Xi Xiang Hua Qiao Village, Bao an, Shenzhen, China
TEL：86-755-61577692
FAX：86-755-61577693
Accessibility Probes
Chuang Xin offers a wide range of probes to meet the most common standards
including those from IEC, EN, UL, GB, and others. Such standards require the
checking of accessibility to dangerous parts of home electronics and appliances,
toys, tools, and a host of other products that are intended to be protected by
enclosures. These probes simulate human fingers, tools, and other items that
would be hazardous to come in contact with certain parts of products.
These probes are constructed from Delrin and appropriate steel with a hardness
of at least 50 HRC and a roughness that does not exceed 1.6 um. Each probe is
supplied with a certificate of calibration and comes in an individual wooden box
with a clear cover.
Model CX-01: Hazardous Moving Parts Probe
For testing accessibility to hazardous moving parts such as access tofan
blades through a fan finger guard. Complies with UL Standards. Made
entirely of stainless steel, weighs 1 lb.
__________________________________________________________
Model CX-02: Finger Nail Probe
For testing the requirement of snap-in devices and snap together enclosures
that protect the user from accessibility to hazardous parts.
Complies with most Standards including IEC 335 based Standards and UL
1025.
__________________________________________________________
Model CX-03 : Test Finger Probe
This is the ¨International〃 test finger required by most IEC, EN and CSA
Standards, in addition to many UL Standards. Built in strict accordance to
the newest requirements - with integral palm simulator. This is the ONLY
Finger Probe available with a integral jack in the handle for continuity
testing - as mandated by the IEC CB Scheme. Finger made of chrome plated
steel. All parts precision machined.
__________________________________________________________
Model CX-04: UL Finger Probe
This is the ¨UL〃 test finger, researched and designed by UL and required
by most UL Standards. Palm simulator and restricted joint movement
simulates human finger movement. Made of all nylon. Bell-Core accessory
available
__________________________________________________________
Model CX-05: Articulated Probe with Discs
Probe is required by GR-1089-CORE. Probe is plastic with 2 precision
Delrin? disks. The disks are positioned at 35 mm. and 9 mm. from the top of
probe. It is used to verify protection from hazardous parts.
__________________________________________________________
Model CXCX-06:
06: Rigid Finger Probe
A ¨rigid〃 version of the International Test Finger, model
TFP-01, (see next page). Used for force applications on openings
(i.e. vents) as required by IEC, EN, UL and CSA Standards. Handle
made of Delrin, rigid finger made of chrome plated steel.
__________________________________________________________
Model CXCX-07:
07: Short Test Pin Probe
Used to test accessibility through enclosure openings per IEC,
EN, UL and CSA Standards. Body is Delrin, tip is stainless steel.
NOTE: Donˇt ever purchase an all plastic version - the tip is
too narrow to maintain tip rigidity!
__________________________________________________________
Model CX-08: Long Test Pin Probe
This pin is used on appliances for verifying that there is no access to
hazardous live parts of heating elements which could be touched accidentally
by a tool (i.e. screwdriver). Meets IEC & EN requirements. Body is Delrin,
tip is stainless steel.
__________________________________________________________
Model CX-09: Test Thorn Probe
For testing accessibility in appliances with visibly glowing heating elements.
Also for testing parts supporting such elements. Complies with IEC, EN, UL
& CSA requirements. Made entirely of stainless steel.
__________________________________________________________
Model CX-10: 1.0mm Test Wire
Used to verify protection of persons against access with a wire. Meets IEC
and EN Standards including IEC 529 for IP4 and suffix D codes. The handle
and stop face are made of Delrin. The wire is made of stainless steel.
__________________________________________________________
Model CX-11: 2.5mm Test Rod
Used to verify the protection of persons against access to hazardous parts.
Also used to verify the protection against access with a tool. Meets IEC and
EN Standards including IEC 529 for IP3 and suffix C codes. The handle and
stop face are made of Delrin. The rod is made of stainless steel.
__________________________________________________________
Model CX-12: Test Sphere Probe
This probe is intended to verify protection of persons against access to
hazardous parts for an IP1 Code. Also used to verify protection from access
with the back of the hand for an IP suffix A code.
Model CXCX-13:
13: Test Sphere Probe
This sphere is intended to verify the degree of protection of
enclosures for an IP2 Code per IEC 529. Sphere is hardened steel
with chrome finish.
__________________________________________________________
Model CX-14: Rigidity Test Rod Probe
For testing enclosure rigidity in accordance with clause 8.1 of IEC 1010 and
the EN, UL and CSA versions of this Standard. Handle is Delrin, tip is
stainless steel.
__________________________________________________________
Model CX-15: Uninsulated Live Parts Probe
For testing accessibility in accordance with many UL Standards. The handle
is Delrin and the tip is stainless steel.
