Phone: 800-733-3667
The Best Door In The Industry
Doors
Republic offers a complete line of standard and specialty
hollow metal doors to fit
your architectural needs. Republic doors are available in 2 0 , 18, 16, & 14 gauge
cold rolled and galvanealed steel. All doors come with a % " cell honeycomb core as
standard, providing every door with a smoother, flatter, and stronger door. Republic
honeycomb doors are available in a complete range of fire ratings (20 minute up to 3
hours) and are certified under both Underwriters Laboratories and Warnock
Hersey/ITS. All doors are manufactured from stretcher level quality steel and are
thoroughly cleaned and phosphatized inside and out offering excellent corrosion
resistance and paint adhesion.
Basic Door Designs
•
0
—
a
D
0
Ti
i
a
0
9
I
II
D
F
•
V
N
G
G2
G3
G4
G6
FG
•
0
so
2 Panel
4 Panel
6 Panel
NLI
GLI
D
8 Panel
LI
TLI
LU
FL
VLI
Optional Door Cores
• Polystyrene (Solid Core) - 1 lb density expanded polystyrene per ASTM 578 UFactor of .13
• Polyurethane (Solid Core) - 2 If density polyurethane per ASTM C591 U-Factor
of .10
Steel Stiffened - Vertical hat shaped stiffeners of 2 0 , 18, and 16 gauge with
mineral wool or fiberglass batting between stiffeners. Stiffeners are welded
maximum of 6" apart and on 5" centers.
Temperature Rise/Mineral Fiberboard - Mineral fiberboard capable of
withstanding a maximum of 250° temperature rise in 30 minutes. U-Factor
of .26
Republic Doors and Frames
155 Republic Drive, McKenzie, TN 38201
800-733-3667
republic@republicdoor.com
Copyright © 2006-2008 Republic Doors and Frames
Phone: 800-733-3667
The Best Door In The Industry
• frames
DM Series Full Flush Doors
Republic's DM series doors are available in 18 or 20 gauge cold
rolled steel or galvanealed (A60) steel. Republic's "McKenzie
Edge" lock edge is continuously lap seam welded and planished,
providing a near seamless appearance - SDI levels 1 and 2 Physical performance level A.
Features
• 1 A " ( 4 4 . 4 ) full flush design, rated for light to extra heavyduty use
• A" (19) cell honeycomb core 1 0 0 % bonded to skins to
provide exceptional strength and flatness
• Hinge edge is non-beveled and reinforced with a full height
16 gauge steel channel projection welded at a maximum of
5" on center with an additional 9 gauge reinforcement plate
s e r i e s Door
at each hinge location, providing more than 3/16" ( 5 ) of
total reinforcement
• 16 gauge flush top and inverted bottom channels projection welded to both
skins every 2 Vfe" on center
• Doors are prepared for 4 Vi" standard or heavy weight, full mortise template
hinges
• Non-handed design (square lock edge)
• Come standard with 1 h hour mylar Underwriters Laboratories fire label
• Doors are thoroughly cleaned, phosphatized, and primed with a coat of force
cured rust inhibiting primer that meets and/or exceeds the requirements of
ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240
hour continuous humidity test per ASTM D4585)
• Doors are individually packaged and fully plastic wrapped to prevent damage
3
3
D
x
Available Options
•
•
•
•
•
14 gauge closer reinforcement (standard option)
12 gauge closer reinforcement
A60 galvanealed steel
Finish paint (Republic standard and custom colors)
Standard cylindrical or mortised lock hardware
Republic Doors and Frames
155 Republic Drive, McKenzie, TN 38201
800-733-3667
republic@republicdoor.com
Copyright © 2006-2008 Republic Doors and Frames
M
Phone: 800-733-3667
The Best Door In The Industry
• frames
DL Series Full Flush Doors
Republic's DL series doors are available in 16, 18, and 20 gauge
cold rolled steel or galvanealed (A60) steel. Face sheets are
continuously projection welded to hinge and lock channels on 5"
centers. SDI Levels 2 and 3 - Physical performance level A.
