POCKET GUIDE
Rheem-Ruud Commercial
water heaters
•
Tanktype Gas & Electric
•
Hot Water Supply Heaters
•
Indirect
•
Storage Tanks
• Technical Service ...................................800-HEATER3
• U.S. Customer Service ............................800-621-5622
• U.S. Fax ...................................................800-535-9538
• Canada Customer Service ......................800-268-6966
• Canada Fax..............................................800-200-5393
• Website ........................................................rheem.com
In keeping with its policy of continuous progress and product improvement,
Rheem-Ruud reserves the right to make changes without notice.
Rheem Water Heating and Heating & Cooling Products
101 Bell Road • Montgomery, AL 36117-4305
www.rheem.com
Rheem manufactures residential and commercial
heating & cooling and water heating products.
Rheem Canada Ltd./Ltée
125 Edgeware Road, Unit 1 • Brampton, Ontario, L6Y 0P5
Not all models are available in Canada.
Printed in U.S.A.
03/10 WP
Form No. RR105-2 Rev. 27
Commercial water heaters
from Rheem-Ruud
TABLE OF CONTENTS
COMMERCIAL GAS WATER HEATERS
SPIDERfire Models GHE100-130(A) thru GHE100-350(A).............
AdvantagePlus Models HE45-100 thru HE119-199 ........................
Universal Models G50-98 thru G100-400(A) ...................................
Universal Low NOx Models GN75-125 thru GN100-400(A)............
Xtreme Models GX90-550(A) thru GX90-715(A).............................
VentMaster Power Direct Vent Models GP100-150 & GP100-250(A)
Induced Draft GD100-250(A) thru GD100-360(A)...........................
Medium Duty Models G60-50 thru G100-80....................................
PowerVent GPV75-75E ...................................................................
Power Venter Kits ............................................................................
2-3
4-5
6-7
8-9
10-11
12-13
14-15
16-17
18-19
20-21
COMMERCIAL HOT WATER SUPPLY HEATERS
With Pump GBBP136 thru GBCP1826............................................ 22-23
Without Pump GBB136 thru GBC1826 ........................................... 22-23
COMMERCIAL ELECTRIC WATER HEATERS
Large Volume EVRO, EVS and EHSO Models ...............................
Heavy Duty ES50, ES85, ES120, E50(A), E85(A) and E120(A).....
PowerPack Heavy Duty E12A, E20A, E30A and E40A...................
Eclipse .............................................................................................
Booster E10 .....................................................................................
Light Duty Models ELD30 thru ELD120...........................................
Light Duty Models ELDS30 thru ELDS52........................................
Point-of-Use EGSP2 thru EGSP30 .................................................
24-25
26-27
28-29
30-31
32-33
34-35
34-35
36-37
INDIRECT WATER HEATERS ........................................................ 38-39
COMMERCIAL STORAGE TANkS
ST80(A), ST120(A) and ST175(A) .................................................. 40-41
Large Volume Storage Tanks........................................................... 42-43
CertiSpec 3.2 on Internet Download ............................................ 44-45
COMPETITOR CROSS REFERENCE INDEX
Dimensions reflect models built prior to 1/20/04.
A.O. SMITH
Gas – Tank Type BTR & BTH (Cyclone).......................................... 46-47
Gas – Hot Water Supply Heaters BC, HW & DW............................ 48-49
Storage Tank Systems TJ, TJV........................................................
49
Electric – Light/Heavy Duty & Boosters
DEL, DEN, DRE, DVE, CMC, SU ................................................ 50-51
AMERICAN
Gas – Tank Type PVCG32, CG32, DCG32, PVDCG32, DCG31.... 52-53
Electric – Light/Heavy Duty LDCE, ITCE,STCE, AITCE, ASTCE.... 54-55
Storage Tank Systems CST, ACST..................................................
55
BRADFORD WHITE
Gas – Tank Type .............................................................................. 56-57
Gas – Hot Water Supply Heaters L-I-T1.......................................... 58-59
Storage Tank Systems M-3-ST........................................................
59
Electric – Light/Heavy Duty Booster
M-II-SF-CF, LI............................................................................... 60-61
LOCHINVAR
Gas – Tank Type CNR, CNA ........................................................... 62-63
Gas – Hot Water Supply Heaters
CPN, RWN, CWN ........................................................................ 64-65
Storage Tank Systems RJS, RJA ....................................................
65
Electric – Light/Heavy Duty & Boosters
ETX, ETW, ESX, ETX, SB, HS, HC............................................. 66-67
STATE
Gas – Tank Type SBT, SBF ............................................................. 68-69
Electric – Light /Heavy Duty CPE, SB6 ........................................... 70-71
Storage Tank Systems PV ...............................................................
71
2
SPIDERfire® Sealed Combustion Gas-Fired 130,000 – 350,000 BTU/HR.
INTAKE
SPIDERfire Features:
(On Selected
Models)
(With Optional
Kit)
•
•
•
•
•
•
•
•
•
•
•
Maximum thermal efficiency of 95% dramatically reduces operating costs
No chimney required; power or direct vent using plastic pipe
Low NOx emissions. Meets SCAQMD Rule 1146.2
Corrosion resistant, high efficiency 3-pass heat exchanger
Self-diagnostic LCD electronic control
Direct spark ignition
185° F maximum temperature setting
Zero clearance to all combustible surfaces
Full flow drain valve
Front and back water connectioins
Factory installed AGA/ASME rated T&P relief valve
EXHAUST
TEMP
SENSOR
T&P
31°
DRAIN VALVE
31°
42°
41°
TOP VIEW
GAS INLET
EXHAUST
AIR INTAKE
HOT OUT
REAR
T&P
HOT OUT
FRONT
A
C
F
H
COLD IN
FRONT
G E
HAND HOLE
CLEANOUT
DRAIN
VALVE
COLD IN
REAR
D
B
LEFT SIDE
RECOVERy CAPACITIES
MODEL
NuMBER
FRONT
RIGHT SIDE
REAR
DIMENSIONAL INFORMATION All dimensions shown in inches
INPuT (BTu/HR) THERMAL
NAT. & LP
EFFICIENCy uNITS
TEMP. RISE – GPH
40°F
100°F
140°F
A
B
C
D
E
F
G
H
VENT
WATER CONNECTS
INLET
OuTLET
APPROX.
SHIP. WT. (LB)*
GHE100-130(A)
130,000
95%
GPH
374
150
107
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72-7/16
66-7/16
2, 3, 4
2" NPT
2" NPT
785
GHE100-160(A)
160,000
95%
GPH
461
184
132
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72-7/16
66-7/16
2, 3, 4
2" NPT
2" NPT
785
GHE100-200(A)
199,000
95%
GPH
573
229
164
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72-7/16
66-7/16
2, 3, 4
2" NPT
2" NPT
785
GHE100-250(A)
250,000
93%
GPH
705
282
201
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72-7/16
66-7/16
3, 4
2" NPT
2" NPT
825
GHE100-300(A)
300,000
93%
GPH
845
338
242
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72-7/16
66-7/16
3, 4
2" NPT
2" NPT
825
GHE100-350(A)
350,000
92%
GPH
976
390
279
78-3/4
26-1/4†
66
12-3/4
73-3/4
73-5/8
72-7/16
66-7/16
3, 4
2" NPT
2" NPT
825
*Weights listed are for non-ASME. Add 35 lbs. for ASME models.
130,000 - 199,000 BTU models are certified to be installed with 2" venting.
All models require a 120V power source.
See use and care manual for venting details.
†Overall width is 27-5/16" due to exhaust cover.
0" CLEARANCE TO COMBUSTIBLES
MODELS WITH INPUTS OF 130,000 BTU THRU 199,000 BTU ARE CERTIFIED TO VENT WITH 2" SCHEDULE
40 PVC, CPVC OR ABS PIPE
(FOR CANADIAN INSTALLATIONS, PLEASE USE ULC-S636 PVC AND CPVC PIPE.)
3
4
AdvantagePlus™ Sealed Combustion Gas 100,000 – 199,000 BTU/HR.
AdvantagePlus Features:
• 316L stainless steel tank
construction (requires no
anode rods).
• No chimney required; direct vent
using plastic pipe.
• Thermal efficiency of 95%
dramatically reduces operating
costs.
• 85 equivalent feet of vent length.
• Low NOx emissions. Meets
SCAQMD Rule 1146.2.
• High impact plastic jacket
eliminates dents.
• 2” of non-CFC, polyurethane
foam insulation.
• Less than 1/2 degree per hour
heat loss (R17).
• Corrosion resistant, high
efficiency 90/10 cupronickel heat
exchanger.
• Self-diagnostic electronic control
with digital readout for water
temperature, set point and
differential.
• Removable front cover allows
easy access to equipment (24"
service clearance
recommended).
• Temperature range from 70°F to
160°F (maximum temperature
setting of 180°F available on
HE55-160 and HE55-199 booster
models only).
• Zero clearance to all combustible
surfaces.
• Factory installed AGA/ASME
rated T&P relief valve.
• Booster installation kit provided
with HE55-160 and HE55-199
booster models.
CAP.
GALS.
55
55
80
119
55
80
119
55
80
119
INPUT (BTU/HR.)
NAT. & LP
100,000
130,000
130,000
130,000
160,000
160,000
160,000
199,000
199,000
199,000
THERMAL
EFFICIENCY
95%
95%
95%
95%
95%
95%
95%
95%
95%
95%
40°
288
374
374
374
461
461
461
573
573
573
TEMPERATURE RISE – DEGREES F – GALLONS PER HOUR
50°
60°
70°
80°
90°
100°
110°
120° 130°
230
192
165
144
128
115
105
96
N/A
299
249
214
187
166
150
136
125
N/A
299
249
214
187
166
150
136
125
N/A
299
249
214
187
166
150
136
125
N/A
368
307
263
230
205
184
167
154
142
368
307
263
230
205
184
167
154
N/A
368
307
263
230
205
184
167
154
N/A
458
382
327
286
255
229
208
191
176
458
382
327
286
255
229
208
191
N/A
458
382
327
286
255
229
208
191
N/A
140°
N/A
N/A
N/A
N/A
132
N/A
N/A
164
N/A
N/A
The recovery rate is based on recovery efficiencies obtained in a UL certified laboratory. These models have been tested according to ANSI Z21.10.3 test procedures and
exceed the thermal efficiency and standby loss requirements of ASHRAE (part of the Federally mandated Energy Policy Act - EPACT). These models also exceed
the energy efficiency codes of all states including the California Energy Commission (CEC). All models are North Carolina Code compliant.
DIMENSIONAL INFORMATION
MODEL
NUMBER
HE55-100*
HE55-130*
HE80-130*
HE119-130*
HE55-160
HE80-160
HE119-160
HE55-199
HE80-199
HE119-199
A B C D E
52
52
72
73
52
72
73
52
72
73
23-1/2
23-1/2
23-1/2
27
23-1/2
23-1/2
27
23-1/2
23-1/2
27
32
32
32
36
32
32
36
32
32
36
45
45
65
66-3/4
45
65
66-3/4
45
65
66-3/4
5
5
5
6-3/4
5
5
6-3/4
5
5
6-3/4
(All dimensions shown in inches)
F
25-1/4
25-1/4
25-1/4
28-7/8
25-1/4
25-1/4
28-7/8
25-1/4
25-1/4
28-7/8
VENT
2*
2*
2*
2*
3
3
3
3
3
3
Hot Out
Gas Inlet
AD
Electrical
Connection
F
Cold In
E
3.75”
C
Condensate Connection
(All models require 120V power source.)
RECOVERY CAPACITIES
MODEL
NUMBER
HE55-100*
HE55-130*
HE80-130*
HE119-130*
HE55-160
HE80-160
HE119-160
HE55-199
HE80-199
HE119-199
B
WATER CONNECTIONS
INLET
OUTLET
1
1
1
1
1-1/2
1-1/2
1-1/2
1-1/2
1
1
1-1/2
1-1/2
1-1/2
1-1/2
1
1
1-1/2
1-1/2
1-1/2
1-1/2
APPROX. SHIPPING
WEIGHT (LBS.)
175 lbs.
175 lbs.
235 lbs.
405 lbs.
175 lbs.
235 lbs.
405 lbs.
175 lbs.
235 lbs.
405 lbs.
CLEARANCE TO
COMBUSTIBLES
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
The HE55-160 and HE55-199 Booster
models are the only models equipped
with a 180°F thermostat. Models with
180°F thermostats come standard with
the Booster Installation kit which includes
all necessary components for an approved
installation.
BOOSTER INSTALLATION kIT INCLUDES:
• Nibco Tee – 1" x 1" x 1/2" (2 pieces)
• Female Adapter – 1" (2 pieces)
• Dial Thermometer (2 pieces)
• Expansion Tank – 4-1/2 gallon
• Grundfos 3 Speed Pump with Check Valve
• Nibco 1.2" x 12" Fitting Air Chamber
• Vacuum Relief Valve
• Pressure Gauge – 0-200 PSI
• Nibco Tee 712R – 1" x 1" x 3/4" (2 pieces)
• Nibco Tee 714RR – 1" x 1/2" x 1"
• Nibco Tee – 1" x 1/2" x 1" Copper
• Reducing Coupling
• Pressure Reducing Valve
• Nibco Male Adapter – 1"
*The models with inputs of 100,000 kBtu and 130,000 kBtu are certified to vent with 2" Schedule 40 PVC, CPVC or ABS pipe. (For Canadian models, vent with 2" ULC-S636 PVC or CPVC pipe)
Use HEC prefix for Canadian models.
5
6
Universal™ Heavy Duty Gas 98,000 – 400,000 BTU/HR.
Universal Features:
• Factory installed AGA/ASME
rated T&P relief valve
• Handhole cleanout
• Stainless steel burners
• 180° max operating
temperature
• LED diagnostics on all damper
assemblies for easier service
• Certified for a 150 PSI
maximum working pressure
(160 PSI for ASME models)
• Manual reset high limit
(ASME models)
• Low NOx models available
• Small jacket diameters
• Short floor-to-vent heights
• Multiple water connections
• System Sentinel™ LED
diagnostic system
Standard Features:
(On Selected
Models)
(With Optional
Leg Kit)
• 3 year limited tank warranty
• Patented multiflue design
• Low profile automatic flue
damper
• Spark-to-pilot ignition
system
• Full port, full flow brass
drain valve
GAL. INPUT BTU/HR.
CAP. NATURAL & L.P.
