cc1278_cat07_industrial:industrial 7/11/07 11:46 Page 312 PACEMAKER IP • Attractive die cast aluminium body Pacemaker IP is a new addition to the popular Pacemaker family of high bays. Designed to be both functional and • Robust and sealed gear housing attractive, the body is constructed from die cast • Choice of reflector or prismatic refractor optics aluminium, with a multi-finned heat sink to maximise lampholder heat dissipation for long lamp life. A choice • Variable focus lampholder to select light distribution of aluminium reflector or prismatic refractor optics permit Pacemaker IP to be utilised at all mounting • IP54 and IP65 ingress protection via standard attachments heights, with adjustable beam distribution thanks to a simple variable focus lampholder device. The addition • Easy to install attachments of a glass cover or a choice of polycarbonate or acrylic lenses achieves weatherproof ratings of IP65 and IP54 respectively. Whether it is a decorative retail project or 312 dirty heavy industrial application, Pacemaker IP imparts Industrial & Hazardous Area a high quality solution. WHERE TO USE PACEMAKER IP • • • • • Industrial units Factories Foundries Retail Under canopy areas • • • • Warehouses Distribution centres Exhibition halls Loading bays cc1278_cat07_industrial:industrial 7/11/07 11:46 Page 313 LAMP OPTIONS OPTIONS • 250W, 400W SON-E - E40 cap • 250W, 400W HQI-E - E40 cap • Auxiliary tungsten lamp run-up facility available to special order (reflector versions only) • Open optic versions have an ingress protection rating of IP23 • Refractor fitted with lens attachments have an ingress protection rating of IP54 • Reflector fitted with glass cover attachment has an ingress protection rating of IP65 • Polycarbonate refractor can be used with 250W & 400W lamps • Acrylic refractor to be used with 250W lamps only • Wire guard attachment suitable for fitting to open reflector, reflector with glass cover or refractor • Thermal cut-out on ballast as standard MATERIALS • Body - die cast aluminium • Gear housing - glass reinforced polyester (GRP), self coloured black • Reflector - spun and polished anodised aluminium • Refractor and lens - clear prismatic, UV stabilised acrylic or polycarbonate. Lens has stainless steel clips and safety cord • Glass - toughened clear glass sheet with stainless steel clips and safety cord • Wire guard - heavy gauge galvanised steel INSTALLATION NOTES SPECIFICATION To specify state: Suspended high bay luminaire with multi-finned die cast aluminium body for heat dissipation, sealed GRP gear housing fitted with cable gland and covered terminal block chamber, choice of IP23 spun aluminium reflector or prismatic polycarbonate/acrylic refractor optic and IP65 glass cover or IP54 polycarbonate/acrylic lens attachment, as Crompton Pacemaker IP range, part no. ___________ DIMENSIONS 313 • Suitable for conduit, wire and chain mounting • Body fitted with balancing steel suspension ring and gear housing • 20mm entry with cable gland provided. Facility for additional gland entry • 3 way, 2 x 2.5mm2 terminal block, located in chamber with sealed, screw fixed flap • Reflector and refractor screw fixed via 2 bayonet slots • Glass cover and lenses attached by tri-point clips and safety cord • Supplied excluding lamps PHOTOMETRIC DATA PIP400S/PIPAL/PIPSG Utilisation factors / TM5 Reflectances cd/1000lm 90° H 90° C W F 70 50 20 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 50 57 63 66 71 74 76 79 81 45 52 58 62 68 71 73 77 79 41 48 55 59 65 68 71 75 77 48 55 61 64 69 72 74 76 77 44 51 57 61 66 69 71 74 76 41 48 54 58 63 67 69 72 74 47 54 59 63 67 69 71 73 75 30 43 50 56 60 64 67 69 72 73 10 40 47 53 57 62 65 68 70 72 39 46 51 55 60 63 65 67 69 2 3 2 2 2 2 2 2 2 30 60° 60° 10 200 50 50 20 30 300 10 30 30° Dia Option Dia (mm) With aluminium reflector With polycarbonate/acrylic refractor Lenses add 50mm to depth 515 515 30° LOR: ULOR: DLOR: H (mm) 0.75 0.00 0.75 0 50 0 20 0 BZ-class SHR nom: 1.50 SHR max: 1.67 505 490 Room Index 0.75 See page 422 for Design Guide CATALOGUE NUMBERS Lamp Rating Lamp Type Cat. No. Weight (kg) Description IP Rating Cat. No. Weight (kg) 1.00 Optics Body and gear - order optics and attachment separately 1 x 250W SON-E or HQI-E PIP250S 5.60 Aluminium reflector IP23 PIPAL 1 x 400W SON-E or HQI-E PIP400S 6.90 Polycarbonate refractor IP23 PIPRP 2.10 Acrylic refractor (max 250W) IP23 PIPRA 2.00 Glass cover (for reflector only) IP65 PIPSG 2.15 Polycarbonate lens IP54 PIPSP 0.90 Acrylic lens (max 250W) IP54 PIPSA 0.90 Wire guard IP23 PIPWG 0.35 Attachments PACEMAKER IP Industrial & Hazardous Area Cat. No.