PA821A
PA821A PSM® Antenna Combiner
Guide de l’utilisateur du répartiteur d’antenne PSM®
Bedienungsanleitung für die Antennenweiche PSM®
Guía del usuario del combinador de antenas PSM®
Guida d’uso del combinatore di antenne PSM®
Guia de usuário do combinador da antenas PSM®
Руководство пользователя Combiner антенны PSM®
PSM® アンテナコンバイナ ユーザーガイド
PSM® 天线合并器用户指南
PSM® Antenna Combiner 사용자 설명서
© 2012 Shure Incorporated
Printed in U.S.A.
27A15837 (Rev. 3)
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
READtheseinstructions.
KEEPtheseinstructions.
HEEDallwarnings.
FOLLOWallinstructions.
DONOTusethisapparatusnearwater.
CLEANONLYwithdrycloth.
DONOTblockanyventilationopenings.Installinaccordancewiththemanufacturer’s
instructions.
DONOTinstallnearanyheatsourcessuchasradiators,heatregisters,stoves,orother
apparatus(includingamplifiers)thatproduceheat.
DONOTdefeatthesafetypurposeofthepolarizedorgroundingtypeplug.Apolarized
plughastwobladeswithonewiderthantheother.Agroundingtypeplughastwoblades
andathirdgroundingprong.Thewiderbladeorthethirdprongareprovidedforyour
safety.Iftheprovidedplugdoesnotfitintoyouroutlet,consultanelectricianforreplacementoftheobsoleteoutlet.
PROTECTthepowercordfrombeingwalkedonorpinched,particularlyatplugs,conveniencereceptacles,andthepointwheretheyexitfromtheapparatus.
ONLYUSEattachments/accessoriesspecifiedbythemanufacturer.
USEonlywithacart,stand,tripod,bracket,ortablespecifiedbythemanufacturer,orsoldwiththeapparatus.Whenacartisused,usecautionwhen
movingthecart/apparatuscombinationtoavoidinjuryfromtip-over.
UNPLUGthisapparatusduringlightningstormsorwhenunusedforlong
periodsoftime.
14. REFERallservicingtoqualifiedservicepersonnel.Servicingisrequiredwhentheapparatushasbeendamagedinanyway,suchaspowersupplycordorplugisdamaged,
liquidhasbeenspilledorobjectshavefallenintotheapparatus,theapparatushasbeen
exposedtorainormoisture,doesnotoperatenormally,orhasbeendropped.
15. DONOTexposetheapparatustodrippingandsplashing.DONOTputobjectsfilledwith
liquids,suchasvases,ontheapparatus.
16. TheMAINSplugoranappliancecouplershallremainreadilyoperable.
17. TheairbornenoiseoftheApparatusdoesnotexceed70dB(A).
18. ApparatuswithCLASSIconstructionshallbeconnectedtoaMAINSsocketoutletwitha
protectiveearthingconnection.
19. Toreducetheriskoffireorelectricshock,donotexposethisapparatustorainor
moisture.
20. Donotattempttomodifythisproduct.Doingsocouldresultinpersonalinjuryand/or
productfailure.
Thissymbolindicatesthatdangerousvoltageconstitutingariskof
electricshockispresentwithinthisunit.
Thissymbolindicatesthatthereareimportantoperatingandmaintenanceinstructionsintheliteratureaccompanyingthisunit.
WARNING: ThisproductcontainsachemicalknowntotheStateofCaliforniatocause
cancerandbirthdefectsorotherreproductiveharm.
iii
중요 안전 지침
13.낙뢰시또는장기간동안사용하지않을때는기기의전원을빼놓으십시오.
14.모든서비스는자격을갖춘서비스전문가에게의뢰하십시오.전원코드나플
러그가손상된경우,기기안으로액체를들어가거나물건을떨어뜨린경우,
기기가비나물에젖은경우,기기가정상적으로작동하지않는경우또는기
기를떨어뜨린경우와같이기기가손상되었을때는서비스를받아야합니다.
15.기기에물을떨어뜨리거나뿌리지마십시오.물병과같이물이담긴물체를기
기위에올려놓지마십시오.
16.MAINS플러그나기기용커플러는작동가능한상태로남아있어야합니다.
17.AC어댑터의공기매개잡음은70dB을초과하지않아야합니다.
18.CLASSI구조의기기는MAINS소켓콘센트에보호접지연결방식으로연결
되어야합니다.