G50-98
G75-125
G82-156
G76-180
G37-200
G76-200
G91-200
G100-200(A)
G72-250(A)
G100-250(A)
G100-270(A)
G72-300(A)
G85-300(A)
G100-310(A)
G65-360(A)
G65-400(A)
G85-400(A)
G100-400(A)
50
75
82
76
35
76
91
100
72
100
100
72
85
100
65
65
85
100
98,000
125,000
156,000
180,000
199,900
199,900
199,900
199,900
250,000
250,000
270,000
300,000
300,000
310,000
360,000
399,900
399,900
399,900
OUTLET
REAR SIDE
INLET
TOP
OUTLET
FRONT SIDE
T&P
C
INLET
FRONT SIDE
F B A
SYSTEM
SENTINEL
G
INLET
REAR SIDE
D
7"
(178mm)
DIMENSIONAL INFORMATION (All dimensions shown in inches)
RECOVERY CAPACITIES
MODEL
NUMBER
H
E
OUTLET
TOP
THERMAL
EFFICIENCY
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
80%
TEMP. RISE - GPH
40°
100°
140°
238
95
68
303
121
87
378
151
108
436
175
125
485
194
138
485
194
138
485
194
138
485
194
138
606
242
173
606
242
173
654
262
187
727
291
208
727
291
208
752
301
215
873
349
249
969
388
277
969
388
277
969
388
277
A B C D E F G H
62-3/4
65-1/2
68-13/16
68-13/16
49-1/4
68-13/16
76-5/16
73-1/16
71-1/16
73-1/4
73-7/8
71
78-7/16
75
70-11/16
70-11/16
78-13/16
76
57-1/8
61
64
64
43-3/8
64
71-13/16
66-1/8
64-1/2
66-1/8
66-1/8
64-1/2
72-5/16
68-1/2
64-1/2
64-1/2
72-5/16
68-1/2
22-1/2
26-1/4
26-1/4
26-1/4
26-1/4
26-1/4
26-1/4
30-1/4
26-1/4
30-1/4
30-1/4
26-1/4
26-1/4
30-1/4
26-1/4
26-1/4
26-1/4
30-1/4
22-5/8
25
25
25
25
25
30-5/8
23-1/4
25
23-1/4
23-1/4
25
30-5/8
32-1/4
25
25
30-5/8
32-1/4
5
5
6
6
6
6
6
6
6
8
8
8
8
7
8
8
10
8
50-1/2
56
58-5/8
58-5/8
37-5/8
58-5/8
66-3/8
57-1/2
58-5/8
57-1/2
57-1/2
58-5/8
66-3/8
61-3/4
58-5/8
58-5/8
66-3/8
61-3/4
1/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1*
15
20
20
20
20
20
20
23
20
23
23
20
20
23
N/A
N/A
20
23
WATER CONNECTIONS
TOP
FRONT REAR
IN/OUT SIDE
SIDE
1
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
1-1/2
2
2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
N/A
1-1/2
1-1/2
N/A
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
APPROX. SHIPPING
WEIGHT (LBS.)
STANDARD ASME
270
N/A
480
N/A
490
N/A
540
N/A
405
N/A
540
N/A
600
N/A
780
835
590
630
795
835
805
845
590
630
640
680
770
810
640
680
640
680
640
680
770
810
CLEARANCES TO
COMBUSTIBLES
SIDE
REAR
TOP
2"
2"
12"
2"
2"
12"
2"
2"
12"
2"
2"
12"
2"
2"
12"
2"
2"
12"
2"
2"
12"
2"
4"
12"
6"
6"
12"
2"
4"
12"
2"
4"
12"
6"
6"
12"
6"
6"
12"
4"
4"
12"
6"
6"
12"
6"
6"
12"
6"
6"
12"
4"
4"
12"
Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. Thermal Efficiency in accordance with ANSI Z21.10.3 labeling requirements.
“(A)” Indicates Available ASME Model. *3/4" for L.P. Models. Increase Height 3-5/8" for NSF Models. All Models Require a 120V Power Source.
These models have been tested according to ANSI test procedures, and exceed the thermal efficiency and standby loss requirements of ASHRAE (Part of the Federally mandated Energy Policy Act (EPact)).
Also exceeds energy efficiency codes of all states including California Energy Commission (CEC). All models are North Carolina Code compliant.
7
8
Universal™ Heavy Duty Gas Low NOx 125,000 – 400,000 BTU/HR.
Universal Features:
• Small jacket diameters
• Short floor-to-vent heights
• Multiple water connections
• System Sentinel™ LED diagnostic
system
(On Selected
Models)
Standard Features:
• 3 year limited tank warranty
• Patented multiflue design
• Low profile automatic flue damper
• Spark-to-pilot ignition system
• Full port, full flow brass drain valve
• Factory installed AGA/ASME rated
T&P relief valve
• Handhole cleanout
• 180° max operating temperature
• Certified for a 150 PSI maximum
working pressure (160 PSI for ASME
models)
• Manual reset high limit (ASME
models)
• Low NOx Burner – The Power Assist
enclosed burner design incorporates
stainless steel multi-port burner
tubes for long term Low NOx compliant performance. A sight glass allows
for burner observation and the entire
assembly is easily removable.
A blower guard is provided against
post-installation damage. The entire
design is highly resistant to the
effects of negative air pressures
common to modern commercial
buildings.
OUTLET
TOP
OUTLET
REAR SIDE
H
E
OUTLET
FRONT SIDE
INLET
TOP
T&P
C
INLET
FRONT SIDE
F B A
SYSTEM
SENTINEL
G
INLET
REAR SIDE
D
7"
(178mm)
DIMENSIONS (Inches)
A
MODEL
NUMBER
GN75-125
65-1/2
GN82-156
68-13/16
GN37-200
49-1/4
GN76-200
68-13/16
GN91-200
76-5/16
GN100-200(A) 73-1/16
GN72-250(A)
71-1/16
GN100-250(A) 73-1/4
GN100-270(A) 73-7/8
GN65-360(A) 70-11/16
GN100-400(A)
76
B61
64
43-3/8
64
71-13/16
66-1/8
64-1/2
66-1/8
66-1/8
64-1/2
68-1/2
C
26-1/4
26-1/4
26-1/4
26-1/4
26-1/4
30-1/4
26-1/4
30-1/4
30-1/4
26-1/4
30-1/4
D
E5 F
G
H20
25
56
3/4
25
25
25
30-5/8
23-1/4
25
23-1/4
23-1/4
25
32-1/4
6
6
6
6
6
6
6
6
8
8
58-5/8
37-5/8
58-5/8
66-3/8
57-1/2
58-5/8
57-1/2
57-1/2
58-5/8
61-3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1
20
20
20
20
23
20
23
23
N/A
23
WATER CONNECTIONS
TOP
FRONT REAR
IN/OUT
SIDE
SIDE
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
1-1/2
2
2
N/A
1-1/2
1-1/2
1-1/2
2
2
APPROXIMATE
SHIPPING WEIGHT
STD.
ASME
480 lbs.
N/A
490 lbs.
N/A
405 lbs.
N/A
540 lbs.
N/A
600 lbs.
N/A
780 lbs.
835 lbs.
590 lbs.
630 lbs.
795 lbs.
835 lbs.
805 lbs.
845 lbs.
640 lbs.
680 lbs.
770 lbs.
810 lbs.
All Models Require a 120V /1.5 Amp Power Source. (A) Suffix Indicates ASME Tank Construction Available.
9
10
Xtreme™ High-Input Gas 550,000 – 715,000 BTU/HR.
Xtreme Features:
C
®
US LISTED
• Small jacket diameters
• Short floor-to-vent heights
• Multiple water connections
• System Sentinel™ LED diagnostic
system
Standard Features:
• 3 year limited tank warranty
• Patented multiflue design
• Low profile automatic flue damper
• Specialized burner assembly
• Spark-to-pilot ignition system
• Full port, full flow brass
drain valve
RECOVERY CAPACITIES
MODEL
NUMBER
GX90-550(A)
GX90-640(A)
GX90-715(A)
GX90-500(A) LP
GX90-600(A) LP
GX90-680(A) LP
• Factory installed AGA/ASME rated
T&P relief valve
• Handhole cleanout
• Round premix stainless steel
burners
• Manual reset high limit
• Certified for a 150 PSI maximum
working pressure (160 PSI for
ASME models)
• Low NOx models:
GX90-550(A)
GX90-640(A)
C
E
OUTLET
FRONT SIDE
T&P
F BA
INLET
FRONT SIDE
SYSTEM
SENTINEL
D
G
Recovery in U.S. Gallons/Hr. (GPH) at Various Temperature Rises.
INPUT BTU/HR.
NATURAL & L.P.
550,000 NAT
640,000 NAT
715,000 NAT
500,000 LP
600,000 LP
680,000 LP
THERMAL
EFFICIENCY
80%
80%
80%
80%
80%
80%
40°F
1333
1551
1733
1212
1455
1649
50°F 60°F
1067 889
1241 1034
1387 1156
970 808
1164 970
1319 1099
70°F
762
887
991
693
831
942
80°F 90°F 100°F 110°F
667 593 533 485
776 690 621 564
867 770 693 630
606 539 485 441
727 647 582 529
824 733 659 599
120°F
444
517
578
404
485
550
130°F
410
477
533
373
448
507
140°F
381
443
495
346
416
471
Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. These models have been tested according to ANSI Z21.10.3 test procedures, and exceed
the thermal efficiency and standby loss requirements of ASHRAE (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states.
(A) indicates available ASME model.
DIMENSIONAL INFORMATION
MODEL
NUMBER
GX90-550(A)
GX90-640(A)
GX90-715(A)
GX90-500(A) LP
GX90-600(A) LP
GX90-680(A) LP
A
74.5
74.5
74.5
74.5
74.5
74.5
(All dimensions shown in inches)
B
68
C
D
E
30
25
10
F59 G1
68
68
68
68
68
30
30
30
30
30
59
59
59
59
59
25
25
25
25
25
10
10
10
10
10
All Models Require a 120V Power Source. (A) Suffix Indicates ASME Tank Construction Available.
1
1
1
1
1
WATER CONNECTIONS
FRONT
REAR
SIDE
SIDE
2
2
2
2
2
2
2
2
2
2
2
2
APPROXIMATE
SHIPPING WEIGHT
STD.
ASME
905
945
905
945
905
945
905
945
905
945
905
945
11
12
VentMaster™ Power Direct Vent Gas 150,000 – 250,000 BTU/HR.
Standard Features:
• Non-condensing design
• Integral automatic blower
• Patented multi-flue tank design
• Spark-to-pilot ignition system
• System Sentinel™ LED diagnostic
system
• Full port, full flow brass drain valve
• No masonry or metal vent
chimney required
• Installs with 3" or 4" schedule
40 PVC pipe
• Vents up to 50 feet
E
C
INPUT
BTU/HR.
150,000
199,900
250,000
40°F
364
485
606
50°F
291
388
485
60°F
242
323
404
70°F
208
277
346
80°F
182
242
303
GPH
90°F
161
215
269
A
D
RECOVERY CAPACITIES (80% thermal efficiency)
MODEL
NUMBER
GP100-150
GP100-200
GP100-250(A)
F
B
CLEARANCE TO
COMBUSTIBLES (inches)
100°F 110°F 120°F 130°F 140°F
146
132
122
112 104
194
176
162
149 138
242
220
202
186 173
MODEL
NUMBER
SIDE REAR TOP
6"
18"
GP100-150
2"
GP100-200
51mm
GP100-250(A)
153mm 459mm
FIRST TIME DELIVERY (Includes useable storage and recovery for indicated times.)
MODEL
NUMBER
GP100-150
GP100-200
GP100-250(A)
TANk CAP.
GALLONS
100
100
100
INPUT
BTU/HR.
150,000
199,900
250,000
5
Minutes
82
86
90
10
Minutes
94
102
110
TEMP. RISE AT 100°F IN GALLONS
15
20
30
Minutes
Minutes
Minutes
106
119
143
118
135
167
131
151
191
45
Minutes
179
215
252
60
Minutes
216
264
312
Minutes
to Rec.
Contents
40
31
25
DIMENSIONS (Inches)
MODEL
NUMBER
GP100-150
GP100-200
GP100-250(A)
A
B
C
D
E
F
G
81-3/4
81-3/4
81-3/4
68-1/4
68-1/4
68-1/4
30-1/4
30-1/4
30-1/4
24-3/4
24-3/4
24-3/4
3
3
4
59
59
59
3/4
3/4
3/4
WATER CONNECTIONS
FRONT
REAR
IN/OUT
SIDE
2
2
2
2
2
2
APPROXIMATE
SHIPPING
WEIGHT
860 lbs.
860 lbs.
860 lbs.
Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. These models have been tested according to ANSI Z21.10.3 test procedures, and exceed the thermal efficiency and
standby loss requirements of ASHRAE (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states. (A) indicates available ASME model.
13
14
Induced Draft Gas 250,000 – 360,000 BTU/HR.
Universal Features:
• 6" Category I appliance –
allows for easy upgrade or
retrofit of existing applications
• Spark-to-pilot ignition
system
• Full port, full flow brass
drain valve
• Small jacket diameters
• Short floor-to-vent heights
• Multiple water connections
• System Sentinel™ LED
diagnostic system
OUTLET
REAR SIDE
Standard Features:
(On Selected
Models)
(With Optional
Leg Kit)
H
E
OUTLET
TOP
INLET
TOP
OUTLET
FRONT SIDE
T&P
C
• 3 year limited tank warranty
• Patented multiflue design
• Factory installed draft inducer –
provides an induced draft
allowing higher BTU's to be
vented through a 6" vent
INLET
FRONT SIDE
F B A
SYSTEM
SENTINEL
G
INLET
REAR SIDE
D
7"
(178mm)
RECOVERY CAPACITIES
MODEL
NUMBER
Recovery in U.S. Gallons/Hr. (GPH) at Various Temperature Rises.
INPUT BTU/HR.
NATURAL & L.P.
THERMAL
EFFICIENCY
UNITS
40°F
50°F
60°F
70°F
250,000
270,000
310,000
360,000
80%
80%
80%
80%
GPH
GPH
GPH
GPH
606
655
752
873
485
524
601
698
404
436
501
582
346
374
429
499
GD100-250(A)
GD100-270(A)
GD100-310(A)
GD100-360(A)
80°F 90°F 100°F 110°F 120°F 130°F 140°F
303
327
376
436
269
291
334
388
242
262
301
349
220
238
273
317
202
218
251
291
186
201
231
269
173
187
215
249
Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. These models have been tested according to ANSI Z21.10.3 test procedures, and exceed
the thermal efficiency and standby loss requirements of ASHRAE (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states.
(A) indicates available ASME model.
DIMENSIONAL INFORMATION All Dimensions Shown in English.
MODEL
NUMBER
UNITS
A
B
GD100-250(A)
GD100-270(A)
GD100-310(A)
GD100-360(A)
inches
inches
inches
inches
73-1/2
73-1/2
73-1/2
73-1/2
66-3/4
66-3/4
66-3/4
66-3/4
C D E F G H
30-1/4
30-1/4
30-1/4
30-1/4
23-1/4
23-1/4
23-1/4
23-1/4
6
6
6
6
57-1/2
57-1/2
57-1/2
57-1/2
All models require a 120V /3 amp power source. (A) suffix indicates ASME tank construction available.
