Frame Grabber Selection Guide
Signal Type
Model Name
Standard
Configuration
Connector Interface
Resolution
Interface Bus
Digital
HDV62/HDV62A/PXIe-HDV62A
HDMI
Full HD
GIE62+/GIE64+
Power over Ethernet
Gigabit Ethernet
FIW64 / FIW62
IEEE 1394b
IEEE 1394b
depends on camera
specification
DVI-I
RJ45 x2 / RJ45 x4
1920 x 1080p
depends on camera
specification
MDR26
depends on camera specification
PCIe x 4
PCIe x 4
PCIe x 4
Max. Video Input
1
2/4
PCIe x 4 / PCIe x 1
4/2
Max. Frame Rate
60
depends on camera
specification
depends on camera
specification
depends on camera specification
√ (HDV62)
√ (GIE62+)
√ (FIW64)
√
Area Scan Camera
√
√
√
-
√
Line Scan Camera
Monochrome Camera
√
√
√
Color Camera
Interlaced Scan
√
√
√
√
√
√
√
√
√
√
√
√
√
Progressive Scan
Camera Tap
–
–
-
1-tap, 2-tap, 3-tap, 4-tap
8-bit, 10-bit
depends on camera
depends on camera
specification (FIW64)
8 to 10-bit (FIW62)
8-bit, 10-bit
TTL I/O
Pixel Depth
specification
Max. Clock Frequency
On-board memory
Page No.
Model Name
Standard
Configuration
2
√
√
85 MHz
-
-
512 MB
-
-
128 MB
1-3 / 1-4
1-5 / 1-6
1-7
1-8
Signal Type
Digital
Grablink Base
Grablink DualBase
PoCL (Power over Camera Link)
base
PoCL (Power over Camera Link)
dual base
Grablink Full
Camera Link
base, medium, full
HDR26 x 1
HDR26 x 2
HDR26 x 2
depends on camera specification
depends on camera specification
depends on camera specification
PCIe x1
PCIe x 4
PCIe x 4
1
2
1
depends on camera specification
depends on camera specification
depends on camera specification
TTL I/O
√
√
√
Area Scan Camera
√
√
√
√
√
√
Connector Interface
Resolution
Interface Bus
Max. Video Input
Max. Frame Rate
Line Scan Camera
Monochrome Camera
Color Camera
Interlaced Scan
Progressive Scan
Camera Tap
Pixel Depth
Max. Clock Frequency
On-board memory
Page No.
1-1
CPL64
PoCL (Power over Camera Link)
base, medium
√
√
√
√ (Bayer, RGB)
√ (Bayer, RGB)
√ (Bayer, RGB)
√
√
√
3-tap
8-bit, 10-bit or 12-bit
85 MHz
6-tap
8-bit, 10-bit or 12-bit
85 MHz
8-bit, 10-bit, 12-bit
85 MHz
64 MB
128 MB
128 MB
1-9
1-10
1-11
10-tap
www.adlinktech.com
C121-1-CH1.indd 1
2012/3/6 上午 11:05:04
Signal Type
Analog
1
cRTV24 / cRTV44
Picolo Series
Picolo Alert
Color: PAL/NTSC
Monochrome: CCIR/EIA (RS-170)
-
Color: PAL/NTSC
Monochrome: CCIR/EIA (RS-170)
-
Color: PAL/NTSC
Monochrome: CCIR/EIA (RS-170)
-
Color: PAL/NTSC
Monochrome: CCIR/EIA (RS-170)
-
BNC x 4
BNC x 4
BNC x 4
640 x 480 (NTSC/RS170),
768 x 576 (PAL/CCIR)
640 x 480 (NTSC/RS170),
768 x 576 (PAL/CCIR)
Picolo: BNC, DB9, S-video
Picolo Pro2: BNC x 4
640 x 480 (NTSC/RS170),
768 x 576 (PAL/CCIR)
PCIe-RTV24: PCIe x1
PCI-RTV24: PCI
cRTV24: 3U cPCI
cRTV44: 6U cPCI
4 to 16*
120 fps
TTL I/O
√
Area Scan Camera
Configuration
Connector Interface
Resolution
Interface Bus
640 x 480 (NTSC/RS170),
768 x 576 (PAL/CCIR)
Alert PCI: 64-bit, 66 MHz PCI bus
Alert PCIe: PCI Express x 1
4
32-bit, 33 MHz PCI bus
PCIe x1
Picolo: 1 to 3
Picolo Pro2: 4
120 fps
30 fps
120 fps
√
√
√
√
√
√
√
Line Scan Camera
-
-
-
-
Monochrome Camera
√
√
√
√
Color Camera
√
√
√
√
Interlaced Scan
√
-
√
-
√
-
√
-
Camera Tap
1-tap (PCIe-RTV24)
1-tap (cRTV44)
Pixel Depth
8-bit
8-bit
8-bit
8-bit
Max. Clock Frequency
-
-
-
-
On-board memory
-
-
-
-
1-12
1-13
1-14
1-15
Max. Video Input
Max. Frame Rate
Progressive Scan
3
Vision Platforms
Page No.
4 to 16
* RTV-E4 four channels extension board (optional)
Signal Type
2
Cameras
PCIe-RTV24 / PCI-RTV24
Frame Grabbers
Model Name
Standard
Analog
4
Picolo U4/8/16 H.264
Domino Melody
Domino Harmony
Domino Symphony PCIe
Color: PAL/NTSC
Monochrome: CCIR/EIA
(RS-170)
-
Color: PAL/NTSC
Monochrome: CCIR/EIA
(RS-170)
-
CCIR/RS170,
Non-standard
CCIR/RS170,
Non-standard
CCIR/RS170,
Non-standard
-
-
-
HD44
640 x 480 (NTSC/RS170),
768 x 576 (PAL/CCIR)
HD44
640 x 480 (NTSC/RS170),
768 x 576 (PAL/CCIR)
HD15 x 1
depends on camera
specification
HD15 x 2
depends on camera
specification
HD44 x 1
depends on camera
specification
Max. Video Input
PCI Express x 1
4 to 16
PCI Express x 1
Picolo U4 H.264: 4
Picolo U8 H.264: 8
Picolo U16 H.264: 16
32-bit, 33 MHz PCI bus
1
64-bit, 66 MHz PCI bus
2
PCI Express x 1
4
Max. Frame Rate
480 fps
480 fps
depends on camera
depends on camera
depends on camera
specification
specification
specification
Configuration
Connector Interface
Resolution
Interface Bus
√
√
√
√
√
Area Scan Camera
√ (H.264)
√ (H.264)
√
√
√
Line Scan Camera
-
-
-
-
-
Monochrome Camera
√
√
√
Color Camera
√
√
√
-
Interlaced Scan
√
√
√
√
√ (RGB)
-
-
√
√
√
√
Progressive Scan
Camera Tap
-
-
-
-
-
Pixel Depth
8-bit
8-bit
10-bit
10-bit
10-bit
Max. Clock Frequency
-
-
40 MHz
40 MHz
65 MHz
On-board memory
-
-
16 MB
32 MB
64 MB
1-16
1-17
1-18
1-19
1-20
TTL I/O
Page No.
Image Analysis Tools
Picolo V16 H.264
Model Name
Standard
√
www.adlinktech.com 1-2
C121-1-CH1.indd 2
2012/3/6 上午 11:05:19
HDMI
HDV62
1-CH PCI Express® HDMI Video Capture Card
Introduction
The HDV62 is a PCI Express frame grabber offering uncompressed image acquisition and video streaming in
full 1080p HD.
The ADLINK HDV62 provides 1920x1080p resolution, progressive scan, and noise reduction for greater
image quality. Equipped with a field programmable gate array (FPGA) and 512 MB memory buffer, the
HDV62 offers the ability to stream uncompressed image to the host PC, in addition to color space
conversion in real-time via on-board hardware in order to offload repetitive tasks from the host CPU.
Based on the PCI Express x4 form factor, the HDV62 is specifically designed for medical imaging, scientific
imaging, and military application system integrators by providing uncompressed video streaming up to
1920x1080p at 60 fps and lossless pixel information for both spatial and frequency domain analysis.
