Submitting Agency:
Description:
2VT8 2 32 ADP MVOLT GEB10IS PWS1836
LP841
Project:
Notes:
Cascade Periodontics
GRID MOUNT; LAMPS AND FLEX INCLUDED
Type:
A
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — The VT™ troffer combines the aesthetics and high performance levels of volumetric
lighting, with the best value for offices, schools, retail locations and hospitals. Available in one-, two- or
three-lamp configurations, with T5 or T8 lamps, this series provides the ultimate in design flexibility.
Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic
Environmental Compatibility table for suitable uses.
Type
CONSTRUCTION — Rugged, one-piece cold-rolled steel coated polyester, painted after fabrication with
embossed facets (smooth also available; see Options).
Impact-modified, single clear acrylic diffuser provides excellent shielding and wide distribution.
End plates include integral T-bar clips.
Fixture may be mounted and wired in continuous rows.
Total fixture height is only 4-3/8".
2' x 4'
T5 or T8
One, two or three lamps
OPTICS — Volumetric illumination is achieved by creating an optimal mix of light to walls, partitions,
vertical and horizontal work surfaces — rendering the interior space, objects and occupants in a more
balanced, complementary luminous environment.
Linear faceted reflector cavity softens and distributes light into the space while minimizing luminous
contrast between the fixture and ceiling.
Sloped end plates provide a smooth, luminous transition between fixture and ceiling while enhancing
the perception of fixture depth.
ELECTRICAL — Highly efficient program-start electronic ballasts, Class P, thermally protected,
resetting, HPF, non-PCB, UL Listed, CSA certified, sound rated A.
Luminaire is suitable for damp locations. AWM, TFM or THHN wire used throughout, rated for required
temperatures.
Step-level dimming option allows system to be switched to 50% power for compliance. (GEB95S)
Specifications
Ballast disconnect provided where required to comply with US and Canadian codes.
Length: 48 (122.0)
INSTALLATION — Unique grid interfacing arrangement provides mounting into standard 1" and 9/16"
tee bar or screw slot grids. 9/16" allows fixture trim to hang level with architectural ceiling tiles.
Width: 24 (61.0)
Drywall ceiling adaptors available.
LISTINGS— UL Listed to US and Canadian safety standard.
4-3/8
(11.1)
Depth: 4-3/8 (11.1)
All dimensions are inches
(centimeters).
8-1/4
(21)
24
(61.0)
Patents pending.
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Actual performance may differ as a result of end-user environment and application.
Note: Specifications subject to change without notice.
ORDERING INFORMATION
Example: 2VT8 2 32 ADP MVOLT GEB10IS LP835
Lead times will vary depending on options selected. Consult with your sales representative.
ADP
Series
Air function
2VT5 T5 2X4 volumetric
troffer
2VT8 T8 2X4 volumetric
troffer
(blank)
H
Static
Heat removal
Number of lamps
1
2
3
Ballast
GEB10IS
GEB10PS
GEB95
GEB95S
Wattage
32
32W T8 (48")
28T5
28W T5 (46")
54T5HO 54W T5HO (46")
Lamp
T8 electronic, <10% THD, instant start
T5 and T8 electronic, <10% THD, programmed start
T5 electronic, <10% THD, .95 ballast factor,
programmed start
T5 electronic, <10% THD, .95 ballast factor, step
dimming, programmed start
LP835 80+ CRI, 3500 Kelvin
LP841 80+ CRI, 4100 Kelvin
LP830 80+ CRI, 3000 Kelvin
Accessories: Order as separate catalog number.
DGA24
2VT4 F916
FLUORESCENT
Drywall ceiling adaptor, unit installation4
Trim to adjust fixture mounting flush with 9/16" T-bar; for 2x4 fixture
Diffuser
ADP
Acrylic linear
prismatic
Voltage
Ballast configuration
(blank)
MVOLT
3471
1/3
One or two lamps, per
Lithonia Lighting standards
One, three-lamp ballast2
Options
GLR
RSW
EL14
EL
CSA
Fast-blow fuse
Smooth reflector
Emergency battery pack, 1400 lumens
Emergency battery pack
Meets Canadian standards3
Notes
1. Not available with 32 T8 GEB10PS.
2. Available with 32T8 and 54T5HO only.
3. 347V only.
4 When DGA kits are used order the 2VT2 F916 accessory.
2VT-2X4
Submitting Agency:
Description:
2VT8 2 32 ADP MVOLT GEB10IS PWS1836
LP841
Project:
Notes:
Cascade Periodontics
GRID MOUNT; LAMPS AND FLEX INCLUDED
Type:
A
2VT Volumetric Recessed Lighting 2'x4'
PHOTOMETRICS
2VT8 2 32 ADP; 2800 lumens per lamp; s/m 1.2 (along), 1.4 (across); test no. LTL18809.
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 97 97 97
95 95 95
90 90 90
1 88 83 80
81 78 75
78 75 72
2 79 72 66
70 65 60
67 62 58
3 71 62 55
61 54 49
58 53 48
4 65 55 47
54 46 41
52 45 40
5 60 49 41
48 40 35
46 39 35
6 55 44 36
43 35 30
41 35 30
7 51 39 32
39 32 26
37 31 26
8 47 36 29
35 28 23
34 28 23
9 44 33 26
32 26 21
31 25 21
10 41 30 23
30 23 19
29 23 19
90°
80°
200
400
60°
600
800
1000
40°
1200
0°
20°
0°
CP Summary
0°
90
0° 1313 1313
5° 1298 1310
15° 1252 1308
25° 1161 1298
35° 1019 1264
45° 834 1196
55° 617 1081
915
65° 391
586
75° 190
110
85° 40
0
2
90
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1058
18.9
23.2
0° - 40°
1778
31.7
39.0
0° - 60°
3342
59.7
73.4
0° - 90°
4555
81.3
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4555
81.3
100.0
Efficiency: 81.3%
90°
2VT5 2 28 ADP; 2600 lumens per lamp; s/m 1.2 (along), 1.4 (across); test no. LTL18909.
90°
80°
200
400
60°
600
800
1000
1200
40°
1400
0°
20°
0°
CP Summary
0°
90
0° 1445 1445
5° 1419 1446
15° 1366 1417
25° 1263 1364
35° 1103 1287
45° 895 1184
55° 651 1049
878
65° 403
584
75° 192
94
85° 42
0
3
90
Coefficients of Utilization
pf
20%
pc
80%
70%
50%
pw 70%50%30% 50%30%10% 50%30%10%
0 107 107 107 105 105 105 100 100 100
1 97 93 88
90 87 83
87 83 81
2 88 80 73
78 72 67
75 70 65
3 80 70 62
68 61 55
65 59 54
4 73 61 53
60 52 46
58 51 45
5 67 54 46
53 45 39
51 44 39
6 61 49 40
48 40 34
46 39 34
7 57 44 36
43 36 30
42 35 30
8 53 40 32
40 32 27
38 31 27
9 49 37 29
36 29 24
35 29 24
10 46 34 27
33 26 22
33 26 22
RCR
180°
Zonal Lumen Summary
Zone
Lumens % Lamp % Fixture
0° - 30°
1140
21.9
24.3
0° - 40°
1893
36.4
40.4
0° - 60°
3483
67.0
74.3
0° - 90°
4686
90.1
100.0
90° - 180°
0
0.0
0.0
0° - 180°
4686
90.1
100.0
Efficiency: 90.1%
90°
MOUNTING DATA
9/16
9/16
with accessory 2VT4 F916
15/16
Screw Slot
2VT-2X4
FLUORESCENT: One Lithonia Way, Conyers, GA 30012 Phone: 800-858-7763 Fax: 770-929-8789 www.lithonia.com
© 2010-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/17/14
Submitting Agency:
Type:
Description:
LB 3 32 MVOLT 1/3 GEB10IS
Project:
Notes:
Cascade Periodontics
1-BALLAST; (3) F32T8 LAMPS--BY OTHERS
B
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
For applications that require the clean appearance of a low-profile, brightness-controlled wraparound. Provides broad distribution of light for offices,
schools and corridors. Certain airborne contaminants can diminish integrity
of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.
ATTRIBUTES
Curved prismatic diffuser with linear side prisms minimize lamp image and
provides high angle brightness control. Luminous end plates soften appearance for improved aesthetics.
CONSTRUCTION
Metal parts are die formed from code-gauge steel. Prismatic diffuser is 100%
acrylic with sonically welded luminous ends. Continuous side flanges on fixture body provide light trap and continuous diffuser support to prevent accidental opening and simplify maintenance.
FINISH
Five stage iron-phosphate pretreatment assure superior paint adhesion and
rust resistance.
Painted parts finished with high-gloss, high-reflectivity baked white polyester
enamel (low VOC).
ELECTRICAL SYSTEM
Thermally-protected, resetting, Class P, HPF, non-PCB, UL Listed, CSA Certified
ballast is standard. Luminaire is suitable for damp locations. AWM, TFN or
THHN wire used throughout, rated for required temperatures.
UL/CSA listed ballast disconnect w/strain relief and leads provided standard.
LISTING
UL Listed (standard). Optional: Canada CSA or C-UL. Mexico NOM.
WARRANTY
Guaranteed for one year against mechanical defects in manufacture.
ORDERING INFORMATION
Low-Profile Wraparound
LB 3
T5 and T8
3 lamps
Wide body
4' or 8' length
Specifications
T8 Length: 24 (61.00) 48 (122.00)
or 96 (243.90)
T5 Length: 46.5 (118.1) 22.5 (57.2)
Width:
15-3/8 (39.05)
Depth:
3 (7.62)
H
W
All dimensions are inches (centimeters) .
Specifications subject to change without notice.
For shortest lead times, configure product using standard options (shown in bold).
Example: LB 3 32 MVOLT GEB10IS
LB
3
Series
Number of
lamps
LB 3 lamps, 15-3/8"
wide
For tandem, double-length unit,
add prefix T. Example: TLB
3
Not included
Lamp type
32
32W T8 (48")
28
28W T5 (46.5")2
Voltage
Options
120
277
347
1/3 One, three-lamp ballast
GEB10IS Electronic ballast, <10% THD, instant start
MVOLT
Others
available
GEB10PS Electronic ballast, <10% THD, program start
EL Emergency battery pack (nominal 300 lumens
See Life Safety Section).
GLR Internal fast-blow fuse.1
GMF Internal slow-blow fuse.1
LSC Lens safety clips (2 per fixture).
LP_ Lamped; specify lamp type and color
CSA Listed and labeled to comply with Canadian
Standards.
SSR Specular silver interior finish (95% reflective).
NOTES:
1 Must specify voltage.
2 All T5 lamp types use GEB10PS ballast only.
Accessories
Order as separate item
SQ Swivel-stem hanger (specify in 2" increments).
1B Ceiling spacer (adjusts from 1-1/2" to 2-1/2" from ceiling).
Fluorescent
Sheet #: LB 3W
WRAP-190
Submitting Agency:
Type:
Description:
LB 3 32 MVOLT 1/3 GEB10IS
Project:
Notes:
Cascade Periodontics
1-BALLAST; (3) F32T8 LAMPS--BY OTHERS
B
LB 3 Low-Profile Wraparound, Wide Body
MOUNTING DATA
DIMENSIONS
For unit or row installation, surface or stem mounting. Stem mounting not available on TLB
units.
Inches (centimeters). Subject
to change without notice.
Individual installation — Four single-stem hangers required.
Row installation — Two hangers per fixture plus two per row
required.
A
C
D
E
See ACCESSORIES below for hanging devices.
=
=
=
=
1/4 x 1/2 (.635 x 1.27) hole
7/8 (2.22) Dia.K.O.
11/16 (1.74) Dia. K.O.
2 (5.08) Dia. K.O. and 7/8 (2.22) Dia. K.O.
PHOTOMETRICS
Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Floor reflectances are 20%. Lamp configurations shown are typical. Full photometric data on
these and other configurations available upon request.
LB 3 32
Report LTL 5638 – Lumens per lamp = 2900
S/MH (along) 1.2 (across) 1.3
Coefficient of Utilization
Ceiling
Energy (Calculated in accordance with NEMA standard LE-5)
LER.FW
65
80%
70%
50%
0%
Wall
70% 50% 30%
70% 50% 30%
50% 30% 10%
0%
0
1
2
3
4
5
6
7
8
9
10
87
80
74
68
63
57
53
49
45
42
39
84
77
71
65
60
55
51
47
44
40
37
87
77
68
61
54
49
44
39
35
32
29
87
74
63
55
48
42
37
33
29
26
23
84
74
66
59
53
47
43
38
35
31
28
84
71
62
54
47
41
37
33
29
25
23
79
70
62
56
50
45
41
37
33
30
27
79
67
59
51
45
40
35
32
28
25
22
79
65
56
48
42
36
32
28
24
21
19
ANNUAL
ENERGY COST*
LAMP
DESCRIPTION
LAMP
LUMENS
BALLAST
FACTOR
WATTS
$3.69
(3) 32W T8
2850
.88
87
*Calculated in accordance with NEMA Standard LE-5.
67
57
49
43
37
32
28
25
22
19
16
Zonal Lumens Summary
Zone
0-30
0-40
0-60
0-90
90-180
0-180
Lumens %Lamp %Fixture
1786
2935
4808
5835
668
6503
20.5
33.7
55.3
67.1
7.7
74.8
27.5
45.1
73.9
89.7
10.3
100.0
Lithonia Lighting
Sheet #: LB 3 W
©2000 Acuity Brands Lighting, Inc., All rights reserved, Rev. 11/16/09
Fluorescent
One Lithonia Way, Conyers, GA 30012-3957
Phone: 800-858-7763 Fax: 770-929-8789
www.lithonia.com
Catalog Number:
CV6-126/32T
Submitted by CASCADE LIGHTING REPRESENTATIVES
Job Name:
Type:
C-HSG
Cascade Periodontics
Notes:
CLRPDX14-23499
P13.1.1
ACULUX® RECESSED DOWNLIGHT
6” VERTICAL CFL, OPEN APERTURE
TC Rated, One 26W or 32W Triple Tube
CV6-126/32T-600 SERIES
Project:
Fixture Type:
Location:
Contact/Phone:
PRODUCT SPECIFICATIONS
DIMENSIONS
Lamp One 26W or 32W triple tube compact fluorescent lamp
CFTR26W/GX24q-3 or CFTR32W/GX24q-3 • 4 pin electronic.
11 3/4"
Socket Housing Vented, extruded aluminum housing with heat
dissipating fins • Single-position, keyed reflector attachment.
Ballast 120V thru 277V HPF Electronic with end-of-life lamp
protection • 347V HPF Electronic available in Canada • Optional
Dimming ballast available • U.L. listed/CSA certified.
11 1/2"
Trim Ring White, Satin Chrome, or Classic Aged Bronze
Polycarbonate • Optional self-flanged trim with same finish as
reflector.
9 3/8"
Reflector .050” aluminum reflector with low iridescent clear,
gold or haze finish • Other finishes including wheat, straw and
pewter available on special order basis.
Labels U.L. listed for through-branch wiring and damp locations
• Product mechanically protected against improper use of lamps
• Union made • CSA certified.
6"
7 5/8"
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
6 7/8" CEILING CUTOUT
ENGINEERING DATA
INSTALLATION
Mounting Bracket Rough-in section equipped with vertically
adjustable mounting brackets that accept 1⁄2” conduit, “C” channels
(HB-26 or HB-50), linear flat bars (LB-27) or 26” telescoping Real
Nail bar hangers (HB-1).
Junction Box Pre-wired junction box provided with (5)1⁄2˝ and
(1)3⁄4˝ knockouts, U.L. listed/CSA certified for through branch
wiring, maximum 8 No. 12 AWG 90° C branch circuit conductors
(4 in, 4 out) • Junction box provided with removable access plates
• Knockouts equipped with pryout slots.
Mounting Frame 16-gauge galvanized steel mounting ring with
factory installed reflector mounting clips • Rough-in section
(junction box, mounting frame, mounting brackets, ballast and
socket assembly) fully assembled for ease of installation
• Accommodates 7⁄8˝ ceiling thickness maximum.
Total input power
120V-HPF
26W/32W
28W/35W
277V-HPF
26W/32W
28W/35W
347V-HPF Canada
26W/32W
38W/42W
Operating AMPS
Power Factor
T.H.D.
.23A/.29A
>.98
<10%
.10A/.13A
>.98
<10%
.11A/.12A
>.97
<10%
Min. starting
0°F/
0°F/
0°F/
temperature
Crest Factor
Ballast Factor
-18°C
<1.65
>.98
-18°C
<1.65
>.98
-18°C
<1.65
1.00
ACCESSORIES
Catalog No.
HB-1
HB-26
HB-50
LB-27
PLK-E
Description
Two Real Nail Bar Hangers
Two 26˝ C-channel bar hangers
Two 50˝ C-channel bar hangers
Two 27˝ linear bar hangers
13-42W emerg. power kit (Elect. Ballast)
To order, specify catalog number.
PRODUCT CODES
Catalog Number
Reflector Finish, Trim
Ballast
Wattage and Lamp
CV6-126/32T-600C-WH
CV6-126/32T-600G-WH
CV6-126/32T-600HZ-WH
CV6-126/32T-600WHZ-WH
Low Iridescent Clear Alzak, White Trim
Low Iridescent Gold Alzak, White Trim
Low Iridescent Haze, White Trim
Low Iridescent Wheat Haze, White Trim
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
REV-7/10
OPTIONS
(Add as suffix to housing or trim)
Catalog No.
347
DB120
DB277
SF
Description
347V, HPF Electronic Ballast
120V Dimming Ballast
277V Dimming Ballast
Self-Flanged Reflector
Ordering Example: CV6-126/32T-347-600C-SF
Catalog Number:
CV6-126/32T
Submitted by CASCADE LIGHTING REPRESENTATIVES
Job Name:
Type:
C-HSG
Cascade Periodontics
Notes:
CLRPDX14-23499
P13.1.1
ACULUX® RECESSED DOWNLIGHT
PHOTOMETRIC REPORT
Test Report #: PT05991510
Catalog No: CV6-126/32T-600C-WH
Total Luminaire Efficiency: 70.7%
Luminaire Spacing Criterion: 1.0
Luminaire: Recessed Clear Alzak Reflector Downlight
Lamp: One 26W Triple Tube CFL lamp rated @ 1800 lumens
6” VERTICAL CFL, OPEN APERTURE
TC Rated, One 26W or 32W Triple Tube
CV6-126/32T-600 SERIES
LUMINANCE
CANDLEPOWER DISTRIBUTION (Candelas)
(Average cd/m2)
Degrees
Vertical
Average
Average
0
725
Degrees
Luminance
5
753
10
778
45
26,500
15
765
20
761
55
1,530
25
729
30
671
65
0
35
585
75
0
40
475
45
342
85
0
50
138
55
16
60
0
65
0
70
0
75
0
80
0
85
0
90
0
*Multipliers: 32W - 1.33, Gold - 0.9, Haze - 0.95
200
400
600
800
ZONAL LUMEN
SUMMARY
Zone
Lumens %Lamp %Fixture
0 - 30°
624
34.7
49.1
0 - 40°
987
54.8
77.5
0 - 60°
1268
70.5
99.7
0 - 90°
1272
70.7
100.0
90 - 180°
0
0
0
0 - 180°
1272
70.7
100.0
COEFFICIENTS OF UTILIZATION– % (Zonal Cavity Method) Effective Floor Cavity Reflectance 20% (ρfc)
ρcc
80
70
50
30
10
ρw
RCR
50 30 10
50 30 10
50 30 10
50 30 10
50 30 10
0
1
2
3
4
5
6
7
8
9
10
84
77
71
65
60
55
50
46
43
40
37
84
75
68
61
55
50
45
41
38
35
32
ρcc – Ceiling Cavity Reflectance (%)
84
73
65
58
52
46
42
38
35
32
29
82
76
70
64
59
54
50
46
43
39
37
82
74
67
60
54
49
45
41
38
35
32
82
72
64
57
51
46
42
38
35
32
29
78
73
67
62
57
53
49
45
42
39
36
78
71
65
59
53
49
44
41
37
34
32
78
70
63
56
51
46
41
38
34
32
29
75
70
65
60
56
51
48
44
41
38
35
75
69
63
57
52
48
44
40
37
34
32
75
68
61
55
50
45
41
37
34
31
29
72
68
63
59
54
50
47
43
40
37
35
72
67
61
56
52
47
43
40
37
34
31
0
0
70
65
59
53
48
44
40
36
33
30
28
72
66
60
54
49
45
41
37
34
31
29
ρw – Wall Reflectance (%)
INITIAL FOOTCANDLES
AVERAGE INITIAL FOOTCANDLES
One Unit, 26 Watt, 66° Beam
Multiple Units (Square Array, 60’ x 60’ Room)
Footcandles
Beam Edge
Footcandles
Beam Center
Beam
Diameter
Distance to Illuminated Plane
(Feet)
5.9
20.1
7.9’
6
3.3
11.3
10.5’
8
2.1
7.3
13.1’
10
1.5
5.0
15.7’
12
1.1
3.7
18.3’
14
Ceiling 80% Wall 50% Floor 20%
Spacing
RCR1
RCR3
RCR5
4.0´
87
73
62
5.0´
55
47
40
6.0´
39
33
28
7.0´
31
26
22
25
21
18
0.8
2.8
21.0’
16
8.0´
0.7
2.2
23.6’
18
9.0´
19
16
13
0.5
1.8
26.2’
20
10.0´
14
12
10
(Beam Edge defined as 50% of Maximum Nadir Candlepower)
*Note: Mulitipliers are provided for estimating purposes only. Use IES photometric files for precise photometric information.
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925
220 Chrysler Drive • Brampton, Ontario • Canada L6S 6B6 • Phone (905) 792-7335 • Fax (905) 792-0064
Printed in U.S.A. ©2010 Juno Lighting, LLC.
Visit us at www.junolightinggroup.com
Catalog Number:
600C-WH
Submitted by CASCADE LIGHTING REPRESENTATIVES
Job Name:
Type:
C-TRIM
Cascade Periodontics
Notes:
CLRPDX14-23499
P13.1.1
ACULUX® RECESSED DOWNLIGHT
6” VERTICAL CFL, OPEN APERTURE
TC Rated, One 26W or 32W Triple Tube
CV6-126/32T-600 SERIES
Project:
Fixture Type:
Location:
Contact/Phone:
PRODUCT SPECIFICATIONS
DIMENSIONS
Lamp One 26W or 32W triple tube compact fluorescent lamp
CFTR26W/GX24q-3 or CFTR32W/GX24q-3 • 4 pin electronic.
11 3/4"
Socket Housing Vented, extruded aluminum housing with heat
dissipating fins • Single-position, keyed reflector attachment.
Ballast 120V thru 277V HPF Electronic with end-of-life lamp
protection • 347V HPF Electronic available in Canada • Optional
Dimming ballast available • U.L. listed/CSA certified.
11 1/2"
Trim Ring White, Satin Chrome, or Classic Aged Bronze
Polycarbonate • Optional self-flanged trim with same finish as
reflector.
9 3/8"
Reflector .050” aluminum reflector with low iridescent clear,
gold or haze finish • Other finishes including wheat, straw and
pewter available on special order basis.
Labels U.L. listed for through-branch wiring and damp locations
• Product mechanically protected against improper use of lamps
• Union made • CSA certified.
6"
7 5/8"
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
6 7/8" CEILING CUTOUT
ENGINEERING DATA
INSTALLATION
Mounting Bracket Rough-in section equipped with vertically
adjustable mounting brackets that accept 1⁄2” conduit, “C” channels
(HB-26 or HB-50), linear flat bars (LB-27) or 26” telescoping Real
Nail bar hangers (HB-1).
Junction Box Pre-wired junction box provided with (5)1⁄2˝ and
(1)3⁄4˝ knockouts, U.L. listed/CSA certified for through branch
wiring, maximum 8 No. 12 AWG 90° C branch circuit conductors
(4 in, 4 out) • Junction box provided with removable access plates
• Knockouts equipped with pryout slots.
Mounting Frame 16-gauge galvanized steel mounting ring with
factory installed reflector mounting clips • Rough-in section
(junction box, mounting frame, mounting brackets, ballast and
socket assembly) fully assembled for ease of installation
• Accommodates 7⁄8˝ ceiling thickness maximum.
Total input power
120V-HPF
26W/32W
28W/35W
277V-HPF
26W/32W
28W/35W
347V-HPF Canada
26W/32W
38W/42W
Operating AMPS
Power Factor
T.H.D.
.23A/.29A
>.98
<10%
.10A/.13A
>.98
<10%
.11A/.12A
>.97
<10%
Min. starting
0°F/
0°F/
0°F/
temperature
Crest Factor
Ballast Factor
-18°C
<1.65
>.98
-18°C
<1.65
>.98
-18°C
<1.65
1.00
ACCESSORIES
Catalog No.
HB-1
HB-26
HB-50
LB-27
PLK-E
Description
Two Real Nail Bar Hangers
Two 26˝ C-channel bar hangers
Two 50˝ C-channel bar hangers
Two 27˝ linear bar hangers
13-42W emerg. power kit (Elect. Ballast)
To order, specify catalog number.
PRODUCT CODES
Catalog Number
Reflector Finish, Trim
Ballast
Wattage and Lamp
CV6-126/32T-600C-WH
CV6-126/32T-600G-WH
CV6-126/32T-600HZ-WH
CV6-126/32T-600WHZ-WH
Low Iridescent Clear Alzak, White Trim
Low Iridescent Gold Alzak, White Trim
Low Iridescent Haze, White Trim
Low Iridescent Wheat Haze, White Trim
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
REV-7/10
OPTIONS
(Add as suffix to housing or trim)
Catalog No.
347
DB120
DB277
SF
Description
347V, HPF Electronic Ballast
120V Dimming Ballast
277V Dimming Ballast
Self-Flanged Reflector
Ordering Example: CV6-126/32T-347-600C-SF
Catalog Number:
CV6-126/32T
Submitted by CASCADE LIGHTING REPRESENTATIVES
Job Name:
Type:
C-EM HSG
Cascade Periodontics
Notes:
CLRPDX14-23499
P13.1.1
ACULUX® RECESSED DOWNLIGHT
6” VERTICAL CFL, OPEN APERTURE
TC Rated, One 26W or 32W Triple Tube
CV6-126/32T-600 SERIES
Project:
Fixture Type:
Location:
Contact/Phone:
PRODUCT SPECIFICATIONS
DIMENSIONS
Lamp One 26W or 32W triple tube compact fluorescent lamp
CFTR26W/GX24q-3 or CFTR32W/GX24q-3 • 4 pin electronic.
11 3/4"
Socket Housing Vented, extruded aluminum housing with heat
dissipating fins • Single-position, keyed reflector attachment.
Ballast 120V thru 277V HPF Electronic with end-of-life lamp
protection • 347V HPF Electronic available in Canada • Optional
Dimming ballast available • U.L. listed/CSA certified.