3/4
3/4
3/4
3/4
23
23
23
23
WATER CONNECTIONS
TOP
FRONT REAR
IN/OUT
SIDE
SIDE
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
2
APPROXIMATE
SHIPPING WEIGHT
STD.
ASME
795 lbs.
795 lbs.
795 lbs.
795 lbs.
835 lbs.
835 lbs.
835 lbs.
835 lbs.
15
16
Medium-Duty Gas 45,000 – 80,000 BTU/HR.
Standard Features:
• Small jacket diameters
• Short floor-to-vent heights
• 3 year limited tank warranty
• Rigid foam insulation
• Heavy duty anode rod
• Factory installed AGA/ASME rated
T&P relief valve
• Brass drain valve
• Gas control system
• Certified for a 150 PSI maximum
working pressure
• Low NOx models available – N Models
(with
optional
leg kit)
F
F
E
E
C
A B
3/4"
T&P
3/4" N.P.T.
RELIEF
VALVE
OPENING
HOT & COLD
A
G
B
C
SIDE TAPS
G
1/2" GAS
CONNECTION
1/2"
D
2"
D
G50-65, G60-50 & G75-75
G100-80
SIDE TAPS ON 50 & 75 GAL. MODELS ONLY
WATER CONNECTIONS
ARE 1" NPT
G50-65 & G60-50 WATER
CONNECTIONSARE 3/4" NPT
G75-75 WATER CONNECTIONS
ARE 1" NPT
RECOVERY CAPACITIES
MODEL
NUMBER
CAP.
GALS.
INPUT
BTU/HR.
GAS
TYPE
G60-50N†*
G60-50LP*
G50-65N†*
G50-65LP*
G75-75N-2†*
G75-75LP*
G100-80
G100-80N†
60
60
48
48
75
75
100
100
Natural
LP
Natural
LP
Natural
LP
Natural
Natural
50,000
45,000
65,000
48,000
75,100
65,000
80,000
76,000
TEMPERATURE RISE – DEGREES F – GALLONS PER HOUR
40°
115
104
150
111
182
150
194
184
50°
92
83
120
88
146
120
155
147
60°
77
69
100
74
121
100
129
123
70°
66
59
86
63
104
86
111
105
80°
58
52
75
55
91
75
97
92
90°
51
46
67
49
91
67
86
82
100°
46
41
60
44
73
60
78
74
110°
42
38
54
40
66
54
71
67
120°
38
35
50
37
61
50
65
61
130°
35
32
46
34
56
46
60
57
CLEARANCES TO
COMBUSTIBLES
MODEL REAR/
NUMBER SIDES FRONT TOP
G60-50
1"
3"
2"
G50-65
0"
3"
2"
G75-75
1"
3"
2"
G100-80
1"
Alcove 12"
Recovery rating is based on recovery efficiencies obtained in a CSA certified laboratory. N = Low NOx
DIMENSIONAL INFORMATION (All dimensions shown in inches)
MODEL
NUMBER
G60-50
G50-65
G75-75
G100-80
A
62
62-1/2
64
69-5/8
B
58
58-1/2
60
65-3/4
C
23
21-3/4
26-1/4
28-1/4
D
13-1/4
14
13-1/4
11
E
4
4
4
4
F
8
11
11
15
G
48-1/2
51-3/4
53-1/4
57-13/16
APPROX. SHIPPING
WEIGHT (LBS.)
180
180
320
410
NOTE: SPECIFICATIONS
SUBJECT TO CHANGE
WITH FVIR MODELS
Note: Meets 40ng/J Low NOx requirements.
*FVIR compliant
†
17
18
PowerVent Gas 75,000 BTU/HR.
Standard Features:
• Uses 3" or 4" schedule 40 PVC, CPVC or ABS pipe
• Vents up to 95 feet
• Easy to install/maintain blower assembly
• Spark-to-pilot ignition system
• Low NOx burner
• Self-diagnostic thermostat/gas valve
• 2" rigid foam insulation
• 3 year limited warranty
• Factory installed AGA/ASME rated T&P relief valve
• Certified for a 150 PSI maximum working pressure
• Durable brass drain valve
• FVIR compliant
POWER VENT
ASSEMBLY
ANODE ROD
G
HOT
WATER
CONNECTION
G
E
COLD
WATER
CONNECTION
T&P FITTING
3/4" N.P.T.
C
A B
F
SIDE TAPS
1/2"
D
DIMENSIONAL INFORMATION (All dimensions shown in inches)
MODEL
NUMBER
GPV75-75FV-2
A
B
C
D
E
F
G
72
60-1/8
26-1/4
14-3/4
11
53-1/4
1
APPROX. SHIPPING
WEIGHT (LBS.)
330
RECOVERY CAPACITIES
MODEL
NUMBER
GPV75-75FV-2
GPV75-75PFV-2
INPUT BTU/HR.
NATURAL & L.P.
75,000
70,000
40°
173
161
TEMPERATURE RISE - DEGREES F - GALLONS PER HOUR
50°
60°
70°
80°
90°
100°
110°
138
115
99
86
77
69
63
129
107
92
81
72
64
59
120°
58
54
19
20
Power Vent kits Gas
Construction Features:
• Certified for use on natural and propane gas
TYPICAL APPLICATION
models.
• Maximum venting length up to 50 feet equivalent
including the vent terminal.
• Vent terminal can be installed through combustible
•
•
•
Manufactured by Tjernlund Products, Inc.,
Rheem-Ruud Commercial Gas Water Heater Power
Vent Kits are your best choice for new construction,
electric-to-gas conversions and renovations.
•
•
•
For technical assistance, please call the
Tjernlund Help Line at 1-800-255-4208.
Model
G50-98
G75-125
G82-156
G76-180
G37-200
G76-200
G91-200
G100-200(A)
G72-250(A)
G100-250(A)
G100-270(A)
G72-300(A)
G85-300(A)
G100-310(A)
G65-360(A)
G65-400(A)
G85-400(A)
G100-400(A)
GD100-250(A)
GD100-270(A)
GD100-310(A)
GD100-360(A)
Vent
kit
PV Kit 4
PV Kit 4
PV Kit 4
PV Kit 4
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
PV Kit 5
Draft
Part
Hood Vent Vent
No.
Outlet Size Adapter*
AP11646
5"
4"
5" x 4"
AP11646
5"
4"
5" x 4"
AP11646
6"
4"
6" x 4"
AP11646
6"
4"
6" x 4"
AP11646
6"
4"
Not Req.
AP11645
6"
6"
Not Req.
AP11645
6"
6"
Not Req.
AP11645
6"
6"
Not Req.
AP11645
6"
6"
Not Req.
AP11645
8"
6"
8" x 6"
AP11645
8"
6"
8" x 6"
AP11645
8"
6"
8" x 6"
AP11645
8"
6"
8" x 6"
AP11645
7"
6"
7" x 6"
AP11645
8"
6"
8" x 6"
AP11645
8"
6"
8" x 6"
AP11645
10"
6"
10" x 6"
AP11645
8"
6"
8" x 6"
AP11645
6"
6"
Not Req.
AP11645
6"
6"
Not Req.
AP11645
6"
6"
Not Req.
AP11645
6"
6"
Not Req.
*Note: Vent Pipe and Vent Adapter are NOT included.
Floor
or non-combustible surfaces – heat shield is
provided.
Vent terminal is constructed from heavy-duty
corrosion resistant aluminum.
Venter can be connected to a vent termination on an
exterior wall.
Vibration isolators are supplied to provide quiet
operation.
Safety interlocks standard.
Complete with mounting hardware.
Venter is pre-wired with 40 feet of #18-4 copper wire
(24 volt) to minimize field connections.
POWER VENTER (from Tjernlund)
VENT TERMINAL
Motor Motor Max Height Width Depth Inlet
kit# Watts Amps Vent (H)
(W)
(D) Outlet
4
95
1.26
50 ft 7-7/8"
11"
7"
5
170
1.51
50 ft 9-1/4" 11-5/8" 8-5/8"
Exterior
Wall
kit#
A
B
C
Rough in
Dimension
4"
4
9"
9-1/2"
7" Sq.
8" Sq.
6"
5
10-1/8"
9-1/2"
8-1/2" Dia.
9" Dia.
Note: Max Vent Length based on total length of straight vent pipe plus 10
feet for each 90 degree elbow and 5 feet for each 45 degree elbow.
B
D
H
W
A Sq.
C
Power vent kits manufactured by Tjernlund Products, Inc. are tested and
certified by CSA for use on these Rheem-Ruud Commercial Gas Heaters.
• Not for use with GN, GP, and GX models.
21
22
Hot Water Supply Heaters Gas 136,000 – 1,826,000 BTU/HR.
Standard Features:
• 82% thermal efficiency
• 5 year limited warranty
• Indoor and outdoor installations
• Meets ASHRAE standards
• Natural gas or L.P.
• Certified for a 160 PSI maximum
working pressure
Controls:
• Energy saving pump control
• Flow switch
• Spark-to-pilot ignition system
• High limit control
• On/Off switch
• Flue gas spillage sensor
• Flame roll-out sensor
Heat Exchanger:
• Finned copper tubes
• ASME steel tubesheet
• Silicon O-rings
• 125 PSIG ASME pressure relief
valve
• Glasslined cast iron headers
Gas Control Train:
• Manual gas shut-off cock
• Main gas pressure regulator
• Safety shut-off valve, redundant
• Control valve
SPECIFICATIONS AND DIMENSIONS
MODEL NUMBER
Without
With
Pump
Pump
STYLE
MBTUH PROPANE GAS†
MBTUH NATURAL GAS (X 1000)
InOutdoor door
(indoor)
Input Output
(outdoor)
Input
Output
DIMENSIONS (INCHES)
Temperature Rise –
Gallons Per Hour
40°F
100°F 140°F
Width
Height
Overall
Jac. Gas Flue
Ht. Conn. Dia.
GBB136*
GBBP136*
•
•
136.0
112.0
136.0
112.0
330
132
94
141⁄4
45.0
301⁄8
1
GBC186
GBCP186
•
•
181.0
148.0
181.0
148.0
445
178
127
181⁄4
40.0
38
3
GBC264
GBCP264
•
•
264.0
216.0
264.0
216.0
640
256
183
22 ⁄8
40.0
38
3
GBC331
GBCP331
•
•
334.0
274.0
334.0
274.0
822
328
235
253⁄4
40.0
38
3
GBC399
GBCP399
•
•
399.0
327.0
399.0
327.0
967
387
276
291⁄4
40.0
38
3
GBC512
GBCP512
•
•
511.5
419.4
511.5
419.4
1240
496
354
32 ⁄4
57.0
GBC627
GBCP627
•
•
627.0
514.1
627.0
514.1
1520
608
434
371⁄2
GBC726
GBCP726
•
•
726.0
595.4
726.0
595.4
1760
704
503
415⁄8
GBC825
GBCP825
•
•
825.0
676.5
825.0
676.5
2000
800
571
GBC926
GBCP926
–
•
–
–
926.0
759.3
3345
898
SHIPPING WEIGHT††
Model
Size
(Indoor) (Outdoor)
136-399
Same as natural gas
512-825
.94
926-1826
.92 Indoor
⁄2
6
195
195
⁄4
6
191
200
⁄4
7
214
220
⁄4
8
234
240
⁄4
9
253
260
33
1
10
510
535
57.0
33
1
12
520
545
57.0
33
1
12
630
685
453⁄4
57.0
33
1
14
660
720
641
523⁄8
–
–
1
–
–
790
3
3
GBC962
GBCP962
•
–
961.7
788.6
–
–
2331
933
665
523⁄8
683⁄4
331⁄2
1
14
760
–
GBC1083
GBCP1083
–
•
–
–
1083.0
888.1
2625
1050
750
591⁄4
–
–
1
–
–
850
GBC1125
GBCP1125
•
–
1124.7
922.2
–
–
2727
1091
779
59 ⁄4
74 ⁄2
33 ⁄2
1
16
800
–
GBC1178
GBCP1178
–
•
–
–
1178.0
966.0
2856
1142
816
635⁄8
–
–
1
–
–
910
GBC1223
GBCP1223
•
–
–
–
2964
1185
847
63 ⁄8
74 ⁄2
33 ⁄2
1
16
860
–
GBC1287
GBCP1287
–
•
1287.0
1055.3
3120
1248
891
685⁄8
–
–
11⁄4
–
–
975
GBC1337
GBCP1337
•
–
GBC1413
GBCP1413
–
•
GBC1467
GBCP1467
•
–
GBC1570
GBCP1570
–
•
GBC1630
GBCP1630
•
–
GBC1758
GBCP1758
–
•
GBC1826
GBCP1826
•
–
1222.5 1002.4
–
–
1336.6 1096.0
–
–
1467.0 1202.9
–
–
1630.0 1336.5
–
–
1825.6 1496.9
1
5
1
1
1
1
–
–
3240
1296
926
685⁄8
761⁄2
331⁄2
11⁄4
18
930
–
1413.0
1158.7
3425
1370
979
747⁄8
–
–
11⁄4
–
–
1065
–
–
3556
1423
1016
747⁄8
761⁄2
331⁄2
11⁄4
18
1000
–
1570.0
1287.4
3806
1522
1087
811⁄8
–
–
11⁄4
–
–
1120
–
–
3952
1581
1129
811⁄8
791⁄2
361⁄2
11⁄4
18
1040
–
1758.0
1441.6
4262
1705
1218
893⁄8
–
–
11⁄4
–
–
1150
–
–
4426
1770
1264
89 ⁄8
81 ⁄2
36 ⁄2
1 ⁄4
20
1090
–
3
1
1
1
Multiplier
.955 Outdoor (input)
.92 Outdoor (output)
Multiplier x Nat. MBTUH = Pro. MBTUH
†
ELECTRICAL RATINGS
Model
Size
††
With Pump
136-399
3.7 amps @ 120V (1/8 hp pump)
331-399
3.6 amps @ 120V (1/6 hp pump)
512-1826
7.2 amps @ 120V (1/2 hp pump)
Subtract 55 lbs. when ordering GBC models.
* Equipped with bronze headers, all other models
have glasslined cast iron headers.
GBC – cast iron headers.
GBB – bronze headers.
Add “N“ after model number for Low NOx
configuration on 186-399 models.
23
24
Large Volume High-Power Electric 12 KW – 900 KW
208, 240, 277,380, 415, 480 and 600 Voltages
Vertical Round,Vertical Square and Horizontal
High Power Energy Saving Performance
150 to 2,500 Gallon Storage
Rheem-Ruud large volume electric high power
commercial water heaters are now available in
150 to 2,500 gallon storage – vertical round, vertical
square and horizontal – with energy saving performance!