19.화재나감전위험을줄이려면이기기를빗물또는습기에노출시키지마십
시오.
20.이제품을고치려고시도하지마십시오.그렇게하면사람이다치거나제품이
고장을일으킬수있습니다.
1.
2.
3.
4.
5.
6.
7.
8.
이지침을정독해주십시오.
이지침을잘보관해주십시오.
모든경고를유의하십시오.
모든지침을준수하십시오.
이기기를물가까이에두고사용하지마십시오.
마른수건으로만닦으십시오.
통풍구를막지마십시오.제조업체의지침에따라설치하십시오.
난방기,방열조절기,스토브,기타열을발산하는기기(앰프포함)근처에설
치하지마십시오.
9. 안전을위해유극또는접지타입의플러그를반드시사용하십시오.유극유형
의플러그에는폭이다른핀이있습니다.접지형플러그에는두개의핀과하
나의접지단자가있습니다.넓은핀이나접지단자는사용자의안전을위한
것입니다.제공된플러그가콘센트에맞지않으면전기기사에게문의하여구
형콘센트를교체하십시오.
10.전원코드는밟히지않도록주의하고특히전원플러그사이,접속소켓및기
기에서나오는부분에전원코드가끼이않도록보호하십시오.
11.제조업체가지정한부속품/부품만사용하십시오.
12.제조업체에서지정하거나기기와함께판매되는카트,스탠드,받
침대,브라켓또는테이블에서만사용하십시오.카트를사용하는
경우,이동시카트와기기가넘어져부상을입지않도록주의하
십시오.
이기호는기기에전기쇼크위험을유발하는위험한전압이
흐른다는것을의미합니다.
이기호는이기기와함께제공된문서에중요한작동및유지
보수지침의내용이들어있다는것을의미합니다.
iv
v
vi
Description
Benefits
Shure antenna combiners actively combine antenna outputs
from up to eight PSM wireless transmitters to a single antenna, improving RF performance and reducing rack clutter.
• Reduction of intermodulation artifacts for cleaner RF
environment and more channels on air
• Simplified antenna placement
Power
• Turn power off before installing.
• Use the supplied power cable to connect the unit to an AC power source.
• The power LED illuminates when powered on.
• Power the unit off when not in use or before disconnecting the unit from the AC power source
Antenna Configuration
Expansion Port
• Attach an antenna to the MAIN OUT of the combiner. For
wideband applications, use the PA805SWB directional
antenna.
• Use the supplied BNC-BNC cables to connect the
ANTENNA INPUTS of the antenna combiner to the antenna
outputs of each transmitter.
An expansion port on the front panel may be used to combine
the main output of the PA821 with the antenna output from another PSM transmitter or combiner.
1.Use the supplied one-foot jumper BNC-BNC cable to connect the MAIN Output to the A IN of the expansion port.
2.Connect the antenna output from a PSM transmitter or another PA421/PA821 to the B IN of the expansion port.
3.Attach the antenna to the A + B OUT of the expansion port.
PA821A
PSM Antenna Combiner
470-952 MHz
A IN
INPUT SIGNAL
A+B OUT
B IN
POWER
INPUT SIGNAL
EXPANSION PORT
MAIN OUT - 50 OHMS
PA821A
PSM Antenna Combiner
470-952 MHz
A IN
INPUT SIGNAL
A+B OUT
B IN
POWER
INPUT SIGNAL
EXPANSION PORT
MAIN OUT - 50 OHMS
50Ω BNC
Pat. 6597301;
Pat. App. Pending
PSM Transmitters
Pat. 6597301;
Pat. App. Pending
PA821A
PSM Antenna Combiner
470-952 MHz
INPUT SIGNAL
A IN
A+B OUT
B IN
POWER
INPUT SIGNAL
MAIN OUT - 50 OHMS
EXPANSION PORT
Pat. 6597301;
Pat. App. Pending
PS124L*
Pat. 6597301;
Pat. App. Pending
Pat. 6597301;
Pat. App. Pending
Pat. 6597301;
Pat. App. Pending
Pat. 6597301;
Pat. App. Pending
PS124L*
Pat. 6597301;
Pat. App. Pending
Eight-to-One Combining for PSM Transmitters
*Optional Accessory - PS124L Power Distribution Cable
FEDERAL COMMUNICATIONS COMMISSION
RF EXPOSURE NOTICE:
Antennas used for the purpose of radiating signals are limited to
a maximum gain of 14 dBi. Each antenna must be positioned to
observe minimum separation requirements from all users and bystanders. The following guidelines should be used when considering separation distances.
