enter into level 3.
- Press the
or
key to select between AUTO and MANUAL. Then, press the
confirm.
AUTO MODE
- BASE 1 will be displayed.
- The icon
flashes. After searching is completed, the icon
to standby mode.
key to
stops flashing and the handset returns
MANUAL MODE
- Enter base number and press the
key to confirm.
- The icon
flashes. After searching is completed, the icon
stops flashing and the handset
returns to standby mode.
- If searching is not successful, NOT SUB X is displayed and the handset will return to the first base.
8.4 Remove handset
- Press the
key.
- Press the
until “
” is displayed.
- Press the
key to enter into level 2.
- Press the
until “
” is displayed.
- Press the
key to confirm.
- Enter PIN code and press the
key to confirm (default PIN code setting - 0000).
- Enter handset number to be removed and press the
key to confirm.
8.5 Recall mode
- Press the
- Press the
- Press the
- Press the
- Press the
- Press the
- Press the
key.
until “
” is displayed.
key to enter level 2.
until “
” is displayed.
key to enter level 3.
or
key to select between SHORT and LONG.
key to confirm.
8.6 Call barring
This feature is only accessible with the PIN code (0000). It enables you to bar outgoing calls of 5
groups of numbers consisting of maximum 5 digits each.
-
19
In standby mode, press the
key.
Press the
until “
” is displayed.
Press the
key to enter level 2.
Press the
until “
” is displayed.
Press the
key to confirm.
Enter the PlN code number and press the
key.
SECTION E Menu Operation
Press the
key or
key to select “
” .
Enter number to be barred.
Press the
key confirm.
Enter the handset number to which the number should be barred.
Press the
key to confirm.
Note:
Some emergency number (999, 15, 18) can not be barred by any handset in all condition.
8.7 PlN code
- Press the
key.
- Press the
key until “
” is displayed.
- Press the
key to enter level 2.
- Press the
until “
” is displayed.
- Press the
key to confirm.
- “
” is displayed.
- Enter old (default is 0000) PIN code and press the
key.
- “
” is displayed.
- Enter new PIN code and press the
key.
- “
” is displayed
- Enter new PIN code again and press the
key.
8.8 Dial mode
- Press the
- Press the
- Press the
- Press the
- Press the
Press the
- Press the
key.
key until “
” is displayed.
key to enter level 2.
key until “
” is displayed.
key enter level 3.
or
key to select between TONE and PULSE.
key to confirm.
Note:
Do not forget the new pincode. If it is lost it can only be retreived at the service center.
8.9 Reset
- Press the
key.
- Press the
or
key until “
- Press the
key to enter level 2.
- Press the
or
key until “
- “
” is displayed.
- Press the
key to confirm.
- Enter PIN code and press the
key.
” is displayed.
” is displayed.
Note:
All system parametres will be reset to default settings. Phone book memory and registration information
will be kept.
SECTION E Menu Operation
20
9. Base Subscription
It is possible to subscribe more than one handset to the same base. Do as follows:
- Press and hold
for 10 seconds until the line / charge indicator starts flashing quickly.
- Now, the base set is in subscribing mode. All following operations must be performed while the
line / charge indicator is flashing quickly.
- Press the
key.
- Press the
key until “
” is displayed.
- Press the
key.
- “
” is displayed.
- Enter the number
which will be assigned to this base set by pressing the numberic
keys.
- “
” is displayed and the antenna symbol
is flashing.
- “
” is displayed and the handset emits a tone when it recognises the base.
- Press the
key.
- “
” is displayed.
- Enter the PIN code of this base. (default PIN code 0000)
- Press the
key.
- The handset is now subscribed to this base.
SECTION F
ADVANCED OPERATION
Special Attention!!!
Following sections are only for users who are familiar with electronics products. Failure in following
steps correctly may stop your DECT phone from normal operation.
According to the DECT system standard (GAP compatible), a base unit can be registered to work with
multiple numbers of handsets, and a handset unit can also be registered to work with multiple numbers
of base units. While maximum numbers of handset and base unit matrix is designed by individual makers.
In principle, your DECT phone (base unit and handset) work with any makes of digital cordless phone
in DECT system (GAP compatible). However, it is only advised to register handsets to unit base from
the same marker to achieve complete functions offered by the maker.