Construction Features:
• Glass lined steel tank
• Incoloy heating elements
• Internal fusing (above 120 amps)
• Magnesium anodes
• Immersion thermostat
• Manual reset high limit
• ASME temperature and pressure relief valve
• Channel iron skid base (except 150 & 200 gallon
round models)
• 180° F temperature operation
• 125 PSI working pressure
• Handhole cleanout
• 3 Year limited tank warranty
Optional Features:
• Low water cut-off
• Pilot lights
• Manual limiting switches
• Alarm bell
• Shunt trip disconnect (Field installed)
• Low or high water pressure switch
• Lifting lugs
• Time clock (7 day or 24 hour)
• Safety door interlock
• Temperature and pressure gauges
• Manway (250 gallon and larger only)
• 150 psi or 160 psi working pressure
• Electronic step controller
• Seismic attachment point (250 gallon and larger –
specify city, state and seismic zone)
Certification and Ratings:
• Efficiency – All models meet or exceed ASHRAE
energy efficiency standards.
• Safety and construction –
ASME construction and National Board listed UL
1453 listed
Dimensional Information
MODEL
NUMBER
VERTICAL ROUND
EVRO150
EVRO200
EVRO250
EVRO300
EVRO400
EVRO500
EVRO600
EVRO800
EVRO1000
VERTICAL SQUARE
EVS1250
EVS1500
EVS2000
EVS2500
HORIZONTAL
EHS0150
EHS0200
EHS0250
EHS0300
EHS0400
EHS0500
EHS0600
EHS0800
EHS1000
EHS1250
EHS1500
EHS2000
EHS2500
MAX.
KW
GALLON
CAPACITY
HEIGHT
WIDTH
DEPTH
HEIGHT TO
COLD INLET
WATER CONNECTION
INLET
OUTLET
APPROX. SHIP.
WEIGHT
144
162
162
162
162
396
396
396
396
150
200
250
300
400
500
600
750
950
65-1/2
78
92
80
80
92
92
104
128
32
32
34
40
46
46
52
52
52
38-3/4
38-3/4
40-3/4
46-3/4
52-3/4
52-3/4
60-3/4
60-3/4
60-3/4
7-3/4
7-3/4
19-1/2
21
22-1/2
22-1/2
24-1/2
24-1/2
24-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2-1/2
2-1/2
2-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2-1/2
2-1/2
2-1/2
650 lbs.
750 lbs.
1,165 lbs.
1,350 lbs.
1,590 lbs.
1,700 lbs.
2,010 lbs.
2,450 lbs.
3,160 lbs.
900
900
900
900
1,250
1,500
2,000
2,500
132-1/2
128-1/2
140-1/2
146-1/2
64-1/2
70-1/2
76-1/2
82-1/2
64-1/2
70-1/2
76-1/2
82-1/2
23-1/4
25-1/4
27-1/4"
29
3
3
3
3
3
3
3
3
3,560 lbs.
4,120 lbs.
4,350 lbs.
5,750 lbs.
144
180
225
270
360
450
540
720
900
900
900
900
900
150
200
250
300
400
500
600
750
1,000
1,250
1,500
2,000
2,500
37
37
39
45
52
52
58
58
58
64
70
76
82
68-1/2
78
90-1/4
78-1/4
78-1/4
90-3/4
90-3/4
102-1/4
126-1/4
130-1/4
126-1/4
137-1/4
144-1/4
34-1/4
34-1/4
36-1/4
42-1/4
48-1/4
48-1/4
54-1/4
54-1/4
54-1/4
60-1/4
66-1/4
72-1/4
78-1/4
12
12
13
14-3/4
16
16
13-1/2
13-/12
13-1/2
15
16
17-1/2
16-1/2
2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
3
3
3
3
2
2
2
2
2
2
2
2
2
3
3
3
3
1,180 lbs.
1,370 lbs.
1,450 lbs.
1,530 lbs.
1,750 lbs.
1,860 lbs.
2,340 lbs.
2,850 lbs.
3,040 lbs.
3,750 lbs.
4,340 lbs.
4,580 lbs.
6,060 lbs.
• Vertical round models above 90 KW at
208V, 240V, or 380V and 162 KW at
415V, 480V or 600V exceed the
capacity of a single control box and
may require mulitple control panels.
Consult the factory for specific details
and optional construction.
• Vertical square construction is
available as an option for models that
exceed the listed KW limits.
• Control panel heights on vertical round
models may exceed tank height –
consult factory for specific heights on
models with inputs above 72 KW.
25
26
Heavy-Duty Electric 6 KW – 81 KW
Standard Features:
• System Sentinel™ L.E.D.
diagnostic system
• Surface mounted and
immersion thermostat models
available
• Lifeguard stainless steel
elements
• 208, 240, 277 and 480 voltages
• 3 year limited tank warranty
• Manual reset high limit control
• Magnetic contactors and
integral fusing
• 1-1/2" NPT inlet/outlet dielectric
nipples factory installed
• 3" Rigid foam insulation
(With Optional
Seal Kit)
• Heavy duty anode rods
• Full port, full flow, brass drain
valve
• Factory installed AGA/ASME
rated T&P relief valve
• Certified for a 150 PSI
maximum working pressure
(160 PSI for ASME models)
In accordance with ANSI test
procedures, these models
tested below the maximum allowable standby loss levels of
ASHRAE (Part of the Federally
mandated Energy Policy Act
(EPact)). Also exceeds energy
codes of all states including
California Energy Commission
(CEC).
11/2"
HOT OUTLET
NIPPLE
B
SYSTEM SENTINEL
A
AUTOMATIC
TEMPERATURE
CONTROL
(IMMERSION ONLY)
361/8"
11/2"
COLD INLET
NIPPLE
5"
RECOVERY CAPACITIES
SURFACE MOUNTED THERMOSTATS
Tank Capacity In Gallons
50
85
120
ES85-6-G
ES85-9-G
ES85-12-G
ES85-15-G
ES85-18-G
ES85-24-G
ES85-27-G
ES85-30-G
ES85-36-G
ES85-45-G
ES85-54-G
N/A
D
Options:
• UL Sanitation compliant models
available
• Thermostat staging
• ASME construction available on
E models
MODEL NUMBERS
ES50-6-G
ES50-9-G
ES50-12-G
ES50-15-G
ES50-18-G
ES50-24-G
ES50-27-G
ES50-30-G
ES50-36-G
ES50-45-G
ES50-54-G
N/A
C
IMMERSION THERMOSTATS
Tank Capacity In Gallons
50
85
120
ES120-6-G
ES120-9-G
ES120-12-G
ES120-15-G
ES120-18-G
ES120-24-G
ES120-27-G
ES120-30-G
ES120-36-G
ES120-45-G
ES120-54-G
N/A
E50-6-G
E50-9-G
E50-12-G
E50-15-G
E50-18-G
E50-24-G
E50-27-G
E50-30-G
E50-36-G
E50-45-G
E50-54-G
N/A
E85-6-G
E85-9-G
E85-12-G
E85-15-G
E85-18-G
E85-24-G
E85-27-G
E85-30-G
E85-36-G
E85-45-G
E85-54-G
E85A-81-GS
INPUT
kW
E120-6-G
E120-9-G
E120-12-G
E120-15-G
E120-18-G
E120-24-G
E120-27-G
E120-30-G
E120-36-G
E120-45-G
E120-54-G
E120A-81-GS
6
9
12
15
18
24
27
30
36
45
54
81
DIMENSIONAL INFORMATION(All dimensions shown in inches)
MODEL
NUMBER
E(S)50
E(S)85
E(2)120
A
B
C
D
43-5/8
57-11/16
67-5/8
26-1/4
28-1/4
30-1/4
32
34
36
17-1/4
18-1/4
19-1/4
*ASME construction available only on Immersion Thermostat Models.
APPROX. SHIPPING
WEIGHT (LBS.)
STD.
ASME*
270
320
350
380
430
460
TEMPERATURE RISE – DEGREES F – GPH
EQUIVALENT
BTU/HR.
40°
62
92
123
154
184
246
276
307
369
461
553
838
20,473
30,709
40,946
51,182
61,418
81,891
92,128
102,364
122,837
153,546
184,256
276,388
60°
41
61
82
102
123
164
184
205
246
307
369
558
80°
31
46
61
77
92
123
138
154
184
230
276
419
100°
25
37
49
61
74
98
111
123
147
184
221
335
120°
21
31
41
51
61
82
92
102
123
154
184
279
140°
18
26
35
44
53
70
79
88
105
132
158
239
WATER TEMPERATURE RATINGS
Model
Number
Thermostat
Type
ES50
Surface
ES85, ES120
Surface
E50, E85, E120 Immersion
All models are North Carolina Code compliant.
Minimum
Delivered
Temperature
90°F
120°F
90°F
Maximum
High
Delivered
Temperature
Temperature
Limit
160°F
160°F
190°F
180°F
190°F
200°F
27
28
PowerPack™ Small Volume ASME Electric 3 KW – 36 KW
Standard Features:
(With Optional
Seal Kit)
• System Sentinel™ L.E.D.
diagnostic system
• Immersion thermostat
• Lifeguard stainless steel
elements
• 208, 240, 277 and 480
voltages
• 3 year limited tank
warranty
• Manual reset high limit
control
• Magnetic contactors and
integral fusing
• 3/4" couplings
• 2-1/2" Rigid foam
insulation
MODEL NUMBERS
INPUT
kW
3
6
9
12
15
18
24
27
30
36
IMMERSION THERMOSTATS
Tank Capacity In Gallons
12
20
30
E12A-3-G
E20A-3-G
E30A-3-G
E12A-6-G
E20A-6-G
E30A-6-G
E12A-9-G
E20A-9-G
E30A-9-G
N/A
E20A-12-G E30A-12-G
N/A
E20A-15-G E30A-15-G
N/A
E20A-18-G E30A-18-G
N/A
N/A
E30A-24-G
N/A
N/A
E30A-27-G
N/A
N/A
E30A-30-G
N/A
N/A
E30A-36-G
40
E40A-3-G
E40A-6-G
E40A-9-G
E40A-12-G
E40A-15-G
E40A-18-G
E40A-24-G
E40A-27-G
E40A-30-G
E40A-36-G
• Heavy duty anode rods
• Brass drain valve
• Factory installed
AGA/ASME rated T&P
relief valve
• Certified for a 160 PSI
maximum working
pressure
• All models ASME certified
B
C
8"
3/4"
D
T&P
SYSTEM SENTINEL
A
Options:
• UL Sanitation compliant
ring seal kits available
4 1/4"
In accordance with ANSI test
procedures, these models
tested below the maximum
allowable standby loss levels
of ASHRAE (Part of the
Federally mandated Energy
Policy Act (EPact)). Also
exceeds energy codes of all
states including California
Energy Commission (CEC).
AUTOMATIC
TEMPERATURE
CONTROL
E
2 1/2"
WATER TEMPERATURE RATINGS
Model
Number
E12A
E20A
E30A
E40A
Tank Capacity
Gallons
13
19.9
30
40
Thermostat
Type
Immersion
Immersion
Immersion
Immersion
Minimum
Delivered
Temperature
90°F
90°F
90°F
90°F
Maximum
Delivered
Temperature
190°F
190°F
190°F
190°F
High
Temperature
Limit
200°F
200°F
200°F
200°F
RECOVERY CAPACITIES
Recovery in U.S. Gallons/Hr. (GPH) at Various Temperature Rises
DIMENSIONAL INFORMATION
All dimensions shown in inches
MODEL
NUMBER
A
B
C
D
E
APPROX. SHIPPING
WEIGHT (LBS.)
ASME
E12A
E20A
E30A
E40A
28-1/2
36-1/2
49-1/4
53-3/4
19
19
19
21
24-1/4
24-1/4
24-1/4
26-3/4
14-3/4
14-3/4
14-3/4
16-1/2
26-1/4
26-1/4
32-1/2
32-1/2
135
160
192
228
INPUT EQUIVALENT 40°F
kW
BTU/HR. (22.2°C)
3
10,236
31
6
20,473
62
9
30,709
93
12
40,946
124
15
51,183
155
18
61,420
186
24
81,893
248
27
92,129
279
30
102,366
310
36
122,839
372
60°F
80°F 100°F 120°F 140°F
(33.3°C) (44.4°C) (55.6°C) (66.7°C) (77.8°C)
21
41
62
83
103
124
165
186
207
248
16
31
47
62
78
93
124
140
155
186
12
25
37
50
62
74
99
112
124
149
10
21
31
41
52
62
83
93
103
124
9
18
27
35
44
53
71
80
89
106
All models are North Carolina and Massachusetts Code compliant.
29
30
Eclipse™ 10-Year Electric 12 KW – 24 KW
Standard Features:
EXCLUSIVE 10 YEAR LIMITED TANk WARRANTY!
• 85 and 105 gallon models
• Inputs from 12, 18 and 24 KW
• Staged element operation
• 208, 240, 277 and 480 voltages, single or three phase
• Plastic tank design – no anode rods
• (4) Inconel heating elements
• System Sentinel™ LED diagnostic system
• Full port, full flow, brass drain valve
• UL Sanitation listed
• Less than half the weight of steel construction
• Industry leading stand-by loss efficiencies
D
B
C
A
MODEL NUMBERS
INPUT
kW
12
18
24
SURFACE MOUNTED THERMOSTATS
Tank Capacity In Gallons
85
105
ME85-12-G
ME105-12-G
ME85-18-G
ME105-18-G
ME85-24-G
ME105-24-G
In accordance with ANSI test procedures,
these models tested below the maximum
allowable standby loss levels of ASHRAE
(Part of the Federally mandated Energy
Policy Act (EPact)). Also exceeds energy
codes of all states including California
Energy Commission (CEC).
WATER TEMPERATURE RATINGS
Gallons
Thermostat
Type
Minimum
Delivered
Temperature
Maximum
Delivered
Temperature
85
Surface
90
160°
105
Surface
90
160°
Tank Capacity
RECOVERY CAPACITIES
DIMENSIONAL INFORMATION
Recovery in U.S. Gallons/Hr. (GPH) at Various Temperature Rises
All dimensions shown in inches
MODEL
NUMBER
A
B
C
D
APPROX. SHIPPING
WEIGHT (LBS.)
ASME
85 Gals
105 Gals.
28-1/4
30-1/4
66-1/4
66-1/2
70-1/4
70-3/4
4-1/2
4-1/2
170
185
INPUT
kW
12
18
24
EQUIVALENT
BTU/HR.