Grayscale Camera
Color Camera
Digital
Analog
Features
■ Uncompressed 1920 x 1080p, 60 fps video streams
■ Supports both digital, and component analog video inputs
■ PCI Express® x4 interface
■ Hardware color space conversion
■ 512 MB of DDR2 SDRAM frame buffer
■ Configurable EDID
■ 4 TTL digital inputs/outputs and 1 trigger output
■ Direct SDK support
Applications
■
Medical imaging
■ Scientific imaging
■ HDMI video testing
■ Multimedia device testing
Specifications
■
Form Factor
PCI Express® x4 compliant
■
Video Input
Digital: DVI 1.0, HDMI 1.3 (non-HDCP and non-Audio)
■
Video Input Format
■Windows® Platform
• Windows® Vista/XP/7
• Microsoft® DirectX
■ViewCreatorProTM
• ViewCreatorPro assists developers in evaluating initial
tests and functions.
1080i @ 25 fps, 1080i @ 30 fps
1080p @ 25 fps, 1080p @ 30 fps, 1080p @ 50 fps, 1080p @ 60 fps
■HDV62
1-CH PCI Express® HDMI video capture card
1-3
SD: 720 x 576 @ 25 fps PAL
■
Pixel Output Format
720 x 486 @ 30 fps NTSC
RGB :32-bit RGB
30-bit RGB
24-bit RGB
YUV :24-bit 4:4:4 YCbCr
16-bit 4:2:2 YCbCr
Monochrome: 8-bit Y
■
Frame Buffer
DDR2, 512 MB
■
Digital Input/Output
4 TTL input, 4 TTL output (input with interrupt)
■
Connector
DVI-I: DVI-D and RGB with sync input
DSUB9 Female: YPbPr
■
Temperature: 0 to 55°C
Operating Environment
Ordering Information
HD: 720p @ 50 fps, 720p @ 60 fps
Software Support
Analog: RGB, YPbPr
■
Storage Environment
Humidity: 5% to 90% RHNC
Temperature: 0 to 70°C
Humidity: 0 to 95% RHNC
■
Power Requirements
+12 V max @ 0.5 A, +3.3 V max @ 2 A
■
Dimensions
174.62 mm x 111.15 mm (W x L)
www.adlinktech.com
C121-1-CH1.indd 3
2012/3/6 上午 11:05:20
HDMI
HDV62A/PXIe-HDV62A
1-CH PCI Express®/PXI Express® HDMI Video & Audio Capture Cards
1
The HDV62A/PXIe-HDV62A full high-definition video/audio capture cards are based on the PCI Express®
x4 interface, enabling acquisition of video and digital audio streams from both HD (high-definition) and SD
(standard-definition) video up to 170 MHz DVI input.
ADLINK's HDV62A/PXIe-HDV62A delivers superior quality high-definition video for medical and scientific
imaging and HDMI video/audio test applications. Equipped with a FPGA (field programmable gate array)
and a 512 MB memory buffer, the HDV62A/PXIe-HDV62A provides image streaming of specified target
areas to the host PC, as well as real-time hardware color space conversion to offload repetitive tasks from
the host CPU.
HDV62A
Grayscale Camera
Color Camera
Digital
2
Cameras
PXIe-HDV62A
Frame Grabbers
Introduction
External Bracket (Optional, HDV62A only)
◆ D-SUB9 female for CVBS and S-Video
◆ BNC x3 for YPbPr
Analog
Features
3
Specifications
■Form
Factor
HDV62A: PCI Express® x4 compliant
PXIe-HDV62A: PXI Express® specification Rev. 1.0 compliant
■Video
Input
Digital: DVI 1.0, HDMI 1.3
■Video
Input Format
HD: 720p@50 fps, 720p@60 fps
Analog: RGB, YPbPr, CVBS, S-video
1080i@25 fps, 1080i@30 fps
4
1080p@25 fps, 1080p@30 fps
1080p@50 fps, 1080p@60 fps
Medical imaging
Scientific imaging
■ HDMI video/audio testing
■ Multimedia device testing
SD:
Image Analysis Tools
Applications
720 x 576@25 fps PAL
720 x 486@30 fps NTSC
■
■
■Pixel
Output Format
RGB: 32-bit RGB , 30-bit RGB, 24-bit RGB
YUV: 24-bit 4:4:4 YCbCr
16-bit 4:2:2 YCbCr
Software Support
■Windows® Platform
• Windows® Vista/XP/7
• Microsoft® DirectX
■ ViewCreatorProTM
ViewCreatorPro assists developers in evaluating
initial tests and functions.
Ordering Information
■HDV62A
1-CH HDMI PCI Express® audio/video capture card
■PXIe-HDV62A
1-CH HDMI PXI Express® audio/video capture card
Vision Platforms
■ Uncompressed 1920 x 1080p, 60 fps video stream
■ Support for CVBS, S-video, RGB and component video input
■ Support for HDMI and DVI video input
■ Support for HDMI, S/PDIF audio input
■ PCI Express® x4 interface
■ PXI Express® specification Rev. 1.0 compliant
(PXIe-HDV62A only)
■ Hardware color space conversion
■ 512 MB of DDR2 SDRAM frame buffer
■ Configurable EDID
■ Direct SDK support
Monochrome: 8-bit Y
■
Audio Input
■Frame
Buffer
■Connectors
S/PDIF, HDMI
DDR2, 512 MB
DVI: DVI-D, HDMI & RGB with sync input
External D-SUB9 Female: CVBS, S-Video (HDV62A only)
External BNC: YPbPr (HDV62A only)
Toslink & RCA: S/PDIF
■Operating
Environment
Temperature: 0 to 55°C
Humidity: 5% to 90% RHNC
■Storage
Environment
Temperature: 0 to 70°C
Humidity: 0 to 95% RHNC
■Power
Requirements
■Dimensions
(not including connectors)
+12 V max @ 0.5 A, +3.3 V max @ 2 A
PCIe version: 174.62 x 111.15 mm (W x L)
PXIe version: 174.62 x 111.15 mm (W x L)
■Slot
Requirement
2 peripheral slots (PXIe-HDV62A)
www.adlinktech.com 1-4
C121-1-CH1.indd 4
2012/3/6 上午 11:05:22
Gigabit Ethernet Vision
GIE64+
4-CH PCI Express® Power over Ethernet Frame Grabber
Introduction
ADLINK's GIE64+ is a PCI Express® x4 lane, PoE (Power Over Ethernet) frame grabber which supports
four independent Gigabit Ethernet ports for multiple GigE Vision device connections with data transfer
rates up to 1000 Mb/s, as found with most GigE Vision cameras.
The GIE64+ features not only PoE (power over Ethernet), combining power and signal supply into a single
cable, but also IEEE 1588 (precise time protocol), enabling synchronization with multicamera acquisition.
Applications will greatly benefit through reduce cost, simpler installation and lower maintenance.
PoE Technology
The PoE (Power over Ethernet) technology in the GIE64+ provides automatic detection for stable and
reliable connection between PoE or non-PoE cameras and frame grabbers.
Grayscale Camera
Color Camera
Digital
IEEE
1588
Features
■ PCI Express® x4 compliant
■ Support for four independent Gigabit Ethernet ports
■ Support for IEEE 1588, PTP technology
■ Support for IEEE 802.3af for PoE (Power over Ethernet)
■ Support for jumbo frames (9 KByte)
■ Support for link aggregation
■ Powered Device (PD) auto detection and classification
Applications
■
Machine vision inspection systems
Scientific research instrumentations
■ Medical research instrumentations
■ Intelligent transportation systems
■
Benefits of PoE
• Simplified installation
• Lowered maintenance
• Reduced total cost of ownership
Specifications
■ Form Factor
■ Ethernet Port
■ Operating Environment
■ Power Requirements *
■ Isolated Voltage (optional)
■ Dimensions
PCI Express® x4
Four fully-integrated Gigabit Ethernet Media Access Control (MAC) and physical layer (PHY) ports.