11 1/2"
Trim Ring White, Satin Chrome, or Classic Aged Bronze
Polycarbonate • Optional self-flanged trim with same finish as
reflector.
9 3/8"
Reflector .050” aluminum reflector with low iridescent clear,
gold or haze finish • Other finishes including wheat, straw and
pewter available on special order basis.
Labels U.L. listed for through-branch wiring and damp locations
• Product mechanically protected against improper use of lamps
• Union made • CSA certified.
6"
7 5/8"
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
6 7/8" CEILING CUTOUT
ENGINEERING DATA
INSTALLATION
Mounting Bracket Rough-in section equipped with vertically
adjustable mounting brackets that accept 1⁄2” conduit, “C” channels
(HB-26 or HB-50), linear flat bars (LB-27) or 26” telescoping Real
Nail bar hangers (HB-1).
Junction Box Pre-wired junction box provided with (5)1⁄2˝ and
(1)3⁄4˝ knockouts, U.L. listed/CSA certified for through branch
wiring, maximum 8 No. 12 AWG 90° C branch circuit conductors
(4 in, 4 out) • Junction box provided with removable access plates
• Knockouts equipped with pryout slots.
Mounting Frame 16-gauge galvanized steel mounting ring with
factory installed reflector mounting clips • Rough-in section
(junction box, mounting frame, mounting brackets, ballast and
socket assembly) fully assembled for ease of installation
• Accommodates 7⁄8˝ ceiling thickness maximum.
Total input power
120V-HPF
26W/32W
28W/35W
277V-HPF
26W/32W
28W/35W
347V-HPF Canada
26W/32W
38W/42W
Operating AMPS
Power Factor
T.H.D.
.23A/.29A
>.98
<10%
.10A/.13A
>.98
<10%
.11A/.12A
>.97
<10%
Min. starting
0°F/
0°F/
0°F/
temperature
Crest Factor
Ballast Factor
-18°C
<1.65
>.98
-18°C
<1.65
>.98
-18°C
<1.65
1.00
ACCESSORIES
Catalog No.
HB-1
HB-26
HB-50
LB-27
PLK-E
Description
Two Real Nail Bar Hangers
Two 26˝ C-channel bar hangers
Two 50˝ C-channel bar hangers
Two 27˝ linear bar hangers
13-42W emerg. power kit (Elect. Ballast)
To order, specify catalog number.
PRODUCT CODES
Catalog Number
Reflector Finish, Trim
Ballast
Wattage and Lamp
CV6-126/32T-600C-WH
CV6-126/32T-600G-WH
CV6-126/32T-600HZ-WH
CV6-126/32T-600WHZ-WH
Low Iridescent Clear Alzak, White Trim
Low Iridescent Gold Alzak, White Trim
Low Iridescent Haze, White Trim
Low Iridescent Wheat Haze, White Trim
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
REV-7/10
OPTIONS
(Add as suffix to housing or trim)
Catalog No.
347
DB120
DB277
SF
Description
347V, HPF Electronic Ballast
120V Dimming Ballast
277V Dimming Ballast
Self-Flanged Reflector
Ordering Example: CV6-126/32T-347-600C-SF
Catalog Number:
CV6-126/32T
Submitted by CASCADE LIGHTING REPRESENTATIVES
Job Name:
Type:
C-EM HSG
Cascade Periodontics
Notes:
CLRPDX14-23499
P13.1.1
ACULUX® RECESSED DOWNLIGHT
PHOTOMETRIC REPORT
Test Report #: PT05991510
Catalog No: CV6-126/32T-600C-WH
Total Luminaire Efficiency: 70.7%
Luminaire Spacing Criterion: 1.0
Luminaire: Recessed Clear Alzak Reflector Downlight
Lamp: One 26W Triple Tube CFL lamp rated @ 1800 lumens
6” VERTICAL CFL, OPEN APERTURE
TC Rated, One 26W or 32W Triple Tube
CV6-126/32T-600 SERIES
LUMINANCE
CANDLEPOWER DISTRIBUTION (Candelas)
(Average cd/m2)
Degrees
Vertical
Average
Average
0
725
Degrees
Luminance
5
753
10
778
45
26,500
15
765
20
761
55
1,530
25
729
30
671
65
0
35
585
75
0
40
475
45
342
85
0
50
138
55
16
60
0
65
0
70
0
75
0
80
0
85
0
90
0
*Multipliers: 32W - 1.33, Gold - 0.9, Haze - 0.95
200
400
600
800
ZONAL LUMEN
SUMMARY
Zone
Lumens %Lamp %Fixture
0 - 30°
624
34.7
49.1
0 - 40°
987
54.8
77.5
0 - 60°
1268
70.5
99.7
0 - 90°
1272
70.7
100.0
90 - 180°
0
0
0
0 - 180°
1272
70.7
100.0
COEFFICIENTS OF UTILIZATION– % (Zonal Cavity Method) Effective Floor Cavity Reflectance 20% (ρfc)
ρcc
80
70
50
30
10
ρw
RCR
50 30 10
50 30 10
50 30 10
50 30 10
50 30 10
0
1
2
3
4
5
6
7
8
9
10
84
77
71
65
60
55
50
46
43
40
37
84
75
68
61
55
50
45
41
38
35
32
ρcc – Ceiling Cavity Reflectance (%)
84
73
65
58
52
46
42
38
35
32
29
82
76
70
64
59
54
50
46
43
39
37
82
74
67
60
54
49
45
41
38
35
32
82
72
64
57
51
46
42
38
35
32
29
78
73
67
62
57
53
49
45
42
39
36
78
71
65
59
53
49
44
41
37
34
32
78
70
63
56
51
46
41
38
34
32
29
75
70
65
60
56
51
48
44
41
38
35
75
69
63
57
52
48
44
40
37
34
32
75
68
61
55
50
45
41
37
34
31
29
72
68
63
59
54
50
47
43
40
37
35
72
67
61
56
52
47
43
40
37
34
31
0
0
70
65
59
53
48
44
40
36
33
30
28
72
66
60
54
49
45
41
37
34
31
29
ρw – Wall Reflectance (%)
INITIAL FOOTCANDLES
AVERAGE INITIAL FOOTCANDLES
One Unit, 26 Watt, 66° Beam
Multiple Units (Square Array, 60’ x 60’ Room)
Footcandles
Beam Edge
Footcandles
Beam Center
Beam
Diameter
Distance to Illuminated Plane
(Feet)
5.9
20.1
7.9’
6
3.3
11.3
10.5’
8
2.1
7.3
13.1’
10
1.5
5.0
15.7’
12
1.1
3.7
18.3’
14
Ceiling 80% Wall 50% Floor 20%
Spacing
RCR1
RCR3
RCR5
4.0´
87
73
62
5.0´
55
47
40
6.0´
39
33
28
7.0´
31
26
22
25
21
18
0.8
2.8
21.0’
16
8.0´
0.7
2.2
23.6’
18
9.0´
19
16
13
0.5
1.8
26.2’
20
10.0´
14
12
10
(Beam Edge defined as 50% of Maximum Nadir Candlepower)
*Note: Mulitipliers are provided for estimating purposes only. Use IES photometric files for precise photometric information.
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925
220 Chrysler Drive • Brampton, Ontario • Canada L6S 6B6 • Phone (905) 792-7335 • Fax (905) 792-0064
Printed in U.S.A. ©2010 Juno Lighting, LLC.
Visit us at www.junolightinggroup.com
Catalog Number:
600C-WH
Submitted by CASCADE LIGHTING REPRESENTATIVES
Job Name:
Type:
C-EM TRIM
Cascade Periodontics
Notes:
CLRPDX14-23499
P13.1.1
ACULUX® RECESSED DOWNLIGHT
6” VERTICAL CFL, OPEN APERTURE
TC Rated, One 26W or 32W Triple Tube
CV6-126/32T-600 SERIES
Project:
Fixture Type:
Location:
Contact/Phone:
PRODUCT SPECIFICATIONS
DIMENSIONS
Lamp One 26W or 32W triple tube compact fluorescent lamp
CFTR26W/GX24q-3 or CFTR32W/GX24q-3 • 4 pin electronic.
11 3/4"
Socket Housing Vented, extruded aluminum housing with heat
dissipating fins • Single-position, keyed reflector attachment.
Ballast 120V thru 277V HPF Electronic with end-of-life lamp
protection • 347V HPF Electronic available in Canada • Optional
Dimming ballast available • U.L. listed/CSA certified.
11 1/2"
Trim Ring White, Satin Chrome, or Classic Aged Bronze
Polycarbonate • Optional self-flanged trim with same finish as
reflector.
9 3/8"
Reflector .050” aluminum reflector with low iridescent clear,
gold or haze finish • Other finishes including wheat, straw and
pewter available on special order basis.
Labels U.L. listed for through-branch wiring and damp locations
• Product mechanically protected against improper use of lamps
• Union made • CSA certified.
6"
7 5/8"
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
6 7/8" CEILING CUTOUT
ENGINEERING DATA
INSTALLATION
Mounting Bracket Rough-in section equipped with vertically
adjustable mounting brackets that accept 1⁄2” conduit, “C” channels
(HB-26 or HB-50), linear flat bars (LB-27) or 26” telescoping Real
Nail bar hangers (HB-1).
Junction Box Pre-wired junction box provided with (5)1⁄2˝ and
(1)3⁄4˝ knockouts, U.L. listed/CSA certified for through branch
wiring, maximum 8 No. 12 AWG 90° C branch circuit conductors
(4 in, 4 out) • Junction box provided with removable access plates
• Knockouts equipped with pryout slots.
Mounting Frame 16-gauge galvanized steel mounting ring with
factory installed reflector mounting clips • Rough-in section
(junction box, mounting frame, mounting brackets, ballast and
socket assembly) fully assembled for ease of installation
• Accommodates 7⁄8˝ ceiling thickness maximum.
Total input power
120V-HPF
26W/32W
28W/35W
277V-HPF
26W/32W
28W/35W
347V-HPF Canada
26W/32W
38W/42W
Operating AMPS
Power Factor
T.H.D.
.23A/.29A
>.98
<10%
.10A/.13A
>.98
<10%
.11A/.12A
>.97
<10%
Min. starting
0°F/
0°F/
0°F/
temperature
Crest Factor
Ballast Factor
-18°C
<1.65
>.98
-18°C
<1.65
>.98
-18°C
<1.65
1.00
ACCESSORIES
Catalog No.
HB-1
HB-26
HB-50
LB-27
PLK-E
Description
Two Real Nail Bar Hangers
Two 26˝ C-channel bar hangers
Two 50˝ C-channel bar hangers
Two 27˝ linear bar hangers
13-42W emerg. power kit (Elect. Ballast)
To order, specify catalog number.
PRODUCT CODES
Catalog Number
Reflector Finish, Trim
Ballast
Wattage and Lamp
CV6-126/32T-600C-WH
CV6-126/32T-600G-WH
CV6-126/32T-600HZ-WH
CV6-126/32T-600WHZ-WH
Low Iridescent Clear Alzak, White Trim
Low Iridescent Gold Alzak, White Trim
Low Iridescent Haze, White Trim
Low Iridescent Wheat Haze, White Trim
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
REV-7/10
OPTIONS
(Add as suffix to housing or trim)
Catalog No.
347
DB120
DB277
SF
Description
347V, HPF Electronic Ballast
120V Dimming Ballast
277V Dimming Ballast
Self-Flanged Reflector
Ordering Example: CV6-126/32T-347-600C-SF
Catalog Number:
PLK-E
Submitted by CASCADE LIGHTING REPRESENTATIVES
Job Name:
Type:
C-EM PACK
Cascade Periodontics
Notes:
CLRPDX14-23499
P13.1.1
ACULUX® RECESSED DOWNLIGHT
6” VERTICAL CFL, OPEN APERTURE
TC Rated, One 26W or 32W Triple Tube
CV6-126/32T-600 SERIES
Project:
Fixture Type:
Location:
Contact/Phone:
PRODUCT SPECIFICATIONS
DIMENSIONS
Lamp One 26W or 32W triple tube compact fluorescent lamp
CFTR26W/GX24q-3 or CFTR32W/GX24q-3 • 4 pin electronic.
11 3/4"
Socket Housing Vented, extruded aluminum housing with heat
dissipating fins • Single-position, keyed reflector attachment.
Ballast 120V thru 277V HPF Electronic with end-of-life lamp
protection • 347V HPF Electronic available in Canada • Optional
Dimming ballast available • U.L. listed/CSA certified.
11 1/2"
Trim Ring White, Satin Chrome, or Classic Aged Bronze
Polycarbonate • Optional self-flanged trim with same finish as
reflector.
9 3/8"
Reflector .050” aluminum reflector with low iridescent clear,
gold or haze finish • Other finishes including wheat, straw and
pewter available on special order basis.
Labels U.L. listed for through-branch wiring and damp locations
• Product mechanically protected against improper use of lamps
• Union made • CSA certified.
6"
7 5/8"
Testing All reports are based on published industry procedures;
field performance may differ from laboratory performance.
Product specifications subject to change without notice.
6 7/8" CEILING CUTOUT
ENGINEERING DATA
INSTALLATION
Mounting Bracket Rough-in section equipped with vertically
adjustable mounting brackets that accept 1⁄2” conduit, “C” channels
(HB-26 or HB-50), linear flat bars (LB-27) or 26” telescoping Real
Nail bar hangers (HB-1).
Junction Box Pre-wired junction box provided with (5)1⁄2˝ and
(1)3⁄4˝ knockouts, U.L. listed/CSA certified for through branch
wiring, maximum 8 No. 12 AWG 90° C branch circuit conductors
(4 in, 4 out) • Junction box provided with removable access plates
• Knockouts equipped with pryout slots.
Mounting Frame 16-gauge galvanized steel mounting ring with
factory installed reflector mounting clips • Rough-in section
(junction box, mounting frame, mounting brackets, ballast and
socket assembly) fully assembled for ease of installation
• Accommodates 7⁄8˝ ceiling thickness maximum.
Total input power
120V-HPF
26W/32W
28W/35W
277V-HPF
26W/32W
28W/35W
347V-HPF Canada
26W/32W
38W/42W
Operating AMPS
Power Factor
T.H.D.
.23A/.29A
>.98
<10%
.10A/.13A
>.98
<10%
.11A/.12A
>.97
<10%
Min. starting
0°F/
0°F/
0°F/
temperature
Crest Factor
Ballast Factor
-18°C
<1.65
>.98
-18°C
<1.65
>.98
-18°C
<1.65
1.00
ACCESSORIES
Catalog No.
HB-1
HB-26
HB-50
LB-27
PLK-E
Description
Two Real Nail Bar Hangers
Two 26˝ C-channel bar hangers
Two 50˝ C-channel bar hangers
Two 27˝ linear bar hangers
13-42W emerg. power kit (Elect. Ballast)
To order, specify catalog number.
PRODUCT CODES
Catalog Number
Reflector Finish, Trim
Ballast
Wattage and Lamp
CV6-126/32T-600C-WH
CV6-126/32T-600G-WH
CV6-126/32T-600HZ-WH
CV6-126/32T-600WHZ-WH
Low Iridescent Clear Alzak, White Trim
Low Iridescent Gold Alzak, White Trim
Low Iridescent Haze, White Trim
Low Iridescent Wheat Haze, White Trim
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
HPF 120V - 277V, Elect.
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
26W or 32W Triple Tube CFL
REV-7/10
OPTIONS
(Add as suffix to housing or trim)
Catalog No.
347
DB120
DB277
SF
Description
347V, HPF Electronic Ballast
120V Dimming Ballast
277V Dimming Ballast
Self-Flanged Reflector
Ordering Example: CV6-126/32T-347-600C-SF
Submitting Agency:
Description:
HH6PL-1X32-E-MVOLT / 6507-CL-WH
Project:
Notes:
Cascade Periodontics
(1) F32TRT LAMP--BY OTHERS
Type:
CW
MAXILUME
hH6PL CFL HORIZONTAL 6” DOWNLIGHT
Architectural
DESCRIPTION:
1. LAMP HOLDER - Aluminum lamp holder effectively provides heat
dissipation and ventilation. Unitized optics guarantees proper trim to housing
installation. Tool-less installation adjustability from either outside the housing or
inside the housing.
2. MOUNTING BRACKET - Constructed from 16-gauge steel and is
supplied with C-channels that are adjustable up to 28”. Mounting brackets may
be adjusted up to 2-3/4” vertically from inside the housing.
3. RETAINING SPRINGS - Precision tooled springs secure trim to
mounting frame, for effortless and tool-less installation.
4. JUNCTION BOX/BALLAST - UL and ETL listed for through-branch
circuit wiring and has four 1/2” KO’s, one 3/4” KO and four Romex knockouts
with pry-out slots and strain clamps. Ballast and Junction Box are accessible
from below, no tools required. Ballast supplied is manufactured by
Advance Transformer CO, Universal Technologies or Lutron
Electronics.
TRIM: 6501 REFLECTOR
5. MOUNTING FRAME - Die-formed construction for maximum heat
dissipation and rust protection.
OPTICS:
6. REFLECTOR - Self-flanged .050” aluminum reflector with low iridescent
finish. Reflector provides 45-degree lamp-to-reflector image cutoff.
7. GROVE BAFFLE - Self-flanged one-piece aluminum with concentric rings.
A
8. LENS - Choice of either tempered clear, tempered fresnel, tempered
prismatic or tempered frosted lens fastened with two torsion springs for easy
re-lamping. ETL/UL listed for wet or damp location.
Min. Height = 5-3/8” (See trim heights for details)
Max. Height =5-1/2” (See trim heights for details)
B
Trim Aperture = 6-1/8”
C
Cut-out = 6-3/4”
D
Trim Outside Diameter = 7-3/8”
E
Width = 16”
F
Length = 12-1/2”
LISTING:
6 INCH
TYPE:
architectural C FL h o rizo n tal
Hh6PL
❏1x9
❏1x13
❏1x18
❏1x26
❏1x32
❏1x42
Energy Star Compliant fixtures ship
with electronic Energy Star
compliant ballasts.
PROJECT NAME:
- ITEM SELECTOR: (Please check the boxes below for the option desired)
WATTAGE*
1 LAMP
ETL/UL listed for through-branch circuit wiring and damp locations. Wet location
only with lens trims.
BALLAST
2 LAMPS
❏2x9
❏2x13
❏2x18
❏2x26
*See pages
154-167 for
base type
and wiring
diagrams.
VOLTAGE
❏ (E)Electronic
❏ (M)Magnetic
❏ (S)Energy Star
❏(DBL)
1
2
Dual Ballast
MVOLT
(120/277)
❏
❏ 120
❏ 277
❏ 347
EMERGENCY OPTIONS
TRIM TYPE & DESCRIPTION
REFLEC.
❏ EMG 750 (750 Lum.)
❏ EMG 1300 (1300 Lum.)
❏ INTG 750 (750 Lum.)
❏ ICE-1300 (1300 Lum.
❏ EMG-D-750 (750 Lum.)
❏ INTG-D-750 (750 Lum.)
❏ ICE-1300 (1300 Lum.)
❏ 6501 Reflector
❏ 6502 Baffle/Ref.
❏ 6503 Ref./Fres. Gls. Lns.
❏ 6504 Ref./Pris. Gls. Lns.
❏ 6505 Baffle/Fres. Gls. Lns.
❏ 6506 Baffle/Pris. Gls. Lns.
❏ 6507 Wall Wash
❏ 6508 Crossblade
❏ 6512 Baffle/Frost Gls. Lns.
❏ 6513 Baffle/Tem. Clr. Gls.
❏ CL
❏ WH
❏ SCH** ❏ P
❏ SHZ*
❏ WT
5.6
5.6
5.7
5.7
5.8
5.9
DIMMING
5.10
OTHER OPTIONS
❏ Adv-7
❏ Adv-10
❏ Lut-H (FDB)
3
❏ FUSE
❏ RIF
4
4
11
12
❏ 6 514 Ref./Frost Gls. Lns.
❏ 6515 Ref./Tem. Clr. Gls.
❏ 6516 Ref./Pris. Plas. Lns.
❏ 6517 Baf./Pris. Plas. Lns.
❏ 6518 Ref./Tem. Clr. Plas.
❏ 6519 Ref./Tem. Clr. Gls.
❏ 6509 Deco Glass Ring
❏ 6510 Double Ring
❏ 6511 Triple Ring
GLASS
❏ Blue
❏ Green
❏ Red
❏ Frost
(1=1X9W, 2X9W =Available only in Magnetic ) (2=S=Electronic Energy Star Ballast, available in 120V only) (3=Adv-7 not available on HH6PL-1x9, 2x9) (4=Adv-10 and Lut-H(FDB) are not available on HH6PL-1x9, 2x9, HH6PL-1x13, 2x13) (5=See page 154-167 for more details)
(6-EMG=Emergency battery pack w/ remote test switch) (7-INTG=Emergency battery pack w/ integral(reflector) test switch) (8-EMG-D=Emergency battery pack w/ remote test switch for damp location)
(9-INTG-D=Emergency battery pack w/ integral(reflector) test switch for damp location) (10-ICE=Emergency battery pack w/ remote test switch operating between -18ºC and 55ºC) (11-FUSE=Single slow-blow fuse) (12-RIF=Radio interference filter)
REFLECTOR
Specifications:
hh6PL
_____ - _____ - _______ - __________ - ______ - ______ - _____ - ____ - ____ - ____
Watt
ballast
voltage
emergency
options
trim type
Sample of Catalog Number: Hh6PL-1x32-e-MVOLT-EMG750-6501-CL-WH
116
❏W
❏ MB
BAFFLE
reflec.
baffle
ring
glass
CL
Clear
SHZ Satin Haze
(Low Iridescent)
WT Wheat
MB Black
W
White
baffle
WH White
P
Black
glass
Only available on XX09,
XX10 and XX11 series.
RING
WH Self-Flange White
Standard on all trims
SCH** Self-Flange Chrome
** Only available on XX01 CL
SHZ* Satin Haze
* Provided w/ satin haze ring only
*For custom baffle, reflector, trim ring, glass color and
lens options, please consult factory.
www.maxilume.com • tel 1-877-375-5555 • fax 1-877-375-3333
Submitting Agency:
Description:
HH6PL-1X32-E-MVOLT / 6507-CL-WH
Project:
Notes:
Cascade Periodontics
(1) F32TRT LAMP--BY OTHERS
MAXILUME
Architectural
6501-CL
REFlector finish:
CL, Wt, MB, SHZ, w
RING finish:
A= 5-1/2”
B= 7-3/8”
C= 1”
A= 5-1/2”
B= 7-3/8”
C= 1”
blue, red, green, frost
6510-CL*
double ring glass
A= 5-1/2”
B= 7-3/8”
C= 1”
baffle finish:
wh, p
CL, Wt, MB, SHZ, w
RING finish:
Wh, shz, sch
A= 5-1/2”
B= 7-3/8”
C= 1-1/2”
glass finish:
blue, red, green, frost
6511-CL*
triple ring glass
A= 5-1/2”
B= 7-3/8”
C= 1”
baffle finish:
wh, p
REFlector finish:
CL, Wt, MB, SHZ, w
RING finish:
RING finish:
Wh, shz, sch
Wh
glass finish:
*Also available in:
TEMPERED CLEAR PLASTIC (6519)
When ordering trims for INTG 750, INTG 1300 or INTG-D-750 emergency
options, place “INTG” at the end of the trim catalog number. E.g. 6501-WH-INTG
REFlector finish:
www.maxilume.com
A= 5-1/2”
B= 7-3/8”
C= 2-1/4”
architectural C FL h o riz o n tal O P TI C S
TEMPERED CEAR PLASTIC (6518)
A= 5-1/2”
B= 7-3/8”
C= 1-1/4”
glass finish:
bafFLE w/ tem. clear glass
A= 5-1/2”
B= 7-3/8”
C= 1”
CL, Wt, MB, SHZ, w
Wh, shz, sch
6513-WH
REFLECTOR w/ tem. clear glass
REFlector finish:
RING finish:
Wh
6515-WT
Wh
*Also available in:
wh, p
RING finish:
Wh
RING finish:
A= 5-1/2”
B= 7-3/8”
C= 1”
baffle finish:
6 INCH
RING finish:
CL, Wt, MB, SHZ, w
deco glass reflector
bafFLE w/ frosted gl. lens
A= 5-1/2”
B= 7-3/8”
C= 1”
A= 5-1/2”
B= 7-3/8”
6509-CL*
6512-WH
REFLECTOR w/ frosted gl. lens
CL, Wt, W, SHZ
Wh
prismatic PLASTIC LENS (6517)
6514-CL
REFlector finish:
RING finish:
RING finish:
prismatic PLASTIC LENS (6516)
REFlector finish:
wh, p
Wh
*Also available in:
Wh
*Also available in:
CL, Wt, MB, SHZ, w
A= 5-1/2”
B= 7-3/8”
C= 1”
baffle finish:
bafFLE w/ pris. glass lens
RING finish:
REFlector finish:
crossblade REFLECTOR
6506-WH
REFLECTOR w/ pris. glAsS lens
A= 5-1/2”
B= 7-3/8”
6508-CL
Wh
6504-CL
CL, Wt, MB, SHZ, w
Wh, sch, SHZ
RING finish:
Wh
REFlector finish:
RING finish:
bafFLE w/ fres. glASS lens
RING finish:
CL, Wt, MB, SHZ, w
Wh, p
6505-P
REFLECTOR w/ fres. glASS lens
REFlector finish:
A= 5-1/2”
B= 7-3/8”
C= 1”
baffle finish:
CL
6503-CL
CL, Wt, MB, SHZ, w
wall wash REFLECTOR
REFlector finish:
Wh, SCH, SHZ
REFlector finish:
6507-SHZ
baffle w/ REFLECTOR
A= 5-1/2”
B= 7-3/8”
CW
6” HORIZONTAL CFL OPTICS
6502-WH-CL
REFLECTOR
Type:
blue, red, green, frost
117
Submitting Agency:
Description:
HH6PL-1X32-E-MVOLT / 6507-CL-WH
Project:
Notes:
Cascade Periodontics
(1) F32TRT LAMP--BY OTHERS
BPHOTOMETRIC DATA I CFL I 6” DOWNLIGHTNG
Zonal Lumens Summary
Zone
0-300
0-400
0-600
0-900
90-1200
90-1300
90-1500
90-1800
0-1800
90°
80°
151
70°
302
60°
50°
453
40°
30°
604
10°
0°
11.3’
17.0’
RC
RW
12’
4
34.0’
Room Cavity Ratio
35.6
15.8
8.9
5.7
Distance to
Plane
Luminance Data (cd/sq.m)
%Fixt
43.1
66
96.5
100
0
0
0
0
100
Angle In Average
Degrees 00
450
550
650
750
850
20212
4956
872
610
1208
Coefficients of Utilization - Zonal Cavity Method
Effective Floor Cavity Reflectance 20% = PF
Beam Angle: 109°
8’
10’
%Lamp
26.8
41.1
60.1
62.2
0
0
0
0
62.2
Average
450
20212
4956
872
610
1208
Average
900
20212
4956
872
610
1208
22.6’
28.3’
Initial Nadir
Footcandles
Beam
Spread
BEAM DIA. MEASURED AT 10% OF NADIR F.C.