Antennas must be placed such that, under normal conditions,
personnel cannot come within 72 cm (~2.5 ft.) from any antenna.
Adhering to this minimum separation will ensure that the employee or bystander cannot exceed RF exposures beyond the
maximum permissible limit as defined by 47 CFR 1.1310, i.e.,
limits for General Population/Uncontrolled Exposure.
7
Specifications- PA821A
Dimensions
Weight
Operating Temperature
Range
Certifications
43 mm x 401 mm x 365 (1.7 in. x
15.8 in. x 14.4 in.), H x W x D
4.8 kg (10.5 lbs),
-18°C (0°F) to 63°C (145°F)
Power Requirements
100 to 240 V AC, 50-60 Hz
Power Consumption
70 W max.
Current Drain
1.5 A (referenced at 100 V AC)
(150VA)
Connector Type
BNC (8)
Impedance
50 Ω
RF Frequency Range
Certified by IC in Canada under RSS-123 and RSS-102.
FCC ID: DD4PA821A. IC: 616A-PA821A.
470–952 MHz
24 dBm
LED Indicator Minimum Detection
threshold
5.5 dBm
0 / -5 dB
Distribution Output
Connector Type
BNC
Impedance
50 Ω
Configuration
Output Intercept Point (OIP3)
Active
>30 dBm, typical
Expansion Port
Connector Type
BNC
Impedance
50 Ω
Configuration
Insertion Loss
Furnished Accessories
<4 dB
95N2035
120 VAC Power Line Cord*
95B8389
230 VAC Power Line Cord*
240 VAC Power Line Cord (U.K.)*
VAC Power Line Cord (Argentina)*
VAC Power Line Cord (Brazil)*
UA802
95C8247
95A8713
95A14335
95A14336
*Model Dependent
Optional Accessories
Wideband Omnidirectional Antenna
(470-952 MHz)
10 ft. Coaxial Cable (RG-8X/U)
25 ft. Coaxial Cable (RG-8X/U)
50 ft. Coaxial Cable (RG-8X/U)
8
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the
device. Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur
de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Note: EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable
types may degrade EMC performance.
LICENSING INFORMATION
Passive
Cable, BNC (11 in. )
(8) 2 ft. Coaxial Cable (RG58C-U)
Meets requirements of the following standards: EN 301 489
Parts 1 and 9, EN60065.
Conforms to electrical safety requirements based on IEC
60065.
Active
Absolute maximum RF input
RF gain
• R&TTE Directive 99/5/EC
• WEEE Directive 2002/96/EC, as amended by 2008/34/EC
• RoHS Directive 2002/95/EC, as amended by 2008/35/EC
Note: Please follow your regional recycling scheme for electronic waste
Certified under FCC Part 74.
RF Input
Configuration
Meets essential requirements of the following European
Directives:
PA805SWB
PA725
UA825
UA850
Licensing: A ministerial license to operate this equipment may
be required in certain areas. Consult your national authority for possible requirements. Changes or modifications not
expressly approved by Shure Incorporated could void your
authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and
licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the
user to contact the appropriate telecommunications authority
concerning proper licensing, and before choosing and ordering frequencies.
The CE Declaration of Conformity can be obtained from Shure
Incorporated or any of its European representatives. For contact information please visit www.shure.com
The CE Declaration of Conformity can be obtained from:
www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: info@shure.de
United States, Canada, Latin
America, Caribbean:
Shure Incorporated
5800 West Touhy Avenue
Niles, IL 60714-4608 USA
Phone: 847-600-2000
Fax: 847-600-1212 (USA)
Fax: 847-600-6446
Email: info@shure.com
www.shure.com
©2011 Shure Incorporated
Europe, Middle East, Africa:
Shure Europe GmbH
Jakob-Dieffenbacher-Str. 12,
75031 Eppingen, Germany
Phone: 49-7262-92490
Fax: 49-7262-9249114
Email: info@shure.de
Asia, Pacific:
Shure Asia Limited
22/F, 625 King’s Road
North Point, Island East
Hong Kong
Phone: 852-2893-4290
Fax: 852-2893-4055
Email: info@shure.com.hk