Power over Ethernet, IEEE 802.3af compliant, supporting 0, 1, 2, 3, and 4, and providing up to 15.4 watts
9 kB jumbo frame support
Temperature: 0˚C to +55˚C
Humidity: 5% to 90% RHNC
+3.3 V max @ 1.5 A
2250 VDC
168 mm x 111.15 mm (W x L)
* Additional +12 V max @ 6 A for PoE camera
Software Support
■Windows® Platform
• Available for Windows® XP/7
Ordering Information
■GIE64+
4-CH PCI Express® power over Ethernet frame grabber
1-5
www.adlinktech.com
C121-1-CH1.indd 5
2012/3/6 上午 11:05:23
Gigabit Ethernet Vision
GIE62+
2-CH PCI Express® Power over Ethernet Frame Grabber
1
ADLINK's GIE62+ is a PCI Express® x4 lane, PoE (Power over Ethernet) frame grabber which supports
two independent Gigabit Ethernet ports for multiple GigE Vision device connections with data transfer
rates up to 1000 Mb/s, as found with most GigE Vision cameras. The GIE62+ features a single cable
solution through the combination of power and data lines, simplifying installation, lowering
maintenancing, and reducing total cost of ownership.
PoE Technology
Benefits of PoE
Grayscale Camera
Color Camera
Digital
Features
Applications
■
■ Form Factor
■ Ethernet Port
■ Isolated Voltage
■ Operating Environment
■ Power Requirements *
■ Dimensions
PCI Express® x4
Two fully-integrated Gigabit Ethernet Media Access Control (MAC) and physical layer (PHY) ports.
Power over Ethernet, IEEE 802.3af Compliant, support class 0, 1, 2, 3, and 4, and provides up to 15.4 watts
9 kB jumbo frame support
1000 V @ 60 seconds
Temperature: 0˚C to +55˚C
Humidity: 5% to 90% RHNC
+12 V max @ 0.2 A, +3.3 V max @ 1.5 A
129.5 mm x 111.15 mm (W x L)
4
Image Analysis Tools
Machine vision inspection systems
Scientific research instrumentations
■ Medical research instrumentations
■ Intelligent transportation systems
■
3
Specifications
Vision Platforms
■ PCI Express® x4 compliant
■ Supports two independent Gigabit Ethernet ports
■ Supports PoE (Power over Ethernet), IEEE 802.3af compliant
■ Supports jumbo frames (9 KByte)
■ Supports Link aggregation
■ Powered Device (PD) auto detection and classification
■ Provides industrial screw lock connector
■ 2 digital input/output and 2 trigger output (GIE62+ only)
• Simplified installation
• Lowered maintenance
• Reduced total cost of ownership
2
Cameras
The PoE (Power over Ethernet) technology in the GIE62+ provides automatic detection for stable, and
reliable connection between PoE or non-PoE cameras and frame grabbers.
Frame Grabbers
Introduction
* Additional +12 V max @ 3 A for PoE camera
Software Support
■Windows® Platform
• Available for Windows® XP/Vista/7
Ordering Information
■GIE62+
2-CH PCI Express® power over Ethernet frame grabber with digital I/O and trigger I/O
■PoE
2-CH PCI Express® power over Ethernet frame grabber without digital I/O and trigger I/O
www.adlinktech.com 1-6
C121-1-CH1.indd 6
2012/3/6 上午 11:05:24
IEEE 1394
FIW64 / FIW62
4-CH / 2-CH PCI Express® IEEE 1394b Frame Grabbers
Introduction
The FIW64 / FIW62 are IEEE 1394b (FireWire 800) interface cards designed for high speed computer-based
machine vision applications. The FIW64 / FIW62 support up to four 1394b (FireWire 800) ports for multiple
1394b device connections with data transfer rates up to 3.2 Gb/s, as found with most IEEE 1394b cameras.
The FIW64 / FIW62 provide four/two direct-connect IEEE 1394b connectors with a screw-lock mechanism.
These screw-lock connectors provide a reliable connection between FIW64 / FIW62 and up to four IEEE
1394b cameras.
FIW62
FIW64
PCI
EXPRESS
Grayscale Camera
®
RGB Camera
Digital
Features
■ Industrial screw lock connector
■ Channel status LEDs
■ Power supplied to the IEEE 1394b connectors
A 4-pin ATX power connector on the FIW64 / FIW62 support IEEE 1394b cameras that draw power directly
from the frame grabbers. Each port has a green LED on the front panel that will illuminate when the FIW64 /
FIW62 are connected to a IEEE 1394b camera for convenient identification of channel connection status.
The FIW64 provides four isolated digital inputs and outputs to connect to external devices such a position
sensor. The FIW64 also includes four isolated programmable trigger output pulses to manage trigger events
such as activating a strobe light.
Specifications
FIW64
FIW62
■
Form Factor
■ IEEE 1394b Port
PCI Express® x4 compliant
PCI Express® x1 compliant
Fully support provisions of IEEE P1394b-2002
Fully compliant with provisions of IEEE std 1394-1995 for a high performance serial bus and IEEE std 1394a- 2000
■
Operating Environment
Temperature: 0˚C to +55˚C
Humidity: 5% to 90%
FIW62
■ PCI Express® x1 compliant
■ High-speed image transfer rates up to 800 Mb/s
■
Storage Environment
Temperature: -20˚C to +85˚C
Humidity: 0 to 95% RHNC
■
Power Requirements
Four isolated digital inputs/outputs
Four isolated trigger inputs/outputs
Applications
■
Digital and Trigger I/Os
+3.3 V max @ 0.22 A
+12 V max @ 0.2 A
Power provided to IEEE 1394 connection +3.3 V max @ 2.5 A
+12 V / per port, 1 A
(over current protection)
■
Isolated Voltage
1000 V @ 60 seconds
■
Dimensions
129.5 mm x 111.15 mm (W x L)
FIW64
■ PCI Express® x4 compliant
■ High-speed image transfer rates up to 3.2 Gbps
■ Four isolated digital inputs/outputs
■ Four isolated TTL level programmable trigger output pulses
■
Machine vision inspection systems
Automatic optical inspection machineries
■ Scientific research instrumentations
■ Medical research instrumentations
■
Software Support
-
78.6 mm x 111.15 mm (W x L)
■Windows® Platform
• Available for Windows® XP/Vista/7
Ordering Information
■FIW64
4-CH PCI Express® x4 IEEE 1394b interface card
■FIW62
2-CH PCI Express® x1 IEEE 1394b interface card
Accessories
For more information on cables, please refer to page 2-15
Cabling
■ 1394b Cable
4.5 M IEEE 1394b 9-pin cable with screw-lock connector
1-7
www.adlinktech.com
C121-1-CH1.indd 7
2012/3/6 上午 11:05:25
Camera Link
CPL64
2-CH PCI Express® PoCL Frame Grabber
1
CPL64 is a PoCL (Power over Camera Link®) frame grabber that is based on the PCI Express® x4 interface,
and supports two-channel Camera Link “base” configurations, multi-tap area and line scan cameras.
The CPL64 frame grabber strikes a perfect balance between performance and cost. It is capable of
simultaneously image acquisition from two completely independent Camera Link base configuration
Frame Grabbers
Overview
cameras, and supports image transfer rates up to 512 MB/s.
PoCL Technology
Benefits of PoCL
CAMERA
Grayscale Camera
RGB Camera
Camera Link
Digital
• Easy installation
• Reduce wiring (Single cable for digital I/F, and power)
• Reduce camera size
Features
Applications
■
Software Support
■Windows® Platform
• Available for Windows® XP/Vista/7 (32/64-bit)
■CamCreatorTM
• CamCreator assists developers in quickly evaluating
initial tests and functions.
Ordering Information
■CPL64
2-CH PCI Express® x4 PoCL frame grabber
Accessories
■ Form Factor
■ Video Input
■ Camera Control
■ External Signal Input
■ Power over Camera Link® (PoCL)
PCI Express® x4 compliant
Camera Link® LVDS deferential signals
Dual Base Configuration: Using two MDR26 pins connectors
Maximum camera link data rate: 85 MHz
Supports PoCL and standard Camera Link interface and auto detect
LVDS camera control: CC1 to CC4 control signal in two MDR26 pins connectors
External RS422 level ABZ phase deferential signal for encoder input
2 channels TTL level Line /Area trigger input
2 channels TTL level Line trigger start input
2 channels TTL level exposure output
Line trigger bypass output (encoder mode only)
4 channels digital input; 4 channels digital output
Power line output per channel : DC +12 V max @ 1 A
Over-current Protection function, auto detect when
non-PoCL cable or PoCL camera connected.