40,946
61,418
81,891
40°F
123
184
246
60°F
82
123
164
80°F
61
92
123
100°F
49
74
98
120°F
41
61
82
31
32
Booster Electric 6 KW – 54 KW
Standard Features:
• System Sentinel™
L.E.D. diagnostic system
• Immersion thermostats
• Manual reset high limit
control
• 208, 240, 277 and 480
voltages
• 3 year limited tank
warranty
• Magnetic contactors and
integral fusing
Factory Accessories –
• Solid state low water
cut-off
• Pressure reducing valve
with bypass
• Heavy duty anode rods
• Durable brass drain
valve
• Factory installed
AGA/ASME rated T&P
relief valve
• 6" stainless steel legs
• UL Sanitation compliant
• Certified for a 150 PSI
max working pressure
OPTIONAL THERMOSTATS
(-GS MODELS ONLY)
RECOVERY CAPACITIES
MODEL
INPUT EQUIVALENT
NUMBER
kW
BTU/HR.
E10-6-G
6
20,473
E10-9-G
9
30,709
E10-12-G
12
40,946
E10-15-G
15
51,182
E10-18-G
18
61,418
E10-24-G
24
81,891
E10-27-G
27
92,128
E10-30-G
30
102,364
E10-36-G
36
122,837
E10-45-G
45
153,546
E10-54-G
54
184,256
Approximate Weight – 110 Lbs.
TEMPERATURE RISE – DEGREES F – GPH
40°
60°
80° 100° 120° 140°
62
41
31
25
21
18
92
61
46
37
31
26
123
82
61
49
41
35
154
102
77
61
51
44
184
123
92
74
61
53
246
164
123
98
82
70
276
184
138
111
92
79
307
205
154
123
102
88
369
246
184
147
123
105
461
307
230
184
154
132
553
369
276
221
184
158
THERMOSTAT
3/4" T&P
213/4"
11/4" HOT
OUTLET
NIPPLE
81/4"
11/4" COLD
INLET
NIPPLE
OUTLET
43/4"
17"
TEMPERATURE
LIMIT CONTROL
ELEMENT AND
CLEANOUT
ACCESS PANEL
133/4"
53/4"
INLET
TRANSFORMER
TERMINAL
BLOCK
6"
211/2"
CONTACTORS
FUSE BLOCKS (FUSED MODELS ONLY)
WATER TEMPERATURE RATINGS
Gallon
Capacity
Thermostat
Type
Minimum
Delivered
Temperature
Maximum
Delivered
Temperature
High
Temperature
Limit
10
Immersion
90°F
190°F
200°F
These models meet the energy
efficiency levels of ASHRAE (Part of
the Federally mandated Energy
Policy Act (EPact)). Also exceeds
energy efficiency codes of all states
including California Energy
Commission (CEC). All models are
North Carolina Code compliant.
33
34
Light-Duty Electric 3 KW – 12 KW
Standard Features:
B DIA.
• 208, 240, 277, and 480 voltages
• Porcelain enamel lined tank
• Heavy duty anode rod
• 2-1/2" of rigid foam insulation
• Baked enamel steel jacket
• Patented resistor heating elements
• Surface mounted thermostat
• Manual reset high limit control
• 3 year limited warranty
• Certified for a 150 PSI maximum working pressure
• Factory installed AGA/ASME rated T&P relief valve
• Durable brass drain valve
A
8"
HOT
WATER
CONNECTION
3/4" T&P
COLD
WATER
CONNECTION
ANODE
ROD
WATER CONNECTIONS ALL 3/4" NPT
ELECTRICAL CHARACTERISTICS AND CAPACITIES
ELEMENT
WATTAGE
UPPER/LOWER
RECOVERY CAPACITIES GPH
@ TEMPERATURE RISE OF
40°
60°
80° 100° 120°
FULL LOAD CURRENT (AMPS)
(ALL TERMINALS)
208
240
277
480
3000/3000
31
20
15
12
10
14.4
12.5
10.8
6.3
4000/4000
41
27
20
16
13
19.2
16.7
14.4
8.3
4500/4500
46
31
23
18
15
21.6
18.8
16.2
9.4
5000/5000
51
34
26
20
17
24
20.8
18.1
10.4
6000/6000
61
41
31
25
20
28.8
25
21.7
12.5
ELECTRICAL CHARACTERISTICS AND CAPACITIES
(Simultaneous /Three Phase Operation)
ELEMENT
WATTAGE
UPPER/LOWER
RECOVERY CAPACITIES GPH FULL LOAD CURRENT (AMPS)
@ TEMPERATURE RISE OF
(TERMINAL L3/TERMINALS L1 & L2)
40°
60°
80° 100° 120°
208
240
480
3000/3000
61
41
31
24
20
4000/4000
81
54
41
32
27
33.3/19.2 28.9/16.7 14.4/8.3
4500/4500
91
61
45
37
31
37.5/21.6 32.5/18.8 16.2/9.4
5000/5000
102
68
51
41
34
41.6/24
36.1/20.8 18/10.4
6000/6000
122
81
61
49
41
N/A
43.3/25.0 21.7/12.5
25/14.4
DIMENSIONAL INFORMATION
(All dimensions shown in inches)
(Non-Simultaneous /Single or Three Phase Operation)
21.7/12.5 10.8/6.3
A
B
MODEL
TANk CAPACITY
NUMBER
GALLONS
ELDS30
30
29-1/2
22-1/4
ELDS40
38
31-1/2
23
ELDS52
47
32-1/2
26-1/4
ELD30
30
45-1/2
17-3/4
ELD40
40
46-1/4
22-1/4
ELD52
50
57
22-1/4
ELD66
65
58-3/4
23
ELD80
80
59
24-1/2
ELD120
120
62-1/2
28-1/4
WATER TEMPERATURE RATINGS:
Thermostat Type:
Surface Mounted
Min. Delivered Temperature:
110° F
Max. Delivered Temperature:
170° F
High Temperature Limit:
190° F
APPROX. SHIPPING
WEIGHT (LBS.)
105
135
150
90
108
127
170
200
330
These models have been tested according to DOE test procedures, and exceed the minimum energy
factor requirements of ASHRAE (Part of the Federally mandated Energy Policy Act (EPact)). Also
exceeds energy codes of all states including California Energy Commission (CEC). All models
are North Carolina and Massachusetts Code compliant.
35
36
Point-of-Use Electric 1,440 – 6,000 WATTS
Standard Features:
• 120, 208, 240, 277 and 480 voltages
• Porcelain enamel lined tank
• Heavy duty anode
• Rigid foam insulation
• Baked enamel steel jacket
• Resistor heating element
• Surface mounted thermostat
• Manual reset high limit control
• 3 year limited warranty
• Certified for a 150 PSI maximum working pressure
• Factory installed AGA/ASME rated T&P valve
• Optional wall mounting kit
DIMENSIONAL INFORMATION (All dimensions shown in inches)*
MODEL
EGSP2
EGSP6
EGSP10
EGSP15
EGSP20
EGSP30
MIN
WATTS
1,440
1,500
1,500
1,500
1,500
1,500
A B C D E
MAX
TANk
WATTS GALLONS
1,500
2-1/2
14
9-3/4
—
—
6,000
6
15-1/8 15-3/4 12-5/8 11-5/8
6,000
10
22-7/8 15-3/4 20-3/8 19-3/8
6,000
15
24-1/4 17-3/4 21-7/8 19-3/8
6,000
19.9
25-1/8 19-3/4 22-5/8 19-5/8
6,000
30
30
21-3/4
23
23
—
4-1/4
4-1/4
4-5/8
5-1/8
2-3/4
SHIPPING
WEIGHT (LBS.)
18
41
53
65
76
115
Water Temperature Ratings:
Thermostat Type: Surface
MODELS:
EGSP6
EGSP10
EGSP15
EGSP20
EGSP30
Min. Delivered
Temperature:
110°F
Max. Delivered
Temperature:
170°F
High Temperature
Limit:
190°F
B
B DIA.
3/4" T&P
HOT WATER
CONNECTION
A
C
A
COLD
WATER
INLET
3/4" T&P
D
E
Water Connections 3/4" NPT
MODEL: EGSP2
Water Connections 1/2" NPT
ELEMENT AVAILABILITY
WATTAGE
1,440
1,500
2,000
2,500
3,000
4,500
6,000
31/2"
COLD WATER
CONNECTION
120 V 208 V
**Y
N/A
Y
Y
Y
Y
Y
Y
Y
Y
N/A
Y
N/A
Y
240 V 277 V 480 V
N/A
N/A
N/A
**Y
N/A
N/A
Y
Y
Y
Y
N/A
N/A
Y
Y
Y
*Y
*Y
*Y
Y
Y
Y
*Not available in EGSP6 & EGSP10
**EGSP2 available only in these configurations.
ELECTRICAL CHARACTERISTICS
ELEMENT
WATTAGE
Mounted
Basic model numbers are listed. When ordering specify electrical input to determine specific model number:
Basic Model: EGSP6 Specified Input: 6,000 Watts Specified Model Number: EGSP6-6
Use CEGSP Prefix for Canadian Models.
HOT
WATER
OUTLET
These models meet the minimum energy factor
requirements of ASHRAE (Part of the Federally mandated
Energy Policy Act (EPact)). Also exceeds energy codes of
all states including California Energy Commission (CEC).
All models are North Carolina and Massachusetts
Code compliant.
FULL LOAD CURRENT IN AMPERES
120 V
208 V
240 V
277 V
480 V
1,440
12.0
N/A
N/A
N/A
N/A
1,500
12.5
7.2
6.3
N/A
N/A
2,000
16.7
9.6
8.3
7.2
4.2
2,500
20.8
12.0
10.4
N/A
N/A
3,000
25.0
14.4
12.5
10.8
6.3
4,500
N/A
21.6
18.8
16.2
9.4
6,000
N/A
28.8
25.0
21.7
12.5
All models employ 1 heating element resulting in a 2-wire outlet
(single phase) electrical configuration.
RECOVERY CAPACITIES
ELEMENT
WATTAGE
1,440
1,500
2,000
2,500
3,000
4,500
6,000
TEMPERATURE RISE - DEGREES F GALLONS PER HOUR
40°F 60°F 80°F 100°F 120°F 140°F
15
15
20
25
30
46
61
10
10
14
17
20
30
41
7
8
10
13
15
23
30
6
6
8
10
12
18
24
5
5
7
8
10
15
20
4
4
6
–
9
13
17
37
38
Indirect Water Heaters
Construction Features:
Anode Rod
Hot Outlet,
1-1/2" NPT
• 30, 38, 45, 75 and 110 gallon models
• Heavy gauge steel tank
• High temperature porcelain enamel
protect all tank and coil
• Factory installed automatic temperature
controls
• Factory installed brass drain valve
• Temperature and pressure relief valve
• 1-1/2" coil diameter
• 2" Non-CFC foam insulation
• Two heavy-duty magnesium anode rods
• Factory installed dielectric nipples
Hot Outlet/
Anode Rod,
3/4" NPT
Anode
Rod
Anode Rod
T&P Relief Valve
T&P Relief Valve
From Boiler, 1" NPT
From Boiler,
1" NPT
Aquastat
B
C
B
D
C
Aquastat
To Boiler,
1" NPT
Drain Valve
E
G
D
F
To Boiler,
1"NPT
Drain Valve
E
G
A
UNITS
inches
inches
inches
inches
inches
Cold Inlet, 1" NPT
STID80 & STID120
A
B
C
D
E
F
G
H
APPROX. SHIPPING
WEIGHT
22
22
22
24
28
35-3/4
42-3/4
48-3/4
64-1/8
65-1/4
27-3/4
34-3/4
39-3/4
57-1/8
57-3/4
18-1/2
31-1/2
31-1/2
33
33-3/4
11-3/4
16-3/4
16-3/4
19-1/4
16-1/4
6-1/2
6-1/2
6-1/2
8
8-3/4
4-1/2
4-1/2
4-1/2
5
5
N/A
N/A
N/A
5
6-1/2
180 lbs
226 lbs
231 lbs.
297 lbs.
397 lbs.
FIRST HOUR RATING (gal) @ Coil Output (Btu/hr)
MODEL
NUMBER
STID30
STID40
STID50
STID80
STID120
TANK
FIRST HEAT SOURCE
CAPACITY DRAW FRICTION LOSS*
(FT. W.C.)
(GAL)
(GAL)
30
25
2
38
33
3
45
40
3
75
70
5
110
102
5
180°F,
8 GPM**
180°F,
10 GPM**
115 @ 56,000 117 @ 57,000
173 @ 89,000 183 @ 96,000
180 @ 89,000 190 @ 96,000
233 @ 104,000 245 @ 111,000
265 @ 104,000 277 @ 111,000
A
STID30, STID40
& STID50
F
H
DIMENSIONAL INFORMATION
MODEL
NUMBER
STID30
STID40
STID50
STID80
STID120
Cold Inlet,
3/4" NPT
180°F,
12 GPM**
200°F,
8 GPM**
200°F,
10 GPM**
200°F,
12 GPM**
200°F,
14 GPM**
118 @ 58,000
191 @ 101,000
198 @ 101,000
254 @ 117,000
286 @ 117,000
138 @ 71,000
214 @ 115,000
221 @ 115,000
277 @ 132,000
309 @ 132,000
144 @ 75,000
226 @ 123,000
233 @ 123,000
292 @ 141,000
324 @ 141,000
149 @ 78,000
235 @ 129,000
242 @ 129,000
304 @ 149,000
336 @ 149,000
154 @ 81,000
243 @ 134,000
250 @ 134,000
314 @ 155,000
346 @ 155,000
All data obtained through testing in accordance with GAMA INDIRECT-FIRED WATER HEATERS TESTING STANDARD IWH-TS-1_MARCH 2003
*At 8 GPM **Coil Input (temperature, flow rate). Ratings based on 77°F rise with 58°F inlet potable water.
Note: First Hour Rating =
First Dray + Continuous
Draw
Warning: Installation
should be in accordance
with all national and/or
local codes.
In the absence of local
codes, refer to NFPA 54
or ANSI Z.21.10.1.
Caution: The recommended maximum hot
water temperature setting
for normal residential use
is 120°F. Rheem recommends a tempering
valve or anti-scald valve
be installed and used according to the
manufacturer’s directions
to prevent scalding.
Pressures (all): Test
pressure, 300 psi; working
pressure, 150 psi
Standard Voltage (all):
120V, 60 Hz, 1P
T&P valve installed
39
40
Storage Tanks 80 – 175 GAL.
Standard Features:
• Porcelain enamel lined tank
• Heavy duty anode rods
• ASME construction available
• 2" of rigid foam insulation
• Baked enamel steel jacket
• 5 year limited warranty
These models exceed the minimum efficiency requirements of ASHRAE
(Part of the Federally mandated Energy Policy Act (EPact).
DIMENSIONAL INFORMATION (DIMENSIONS SHOWN IN INCHES)
WATER CONNECTIONS
TOP
FRONT
OUTLET
SIDES
APPROX.
WEIGHT (LBS.)
