D2 SERIES SPDT SWITCH DC-12.4 GHz N, BNC, TNC The D2 Series features N, BNC or TNC connectors and a frequency range of DC to 12.4 GHz. This series is available with fail-safe, latching self cut-off or pulse latching functions. RF Impedance: Temperature Range: Operating Life: Switching Time: Switching Sequence: Environmental: 50 ohms nominal -35°C to +85°C ambient 1,000,000 cycles min. 15 mSec max. Break Before Make Designed in Accordance to MIL-DTL-3928 (Testing and Operation Modes) SPECIFICATIONS Frequency DC-3 GHz 3-8 GHz 8-12.4 GHz VSWR (max.) Insertion Loss (dB max.) Isolation (dB min.) 1.20 1.35 1.50 0.20 0.35 0.50 80 70 60 Actuator Current (typical) Fail-safe Latching 12Vdc 15 Vdc 24 Vdc 28Vdc 240mA 140mA 240mA 140mA 170mA 130mA 190mA 130mA * If reduced coil current is required, please contact Factory. AVAILABLE OPTIONS OPTION 2 RF CONNECTORS 123- N BNC TNC OPTION 3 TERMINALS 124- Solder Terminals Circular Connector Sub M iniature D-Shell OPTION 4 VOLTAGE 12- 6 Vdc +/- 10% 12 Vdc +/- 10% 3456- 24-30 Vdc 48 Vdc +/- 10% 110 Vac +/- 10% 12-15 Vdc 78- 18-20 Vdc 20-24 Vdc OPTION 5 ACTUATOR OPTION 6 FREQUENCY Fail-safe AM- Standard Diodes BQ- 2- Diodes Diodes, Indicators CY- Standard Diodes KJ- Standard Diodes LLL - TTL (High) TTL (Low) P- High Power Handling OPTION 7 POLARITY Latching Self Cut-Off DE- DC to 12.4 GHz Indicators Diodes, Indicators OPTION 8 SPECIAL OPTIONS 089- Not Applicable Positive Common Negative Common Pulse Latching Connector FL- Indicators Diodes, Indicators Normally Open D2 Option 1 Series HG- - Indicators Diodes, Indicators 2 Option 2 RF Connectors Option 3 Terminals Option 4 Voltage Option 5 Actuator Option 6 Frequency Option 7 Polarity Option 8 Special Options High quality microwave and millimeter wave components and subsystems. Visit Ducommun LaBarge Technologies online at www.ducommun.com. All specifications are subject to change without notice. - 32 -