■
Temperature: 0˚C to +50˚C
Humidity: 5% to 90% RHNC
Temperature: 0˚C to +70˚C
Humidity: 0 to 95% RHNC
+12 V max @ 0.5 A
+3.3 V max @ 1.6 A
167.65 mm x 111.15 mm (W x L)
Operating Environment
■ Storage Environment
■ Power Requirements
■ Dimensions
4
Image Analysis Tools
PCB/FPD/Wafer/Solar Cell surface inspections
■ Medical research instrumentations
3
Specifications
Vision Platforms
■ PCI Express® x4 compliant
■ Supports 2-CH Camera Link® Base configuration
■ Acquisition pixel clock rates up to 85 MHz
■ PoCL (Power over Camera Link®) safe power compliant
with auto detection
■ 128 MB of 200 MHz DDR SDRAM for acquisition
■ 4 TTL Digital Input/Output, and 2 trigger Input
■ Supports 64-bit memory addressing
■ Two serial communication ports
2
Cameras
The PoCL (Power over Camera Link®) standard allows the camera link cable to supply power to the camera through the Camera Link connector without losing backward compatibility with the previous Camera Link®
standard, this solution is particularly suitable for a small camera.
For more information on cables, please refer to page 2-15
Cabling
■ PoCL Cable
5 M, power over Camera Link cable
■ Camera Link Cable
5 M, robot type
www.adlinktech.com 1-8
C121-1-CH1.indd 8
2012/3/6 上午 11:05:28
Grablink Base
Cost-effective Single Channel PoCL Frame Grabber
Introduction
The Grablink Base is a cost-effective full-featured frame grabber for one Camera Link® camera applications. It
supports one Camera Link® Base configuration camera as well as featuring on-board processing and one rich
set of I/O lines. The Grablink Base features a 1-lane PCI Express® bus.
Flexible and Reliable Area-scan Acquisition Modes
◆ Trigger
When the part is in front of the camera, a trigger is generated and sent to the Grablink to start the acquisition. This external signal is generated by any type of external hardware device, such as a sensor, which is connected to one of the input lines of the Grablink boards. A "software" trigger signal may also be generated by the host application.
• Trigger delay: In order to accommodate different positions of the sensor, an optional programmable trigger delay may postpone the start of the acquisition for a given number microseconds.
CAMERA
Grayscale Camera
RGB Camera
Camera Link
Digital
Features
■ Base Camera Link® configuration cameras
■ On-board processing
- LUTs operators, Bayer CFA decoder, pixel formatting,
and image reconstruction
■ 64 MB on-board memory
■ PCI Express x1
■ MultiCam drivers for Microsoft Windows® and Linux
(32- and 64-bit)
Applications
■
■
■
■
■
■
Quality control
Semiconductor inspection
PCB inspection
FPD inspection
On-the-fly image acquisition
High frame rate image acquisition
Software Support
• Available for Windows® 7 SP1/Vista SP2 (32-bit/64-bit)
• Available for Windows® XP SP2 (64-bit)/SP3 (32-bit)
• Available for Windows® server 2008 SP2 (32-bit/64-bit)
• Available for Windows® server 2008 R2 SP1 (64-bit)
• Available for Red Hat Enterprise Linux 5.2
(Kernel 2.6.18-92) (32-bit/64-bit)
• Trigger decimation: In order to decrease the acquisition speed, the Grablink may be instructed to skip, at a regular defined rate, some of the pulses sent by the external trigger.
High-Performance Line-scan Acquisition Modes
(Please refer to page 1-10 for details.)
◆
• Continuous web scanning
• Successive object scanning
The Grablink acquisition boards feature several acquisition modes dedicated to line-scan cameras:
◆
Trigger:
• Grablink supports start and end trigger
• Trigger delay
Quadrature Motion Encoder Supports
Quadrature motion encoders use two signals (or phases), called A and B, that the Grablink board can interpret
to know in which direction (forward or backward) the part is moving.
◆ With the optional direction selector, the user can define which direction is considered as the forward direction for the application, A to B or B to A. Optionally, the Grablink can be instructed to acquire lines only when the object is moving forward, or only when the object is moving backward.
◆ With the backward motion cancellation, the Grablink is capable of stopping the acquisition when a backward motion is detected. The line acquisition automatically resumes when the motion is again in the forward direction at the exact place where the acquisition was interrupted.
Ordering Information
■Grablink Base
Cost-effective single-channel PoCL frame grabber
Accessories
For more information on cables, please refer to page 2-15
Cabling
Quadrature Decoder Block Diagram
■ PoCL Cable
5 M, Power over Camera Link cable
■ Camera Link Cable
5 M, robot type
1-9
www.adlinktech.com
C121-1-CH1.indd 9
2012/3/6 上午 11:05:29
Camera Link
Grablink DualBase
2-CH PCI Express® PoCL Frame Grabber
1
The Grablink DualBase is a cost-effective full-featured frame grabber for two Camera Link cameras
applications. It supports two Camera Link Base-configuration cameras as well as featuring on-board processing
and two rich sets of I/O lines.
Frame Grabbers
Introduction
Flexible and Reliable Area-scan Acquisition Modes
• Trigger delay: In order to accommodate different positions of the sensor, an optional programmable trigger delay may postpone the start of the acquisition for a given number microseconds.
CAMERA
Grayscale Camera
RGB Camera
Camera Link
Digital
Features
Applications
■
■
■
■
■
Software Support
• Available for Windows® 7 SP1/Vista SP2 (32-bit/64-bit)
• Available for Windows® XP SP2 (64-bit)/SP3 (32-bit)
• Available for Windows® server 2008 SP2 (32-bit/64-bit)
• Available for Windows® server 2008 R2 SP1 (64-bit)
• Available for Red Hat Enterprise Linux 5.2
(Kernel 2.6.18-92) (32-bit/64-bit)
High-Performance Line-scan Acquisition Modes
◆ The Grablink acquisition boards feature several acquisition modes dedicated to line-scan cameras:
• Continuous web scanning to inspect infinite, continuously moving surfaces without losing a single line.
• Successive object scanning to acquire the image of objects moving in front of the camera. The acquisition starts when each object enters the camera field of view, as signaled by an external trigger.
◆
Trigger
Typically, a trigger is used to start the acquisition of lines when the part to be inspected is in position. This external signal is generated by any type of external hardware device, such as a sensor, which is connected to one of the input lines of the Grablink boards. A "software" trigger signal may also be generated by the host application.
• Grablink supports start and end triggers. After it is started, the acquisition either
√ Continues indefinitely (for web inspection applications)
√ Continues for a programmable number of lines (to acquire the image of objects with a known length)
√ Continues until an end trigger is received (to acquire the image of objects with a variable length)
• Trigger delay: In order to accommodate different positions of the sensor, an optional programmable trigger delay is able to delay the start of the acquisition of a given number of lines.
Quadrature Motion Encoder Supports
(Please refer to page 1-9 for details.)
Quadrature motion encoders use two signals (or phases) that the Grablink series can interpret to know in
which direction (forward or backward) the part is moving.
• Optional direction selector
• Backward motion cancellation
3
4
Image Analysis Tools
■
Quality control
Semiconductor inspection
PCB inspection
FPD inspection
On-the-fly image acquisition
High frame rate image acquisition
• Trigger decimation: In order to decrease the acquisition speed, the Grablink may be instructed to skip, at a regular defined rate, some of the pulses sent by the external trigger.
Vision Platforms
■ Two Base Camera Link® configuration cameras
■ On-board processing
- LUTs operators, Bayer CFA decoder, pixel formatting,
and image reconstruction
■ 128 MB on-board memory
■ PCI Express® x4 full-height, half-length
2
Cameras
◆ Trigger
When the part is in front of the camera, a trigger is generated and sent to the Grablink to start the acquisition. This external signal is generated by any type of external hardware device, such as a sensor, which is connected to one of the input lines of the Grablink boards. A "software" trigger signal may also be generated by the host application.