STANDARD
ASME
1" NPT
T&P OPENING
MODEL
NUMBER
A
B
C
D
ST80(A)
58-5/16
24-3/16
13-3/16
6-3/16
2
2
220 lbs.
260 lbs.
ST100(A)
46
32-1/4
12-9/16
5-9/16
–
2
475 lbs.
475 lbs.
ST120(A)
59-1/4
28-1/4
11-1/16
4-1/16
2
2
300 lbs.
340 lbs.
ST175(A)
67-1/4
32-1/4
12-9/16
5-9/16
2-1/2
2-1/2
600 lbs.
600 lbs.
HOT OUTLET
OPENING
HOT
3/4" NPT
THERMOMETER
OPENING
B
T&P
OPENING
B
3/4" NPT
THERMOMETER
OPENING
TANk INFORMATION
MODEL
NUMBER
ST80(A)
ST100(A)
ST120(A)
ST175(A)
TANk
CAPACITY
(GALLONS)
80
100
115
175
MAXIMUM WORkING
PRESSURE
STD.
ASME
150 PSI
125 PSI
150 PSI
160 PSI
150 PSI
160 PSI
150 PSI
150 PSI
3/4" NPT
AQUASTAT
OPENING
3/4" NPT
AQUASTAT
OPENING
A
39-15/16 A
2” OPENINGS
FOR
CIRCULATING
LINES
CIRCULATING
CONNECTIONS
C
D
D
C
3/4" NPT DRAIN OPENING
ST100(A)
ST80(A), ST120(A), ST175(A)
41
42
Large Volume Storage Tanks 200 – 940 GAL.
1-1/4" NPT T&P
(ST260A AND ABOVE)
Standard Features:
• Available in jacketed and
non-jacketed models
• 200, 260, 320, 430, 500, 750
and 950 gallon capacities
• Porcelain enamel lined tank
• Heavy duty anode rods
• 2" of rigid foam insulation
• Baked enamel steel jacket
• 5 year limited warranty
• All large volume commercial
storage tanks are certified to
ASME heater and pressure
vessel code standards
2" NPT
TANk INFORMATION (Shown in English & Metric)
1" NPT
RELIEF VALVE
OPENING
(ST200A)
B
MODEL
NUMBER
A
3/4" NPT
AQUASTAT
OPENING
D
1" DRAIN
PIPE
MAXIMUM
WORkING
PRESSURE
ASME
TANk CAPACITY
GALLONS
LITERS
ST(U)200A
200
758
150 PSI
ST(U)260A
257
974
125 PSI
ST(U)320A
318
1205
125 PSI
ST(U)430A
432
1637
125 PSI
ST(U)500A
504
1910
125 PSI
ST(U)750A
752
2850
125 PSI
ST(U)950A
940
3563
125 PSI
1034 kPa
C
862 kPa
2"
862 kPa
862 kPa
B
862 kPa
A
3/4"
862 kPa
C
D
862 kPa
4"
DIMENSIONAL INFORMATION FOR VERTICAL
ROUND JACkETED STORAGE TANkS
DIMENSIONAL INFORMATION FOR VERTICAL
BARE (NON-JACkETED) STORAGE TANkS
(All dimensions shown in English and Metric)
MODEL
NUMBER
UNITS
A
ST200A
inches
mm
ST260A
inches
ST320A
ST430A
ST500A
mm
ST750A
inches 107-1/2
ST950A
inches 131-1/2
(All dimensions shown in English and Metric)
WATER CONNECTIONS
TOP
FRONT
OUTLET
SIDE
APPROX.
SHIPPING
WEIGHT
MODEL
NUMBER
UNITS
A
STU200A
inches
mm
STU260A
STU320A
STU430A
STU500A
STU750A
STU950A
mm
B
C
D
77-1/4
32
11-1/2
17-1/4
2
2-1/2
500 lbs.
1962
813
292
438
51
63.5
227 kgs.
95-1/2
34
18
26
2
3
1108 lbs.
mm
2426
864
457
660
51
76
503 kgs.
inches
84-1/2
40
19-3/4
27-1/4
2
3
1290 lbs.
mm
2146
1016
502
692
51
76
586 kgs.
inches
84-1/2
46
21
29
2
3
1626 lbs.
mm
2146
1168
533
737
51
76
738 kgs.
inches
94-1/2
46
21
29
2
3
1765 lbs.
2400
1168
533
737
51
76
801 kgs.
54
22-7/8
30-7/8
2
3
2330 lbs.
mm
mm
2731
3340
1372
581
784
51
76
1058 kgs.
54
22-7/8
30-7/8
2
3
3010 lbs.
1372
581
784
51
76
1367 kgs.
D
WATER CONNECTIONS
TOP
FRONT
OUTLET
SIDE
APPROX.
SHIPPING
WEIGHT
B
C
75-3/4
28
14-5/8
18
2
3
1924
711
371
157
51
76
222 kgs.
inches
88
30
15-3/4
23-3/4
2
3
464 lbs.
mm
2235
762
400
603
51
76
211 kgs.
inches
76
36
17-3/8
25-3/8
2
3
574 lbs.
mm
1930
914
441
645
51
76
261 kgs.
inches
76
42
18-7/8
26-7/8
2
3
816 lbs.
mm
1930
1067
479
683
51
76
370 kgs.
inches
88
42
18-7/8
26-7/8
2
3
925 lbs.
mm
2235
1067
479
683
51
76
420 kgs.
inches
100
48
20-7/8
28-7/8
2
3
1387 lbs.
mm
2540
1219
530
733
51
76
630 kgs.
inches
124
48
20-7/8
28-7/8
2
3
1651 lbs.
3150
1219
530
733
51
76
750 kgs.
488 lbs.
Jacketed models meet or exceed the minimum efficiency requirements of ASHRAE
(Part of the Federally mandated Energy Policy Act (EPact).
43
44
Trouble
Zone
EasytoInstall
Zone
156,000 BTU
199,900 BTU
250,000 BTU
300,000 BTU
360,000 BTU
399,900 BTU
Competitors’ larger units mean a difficult installation. Universal’s heavy duty
gas models are shorter and narrower for easy and convenient installation.
CertiSpec 3.2
What’s new?
32-bit upgrade! What does that mean? Well, nothing you can see or touch,
but this major enhancement is the engine that drives many of the new features.
New Features:
• Internet Upgrades! No more “new” versions
• Internet or mail-in registration (no mandatory registration either!)
• Fuel Cost Calculator
• User defined (imported) business logo/info on job spec document
• Long File Name recognition
• Most recent projects listed under File Menu
• Multiple open projects
• Direct CS3 to CS3 email attachment of project file
NOW INCLuDES SPIDERFIRE MODELS!
Additional Models:
• SPIDERfire sizing
• Small Volume ASME cross reference
• Low NOx sizing
• Large Volume Storage Tank reference
Computer Requirements:
• Windows 95/98 or NT 4.X
• Pentium 90 or higher required
• 16 megabyte RAM (32 recommended)
• Disk Space: 4-6 megabytes (estimated)
• Internet connection required for email and Upgrade Download
• 800 x 600 screen resolution
45
46
A.O. SMITH TO RHEEM-RUUD CONVERSION CHART
A.O. SMITH
Model
Btu/Hr.
RHEEM-RUUD
Gal
Dia.
Height
Model
71
81
81
100
100
81
100
100
65
100
65
85
100
85
27-3/4"
27-3/4"
27-3/4"
27-3/4"
27-3/4"
27-3/4"
30-1/4"
30-1/4"
27-3/4"
30-1/4"
27-3/4"
27-3/4"
30-1/4"
27-3/4"
69-3/4"
73"
67-1/2"
74"
74"
67-1/2"
72"
72"
75"
72"
75"
79-1/2"
75-1/2"
82-1/4"
G75-125
G82-156
G76-180
G100-200
G100-200
G76-200
G100-200(A)
G100-250(A)
G72-250(A)
G100-270(A)
G72-300(A)
G65-360(A)
G100-400(A)
GX90-550(A)
Btu/Hr.
Gal
Dia.
Height
75
82
76
100
100
76
100
100
72
100
72
65
100
90
26-1/4"
26-1/4"
26-1/4"
30-1/4"
30-1/4"
26-1/4"
30-1/4"
30-1/4"
26-1/4"
30-1/4"
26-1/4"
26-1/4"
30-1/4"
30"
65-1/2"
68-13/16"
68-13/16"
73-1/16"
73-1/16"
68-13/16"
73-1/16"
73-1/4"
71-1/16"
73-7/8"
71"
70-11/16"
76"
74-1/2"
75,000
75,000
75
100
26-1/4"
28-1/4"
64-3/8"
69-5/8"
Gas Tank Type Models
BTR-120
BTR-154
BTR-180
BTR-197
BTR-198
BTR-199
BTR-200(A)
BTR-250(A)
BTR-251(A)
BTR-275(A)
BTR-305(A)
BTR-365(A)
BTR-400(A)
BTR-500(A)
120,000
154,000
180,000
199,000
199,000
190,000
199,000
250,000
251,000
275,000
305,000
365,000
399,000
500,000
125,000
156,000
180,000
199,900
199,900
199,900
199,900
250,000
250,000
270,000
300,000
360,000
399,900
550,000
Conservationist/Damper – Gas Tank Type Models
BT-80
75,000
75
25-1/2"
BT-100
75,000
100
26-1/2"
NOTE: (A) denotes ASME construction available.
61-1/8"
68-3/4"
G75-75
G100-80
HE80-130
HE119-160
HE119-199
130,000
160,000
199,000
80
119
119
23-1/2"
27"
27"
72"
73"
73"
GD-100-250(A)
GD-100-270(A)
GD-100-310(A)
GD-100-360(A)
250,000
270,000
310,000
360,000
100
100
100
100
30-1/4"
30-1/4"
30-1/4"
30-1/4"
73-1/2"
73-1/2"
73-1/2"
73-1/2"
GHE100-160
GHE-100-200(A)
GHE-100-250(A)
GHE-100-300(A)
160,000
199,900
250,000
300,000
100
100
100
100
26-1/4"
26-1/4"
26-1/4"
26-1/4"
78-3/4"
78-3/4"
78-3/4"
78-3/4"
Sealed Combustion Gas-Fired
BTH-120
125,000
BTH-150
150,000
BTH-199
199,000
60
100
100
27-3/4"
27-3/4"
27-3/4"
55-1/2"
74-1/2"
74-1/2"
Induced Draft Models
BTI250(A)
250,000
BTI275(A)
275,000
BTI310(A)
310,000
BTI366(A)
366,000
100
100
85
85
27-3/4"
27-3/4"
27-3/4"
27-3/4"
72"
72"
73"
73"
High Efficiency Models
BTH-150
150,000
BTH-199
199,000
BTH-150(A)
240,000
BTH-300(A)
300,000
100
100
100
130
27-3/4"
27-3/4"
27-3/4"
33"
74-1/2"
74-1/2"
74-1/2"
74"
47
48
A.O. SMITH TO RHEEM-RUUD CONVERSION CHART
A.O. SMITH
Model
Btu/Hr.
RHEEM-RUUD
Gal
Model
Btu/Hr.
Gal
Gas – Hot Water Supply Heaters
HW-120
HW-160
HW-200
HW-225
HW-300
HW-399
HW-420
HW-520
HW-670
HW-1240
HW-1340
DW-720
DW-840
120,000
160,000
199,000
225,000
300,000
399,000
420,000
520,000
670,000
1,240,000
1,340,000
720,000
840,000
DW-960
960,000
DW-1080
1,080,000
DW-1210
1,210,000
DW-1350
1,350,000
DW-1480
1,480,000
DW-1610
1,610,000
DW-1810
1,810,000
NOTE: ** Denotes less than 1 gallon storage capacity.
**
**
**
**
**
**
**
**
**
**
**
**
**
GBB/GBBP-136
GBC/GBCP-186
GBC/GBCP-186
GBC/GBCP-264
GBC/GBCP-331
GBC/GBCP-399
GBC/GBCP-399
GX90-550
GX90-640
GBC/GBCP-1223
GBC/GBCP-1337
GBC/GBCP-726
GBC/GBCP-825
136,000
181,000
181,000
264,000
334,000
399,000
399,000
550,000
640,000
1,222,500
1,336,600
726,000
825,000
**
**
**
**
**
**
**
90
90
**
**
**
**
**
**
**
**
**
**
**
GBC/GBCP-962
GBC/GBCP-1125
GBC/GBCP-1223
GBC/GBCP-1337
GBC/GBCP-1467
GBC/GBCP-1630
GBC/GBCP-1826
961,700
1,124,700
1,222,500
1,336,600
1,467,000
1,630,000
1,825,600
**
**
**
**
**
**
**
**
**
**
**
80
115
115
200
Storage Tank Systems (**Unfired Storage Vessels)
TJ-80(A)
**
80
TJV-120M
**
120
TJV-120A
**
120
TJV-200
**
200
NOTE: See large volume storage tanks, page 40 and 41.
ST80(A)
ST120
ST120A
ST200A
49
50
A.O. SMITH TO RHEEM-RUUD CONVERSION CHART
A.O. SMITH
Model
kW
RHEEM-RUUD
Gal
Model
kW
Gal
EGSP6
EGSP10
EGSP15
EGSP20
ELD/ELDS30
ELD/ELDS40
ELD/ELDS52
ELD66
ELD80
ELD120
6 Max
6 Max
6 Max
6 Max
12 Max
12 Max
12 Max
12 Max
12 Max
12 Max
6
10
15
20
30
40
50
65
80
120
Electric – Light Duty and Point-of-Use Products
DEL-6 S
DEL-10 S
DEL-15 S
DEL-20 S
DEN/DEL-30 D
DEN/DEL-40 D
DEN/DEL-52 D
DEN-66 D
DEN-80 D
DEN-120 D
2.5 Max
6 Max
6 Max
6 Max
12 Max
12 Max
12 Max
12 Max
12 Max
12 Max
6
10
15
20
30
40
50
66
80
119
Electric – Heavy Duty Products
DRE/DVE-52
6 to 54
50
ES50/E50
6 to 54
DRE/DVE-80
6 to 54
80
ES85/E85
6 to 54
DRE/DVE-120
6 to 54
119
ES120/E120
6 to 54
DSE-10
3 to 6
10
E12A
3 to 9
DSE-20
3 to 18
20
E20A
3 to 18
DSE-30
3 to 24
30
E30A
3 to 36
DSE-40
3 to 36
40
E40A
3 to 36
DSE-50
6 to 45
50
E50A
6 to 54
DSE-65
6 to 54
65
E85A
6 to 54
DSE-80
6 to 54
80
E85A
6 to 54
DSE-100
6 to 54
100
E120A
6 to 54
DSE-120
6 to 54
120
E120A
6 to 54
NOTE: “DRE”, “DEL”, “DEN” use surface mounted thermostats. “DVE”, “DSE” use immersion thermostats.