The electronics of this DECT phone systerm works with maximurn 5 handsets and 4 bases from the
same maker. This could perform function of a mini-PABX system to offer you functions of intercom,
call transfer and conference call between handsets.
The following sections will show you steps in setting up your DECT phone with advanced multi-handset
and multi-base operation.
1. PIN (PERSONAL IDENTIFICATION NUMBER)
There is a PIN protection in settings of advanced operations, like call barring, registration of new
handset and subscribe to a new base unit.
Factory default PIN is 0000.
You may change your PIN in the following steps:- Press the
key.
- Press the
key until “
” is displayed.
- Press the
key to enter level 2.
- Press the
key until “
” is displayed.
- Press the
key to confirm.
- “
” is displayed.
- Enter old (default is 0000) PIN code and press the
key.
- “
” is displayed.
- Enter new PIN code and press the
key.
- “
” is displayed.
- Enter new PIN code again and press the
key.
Special Attention!!!
You must keep a good memory or record of your new PlN. As the only way to unlock a forgotten PIN is
to order after-sales repair service, it could be expensive.
21
SECTION E Menu Operation
SECTION F Advanced Operation
22
2. HOW TO REGISTER ADDITIONAL HANDSET TO A BASE UNIT
Depending on product package, some package will come with more than 1 handset. If more than 1
handset is packaged inside the same box, all handsets are usually registered to the base unit at the
factory. There should not be any registration work at part of consumer.
If additional handset is purchased separately or at a later stage, handset registration (base subscription)
can be done by going through the following procedures:-
p
q
r
s
a
b
c
d
e
f
a
b
c
g
h
i
m
n
o
j
k
l
w
x
y
z
t
u
v
P
g
h
i
d
e
f
j
k
l
p
q
r
s
t
u
v
m
n
o
w
x
y
z
P
On the handset - Now, the base set is in subscribing mode. All following operations must be performed while
the line / charge indicator is flashing quickly.
- Press the
key.
- Press the
key until “
” is displayed.
- Press the
key.
- “
” is displayed.
- Enter the number
which will be assigned to this base set by pressing the numberic
keys.
- “
” is displayed and the antenna symbol
is flashing.
- “
” is displayed and the handset emits a tone when it recognises the base.
- Press the
key.
- “
” is displayed.
- Enter the PIN code of this base.
- Press the
key.
Repeat the above procedures to register another additional handset to the base unit if any. Please
take note that each base unit can register up to maximum 5 handsets only. The base unit will reject
subscription if there have been already 5 handsets registered with the base unit. You may remove
any unused handset from the base unit to move room for new handsets.
3. HOW TO REMOVE HANDSET FROM A BASE UNIT
Preparation for Registration / Subscription Procedures
Make sure the additional handset is installed with good battery pack.
Before you proceed to the next registration procedures, you must make sure the PIN code of the base
station is ready. Basically, PIN code of base unit can be changed by user. If you have changed the PIN
code yourself, you must make this PIN code ready.
Registration procedures
On the base unit Bring the base unit into registration mode. Press and hold the page button
10 seconds until the in-use/charge indicator starts flashing quickly.
of the base unit for
Note:
The base unit will remain in registration mode for 2 minutes. You must complete the rest procedures
before the base unit quit from registration mode. If you fail to complete registration in time, the
indicator of the base unit will stop flashing and you must restart the whole procedures again.
23
SECTION F Advanced Operation
This DECT phone is gap compatible of which the base can connect more than one handset. You can
connect up to 5 handsets to this base staiion and please follow the procedures as stated in "Base
Subscription" section.
If you have connected 2 handsets or more for the same base station, you can remove the handset by
the followings steps:
1. In standby mode, push
to enter into Menu Programming mode.
2. Use
buttons to start browsing until “
” is shown.
3. Push
again to enter into SETTING menu.
4. Use
buttons to start browsing until “
” is shown.
5. Push
button to confirm.
6. You will be asked to enter your PIN (Default PIN is 0000 if you have not changed the PIN)
7. Enter PIN and push
to confirm
8. Enter desired handset number to be removed. (from HS-1 to HS-5)
9. Push
button to confirm.
Note:
If only one handset is connecting to the base station, you cannot remove this handset, as it is the
only left handset controlling the base station.