Zonal Lumen Summary
Zone
Lumens
0-10
10-20
20-30
30-40
40-50
50-60
60-70
70-80
80-90
45.13
169.26
243.79
244.69
236.3
87.81
28.93
5.15
3.24
0
1
2
3
4
5
6
7
8
9
10
80%
70% 50% 30% 10%
74
70
65
60
56
52
49
46
43
40
38
74
67
61
55
50
46
42
38
35
33
30
74
66
58
51
46
41
37
34
31
28
26
74
64
55
48
43
38
34
31
28
25
23
70%
70% 50% 30% 10%
72
68
63
59
55
51
48
45
42
39
37
RC - Ceiling Cavity Reflectance
72
66
60
54
50
45
41
38
35
32
30
72
64
57
51
45
41
37
34
31
28
26
72
63
55
48
42
38
34
30
28
25
23
50%
50% 30% 10%
69
64
58
53
48
44
40
37
34
32
29
69
62
55
50
45
40
36
33
30
28
26
69
61
53
47
42
37
33
30
27
25
23
30%
50% 30% 10%
66
61
56
51
47
43
39
36
34
31
29
66
60
54
49
44
40
36
33
30
27
25
66
59
52
46
41
37
33
30
27
25
23
10%
50% 30% 10%
64
59
54
50
46
42
38
35
33
31
28
64
58
53
47
43
39
35
32
30
27
25
64
57
51
46
41
37
33
30
27
25
23
0%
0%
62
56
50
44
40
35
32
29
26
24
22
Zonal Lumens Summary
Candle Power Distribution (Candelas)
Zone
0-300
0-400
0-600
0-900
90-1200
90-1300
90-1500
90-1800
0-1800
90°
80°
194
70°
388
60°
50°
582
40°
30°
10°
0°
RC
RW
Beam Angle: 110°
11.3’
5.1
34.0’
Distance to
Plane
Initial Nadir
Footcandles
17.0’
22.6’
28.3’
Room Cavity Ratio
20.4
11.5
7.3
Beam
Spread
BEAM DIA. MEASURED AT 10% OF NADIR F.C.
0
1
2
3
4
5
6
7
8
9
10
80%
70% 50% 30% 10%
74
70
65
61
56
52
49
46
43
40
38
74
67
61
55
50
46
42
38
35
33
30
74
66
58
51
46
41
37
34
31
28
26
74
64
55
48
43
38
34
31
28
25
23
Luminance Data (cd/sq.m)
%Fixt
43
66
96.5
100
0
0
0
0
100
70%
70% 50% 30% 10%
72
68
64
59
55
51
48
45
42
39
37
RC - Ceiling Cavity Reflectance
Angle In Average
Degrees 00
450
550
650
750
850
26019
6425
1121
814
1208
Average
450
26019
6425
1121
814
1208
Average
900
26019
6425
1121
814
1208
Zonal Lumen Summary
Zone
Lumens
0-10
10-20
20-30
30-40
40-50
50-60
60-70
70-80
80-90
58.01
217.69
313.7
314.8
304.23
113.13
37.47
6.69
3.78
72
66
60
54
50
45
41
38
35
32
30
72
64
57
51
45
41
37
34
31
28
26
72
63
55
48
42
38
34
30
28
25
23
50%
50% 30% 10%
69
64
58
53
48
44
40
37
34
32
29
69
62
55
50
45
40
36
33
30
28
26
69
61
53
47
42
37
33
30
27
25
23
30%
50% 30% 10%
66
61
56
51
47
43
39
36
34
31
29
66
60
54
49
44
40
36
33
30
27
25
66
59
52
46
41
37
33
30
27
25
23
10%
50% 30% 10%
64
59
54
50
46
42
38
35
33
31
28
64
58
53
47
43
39
35
32
30
27
25
64
57
51
46
41
37
33
30
27
25
23
0%
0%
62
56
50
44
40
35
32
29
26
24
22
Zonal Lumens Summary
Candle Power Distribution (Candelas)
Zone
0-300
0-400
0-600
0-900
90-1200
90-1300
90-1500
90-1800
0-1800
90°
80°
282
70°
565
60°
50°
847
40°
30°
1129
0°
10°
Lumens
857.26
1315.19
1922.41
1992.4
0
0
0
0
1992.4
%Lamp
26.8
41.1
60.1
62.3
0
0
0
0
62.3
Luminance Data (cd/sq.m)
%Fixt
43
66
96.5
100
0
0
0
0
100
Angle In Average
Degrees 00
450
550
650
750
850
37856
9361
1619
1220
1812
Average
450
37856
9361
1619
1220
1812
Average
900
Coefficients of Utilization - Zonal Cavity Method
Effective Floor Cavity Reflectance 20% = PF
RC
RW
Beam Angle: 110°
4’
6’
8’
10’
12’
66.6
29.7
16.7
11
7.4
11.3’
17.0’
22.6’
28.3’
34.0’
Distance to
Plane
Initial Nadir
Footcandles
Beam
Spread
0
1
2
3
4
5
6
7
8
9
10
80%
70% 50% 30% 10%
74
70
65
61
56
52
49
46
43
40
38
74
68
61
55
50
46
42
38
35
33
30
74
66
58
51
46
41
37
34
31
28
26
74
64
55
48
43
38
34
31
28
25
23
RC - Ceiling Cavity Reflectance
Candela Tabulation
0
1
3
5
7
9
11
13
15
17
19.5
22.5
25.5
29
33
37.5
42.5
47.5
55
65
75
85
90
0
733
737
742
748
753
757
760
764
771
776
775
756
726
689
626
542
416
283
70
9
4
2
0
37856
9361
1619
1220
1812
70%
70% 50% 30% 10%
72
68
64
59
55
51
48
45
42
39
37
72
66
60
54
50
45
41
38
35
32
30
72
64
57
51
45
41
37
34
31
28
26
72
63
55
48
42
38
34
30
28
25
23
50%
50% 30% 10%
69
64
58
53
48
44
40
37
34
32
29
69
62
56
50
45
40
36
33
30
28
26
69
61
53
47
42
37
33
30
27
25
23
30%
50% 30% 10%
66
61
56
51
47
43
39
36
34
31
29
66
60
54
49
44
40
36
33
30
27
25
66
59
52
46
41
37
33
30
27
25
23
Zone
Lumens
0-10
10-20
20-30
30-40
40-50
50-60
60-70
70-80
80-90
84.37
316.58
456.31
457.93
442.49
164.73
54.54
9.78
5.68
10%
50% 30% 10%
64
59
54
50
46
42
38
36
33
31
28
64
58
53
47
43
39
35
32
30
27
25
test no.: LLI 0509-15P-P
spacing criteria: 1.26
Zonal Lumen Summary
Total Luminaire Efficiency =
20°
0
570
573
577
582
586
589
591
594
599
604
602
587
565
535
487
421
323
220
54
7
3
2
0
RW - Wall Reflectance
hh6pl-1x42-e-6501-cl / bhhr6pl-1x42-e-6501-cl / hhr6pl-1x42-e-6501-cl / hhj6pl-1x42-e-6501-cl/ hh6pl-1x42-e-6501-cl
lamp: GE F42TBX/841/A/ECO
lumens: 3200
total luminaire efficiency: 62.3%
Room Cavity Ratio
PHOTOMETRIC DATA C F L D O W NL I G H T
45.8
BEAM DIA. MEASURED AT 10% OF NADIR F.C.
130
%Lamp
26.8
41.1
60.1
62.3
0
0
0
0
62.3
Coefficients of Utilization - Zonal Cavity Method
Effective Floor Cavity Reflectance 20% = PF
4’
6’
8’
10’
0
1
3
5
7
9
11
13
15
17
19.5
22.5
25.5
29
33
37.5
42.5
47.5
55
65
75
85
90
test no.: LLI 0509-15P-P
spacing criteria: 1.26
Total Luminaire Efficiency =
20°
12’
Lumens
589.4
904.2
1321.56
1369.5
0
0
0
0
1369.5
Candela Tabulation
RW - Wall Reflectance
hh6pl-1x32-e-6501-cl / bhhr6pl-1x32-e-6501-cl / hhr6pl-1x32-e-6501-cl / hhj6pl-1x32-e-6501-cl/ hh6pl-1x32-e-6501-cl
lamp: GE F32TBX/841/A/ECO
lumens: 2200
total luminaire efficiency: 62.2%
776
test no.: LLI 0509-15P-P
spacing criteria: 1.26
Total Luminaire Efficiency = 62.2%
20°
4’
6’
Lumens
458.19
702.88
1026.99
1064.31
0
0
0
0
1064.31
CW
MAXILUME
Architectural
hh6pl-1x26-e-6501-cl / bhhr6pl-1x26-e-6501-cl / hhr6pl-1x26-e-6501-cl / hhj6pl-1x26-e-6501-cl/ Ch6pl-1x26-e-6501-cl
lamp: GE F26TBX/841/A/ECO
lumens: 1710
total luminaire efficiency: 62.2%
Candle Power Distribution (Candelas)
Type:
64
57
51
46
41
37
33
30
27
25
23
0%
0%
62
56
50
44
40
35
32
29
26
24
22
RW - Wall Reflectance
www.maxilume.com • tel 1-877-375-5555 • fax 1-877-375-3333
Candela Tabulation
0
1
3
5
7
9
11
13
15
17
19.5
22.5
25.5
29
33
37.5
42.5
47.5
55
65
75
85
90
0
1066
1072
1079
1088
1095
1101
1105
1111
1121
1129
1127
1100
1056
1002
911
788
605
412
102
13
6
3
0
Submitting Agency:
Description:
WC 2 17 MVOLT GEB10IS
Project:
Notes:
Cascade Periodontics
(2) F17T8 LAMPS--BY OTHERS
Type:
D2
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — For wall or ceiling mounting - vertical or horizontal. Ideal for stairwells, corridors,
lavatories or any utility application. Certain airborne contaminants can diminish integrity of
acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.
Type
Commercial Wall Bracket
CONSTRUCTION — Easy maintenance design for individual or tandem mounting. For row mounting,
order RMT option.
WC
Heavy-duty code grade steel. Metal parts are die-formed.
Finish: Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance.
Standard finish is high-gloss, high reflectivety, baked white polyester (architectural black available).
OPTICS — Available with high performance A12 pattern clear acrylic or low brightness matte white opal
acrylic. Front metal fascia eliminates direct illumination. Provides up/down distribution.
ELECTRICAL — AWM, TFN or THHN wire used throughout, rated for required temperatures. UL/CSA
Ballast disconnect provided where required to comply with US and Canadian codes.
T5 and T8
2', 3' or 4' Lengths
1 or 2 Lamps
INSTALLATION — End caps spring-loaded for easy diffuser removal.
LISTINGS — UL Listed to US and Canadian safety standards. Optional: Mexico NOM.
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Note: Specifications subject to change without notice.
Specifications
Length: 24 (609), 36 (914) or 48 (1218)
Width: 4-5/8 (118)
Depth: 4-9/16 (116)
Weight: 14 lbs (6.3 kg)
All dimensions are inches (millimeters) unless otherwise indicated.
ORDERING INFORMATION
Example: WC 2 32 120 MVOLT GEB10IS
For shortest lead times, configure product using standard options (shown in bold).
WC
Series
WC
All purpose
wall bracket
Number of lamps Lamp type
Diffuser type
Voltage
Options
1
2
(blank) Matte white opal acrylic
A12
#12 pattern acrylic
FAC
Matte white opal acrylic
with front metal fascia
FA12
#12 pattern acrylic with
front metal fascia
120
277
347
MVOLT
CO
S1
17
25
32
14T5
21T5
28T5
24T5HO
39T5HO
54T5HO
17W T8 (24")
25W T8 (36")
32W T8 (48")
14W T5 (24")
21W T5 (36")
28W T5 (48")
24W T5HO (24")
39W T5HO (36")
54W T5HO (48")
Grounded convenience outlet, 120V only (bottom right)1
Pull-chain switch; installed bottom left; on/off operation of
all lamps only (120V only)1
GEB10IS Electronic ballast, ≤ 10% THD, instant-start
GEB10PS T5 and T8 electronic ballasts, ≤ 10% THD, programmed start
MB
Architectural black finish
RMT
Row mount2
CSA
CSA Certified.
EL
Emergency battery pack (nominal 300 lumens; see Life
Safety Section)3
Notes
1 For optional locations, consult factory.
2 Includes continuous row joiner band. Not available with CSA;
models requiring CSA labeling ship standard with joiner band.
Cannot field install.
3 Not available on 2ft.
FLUORESCENTWC
Submitting Agency:
Description:
WC 2 17 MVOLT GEB10IS
Project:
Notes:
Cascade Periodontics
(2) F17T8 LAMPS--BY OTHERS
Type:
D2
WC Wall Bracket, All Purpose
MOUNTING DATA
DIMENSIONS
All dimensions are inches (millimeters) unless otherwise indicated.
C = 7/8 (22) Dia. K.O.
D = 11/16 (18) Dia. K.O.
E = 2(51) Dia. K.O.
G = 1-1/8 (29) Dia. K.O.
PHOTOMETRICS
Calculated using the zonal cavity method in accordance with IESNA LM41 procedure. Vertical and horizontal illuminance is calculated with fixture mounting 7' above floor. Reflectances 80/50/20%. Full photometric
data available upon request.
WC 2 32
Report LTL 5736
Initial point illuminance on wall and horizontal work surface (fc)
X and Y coordinates are on 12" centers.
X
9
8
7
6
Vert. 5
4
3
2
1
Y
1
2
3
4
5
Horiz. 6
7
8
9
10
11
12
13
A
3
3
2
2
2
2
2
1
1
B
4
4
3
3
2
2
2
2
2
C
6
6
3
5
4
3
2
2
2
D
11
18
E
15
31
F
16
33
G
15
31
H
11
18
16
6
4
3
2
2
I
6
6
3
5
4
3
2
2
2
J
4
4
3
3
3
2
2
2
2
K
4
3
2
2
2
2
2
1
1
16
6
3
3
2
2
28
8
4
3
2
2
30
9
4
3
2
2
28
8
4
3
2
2
6
6
6
7
6
6
5
5
5
4
3
3
2
7
7
7
7
7
7
6
5
5
4
3
3
2
8
8
8
8
8
7
6
6
5
4
4
3
3
9
10
10
10
9
9
7
6
6
4
4
4
3
10
11
11
11
10
9
7
7
6
5
4
4
3
10
11
11
11
10
9
7
7
6
5
4
4
3
10
11
11
11
10
9
7
7
6
5
4
4
3
9
10
10
10
9
9
7
6
6
4
4
4
3
8
9
9
9
9
8
7
6
6
4
4
4
3
6
7
7
8
7
7
6
5
5
4
3
3
2
5
6
7
7
7
6
5
5
5
4
3
3
2
WC
FLUORESCENT:
One Lithonia Way Conyers, GA 30012
Phone: 800-858-7763
Fax: 770-929-8789
www.lithonia.com
© 2000-2013 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/31/2013
BREWMASTER®
FP10/20 – Pulley Unit
FP1280 – Motor
INSTALLATION REQUIREMENTS:
It is recommended that each fan and motor assembly have 3/4˝ plywood backing secured to a structural member for
adequate support. Each fan assembly consists of 1 motor and 1 pulley/blade assembly. Motor unit can operate a
maximum of 4 pulley/blade assemblies—will result in reduced rpm. Not recommended for sound-sensitive areas. Call
technical support for more information.
ELECTRICAL REQUIREMENTS:
120 VAC, 60 Hz, 15 amp circuit, 15 amp electrical feed, centered under motor unit.
MOTOR SPECS:
FK2100 motor is designed for optimal performance with this fan. 220 VAC, 50 Hz export version available.
BLADES:
Blade sets consist of 2 blades—sold separately. Blades are available in reversible oak/walnut, cherrywood, rosewood,
natural palm and woven bamboo. See our catalog or visit www.fanimation.com for additional information on these blade
options.
Note: Fan speeds will vary according to blade set—material, shape and size of blade. In general, smaller blades
will turn faster than bigger ones and narrower blades will turn faster than wider ones.
CONTROL OPTIONS:
TR20WH hand-held remote control with wall mount is included. Push button remote control has 3 fan speeds, infinite
light levels, reverse and off button. Instructions are provided with each control.
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available. To be mounted on motor switch cap housing only. Installation
instructions are provided with each lighting fitter and light kit. See our catalog or visit www.fanimation.com for available
lighting options.
LOCATION USE:
Fan is rated for dry locations only. Damp location rated with use of black finish fan components and BMD4A blade set.
BREWMASTER®
Short Neck Fan Assembly
5¾˝ from ceiling to
center of double pulley
NOTE: Pulley height
may be adjusted
*15˝
Short Fan Assembly FP10**
*NOTE: All other dimensions are identical to
FP20 Long Fan Assembly
*17½˝
**Insert Finish Codes
NOTE: Motor may be mounted at
either end or in the middle.
Available Finishes
AB
Antique brass
BL
Black
PW
Pewter
Ordering Information (Items Sold Separately)
Item
Motor Unit with Long Neck Fan Assembly
Fan Speed (RPM)
High
Medium
Low
OneFP10**
TwoFP10**
ThreeFP10**
FourFP10**
FP10**
One Motor Unit
FP1280**
Three-speed, reversible
1-splice/hardware kit
TR20WH remote control
1-mounting hardware bag
FP1022
Reversible oak/walnut
FP1026
Cherrywood
FP1030
Rosewood (glossy)
Short Fan
Assembly
93
75
104
60
46
89
46
35
Blade Sets
(sold separately)
28
See catalog or www.
fanimation.com for
additional blade options
38
NOTE: The RPM’s are approximate and may vary by
fan and application.
Description
1-short pulley assembly
30 ft. of 3/8˝ belt
2-traditional blade holders
2-wood blade holders
4-hardware bags
125
76
Catalog No.
**Insert Finish Codes
BREWMASTER®
Long Neck Fan Assembly
Long Fan Assembly - FP20**
A
Overall Length
14´ Max - 4´ Min
B
Fan Base Length
12˝
C
Fan Base Width
4˝
D
Overall Drop
26˝
E
Blade Sweep
56˝*
F
Motor Base Diameter
8˝
G
Motor Assembly Height
10˝
†
Motor Unit FP1280**
FK-2100 Motor: 120 volt, 60 Hz, 0.90 amps. Ceiling mount.
Remote Control Receiver included (in Switch Cap).
Not recommended for sound-sensitive areas.
Finishes: available in antique brass, black and pewter
C
**Insert Finish Codes
*Wood Blades (22˝ palm or bamboo - 50˝)
B
5¾˝ from ceiling to
center of double pulley
NOTE: Pulley height
may be adjusted
†
Maximum distance between motor and fan pulley
is 14´, maximum distance between two fan pulley
assemblies is 13½´
A
D
F
E
G
NOTE: Motor may be mounted at
either end or in the middle.
Ordering Information (Items Sold Separately)
Item
Motor Unit with Long Neck Fan Assembly
Fan Speed (RPM)
High
Medium
Low
OneFP20**
TwoFP20**
ThreeFP20**
FourFP20**
125
93
75
104
60
46
89
46
35
76
38
28
NOTE: The RPM’s are approximate and may vary by
fan and application.
Catalog No.
Description
FP20**
1-long pulley assembly
30 ft. of 3/8˝ belt
2-traditional blade holders
2-wood blade holders
4-hardware bags
One Motor Unit
FP1280**
Three-speed, reversible
1-splice/hardware kit
TR20WH remote control
1-mounting hardware bag
Blade Sets
(Order Separately)
FP1022
Reversible oak/walnut
FP1026
Cherrywood
FP1030
Rosewood (glossy)
Long Fan Assembly
See catalog or www.
fanimation.com for
additional blade options
**Insert Finish Codes
Submitting Agency:
Type:
Description:
AFN DB EXT
Project:
Notes:
Cascade Periodontics
LAMPS INCLUDED
G
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — Provides a minimum of 90 minutes illumination for the rated wattage upon loss of
AC power. Ideal for applications requiring low-profile, attractive emergency lighting.
CONSTRUCTION — Compact, low-profile, architectural design with die-cast aluminum housing. Available finishes are texturized polyester powder coat paint in brushed nickel, white, black and dark bronze.
All finishes can be painted in the field to match the wall color of choice.
U.S. Patent No. D468,046.
OPTICS — Standard optics provided with two 6W wedge-base xenon lamps offer 55 percent more light
output than standard incandescent lamps. Patent-pending reflector/refractor design features superior
vac-metalized, die-casted reflectors; and multi-faceted, highly transmissive refractor that significantly
improve photometrics.
Forward throw (FWD) option optics provided with two high-brightness white LEDs (10.8W total),
projecting an NFPA-101 compliant path 3' wide and 28' forward, when mounted 8-1/2' AFF. The typical
life of the LED lamp is 10 years.
All light sources meet requirements for NEC 700.16.
Dual-voltage input capability (120/277V).
Edge connectors on printed circuit board ensure long-term durability.
Universal J-box mounting pattern.
Low-profile, integrated test switch/pilot light located below the lens.
Easily visible green status indicator.
Rigid conduit entry provision on top of the unit.
Battery: Sealed, maintenance-free lead-calcium battery provides 12W rated capacity. Nickel-cadmium
battery with Premium and Exterior option packages.
Automatic 48-hour recharge after a 90-minute discharge.
Low-voltage disconnect prevents excessively deep discharge that can permanently damage the battery.
Single-circuit battery connection.
ELECTRICAL — Current-limiting charger maximizes battery life and minimizes energy consumption.
Provides low operating costs.
Short-circuit protection — current-limiting charger circuitry protects printed circuit board from shorts.
Thermal protection senses circuitry temperature and adjusts charge current to prevent overheating
and charger failure.
Thermal compensation adjusts charger output to provide optimum charge voltage relative to ambient
temperature.
Regulated charge voltage maintains constant-charge voltage over a wide range of line voltages. Prevents
over/undercharging that shortens battery life and reduces capacity.
Filtered charger input minimizes charge voltage ripple and extends battery life.
AC/LVD reset allows battery connection before AC power is applied and prevents battery damage from
deep discharge.
Brownout protection is automatically switched to emergency mode when supply voltage drops below
80 percent of nominal.
EXT option package includes 20-minute time delay for supplemental lighting during HID startup.
Self-diagnostics (PREM and EXT option packages)
Patented Electronics - U.S. Patent No. D468,046 and 6,502,044.
ORDERING INFORMATION
Type
®
Die-Cast Architectural Emergency Light
AFN
White
Brushed
Nickel
Single multi-chromatic LED indicator to display two-state charging, test activation and three-state
diagnostic status.
Test switch provides manual activation of 30-second diagnostic testing for on-demand visual inspection.
Self-diagnostic testing for five minutes every 30 days and 30 minutes every six months.
Diagnostic evaluation of lamp, AC to DC transfer, charging and battery condition. Continuously monitors
AC functionality.
Postpone automatic test initiates eight hour delay of an automatic test by activating the manual test
switch.
LISTINGS — UL Listed. Wet locations and cold temperature (EXT) listed. Damp location (PREM) listed.
Wet location (WL) option available with PREM package. Meets UL 924, NFPA 101, NFPA 70-NEC and OSHA
illumination standards. UL labeled.
WARRANTY — 3-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Note: Specifications subject to change without notice.
Example: AFN W EXT
For shortest lead times, configure product using bolded options.
F
AFN
Series
AFN
Finish
AFFINITY Series die-cast architectural
emergency lighting
W
B
BN
DB
Options
White
Black
Brushed nickel
Dark bronze
(blank) Features lead calcium battery
PREM
Features ni-cad battery, self-diagnostics and damp location 32°F to 122°F (0° C to 50°C)
EXT
Features high-temperature ni-cad battery listed from 0°F to 122°F (-18°C to 50°C), self-diagnostics,
time delay; listed for cold weather, damp and wet location
FWD
Forward throw optics with LED light source, 10.8W
WL
Wet location with time delay listed from 32°F to 122°F (0°C to 50°C) 1
Accessories: Order as separate catalog number. 2
ELA AFNR DB
EMERGENCY
Remote fixture (less batteries and electronics) to be powered by 6V battery
equipment as part of an emergency lighting system (listed from -40°F to 122°F;
-40°C to 50°C), BN, W, B finishes available.
Notes
1 WL only available with PREM option package.
2 See spec sheet ELA-OMC-ELA-AFNR.
AFN
Submitting Agency:
Type:
Description:
AFN DB EXT
Project:
Notes:
Cascade Periodontics
LAMPS INCLUDED
G
AFN Affinity® Die-Cast Architectural Emergency Light
MOUNTING
SPECIFICATIONS
All dimensions are inches (centimeters).
Shipping weight: 3.5 lbs. (1.59 kgs.)
ELECTRICAL: Primary Circuit
Type
Volts
120
277
120
277
120
277
AFN
AFN PREM
AFN EXT
AC Input
Amps
.11
.12
.15
.14
.23
.25
Watts
1.1
1.3
1.4
1.4
211
351
Output
volts
Watts output
1-1/2 hrs.
6
12
6
12
6
12
2-3/4
(6.9)
4-3/8
(18.6)
4-3/8
(18.6)
9-1/2
(24.1)
9-1/2
(24.1)
9-1/2
(24.1)
BATTERY: Sealed Lead-Calcium
Voltage
Shelf
life2
Typical
life2
Maintenance4
6
12 months
5 - 7 years
none
6-1/2
(16.5)
Optimum
temperature3
60°– 90°F
(16°– 32°C)
6-1/2
(16.5)
Test switch status
indicator
FIXTURE PERFORMANCE
Center-to-Center Spacing on a 3-foot
Path of Egress
BATTERY: Nickel-Cadmium
Voltage
Shelf
life2
Typical
life2
Maintenance4
6
3 years
7 - 9 years
none
Optimum
temperature3
32°– 122°F
(0°– 50°C)
26 ft
.
1 FC average
Notes
1 EXT provided with battery heater.
0.1 FC min.
2 At 77°F (25°C).
3 Optimum ambient temperature range where unit will provide capacity for 90 minutes. Higher and lower
temperatures affect life and capacity. See option packages for expanded temperature ranges. Consult factory
for detailed information.
3 ft.
4 All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and
tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform
the required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.
Center-to-Center Spacing on a 6-foot
Path of Egress
21 ft.
1 FC average
0.1 FC min.
6 ft.