Features
• 1 A " ( 4 4 . 4 ) full flush design, rated for light to extra heavyduty use
DL S e r i e s Door
• %" (19) cell honeycomb core 1 0 0 % bonded to skins to
provide exceptional strength and flatness
• Hinge edge is non-beveled and reinforced with a full height 16 gauge steel
channel projection welded at a maximum of 5" on center with an additional 9
gauge reinforcement plate at each hinge location, providing more than
3/16" ( 5 ) of total reinforcement
• 16 gauge flush top and inverted bottom channels projection welded to both
skins every 2Vi on center
• Lock edge is non-beveled and reinforced with a continuous 16 gauge channel,
mortised and cylindrical lock reinforcements are integral 16 gauge
reinforcements
• Doors are prepared for 4 /2 standard or heavy weight, full mortise template
hinges
• Non-handed design (square lock edge)
• Come standard with Vh hour mylar Underwriters Laboratories fire label
• Doors are thoroughly cleaned, phosphatized, and primed with a coat of force
cured rust inhibiting primer that meets and/or exceeds the requirements of
ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240
hour continuous humidity test per ASTM D4585)
• Doors are individually packaged and fully plastic wrapped to prevent damage
3
n
1
n
Available Options
•
•
•
•
•
•
•
•
14 gauge closer reinforcement (standard option)
12 gauge closer reinforcement
A60 galvanealed, G90 galvanized, or textured wood-grain or leather-grain steel
Continuously welded seamless design or filled seamless design
Lock edge beveled 1/8" in 2"
Polystyrene, mineral fiberboard, and polyurethane core
20, 18, or 16 gauge vertical steel stiffeners (20 gauge standard)
Sizes available: Minimum l'O" ( 3 0 5 ) x l'O" ( 3 0 5 ) , Maximum 5'0" (1524) x
10'0" (3048)
• Finish paint (Republic standard and custom colors)
Republic Doors and Frames
155 Republic Drive, McKenzie, TN 38201
800-733-3667
republic@republicdoor.com
Copyright © 2006-2008 Republic Doors and Frames
Phone: 800-733-3667
The Best Door In The Industry
DE Series Full Flush Doors
Republic's DE series doors are available in 14, 16, 18, and 20
gauge cold rolled steel or galvanealed (A60) steel. Face sheets
are continuously projection welded to hinge and lock channels on
5" centers. SDI Levels 1, 2, 3 and 4 - Physical performance level
A, B, C, D.
Features
•
•
•
•
•
•
•
•
•
l /4
3
n ( 4 4 . 4 ) full flush design, rated for light to extra heavyduty use
S e r i e s Door
A" ( 1 9 ) cell honeycomb core 1 0 0 % bonded to skins to
provide exceptional strength and flatness
Hinge edge is non-beveled and reinforced with a full height 10 gauge steel
channel projection welded at a maximum of 5" on center
16 gauge flush top and inverted bottom channels projection welded to both
skins every 2Vi" on center
Lock edge is non-beveled and reinforced with a continuous 14 gauge channel,
mortised and cylindrical lock reinforcements are integral 14 gauge
reinforcements
Doors are prepared for 4 /2" standard or heavy weight, full mortise template
hinges
Non-handed design (square lock edge)
Doors are thoroughly cleaned, phosphatized, and primed with a coat of force
cured rust inhibiting primer that meets and/or exceeds the requirements of
ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240
hour continuous humidity test per ASTM D4585)
Doors are individually packaged and fully plastic wrapped to prevent damage
3
1
Available Options
•
•
•
•
•
•
•
•
14 gauge closer reinforcement (standard option)
12 gauge closer reinforcement
A60 galvanealed, G90 galvanized, or textured wood-grain or leather-grain steel
Continuously welded seamless design or filled seamless design
Lock edge beveled 1/8" in 2"
Polystyrene, mineral fiberboard, and polyurethane solid cores
20, 18, or 16 gauge vertical steel stiffeners (20 gauge standard)
Sizes available: Minimum l'O" ( 3 0 5 ) x l'O" ( 3 0 5 ) , Maximum 5'0" (1524) x
10*0" (3048)
• Finish paint (Republic standard and custom colors)
Republic Doors and Frames
155 Republic Drive, McKenzie, TN 38201
800-733-3667
Phone: 800-733-3667
The Best Door In The Industry
door-frames
DL Series Embossed Panel Doors
Commercial Steel Door Performance with
Decorative Panel Designs
Republic offers a wide variety of embossed panel insulated doors
such as our traditional 6-panel design, 8' 6-panel design with
elongated panels, 2-panel colonial design, 4 panel, and 8 panel