Ordering Information
■Grablink DualBase
2-CH PCI Express® PoCL frame grabber
Accessories
For more information on cables, please refer to page 2-15
Cabling
■ PoCL Cable
5 M, Power over Camera Link cable
■ Camera Link Cable
5 M, robot type
www.adlinktech.com 1-10
C121-1-CH1.indd 10
2012/3/6 上午 11:05:31
Camera Link
Grablink Full
Cost-effective Single-Channel Full Camera Link® Frame Grabber
Introduction
The Grablink Full is a cost-effective, full-featured frame grabber for single Camera Link camera applications.
It supports one Base-, Medium- or Full-configuration camera, including 10-tap cameras. The Grablink Full
features a 4-lane PCI Express bus. This high-end acquisition board is ideal for high-speed and high-resolution
area-scan and line-scan applications such as printing, web, and flat panel display inspection, 3D inspection and
manufacturing inspection for fast production lines.
Flexible and Reliable Area-scan Acquisition Modes
(Please refer to page 1-9 for details.)
◆
PCI
EXPRESS
Grayscale Camera
High-Performance Line-scan Acquisition Modes
CAMERA
®
RGB Camera
Camera Link
Digital
Features
■ Supports Base, Medium, and Full Camera Link®
configuration cameras
■ 10-tap configuration cameras
■ On-board processing
- LUTs operators, Bayer CFA decoder, pixel formatting,
and image reconstruction
■ 128 MB on-board memory
■ PCI Express® x4 full-height, half-length
■ MultiCam drivers for Microsoft Windows® and Linux
(32- and 64-bit)
Applications
■
■
■
■
■
■
Trigger
• Trigger delay
• Trigger decimation
Quality control
Semiconductor inspection
PCB inspections
FPD inspections
On-the-fly image acquisition
High frame rate image acquisition
(Please refer to page 1-10 for details.)
◆
• Continuous web scanning
• Successive object scanning
The Grablink acquisition boards feature several acquisition modes dedicated to line-scan cameras:
◆
Trigger:
• Grablink supports start and end trigger
• Trigger delay
Quadrature Motion Encoder Supports
Quadrature motion encoders use two signals (or phases), called A and B, that the Grablink board can interpret
to know which direction (forward or backward) the part is moving.
◆ With the optional direction selector, the user can define which direction is considered as the forward direction for the application, A to B or B to A. Optionally, the Grablink can be instructed to acquire lines only when the object is moving forward, or only when the object is moving backward.
◆ With the backward motion cancellation, the Grablink is capable of stopping the acquisition when a backward motion is detected. The line acquisition automatically resumes when the motion is again in the forward direction at the exact place where the acquisition was interrupted.
Software Support
■Windows® Platforms
• Available for Windows® 7 SP1/Vista SP2 (32-bit/64-bit)
• Available for Windows® XP SP2 (64-bit)/SP3 (32-bit)
• Available for Windows® server 2008 SP2 (32-bit/64-bit)
• Available for Windows® server 2008 R2 SP1 (64-bit)
• Available for Red Hat Enterprise Linux 5.2
(Kernel 2.6.18-92) (32-bit/64-bit)
Ordering Information
Quadrature Decoder Block Diagram
■Grablink Full
Cost-effective single-channel full Camera Link® frame grabber
Accessories
For more information on cables, please refer to page 2-15
Cabling
■ Camera Link Cable
5 M, robot type
1-11 www.adlinktech.com
C121-1-CH1.indd 11
2012/3/6 上午 11:05:32
Analog
PCIe-RTV24 / PCI-RTV24
4-CH PCI Express® / PCI Real-time Video Capture Cards for Standard Cameras
1
General
The PCIe-RTV24/PCI-RTV24 acquisition board are designed without compromise for machine vision and
video surveillance applications. They are the ideal devices for PC-based multiple-channel vision application.
®
PCIe-RTV24
The PCIe-RTV24 PCI Express x1 lane frame grabber can capture simultaneously four analog video streams in
real time. It accepts standard composite colors (PAL, NTSC) or monochrome video formats (CCIR, EIA).
PCI-RTV24
EXPRESS
Color Camera
®
Analog
Features
Applications
■
■
■
■
■
■
PC-based surveillance systems
Digital Video Recorder (DVR)
Factory monitoring systems
Machine vision inspection systems
Scientific research instrumentations
Medical research instrumentations
■Windows® Platform
• Available for Windows® XP/Vista/7
• Available for Microsoft® DirectX
• Recommended programming environments: C#/.NET/
VC++/VB/C++ Builder/Delphi
• Sample programs included
■LabVIEW® VIs
Angelo-LVIEW
■ Linux Platform
Fedora core 3, Kernel 2.6.22
■ViewCreatorPro™
ViewCreatorPro assists developers in evaluating initial tests
and functions.
Ordering Information
Image Acquisition
◆ Frame Rate: 30 full-frame images acquired per second for each channel.
◆ Color Image: Color video format is compatible with the following composite video input formats:
NTSC-M, NTSC-Japan, PCL-B, PALD, PAL-G, PAL-H, PAL-I, PAM-M, PAL-N and SECAM
◆ Monochrome Image: The monochrome video acquisition is compatible with CCIR and EIA (RS-170).
◆ Optional Scaling: The acquire images or portions of images can be optionally scaled:
• Acquisition of a programmable area of interest
• Scaling of the image (down to 1:16)
• Adjustment of hue (for NTSC signals), contrast (0 to 200%), brightness and saturation (0 to 200% for U and V signals)
• Automatic chrominance gain control
RTV-E4 Extension Board (Optional)
◆ Expandable up to 16 channels
◆ 10-pin ribbon cable to onboard 10-pin header connector for channel extension.
Each header adds 4 video input channels.
◆ Three 10-pin header connectors onboard.
I/O Lines
The PCIe-RTV24/PCI-RTV24 is fitted with TTL compatible I/O lines, supporting 4 inputs, 4 outputs and 4 soft
trigger lines with protection against overloads and electrostatic discharges.
Every line maybe configured as an input or output or can be used to trigger an acquisition or report an alarm
condition.
RTV-I4 Isolated GPIO Board (Optional)
◆ General Purpose I/O Lines :
• All I/Os are TTL compatible and support 4 inputs, 4 outputs, and 4 soft trigger lines.
• Two on-board 10-pin header connectors.
• The I/O lines are pulled high internally and have the following characteristics:
Voltage
Min.
Max.
Input High Voltage (20 μA)
2.0 V
5.25 V
Input Low Voltage (-0.2 μA)
0.0 V
0.80 V
Output High Voltage (-1.0 mA)
5.0 V
--
Output Low Voltage (100 mA)
--
0.50 V
3
4
Image Analysis Tools
Software Support
System integrators also benefit from a watchdog for fault-tolerant applications and easy-to-use standard
connectors.
Vision Platforms
■ PCI Express® x1 compliant (PCIe-RTV24) , up to 120 fps
■ Four color video digitizers operating in parallel
■ Color (PAL / NTSC), monochrome (CCIR / EIA) camera supported
■ Up to 16 channels extension
■ On-board TTL I/O lines
■ Built-in watchdog timer
■ User-friendly ViewCreator utility
■ Software trigger supported
Arbitrary cropping to regions of interest is possible. The PCIe-RTV24 generates bitmaps in all popular color
formats such as RGB, YUV, planar, or packed.
2
Cameras
PCI
Grayscale Camera
The supported resolution is programmable and includes square-pixel (640 x 480 or 768 x 576) and broadcast
resolution. Before captured images are transferred to the PC's memory, images can be scaled down using available
selectable ratios.
Frame Grabbers
Introduction
Watchdog
A hardware watchdog is available on the PCIe-RTV24/PCI-RTV24. The watchdog is able to monitor the
PC's application operation and will automatically reset the PC after a programmable inactivity time-out. This
ensures a reliable operation of remote systems.
■PCIe-RTV24
PCI Express® 4-CH real-time video capture card for standard cameras
■PCI-RTV24
PCI 4-CH real-time video capture card for standard cameras
www.adlinktech.com 1-12
C121-1-CH1.indd 12
2012/3/6 上午 11:05:35
cRTV-24 / cRTV-44
3U/6U CompactPCI 4-CH Real-time Video Capture Boards
Introduction
General
The cRTV series is a CompactPCI acquisition board is designed without compromise for security and video
surveillance applications. It's the ideal device for PC based multiple-channel digital video recording.