SECTION F Advanced Operation
24
4. HOW TO SUBSCRIBE TO AN ADDITIONAL BASE UNIT
A single handset can work with more than 1 base unit. This could be useful if more than 1 telephone
line and telephone number is connected to your house or office. Then 1 single handset can operate
different telephone lines by selecting and switching between different base units.
Usually, standard product package will not include more than 1 base unit. ln case you have another
set of DECT phone (GAP compatible) installed in your house or office, you may go through the following
steps to subscribe the handset of this DECT phone to your other base units.
d
e
f
a
b
c
g
h
i
p
q
r
s
m
n
o
j
k
l
w
x
y
z
t
u
v
P
Preparation for Base Unit Subscription Procedures
Before you proceed to the next subscription procedures, you must make the following information handy.
i. Make sure the base unit you intend to register is DECT system and GAP compatible.
ii. lnformation shows how to bring the base unit into registration mode. Usually, this information can be
found in the instruction manual comes with the base unit.
iii. The PIN code of the base station. Basically, PlN code of base unit can be changed by user. If
you have changed the PIN code yourself, you must make this PIN code ready. If you have not
changed the PIN code yourseIf, you may consult the instruction manual comes with your base unit
to find out the default PIN code.
Registration Procedures
On the base unit 1. Bring the base unit into registration mode. Please consult instruction manual comes from the base
unit.
If the base unit you intend to register is from the same marker of this handset unit Press and hold the page button
of the base unit for 10 seconds until the line / charge indicator
starts flashing quickly.
On the handset - Now, the base set is in subscribing mode. All following operations must be performed while
the line / charge indicator is flashing quickly.
- Press the
key.
- Press the
key until “
” is displayed.
- Press the
key.
- “
” is displayed.
- Enter the number
which will be assigned to this base set by pressing the numberic
keys.
- “
” is displayed and the antenna symbol
is flashing.
- “
” is displayed and the handset emits a tone when it recognises the base.
- Press the
key.
- “
” is displayed.
- Enter the PIN code of this base.
- Press the
key.
Note:
Subscription of a new base unit will automatically replace any previous base unit setting in the same
reference number memory bank. If you do not intend to replace and overwrite any existing base unit
setting, always register a new base unit at a free reference number memory bank in your handset
(each handset can work with rnaximum 4 base units).
5. HOW TO CHARGE / SWITCH BASE UNIT FROM THE HANDSET
If your handset has subscribed to more than 1 base unit, you may switch among base stations
(to switch among different telephone lines)
1. In standby mode, push
to enter into menu programming mode.
2. Use
buttons to start browsing until “
” is shown.
3. Push
to confirm.
4. Use
buttons to start browsing until “
” is shown.
5. Push
to confirm.
6. Use
buttons to start browsing until “
” is shown.
7. Push
button and “
” should show on the screen.
8. Enter the desired base unit reference number.
9. If selected base unit is found, the handset switches to desired base unit, otherwise it quits programming
mode and returns to original base unit setting.
Note:
The base unit will remain in registration rnode for 2 minutes. You must complete the rest procedures
before the base unit quit from registration rnode. If you fail to complete registration in time, the indicator
of the base unit will stop flashing and you must restart the whole procedures again.
25
SECTION F Advanced Operation
SECTION F Advanced Operation
26
APPENDIX A
APPENDIX B
DESKTOP INSTALLATION
d
e
f
a
b
c
g
h
i
p
q
r
d
e
f
a
b
c
m
n
o
j
k
l
g
h
i
w
x
y
z
t
u
v
WALL MOUNT INSTALLATION
s
p
q
r
s
P
m
n
o
j
k
l
w
x
y
z
t
u
v
P
a
b
c
g
h
i
p
q
r
d
e
f
m
n
o
j
k
l
w
x
y
z
t
u
v
s
P
d
e
f
a
b
c
d
e
f
a
b
c
g
h
i
p
q
r
s
m
n
o
j
k
l
w
x
y
z
t
u
v
g
h
i
p
q
r
s
m
n
o
j
k
l
w
x
y
z
t
u
v
P
P
29
APPENDIX A Desktop Installation
APPENDIX B Wall Mount Installation
30
APPENDIX C
WALL MOUNT TEMPLATE
31
APPENDIX C Wall Mount Template
35 mm
Screw position in actual size
Wall mount template