NOTE: “ES” models use surface mounted thermostats. “E” models use immersion thermostats.
50
85
120
13
20
30
40
50
85
85
120
120
Electric – Instantaneous/Booster Products
CMC-5
SU-20
6 to 54
6 to 54
5
20
E10
E10
6 to 54
6 to 54
10
10
51
52
AMERICAN TO RHEEM-RUUD CONVERSION CHART
AMERICAN
Model
DCG32 Series
75T125-5N
36S145-6N
75T160-6N
80T180-6N
80T199-6N
98T199-6N
80T250-6N(A)
98T250-6N(A)
75T300-7N(A)
65T370-8N(A)
65T399-8N(A)
80T425-10N(A)
PVDCG32 Series
65T625-8N(A)
80T725-8N(A)
DCG31 Series
73T140-5N
76T180-6N
85S199-6N
100T199-6N
100S199-6N
100S250-6N(A)
100S270-6N(A)
100S300-7N(A)
80L399-8N(A)
80L505-10N(A)
PVCG32 Series
50T63-3NV
75T80-3NV
CG32 Series
75T75-4NV
100T88-4NV
RHEEM-RUUD
Btu/Hr.
Gal
Dia.
Height
Model
125,000
145,000
160,000
180,000
199,999
199,999
250,000
250,000
300,000
370,000
399,999
425,000
75
36
75
80
80
98
80
98
75
65
65
80
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
72"
50-5/8"
72"
71-7/8"
71-7/8"
82-7/8"
71-7/8"
82-7/8"
74-1/2"
73-3/8"
73-3/8"
83"
G75-125
G37-200
G82-156
G76-180
G76-200
G91-200
G72-250(A)
G100-250(A)
G72-300(A)
G65-360(A)
G65-400(A)
GX90-550(A)
625,000
725,000
65
80
28-1/4"
28-1/4"
69-3/8"
79-5/8"
140,000
180,000
199,999
199,999
199,999
250,000
270,000
300,000
399,999
505,000
73
76
85
100
100
100
100
100
75
80
28-1/4"
28-1/4"
30-1/4"
28-1/4"
30-1/4"
30-1/4"
30-1/4"
30-1/4"
30-1/4"
30-1/4"
63,500
80,000
50
75
74,500
88,000
75
100
Btu/Hr.
Gal
Dia.
Height
125,000
199,900
156,000
180,000
199,900
199,900
250,000
250,000
300,000
360,000
399,900
550,000
75
35
82
76
76
91
72
100
72
65
65
90
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
30-1/4"
26-1/4"
26-1/4"
26-1/4"
30"
65-1/2"
49-1/4"
68-13/16"
68-13/16"
68-13/16"
76-5/16"
71-1/16"
73-1/4"
71"
70-11/16"
70-11/16"
74-1/2"
GX90-640(A)
GX90-715(A)
640,000
715,000
90
90
30"
30"
74-1/2"
74-1/2"
74-1/4"
74-1/4"
69"
78"
74-1/2"
74-1/2"
74-1/2"
74-1/2"
71"
69"
G82-156
G76-180
G76-200
G91-200
G100-200
G100-250(A)
G100-270(A)
G100-310(A)
G65-400(A)
GX90-550(A)
156,000
180,000
199,900
199,900
199,900
250,000
270,000
310,000
399,900
550,000
82
76
76
91
100
100
100
100
65
90
26-1/4'
26-1/4"
26-1/4"
26-1/4"
30-1//4"
30-1/4"
30-1/4"
30-1/4"
26-1/4"
30"
68-13/16"
68-13/16"
68-13/16"
76-5/16"
73-1/16"
73-1/4"
73-7/8"
75"
70-11/16"
74-1/2"
22"
26"
70"
70-1/2"
GPV75-75E
GPV75-75E
75,000
75,000
75
75
26-1/4"
26-1/4"
68"
68"
26"
28-1/4"
63-1/2"
68-11/16"
G75-75
G100-75
75,000
75,000
75
100
26-1/4"
26-1/4"
64-3/8"
67-7/8"
53
54
AMERICAN TO RHEEM-RUUD CONVERSION CHART
AMERICAN
Model
kW
RHEEM-RUUD
Gal
Model
kW
Gal
12 Max
12 Max
12 Max
12 Max
12 Max
12 Max
30
40
50
65
80
120
6 to 54
6 to 54
6 to 54
6 to 54
50
85
120
120
**
**
**
**
80
115
115
200
Electric – Light Duty and Point-of-Use Products
LDCE30D
LDCE40D
LDCE50D
LDCE65D
LDCE80D
LDCE119D
12 Max
12 Max
12 Max
12 Max
12 Max
12 Max
30
40
50
65
80
119
ELDS30
ELD40
ELD52
ELD66
ELD80
ELD120
Electric – Heavy Duty Products
ITCE/STCE-33
9 to 54
50
ES50/E50
ITCE/STCE-33
9 to 54
80
ES85/E85
ITCE/STCE-33
9 to 54
119
ES120/E120
AITCE/ASTCE-33
9 to 54
119
E120A
NOTE: “STCE” uses surface mounted thermostats. “ITCE” uses immersion thermostats.
NOTE: “ES” models use surface mounted thermostats. “E” models use immersion thermostats.
Storage Tank Systems (**Unfired Storage Vessels)
CST52-80T
**
80
CST52-120T
**
119
ACST52-120T
**
120
ACST52-200T
**
200
NOTE: See large volume storage tanks, page 40 and 41.
ST80
ST120
ST120A
ST200A
55
56
BRADFORD WHITE TO RHEEM-RUUD CONVERSION CHART
BRADFORD WHITE
Model
RHEEM-RUUD
Btu/Hr.
Gal
Dia.
Height
75T-80
100T-88
D-75T-125-3N
D-38T-155
D-75T-160-3N
D-80T-180-3N
D-80T-199-3N
D-100T-199-3N
D-100S-199-3N
D-80T-250-3N(A)
D-100S-250-3N(A)
D-100T-250-3N(A)
D-100S-270-3N(A)
D-75T-300-3N(A)
D-65T-370-3N(A)
D-65T-399-3N(A)
D-80S-399-3N(A)
D-80T-425-3N(A)
D-80T-505-3N(A)
80,000
88,000
125,000
155,000
160,000
180,000
199,999
199,999
199,999
250,000
250,000
250,000
270,000
300,000
370,000
399,999
399,999
425,000
505,000
75
100
75
38
75
80
80
98
100
80
100
98
100
75
65
65
80
80
80
26"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
30-1/4"
28-1/4"
30-1/4"
28-1/4"
30-1/4"
28-1/4"
28-1/4"
28-1/4"
30-1/4"
28-1/4"
28-1/4"
63-3/4"
68-5/8"
72-1/8"
51"
72-1/8"
71-7/8"
71-7/8"
83"
74-1/4"
71-7/8"
74-1/4"
83"
74-1/4"
74"
74"
74"
77-1/4"
83"
83"
D-80S-512-3N(A)
D-65T-625-3N(A)
D-80T-725-3N(A)
512,000
625,000
725,000
80
65
80
30-1/4
28"
28"
199,999
250,000
270,000
300,000
399,999
450,000
505,000
100
100
100
100
80
80
80
65,000
75,000
199,900
Model
Btu/Hr.
Gal
Dia.
Height
G75-75
G100-75
G75-125
G37-200
G82-156
G76-180
G76-200
G91-200
G100-200
G72-250(A)
G100-250(A)
G100-250(A)
G100-270(A)
G72-300(A)
G65-360(A)
G65-400(A)
G85-400(A)
GX90-550(A)
GX90-550(A)
75,000
75,000
125,000
199,900
156,000
180,000
199,900
199,900
199,990
250,000
250,000
250,000
270,000
300,000
360,000
399,900
399,900
550,000
550,000
75
100
75
35
82
76
76
91
100
72
100
100
100
72
65
65
85
90
90
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
30-1/4"
26-1/4"
30-1/4"
30-1/4"
30-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
30"
30"
64-3/8"
67-7/8"
65-1/2"
49-1/4"
68-13/16"
68-13/16"
68-13/16"
76-5/16"
73-1/16"
71-1/16"
73-1/4"
73-1/4"
73-7/8"
71"
70-11/16"
70-11/16"
78-13/16"
74-1/2"
74-1/2"
75-3/4"
68-7/8"
79-1/8"
GX90-550(A)
GX90-640(A)
GX90-715(A)
550,000
640,000
715,000
90
90
90
30"
30"
30"
74-1/2"
74-1/2"
74-1/2"
30-1/4"
30-1/4"
30-1/4"
30-1/4"
30-1/4"
30-1/4"
30-1/4"
74-3/4"
74-3/4"
74-3/4"
75-1/2"
71"
69"
69"
G100-200
G100-250(A)
G100-270(A)
G100-310(A)
G65-400(A)
GX90-550(A)
GX90-550(A)
199,990
250,000
270,000
310,000
399,900
550,000
550,000
100
100
100
100
65
90
90
30-1/4"
30-1/4"
30-1/4"
30-1/4"
26-1/4"
30"
30"
73-1/16"
73-1/4"
73-7/8"
75"
70-11/16"
74-1/2"
74-1/2"
48
75
100
22"
26"
28-1/4"
66-1/4"
69-1/2"
77"
GPV75-75E
GPV75-75E
GP100-200
75,000
75,000
199,900
75
75
100
26-1/4"
26-1/4"
30-1/4"
68"
68"
81-3/4"
60
60
60
100
100
100
100
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
57"
57"
57"
78"
78"
78"
78"
HE80-130
HE80-160
HE80-199
GHE100-130
GHE100-160
GHE100200(A)
GHE100-250(A)
130,000
160,000
199,000
130,000
160,000
199,900
250,000
80
80
80
100
100
100
100
23-1/2"
23-1/2"
23-1/2"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
72"
72"
72"
78-3/4"
78-3/4"
78-3/4"
78-3/4"
T&S Series
L Series
D-100L-199
D-100L-250(A)
D-100L-270(A)
D-100L-300(A)
D-80L-399(A)
D-80L-450(A)
D-80L-505(A)
TW & PDV Series
TW50T-65-3N
TW75T-75-3N
PDV100S-200-3N
High Efficiency Models
EF60T-125E-3N(A)
EF60T-150E-3N(A)
EF60T-199E-3N(A)
EF100T-150-3N(A)
EF100T-199-3N(A)
EF100T-250-3N(A)
EF100T-300-3N(A)
125,000
150,000
199,999
150,000
199,999
250,000
300,000
57
58
BRADFORD WHITE TO RHEEM-RUUD CONVERSION CHART
BRADFORD WHITE
Model
Btu/Hr.
RHEEM-RUUD
Gal
Model
Btu/Hr.
Gal
136,000
136,000
181,000
181,000
264,000
334,000
399,000
511,500
627,000
726,000
961,700
**
**
**
**
**
**
**
**
**
**
**
1,222,500
1,467,000
1,825,600
2,249,400
2,673,200
2,934,000
**
**
**
**
**
**
Gas – Hot Water Supply Heaters
L-I-T1 Series
90-5N-PF1
135-5N-PF1
180-5N-PF1
225-5N-PF1
270-5N-PF1
315-5N-PF9
360-5N-PF9
495-5N-PF9
645-5N-PF9
745-5N-PF9
985-5N-PF9
90,000
135,000
180,000
225,000
270,000
315,000
360,000
495,000
645,000
745,000
985,000
1255-5N-PF9
1,255,000
1435-5N-PF9
1,435,000
1795-5N-PM9
1,795,000
2065-5N-PM9
2,065,000
2620-5N-PM9
2,620,000
3080-5N-PM9
3,080,000
NOTE: ** Denotes less than 1 gallon storage capacity.
**
**
**
**
**
**
**
**
**
**
**
GBB/GBBP-136
GBB/GBBP-136
GBC/GBCP-186
GBC/GBCP-186
GBC/GBCP-264
GBC/GBCP-331
GBC/GBCP-399
GBC/GBCP-512
GBC/GBCP-627
GBC/GBCP-726
GBC/GBCP-962
**
**
**
**
**
**
GBC/GBCP-1223
GBC/GBCP-1467
GBC/GBCP-1826
(2)-GBC/GBCP-1125
(2)-GBC/GBCP-1337
(2)-GBC/GBCP-1467
Storage Tank Systems (**Unfired Storage Vessels)
M-3-ST80R5
**
80
M-3-ST120R5
**
119
M-3-ST120R5(A)
**
119
M-3-ST200R5(A)
**
200
NOTE: See large volume storage tanks, page 40 and 41.
ST80(A)
ST120(A)
ST120A
ST200A
**
**
**
**
80
115
115
200
59
60
BRADFORD WHITE TO RHEEM-RUUD CONVERSION CHART
BRADFORD WHITE
Model
kW
RHEEM-RUUD
Gal
Model
kW
Gal
12
20
30
40
50
80
119
E12A
E20A
E30A
E40A
ES/E50(A)
ES/E85(A)
ES/E120(A)
3 to 9
3 to 18
3 to 36
3 to 36
6 to 54
6 to 54
6 to 54
12
20
30
40
50
85
120
6 to 54
10
6 Max
6 Max
6 Max
6 Max
12 Max
12 Max
12 Max
6 Max
6 Max
6 Max
6 Max
12 Max
12 Max
12 Max
12 Max
12 Max
6
10
20
30
30
40
50
6
10
20
30
40
50
65
80
120
Electric – Heavy Duty Products
12A-KW-3
20A-KW-3
30A-KW-3
40A-KW-3
M-II-50SF/CF
M-II-80SF/CF
M-II-120SF/CF(A)
3 to 9
3 to 18
3 to 36
3 to 36
6 to 54
6 to 54
6 to 54
NOTE: “SF” uses surface mounted thermostats. “CF” uses immersion thermostats.
NOTE: “ES” models use surface mounted thermostats. “E” models use immersion thermostats.
NOTE: (A) refers to ASME availability. Limited to “E” products.
Typical Rheem-Ruud Configuration: E50-(kW)or ES50-(kW) If kW = 36; Example: E50-36 or ES50-36
Electric – Instantaneous/Booster Products
L-I-6-3CF
6 to 58
Typical Bradford White Configuration: L-I-6-(kW)-3CF
5
E10
Example: L-I-6-36-3CF
Electric – Light Duty and Point-of-Use Products
LD-6U3-1CO15
LD-12U3-1C015
LD-20U3-1C015
LD-30U3-1C015
LD-30L3-3C045
LD-40L3-3CO45
LD-50L3-3C045
LD-WH6U3-1C015
LD-WH12U3-1C015
LD-WH20L3-1C015
LD-WH30L3-1C015
LD-40S3-3C045
LD-50S3-3CO45
LD-65R3-3C045
LD-80R3-3C045
LC-120R3-3C045
1.5 Max
1.5 Max
6 Max
6 Max
12 Max
12 Max
12 Max
1.5 Max
1.5 Max
6 Max
6 Max
12 Max
12 Max
12 Max
12 Max
12 Max
6
12
19
30
30
40
50
6
12
19
30
40
50
65
80
120
EGSP6
EGSP10
EGSP20
EGSP30
ELDS30
ELDS40
ELDS52
EGSP6
EGSP10
EGSP20
EGSP30
ELD40
ELD52
ELD66
ELD80
ELD120
61
62
LOCHINVAR TO RHEEM-RUUD CONVERSION CHART
LOCHINVAR
Model
RHEEM-RUUD
Btu/Hr.
