LED Post Top Light
LPT54/830/INT/E39
LED Retrofit Light
•
•
•
•
•
Lead-free, UV-free, and a long-lasting cold lighting source
Ballast bypass model*
Transient/surge protection
Suitable for enclosed fixture**
Lamps designed to produce at least 70% of initial light
output after 40,000 hours
• Power Factor ≥ 0.9
Item #LPT54/830/INT/E39-74
Product Code78726
UPC Code751338066748
Installation Instructions for HID retrofit bulb(LED Corn
Bulb)
Watts54W
Volts100-300VAC
1. Ensure Breaker is turned off and no power is going to the fixture.
Base
E39 Mogul
2. Unscrew existing bulb and recycle appropriately.
Beam Spread360°
3. Open/Access the ballast compartment and disconnect the ballast
CRI80
from the AC Mains and the socket.
Color Temp3000K
4.Close ballast compartment or Junction Box.
Initial
Lumens5,670
5.After installation is complete,turn breaker back on and
switch
on
power.
Average Rated Life40,000
Ambient Temp Range -20°C to 50°C
Following is the wiring diagram for led corn bulb with internal
driver(DxL)
Dimensions
and external driver
Equivalent Wattage
Warranty
3.55” x 10.75”
250W MH
5 Years
Specifications are subject to change without prior notice.
Wiring Diagram for led corn bulb (with internal driver type).
INT - Internal power supply
**Operation of the lamp at ambient temperature in excess
of 105 degrees F may impact the lumen maintenance and
or life of the product.
*Installation Note: Requires bypass
of existing
See
installation
Wiring Diagram
forballast.
led corn
bulb
(with external driver type).
instructions.
Input
IP65
Output
LED Driver
www.topaz-usa.com
NY Office: 925 Waverly Ave • Holtsville, NY 11742 • 800-666-2852 • Fax: 631-758-8026
CA Office: 225 Parkside Drive, San Fernando, CA 91340 • 888-551-2852 or 818-838-3123 • Fax: 888-690-2852 or 818-838-3102
FL Office: 2020 West 26th Street, Jacksonville, FL 32209 • 800-338-2852 • Fax: 772-778-5386
SUITABLE
FOR WET
LOCATIONS
LED Post Top Light
LPT54/850/INT/E26
LED Retrofit Light
•
•
•
•
•
Lead-free, UV-free, and a long-lasting cold lighting source
Ballast bypass model*
Transient/surge protection
Suitable for enclosed fixture**
Lamps designed to produce at least 70% of initial light
output after 40,000 hours
• Power Factor ≥ 0.9
Item #LPT54/850/INT/E26-74
Product Code78687
UPC Code751338066489
Installation Instructions for HID retrofit bulb(LED Corn Bulb)
Watts54W
Volts100-300VAC
1. Ensure Breaker is turned off and no power is going to the fixture.
Base
E26 Medium
2. Unscrew existing bulb and recycle appropriately.
Beam
3. Open/Access the ballast compartment and disconnect
the Spread360°
ballast
CRI80
from the AC Mains and the socket.
Color Temp5000K
4.Close ballast compartment or Junction Box.
5.After installation is complete,turn breaker back on and
switch
on
Initial
Lumens5,670
power.
Average Rated Life40,000
Ambient Temp Range -20°C to 50°C
Following is the wiring diagram for led corn bulb with internal
driver(DxL)
Dimensions
and external driver
3.55” x 10.75”
Equivalent Wattage
250W MH
Warranty
5 Years
Specifications are subject to change without prior notice.
Wiring Diagram for led corn bulb (with internal driver type).
INT - Internal power supply
**Operation of the lamp at ambient temperature in excess
of 105 degrees F may impact the lumen maintenance and
or life of the product.
*Installation Note: Requires bypass
of existing
See
installation
Wiring Diagram
forballast.
led corn
bulb
(with external driver type).
IP65
instructions.
Input
Output
LED Driver
www.topaz-usa.com
NY Office: 925 Waverly Ave • Holtsville, NY 11742 • 800-666-2852 • Fax: 631-758-8026
CA Office: 225 Parkside Drive, San Fernando, CA 91340 • 888-551-2852 or 818-838-3123 • Fax: 888-690-2852 or 818-838-3102
FL Office: 2020 West 26th Street, Jacksonville, FL 32209 • 800-338-2852 • Fax: 772-778-5386
SUITABLE
FOR WET
LOCATIONS
LED Post Top Light
LPT54/850/INT/E39
LED Retrofit Light
•
•
•
•
•
Lead-free, UV-free, and a long-lasting cold lighting source
Ballast bypass model*
Transient/surge protection
Suitable for enclosed fixture**
Lamps designed to produce at least 70% of initial light
output after 40,000 hours
• Power Factor ≥ 0.9
Item #LPT54/850/INT/E39-74
Product Code78688
UPC Code751338066502
Installation Instructions for HID retrofit bulb(LED Corn
Bulb)
Watts54W
Volts100-300VAC
1. Ensure Breaker is turned off and no power is going to the fixture.
Base
E39 Mogul
2. Unscrew existing bulb and recycle appropriately.
Beam Spread360°
3. Open/Access the ballast compartment and disconnect the ballast
CRI80
from the AC Mains and the socket.
Color Temp5000K
4.Close ballast compartment or Junction Box.
Initial
Lumens5,670
5.After installation is complete,turn breaker back on and
switch
on
Average Rated Life40,000
power.