AFFINITY® FWD
SPACING GUIDE
Xenon
Lamp
Center-to-Center
Spacing
Path of Egress
3'-wide
26'
Path of Egress
6'-wide
1 FC average
0.1 FC min.
8.5'
21'
20'
NOTE: Meets Life Safety Code standard minimum illuminance of 0.1 FC and average illuminance
of 1.0 FC. Assumes open space with no obstructions, mounting height: 8.5', ceiling height: 9', and
reflectances: 80/50/20.
6'
3'
28'
AFN
EMERGENCY:
One Lithonia Way, Conyers, GA 30012 Phone: 800-334-8694 Fax: 770-981-8141 www.lithonia.com
© 2003-2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/28/14
Submitting Agency:
Description:
HOLOPHANE 24I-42CFL-12-L-K-2-HK
Project:
Notes:
Cascade Periodontics
(1) F42TRT LAMP--BY OTHERS
Type:
H
Submitting Agency:
Description:
HOLOPHANE 24I-42CFL-12-L-K-2-HK
Project:
Notes:
Cascade Periodontics
(1) F42TRT LAMP--BY OTHERS
Type:
H
Submitting Agency:
Description:
10CRM4 2 32 WHR 20/80 SBL 4FT R4 120
GEB10 SCT F2/48 LP841 C210 ACG
Project:
Notes:
Cascade Periodontics
4' LENGTH; LAMPS INCLUDED
Type:
L4
Type: ________________________
Cerra 10 I/D
Project: ______________________
Indirect-Direct T8
SCEP Option
Suspended
S P E C I F I C AT I O N S
________
_______
________
________
________
________
________
________
________
10CRM4
________
________
________
________
________
_____
________
________
_____________________
LAMPING OPTIONS
10CRM4 - 1
10CRM4 - 2
10CRM4 - 3
2 5⁄8”
2 5⁄8”
10”
2 5⁄8”
10”
10”
SPECIFICATIONS
Construction
Nominal 10” x 3” crescent housing is formed from
one-piece cold-rolled steel. Flat end plate standard.
Sculptured die-cast aluminum end cap is optional.
Reflectors
Die-formed highly reflective white or specular
reflector.
fixture wires. For special circuiting or wire gauge,
consult factory. Plug-in electrical connectors
included. UL and C-UL listed.
Shielding
SSB—Parabolic aluminum baffle with semi specular
finish. SBL—Steel straight blade baffle.
PPL—Perforated steel straight blade baffle.
WPB—Parabolic aluminum baffle with white finish.
Luminaire Length
4’, 8’, and 12’ lengths in a single section for nominal
suspension spacing of 4’, 8’, and 12’. For total
luminaire length, add 1⁄16” for each flat end plate
or 4” for each sculptured end cap. Using internal
joiners, 4’, 8’, and 12’ sections can be joined to form
longer length luminaires.
Finish
Fine-textured, white or aluminum polyester
powder paint. Custom colors available,
consult factory.
Electrical
Specify 120V, 277V or 347V. Pre-wired with 16AWG
CATALOG NUMBER
Examples:
10CRM4 2 32 WHR SSB 40FT R12 277 GEB10 DCT LP835 F1/18 C210 SCEP — 10CRM4 3 32 20/80 PPL 32FT R8 277 GEB10 1SE EL DCT LP835 F1/21 C110
_______
________
Luminaire # of
Lamps
10CRM4
in
Cross
Section
_______
__________
__________
_________
_________
__________
_________
__________
Lamp Type
Distribution1
Shielding
Baffle
Ballast Type
WHR White Reflector
(Standard)
SPRSpecular
40/60 40% Up, 60% Down
20/80 20% Up, 80% Down
0/100 0% Up, 100% Down
CLI2 Center Lamp Isolator
(Blank) No
diffuser
OPD Standard
Brightness
Diffuser
SSB
SBL
Maximum
Section
Length
Voltage
32
Luminaire
Row
Length
120
277
347
GEB10 <10% THD Electronic
ADEZ3 Advance Mark 10 dim
DMHL3D3 Lutron Hi-Lume dim
ADZT3Advance Mark 7 0-10V dim
32W T8
1
2
3
__________
# of
Emergency
Modules
(Blank)None
1SE
1 section
2SE 2 sections
XSE X sections
Notes:
Semi specular
White steel
blade
X FT
PPLWhite
(4’ increments)
perforated
steel baffle
WPB White Baffle
(pre-finished
or painted)
________________
_________
________________
______________ ______________
Emergency
Type4
Switching
Lamp Color
Mounting Type
SCTSingle
circuit
DCTDual
circuit
L/LP No lamp
L/LPENo lamp. Wired
for energy saving
lamps.
LP830 3000K 80+ CRI
LP835 3500K 80+ CRI
LP841 4100K 80+ CRI
F1/
(Blank)None
ECEmergency
circuit
EL3 Emergency
battery pack
EN3Emergency
battery pack
w/night light
circuit
1 Refer to photometric test for exact distribution
2 Available with 3-lamp cross section only
3 Not available in 347V
/
T-bar ceiling (universal
mounting bracket)
F1A/ T-bar ceiling (UMB with
integrated J-box)
F2/ Hard ceiling (horizontal
J-box)
F3/
Rigid stem
Reference Lamp Chart on
website or consult factory
for other options.
Overall
Suspension
1212”
1515”
1818”
2121”
2424”
XXXX”
Overall
suspension is
measured from
ceiling to bottom
of luminaire.
4 EL and EC are installed in last 4’ of luminaire
sections. Separate feed required unless ELS
or ELS2 is specified
R4
R8
R12
4’ section(s)
8’ section(s)
12’ section(s)
Reference Ballast Wizard on website
or consult factory for other options.
______________
_________________________________
Finish
Options
C110Painted
aluminum (low
gloss)
C210 White white
(fine-textured
low gloss)
C099 Custom finish
ACG
BLK
Adjustable cable grippers
Black cord, cord manager and canopy (not
available with F3)
CP
Chicago plenum (available with F1A only)
DL
Damp location label
DU
Dust cover
ELH
Emergency through wiring w/separate feed
ELS
Emergency through wiring w/single feed,
shared neutral
ELS2
Emergency through wiring w/single feed,
separate neutrals
GLR
Fusing (fast blow)
GMF
Fusing (slow blow)
MCS
Matching feed canopy at support
NEPP5D nLight enabled control module per row/zone
NYC
New York City code
OJB
Offset junction box
SCEP Sculptured end cap
SLP
Sloped ceiling (for 10-45°, must be specified
with F2, ACG and OJB options)
XXXX Integrated sensor; choose options and obtain
code on page 2
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: techsupport@peerlesslighting.com • PeerlessLighting.com
© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Cerra” are registered trademarks of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx
10CRM4 Cerra 10 I/D
Indirect-Direct T8
1
Submitting Agency:
Description:
10CRM4 2 32 WHR 20/80 SBL 4FT R4 120
GEB10 SCT F2/48 LP841 C210 ACG
Project:
Notes:
Cascade Periodontics
4' LENGTH; LAMPS INCLUDED
Cerra 10 I/D
Type:
L4
Type: ________________________
Project: ______________________
Indirect-Direct T8
Suspended
10CRM4
INTEGRATED NLIGHT MICRO SENSOR
Determine the appropriate sensor type, network type and sensor power source for your application. Enter the code in the Options section of the Catalog Number.
EXAMPLE: PDT1
Network Type & Sensor Power Source (choose one)
Sensor Type (choose one)
ADC
nLight model
nES ADCX
Daylight Dimming
Specify 0-10V dimming ballast
No occupancy sensing
PDT
nLight model
nES PDT7 ADCX
Daylight Dimming and/or Occupancy Detection
Specify 0-10v dimming ballast for daylight dimming
Specify fixed-output ballast for occupancy detection only
(daylight dimming disabled)
1*
nLight-Enabled (Network-Ready) with Luminaire-Integrated Power Pack
10’ Cat-5e cable and splitter provided
2
Standalone Operation (No Networking) with Luminaire Integrated Power Pack
No Cat-5e cable provided
3*
nLight-Enabled (Network-Ready) with Remote nLight Power Pack or nPanel
10’ Cat-5e cable and splitter provided
Order required remote nLight Power Pack or nPanel
separately through nLight (Acuity Brands Controls)
For more information about the Integrated nLight Micro Sensor, its capabilities and options, download the PDF guide at: PeerlessLighting.com/nLight-Sensor-Guide
*nLight-Enabled (network-ready) options include one RJ-45 connector on the luminaire and 10’ of Cat-5e cable and a splitter to control the entire luminaire row (depending on
wattage/voltage limitations). The Cat-5e cable drop is located in the same section as the sensor. For multiple zones, please contact techsupport@peerlesslighting.com.
WEIGHTS & SUPPORT SPACING
Suspension spacing equals section length. Default location shown. Consult factory for stem mounting suspension spacing and alternate locations.
STANDARD SECTIONS
Key:
• Support or feed location
4’-0 3⁄8”
28 LBS
⁄16” standard flat end plates
4” optional sculptured end plates
1
4’-0 1⁄2” O.A.
8’-0 1⁄8”
48 LBS
8’-0 1⁄4” O.A.
12’-0”
68 LBS
12’-0 1⁄8” O.A.
PLAN VIEW
CONFIGURATIONS
Cast corner and tenon connectors available for suspended configurations.
Reference Pattern Connector Guide for additional details.
PHOTOMETRICS
Actual performance may differ as a result of end-user environment and application.
1-LAMP T8
91.9% efficiency
2619 delivered lumens
2-LAMP T8
91.2% efficiency
5199 delivered lumens
3-LAMP T8
90.7% efficiency
7759 delivered lumens
66.6% up / 33.4% down
62.9% up / 37.1% down
61.9% up / 38.1% down
2-LAMP T8
40/60 DISTRIBUTION
65.4% efficiency
3730 delivered lumens
2-LAMP T8
20/80 DISTRIBUTION
58.5% efficiency
3332 delivered lumens
2-LAMP T8
0/100 DISTRIBUTION
54.9% efficiency
3132 delivered lumens
36.2% up / 63.8% down
18.8% up / 81.2% down
0.9% up / 99.1% down
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: techsupport@peerlesslighting.com • PeerlessLighting.com
© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Cerra” are registered trademarks of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx
10CRM4 Cerra 10 I/D
Indirect-Direct T8
2
Submitting Agency:
Description:
10CRM4 2 32 WHR 20/80 SBL 8FT R8 120
GEB10 SCT F2/48 LP841 C210 ACG
Project:
Notes:
Cascade Periodontics
8' LENGTH; LAMPS INCLUDED
Type:
L8
Type: ________________________
Cerra 10 I/D
Project: ______________________
Indirect-Direct T8
SCEP Option
Suspended
S P E C I F I C AT I O N S
________
_______
________
________
________
________
________
________
________
10CRM4
________
________
________
________
________
_____
________
________
_____________________
LAMPING OPTIONS
10CRM4 - 1
10CRM4 - 2
10CRM4 - 3
2 5⁄8”
2 5⁄8”
10”
2 5⁄8”
10”
10”
SPECIFICATIONS
Construction
Nominal 10” x 3” crescent housing is formed from
one-piece cold-rolled steel. Flat end plate standard.
Sculptured die-cast aluminum end cap is optional.
Reflectors
Die-formed highly reflective white or specular
reflector.
fixture wires. For special circuiting or wire gauge,
consult factory. Plug-in electrical connectors
included. UL and C-UL listed.
Shielding
SSB—Parabolic aluminum baffle with semi specular
finish. SBL—Steel straight blade baffle.
PPL—Perforated steel straight blade baffle.
WPB—Parabolic aluminum baffle with white finish.
Luminaire Length
4’, 8’, and 12’ lengths in a single section for nominal
suspension spacing of 4’, 8’, and 12’. For total
luminaire length, add 1⁄16” for each flat end plate
or 4” for each sculptured end cap. Using internal
joiners, 4’, 8’, and 12’ sections can be joined to form
longer length luminaires.
Finish
Fine-textured, white or aluminum polyester
powder paint. Custom colors available,
consult factory.
Electrical
Specify 120V, 277V or 347V. Pre-wired with 16AWG
CATALOG NUMBER
Examples:
10CRM4 2 32 WHR SSB 40FT R12 277 GEB10 DCT LP835 F1/18 C210 SCEP — 10CRM4 3 32 20/80 PPL 32FT R8 277 GEB10 1SE EL DCT LP835 F1/21 C110
_______
________
Luminaire # of
Lamps
10CRM4
in
Cross
Section
_______
__________
__________
_________
_________
__________
_________
__________
Lamp Type
Distribution1
Shielding
Baffle
Ballast Type
WHR White Reflector
(Standard)
SPRSpecular
40/60 40% Up, 60% Down
20/80 20% Up, 80% Down
0/100 0% Up, 100% Down
CLI2 Center Lamp Isolator
(Blank) No
diffuser
OPD Standard
Brightness
Diffuser
SSB
SBL
Maximum
Section
Length
Voltage
32
Luminaire
Row
Length
120
277
347
GEB10 <10% THD Electronic
ADEZ3 Advance Mark 10 dim
DMHL3D3 Lutron Hi-Lume dim
ADZT3Advance Mark 7 0-10V dim
32W T8
1
2
3
__________
# of
Emergency
Modules
(Blank)None
1SE
1 section
2SE 2 sections
XSE X sections
Notes:
Semi specular
White steel
blade
X FT
PPLWhite
(4’ increments)
perforated
steel baffle
WPB White Baffle
(pre-finished
or painted)
________________
_________
________________
______________ ______________
Emergency
Type4
Switching
Lamp Color
Mounting Type
SCTSingle
circuit
DCTDual
circuit
L/LP No lamp
L/LPENo lamp. Wired
for energy saving
lamps.
LP830 3000K 80+ CRI
LP835 3500K 80+ CRI
LP841 4100K 80+ CRI
F1/
(Blank)None
ECEmergency
circuit
EL3 Emergency
battery pack
EN3Emergency
battery pack
w/night light
circuit
1 Refer to photometric test for exact distribution
2 Available with 3-lamp cross section only
3 Not available in 347V
/
T-bar ceiling (universal
mounting bracket)
F1A/ T-bar ceiling (UMB with
integrated J-box)
F2/ Hard ceiling (horizontal
J-box)
F3/
Rigid stem
Reference Lamp Chart on
website or consult factory
for other options.
Overall
Suspension
1212”
1515”
1818”
2121”
2424”
XXXX”
Overall
suspension is
measured from
ceiling to bottom
of luminaire.
4 EL and EC are installed in last 4’ of luminaire
sections. Separate feed required unless ELS
or ELS2 is specified
R4
R8
R12
4’ section(s)
8’ section(s)
12’ section(s)
Reference Ballast Wizard on website
or consult factory for other options.
______________
_________________________________
Finish
Options
C110Painted
aluminum (low
gloss)
C210 White white
(fine-textured
low gloss)
C099 Custom finish
ACG
BLK
Adjustable cable grippers
Black cord, cord manager and canopy (not
available with F3)
CP
Chicago plenum (available with F1A only)
DL
Damp location label
DU
Dust cover
ELH
Emergency through wiring w/separate feed
ELS
Emergency through wiring w/single feed,
shared neutral
ELS2
Emergency through wiring w/single feed,
separate neutrals
GLR
Fusing (fast blow)
GMF
Fusing (slow blow)
MCS
Matching feed canopy at support
NEPP5D nLight enabled control module per row/zone
NYC
New York City code
OJB
Offset junction box
SCEP Sculptured end cap
SLP
Sloped ceiling (for 10-45°, must be specified
with F2, ACG and OJB options)
XXXX Integrated sensor; choose options and obtain
code on page 2
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: techsupport@peerlesslighting.com • PeerlessLighting.com
© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Cerra” are registered trademarks of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx
10CRM4 Cerra 10 I/D
Indirect-Direct T8
1
Submitting Agency:
Description:
10CRM4 2 32 WHR 20/80 SBL 8FT R8 120
GEB10 SCT F2/48 LP841 C210 ACG
Project:
Notes:
Cascade Periodontics
8' LENGTH; LAMPS INCLUDED
Cerra 10 I/D
Type:
L8
Type: ________________________
Project: ______________________
Indirect-Direct T8
Suspended
10CRM4
INTEGRATED NLIGHT MICRO SENSOR
Determine the appropriate sensor type, network type and sensor power source for your application. Enter the code in the Options section of the Catalog Number.
EXAMPLE: PDT1
Network Type & Sensor Power Source (choose one)
Sensor Type (choose one)
ADC
nLight model
nES ADCX
Daylight Dimming
Specify 0-10V dimming ballast
No occupancy sensing
PDT
nLight model
nES PDT7 ADCX
Daylight Dimming and/or Occupancy Detection
Specify 0-10v dimming ballast for daylight dimming
Specify fixed-output ballast for occupancy detection only
(daylight dimming disabled)
1*
nLight-Enabled (Network-Ready) with Luminaire-Integrated Power Pack
10’ Cat-5e cable and splitter provided
2
Standalone Operation (No Networking) with Luminaire Integrated Power Pack
No Cat-5e cable provided
3*
nLight-Enabled (Network-Ready) with Remote nLight Power Pack or nPanel
10’ Cat-5e cable and splitter provided
Order required remote nLight Power Pack or nPanel
separately through nLight (Acuity Brands Controls)
For more information about the Integrated nLight Micro Sensor, its capabilities and options, download the PDF guide at: PeerlessLighting.com/nLight-Sensor-Guide
*nLight-Enabled (network-ready) options include one RJ-45 connector on the luminaire and 10’ of Cat-5e cable and a splitter to control the entire luminaire row (depending on
wattage/voltage limitations). The Cat-5e cable drop is located in the same section as the sensor. For multiple zones, please contact techsupport@peerlesslighting.com.
WEIGHTS & SUPPORT SPACING
Suspension spacing equals section length. Default location shown. Consult factory for stem mounting suspension spacing and alternate locations.
STANDARD SECTIONS
Key:
• Support or feed location
4’-0 3⁄8”
28 LBS
⁄16” standard flat end plates
4” optional sculptured end plates
1
4’-0 1⁄2” O.A.
8’-0 1⁄8”
48 LBS
8’-0 1⁄4” O.A.
12’-0”
68 LBS
12’-0 1⁄8” O.A.
PLAN VIEW
CONFIGURATIONS
Cast corner and tenon connectors available for suspended configurations.
Reference Pattern Connector Guide for additional details.
PHOTOMETRICS
Actual performance may differ as a result of end-user environment and application.
1-LAMP T8
91.9% efficiency
2619 delivered lumens
2-LAMP T8
91.2% efficiency
5199 delivered lumens
3-LAMP T8
90.7% efficiency
7759 delivered lumens
66.6% up / 33.4% down
62.9% up / 37.1% down
61.9% up / 38.1% down
2-LAMP T8
40/60 DISTRIBUTION
65.4% efficiency
3730 delivered lumens
2-LAMP T8
20/80 DISTRIBUTION
58.5% efficiency
3332 delivered lumens
2-LAMP T8
0/100 DISTRIBUTION
54.9% efficiency
3132 delivered lumens
36.2% up / 63.8% down
18.8% up / 81.2% down
0.9% up / 99.1% down
2246 5th Street, Berkeley, CA 94710 • Tel: 510.845.2760 • Fax: 510.845.2776 • Email: techsupport@peerlesslighting.com • PeerlessLighting.com
© 2012 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” and “Cerra” are registered trademarks of Acuity Brands Lighting.
Products in this document may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/customerresources/terms_and_conditions.aspx
10CRM4 Cerra 10 I/D
Indirect-Direct T8
2
Submitting Agency:
Description:
MG 24IN 3T5HO GEB10PS 120 CCV
Project:
Notes:
Cascade Periodontics
(3) F24T5HO LAMPS--BY OTHERS
The Magellan Series
Type:
P2
Type:
A softly translucent, concave dome complemented by a
TM
flangeless lens trim and a minimal 3/8-inch ceiling-trim
Project:
flange, Magellan appears to be a floating circle of light.
With six standard sizes and a variety of custom trim colors, it entices the imagination and inspires creativity.
Catalog Number:
Magellan is suitable for lay-in or sheetrock ceilings;
DO NOT TYPE HERE. Autopopulated field.
fixtures must be installed before the sheetrock ceiling. Standard sizes are 12, 24, 36, 48, 60 or 72 inches in
diameter. Consult factory for other sizes and for surface
and pendant applications.
Specification Features
Technical Drawings
Housing
Housing and internal components fabricated from 20-gauge, cold-rolled steel.
Ballast
Thermally protected Class P energysaving electronic ballast.
Trim
Spun steel with 3/8” flange suitable for
lay-in or sheetrock installation. (Note:
Fixture must be installed before ceiling
for sheetrock installation.)
Mounting
Recessed, lay-in or sheetrock.
Finish
Painted high reflectance white powder
coat.
Warranty
Limited warranty, consult factory.
Shielding
Nominal .125”-thick white acrylic dome
in nominal 12”, 24”, 36”, 48”, 60” or
72” diameters. Concave lens shape is
standard, convex lens available for 12”
through 48” nominal sizes.
Certification
cULus Listed, IBEW (Local 3) Unionmade, assembled in the USA.
65⁄8"
103⁄8", 223⁄8", 363⁄8", 463⁄8"
113⁄8", 233⁄8", 373⁄8", 47"
"Y"
MOUNTING HOLE LOCATIONS
"X"
X
6"
12"
18¾"
28"
MG1
MG2
MG3
MG4
Y
131⁄16"
161⁄16"
28"
40"
GALVANIZED MTG CHANNELS WITH 5⁄16" MTG HOLES FOR
THRD'D ROD OR OTHER HARDWARE (BY OTHERS).
Notes
a. Specifications are subject to change
without notice.
b. Actual performance may differ as a
result of end-user environment and application.
c. For photometric information refer to
www.marklighting.com.
Lamps
See lamp chart.
Ordering
Example: MG 24IN 3T5 GEB10PS 120 CCV SM2
Series
Size
MG
12IN
Magellan
7¾"
Number of lamps/Lamp type1
Ballast
Voltage
Shielding
Options
12” diameter
Number of lamps
Lamp type1
GEB10IS3
Standard instant start
120
CCV
EMPK
Emergency battery pack
24IN
24” diameter
1
T5
GEB10PS
Programmed rapid start
277
CVX4 Convex white acrylic
CP
Chicago plenum
36IN
36” diameter
2
T5HO
GEB10DIM
Dimming, 0 - 10v
3472
SM2
Sheet metal ceiling panel 2’x2’
48IN
48” diameter
3
T8
DMHL3D
Lutron Hi-Lume® 3D
SM4
Sheet metal ceiling panel 4’x4’
60IN
60” diameter
4
18BX
ECOS
Lutron Eco System®
72IN
72” diameter
6
40BX
ECOSH
Lutron Eco System® H-Series
8
50BX
ADZT
Advance Mark 7
10
26CFL
Concave white acrylic
32CFL
42CFL
CONFIGURATIONS
Notes
1 Specify number of lamps and lamp type. See configurations table. Consult
factory for other lamps.
2 Consult factory for lamp and ballast compatibility.
3 Available with T8 lamping ONLY.
4 12”, 24”, 36” and 48” nominal sizes only.
marklighting.com
3 Kilmer Rd, Edison NJ 08817
T (732) 985 2600
F (732) 985 8441
SIZE
NUMBER OF LAMPS
LAMP TYPE
12” diameter
24” diameter
36” diameter
48” diameter
60” diameter
72” diameter
1, 2
3, 4
4, 6
6, 8
6, 8
6, 8, 10
18BX, 26CFL, 32CFL, 42CFL
T5, T5HO, T8, 40BX, 50BX
T5, T5HO, T8
T5, T5HO, T8
T5, T5HO, T8
T5, T5HO, T8
©Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
Submitting Agency:
Description:
MG 24IN 3T5HO GEB10PS 120 CCV
Project:
Notes:
Cascade Periodontics
(3) F24T5HO LAMPS--BY OTHERS
Type:
P2
The Magellan Series
TM
Photometric Information
Catalog Number
MG 4 6T8
Report Number
12569.0
90°
80°
800
Lamps
(6) T8, rated 2950 lumens per lamp
1600
Total Efficiency
66.1%
2400
70°
60°
50°
3200
40°
0°
marklighting.com
3 Kilmer Rd, Edison NJ 08817
10°
T (732) 985 2600
F (732) 985 8441
20°
30°
Floor
20%
Ceiling
80%
50%
30%
Walls
70%
50%
30%
10%
50%
30%
10%
50%
30%
10%
0
79
79
79
79
73
73
73
70
70
70
1
72
68
66
63
64
62
60
62
60
58
2
65
60
55
51
56
52
49
54
51
48
3
59
52
47
42
49
45
41
47
44
41
4
54
46
40
36
44
39
35
42
38
35
5
50
41
35
31
39
34
30
38
33
30
6
46
37
31
27
35
30
27
34
30
26
7
43
34
28
24
32
27
24
31
27
23
8
40
31
25
21
29
25
21
29
24
21
9
37
28
23
19
27
22
19
26
22
19
10
35
26
21
17
25
20
17
24
20
17
©Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
Submitting Agency:
Description:
MG 24IN 3T5HO GEB10PS 120 CCV EMPK
Project:
Notes:
Cascade Periodontics
EM BATTERY; (3) F24T5HO LAMPS--BY OTHERS
The Magellan Series
Type:
P2E
Type:
A softly translucent, concave dome complemented by a
TM
flangeless lens trim and a minimal 3/8-inch ceiling-trim
Project:
flange, Magellan appears to be a floating circle of light.
With six standard sizes and a variety of custom trim colors, it entices the imagination and inspires creativity.
Catalog Number:
Magellan is suitable for lay-in or sheetrock ceilings;
DO NOT TYPE HERE. Autopopulated field.
fixtures must be installed before the sheetrock ceiling. Standard sizes are 12, 24, 36, 48, 60 or 72 inches in
diameter. Consult factory for other sizes and for surface
and pendant applications.
Specification Features
Technical Drawings
Housing
Housing and internal components fabricated from 20-gauge, cold-rolled steel.
Ballast
Thermally protected Class P energysaving electronic ballast.
Trim
Spun steel with 3/8” flange suitable for
lay-in or sheetrock installation. (Note:
Fixture must be installed before ceiling
for sheetrock installation.)
Mounting
Recessed, lay-in or sheetrock.
Finish
Painted high reflectance white powder
coat.
Warranty
Limited warranty, consult factory.
Shielding
Nominal .125”-thick white acrylic dome
in nominal 12”, 24”, 36”, 48”, 60” or
72” diameters. Concave lens shape is
standard, convex lens available for 12”
through 48” nominal sizes.
Certification
cULus Listed, IBEW (Local 3) Unionmade, assembled in the USA.