designs. Doors are only available in 18 and 20 gauge
galvanealed (A60) steel. Face sheets are continuously projection
welded to hinge and lock channels on 5" centers. SDI Levels 2
and 3 - Physical performance level A
2 Panel
Features
• 1/4 ( 4 4 . 4 ) design, rated for light to extra heavy-duty use
• Polystyrene core (1 pound density) 1 0 0 % bonded to skins
to provide exceptional insulation, strength, and flatness
• Hinge edge is non-beveled and reinforced with a full height
16 gauge steel channel projection welded at a maximum of
5" on center with an additional 9 gauge reinforcement plate
at each hinge location, providing more than 3/16" ( 5 ) of
total reinforcement
• 16 gauge flush top and inverted bottom channels projection
welded to both skins every 2 % " on center
• Lock edge is non-beveled and reinforced with a continuous
16 gauge channel, mortised and cylindrical lock
reinforcements are integral 16 gauge reinforcements
• Doors are prepared for 4 /2 standard or heavy weight, full
mortise template hinges
• Non-handed design (square lock edge)
• Come standard with Vh hour Mylar Underwriters
Laboratories fire label
• Doors are thoroughly cleaned, phosphatized, and primed
with a coat of force cured rust inhibiting primer that meets
and/or exceeds the requirements of ANSI A250.10 (120
hour continuous salt spray test per ASTM B117 and 240
hour continuous humidity test per ASTM D4585)
• Doors are individually packaged and fully plastic wrapped to
prevent damage
3
M
1
4 panel
U
Available Options
• 14 gauge closer reinforcement (standard option)
• 12 gauge closer reinforcement
6 panel
(8 foot)
• Textured wood-grain (wood grain embossed are available as
prime painted only - factory stain not available)
• Continuously welded seamless design or filled seamless
design
• Lock edge beveled 1/8" in 2"
• Sizes available: Minimum T 6" x 6' 8", Maximum 3' 8" x 8'
0" (20 gauge available in 3070 or smaller only)(2' 6"
available with special lock height, not ADA compliant)
• 4 " hinges (square edge only)
• Half glass light kits (limited sizes available)
• Finish paint (Republic standard and custom colors)
**Click here to download free file v i e w e r s * *
Republic Doors and Frames
155 Republic Drive, McKenzie, TN 38201
800-733-3667
republic@republicdoor.com
Copyright © 2006-2008 Republic Doors and Frames
8 panel
Phone: 800-733-3667
The Best Door In The Industry
IIIMIFIT
DM a n d D L S e r i e s U N I F I T ™ R e p l a c e m e n t D o o r s
Republic's Unifit™ series doors are available in 16, 18, and 20 gauge cold rolled steel
or galvanealed (A60) steel. Face sheets are continuously projection welded to hinge
channels on 5" centers. SDI Levels 2 and 3 - Physical performance level A
Feature
• VA" ( 4 4 . 4 ) full flush design, rated for light to extra heavy-duty use
• A" ( 1 9 ) cell honeycomb core 1 0 0 % bonded to skins to provide exceptional
strength and flatness
• Hinge edge is non-beveled and reinforced with a full height 10 gauge steel
channel projection welded at a maximum of 5" on center. Hinge channel depth
is set at .190 and can be used for heavy or standard weight hinges
• 16 gauge flush top and inverted bottom channels projection welded to both
skins every 2 % " on center
• Lock edge is non-beveled and reinforced with a continuous 16 gauge channel
(DL series), mortised and cylindrical lock reinforcements are integral 16 gauge
reinforcements
• Non-handed design (square lock edge)
• Doors are thoroughly cleaned, phosphatized, and primed with a coat of force
cured rust inhibiting primer that meets and/or exceeds the requirements of
ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240
hour continuous humidity test per ASTM D4585)
• Doors are individually packaged and fully plastic wrapped to prevent damage
3
Available Options
•
•
•
•
•
•
14 gauge closer reinforcement (standard option)
12 gauge closer reinforcement
A60 galvanealed, G90 galvanized, or textured wood-grain
Polystyrene, mineral fiberboard, and polyurethane core
20, 18, or 16 gauge vertical steel stiffeners (20 gauge standard)
Sizes available: Minimum l'O" (305) x l'O" ( 3 0 5 ) , Maximum 5'0" (1524) x 10'
0"(3048)
**Click here to download free file v i e w e r s * *
Republic Doors and Frames
155 Republic Drive, McKenzie, TN 38201
800-733-3667
republic@republicdoor.com
Copyright © 2006-2008 Republic Doors and Frames