Ambient Temp Range -20°C to 50°C
Following is the wiring diagram for led corn bulb with internal
driver(DxL)
Dimensions
and external driver
Equivalent Wattage
Warranty
3.55” x 10.75”
250W MH
5 Years
Specifications are subject to change without prior notice.
Wiring Diagram for led corn bulb (with internal driver type).
INT - Internal power supply
**Operation of the lamp at ambient temperature in excess
of 105 degrees F may impact the lumen maintenance and
or life of the product.
*Installation Note: Requires bypass
of existing
See
installation
Wiring Diagram
forballast.
led corn
bulb
(with external driver type).
instructions.
Input
IP65
Output
LED Driver
www.topaz-usa.com
NY Office: 925 Waverly Ave • Holtsville, NY 11742 • 800-666-2852 • Fax: 631-758-8026
CA Office: 225 Parkside Drive, San Fernando, CA 91340 • 888-551-2852 or 818-838-3123 • Fax: 888-690-2852 or 818-838-3102
FL Office: 2020 West 26th Street, Jacksonville, FL 32209 • 800-338-2852 • Fax: 772-778-5386
SUITABLE
FOR WET
LOCATIONS
LED Post Top Light
LPT75/830/INT/E39
LED Retrofit Light
•
•
•
•
•
Lead-free, UV-free, and a long-lasting cold lighting source
Ballast bypass model*
Transient/surge protection
Suitable for enclosed fixture**
Lamps designed to produce at least 70% of initial light
output after 40,000 hours
• Power Factor ≥ 0.9
Item #LPT75/830/INT/E39-74
Product Code78728
UPC Code751338066755
Installation Instructions for HID retrofit bulb(LED Corn Bulb)
Watts75W
Volts100-300VAC
1. Ensure Breaker is turned off and no power is going to
the fixture.
E39 Mogul
2. Unscrew existing bulb and recycle appropriately. Base
Beam
Spread360°
3. Open/Access the ballast compartment and disconnect the ballast
CRI80
from the AC Mains and the socket.
4.Close ballast compartment or Junction Box.
Color Temp3000K
5.After installation is complete,turn breaker back on and
switch
on
Initial
Lumens7,875
power.
Average Rated Life40,000
Ambient Temp Range -20°C to 50°C
Following is the wiring diagram for led corn bulb with internal driver
Dimensions (DxL)
and external driver
3.7” x 11.6”
Equivalent Wattage
320-400W MH
Warranty
5 Years
Wiring Diagram for led corn bulb (with internal driver type).
Specifications are subject to change without prior notice.
INT - Internal power supply
**Operation of the lamp at ambient temperature in excess
of 105 degrees F may impact the lumen maintenance and
or life of the product.
*Installation Note: Requires bypass
of existing
See
installation
Wiring Diagram
forballast.
led corn
bulb
(with external driver type).
instructions.
Input
IP65
Output
LED Driver
www.topaz-usa.com
NY Office: 925 Waverly Ave • Holtsville, NY 11742 • 800-666-2852 • Fax: 631-758-8026
CA Office: 225 Parkside Drive, San Fernando, CA 91340 • 888-551-2852 or 818-838-3123 • Fax: 888-690-2852 or 818-838-3102
FL Office: 2020 West 26th Street, Jacksonville, FL 32209 • 800-338-2852 • Fax: 772-778-5386
SUITABLE
FOR WET
LOCATIONS
LED Post Top Light
LPT75/850/INT/E39
LED Retrofit Light
•
•
•
•
•
Lead-free, UV-free, and a long-lasting cold lighting source
Ballast bypass model*
Transient/surge protection
Suitable for enclosed fixture**
Lamps designed to produce at least 70% of initial light
output after 40,000 hours
• Power Factor ≥ 0.9
Item #LPT75/850/INT/E39-74
Product Code78689
UPC Code751338066526
Installation Instructions for HID retrofit bulb(LED Corn Bulb)
Watts75W
Volts100-300VAC
1. Ensure Breaker is turned off and no power is going to the fixture.
E39 Mogul
2. Unscrew existing bulb and recycle appropriately. Base
Beam
3. Open/Access the ballast compartment and disconnect
the Spread360°
ballast
CRI80
from the AC Mains and the socket.
4.Close ballast compartment or Junction Box.
Color Temp5000K
5.After installation is complete,turn breaker back on and
switch
on
Initial
Lumens7,875
power.
Average Rated Life40,000
Ambient Temp Range -20°C to 50°C
Following is the wiring diagram for led corn bulb with internal driver
Dimensions (DxL)
and external driver
3.7” x 11.6”
Equivalent Wattage
320-400W MH
Warranty
5 Years
Wiring Diagram for led corn bulb (with internal driver type).
Specifications are subject to change without prior notice.
INT - Internal power supply
**Operation of the lamp at ambient temperature in excess
of 105 degrees F may impact the lumen maintenance and
or life of the product.
*Installation Note: Requires bypass
of existing
See
installation
Wiring Diagram
forballast.
led corn
bulb
(with external driver type).
instructions.
Input
IP65
Output
LED Driver
www.topaz-usa.com
NY Office: 925 Waverly Ave • Holtsville, NY 11742 • 800-666-2852 • Fax: 631-758-8026
CA Office: 225 Parkside Drive, San Fernando, CA 91340 • 888-551-2852 or 818-838-3123 • Fax: 888-690-2852 or 818-838-3102
FL Office: 2020 West 26th Street, Jacksonville, FL 32209 • 800-338-2852 • Fax: 772-778-5386
SUITABLE
FOR WET
LOCATIONS