This 64-bit, 66 MHz CompactPCI (including 32-bit and 33 MHz) frame grabber can capture simultaneously
four analog video streams in real time. It accepts standard composite colors (PAL, NTSC) or monochrome
video formats (CCIR, EIA).
cRTV-24
cRTV-44
Grayscale Camera
Color Camera
Analog
The supported resolution is programmable and includes square-pixel (640 x 480 or 768 x 576) and broadcast
resolution. Before captured images are transferred to the PC's memory, images can be scaled down using
available selectable ratios.
Arbitrary cropping to regions of interest are possible. The RTV series generates bitmaps in all popular color
formats such as RGB, YUV, planar or packed. System integrators also benefit from a watchdog for fault-tolerant
applications and easy-to-use standard connectors.
Image Acquisition
Features
■ Four color video digitizers operating in parallel
■ Up to 120 fps in 64-bit, 66 MHz CompactPCI bus
■ Color PAL/NTSC, monochrome CCIR/EIA camera support
■ On-board TTL I/O lines
■ User-friendly ViewCreator utility
■ Channel status report LEDs
Applications
■
■
■
■
■
■
PC-based surveillance systems
Digital Video Recorder (DVR)
Factory monitoring systems
Machine vision inspection systems
Scientific research instrumentation
Medical research instrumentation
Frame Rate: 30 full-frame images acquired per second for each channel.
Color Image: Color video format is compatible with the following composite video input formats:
NTSC-M, NTSC-Japan, PCL-B, PALD, PAL-G, PAL-H, PAL-I, PAM-M, PAL-N and SECAM
◆ Monochrome Image: The monochrome video acquisition is compatible with CCIR and EIA (RS-170).
◆ Optional Scaling: The acquired images or portions of images can be optionally scaled:
• Acquisition of a programmable area of interest
• Scaling of the image (down to 1:16)
• Adjustment of hue (for NTSC signals), contrast (0 to 200%), brightness and saturation (0 to 200% for U and V signals)
• Automatic chrominance gain control
◆
◆
Channel Status LED
The cRTV series provide channel status is monitored by four dedicated LEDs.
I/O Lines (cRTV-44)
The cRTV-44 is fitted with TTL compatible I/O Lines, supporting 4 inputs, 4 outputs lines with protection
against overloads and electrostatic discharges.
Software Support
■Windows® Platform
• Available for Windows® XP/Vista/7
• Available for Microsoft® DirectX®
• Recommended programming environments: C#/.NET/
VC++/VB/C++ Builder/Delphi
• Sample programs included
■LabVIEW® VIs
Angelo-LVIEW
■ Linux Platform
Fedora core 3, Kernel 2.6.22
■ ViewCreatorPro™
ViewCreatorPro assists developers in quickly evaluating initial tests and functions.
Ordering Information
■cRTV-44
6U CompactPCI 4-CH real-time video capture board
■cRTV-24
3U CompactPCI 4-CH real-time video capture board
1-13 www.adlinktech.com
C121-1-CH1.indd 13
2012/3/6 上午 11:05:36
Analog
Picolo Series
Color/Monochrome Frame Grabbers for Standard Cameras
1
General
◆ Picolo/Picolo PCIe: The Picolo/Picolo PCIe are low-cost frame grabber cards ideal for single camera
applications. They provide a robust BNC connector, an S-video connector and a DB-9 connector for video
input and I/O connections.
◆ Picolo Pro 2/Picolo Pro 2 PCIe: The Picolo Pro 2/Picolo Pro 2 PCIe are cost-effective frame grabber
cards optimized for video surveillance applications. The synchronization stage, PCI management hardware
and the MultiCam driver have been optimized to allow high-speed acquisition of full-resolution images from
multiple unsynchronized cameras.The Picolo Pro 2/Picolo Pro 2 PCIe provide 4 BNC connectors (video
input) allowing connection of up to four cameras.
Picolo
Grayscale Camera
Color Camera
Analog
Features
Picolo Pro 2/Picolo Pro 2 PCIe
■ Connection of up to 4 cameras
■ High frame rate
■ 13 TTL I/O lines
Physical Information
■Picolo Pro 2/Picolo Pro 2 PCIe
PCI/PCIe board, 121 x 85 mm
Power consumption: 1.7 W (+5 V max @ 240 mA, +12 V @ 10 mA, -12 V @ 30 mA )
■Extension Module
63 x 107 mm
Power consumption: 0.3 W (+12 V max @ 20 mA, -12 V @ 5 mA)
Software Support
■
EasyMultiCam is the unique driver which serves the Picolo, Domino, and Grablink series frame grabbers.
■ The EasyMultiCam driver runs under Microsoft Windows 2000®, XP®, Server 2003®, Vista®, and Linux 7® /Kernels 2.6.18 and 2.6.24
Image Transfer
The Picolo series supports PCI bus mastering. Images are transferred to the PC memory using DMA (Direct
Memory Access) in parallel with the acquisition and processing. Several Picolo series boards can be simultaneously
be in operation within a single PC is supported.
Bitmap Image Formats
Before storing the acquired images to its located memory buffer, a pixel format conversion takes place in real-time.
Numerous color or monochrome formats can be chosen: RGB32, RGB24, RGB16, RGB15, Y8, YCrCb 4:2:2,
YCrCb 4:1:1, Planar YCrCb 4:2:2, Planar YCrCb 4:1:1
3
4
Image Analysis Tools
■Picolo/Picolo PCIe
PCI/PCIe board, 121 x 70 mm
Power consumption: 1 W (+5 V max @ 200 mA)
Multiple Cameras
The Picolo Pro 2/Picolo Pro 2 PCIe can acquire images from unsynchronized cameras within very short switching
times. The switching time is < 33 ms for NTSC and <40 ms for PAL, therefore a total of 16 images can be acquired
per second (typical).
Vision Platforms
Picolo/Picolo PCIe
■ Single channel real-time video capture
■ BNC, DB-9, S-Video connectors
■ 4 TTL I/O lines
2
Cameras
Picolo Pro2 PCIe
Image Acquisition
◆ Color Image: Color video format is compatible with the following composite video input formats: NTSC-M,
NTSC-Japan, PCL-B, PALD, PAL-G, PAL-H, PAL-I, PAM-M, PAL-N and SECAM.
◆ Monochrome Image: The monochrome video acquisition is compatible with CCIR and EIA (RS-170).
◆ Optional Scaling: The acquire images or portions of images can be optionally scaled:
• Acquisition of a programmable area of interest
• Scaling of the image (down to 1:16)
• Adjustment of hue (for NTSC signals), contrast (0 to 200%), brightness and saturation
(0 to 200% for U and V signals)
• Automatic chrominance gain control
Frame Grabbers
Introduction
Ordering Information
■Picolo
Single channel true-color image acquisition card
■Picolo PCIe
PCI Express single channel true-color image acquisition card
■Picolo Pro 2
True-color image acquisition card supports up to 4 cameras
■Picolo Pro 2 PCIe
PCI Express true-color image acquisition card supports up to 4 cameras
www.adlinktech.com 1-14
C121-1-CH1.indd 14
2012/3/6 上午 11:05:38
Picolo Alert
Ultra-fast Multiple-channel PCI/PCI Express® Frame Grabbers
Introduction
Equipped with a video-surveillance FPGA, the Picolo Alert frame grabbers are able to acquire images from
up to sixteen independent cameras with a total digitizing power of 100 fps/120 fps constantly available. The
user is free to share this digitizing power between the sixteen channels, based on the requirements of the
application.
16 video inputs
◆ 100 fps/120 fps constantly available
This is not a peak value! As a unique feature, the Alert boards offer the ability to share a total digitizing power of 100 fps / 120 fps among the sixteen video channels without switching delay.
PICOLO Alert PCIe
Grayscale Camera
Color Camera
Analog
Features
■ Form factor:
• 64-bit, 66 MHz PCI bus (Picolo Alert PCI)
• PCI Express® x1 full-height, half-length (Picolo Alert PCIe)
■ Color (PAL/NTSC), monochrome (CCIR/EIA) cameras
supported
■ 16 video inputs: 200 fps/240 fps constantly available
■ Simultaneous capture and preview functions
• Automatic removal of interlacing artifacts in field mode
• A large frame store for an automatic and smooth regulation of the frame rate in case of a system overuse of the PCI bus. This frame store also ensures a non disruptive image delivery to the PC memory regardless of PCI bus latencies.