Gal
Dia.
Height
Model
CNR080-075
CNR090-100
CNR145-035-DF9
CNR125-075-DF9
CNR160-075-DF9
CNR180-080-DF9
CNR200-080-DF9
CNR200-100-DF9
CNR199-100-DF9
CNR250-100-DF9
CNR300-075-DF9
CNR370-065-DF9
CNR400-080-DF9
80,000
88,000
145,000
125,000
160,000
180,000
199,999
199,999
199,999
250,000
300,000
370,000
399,999
75
100
35
75
75
80
80
98
100
98
75
65
80
26"
28-1/4"
28-1/4'
28-1/4"
28-1/4"
28-1/4"
28-1/4"
28-1/4"
30-1/4"
28-1/4"
28-1/4"
28-1/4"
30-1/4"
63-3/4"
68-5/8"
50-5/8"
72-1/8"
72-1/8"
71-7/8"
71-7/8"
83"
74-1/4"
83"
74"
74"
77-1/4"
G75-75
G100-75
G37-200
G75-125
G82-156
G76-180
G76-200
G91-200
G100-200
G100-250
G72-300
G65-360
G85-400
CNR500-080-DF9
CNR625-065-DF9
CNR725-080-DF9
505,000
625,000
725,000
80
65
80
28-1/4"
28"
28"
83"
68-7/8"
79-1/8"
GX90-550(A)
GX90-640(A)
(2)-G65-360
250,000
300,000
370,000
399,999
505,000
625,000
725,000
98
75
65
80
80
65
80
28-1/4"
28-1/4"
28-1/4"
30-1/4"
28-1/4"
28"
28"
83"
74"
74"
77-1/4"
83"
68-7/8"
79-1/8"
199,999
100
28-1/4"
77-1/4"
Btu/Hr.
Gal
Dia.
Height
75
100
35
75
82
76
76
91
100
100
72
65
85
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
30-1/4"
30-1/4"
26-1/4"
26-1/4"
26-1/4"
64-3/8"
67-7/8"
49-1/4"
65-1/2"
68-13/16"
68-13/16"
68-13/16"
76-5/16"
73-1/16"
73-1/4"
71"
70-11/16"
78-13/16"
550,000
640,000
720,000
90
90
130
30"
30"
*****
74-1/2"
74-1/2"
70-11/16"
G100-250(A)
G72-300(A)
G65-360(A)
G85-400(A)
GX90-550(A)
GX90-640(A)
GX90-715(A)
250,000
300,000
360,000
399,900
550,000
640,000
715,000
100
72
65
85
90
90
90
30-1/4"
26-1/4"
26-1/4"
26-1/4"
30"
30"
30"
73-1/4"
71"
70-11/16"
78-13/16"
74-1/2"
74-1/2"
74-1/2"
GP100-200
199,900
100
30-1/4"
81-3/4"
CNR Series
75,000
75,000
199,900
125,000
156,000
180,000
199,900
199,900
199,990
250,000
300,000
360,000
399,900
CNA (ASME) Series
CNA251-100-DF9
CNA301-075-DF9
CNA371-065-DF9
CNA401-080-DF9
CNA501-080-DF9
CNA625-065-DF9
CNA725-080-DF9
PNR Series
PNR200-100
63
64
LOCHINVAR TO RHEEM-RUUD CONVERSION CHART
LOCHINVAR
Model
Btu/Hr.
RHEEM-RUUD
Gal
Model
Btu/Hr.
Gal
180,000
199,000
85
85
G76-180
G76-200
180,000
199,900
76
76
90,000
135,000
180,000
199,000
225,000
270,000
315,000
360,000
399,000
500,000
**
**
**
**
**
**
**
**
**
**
GBB/GBBP-136
GBB/GBBP-136
GBC/GBCP-186
GBC/GBCP-186
GBC/GBCP-264
GBC/GBCP-264
GBC/GBCP-331
GBC/GBCP-399
GBC/GBCP-399
GBC/GBCP-512
136,000
136,000
181,000
181,000
264,000
264,000
334,000
399,000
399,000
511,500
**
**
**
**
**
**
**
**
**
**
511,500
627,000
726,000
961,700
1,222,500
1,467,000
1,825,600
2,249,400
2,673,200
2,934,000
**
**
**
**
**
**
**
**
**
**
Gas – Hot Water Supply Heaters
“Copper-Pak” Products
CPN180-85
CPN199-85
“Better Idea” Products
RWN090PM-F1
RWN135PM-F1
RWN180PM-F1
RWN199PM-F1
RWN225PM-F1
RWN270PM-F1
RWN315PM-F9
RWN360PM-F9
RWN399PM-F9
RWN500PM-F9
CWN495PM
495,000
**
GBC/GBCP-512
CWN645PM
645,000
**
GBC/GBCP-627
CWN745PM
745,000
**
GBC/GBCP-726
CWN985PM
985,000
**
GBC/GBCP-962
CWN1255PM
1,255,000
**
GBC/GBCP-1223
CWN1435PM
1,435,000
**
GBC/GBCP-1467
CWN1795PM
1,795,000
**
GBC/GBCP-1826
CWN2065PM
2,065,000
**
(2)-GBC/GBCP-1125
CWN2620PM
2,620,000
**
(2)-GBC/GBCP-1337
CWN3080PM
3,080,000
**
(2)-GBC/GBCP-1467
NOTE: ** Denotes less than 1 gallon storage capacity.
NOTE: “PM” refers to pump mounted models. Also available without pumps.
NOTE: “P” refers to pump mounted Rheem-Ruud models.
Storage Tank Systems (**Unfired Storage Vessels)
RJS080
**
78
RJS085
**
85
RJS120
**
119
RJA120
**
119
RJA200
**
200
NOTE: See large volume storage tanks, page 40 and 41.
ST80
ST80
ST120
ST120A
ST200A
**
**
**
**
**
80
80
115
115
200
65
66
LOCHINVAR TO RHEEM-RUUD CONVERSION CHART
LOCHINVAR
Model
kW
RHEEM-RUUD
Gal
Model
kW
Gal
Electric – Light Duty and Point-of-Use Products
ETX/ETW030KK
12 Max
30
ELD30
12 Max
ESX/ESW030KK
12 Max
30
ELDS30
12 Max
ETX/ETW040KK
12 Max
40
ELD40
12 Max
ESX/ESW040KK
12 Max
40
ELDS40
12 Max
ETX/ETW052KK
12 Max
50
ELD52
12 Max
ESX/ESW050KK
12 Max
50
ELDS52
12 Max
ETX/ETW066KK
12 Max
65
ELD66
12 Max
ETX/ETW082KK
12 Max
80
ELD80
12 Max
ETX/ETW120KK
12 Max
120
ELD120
12 Max
NOTE: “ETX/ESX” refers to 480 volt, 3 phase products. “ETW/ESW” refers to 277 volt, 1 phase products.
NOTE: “ELD/ELDS” models are available in 208, 240, 277 or 480 volt (1 or 3 phase) configurations.
30
30
40
40
50
50
65
80
120
Electric – Heavy Duty Products
HS*(kW)-052
HS*(kW)-082
HS*(kW)-120(A)
HC*(kW)-052
HC*(kW)-082
HC*(kW)-120(A)
9 to 36
9 to 54
9 to 54
9 to 36
9 to 54
9 to 54
52
82
118
52
82
118
ES50
ES85
ES120
E50(A)
E85(A)
E120(A)
6 to 54
6 to 54
6 to 54
6 to 54
6 to 54
6 to 54
50
85
120
50
85
120
E10
6 to 54
10
Electric – Instantaneous/Booster Products
SB*-(kW)
6 to 58
5
Note: * Refers to voltage/phase:
A – 240 Volt, 1 Phase
B – 240 Volt, 3 Phase
J – 208 Volt, 1 Phase
K – 208 Volt, 3 Phase
P – 240 Volt, 1/3 Phase
T – 208 Volt, 1/3 Phase
W – 277 Volt, 1 Phase
X – 480 Volt, 3 Phase
R – Special - Must Specify
67
68
STATE TO RHEEM-RUUD CONVERSION CHART
STATE
RHEEM-RUUD
Model
Btu/Hr.
Gas Water Heaters
Gal
Dia.
Height
Model
Btu/Hr.
Gal
Dia.
Height
SBT75-75NE
SBT100-75NE
SBF75-120NE
SBF75-140NE
SBF30-150NE
SBF80-180NE
SBF30-199NE
SBF80-199NE
SBF100-199NES
SBF100-199NET
SBF30-199NE
SBF30-225NE(A)
SBF75-250NE(A)
SBF100-260NES(A)
SBF100-260NET(A)
75
100
75
75
30
80
30
80
100
100
30
30
75
100
100
26-1/4
28"
24"
24"
28"
28"
28"
28"
30-1/4"
28"
28"
28"
28"
30-1/4"
28"
67-1/2"
72"
76-3/4"
76-3/4"
49"
73-1/2"
49"
73-1/2"
71"
83"
49"
49"
75"
74"
84"
G75-75
G100-75
G75-125
G82-156
G37-200
G76-180
G37-200
G76-200
G100-200
G91-200
G37-200
G37-200
G72-250(A)
G100-270(A)
G100-270(A)
75,000
75,000
125,000
156,000
199,900
180,000
199,900
199,900
199,900
199,900
199,900
199,900
250,000
270,000
270,000
75
100
75
82
35
76
35
76
100
91
35
35
72
100
100
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
30-1/4"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
30-1/4"
30-1/4"
64-3/8"
67-7/8"
65-1/2"
68-13/16"
49-1/4"
68-13/16"
49-1/4"
68-13/16"
73-1/16"
76-5/16"
49-1/4"
49-1/4"
71-1/16"
73-7/8"
73-7/8"
SBF75-300NE(A)
300,000
75
28"
SBF70-360NE(A)
360,000
70
28"
SBF100-400NE(A)
399,900
100
30-1/4"
SBF80-500NE(A)
500,000
80
30-1/4"
SBF80-725NE(A)
725,000
80
30-1/4"
SDV100-199NE
199,900
100
30-1/4"
NOTE: (A) denotes ASME construction available.
75-1/2"
72-3/4"
77"
77-1/2"
75-1/2"
75"
G72-300(A)
G65-360(A)
G100-400(A)
GX90-550(A)
GX90-715(A)
GP100-200
300,000
360,000
399,900
550,000
715,000
199,900
72
65
100
90
90
100
26-1/4"
26-1//4"
30-1/4"
30"
30"
30-1/4"
71"
70-11/16"
76"
74-1/2"
74-1/2"
81-3/4"
75,100
75,100
120,000
140,000
150,000
180,000
199,900
199,900
199,900
199,900
199,900
225,000
250,000
260,000
260,000
Induced Draft Models
SBN250(A)
250,000
SBN275(A)
275,000
SBN310(A)
310,000
SBN366(A)
366,000
100
100
85
85
27-3/4"
27-3/4"
27-3/4"
27-3/4"
72"
72"
73"
73"
GD-100-250(A)
GD-100-270(A)
GD-100-310(A)
GD-100-360(A)
250,000
270,000
310,000
360,000
100
100
100
100
30-1/4"
30-1/4"
30-1/4"
30-1/4"
73-1/2"
73-1/2"
73-1/2"
73-1/2"
High Efficiency Models
SUF-120
125,000
SUF-150
150,000
SUF-199
199,000
SUF-250(A)
240,000
SUF-300(A)
300,000
60
100
100
100
130
27-3/4"
27-3/4"
27-3/4"
27-3/4"
33"
55-1/2"
74-1/2"
74-1/2"
74-1/2"
74"
HE80-130
GHE100-160
GHE100-200(A)
GHE100-250(A)
GHE100-300(A)
130,000
160,000
199,900
250,000
300,000
80
100
100
100
100
23-1/2"
26-1/4"
26-1/4"
26-1/4"
26-1/4"
72"
78-3/4"
78-3/4"
78-3/4"
78-3/4"
69
70
STATE TO RHEEM-RUUD CONVERSION CHART
STATE
Model
kW
RHEEM-RUUD
Gal
Model
kW
Gal
6 Max
6 Max
6 Max
6 Max
6 Max
12 Max
12 Max
12 Max
12 Max
12 Max
12 Max
12 Max
12 Max
6
10
15
20
30
40
50
30
40
50
65
80
120
SB6-10
3 to 9
10
E12A
3 to 9
SB6-20
3 to 18
20
E20A
3 to 18
SB6-30
3 to 36
30
E30A
3 to 36
SB6-40
3 to 36
40
E40A
3 to 36
SB6-52-(kW)**(A)
6 to 81
52
ES50/E50(A)
6 to 54
SB6-82-(kW)**(A)
6 to 81
82
ES85/E85(A)
6 to 54
SB6-120-(kW)**(A)
6 to 81
119
ES120/E120(A)
6 to 54
NOTE: ** Refers to “SFE” which uses surface mounted thermostats. “IFE” uses immersion thermostats.
NOTE: “ES” models use surface mounted thermostats. “E” models use immersion thermostats.
12
20
30
40
50
85
120
Electric – Point-of-Use and Light Duty Products
CPE 6 10MSA
CPE 10 10MSA
CPE 17 10MSA
CPE 20 10MSA
CPE 30 10MSA
CPE 40 20LSA
CPE 50 20LSA
CPE 30 20RTA
CPE 40 20RTA
CPE 52 20RTA
CPE 66 20RTA
CPE 82 20RTA
CPE 120 20RTA
3.8 Max
6 Max
6 Max
6 Max
12 Max
12 Max
12 Max
12 Max
12 Max
12 Max
12 Max
12 Max
12 Max
6
10
17
20
30
40
47
30
40
50
66
82
119
EGSP6
EGSP10
EGSP15
EGSP20
EGSP30
ELDS40
ELDS52
ELD30
ELD40
ELD50
ELD66
ELD80
ELD120
Electric – Heavy Duty Products
Storage Tank Systems (**Unfired Storage Vessels)
PV-82-0ORT(A)
**
82
PV-120-0ORT(A)
**
119
PV-200-0ORTA
**
200
NOTE: See large volume storage tanks, page 40 and 41.
ST80(A)
ST120(A)
ST200A
**
**
**
80
115
200
71