65⁄8"
7¾"
103⁄8", 223⁄8", 363⁄8", 463⁄8"
113⁄8", 233⁄8", 373⁄8", 47"
"Y"
MOUNTING HOLE LOCATIONS
"X"
X
6"
12"
18¾"
28"
MG1
MG2
MG3
MG4
Y
131⁄16"
161⁄16"
28"
40"
GALVANIZED MTG CHANNELS WITH 5⁄16" MTG HOLES FOR
THRD'D ROD OR OTHER HARDWARE (BY OTHERS).
Notes
a. Specifications are subject to change
without notice.
b. Actual performance may differ as a
result of end-user environment and application.
c. For photometric information refer to
www.marklighting.com.
Lamps
See lamp chart.
Ordering
Example: MG 24IN 3T5 GEB10PS 120 CCV SM2
Series
Size
Number of lamps/Lamp type1
Ballast
Voltage
Shielding
Options
MG
12IN
12” diameter
Number of lamps
Lamp type1
GEB10IS3
Standard instant start
120
CCV
EMPK
Emergency battery pack
24IN
24” diameter
1
T5
GEB10PS
Programmed rapid start
277
CVX4 Convex white acrylic
CP
Chicago plenum
36IN
36” diameter
2
T5HO
GEB10DIM
Dimming, 0 - 10v
3472
SM2
Sheet metal ceiling panel 2’x2’
48IN
48” diameter
3
T8
DMHL3D
Lutron Hi-Lume® 3D
SM4
Sheet metal ceiling panel 4’x4’
60IN
60” diameter
4
18BX
ECOS
Lutron Eco System®
72IN
72” diameter
6
40BX
ECOSH
Lutron Eco System® H-Series
8
50BX
ADZT
Advance Mark 7
10
26CFL
Magellan
Concave white acrylic
32CFL
42CFL
CONFIGURATIONS
Notes
1 Specify number of lamps and lamp type. See configurations table. Consult
factory for other lamps.
2 Consult factory for lamp and ballast compatibility.
3 Available with T8 lamping ONLY.
4 12”, 24”, 36” and 48” nominal sizes only.
marklighting.com
3 Kilmer Rd, Edison NJ 08817
T (732) 985 2600
F (732) 985 8441
SIZE
NUMBER OF LAMPS
LAMP TYPE
12” diameter
24” diameter
36” diameter
48” diameter
60” diameter
72” diameter
1, 2
3, 4
4, 6
6, 8
6, 8
6, 8, 10
18BX, 26CFL, 32CFL, 42CFL
T5, T5HO, T8, 40BX, 50BX
T5, T5HO, T8
T5, T5HO, T8
T5, T5HO, T8
T5, T5HO, T8
©Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
Submitting Agency:
Description:
MG 24IN 3T5HO GEB10PS 120 CCV EMPK
Project:
Notes:
Cascade Periodontics
EM BATTERY; (3) F24T5HO LAMPS--BY OTHERS
Type:
P2E
The Magellan Series
TM
Photometric Information
Catalog Number
MG 4 6T8
Report Number
12569.0
90°
80°
800
Lamps
(6) T8, rated 2950 lumens per lamp
1600
Total Efficiency
66.1%
2400
70°
60°
50°
3200
40°
0°
marklighting.com
3 Kilmer Rd, Edison NJ 08817
10°
T (732) 985 2600
F (732) 985 8441
20°
30°
Floor
20%
Ceiling
80%
50%
30%
Walls
70%
50%
30%
10%
50%
30%
10%
50%
30%
10%
0
79
79
79
79
73
73
73
70
70
70
1
72
68
66
63
64
62
60
62
60
58
2
65
60
55
51
56
52
49
54
51
48
3
59
52
47
42
49
45
41
47
44
41
4
54
46
40
36
44
39
35
42
38
35
5
50
41
35
31
39
34
30
38
33
30
6
46
37
31
27
35
30
27
34
30
26
7
43
34
28
24
32
27
24
31
27
23
8
40
31
25
21
29
25
21
29
24
21
9
37
28
23
19
27
22
19
26
22
19
10
35
26
21
17
25
20
17
24
20
17
©Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
Submitting Agency:
Description:
MG 36IN 6T5HO GEB10PS 120 CCV EMPK
Project:
Notes:
Cascade Periodontics
EM BATTERY; (6) F39T5HO LAMPS--BY OTHERS
The Magellan Series
Type:
P1E
Type:
A softly translucent, concave dome complemented by a
TM
flangeless lens trim and a minimal 3/8-inch ceiling-trim
Project:
flange, Magellan appears to be a floating circle of light.
With six standard sizes and a variety of custom trim colors, it entices the imagination and inspires creativity.
Catalog Number:
Magellan is suitable for lay-in or sheetrock ceilings;
DO NOT TYPE HERE. Autopopulated field.
fixtures must be installed before the sheetrock ceiling. Standard sizes are 12, 24, 36, 48, 60 or 72 inches in
diameter. Consult factory for other sizes and for surface
and pendant applications.
Specification Features
Technical Drawings
Housing
Housing and internal components fabricated from 20-gauge, cold-rolled steel.
Ballast
Thermally protected Class P energysaving electronic ballast.
Trim
Spun steel with 3/8” flange suitable for
lay-in or sheetrock installation. (Note:
Fixture must be installed before ceiling
for sheetrock installation.)
Mounting
Recessed, lay-in or sheetrock.
Finish
Painted high reflectance white powder
coat.
Warranty
Limited warranty, consult factory.
Shielding
Nominal .125”-thick white acrylic dome
in nominal 12”, 24”, 36”, 48”, 60” or
72” diameters. Concave lens shape is
standard, convex lens available for 12”
through 48” nominal sizes.
Certification
cULus Listed, IBEW (Local 3) Unionmade, assembled in the USA.
65⁄8"
7¾"
103⁄8", 223⁄8", 363⁄8", 463⁄8"
113⁄8", 233⁄8", 373⁄8", 47"
"Y"
MOUNTING HOLE LOCATIONS
"X"
X
6"
12"
18¾"
28"
MG1
MG2
MG3
MG4
Y
131⁄16"
161⁄16"
28"
40"
GALVANIZED MTG CHANNELS WITH 5⁄16" MTG HOLES FOR
THRD'D ROD OR OTHER HARDWARE (BY OTHERS).
Notes
a. Specifications are subject to change
without notice.
b. Actual performance may differ as a
result of end-user environment and application.
c. For photometric information refer to
www.marklighting.com.
Lamps
See lamp chart.
Ordering
Example: MG 24IN 3T5 GEB10PS 120 CCV SM2
Series
Size
Number of lamps/Lamp type1
Ballast
Voltage
Shielding
Options
MG
12IN
12” diameter
Number of lamps
Lamp type1
GEB10IS3
Standard instant start
120
CCV
EMPK
Emergency battery pack
24IN
24” diameter
1
T5
GEB10PS
Programmed rapid start
277
CVX4 Convex white acrylic
CP
Chicago plenum
36IN
36” diameter
2
T5HO
GEB10DIM
Dimming, 0 - 10v
3472
SM2
Sheet metal ceiling panel 2’x2’
48IN
48” diameter
3
T8
DMHL3D
Lutron Hi-Lume® 3D
SM4
Sheet metal ceiling panel 4’x4’
60IN
60” diameter
4
18BX
ECOS
Lutron Eco System®
72IN
72” diameter
6
40BX
ECOSH
Lutron Eco System® H-Series
8
50BX
ADZT
Advance Mark 7
10
26CFL
Magellan
Concave white acrylic
32CFL
42CFL
CONFIGURATIONS
Notes
1 Specify number of lamps and lamp type. See configurations table. Consult
factory for other lamps.
2 Consult factory for lamp and ballast compatibility.
3 Available with T8 lamping ONLY.
4 12”, 24”, 36” and 48” nominal sizes only.
marklighting.com
3 Kilmer Rd, Edison NJ 08817
T (732) 985 2600
F (732) 985 8441
SIZE
NUMBER OF LAMPS
LAMP TYPE
12” diameter
24” diameter
36” diameter
48” diameter
60” diameter
72” diameter
1, 2
3, 4
4, 6
6, 8
6, 8
6, 8, 10
18BX, 26CFL, 32CFL, 42CFL
T5, T5HO, T8, 40BX, 50BX
T5, T5HO, T8
T5, T5HO, T8
T5, T5HO, T8
T5, T5HO, T8
©Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
Submitting Agency:
Description:
MG 36IN 6T5HO GEB10PS 120 CCV EMPK
Project:
Notes:
Cascade Periodontics
EM BATTERY; (6) F39T5HO LAMPS--BY OTHERS
Type:
P1E
The Magellan Series
TM
Photometric Information
Catalog Number
MG 4 6T8
Report Number
12569.0
90°
80°
800
Lamps
(6) T8, rated 2950 lumens per lamp
1600
Total Efficiency
66.1%
2400
70°
60°
50°
3200
40°
0°
marklighting.com
3 Kilmer Rd, Edison NJ 08817
10°
T (732) 985 2600
F (732) 985 8441
20°
30°
Floor
20%
Ceiling
80%
50%
30%
Walls
70%
50%
30%
10%
50%
30%
10%
50%
30%
10%
0
79
79
79
79
73
73
73
70
70
70
1
72
68
66
63
64
62
60
62
60
58
2
65
60
55
51
56
52
49
54
51
48
3
59
52
47
42
49
45
41
47
44
41
4
54
46
40
36
44
39
35
42
38
35
5
50
41
35
31
39
34
30
38
33
30
6
46
37
31
27
35
30
27
34
30
26
7
43
34
28
24
32
27
24
31
27
23
8
40
31
25
21
29
25
21
29
24
21
9
37
28
23
19
27
22
19
26
22
19
10
35
26
21
17
25
20
17
24
20
17
©Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
Submitting Agency:
Description:
Project:
Notes:
Type:
MG 48IN 6T5HO GEB10DIM(0-10V) 120 CCV
EMPK
PE
Cascade Periodontics
EM BATTERY; 0-10V DIMMING BALLAST; (6) F54T5HO
LAMPS--BY OTHERS
The Magellan Series
Type:
A softly translucent, concave dome complemented by a
TM
flangeless lens trim and a minimal 3/8-inch ceiling-trim
Project:
flange, Magellan appears to be a floating circle of light.
With six standard sizes and a variety of custom trim colors, it entices the imagination and inspires creativity.
Catalog Number:
Magellan is suitable for lay-in or sheetrock ceilings;
DO NOT TYPE HERE. Autopopulated field.
fixtures must be installed before the sheetrock ceiling. Standard sizes are 12, 24, 36, 48, 60 or 72 inches in
diameter. Consult factory for other sizes and for surface
and pendant applications.
Specification Features
Technical Drawings
Housing
Housing and internal components fabricated from 20-gauge, cold-rolled steel.
Ballast
Thermally protected Class P energysaving electronic ballast.
Trim
Spun steel with 3/8” flange suitable for
lay-in or sheetrock installation. (Note:
Fixture must be installed before ceiling
for sheetrock installation.)
Mounting
Recessed, lay-in or sheetrock.
Finish
Painted high reflectance white powder
coat.
Warranty
Limited warranty, consult factory.
Shielding
Nominal .125”-thick white acrylic dome
in nominal 12”, 24”, 36”, 48”, 60” or
72” diameters. Concave lens shape is
standard, convex lens available for 12”
through 48” nominal sizes.
Certification
cULus Listed, IBEW (Local 3) Unionmade, assembled in the USA.
65⁄8"
7¾"
103⁄8", 223⁄8", 363⁄8", 463⁄8"
113⁄8", 233⁄8", 373⁄8", 47"
"Y"
MOUNTING HOLE LOCATIONS
"X"
X
6"
12"
18¾"
28"
MG1
MG2
MG3
MG4
Y
131⁄16"
161⁄16"
28"
40"
GALVANIZED MTG CHANNELS WITH 5⁄16" MTG HOLES FOR
THRD'D ROD OR OTHER HARDWARE (BY OTHERS).
Notes
a. Specifications are subject to change
without notice.
b. Actual performance may differ as a
result of end-user environment and application.
c. For photometric information refer to
www.marklighting.com.
Lamps
See lamp chart.
Ordering
Example: MG 24IN 3T5 GEB10PS 120 CCV SM2
Series
Size
Number of lamps/Lamp type1
Ballast
Voltage
Shielding
Options
MG
12IN
12” diameter
Number of lamps
Lamp type1
GEB10IS3
Standard instant start
120
CCV
EMPK
Emergency battery pack
24IN
24” diameter
1
T5
GEB10PS
Programmed rapid start
277
CVX4 Convex white acrylic
CP
Chicago plenum
36IN
36” diameter
2
T5HO
GEB10DIM
Dimming, 0 - 10v
3472
SM2
Sheet metal ceiling panel 2’x2’
48IN
48” diameter
3
T8
DMHL3D
Lutron Hi-Lume® 3D
SM4
Sheet metal ceiling panel 4’x4’
60IN
60” diameter
4
18BX
ECOS
Lutron Eco System®
72IN
72” diameter
6
40BX
ECOSH
Lutron Eco System® H-Series
8
50BX
ADZT
Advance Mark 7
10
26CFL
Magellan
Concave white acrylic
32CFL
42CFL
CONFIGURATIONS
Notes
1 Specify number of lamps and lamp type. See configurations table. Consult
factory for other lamps.
2 Consult factory for lamp and ballast compatibility.
3 Available with T8 lamping ONLY.
4 12”, 24”, 36” and 48” nominal sizes only.
marklighting.com
3 Kilmer Rd, Edison NJ 08817
T (732) 985 2600
F (732) 985 8441
SIZE
NUMBER OF LAMPS
LAMP TYPE
12” diameter
24” diameter
36” diameter
48” diameter
60” diameter
72” diameter
1, 2
3, 4
4, 6
6, 8
6, 8
6, 8, 10
18BX, 26CFL, 32CFL, 42CFL
T5, T5HO, T8, 40BX, 50BX
T5, T5HO, T8
T5, T5HO, T8
T5, T5HO, T8
T5, T5HO, T8
©Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
Submitting Agency:
Description:
Project:
Notes:
Type:
MG 48IN 6T5HO GEB10DIM(0-10V) 120 CCV
EMPK
PE
Cascade Periodontics
EM BATTERY; 0-10V DIMMING BALLAST; (6) F54T5HO
LAMPS--BY OTHERS
The Magellan Series
TM
Photometric Information
Catalog Number
MG 4 6T8
Report Number
12569.0
90°
80°
800
Lamps
(6) T8, rated 2950 lumens per lamp
1600
Total Efficiency
66.1%
2400
70°
60°
50°
3200
40°
0°
marklighting.com
3 Kilmer Rd, Edison NJ 08817
10°
T (732) 985 2600
F (732) 985 8441
20°
30°
Floor
20%
Ceiling
80%
50%
30%
Walls
70%
50%
30%
10%
50%
30%
10%
50%
30%
10%
0
79
79
79
79
73
73
73
70
70
70
1
72
68
66
63
64
62
60
62
60
58
2
65
60
55
51
56
52
49
54
51
48
3
59
52
47
42
49
45
41
47
44
41
4
54
46
40
36
44
39
35
42
38
35
5
50
41
35
31
39
34
30
38
33
30
6
46
37
31
27
35
30
27
34
30
26
7
43
34
28
24
32
27
24
31
27
23
8
40
31
25
21
29
25
21
29
24
21
9
37
28
23
19
27
22
19
26
22
19
10
35
26
21
17
25
20
17
24
20
17
©Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design, materials and finish in any way that will not alter installed appearance or reduce function and performance.
Submitting Agency:
Description:
ISD BC 120/277 WH M10
Project:
Notes:
Cascade Periodontics
WALLBOX DIMMER, WHITE
Type:
PE
Catalog Number
Notes
Type
Wallbox Dimmers
FEATURES
INTENDED USE
To provide direct dimming and switching control of LED and fluorescent fixtures
equipped with four-wire ( 0-10 VDC) dimming ballasts.
ISD BC
ATTRIBUTES
Fluid slide movement allows fine adjustment of light level over the entire dimming
range. Separate ON/OFF preset switch permits switching the lighting without disturbing the light level setting. An integral LED indicator turns ON when the dimmer
is OFF to facilitate location in a dark room. ISD Series controls are compatible with
the DSA Series wallplates and other Decora® style devices.
FLUORESCENT and LED FIXTURE SLIDE DIMMER
CONSTRUCTION
Strap-mount device is designed to fit standard single- or multi-gang switch boxes.
FINISH
Standard white or ivory finish devices are supplied with a single-gang Decora style
wallplate. Snap-on color change kits are available allowing field color change of
the device to gray, black, brown, almond, white, or ivory. Color change kits include
a matching single-gang Decora style wallplate.
ELECTRICAL
Uses standard single-pole or three-way wiring. No neutral connection is required.
Separate low voltage connection to luminaire for 0 to 10-volt control signal.
Dual rated for 120 and 277VAC ballast loads.
For additional switching capacity, use in conjunction with PP20 power control
station.
FUNCTIONAL
Integral push ON/push OFF switch allows lighting to be switched ON and OFF at
the level currently set by the slider. Ballast controller can be used with standard
three-way and four-way switches for applications requiring control from multiple
locations.
INSTALLATION
Wall mounts over standard single-gang switch box. Devices can be ganged into
multi-gang assemblies by breaking off the scored aluminum tabs.
LISTING
UL Listed. CSA Certified.
WARRANTY
Two -year total customer satisfaction warranty.
Shown with optional DSA FP D1 WH screwless wallplate
(order separately)
Decora® is a registered trademark of Leviton®.
Example: ISD BC 120/277 WH
ORDERING
INFORMATION
Choose the boldface catalog nomenclature that best suits your needs and
write it on the appropriate line. Order accessories as separate catalog number.
ISD
BC
120/277
Series
Type
Voltage
ISD
BCBallast controller
120/277 Dual voltage
Color1
IV Ivory
WHWhite
Accessories
NOTE:
1 ISD dimmers are supplied with standard wallplates. Order
optional IV ivory or WH white screwless designer wallplates to
match dimmer if desired.
Order as separate item.
I SD CCKIT _ _ Color change kit, specify WH (White), IV (Ivory), GY (Gray), BR (Brown), BK (Black) or AL (Almond).
DSA FP D# _ _ Ivory screwless thermoplastic wallplate for ISD or Decora® compatible devices. Specify number of gangs (# =1 to 6) and color [WH (white), IV (ivory), GY (gray), BR (brown), BK (black) or AL (almond)].
Note: Consult factory for color availability in multi-gang plate configuration.
Controls
Sheet #: ISD-BC
Submitting Agency:
Description:
ISD BC 120/277 WH M10
Project:
Notes:
Cascade Periodontics
WALLBOX DIMMER, WHITE
Type:
PE
ISD BC LED and Ballast Controller
WIRING DIAGRAMS
SPECIFICATIONS
Single-Location Control Application
CAP
OFF
ELECTRICAL
• Input: 120/277 VAC @ 50/60Hz (switch only).
DIMMER
GRAY
• Standard three-way operation (ON/OFF only.
PURPLE
RED
• Maximum low voltage control loading fifty (50) ballasts.
GRAY
RED
HOT (BLACK)
BLACK
BLACK
LINE
120/277VAC, 60Hz
• Maximum switch rating: 1200W 120VAC, 1500W 277VAC.
PURPLE
WHITE
GREEN
GROUND
• Use with PP20 power control station for full 16A switching capacity. Operates three PP20 power packs per
ballast controller.
0-10Vdc
BALLAST
TO
LAMPS
PRIMARY
SIDE
NEUTRAL (WHITE)
• No derating is required for multi-gang mounting.
Two-Location Control Application
CLASS 2
CONDUCTORS
3-WAY
SWITCH
ISD BC
DIMMER
COMMON
TERMINAL
(LOAD)
PURPLE
GRAY
HOT
BLACK
• Compatible with Advance Mark VII®, OSRAM Sylvania
Quicktronic HeliosTM or equivilent electronic dimmable
ballasts.
RED
GRAY
BLACK
PURPLE
RED
BLACK
0-10Vdc
BALLAST
LINE
120/277VAC, 60Hz
WHITE
PRIMARY
SIDE
GROUND
GREEN
GROUND
• Compatible ballast control ranges (Subject to change
without notice; contact ballast manufacturer for current
specs.):
ADAVANCE MARK VII
COMPATIBLE
DIMMING
BALLAST
TO
LAMPS
• Compatible with Lutron Hi-Lume or ECO-10 ballasts with
the LEQ FDBI interface.
NEUTRAL (WHITE)
Three-Location Control Application
COMMON
TERMINAL
(BLACK SCREW)
3-WAY SWITCH
4-WAY SWITCH
1
HOT (BLACK)
ISD BC
DIMMER
2
RED
2
RED
• Consult factory for 347VAC or low voltage only switching
requirements.
CLASS 2
CONDUCTORS
PURPLE
GRAY
MECHANICAL
BLACK
1
PURPLE
LINE
VOLTAGE
BLACK
GREEN
GROUND
GREEN
GROUND
Advance Mark VII, RZT Series 100% to 1% continuous
SYLVANIA, Helios
100% to 1% continuous
GREEN
GROUND
WHITE
ADAVANCE MARK VII
COMPATIBLE
DIMMING
BALLAST
• Captured wrap-around slide mechanism, 20mm total
travel.
GRAY
0-10Vdc
BALLAST
• Air-gap push ON/OFF preset switch.
TO
LAMPS
PRIMARY
SIDE
ENVIRONMENTAL
NEUTRAL (WHITE)
• Operating range, 0 – 55o C, 20 – 90% relative humidity,
non condensing.
1 TRAVELERS BETWEEN SWITCHES “IN”
2 TRAVELERS BETWEEN SWITCHES “OUT”
NOTES:
1 Class 2 conductors as part of the same system can be run with line voltage if supplied with 600V insulation.
2 Consult factory for complete class 2 installation instructions.
PP20 power packs - Two-Location Control
DIMENSIONS
All dimensions are inches (centimeters).
PURPLE
GRAY
TO
ADDITIONAL
BALLASTS
COMMON
TERMINAL
(BLACK SCREW)
GRAY
BLACK
BLACK
WHITE
RED
PP20
POWER
PACK
BLACK
LINE
VOLTAGE
GREEN
GROUND
GRAY
CAP
OFF
PURPLE
BLACK
0-10Vdc
BALLAST
WHITE
ISD BC
DIMMER
WHITE
GREEN
GROUND
2.68 (68.1 mm)
BLUE
RED
3-WAY
SWITCH
3.28 (83.3 mm)
BLUE
HOT (BLACK)
4.15 (105.4 mm)
PURPLE
RED
NEUTRAL (WHITE)
2.12 (53.8 mm)
LINE
VOLTAGE
CIRCUIT #2
PP20 power pack - Single-Location Control
1.41
(35.8 mm)
PURPLE
GRAY
PURPLE
HOT (BLACK)
BLACK
GRAY
RED
LINE
VOLTAGE
CIRCUIT #1
RED
BLUE
BLUE
PP20
POWER
PACK
WHITE
BLACK
BLACK
ISD BC GREEN
DIMMER GROUND
TO
ADDITIONAL
BALLASTS
TO
ADDITIONAL
BALLASTS
THIS CIRCUIT
WHITE
RED
BLUE
GRAY
CAP
OFF
PURPLE
BLACK
WHITE
0-10Vdc
BALLAST
BLUE
BLACK
WHITE
PP20
POWER
PACK
BLACK
GRAY
CAP
OFF
PURPLE
BLACK
WHITE
RED
WHITE
0-10Vdc
BALLAST
NEUTRAL (WHITE)
Synergy Lighting Controls
Sheet #: ISD-BC
©2002 Acuity Brands Lighting, Inc., Rev 07/13
One Lithonia Way, Conyers, GA 30012
Phone: 800-533-2719
www.synergylightingcontrols.com
0.38
(9.7 mm)
Submitting Agency:
Description:
FAL-8815-20-MBLK-BKCD-PL1-120E-GU24-DBAL
Project:
Notes:
Cascade Periodontics
(1) 15W GU24 DIMMING LAMP INCLUDED
Type:
R
MINI 1­LIGHT PENDANT Base Part Number: FAL­8815 DESCRIPTION: Mini 1­Light Pendant UL LISTING: Suitable for Damp Locations LAMPING: Incandescent: (1) 40W BA­9 Torpedo Max l Optional Fluorescent: (1) 13W GU24 Self Ballast CFL Max l
SIZE: 5.5" H x 5.75" Dia. (Shade)" OUTDOOR: No ADA: No PRIMARY SHADE MATERIAL: Faux Alabaster Resin Item Shown: FAL­8815­20­MBLK SHADE OPTIONS: Cylinder w/ Flat Rim (­10), Cylinder w/ Broken Rim (­12), Short Tapered Cylinder (­18), Round Flared (­20), Square Flared (­40), Cone (­50), Hourglass (­60) Metal Finishes: METAL FINISH OPTIONS: Dark Bronze (DBRZ), Brushed Nickel (NCKL), Matte Black (MBLK), Antique Brass (ABRS), Polished Chrome (CROM) Dark Bronze (DBRZ)
Brushed Nickel (NCKL)
Polished Chrome (CROM)
Shade Shape Options: Matte Black (MBLK)
Antique Brass (ABRS)
CORD COLOR OPTIONS: Black or White Cord or Rigid Stem Kit OPTIONS AND NOTES: l Available with a Rigid Stem Option Kit (­RIGID), which includes a 360­degree Ball Swivel at the canopy for sloping ceilings (40­degree max slope) l Each Rigid Stem Tube Pack includes: (1) 6" Length, (2) 12" Lenghts, and (1) 18" Length for adjustable drops (48" total drop) l Additional Rigid Stem Tube sets are available for a maximum 96" drop option l Each shade includes 8 ft.of Black or White cord for adjustable drops l If illuminated for more than 2­3 continuous Submitting Agency:
Description:
FAL-8815-20-MBLK-BKCD-PL1-120E-GU24-DBAL
Project:
Notes:
Cascade Periodontics
(1) 15W GU24 DIMMING LAMP INCLUDED
Cylinder w/ Cylinder w/ Short Round Flared Flat Rim (­10) Broken Rim Tapered (­20)
(­12)
Cylinder (­18)
Square Flared (­40)
Cone (­50)
Justice Design Group, LLC. Los Angeles, California Type:
R
hours per day, we strongly recommend the use of screw­in CFLs or LEDs Hourglass (­
60)
Telephone: (800) 533­4799 (213) 437­0102
Fax: (800) 533­2911 (213) 437­0860
Email: sales@JDG.com
Website: www.JDG.com
Submitting Agency:
Type:
Description:
SWBLED M12
Project:
Notes:
Cascade Periodontics
LED WALL SCONCE BACKPLATE
S
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — Provides maintenance-free, energy-efficient general purpose and/or accent lighting
in residential and commercial indoor applications. Designed for use with a variety of Lithonia Lighting
decorative sconce diffusers (see compatibility chart below) to create a look that perfectly compliments any
décor. Ideal for lighting hallways or accenting seating areas.