• Stable images regardless of video parity: The Picolo Alert boards process the acquired images on the fly eliminating all issues related to the parity management without requiring any processing power from the PC.
◆ Two simultaneous and independent video streams per camera for simultaneous capture and preview functions:
A video channel
PICOLO Alert
PICOLO Alert PCI
Destination 1
Camera
Cropping
Scaling
Contrast,
brightness,
saturation
Pixel
formatting
DMA
controller
CAPTURE
PC Memory,...
Cropping
Scaling
Contrast,
brightness,
saturation
Pixel
formatting
DMA
controller
DISPLAY
PC Graphic
Card,...
Video
Digitizer
Destination 2
Euresys video-surveillance FPGA
Applications
■
Intelligent Transportation System (ITS)
■ Digital Video Recorder (DVR)
■ PC-based surveillance systems
■ Factory monitoring systems
Each camera independently delivers data to two different memory locations in the PC, including the graphic card. Both are fully configurable for acquisition rate, image resolution, cropping, scaling, contrast, brightness, saturation, and storage
Software Support
• EasyMultiCam is the unique driver which serves the Picolo,
Domino, and Grablink series frame grabbers.
• The EasyMultiCam driver runs under Microsoft Windows 7®,2000®, XP®, Server 2003®, Vista®, and Linux Kernels 2.6.18 and 2.6.24.
Ordering Information
■Picolo Alert
Ultra-fast multiple-channel PCI frame grabber
■Picolo Alert PCIe
Ultra-fast multiple-channel PCIe frame grabber
1-15 www.adlinktech.com
C121-1-CH1.indd 15
2012/3/6 上午 11:05:40
Analog
Picolo V16 H.264
Capture and H.264 Video Compression Card for 16 Video Inputs with Audio Capability
1
The Picolo V16 H.264 is designed for demanding video-surveillance applications by offering 16 simultaneous
video streams, in both compressed video (H.264) and raw video streams. Sixteen audio inputs are also
provided to provide audio recording capabilities for any video channel.
The on-board decoders and processor perform on-the-fly data processing-scaling, fixed cropping, contrast,
brightness, saturation, color conversion, mask or caption insertion, decimation, and storage format. The
acquired streams-one compressed and one uncompressed, with different configurations-can be sent from
the frame grabber memory to two different memory locations, such as the main memory of the computer
for storage, and the graphic card memory for preview and display.
Color Camera
Analog
Features
Applications
■
Software Support
■Windows® Platform
• Available for Windows® 7/XP/Server 2003/Vista (64/32-bit)
• Recommended programming environments: C/C++/.NET/
ActiveX controls
Ordering Information
■Picolo V16 H.264
Capture and H.264 video compression card for 16 video inputs with audio capability
Accessories
For more information on cables, please refer to page 2-15
Cabling
• Video connectors for Video In and Out
* One HD44 connector on the bracket
* 75-Ohm removable termination resistors
* Internal pin header connectors
3
• 1 “VIDEO IN”: 34-pin high density header, 1.27 mm pitch
• 1 ‘VIDEO OUTPUT & CASCADE’: 6-pin header
H.264 Compression
◆ 16 simultaneous and independent compressed (H.264) and raw video streams
* Simultaneous capture and preview functions subject to PC bus available bandwidth
• Compressed images
> To be stored on the hard disc
> To be transferred by the network
• Uncompressed images
4
> For immediate display
> For video analytics
Image Analysis Tools
Intelligent Transportation System (ITS)
■ Digital Video Recorder (DVR)
■ PC-based surveillance systems
■ Factory monitoring systems
• One pass-through buffered video output with cascade capability
Vision Platforms
■ PCI Express® x1 compliant
■ On-board real-time H.264 compression, 200 fps/240 fps
at full resolution
■ 16 video inputs PAL or NTSC
■ Simultaneous and independent H.264 compressed and raw
image transfer
■ Precise hardware controlled time stamping
2
Cameras
 .264
Video
◆ 16 real-time analog video inputs - PAL / NTSC * Contrast, brightness and saturation controls available
* Video presence/loss detection
on-board
compression
Grayscale Camera
Frame Grabbers
Introduction
* Precise time stamping
* Independently configurable functions on both streams
• Frame rate control
• Resolution control
• Overlay: insertion of caption text messages on the image
• Masking: insertion of up to four rectangular masking regions on the image
Camera
Decoder
with video
detection
Safety
Substitution
image when no
video detected
Contrast,
brightness,
saturation
Interlaced
to
Progressive
Fixed
Cropping
Insertion
Decimation
Scaler
Encoder
Mask, Caption
1 image out of N
1:1 or 1:2
H.264
Variable
Cropping
Insertion
Decimation
Scaler
Mask, Caption
1 image out of N
1:1, 1:2 or 1:4
Color
Conversion
YUV to RGB
or YUV to YUY
Visual
Formatter
YUV Planar,
YUV Packed
or RGB Packed
■ V16 H.264 Cable
• 0.3 M, one HD44 to sixteen BNC
■ Picolo V16H264 to RTV-E4 Cable
• 0.3 M, one IDC44 to four ICD10
Extension Borad
■ RTV-E4
• Expandable up to 16 channels
www.adlinktech.com 1-16
C121-1-CH1.indd 16
2012/3/6 上午 11:05:42
Picolo U4/U8/U16 H.264
H.264 Compression Cards for 4/8/16 Video Inputs with Audio Capability
Introduction
The Picolo U4, U8, and U16 H.264, respectively feature 4, 8, and 16 video input channels along with audio
capability. These cards deliver dual output streams per video input: an H.264 compressed stream for highquality recording on hard disks and an uncompressed stream for immediate display of the camera signal and
for the application of real-time video analytics. To fit any surveillance application, the possible settings of these
output streams are completely independent. These PCI Express cards are equipped with 4, 8 or 16 highquality audio inputs as well as 8, 16 or 32 I/O lines.
Coming with simple and convenient Windows DirectShow and Linux drivers, the Picolo U4, U8, and U16
H.264 are easy to use and can be immediately integrated into any DVR or CCTV application design. Cables
with BNC video connectors are available for immediate evaluation of the cards.
 .264
on-board
compression
Grayscale Camera
Color Camera
Analog
Features
■ PCI Express® x1 compliant
■ On-board real-time H.264 compression, 200 fps/240 fps
at full resolution
■ 4/8/16 video inputs PAL or NTSC
■ Simultaneous and independent H.264 compressed and
raw image transfer
■ Precise hardware controlled time stamping
Video
◆ 4/8/16 real-time analog video inputs (PAL/NTSC)
* Contrast, brightness and saturation controls available
* Video presence/loss detection
• Video connectors for Video In and Out
* One HD44 connector on the bracket
* 75-Ohm removable termination resistors
* Internal pin header connectors
• 1 Video In: 34-pin high density header, 1.27 mm pitch
• 1 Video Output & Cascade: 6-pin header
H.264 Compression
◆ 4/8/16 simultaneous and independent compressed (H.264) and raw video streams
* Simultaneous capture and preview functions subject to PC bus available bandwidth
• Compressed images
Applications
■
Intelligent Transportation System (ITS)
■ Digital Video Recorder (DVR)
■ PC-based Surveillance Systems
■ Factory Monitoring Systems
Software Support
■Windows® Platform
• Available for Windows® 7/XP/Server 2003/Vista (64/32-bit)
• Recommended programming environments: C/C++/.NET/
ActiveX controls
Ordering Information
> Can be stored on the hard disc
> Can be transferred by the network
• Uncompressed images
> Can be immediately displayed
> Can be used for video analytics
* Precise time stamping
* Independently configurable functions on both streams
• Frame rate control
• Resolution control
• Overlay caption text up to 2 lines with a maximum of 47 characters displayed
Camera
Decoder
with video
detection
Safety
Substitution
image when no
video detected
Contrast,
brightness,
saturation
Interlaced
to
Progressive
■Picolo U4 H.264
H.264 compression card for 4 video inputs with audio capability
■Picolo U8 H.264
H.264 compression card for 8 video inputs with audio capability
■Picolo U16 H.264
H.264 compression card for 16 video inputs with audio capability
Decimation
Scalar
1 Image out of N
4CIF, 2CIF
CIF or QCIF
Decimation
Scalar
1 Image out of N
4CIF, 2CIF
CIF or QCIF
Encoder
H. 264
Compressed images
Visual
Formatter
Uncompressed images
Can be stored on the hard disc
Can be transferred by the network
Can be immediately displayed
Can be used for video analytics
Accessories
For more information on cables, please refer to page 2-15
Cabling
■ U4 H.264 Cable
One HD44M to four RCA Cable
■ U8 H.264 Cable
One HD44M to eight RCA Cable
■ U16 H.264 Cable
One HD44M to sixteen RCA Cable
1-17 www.adlinktech.com
C121-1-CH1.indd 17
2012/3/6 上午 11:05:44
Analog
Domino Melody
Single Channel High-quality Progressive Scan Analog Frame Grabber
1
The Domino Melody is a high-quality and cost-effective acquisition board for industrial monochrome analog
cameras. It incorporates D3 Technology* to provide perfect digital images. This frame grabber is an ideal solution
for mono-camera applications inspecting fast moving objects.
