APRIL 2008
PREFORMED LINE PRODUCTS
The connection you can count on.
COYOTE® RUNT Closure Universal Mounting Kit
CAT. NO. 8003571
Be sure to read and completely understand this procedure before applying product. Be
sure to select the proper PREFORMED product before application.
FIGURE 1 - NOMENCLATURE
1.00 NOMENCLATURE
3.02
1. Mounting Bracket
2. Lock Washer
3. Nut
Using universal keyhole slot, install URM
bracket on pole. (Figure 3)
2.00 DECRIPTION
2.01 The Universal Mounting Bracket (URM) is
designed for use with the COYOTE RUNT
Closure. Its universal capabilities allow for
applications with a 5/8" through-bolt on banding
straps up to 1" (25.4 mm) in width.
3.00 BOLTED APPLICATION:
3.01 Install through-bolt through pole and install nuts
and washers if required per company practices.
Leave enough nut slack to install URM bracket.
(Figure 2)
FIGURE 2 FIGURE 3
3.03
Tighten nut against URM bracket. (Do not
overtighten nut. URM bracket does not require
excess torque). (Figure 4)
FIGURE 4
1
3.04
Completed application of URM bracket only.
(Figure 5)
3.07
Reinstall hardware (Iockwasher and nut) onto
captive bolts of URM bracket. Hand
tighten hardware. (Figure 8)
FIGURE 5
3.05 In preparation for mounting the COYOTE®
RUNT Closure, remove hardware from captive
bolt on URM bracket (nut and lockwasher).
(Figure 6)
FIGURE 8
3.08 FIGURE 9
FIGURE 6 3.06 2
Install COYOTE RUNT Closure onto
URM bracket using mounting hangers at
opposite corners of closure . (Figure 7)
FIGURE 7 Using tools, tighten nut untillockwasher
is flat. (Figure 9)
3.09
Completed application of COYOTE® RUNT
Closure using Universal Runt Mounting Bracket.
(Figure 10)
FIGURE 10
4.00
POLE BAND APPLICATION 4.01
Install pole banding no greater than 1"
(25.4 mm) width through URM bracket.
(Figure 11)
4.04
For banding to Lattice Tower, secure the bracket
with banding material. (Figure 13)
Position the bolted type band on one angle flat
and tighten the nut of the bolted band product.
FIGURE 11
FIGURE 13
4.02
Install pole banding on pole per company practices. (Figure 12) 4.05
Use nuts provided with the URM bracket to
mount the COYOTE RUNT Closure through the
mounting tabs of the closure. (Figure 14)
FIGURE 12
4.03 Install COYOTE® RUNT Closure on URM
bracket per steps 3.05 - 3.08.
FIGURE 14
3