Type
Decorative Indoor
SWBLED
CONSTRUCTION — Formed aluminum backplate.
Decorative diffusers sold separately (see compatibility chart below).
OPTICS — The AC-driven LED board contains 3000K high-performance LEDs that maintain 720 lumens
output at 50,000 hours of life.
HIGH-PERFORMANCE LED WALL SCONCE BACKPLATE
ADA 4.4 COMPLIANT
ELECTRICAL — 11.2 Watts. LED driver is 120V and operates at 60Hz.
Actual wattage may differ by +/-10% when operating at 120V +/- 10%.
Fully dimmable down to 10%. Works with most standard incandescent dimmers. See chart on back of sheet
for suggested dimmers.
INSTALLATION — For indoor applications only.
All mounting hardware included.
LISTINGS — UL and C-UL Listed to U.S. and Canadian safety requirements. Quality tested in accordance
with IESNA LM-79.
WARRANTY —5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Note: Specifications subject to change without notice.
Dimensions
Compatible Decorative Diffusers
The SWBLED Series is designed to operate with the following decorative diffusers. See diffuser spec sheet
for diffuser specifications.
DLSD1, DLSD2, DLSD3, DLSD4, DLSD5, DLSD6, DLSD7, DLSD8, DLSD9, DLSD10, DLSD11, DLSD12,
DLSD13, DLSD14, DLSD15, DLSD16, DLSD17
DLSD1
ORDERING INFORMATION
DLSD8
DLSD14
All dimensions are inches (centimeters)
Width: 5-1/2” (14)
Length: 5-7/8” (14.9)
Height*: 1-7/16” (3.6)
* Extension from the wall.
DLSD4
For shortest lead times, configure products using bolded options.
Example: SWBLED
SWBLED
Series
Options
1
SWBLED
LED wall sconce backplate
(Consult factory)
Notes
1
Decorative diffusers must be ordered separately.
DECORATIVE INDOOR & OUTDOOR
SWBLED
Submitting Agency:
Description:
SWBLED M12
Project:
Notes:
Cascade Periodontics
LED WALL SCONCE BACKPLATE
Type:
S
SWBLED — LED Wall Sconce Backplate
PHOTOMETRICS
Full photometric data report available within 2 weeks from request. Consult factory.
Suggested Dimmers
The MDP Series is designed to operate with most standard Triac Based (Forward Phase-Control or Leading
Edge) dimmers and is not compatible with 0-10v dimming systems. The following is a list of dimmers
tested with the MDP Series and does not imply any guarantee or warranty of compatibility with a
particular application. Unlisted dimmers do not imply non-compatibility.
Manufacturer
Leviton
Leviton
Leviton
Leviton
Lutron
Series
Illumitech
Trimatron
SureSlide
True Touch
Skylark
Part Number(s)
IPI06-XXX
6602-1, 6681-X, 6683-X, 6684-X, 700-X, 705-X
6631
6606-1LM
S-600, S2-LH
Note: When the installation exceeds 10 fixtures on a single dimmer or distribution lengths exceed 100 feet,
please confirm that the end product performs properly. This is a caused by a high degree of variability in
the triac dimmers.
SWBLED
DECORATIVE & RESIDENTIAL: One Lithonia Way Conyers, GA 30012 Phone: 800.748.5070 Fax: 770.860.3903 www.lithonia.com
© 2011-2014 Acuity Brands, Inc. All rights reserved. Rev. 08/28/14
Submitting Agency:
Description:
DLSD12 BN F01
Project:
Notes:
Cascade Periodontics
DECORATIVE DIFFUSER
Type:
S
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
Type
INTENDED USE — Provides maintenance-free, energy-efficient accent and/or task lighting in residential and
commercial applications. The wide selection of colors and patterns complement any decor. Ideal for accent
lighting in commercial applications such as hallways, stairways, foyers, offices and meeting rooms. For use
with Lithonia Lighting SWBLED LED Wall Sconce Backplate.
Decorative Indoor
DLSD12
CONSTRUCTION — Cast aluminum bands are available in a brushed nickel or a brushed brass finish (see
swatch chart and notes on back of sheet).
WALL SCONCE DIFFUSER
ADA 4.4 COMPLIANT
A slotted polycarbonate diffuser creates a wave-like design. A variety of paper and fabric laminate finishes
are available (see swatch chart and notes on back of sheet).
Sanded clear acrylic top and bottom caps allow for up and down light.
Exposed mounting fasteners are finished white to blend with white acrylic top and bottom panels.
OPTICS — Product does not contain a light source (see SWBLED spec sheet).
INSTALLATION — For indoor applications only.
Wall mount vertically only.
All mounting hardware included. Attaches to the wall sconce backplate using brackets provided.
LISTINGS — ADA compliant.
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Specifications subject to change without notice.
Dimensions
All dimensions are inches (centimeters)
Width: 7-1/2” (19.1)
Length: 11-3/4” (29.8)
Height*: 4” (10.2)
* Extension from the wall.
ORDERING INFORMATION
Example: DLSD12 BN
For shortest lead times, configure products using bolded options.
DLSD12
Series
Band finish
1
DLSD12
Wall sconce diffuser
BN Brushed nickel
BBR Brushed brass
Diffuser or laminate finish/Material 2
F01
F02
F03
F04
F05
F06
F07
White linen
Chocolate linen
Russell square
Bronze mesh
Louver resin
Vermicelli
Stacked stone
P01
P02
P03
P04
P05
P06
P07
P08
P09
P10
P11
P12
P13
White swirl
Rain tree
White grid
Willow
Tan scroll
Brown nature
Cascade
Alma leaves
Falling ash
Silver rice paper
Red nature
Window pane
Seismic white
Notes
1
2
Backplate with light source is ordered separately (see spec sheet SWBLED).
See reverse side for swatches.
DECORATIVE INDOOR & OUTDOOR
DLSD12
Submitting Agency:
Description:
DLSD12 BN F01
Project:
Notes:
Cascade Periodontics
DECORATIVE DIFFUSER
Type:
S
Wall Sconce Diffuser
DIFFUSER SWATCHES
Diffusers must be ordered separately from backplate with light source (SWBLED). More options may be available (consult factory). Diffusers are
custom fabricated and finished. Colors and patterns may vary. Laminated materials will appear darker due to application of protective clear coating.
The visualization of colors on the screen and on this document is conditional based on the characteristics of your printer, monitor and its graphic card.
These swatches are intended as reference.
F01
White Linen
F02
Chocolate Linen
F03
Russell Square
F04
Bronze Mesh
F05
Louver Resin
F06
Vermicelli
F07
Stacked Stone
P01
White Swirl
P02
Rain Tree
P03
White Grid
P04
Willow
P05
Tan Scroll
P06
Brown Nature
P07
Cascade
P09
Falling Ash
P10
Silver Rice Paper
P11
Red Nature
P12
Window Pane
P13
Seismic White
P08
Alma Leaves
BAND SWATCHES
BN
Brushed Nickel
BBR
Brushed Brass
DLSD12
DECORATIVE & RESIDENTIAL: One Lithonia Way Conyers, GA 30012 Phone: 800.748.5070 Fax: 770.860.3903 www.lithonia.com
© 2011-2012 Acuity Brands, Inc. All rights reserved. Rev. 07/09/14
Submitting Agency:
Description:
Z 1 17 MVOLT GEB10IS
Project:
Notes:
Cascade Periodontics
(1) F17T8 LAMP--BY OTHERS
Type:
S2
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — The industry's next generation in linear direct fluorescent products. This new compact,
low-profile design offers our customers unique product features which improve the overall installation
process and appearance while reducing labor cost, making it the most versatile solution for commercial,
retail, manufacturing, warehouse, and cove and display applications.
CONSTRUCTION — Compact designed channel and cover are formed from code-gauge cold-rolled steel.
Innovative T8 two-lamp back plate offers compact design and additional socket protection. Locking lamp
holder tracks bolsters strength of the overall strip construction while creating improved lamp stability.
Design includes T8 socket, features rotating collar and enclosed contacts. Improved easy “snap n’ lock” end
plates allow for quick attachment.
Designed to accommodate a wide variety of T8 lamp lengths. Channel offers the gripper back feature which
strengthens the overall construction and allows for the use of the new Z spring hanger (see back). Newly
designed, patent-pending channel cover offers a secure fit design, allowing for easy access and quick attachment without pinching wires.
Type
One-Lamp T8
Low-Profile T5/T8 Striplight
Z
Two-Lamp T8
Finish: High-gloss, baked white enamel finish (white standard). Five-stage iron-phosphate pretreatment
ensures superior paint adhesion and rust resistance. Other channel paint finish options: black (MB), smoke
gray (SMG) and galvanized (GALV).
Linear Lamps
1 or 2 Lamps
OPTICS — Reflector options include solid or apertured designs in both symmetric and asymmetric configurations. Consult factory for special-apertured versions.
ELECTRICAL — Thermally protected, resetting, Class P, HPF, non-PCB, UL listed. Suitable for damp locations. AWN, TFN or THHN wire used throughout, rated for required temperatures.
Two-Lamp T5
INSTALLATION — Patented-pending “three-point” row connector locks channel together for straighter
and faster row mounting; included as standard. Ideal for surface-mount or suspended.
LISTINGS — UL Listed, CUL Listed or CSA Certified to Canadian Standards. Listed for 25° C ambient
temperature.
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Specifications subject to change without notice.
Z
Compact
strip
For tandem
double-length
unit, add prefix T.
Example: TZ
(see page
3 for
ordering
nomenclature)
1
2
Not
included
17
25
32
14T5
21T5
24T5HO
28T5
39T5HO
54T5HO
Voltage
17W T8 (24")
25W T8 (36")
32W T8 (48")
14W T5 (22")
21W T5 (34")
24W T5 HO (22")
28W T5 (46")
39W T5 HO (34")
54W T5 HO (46")
Accessories: Order as separate catalog number.
SQ_
ZSPRG
HC36
ZACVH
WGZ48
WGZ8SMR48
WGZ8ASR48
WGZ46
WGZ5SMR46
WGZ5ASR46
Width:
2-1/8 (5.4)
Depth: 1-1/2 (3.8)
Swivel-stem hanger (specify length in 2" increments)
Tong and T-grid hanger (for 15/16" T-grid)
Hanger chain, 36"
Adjustable aircraft cable with hook
48" wireguard, white5
48" wireguard, white, for symmetric reflector5
48" wireguard, white, for asymmetric reflector5
46" wireguard, white5
46" wireguard, white, for symmetric reflector5
46" wireguard, white, for asymmetric reflector5
120
277
347
MVOLT
Others
available
Ballast
GEB10IS T8 electronic
ballast, <10%
THD, instant
start (T8 only)
GEB10RS T8 electronic
ballast, <10%
THD, rapid
start1
GEB10PS Electronic
ballast,
<10% THD,
programmed
start
BILP
High-efficiency
.78 bf (low)
1-1/2
(3.7)
All dimensions are inches (centimeters) unless otherwise noted.
Example: Z 1 32 MVOLT GEB10IS
Options
GLR
Internal fast-blow fuse (add X
for external)2
GMF
Internal slow-blow fuse (add X
for external)2
PLR__ Plug in wiring, specify number
of branch circuits and hot wires
(A-black, B-Red, C-Blue, AB
or AC)
EL55 Emergency battery pack
(nominal 390-700 lumens);
consult factory for additional
battery packs2,3,4
EL65 Emergency battery pack (nominal 725-1325 lumens)2, 3, 4
TILW
CSA
NOM
MSI
MSI360
MSE360LBZ
Tandem in-line wiring
CSA Certified
NOM Certified
Aisle motion sensor2, 3
360° motion sensor2, 3
360° motion sensor; for
mounting within row or
at end of row2, 3, 4
Field Installable Reflectors
For T8 fixtures only
Z8SMR48 Symmetric reflector, 48" white5
Z8ASR48 Asymmetric reflector, 48" white5
Z8SMR36 Symmetric reflector, 36" white5
Z8ASR36 Asymmetric reflector, 36" white5
Z8SMR24 Symmetric reflector, 24" white
Z8ASR24 Asymmetric reflector, 24" white
For T5 fixtures only
Z5SMR46
Symmetric reflector, 46" white5
Z5ASR46
Asymmetric reflector, 46" white5
Z5SMR34
Symmetric reflector, 34" white5
Z5ASR34
Asymmetric reflector, 34" white5
Z5SMR22
Symmetric reflector, 22" white
Z5ASR22
Asymmetric reflector, 22" white
Notes
1 For 347V.
2 Specify voltage (available 120/277V).
INDUSTRIAL
2-1/8
(5.3)
1-1/2
(3.7)
For shortest lead times, configure products using standard options (shown in bold.)
Number
Reflectors of lamps Lamp type
Series
2-1/8
(5.3)
T5 Length: 22-3/8 (56.8), 34-1/8 (86.7), 46 (116.8)
68-3/8(173.6) or 92 (233.6)
Actual performance may differ as a result of end-user environment and application.
ORDERING INFORMATION
Specifications
T8 Length: 24 (61.0) ,36 (91.4), 48 (121.9)
72 (182.9) or 96 (243.8)
3
4
5
Not available with CSA Certified.
Available with 4' and 8' lengths only.
Order two for tandem double length fixtures.
Z-T8-T5
Submitting Agency:
Description:
Z 1 17 MVOLT GEB10IS
Project:
Notes:
Cascade Periodontics
(1) F17T8 LAMP--BY OTHERS
Type:
S2
Z T8 / T5 Striplight
MOUNTING DATA
For unit or row installation, surface or stem mounting.
Unit installation — Minimum of two hangers required.
Row installation — One hanger per channel plus one per row required.
Review local codes when installing any product, as the minimum of 1 hanger per fixture may not satisfy your local building code.
Z SPRING HANGER
(ZSPRG)
T8 DIMENSIONS
96
(243.7)
1-1/8 (2.7)
1-1/8 (2.7)
2-1/8 (5.4)
45-7/8
(116.5)
1-1/8 (2.7)
2-1/8 (5.4)
2-1/8 (5.4)
45-7/8
(116.5)
72
(182.7)
1-1/8 (2.7)
33-7/8
(86.0)
2-1/8 (5.4)
33-7/8
(86.0)
48
(121.9)
2-1/8 (5.4)
21-7/8
(55.5)
1-1/8 (2.7)
15-7/8
(40.3)
24
(60.9)
2-1/8 (5.4)
2-1/8
(5.4)
7/8” (2.2)
Dial K.O.
B
.156 x .50
Slot
1-1/8 (2.7)
15-7/8
(40.3)
2-1/8 (5.4)
2-1/8
(5.3)
2-1/8
(5.3)
1-1/2
(3.7)
1-1/8 (2.7)
1-1/2
(3.7)
2-1/4
(5.6)
2-1/8 (5.4)
2-1/8
(5.5)
1-1/4
(3.3)
9-7/8
9-7/8
(25.1)
(25.1)
18
(45.6)
1-1/8 (2.7)
1-1/8 (2.7)
T5 DIMENSIONS
A
2-1/8 (5.4)
21-7/8
(55.5)
36
(91.3)
1-1/8 (2.7)
2-1/8 (5.4)
K.O. / SLOT CHART
1-1/8 (2.7)
1-1/8 (2.7)
2-1/8
(5.4)
92
(233.6)
1-1/8 (2.7)
1-1/8 (2.7)
2-1/8 (5.3)
43-7/8
(111.4)
2-1/8 (5.3)
43-7/8
(111.4)
68-3/8
(173.6)
1-1/8 (2.7)
1-1/8 (2.7)
2-1/8 (5.3)
32
(81.4)
2-1/8 (5.3)
32
(81.4)
46
(116.8)
1-1/8 (2.7)
1-1/8 (2.7)
2-1/8 (5.3)
20-7/8
(53.0)
20-7/8
(53.0)
K.O. / SLOT CHART
A
7/8” (2.2)
Dial K.O.
B
.156 x .50
Slot
2-1/8 (5.3)
34-1/8
(86.7)
1-1/8 (2.7)
1-1/8 (2.7)
2-1/8
(5.3)
2-1/8 (5.3)
15
(38.0)
15
(38.0)
1-1/2
(3.7)
2-1/8 (5.3)
22-3/8
(56.8)
1-1/8 (2.7)
2-1/8
(5.3)
2
(4.9)
1-1/2
(3.7)
2
(4.9)
7/8
(2.3)
1-1/8 (2.7)
2-1/8 (5.3)
9-1/8
(23.0)
PHOTOMETRICS
See www.lithonia.com.
INDUSTRIAL:
Z-T8-T5
One Lithonia Way Conyers, GA 30012
Phone: 800-315-4963 Fax: 770-929-8789
www.lithonia.com
© 2009-2014 Acuity Brands Lighting, Inc.
All rights reserved. Rev. 08/05/14
Submitting Agency:
Description:
Z 1 17 MVOLT GEB10IS
Project:
Notes:
Cascade Periodontics
(1) F17T8 LAMP--BY OTHERS
Type:
S2
Z T8 / T5 Striplight
REFLECTORS
SMR One Lamp
Z5SMR Two Lamps
Z5ASR One Lamp
ASR One Lamp
2-1/8
(53.4)
2-1/8
(53.4)
2
(5.1)
2-3/4
(7.0)
2-3/4
(7.0)
2-3/4
(7.0)
6-1/8
(15.5)
Z8SMR One Lamp
2-1/8
(53.4
3-5/8
(9.2)
Z8ASR Two Lamps
2-1/8
(53.4)
2-1/8
(53.4)
2
(5.1)
2-3/4
(7.0)
2-1/8
(53.4)
2-1/8
(53.4)
2
(5.1)
2-3/4
(7.0)
2-3/4
(7.0)
6-1/8
(15.5)
6-1/
(15.5
ASR Two Lamps
SMR Two Lamps
2
(5.1)
2-3/4
(7.0)
7/8
(2.4)
3-5/8
(9.2)
6-1/8
(15.5)
3-5/8
(9.2)
7/8
(2.4)
Specifications
All dimensions are inches (centimeters)
ORDERING INFORMATION
Series/Length/Distribution
Series
Z5ASR
Z5SMR
Z8ASR
Z8SMR
Asymmetric reflector, T5
Symmetric reflector, T5
Asymmetric reflector, T8
Symmetric reflector, T8
Example: Z5SMR46A8
For shortest lead times, configure products using bolded options.
Finish
Length
Z5ASR/Z5SMR only
22 Nominal 22" length
34 Nominal 34" length
46 Nominal 46" length
Z8ASR/Z8SMR only
24 Nominal 24" length
36 Nominal 36" length
48 Nominal 48" length
Distribution
(blank) Solid
A2
ASR with 2% uplight
A4
ASR with 4% uplight
A5
SMR with 5% uplight
A8
SMR with 8% uplight
P
Perforated
(blank)
MB
GALV
SKGY
SSR
White
Matte black
Galvanized
Smoke gray
Specular finish aluminum (95% reflectance)
INDUSTRIAL:
Z-T8-T5
One Lithonia Way Conyers, GA 30012
Phone: 800-315-4963 Fax: 770-929-8789
www.lithonia.com
© 2009-2014 Acuity Brands Lighting, Inc.
All rights reserved. Rev. 08/05/14
Submitting Agency:
Type:
Description:
LQC 1 G EL N
Project:
Notes:
Cascade Periodontics
SINGLE FACE; GREEN LETTERS; NICAD BATTERY
X
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal for applications requiring general purpose emergency lighting exit sign.
CONSTRUCTION — Die-cast aluminum construction – compact housing. Brushed aluminum faceplate
with matte black electrostatic polymeric trim. Clear lacquer finish on brushed face inhibits fingerprints and
other surface contaminants. Also available in white housing.
Type
Fully overlapping light seal prevents light leaks. Universal directional chevron knockouts are concealed
and easily removed.
Provisions for conduit entry and pendant mounting.
Letters 6” high with 3/4” stroke, with 100 ft viewing distance rating, based upon UL924 standard.
Die-Cast Aluminum Exit
U.S. Patent No. 5,739,639. Other patents pending.
OPTICS — The typical life of the exit LED lamp is 10 years.
LQC
ELECTRICAL — Dual-voltage input capability 120 or 277 VAC. Emergency models provided with test switch,
status indicator and a battery that automatically recharges when normal power is restored.
Battery option: Emergency models provided with maintenance-free, sealed nickel-cadmium battery which
provides 90 minutes of emergency power.
INSTALLATION — Quick-mount installation - less than 5 minutes. Universal mounting (top or end). Back
mount - only available with single face. Completely concealed, easily removed mounting knockouts and
hole plugs. No exposed hardware. Die-cast aluminum canopy provided. Faceplate accessory kit available
for 1-face to 2-face field conversion, see accessories below.
LED LAMPS
LISTINGS — UL listed. Damp location listing 50°F to 104°F (10°C to 40°C). Meets UL 924, NFPA 101 (current
Life Safety Code), NFPA 70-NEC and OSHA illumination standards. NEMA Premium certified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Note: Specifications subject to change without notice.
Specifications
8-1/4
(20.9)
Length: 11-3/4 (29.8)
Depth: 2 (5.1)
Height: 8-1/4 (20.9)
11-3/4
(29.8)
2
(5.1)
Weight: 4.5 lbs. (2.0 kg)
All dimensions are inches (centimeters) unless otherwise specified.
ORDERING INFORMATION
Example: LQC 1 R EL N
All configurations of this product are considered standard and have short lead times.
LQC
Family
LQC
Housing color
(blank) Matte black, brushed
aluminum face
W
White
Number of faces
Letter color
1 Single face
2 Double Face
R Red
G Green
Options
(blank) AC only 120/277
120/277 VAC input with nickel-cadmium battery back-up
EL N
Accessories: Order as separate item.
ELA WG1
Back-mount wireguard1
ELA WGEXT
ELA WGEXE
ELA B US12
Top-mount wireguard1
End-mount wireguard1
12” pendant-mount kit with black canopy. To order white canopy, replace B with
W in catalog number. To order 24” or 36” lengths, replace 12 with 24 or 362
Brushed/black faceplate kit with red and green sign panel for 1-face to 2-face
field conversion
Brushed/black aluminum backplate for 2-face to 1-face field conversion
ELA LQCFPK
ELA LQCBPK
ELA W LQCBPK
ELA W LQCFPK
EMERGENCY
White backplate for 2-face to 1-face field conversion
White faceplate kit with red and green sign panel for 1-face to 2-face field
conversion
Notes
1
2
See spec sheet ELA-WG.
See spec sheet ELA-StemKits.
LQC
Submitting Agency:
Type:
Description:
LQC 1 G EL N
Project:
Notes:
Cascade Periodontics
SINGLE FACE; GREEN LETTERS; NICAD BATTERY
X
LQC Quantum® Die-cast Aluminum LED
SPECIFICATIONS
MOUNTING
All dimensions are inches (centimeters) unless otherwise specified.
Shipping weight: 4.5 lbs. (2.0 kgs.)
ELECTRICAL
Top Mounting
Primary Circuit
Type
Typical
LED life1
Red LED AC only
10 years
Green LED AC only
10 years
Red LED emergency
10 years
Green LED emergency
10 years
Supply
voltage
120
277
120
277
120
277
120
277
Input
watts
.6
.7
1.0
1.2
.6
.7
1.0
1.2
Max.
amps
.05
.06
.05
.06
.06
.05
.05
.06
End Mounting
5-3/4
(14.6)
4-3/4
(12.1)
8-3/4
(22.2)
8-1/4
(20.9)
2
(5.0)
11-3/4
(29.8)
Back Mounting
BATTERY (with EL N option)
Sealed Nickel-Cadmium
Shelf
life2
Typical
life2
Maintenance
3 years
7 - 9 years
none
3
Optimum
temperature4
50°–104°F
(10°–40°C)
4-1/8
(10.5)
5-7/8
(14.9)
11-3/4
(29.8)
Notes
1
2
Based on continuous operation. The typical life of the LED lamp is 10 years.
At 77°F (25°C).
3
All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and
tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the
required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.
4
Optimum ambient temperature range where unit will provide capacity for 90 minutes. Higher and lower
temperatures affect life and capacity. Consult factory for detailed information.
8-1/4
(20.9)
KEY FEATURES
ELA LQCFPK
Faceplate accessory kit with red and
green sign panels for 1-face to 2-face field
conversion.
Quick-Mount installation less than 5 minutes.
The typical life of the LED lamp is 10 years.
LQC
EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800.334.8694 Fax: 770.981-8141 www.lithonia.com ©2007-2013 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/04/13
Submitting Agency:
Type:
Description:
LQC 2 G EL N
Project:
Notes:
Cascade Periodontics
DOUBLE FACE; GREEN LETTERS; NICAD BATTERY
OR
Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal for applications requiring general purpose emergency lighting exit sign.
CONSTRUCTION — Die-cast aluminum construction – compact housing. Brushed aluminum faceplate
with matte black electrostatic polymeric trim. Clear lacquer finish on brushed face inhibits fingerprints and
other surface contaminants. Also available in white housing.
Type
Fully overlapping light seal prevents light leaks. Universal directional chevron knockouts are concealed
and easily removed.
Provisions for conduit entry and pendant mounting.
Letters 6” high with 3/4” stroke, with 100 ft viewing distance rating, based upon UL924 standard.
Die-Cast Aluminum Exit
U.S. Patent No. 5,739,639. Other patents pending.
OPTICS — The typical life of the exit LED lamp is 10 years.
LQC
ELECTRICAL — Dual-voltage input capability 120 or 277 VAC. Emergency models provided with test switch,
status indicator and a battery that automatically recharges when normal power is restored.
Battery option: Emergency models provided with maintenance-free, sealed nickel-cadmium battery which
provides 90 minutes of emergency power.
INSTALLATION — Quick-mount installation - less than 5 minutes. Universal mounting (top or end). Back
mount - only available with single face. Completely concealed, easily removed mounting knockouts and
hole plugs. No exposed hardware. Die-cast aluminum canopy provided. Faceplate accessory kit available
for 1-face to 2-face field conversion, see accessories below.
LED LAMPS
LISTINGS — UL listed. Damp location listing 50°F to 104°F (10°C to 40°C). Meets UL 924, NFPA 101 (current
Life Safety Code), NFPA 70-NEC and OSHA illumination standards. NEMA Premium certified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Note: Specifications subject to change without notice.
Specifications
8-1/4
(20.9)
Length: 11-3/4 (29.8)
Depth: 2 (5.1)
Height: 8-1/4 (20.9)
11-3/4
(29.8)
2
(5.1)
Weight: 4.5 lbs. (2.0 kg)
All dimensions are inches (centimeters) unless otherwise specified.
ORDERING INFORMATION
Example: LQC 1 R EL N
All configurations of this product are considered standard and have short lead times.
LQC
Family
LQC
Housing color
(blank) Matte black, brushed
aluminum face
W
White
Number of faces
Letter color
1 Single face
2 Double Face
R Red
G Green
Options
(blank) AC only 120/277
120/277 VAC input with nickel-cadmium battery back-up
EL N
Accessories: Order as separate item.