D3 Technology™ (Please refer to page 1-19 for details.)
Analog
Features
■
■
■
■
■
• Black level restoration
• Color control
• Synchronization recovery: vertical and horizontal
• Color sub-carrier removal
• Sampling clock generation
• Look-up table, gamma handling
• Low-pass filtering
• Control over horizontal and vertical pixel counts
• Gain, offset control
Camera and I/O Connectors
Image Acquisition
◆
One HD15 video connector
◆
One RJ45 system connector
◆
One 10-pin header video connector
1
2
3
4
5
6
7
8
3
TR+
TREnhanced I01
Enhanced I02
+5V
GND
ST+
ST-
DB9F Connector
Trigger, Strobe, Enhanced I/O Lines
Ordering Information
■
■Domino Melody
Single channel high-quality progressive scan analog frame grabber
One opto-isolated output line for safe control of external equipment
■ One differential input line for high-speed, robust and flexible control from external equipment
■ Two digital TTL I/O lines for general purpose control
2
in the digitaldomain:
Vision Platforms
■
32-bit, 33 MHz low-profile compatible
10-bit, 40 MHz A/D converter
Supports one single-tap monochrome camera
Trigger, strobe I/O and two enhanced I/O lines
16 MB on-board frame buffer
Asynchronous reset support, shutter control
Full digital signal processing for analog image acquisition D3 Technology™ performs all the following functions 4
Accessories
■
■
EasyMultiCam is the unique driver which serves the Picolo,
Domino, and Grablink series frame grabbers.
Image Analysis Tools
For more information on cables, please refer to page 2-15
Software Support
Cameras
Grayscale Camera
◆
Frame Grabbers
Introduction
Cabling
■ Domino Cable
5 M, one HD15 to one Hirose
The EasyMultiCam driver runs under Microsoft Windows 2000®, XP®, Server 2003®, Vista®, 7and Linux Enterprise Server 10.
www.adlinktech.com 1-18
C121-1-CH1.indd 18
2012/3/6 上午 11:05:45
Domino Harmony
2-CH Color/Monochrome Progressive Scan Analog Frame Grabber
Introduction
The Domino Harmony is a dual-camera acquisition board for industrial monochrome and RGB analog
cameras. It incorporates D3 Technology™ to provide perfect digital images to color applications.
D3 Technology™
Benefits
◆
No need for pixel clock, or even HD/VD, thanks to absolute digital stability
◆
Simplified cabling, improved robustness
◆
Excellent performance reproducibility
Grayscale Camera
RGB Camera
◆
Reduce the analog processing of the video signal to a minimum
• Ultra-low jitter, JITTER = 0.32 ns
• High image quality, SNR = 64 dB Analog
Features
■ 64-bit, 66MHz PCI bus
■ One RGB or two monochrome cameras
■ Four 10-bit, 40 MHz A/D converters
■ Two DMA channels
■ Trigger, strobe I/O and two enhanced I/O lines
■ Asynchronous reset support, shutter control, synchronization
■ 32 MB frame buffer
Applications
■
■
■
■
■
■
Quality control
Semiconductor inspection
PCB inspections
FPD inspections
On-the-fly image acquisition
High frame rate image acquisition
D3 Technology performs all the following functions in the digital domain:
◆
Black level restoration
◆
Sampling clock generation
◆
Gain, offset control
◆
Color sub-carrier removal
◆
Control over horizontal and vertical pixel counts
◆
Synchronization recovery: vertical and horizontal
◆
Low-pass filtering
In the new Domino frame grabbers implementing D3 Technology, the input video signal is immediately
digitized with a very high accuracy and a high frequency. Analog conditioning of the signal is reduced to a
minimum and all signal processing tasks traditionally performed by analog circuits are now carried out in the
digital domain.
Software Support
• EasyMultiCam is the unique driver which serves the
Picolo, Domino, and Grablink series frame grabbers.
• The EasyMultiCam driver runs under Microsoft Windows
2000® , XP® , Server 2003® , Vista® , 7and Linux Enterprise
Ordering Information
■Domino Harmony
2-CH color/monochrome progressive scan analog frame grabber
Accessories
For more information on cables, please refer to page 2-15
Camera and I/O Connectors
Cabling
■ Domino Cable
5 M, one HD15 to one Hirose12
TRXTRYSTXSTYPGND
TRX+
TRY+
STX+
STY+
+5V
6
1
Enhanced I01
2
Enhanced I02
3
Enhanced I03
14 10 4
Enhanced I04
15
GND
11
7
12
13
8
9
5
1-19 www.adlinktech.com
C121-1-CH1.indd 19
2012/3/6 上午 11:05:48
Analog
Domino Symphony PCIe
High-speed 4-CH PCI Express® Analog Frame Grabber
1
The Domino Symphony PCIe is a high-speed analog frame grabber. It provides affordable image acquisition
for applications with multiple monochrome cameras.
D3 technology™ (Please refer to page 1-19 for details.)
D3 Technology performs all the following functions in the digital domain:
◆ Black level restoration
◆ Sampling clock generation
◆ Gain, offset control
◆ Color sub-carrier removal
◆ Control over horizontal and vertical pixel counts
◆ Synchronization recovery: vertical and horizontal
◆ Low-pass filtering
Analog
2
Cameras
Grayscale Camera
Frame Grabbers
Introduction
Camera and I/O Connectors
Features
Applications
■
■
■
■
■
Software Support
■
EasyMultiCam is the unique driver which serves the Picolo,
Domino, and Grablink series frame grabbers.
■ The EasyMultiCam driver runs under Microsoft Windows 2000®, XP®, Server 2003®, Vista®, 7and Linux Enterprise Server 10.
TRA+
TRB+
TRC+
TRD+
STA+
STB+
STC+
STD+
PGND
19
20
21
22
23
24
25
26
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
3
I01
GND
I02
GND
I03
GND
I04
GND
+5V
4
Type of Connector
I/O lines
On the bracket:
One HD26 system connector
4 opto-isolated output lines for safe control of external
equipment
Internal:
One 26-pin header
4 differential LVDS input lines for high-speed, robust and
flexible control from external equipment
4 digital TTL I/O lines for general purpose control
Image Analysis Tools
■
Quality control
Semiconductor inspection
PCB inspection
FPD inspection
On-the-fly image acquisition
High frame rate image acquisition
TRA+
TRB+
TRC+
TRD+
STA+
STB+
STC+
STD+
Vision Platforms
■ PCI Express® x1 full-height, half-length
■ Supports four single-tap cameras
■ Trigger, strobe, enhanced I/O lines
■ 10-bit 65 MHz A/D converters
■ 64 MB frame buffer
■ Supports D3 technology
Ordering Information
■Domino Symphony PCIe
High-speed 4-CH PCI Express® analog frame grabber
Accessories
For more information on cables, please refer to page 2-15
Cabling
■ Domino Symphony Cable
0.3 M, one HD44 to four HD15
■ Domino Cable
5 M, one HD15 to one Hirose12
www.adlinktech.com 1-20
C121-1-CH1.indd 20
2012/3/6 上午 11:05:50