__________________________________________________________
Model CX-16: Enameled Wire Probe
For testing accessibility in accordance with many UL Standards. In many
Standards, this probe is used for access to enamel coated wire (i.e.
transformers and inductors). The handle is Delrin and the tip is stainless
steel.
__________________________________________________________
Model CX-17: 4.0mm Hazardous Live Parts Probe
Used to verify protection against access to hazardous parts through top
openings. Meets IEC, EN, UL and CSA Standards including IEC 1010,
EN61010-1, UL3101-1, and CSA 1010-1. The handle and stop face are made
of Delrin. The rod is made of stainless steel.
__________________________________________________________
Model CX-18: Coin Probe
Four probes in one! Used to determine accessibility to shock hazards in
many household and audio/video products, including Standards UL 1410 and
UL 6500. Made entirely of nickel-plated steel.
__________________________________________________________
Model CX-19: Test Hook Probe
Used on enclosures prior to accessibility testing. The test hook is ¨hooked〃
into vents and seams in the enclosure & then pulled with a force (usually
20N). The hook has a hole at its long end, for use in conjunction with a PFI
series Force Gauge. Made entirely of stainless steel.
__________________________________________________________
Model CX-20: 3.0mm Preset Controls Probe
Used to verify protection against access to hazardous parts by use of a tool
through holes which give access to pre-set controls. Meets IEC, EN, UL and
CSA Standards including IEC 1010, EN 61010-1, U- 3101-1, UL 3111-1 and
CSA 1010-1. The handle and stop face are made of Delrin. The rod is
stainless steel.
______________________________________________
Model CX-21: Blunt-end Probe
Stainless steel probe required by various UL, CSA, IEC, and EN standards.
__________________________________________________________
Model CX-22: Telecom Test Probe
Required by IEC, EN, and some UL and CSA standards to test accessibility
to TNV circuits (telecom). The handle and stop face are Delrin, the tip is
stainless steel.
__________________________________________________________
Model CC-23: Jointed Child Finger Probe ( 0 - 36 months )
Model CX-24: Jointed Child Finger Probe ( 3 - 14 years )
These size test fingers are to test for protection against access to hazardous
parts with a human finger and / or arm. These are high precision probes
made in exact accordance with IEC 61032, Figures 12 and 13. The child's
finger is also called out in U.S. Federal Regulations, Title 16, Volume 2,
Chapter 11, Part 1500 for consumer products.
__________________________________________________________
Model CX-25: Wedge Probe
Wedge Probe for Testing Document Shredders The NAF2 is one of two new
accessibility probes required by UL 60950 for paper shredders
__________________________________________________________
Model CX-26: Rigidity Test Hemisphere
The Rigidity Test Hemisphere is called out in IEC 61010-1, Clause 8.1. It is
12 mm. in diameter. This probe is stainless steel for use with force gauge.
IEC testing of rigidity of enclosures.
IEC 61010
__________________________________________________________
Model CXCX-27A,
27A, B, & C : Saw Blade Accessibility Probe
These accessibility probes are required by IEC60745-2-5 and
60745-2-11. They are safety requirements for saws.
__________________________________________________________
Model CXCX-28 : Rigid Sphere with Handle - 12.5 mm.
Handle Made To Accept IEC 60529, IP2
__________________________________________________________
Model CX-29 : Jewelry Probe - 4mm diameter
Simulates jewelry to IEC 61010-1, Clause 6.2.2
About Us
Shenzhen chuangxin Equipment Co.,LTD. is a supplier of high Quality testing
equipment which is not generally available on the market. Our business is the designing,
development, and manufacturing of special test equipment with reference to IEC, CEE,
EN, DIN,…standards. Such as IEC60061, IEC60884, IEC61032 …
Our company is professionally engaged in the design, development, manufacture and
distribution of following products: GAUGES AND TEST PROBES, IP probes, Fingers
and pins, Gauges for Appliance Couplers, Gauge for caps and other test equipment.With
strong technical resources, strict management systems and perfect production quality
guarantee systems, our company provides guarantee for our customers with
comprehensive quality and service. We will adhere to the persistent policy: offering
thoughtful services with added value for our customers, bringing us benefits, increasing
the value of your brand products.
Contact US:
Email: szcx17@163.com
MSN: whq5658@163.com
Contact Us
Company Name: Shenzhen chuangxin Equipment Co.,LTD.
Contact Person: hong wu
Street Address: Xi Xiang Hua Qiao Village, Bao an, Shenzhen, China
City: shen zhen
Country/Region: China (Mainland)
Telephone: 86-755-61577692
Mobile Phone: 86-13631576199
Fax: 86-755-61577693
MSN: whq5658@163.com
QQ:764066388
Website: http://www.szcx17.com