ELA WG1
Back-mount wireguard1
ELA WGEXT
ELA WGEXE
ELA B US12
Top-mount wireguard1
End-mount wireguard1
12” pendant-mount kit with black canopy. To order white canopy, replace B with
W in catalog number. To order 24” or 36” lengths, replace 12 with 24 or 362
Brushed/black faceplate kit with red and green sign panel for 1-face to 2-face
field conversion
Brushed/black aluminum backplate for 2-face to 1-face field conversion
ELA LQCFPK
ELA LQCBPK
ELA W LQCBPK
ELA W LQCFPK
EMERGENCY
White backplate for 2-face to 1-face field conversion
White faceplate kit with red and green sign panel for 1-face to 2-face field
conversion
Notes
1
2
See spec sheet ELA-WG.
See spec sheet ELA-StemKits.
LQC
Submitting Agency:
Type:
Description:
LQC 2 G EL N
Project:
Notes:
Cascade Periodontics
DOUBLE FACE; GREEN LETTERS; NICAD BATTERY
OR
LQC Quantum® Die-cast Aluminum LED
SPECIFICATIONS
MOUNTING
All dimensions are inches (centimeters) unless otherwise specified.
Shipping weight: 4.5 lbs. (2.0 kgs.)
ELECTRICAL
Top Mounting
Primary Circuit
Type
Typical
LED life1
Red LED AC only
10 years
Green LED AC only
10 years
Red LED emergency
10 years
Green LED emergency
10 years
Supply
voltage
120
277
120
277
120
277
120
277
Input
watts
.6
.7
1.0
1.2
.6
.7
1.0
1.2
Max.
amps
.05
.06
.05
.06
.06
.05
.05
.06
End Mounting
5-3/4
(14.6)
4-3/4
(12.1)
8-3/4
(22.2)
8-1/4
(20.9)
2
(5.0)
11-3/4
(29.8)
Back Mounting
BATTERY (with EL N option)
Sealed Nickel-Cadmium
Shelf
life2
Typical
life2
Maintenance
3 years
7 - 9 years
none
3
Optimum
temperature4
50°–104°F
(10°–40°C)
4-1/8
(10.5)
5-7/8
(14.9)
11-3/4
(29.8)
Notes
1
2
Based on continuous operation. The typical life of the LED lamp is 10 years.
At 77°F (25°C).
3
All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and
tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the
required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.
4
Optimum ambient temperature range where unit will provide capacity for 90 minutes. Higher and lower
temperatures affect life and capacity. Consult factory for detailed information.
8-1/4
(20.9)
KEY FEATURES
ELA LQCFPK
Faceplate accessory kit with red and
green sign panels for 1-face to 2-face field
conversion.
Quick-Mount installation less than 5 minutes.
The typical life of the LED lamp is 10 years.
LQC
EMERGENCY: One Lithonia Way Conyers, GA 30012 Phone: 800.334.8694 Fax: 770.981-8141 www.lithonia.com ©2007-2013 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/04/13
D ESCRIPTION
The Halo RL560 is a complete LED Baffle-Trim Module for 5” and
6” aperture recessed downlights; suitable for new construction,
remodel and retrofit installation. The RL560 is cULus Listed for
use with Halo and All-Pro, and is UL Classified for use with other
compatible 5” and 6” housings. The RL560 with integral LED driver
offers 120 volt dimming capability. The RL560 lens provides uniform
illumination and wet location listing. The die-cast construction
makes any housing AIR-TITE for added HVAC savings and code
compliance.
HALO
Catalog #
Project
Type
RL560WH6830
T
CASCADE PERIODONTI
Date
Comments
Prepared by
S PECIFICATION FEATU RES
MECHANICAL
Module - Trim
t .PEVMFDPOTUSVDUJPOJODMVEFT
LED, heat sink, reflector, lens,
baffle and trim ring
t %VSBCMFEJFDBTUBMVNJOVN
construction
t 3FHSFTTFECBGGMF
t )FBUTJOLEFTJHOFEUPDPOEVDU
heat away from the LED
keeping the junction
temperatures below specified
maximums, even when
installed in insulated ceiling
environments
t )BMPNBUUFXIJUFQBJOUGJOJTI
t )BMPTBUJOOJDLFMQMBUFEGJOJTI
Lens
t 3FHSFTTFEMFOT
t *NQBDUSFTJTUBOUQPMZDBSCPOBUF
t $POWFYGPSNGPSMBNQMJLF
appearance
t )JHIMVNFOUSBOTNJTTJPO
t%JGGVTJOHGPSFWFOJMMVNJOBUJPO
MOUNTING
Torsion Spring Brackets
t 1SFJOTUBMMFEQSFDJTJPOGPSNFE
torsion spring brackets secure
torsion springs and adjust
to fit 5” or 6” compatible
housings
5” & 6” Friction Blade Kit
t 1SFDJTJPOGPSNFEGSJDUJPO
blades included
t 1SPWJEFBMUFSOBUJWFUP
torsion springs for retrofit in
5” and 6” housings without
torsion spring mounting tabs.
t 'SJDUJPOCMBEFEFTJHOBMMPXT
the RL560 to be installed
in any position within the
housing aperture (360
degrees).
t 3FQMBDFNFOU,JUNPEFM RL56CLIP
Housing Compatibility
See Housing Compatibility
LED
t $PMPS5FNQFSBUVSF$$5
†
0QUJPOT,,BOE
,
t $PMPS3FOEFSJOH*OEFY$3*
†
Options: 83 and 92
t -VNFONBJOUFOBODF
L70 at 50,000 hours projected
in accordance with
IES TM-21
t-&%JTBDIJQPOCPBSEEFTJHO
consisting of a multiple LED
package with proximity
phosphor coating to create one
virtual white light source for a
productive “cone of light”
ELECTRICAL
Power Connections
t -&%DPOOFDUPSJTBOPOTDSFX
base luminaire disconnect
offering easy installation with
the matching Halo 5” H550
Series and 6” H750 Series
housings.
t -&%$POOFDUPSNFFUT
California Title-24 high-efficacy
luminaire requirement for a
non-screw base socket, and
where required to qualify as a
high-efficacy luminaire.
t 5IFJODMVEFE&NFEJVN
screw-base Edison adapter
provides easy retrofit of
incandescent housings (see
Housing Compatibility).
Ground Connection
t 4FQBSBUFHSPVOEJOHDBCMF
included on the module
for attachment to the housing
during installation.
LED Driver
t %JNNBCMFESJWFSJTB7PMU
high efficiency, electronic
power supply providing DC
power to the LED.
t %SJWFSNFFUT'$$&.*3'*
Consumer Level limits for use
in residential and commercial
installations.
t %SJWFSGFBUVSFTIJHIQPXFS
factor, low THD, and has
integral thermal protection in
the event of over temperature
or internal failure.
Dimming
t 5IF)BMP3--&%NPEVMF
is designed for dimming
capability to 10% in normal
operation with standard 120V
electronic low voltage,
LED-Rated, and many
incandescent dimmers.
The RL560 has dimming
capability to 5% with select
dimmers with low end trim
adjustment. (Consult dimmer
manufacturer for dimmer
compatibility and details.
Note, some dimmers require a
neutral in the wallbox.
Warranty
Cooper Lighting provides a five
year limited warranty on RL56
LED.
RL560WH†
White
Compliance
Labels
t 6-D6--JTUFE-VNJOBJSF
(with listed Halo and All-Pro
housings)
t 6-$MBTTJGJFEXJUIPUIFS
housings - see Housing
Compatibility)
t 6-D6--JTUFEGPS%BNQ Location
t 6-D6--JTUFEGPS8FU-PDBUJPO
– Shower Applications
t *1*OHSFTT1SPUFDUJPOSBUFE
t .BZCFJOTUBMMFEJOIPVTJOHT
in direct contact with air
permeable insulation** and
combustible material
RL560SN†
Satin Nickel
80CRI
2700K, 3000K and 3500K
Qualification
t &/&3(:45"3® qualified
residential and commercial*
t $BOCFVTFEGPS4UBUFPG
California Title 24 high efficacy
luminaire compliance*
t $BOCFVTFEGPS*OUFSOBUJPOBM
Energy Conservation Code
(IECC) high efficacy luminaire
compliance
90CRI (white only)
3000K and 3500K
5-Inch / 6-Inch LED
Recessed Retrofit
Module-Trim
IC and AIR-TITE™
Certified under ASTM-E283
BOEMJTUFE6-D6-XJUI
compatible housings, may
be used to meet insulated
ceiling** and restricted air-flow
requirements such as:
t 8BTIJOHUPO4UBUF&OFSHZ
Code
t *OUFSOBUJPOBM&OFSHZ
Conservation Code (IECC)
t /FX:PSL4UBUF&OFSHZ
Conservation Construction
$PEF/:&$$$
t 4UBUFPG$BMJGPSOJB5JUMF
“Recessed Luminaires in
Insulated Ceilings.”
FOR USE IN
INSULATED CEILING
AND NON- INSULATED
CEILING RATED
HOUSINGS
HIGH EFFICACY LED
WITH INTEGRAL
DRIVER - DIMMABLE
2700K
nominal
2725
2700K
3000K
3500K
4100K 5000K
3000K
6500K
nominal
3045
2700K
3000K
3500K
4100K 5000K
3500K
6500K
nominal
3465
*Qualified and compliant. Refer to ENERGY STAR
®
2700K
3000K
3500K
4100K 5000K
6500K
Qualified Products List and CEC (T24) Appliance
Database for listings.
www.cooperlighting.com
** Not for use with housings in direct contact with spray foam insulation.
†
See ordering information table for available models.
ADV131344
August 29, 2013 9:30 AM
7"
[178mm]
7 1/2"
[191mm]
1/2"
[13mm]
6-1/2"
[165mm]
10 1/2"
[267mm]
H7ICATNB
DESCRIPTION
The H7 recessed housings are the
standard in the industry for both
commercial and residential
applications. The wide variety of
trims available allows a number
of different lighting effects to be
created with one basic housing.
The H7ICATNB is designed for
installations where the housing
will be in direct contact with
insulation. Additionally, the
H7ICATNB housing meets
restricted air flow requirements.
The H7ICATNB is designed to
save installation time. It is
designed without a socket plate
for use with socket supporting
trims only. With these trims there
is no need to spend time
removing the socket from the
socket plate and the socket plate
from the housing.
be removed from plaster frame
to provide access to the junction
box.
Slide-N-Side™ Junction
box
• UL Listed for through branch
circuit wiring (maximum 8
No.12 ga., 90°C conductors).
• Seven 1/2" trade size conduit
knockouts .
• Slide-N-Side™ wire traps allow
non-metallic sheathed cable to
be installed without tools and
without removing knockouts.
Accepts a wide range of nonmetallic sheathed cable.
• Allows wiring connections to be
made outside the junction box
• Simply insert the cable directly
into the trap after connections
are made.
• Accommodates the following
standard non-metallic sheathed
cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
• Automatic levelling flange aligns
the housing and lets you hold
the housing in place with one
hand while driving nails.
• Housing can be positioned at
any point within 24" joist span
• Pass-N-Thru™ feature allows
bar hangers to be shortened
without removing from plaster
frame.
• Integral T-bar clip snaps onto Tbars - no additional clips
required. .
Socket
Porcelain socket with nickel plated
brass screw shell, snaps into trim
for consistent lamp positioning.
Thermal Protector
Self resetting thermal protector
deactivates fixture if overheating
occurs due to improper lamping.
Labels
Housing
• UL/cUL Listed
Aluminum construction for
greater heat dissipation.
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Direct Contact
Socket Plate
with Insulation and combustible
GOT NAIL! Pass-N-Thru™
Rigid socket plate adjusts and
material
Bar Hangers.
locks without tools for various
Meets
following requirements:
lamp sizes.
• Pre-installed nail easily installs
• State of California Title 24 Low
in regular lumber, engineered
Plaster Frame
Efficacy Luminaire IC and AT
lumber and laminated beams.
Housing adjusts in plaster frame
Requirement
•
Score
lines
allow
"tooless"
to accommodate up to 1” ceiling
• Washington State Energy
shortening for 12" joists.
thickness. Plaster frame features
Code
• Bar hangers can be repositioned
include:
• International Energy
90° on plaster frame
• Regressed locking screw for
Conservation Code (IECC)
securing hanger bars
• Safety and guidance system
• New York State Energy
• Cutouts for easily crimping
prevents snagging, ensures
Conservation Construction
hanger bars in position
smooth straight nail penetration
Code
• Halo name embossed on plaster and allows bar hangers to be
• Certified Under ASTM-E283
frame Galvanized steel
easily removed if necessary.
construction. The housing can
6" Aperture
IC Insulated Ceiling
No Socket Bracket
1 2 0 V L i n e Vo l t a g e
RECESSED DOWNLIGHTING Incandescent
DIMENSIONS
6"
HALO®
RECESSED DOWNLIGHTING
• For use with socket
supporting trims • Eliminates time and labor
cost of adjusting lamp
position or removing socket
and socket bracket during
installation
• Thermally Protected IC
AIR-TITE™ Housing
• Housing may be covered
with insulation
• For use with 120V
Incandescent lamps
GA-ATH7-6PK
6-pack H7ICAT Air-Tite™ gaskets
A housing gasket is the final step in completing an air-tight, codecompliant installation. Halo makes this final step simple by
including an AirTite™ gasket in each housing to complete the final
installation of the can opening. Should the gaskets be lost or
discarded during the rough-in phase of installation these
replacement kits are available.
COOPER LIGHTING
131
RL56 Series
LIGHTING FACTS
RL560WH6827
RL560WH6830
RL560WH6835
,4PVSDF
,4PVSDF
,4PVSDF
RL560WH6930
RL560WH6935
,4PVSDF
,4PVSDF
ENERGY DATA
RL560 Series Energy Data:
(Values at non-dimming line voltage)
Minimum Starting Temp: -30°C (-22°F)
EMI/RFI: FCC Title 47 CFR, Part 18, Class B (Consumer)
Sound Rating: Class A standards
Input Voltage: 120V
Power Factor: >0.90
Input Frequency: 60Hz
THD: <20%
Input Power: 10.5W (RL560WH6827, RL560SN6827, RL560WH6930, RL560WH6935)
Input Power: 9.4W (RL560WH6830, RL560SN6830, RL560WH6835)
Input Current: .15A
Maximum IC (Insulated Ceiling) Ambient Continuous Operating Temperature: 25°C (77°F)
Maximum Non-IC Ambient Continuous Operating Temperature 40°C (104°F)
RL560SN6827
RL560SN6830
,4PVSDF
,4PVSDF
DIMENSIONS
3.15”
[80mm]
Ø 7.25”
[184mm]
www.cooperlighting.com
RL56 Series
ORDERING INFORM ATI O N
SAMPLE NUMBER: RL560WH6827
Complete unit includes a RL560 Baffle-Trim LED Module and a 5” and 6” compatible housing, ordered separately.
RL56 Series
Accessory (order separately)
80 CRI
RL560WH6827= 5”/6” Retrofit Baffle - Trim LED Module, 83CRI, 2700K, Matte White
RL560SN6827= 5”/6” Retrofit Baffle - Trim LED Module, 83CRI, 2700K, Satin Nickel
RL560WH6830= 5”/6” Retrofit Baffle - Trim LED Module, 83CRI, 3000K, Matte White
RL560SN6830= 5”/6” Retrofit Baffle - Trim LED Module, 83CRI, 3000K, Satin Nickel
RL560WH6835= 5”/6” Retrofit Baffle - Trim LED Module, 83CRI, 3500K, Matte White
RL56CLIP=Replacement kit of 5” and 6” Friction Clips for retrofitting into an existing housing
without torsion spring receiving brackets. (One set of clips included with the unit.)
OT400P=Oversize Flat White Metal Trim Ring 6” I.D. x 9-1/4” O.D. (ring slips behind RL560 ring, in
stepped configuration)
OT403P=Oversize White Plastic Trim Ring 6” I.D. x 8” O.D. (ring slips behind RL560 ring, in stepped
configuration)
TRM690WH=Oversize Matte White Metal Trim Ring. Designed for RL560 ring to inset into oversize
ring for an even (non-stepped) trim surface
HE26LED=Replacement screw base adapter (one included with unit)
90 CRI
RL560WH6930= 5”/6” Retrofit Baffle - Trim LED Module, 92CRI, 3000K, Matte White
RL560WH6935= 5”/6” Retrofit Baffle - Trim LED Module, 92CRI, 3500K, Matte White
HOUSINGS - Halo and All-Pro UL Listed Compatibility
Compatible Halo LED Housings with LED luminaire connector (high-efficacy compliant)
Recessed Can Size Catalog Number
5"
HALO
6"
Description
H550ICAT
5" LED, Insulated Ceiling, AIR-TITE, New Construction Housing
H550RICAT
5" LED, Insulated Ceiling, AIR-TITE, Remodel Housing
H750ICAT
6" LED, Insulated Ceiling, AIR-TITE, New Construction Housing
H750RICAT
6" LED, Insulated Ceiling, AIR-TITE, Remodel Housing
H750T
6" LED, Non-IC, AIR-TITE, New Construction Housing
H750RINTD010
6" LED, Non-IC, AIR-TITE, Remodel International Housing, 0-10V DC Dimming
H750TCP
6" LED, Non-IC, New Construction/Remodel Chicago Plenum Housing
H2750ICAT
6” LED, Shallow, Insulated Ceiling, AIR-TITE, New Construction Housing
Compatible Halo Incandescent E26 Screwbase Housings
5"
HALO
6"
www.cooperlighting.com
H5ICAT
5” Insulated Ceiling, AIR-TITE New Construction Housing
H5RICAT
5” Insulated Ceiling, AIR-TITE Remodel Housing
H5T
5” Non-IC, New Construction Housing
H5RT
5” Non-IC, Remodel Housing
H5TM
5” Non-IC, New Construction Housing (metric version - Canada)
H25ICAT
5” Shallow, Insulated Ceiling, AIR-TITE New Construction
H7ICAT
6” Insulated Ceiling, AIR-TITE New Construction Housing
H7RICAT
6” Insulated Ceiling, AIR-TITE Remodel Housing
H7ICT
6” Insulated Ceiling, New Construction Housing
H7RICT
6” Insulated Ceiling, Remodel Housing
H7ICATNB
6” Insulated Ceiling, AIR-TITE New Construction Housing, No Socket Bracket
H7ICTNB
6” Insulated Ceiling, New Construction Housing, No Socket Bracket
H7T
6” Non-IC, New Construction Housing
H7RT
6” Non-IC, Remodel Housing
H7TNB
6” Non-IC, New Construction Housing, No Socket Bracket
H7TCP
6” Non-IC, Chicago Plenum, New Construction/Remodel Housing
H7UICT
6” Insulated Ceiling, Universal New Construction Housing
H7UICAT
6” Insulated Ceiling, Universal, AIR-TITE, New Construction Housing
H27ICAT
6” Shallow, Insulated Ceiling, AIR-TITE New Construction Housing
H27RICAT
6” Shallow, Insulated Ceiling, AIR-TITE Remodel Housing
H27ICT
6” Shallow, Insulated Ceiling, New Construction Housing
H27RICT
6” Shallow, Insulated Ceiling, Remodel Housing
H27T
6” Shallow, Non-IC, New Construction Housing
H27RT
6” Shallow, Non-IC, Remodel Housing
Submitting Agency:
Type:
Description:
WSX XX
Project:
Notes:
Cascade Periodontics
WALL SWITCH SENSOR
Catalog Number
Notes
PRODUCT OVERVIEW
The WSX Family of wall switch occupancy sensors provides simple and cost effective
solutions for commercial and residential lighting control applications. All WSX
Family sensors have a stylish low profile appearance, soft-click buttons, and provide
small motion detection up to 20 ft (6.10 m), making them perfect for private
offices, private rest rooms, closets, copy rooms, or any other small enclosed space.
Additionally, all WSX Family sensors have a patent-pending wiring method that
enables them to function either with or without a neutral connection. WSX units
come pre-configured for wiring without a neutral, however if connection to neutral
is required by code, contractors can convert the unit in seconds (see page 3).
Type
WSX
FAMILY
WALL SWITCH SENSOR w/
CONVERTIBLE NEUTRAL / NO NEUTRAL WIRING,
PASSIVE INFRARED (PIR) or DUAL TECH (PDT)
All WSX Family sensors utilize 100% digital Passive Infrared (PIR) detection.
Dual Technology (PDT option) versions add Microphonics detection and are
recommended for offices and rooms with obstructions. Additional versions include
units with dual relays - perfect for bi-level applications, and units with an integrated
nightlight - perfect for restrooms and residential applications.
SENSOR OPERATION — WSX sensors detect changes in the Passive Infrared (PIR)
energy given off by occupants as they move within the field-of-view. In an Auto-On
sensor, once occupancy is detected, an internal relay switches on the connected
lighting load. In a Vacancy (Manual On) sensor, the unit’s push button must first be
pressed to initiate the lights on. In a dual relay sensor, once occupancy is detected
the unit will automatically close Pole 1’s relay while still requiring Pole 2’s pushbutton be pressed in order to close Pole 2’s relay. All modes are user adjustable (see
On Modes section).
After the lights are turned on, an internal timer keeps them on during brief periods
of inactivity. Once the time delay has expired, lights are turned off automatically.
The default time delay is 10 minutes - chosen in order to maximize energy savings
while preventing false-offs. This timer is programmable from 30 seconds to 30
minutes, and is reset every time occupancy is re-detected. Patented LampMaximzer
technology is also present in these sensors, providing an additional minimum on
time (disabled by default) to be utilized if desired.
WSX sensors with Passive Dual Technology (PDT option) first see motion using
Passive Infrared (PIR) and then engage Microphonics to listen for sounds that also
indicate continued occupancy. This patented technology dynamically adapts a
sensor to its environment by filtering out constant background noise and detecting
only noises typical of human activity.
WSX
WSX PDT
WSX NL
WSX PDT NL
WSX 2P
WSX PDT 2P
KEY OPTIONS
NIGHT LIGHT (NL)
Ideal for bathrooms (hotel / hospital) or residential applications
• Ultra low power White LED night light (24/7 operation)
• Capable of powering over Ground (no Neutral required)
• Manual On / Auto Off operation of lights (default)
• Available with Single or Dual Relays
DUAL RELAY (2P)
Ideal for bi-level switched rooms or restroom with light & fan
• Includes two isolated relays, Pole 1 defaulted to Auto On, Pole 2 to Vacancy
• Enables separate time delay per pole - programmed via each pole’s push-button
• UL listed to switch different loads per pole - e.g. 277 VAC lights on Pole 1 and 120
VAC fan on Pole 2
LOW TEMPERATURE / HIGH HUMIDITY (LT)
Required for cold / humid areas
• Device electronics are coated for corrosion resistance
• Operates down to -40º F/C (-4º F / 20º C for PDT)
FEATURES
• 100% digital PIR detection - excellent RF immunity
• Ruggedized assembly, vandal resistant lens standard
• Small motion detection to 20 ft
• Dual Technology (PDT) utilizes PIR / Microphonics
detection (patented)
• 100% passive detection, no potential for
interference with other building systems
• Self-grounding mounting strap
• White LED status indicator
• Device accommodates powering over ground or
neutral connection (patent pending)
• Ultra low current leakage (<0.5 mA) when
connected via ground
• Fully meets NEC 2011 Section 404.2C neutral
requirements - no current leakage to ground when
connected to neutral
• Line power and load wires are interchangeable impossible to wire backwards (patented)
• Compatible w/ LEDs, Electronic & Magnetic Ballasts,
CFLs, & Incandescents
• Photocell standard (disabled by default) - prevents
lights from initially turning on if sufficient daylight
is present, but does not turn lights off. Photocell not
available in Night Light or Vacancy only versions.
• Integrated LampMaximizer minimum on time
(patented) provides increased fluorescent lamp life - disabled by default
• Push-button programmable without removing cover
plate - adjustable time delays & operating modes
• Non-volatile settings memory
• Includes wall plate (screwless sold separate)
Sensor Switch 900 Northrop Road, Wallingford, CT 06492 Phone: 1.800.PASSIVE sensorswitch.com ©2013 Acuity Brands Lighting, Inc. All rights reserved 09/05/13
1 of 4
Submitting Agency:
Type:
Description:
WSX XX
Project:
Notes:
Cascade Periodontics
WALL SWITCH SENSOR
WSX Family
OPERATIONAL SETTINGS __________________________________________________________________________________________________
Predictive Mode (setting 3) determines if a user has left the room
after the lights are switched off. It does this by monitoring the
space for a period after the button is pressed (Predictive Grace
Time), following a delay to allow exiting the room (Predictive Exit
Time). If occupancy is detected the device will disable Auto-On
& hold the lights off until manually switched. If no occupancy is
detected the sensor instantly reverts to auto-on mode.
*
NOTE: ( ) Indicates factory default (unless otherwise marked)
2 = Occupancy Time Delay
Time sensor keeps lights on after last occupancy detection.
1 30 sec 4 7.5 min
7 15.0 min 13 30.0 min
2 2.5 min 5 10.0 min* 8 17.5 min
3 5.0 min 6 12.5 min 9 20.0 min
For additional time settings, contact technical support at
1.800.PASSIVE
If Predictive Mode with Expiration (setting 4) is enabled, once
the sensor has disabled Auto-On it will continue to monitor the
space. When no occupancy is detected for a duration equal to the
occupancy time delay, the sensor will revert to Auto-On mode.
1 Override Off **
2 Switch Disable
3 Predictive Mode
4 Predictive Mode with Expiration*
3 = On Mode
Automatic On turns lights on when occupancy is detected. Manual
On requires a button press to turn the lights on. Reduced Turn-On
directs the sensor to only turn on when a large motion, such as
a person entering a room, is detected. Weaker signals, such
as reflections from glass, are ignored. Once lights are on, the
sensor returns to maximum sensitivity.
1 Automatic On
2 Manual On
* Default for WSX (PDT) units & Pole 1 of WSX (PDT) 2P units
** Default for units with -SA, -VA, or -NL options, Pole 2 of WSX
(PDT) 2P units, and both poles of 2P units with -2SA, -2VA,
or -NL options
3 Reduced Turn-On
Settings 1 & 3 not available on -VA (Vacancy only) sensors.
Notes on Default Settings
• WSX (PDT) Series default: Automatic On
• Default for units with -SA, -VA, or -NL option: Manual On
• WSX (PDT) 2P Series default: Pole 1 Auto On, Pole 2 Manual
• Default for 2P units with -2SA, -2VA, or NL options:
Both poles Manual On
5 = Photocell Set-Point
The ambient light level at which the sensor prevents the lights
from initially turning on. Once on, the lights will remain on until
the occupancy time delay expires and turns them off.
1 Disabled* 5 2 fc
9 32 fc
2 Auto Setpoint 6 4 fc
10 64 fc
3 0.5 fc 7 8 fc 4 1 fc 8 16 fc
Note: Sensor changes to Auto On mode if photocell is enabled.
Photocell not present in -NL versions.
4 = Switch Modes
These modes dictate switch functionality.
Pressing the button in Override Off mode (setting 1) turns off
and keeps lights off until pressed again.
Indicates behavior of device’s LED.
1 Occupancy Indication*
3 Disabled
2 Relay Indication
4 Override On***
*Standard Factory Default
Returns all functions to original settings.
1 Maintain Current*
2 Restore Defaults
10 = Minimum On Time
Required initial time for lamps to be on after each switch on,
regardless of occupancy status. Once met, lights resume
following occupancy time delay.
1 0 min (disabled)* 3 30 min
5 60 min
2 15 min
4 45 min
11 = Manual On Grace Period
Time period after lights automatically turn off that they can be
reactivated by motion. (Manual On (Semi-Auto) mode only)
1 0 sec
2 Unused
3 15 sec*
12 = Dual Technology (MicrophonicsTM)
Relative responsiveness of Microphonics detection.
1 Normal*
3 Medium
5 Phase Off 2Off
4 Low
(15-10-5 min)
13 = Microphone Grace Period
Time period after lights are automatically turned off that they
can be voice reactivated.
1 0 sec
3 20 sec
5 40 sec
7 60 sec
2 10 sec* 4 30 sec
6 50 sec
15 = Predictive Exit Time
Time period after manually switching lights off for occupant to
leave the space.
1 5 sec
3 7 sec
5 9 sec
7 15 sec
9 30 sec
2 6 sec
4 8 sec
6 10 sec* 8 20 sec
16 = Predictive Grace Time
7 = LED Operation
Disabling the Switch (setting 2) prevents the button from turning
the lights on. (continued next column)
9 = Restore Factory Defaults
*** Factory Default for -NL version
Time period after Predictive Exit Time that sensor rescans the
room for remaining occupants.
1 0 sec
3 10 sec
5 30 sec*
7 50 sec
2 5 sec
4 20 sec
6 40 sec
8 60 sec
PROGRAMMING INSTRUCTIONS _______________________________________________________________________________________
Operational settings can be changed via the push-button sequence outlined below (note the example used is for changing occupancy time delay). Programming for 2P units done with each
pole’s corresponding push-button.
1.
1.
2.
Predictive
Exit
Time
Microphone
Grace Period
Dual
Technology
15x
While LED
flashes back new
setting 10x...
e.g., 4 flashes
indicates new
7.5 min time
delay setting
3.
2x
3x
4x
5x
PRESS BUTTON
11x
10x
Minimum
On Time
6.
9x
4.
3.
On Mode
12x
Manual On
Grace
Period
5.
16x
e.g., press 2x for
Occupancy Time
Delay
Occupancy
Time
Delay
13x
(MicrophonicsTM)
5.
Predictive
Grace
Time
7x
Restore
Factory
Defaults
4.
30 min
20 min
Photocell
Set-Pt
17.5 min
2.5 min
1x
2x
8x
7x
e.g., 5 flashes is default
10 min time delay
LED
Operation
13x
9x
While LED
flashes
back current
setting 10x...
Switch
Mode
30 sec
15.0 min
3x
PRESS BUTTON
6x
12.5 min
5x
5.0 min
4x
7.5 min
10 min
e.g., press 4x
to change
to 7.5 min
6.
Predictive
Exit
Time
Microphone
Grace Period
Dual
Technology
Predictive
Grace
Time
15x
16x
2x
On Mode
3x
13x
12x
Manual On
Grace
Period
Switch
Mode
4x
5x
PRESS BUTTON
TM
(Microphonics )
11x
10x
Minimum
On Time
7.
Occupancy
Time
Delay
9x
7x
Restore
Factory
Defaults
Photocell
Set-Pt
7.
LED FLASHES
CONFIRMATION
TWICE
PROGRAMMING
COMPLETE
LED
Operation
e.g., press 2x to
save and exit
Sensor Switch 900 Northrop Road, Wallingford, CT 06492 Phone: 1.800.PASSIVE sensorswitch.com ©2013 Acuity Brands Lighting, Inc. All rights reserved 09/05/13
2 of 4
Submitting Agency:
Type:
Description:
WSX XX
Project:
Notes:
Cascade Periodontics
WALL SWITCH SENSOR
WSX Family
COVERAGE PATTERN
TOP VIEW
• Small motion (e.g., hand movements) detection up to 20 ft (6.10 m), ~625 ft2
• Large motion (e.g., walking) detection greater than 36 ft (10.97 m), ~2025 ft2
• Wall-to-Wall coverage
• Passive Dual Technology (Microphonics) provides
overlapping detection of human activity over the
complete PIR coverage area. Advanced filtering is SIDE VIEW
utilized to prevent non-occupant noises from
1.2 m
4 ft
keeping the lights on.
0m
0 ft
3
6
9
12
9
18
27
36
Small motion
detection to ~20 ft
20
6
10
3
Small
motion
detection
to ~20 ft
012
ft 0 m
9
36
30
6
3
0m
3
6
9
12
20
10
0 ft
10
20
30
36
Small motion ~40 ft coverage
Large motion detection to >36 ft
CONVERSION FROM GROUND ONLY (NO NEUTRAL) TO NEUTRAL WIRING
This product is pre-configured for wiring without a neutral, however if connection to neutral is required by code, contractors can quickly and easily convert the unit in seconds.
REMOVE
METAL LINK
IF CONNEC
TING TO
NEUTRAL
Step 2:
Loosen Screws and
Remove Metal Link
Step 1:
Remove Yellow
Label
Step 3:
Connect Neutral to
Silver Screw and
Ground to Green Screw
WIRING TO GROUND (NO NEUTRAL)
WIRING TO NEUTRAL
SINGLE RELAY
SINGLE RELAY
WIRE COLOR KEY
GND
120/277 VAC WIRING
BLACK* - Line 1 Input
BLACK* - Load 1 Output
BLUE* - Line 2 Input
BLUE* - Load 2 Output
N
H
REMOVE
METAL LINK
IF CONNE
CTING TO
NEUTRAL
BLK
LOAD 1
BLK
GND
H
N
H
N
*BLACK wires
can be reversed
BLK
LOAD 1
BLK
DUAL RELAY
N
N
H
REMOVE
METAL LINK
IF CONNE
CTING TO
NEUTRAL
LOAD 2
BLU
BLU
N
H
GND
*BLUE wires
can be reversed
347 VAC WIRING (-347 Option)
Red wires replace Black wires.
DUAL RELAY
N
}
}
N
H
GND
BLK
BLK
LOAD 1
LOAD 2
BLU
BLU
BLK
BLK
LOAD 1
Notes:
- Unit will draw power from either line connection.
- When switching 277 VAC or 347 VAC on both relays, the line inputs must be of the same phase.
Sensor Switch 900 Northrop Road, Wallingford, CT 06492 Phone: 1.800.PASSIVE sensorswitch.com ©2013 Acuity Brands Lighting, Inc. All rights reserved 09/05/13
3 of 4
Submitting Agency:
Type:
Description:
WSX XX
Project:
Notes:
Cascade Periodontics
WALL SWITCH SENSOR
WSX Family
SPECIFICATIONS
PHYSICAL SPECS
SIZE: 2.74”H x 1.68”W x 1.63”D (6.96 cm x 4.27 cm x 4.14 cm)
(not including ground strap)
WEIGHT: 5 oz
MOUNTING: Single Gang Switch Box
MOUNTING HEIGHT: 30-48 in (76.2-121.9 cm)
SILICONE FREE
ROHS COMPLIANT
ELECTRICAL SPECS
MAXIMUM LOAD / POLE (RELAY)
800 W @ 120 VAC
1200 W @ 277 VAC
1500 W @ 347 VAC
MINIMUM LOAD: None
MOTOR LOAD: 1/4 HP
FREQUENCY: 50/60 Hz (timers are 1.2x for 50 Hz)
ENVIRONMENTAL SPECS
OPERATING TEMP
Standard: 14º to 122º F (-10º to 50º C)
LT Option (PIR): -40º to 122º F (-40º to 50º C)
LT Option (PDT): -4º to 122º F (-20º to 50º C)
RELATIVE HUMIDITY:
Standard: 20 to 75% non-condensing
LT Option: 20 to 90% non-condensing
(electronics coated for corrosion resistance)
ORDERING LOGIC
SINGLE RELAY
Series
WSX Passive Infrared (PIR)
WSX PDT Dual Technology
(PIR / Microphonics)
EXAMPLE: WSX PDT WH
Operating Mode1
Blank Auto-On (default)
or Vacancy
SA Vacancy (default)
or Auto-On
VA Vacancy only
Voltage
Blank 120/277 VAC
3472 347 VAC
Color3
WH White
IV Ivory
GY Gray
AL Lt. Almond
BK Black
RD Red
DUAL RELAY
Series
WSX 2P Passive Infrared (PIR)
WSX PDT 2P Dual Technology
(PIR / Microphonics)
EXAMPLE: WSX 2P WH LT
Operating Mode1
Blank Pole 1 Auto-On
Pole 2 Vacancy
(default)
2SA Both Poles
Vacancy
(defaut)
2VA Both Poles
only Vacancy
Voltage
Blank 120/277 VAC
3472 347 VAC
Color3
WH White
IV Ivory
GY Gray
AL Lt. Almond
BK Black
RD Red
NIGHTLIGHT
WSX NL
WSX PDT NL
WSX 2P NL
WSX PDT 2P NL
Temp/Humidity
Blank Standard
LT Low Temp
Temp/Humidity
Blank Standard
LT Low Temp
EXAMPLE: WSX 2P NL WH
Series4
Passive Infrared (PIR)
Dual Technology (PIR / Microphonics)
Dual Relay, Passive Infrared (PIR)
Dual Relay, Dual Technology (PIR / Microphonics)
Voltage
Blank 120/277 VAC
3472 347 VAC
Notes:
1 Operating Modes reprogrammable via push-button except for VA version
2 Wall plates included in white or ivory only for 347 VAC units
3 Matching wall plate provided for 120/277 VAC units
4 Units factory set to Vacancy (Manual On) Operating Mode
Color3
WH White
IV Ivory
GY Gray
AL Lt. Almond
BK Black
RD Red
Temp/Humidity
Blank Standard
LT Low Temp
Sheet#: TS-WSX-001A
C
US LISTED
TITLE 24
ASSEMBLED in U.S.A.
5 YEAR WARRANTY
WARRANTY
5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Sensor Switch 900 Northrop Road, Wallingford, CT 06492 Phone: 1.800.PASSIVE sensorswitch.com ©2013 Acuity Brands Lighting, Inc. All rights reserved 09/05/13
4 of 4
Submitting Agency:
Type:
Description:
PP20
Project:
Notes:
Cascade Periodontics
POWER PACK
PP20
PP20 2P
SP20
®
POWER PACK
RELAY CONTACT PROTECTION
SPECIFICATIONS
OVERVIEW
Power packs are the heart of the low voltage
sensor system. A PP20 Series power pack
transforms Class I high voltage (120/277
VAC or 347 VAC) to Class 2 15 VDC for
powering remote sensors. The PP20 and the
SP20 Series slave pack are also capable of
switching lighting loads on and off using their
internal relays. Class 2 wire leads connect to
18 AWG or smaller low voltage cable running
to the sensors, making installation easy and
clean. Power packs also have an elongated
chase nipple that allows it to be mounted
either directly through a ½ inch knockout into
a junction box, or inside an adjacent box for
meeting specific local code requirements in
ceiling plenums.
FEATURES
Powers Low Voltage Sensors
(PP20/PP20 2P only)
Self-Contained Relay(s) Switch
Line Voltage Loads
Relay Contact Protection
Plenum Rated
PHYSICAL SPECS
SIZE (not including chase nipple)
PP20 / SP20:
3.00” H x 2.25” W x 1.88” D
(7.62 cm x 5.72 cm x 4.78 cm)
PP20 2P:
4.13”H x 3.00”W x 1.88”D
(10.49 cm x 7.62 cm x 4.78 cm)
WEIGHT: 6 oz
MOUNTING: 1/2” knockout
COLOR: Black
OPTIONS
347 VAC (347)
•A
llows power pack to be powered by
and/or switch 347 VAC
LOW TEMP/HIGH HUMIDITY (LT)
•S
ensor is corrosion resistant to moisture
• Operates down to -40º F/C
The most versatile power pack is the PP20, which utilizes a patented relay contact protection
and can power up to 14 sensors. Dual-circuit control can be handled by two PP20’s, one PP20
2P Series 2-Pole power pack, or a PP20 power pack and a SP20 slave packs.
ELECTRICAL SPECS
OPERATING VOLTAGE:
120, 240, 277, or 347 VAC
RELAY CURRENT REQUIREMENTS:
40 mA
SWITCHING LOAD: 20 Amps / Pole
OUTPUT VOLTAGE/CURRENT:
15 VDC, 150 mA (PP20/PP20 2P only)
CLASS 2: 18 AWG, up to 2000 ft
MOTOR LOAD: 1 HP
ENVIRONMENTAL SPECS
OPERATING TEMP:
14º to 160º F (-10º to 71º C)
RELATIVE HUMIDITY:
20 to 90% non-condensing
SILICONE FREE
ROHS COMPLIANT
MOUNTING IN PLENUMS
Power packs are plenum rated. Most local
codes allow for small plastic controls in return
air plenums. To meet all local codes, the units
can be mounted inside an adjacent (deep)
junction box as shown.
RELAY CONTACT PROTECTION
The PP20, PP20 2P, & SP20 all have relay contact protection which uses an AC semiconductor, placed in parallel with the power relay, to perform the actual switching function. The
switching life of this semi-conductor is virtually infinite because it has no moving parts. The
power relay contacts are then used to carry the current during the on state, thereby preventing
in-rush or inductive kick from damaging the relay contacts. The result is extremely long relay
life (tested to 400,000 cycles). When controlling larger loads of electronic ballasts with high
in-rush characteristics, relay contact protection is advised. Power/slave packs without relay
contact protection are also availabe (MP20 / MSP20).
SYSTEM DESIGN CONSIDERATIONS
A local override switch may be upstream or downstream of a PP20. However, if an SP20 or a
PP20 2P is being used, the switch(es) should be downstream on the load side of the relay. If
power is disconnected to the power pack, all subsequent relays will open, turning off all of the
loads. If wiring the local switches before the power pack and slave pack, use multiple PP20’s,
one for each circuit. This will allow for one circuit to remain powered, keeping the system
operational when the other is turned off. When controlling a dimming circuit, PP20 must be
wired before the dimmer, or SP20 may be wired after the dimmer. The SP20 can be used for
line voltage auxiliary contact only.
INTERFACING WITH ELECTRONIC CONTROL SYSTEMS
The Relay Switching System is designed to switch Alternating Currents Only. The relay will not
switch DC signal inputs to EMS or Lighting Control Systems. Use model MP20, or “R” for signal
relay located in Low Voltage Sensor Heads.
C
US LISTED
TITLE 24
MADE in U.S.A.
5 YEAR WARRANTY
ORDERING INFO
SERIES #
PP20
SP20
[SERIES] [# OF POLES] [VOLTAGE] [TEMP/HUMIDITY]
# OF POLES
Blank = 1
2P = 2*
*not available for SP20
VOLTAGE
Blank = 120/277 VAC
347 = 347 VAC** **not available for with 2P
TEMP/HUMIDITY
Blank = 120/277 VAC
LT = Low Temp
Submitting Agency:
Type:
Description:
PP20
Project:
Notes:
Cascade Periodontics
POWER PACK
Revised 10.30.14 © 2013 Sensor Switch
WIRING (DO NOT WIRE HOT)
POWERING CAPACITY
A power pack’s transformers can supply up to 150 mA of power. Each relay requires 40 mA during the on state. Low voltage
remote sensors typically require 3 mA when detecting occupants, and 0.15 mA when in standby. Therefore, each transformer
can handle up to 3 relays (including the relay(s) inside the power pack). For example, one PP20 can power its relay (40 mA)
and 110 mA of external devices. Because of the ultra low current design of the sensors, up to 14 or more sensors can be
connected to a single power pack! If multiple power packs are used together, an additional 110 mA is available.
1 PP20
1 PP20 2P
1 PP20 w/SP20
1 PP20 2P w/SP20
2 PP20
2 PP20 2P
Sensors
14
7
7
5
28
14
Sensors w/ R option
8
6
6
5
16
12
Note 1: Only three relays may be controlled with one Power Pack. If more than three circuits are required, multiple power packs must be used.
Note 2: The R option adds an isolated low voltage relay to a sensor. Only one sensor with this option is typically needed in a room.
Multiple Sensors Controlling One Circuit
Multiple Sensors Controlling Two Circuits
N
RED
BLK
WHT
PP20 2P
H
N
BLK - 120 V
ORN- 277 V
WHT
BLK / ORN
BLU
BLU
RED
RED
SWITCH
LOAD
H
SWITCH
Multiple Sensors Controlling Three Circuits
Multiple Sensors Controlling Four Circuits
Wiring Multiple Power Packs Together
One Sensor Controlling Two Circuits
LOAD
One Sensor Controlling One Circuit
WARRANTY: Sensor Switch, Inc. warrants these products to be free of defects in manufacture and workmanship for a
period of 60 months. Sensor Switch, Inc., upon prompt notice of such defect, will, at its option, provide a Returned Material
Authorization number and repair or replace returned product.
LIMITATIONS AND EXCLUSIONS: This Warranty is in full lieu of all other representation and expressed and implied
warranties (including the implied warranties of merchantability and fitness for use) and under no circumstances shall
Sensor Switch, Inc. be liable for any incidental or consequential property damages or losses.
T054-004
900 Northrop Road, Wallingford, CT 06492 • 1.800.PASSIVE • FX 203.269.9621 • www.sensorswitch.com
Submitting Agency:
Description:
CM 9
Project:
Notes:
Cascade Periodontics
CEILING SENSOR
Type:
®
CM 9
STANDARD RANGE 360º SENSOR
CEILING MOUNT • LOW VOLTAGE • PASSIVE INFRARED (PIR)
SPECIFICATIONS
FEATURES
100% Digital PIR Detection,
Excellent RF Immunity
360º Coverage Pattern
Push-Button Programmable
User Adjustable Time Delays
No Field Calibration or Sensitivity
Adjustments Required
Convenient Test Mode
100 hr Lamp Burn-in Timer
Green LED Indicator
LAMPMAXIMIZER® TECHNOLOGY
• Protects Lamp Life while
Maximizing Energy Savings
• Minimum On Timer (15 min default)
• Occ. Time Delay (10 min defatult)
• LampMaximizer+ Mode Optimizes Lamp Life & Energy Savings (disabled by default)
• Switch Counter (in 1000’s)
• Total Lamp On Time (in khrs)
PHYSICAL SPECS
SIZE 4.55” Dia. (11.56 cm)
1.55” Deep (3.94 cm)
WEIGHT 6 oz
MOUNTING
Ceiling Tile Surface
3.5” Octagon Box
Single Gang Handy Box
COLOR White
ELECTRICAL SPECS
OPERATING VOLTAGE
12-24 VAC/VDC
CURRENT DRAW
Standard, 4 mA
w/ R option, 16 mA
DIMMING LOAD Sinks < 20mA;
~40 Ballasts @ .5mA each
RECOMMENDED POWER PACK
PP20
ENVIRONMENTAL SPECS
OPERATING TEMP
14º to 160º F (-10º to 71º C)
STORAGE TEMP
-14º to 160º F (-26º to 71º C)
RELATIVE HUMIDITY
20 to 90% non-condensing
SILICONE FREE
ROHS COMPLIANT
ORDERING INFO
Blank = None
R = Low Voltage Relay
SENSOR OPERATION
The sensor detects changes in the infrared
energy given off by occupants as they move
within the field-of-view. When occupancy is
detected, a DC output goes high and can
drive up to 200 mA of connected load. The
sensor is powered with 12-24 VAC/VDC and
typically operates with a PP20 or MP20 power
pack, enabling complete 20 Amp circuits to be
controlled. This innovative sensor requires no
field calibration or sensitivity adjustments.
LAMPMAXIMIZER®
This sensor also contains patent pending
LampMaximizer technology that allows users
to aggressively target energy savings while still
protecting lamp life. A minimum on timer, factory
set at 15 minutes, helps preserve lamp life by
eliminating all lamp cycles shorter than lamp
manufacturer recommendations.
A standard occupancy time delay is also present
that ensures lights turn off (assuming minimum
on timer has elapsed) if no occupancy is
detected. This timer is factory set at 10 minutes
to promote energy savings, but is adjustable
between 30 seconds and 20 minutes. These
adjustments can be done manually, through
the unit’s push-button, or automatically every
two weeks through an advanced mode, called
LampMaximizer+, that determines the optimum
time delay in order to maximize both lamp life
and energy savings. Additionally, this sensor
maintains statistics on total lamp on time and
number of cycles.
OPTIONS
LOW VOLTAGE RELAY (R)
• Enables sensors to interface with
other systems (e.g., BMS, lighting
panels)
• Provides dry contact closure via a
SPDT, 1 Amp, 40 Volt relay
• Only one relay needed per zone
• Changes state when all connected
sensors register unoccupied
• Relay requires sensor power to
function
OCCUPANCY CONTROLLED
DIMMING (D)
• Provides dimming output to control
0-10 VDC dimmable ballasts
• Provides a second occupancy timeout period that enables the lights to go
to a dim setting before turning off
• Adjustable max/min dim setting
• Only one sensor per zone needs to
have dimming output
PHOTOCELL (P)
• Auto set-point calibration
• Two selectable modes of operation
• On/Off mode: Photocell has full
control during periods of occupancy
• Inhibit mode: Photocell can prevent
lights from turning on if adequate
daylight is available, but cannot turn
lights off
PHOTOCELL W/ DIMMING (ADC)
• Photocell within sensor maintains total
room light level by controlling levels of
0-10 VDC dimmable ballasts
• Photocell also has full on/off control
during periods of occupancy
• Provides a second occupancy timeout period that enables the lights to go
to a dim setting before turning off
Note: LampMaximizer+ features not
available with ADC option
LOW TEMP/HIGH HUMIDITY (LT)
• Sensor is corrosion resistant to
moisture
• Operates down to -40º F/C
C
US LISTED
TITLE 24
MADE in U.S.A.
5 YEAR WARRANTY
CM 9 [RELAY] [DIMMING/PHOTOCELL] [TEMP/HUMIDITY]
RELAY
OVERVIEW
The CM 9 Series occupancy sensor offers
amazing performance and sensitivity to small
motions for a standard range Passive Infrared
(PIR) sensor. Ideal for small rooms with drop
ceilings and areas without obstructions, the
CM 9 is a snap to install. Its light weight allows
surface mounting to drop ceilings or a ceiling
grid. The CM 9 sensor can cover entire private
offices or smaller rooms by itself, however it is
also the ideal lead sensor for odd shaped rooms.
For example, a CM 9 in a restroom vestibule
can communicate with a CM PDT 9 Dual
Technology sensor in a main stall area. Another
application is a CM 9 covering an entrance hall
to a classroom and communicating with a WV
PDT 16 sensor covering the main room. In both
cases the lights would be activated on by the
CM 9. For mounting above 15 ft (4.57 m), see
the CM 6 Technical Data Sheet.
DIMMING / PHOTOCELL
CHOOSE ONE ONLY
Blank = None
D = Occupancy Controlled Dimming
P = Photocell
ADC = Photocell w/ Dimming
TEMP/HUMIDITY
Blank = Standard
LT = Low Temp
Submitting Agency:
Type:
Description:
CM 9
Project:
Notes:
Cascade Periodontics
CEILING SENSOR
Revised 06.16.10 © 2010 Sensor Switch
COVERAGE PATTERN
9 STANDARD RANGE 360º LENS
Note: Screw axis is
aligned with a long
detection segment
• Best choice for small motion (e.g. hand movements)
detection
• Viewing angle of 56º in a 360º conical shaped pattern
• Provides 12 ft (3.66 m) radial coverage when mounted to
standard 9 ft (2.74 m) ceiling
• 8 to 15 ft (2.44 to 4.57 m) mounting heights provide 10 to 20
ft (3.05 to 6.10 m) radial coverage
TOP VIEW
SIDE VIEW
0 ft
9
3.7
12
1.8
6
0m
0 ft
1.8
6
3.7
12
0m
2.7
3.7
1.8
0m
1.8
3.7
12
6
0 ft
6
12
WIRING (DO NOT WIRE HOT)
STANDARD WIRING
RED - Power Input (12-24 VAC/VDC)
BLACK- Common
WHITE - Occupancy State (high VDC for occupied)
RED
WHT
BLK
POWER PACK
(PP20)
(-)
VIO w/ WHT STRIPE (+)
[D, P, ADC] Photocell / Dimming Options
PHOTOCELL/DIMMING OPTIONS (D, P, ADC)
BLUE - Direct output to power pack for providing photocell
control and/or secondary dim time out. Output is high VDC
with occupancy & low light. Output also held high during
secondary dim time out. For multi-level control, use two
power packs and connect White wire to primary load and
Blue to daylight load.
VIOLET w/ WHITE STRIPE - Connect to 0-10 VDC control
wire (typically Violet) from 0-10 VDC dimmable ballast
GRAY from Ballast - Connect to sensor Black wire
[R] Relay Option
RELAY OPTION (R)
GRAY / BROWN - Connected during occupied state
VIOLET / BROWN - Connected during unoccupied state
Note: Relay is energized during unoccupied state
INSTALLATION
• Mount sensor directly to a ceiling tile or a metallic grid (two
self-tapping screws provided).
• Sensor’s mounting holes also align with 3.5” octagon or
single gang handy box (screws not provided).
• Sensor will detect motions crossing segments more
effectively than motions parallel to beams.
• For optimal detection, position sensor such that segments
are crossed upon entrance and unable to view outside the
space.
PUSH BUTTON
PROGRAMMING
Refer to instruction card IC7.001 for default settings and directions on programming the sensor via the push-button.
WARRANTY: Sensor Switch, Inc. warrants these products to be free of defects in manufacture and workmanship for
a period of 60 months. Sensor Switch, Inc., upon prompt notice of such defect, will, at its option, provide a Returned
Material Authorization number and repair or replace returned product.
LIMITATIONS AND EXCLUSIONS: This Warranty is in full lieu of all other representation and expressed and
implied warranties (including the implied warranties of merchantability and fitness for use) and under no circumstances
shall Sensor Switch, Inc. be liable for any incidental or consequential property damages or losses.
TS-CM-003A
900 Northrop Road, Wallingford, CT 06492 • 1.800.PASSIVE • FX 203.269.9621 • www.sensorswitch.com