Transport Products Product Selector Guide
Table of Contents
Physical Layer Devices
Framer/Mappers
Datacom PHY
S19225 VOLTA-192..............................................................25
QT2022/QT2032.....................................................................7
S19227 RUBICON-LH/S19262 TIPI-RUBICON.....................26
QT2025...................................................................................8
S19231 RUBICON-METRO...................................................27
QT2025-1................................................................................9
S19258 PEMAQUID..............................................................28
QT2225.................................................................................10
S19263 PEMAQUID-LW........................................................29
QT2225-1..............................................................................11
S4809 DRAVA.......................................................................30
Telecom PHY
S1220...................................................................................12
S1217/S1221........................................................................13
S19233.................................................................................14
S19235/S19237/S19250......................................................15
S19252.................................................................................16
S3155...................................................................................17
S3394...................................................................................18
S3485...................................................................................19
S4882...................................................................................20
S4884...................................................................................21
S4886...................................................................................22
2
AppliedMicro Product Selector Guide
S4815 RUBICON-48.............................................................31
S10123/S10124/S10126 YAHARA........................................32
S10130 URAL.......................................................................34
Switch Fabrics
PRS 5G/C48X.......................................................................37
PRS 20G/C192X...................................................................38
PRS Q-80G...........................................................................39
Introduction
Connecting the Technology that Connects Us All
Digital Content
Storage
Network
Convergence
Triple-Play
Applications
Transport Products
3
Datacom PHY
Telecom PHY
QT2022/QT2032
S1220
S3394
QT2025
S1217/S1221
S3485
QT2025-1
S19233
S4882
QT2225
S19235/S19237/S19250
S4884
QT2225-1
S19252
S4886
S3155
Physical Layer Devices
Datacom PHY Selection Matrix
Device
Function
QT2022/32 10GE Serial-to-XAUI LAN/WAN PHY
Typical Power
[mW]
Package, Size
[mm²]
Temp. grade1
Leaded/RoHS2
9.9-10.52 Gbps 1.2 V
900
BGA 15x15
K
L/R
Data Rate
Power Supply
QT2025
1G/10GE Serial-to-XAUI PHY/EDC
for SFP+, XFP and 10GBASE-KR
1.25 Gbps
9.9-10.52 Gbps 1.2 V, 1.8 V
1500
BGA 13x13
K
L/R
QT2025-1
1G/10GE Serial-to-XAUI PHY/EDC
for SFP+
1.25 Gbps
9.9-10.52 Gbps 1.2 V, 1.8 V
1500
BGA 13x13
K
L/R
QT2225
Dual 1G/10GE Serial-to-XAUI PHY/EDC
for SFP+, XFP and 10GBASE-KR
1.25 Gbps
9.9-10.52 Gbps 1.2 V, 1.8 V
3000
BGA 23x23
K
L/R
QT2225-1
Dual 1G/10GE Serial-to-XAUI PHY/EDC
for SFP+
1.25 Gbps
9.9-10.52 Gbps 1.2 V, 1.8 V
3000
BGA 23x23
K
L/R
K = 0C to +80C
L = Leaded; R = RoHS Compliant
1
2
Transport Products
5
Telecom PHY Selection Matrix
Device
Function
Data Rate
Power Supply
S1217
OC-3/12 Transceiver
OC-3/12
S1220
Quad OC-3/12 CDR
S1221
Package,
Size [mm²]
Temp.
grade1
Leaded/
RoHS2
1.2 V & 2.5/3.3 V 320
81 PBGA 17x17
I
L/R
OC-3/12
1.2 V & 2.5/3.3 V 620
196 PBGA 15x15
I
L/R
Quad OC-3/12 Transceiver
OC-3/12
1.2 V & 2.5/3.3 V 715
255 PBGA 17x17
I
L/R
S19233
Dual CDR with EDC
9.9 – 11.3 Gbps
1.8 V & 3.3 V
49 PBGA 6x6
I
L/R
S19235
10G 16-bit Transceiver
9.9 – 11.1 Gbps
1.2 V & 1.8/3.3 V 1100
255 PBGA 17x17
I
L
S19237
10G 16-bit Transceiver
9.9 – 10.7 Gbps
1.2 V & 1.8/3.3 V 1000
255 PBGA 17x17
I
L
S19250
10G 16-bit Transceiver
9.9 – 11.3 Gbps
1.2 V & 3.3 V
1100
255 PBGA 17x17
I
L/R
S19252
10G 16-bit Transceiver
9.9 – 11.3 Gbps
1.2 V & 3.3 V
1100
324 PBGA 15x15
I
L/R
S3155
OC-48 16-bit Transceiver
OC-48/FEC
1.2 V & 2.5/3.3 V 650
196 PBGA 15x15
I
L/R
S3394
EDC based SFI-4 DeMux
9.9 – 11.3 Gbps
1.8 V & 3.3 V
2500
196 PBGA 15x15
I
L
S3485
Multi rate 4-bit Transceiver
OC-3/12/24/48/FEC Escon, HDTV,
FC, 2FC
1.2 V & 1.8 V
345
121 PBGA 12x12
I
L/R
S4882
Continuous Rate Transceiver
10 Mbps – 4.25 Gbps
1.2 V & 3.3 V
900
144 PBGA 13x13
I
L/R
S4884
Continuous Rate Transceiver
10/100/1000 Base-X Ethernet, .25/.5/1/
2XFibre Channel, OC-3/12/48, OTU-1
1.2 V & 3.3 V
900
144 PBGA 13x13
I
L/R
S4886
Continuous Rate CDR
10 Mbps – 4.25 Gbps
1.2 V & 3.3 V
450
49 PBGA 8x8
I
L/R
I = -40˚C through +85˚C; C = 0˚C through 70˚C
L = Leaded; R = RoHS Compliant
1
2
6
AppliedMicro Product Selector Guide
Typical
Power [mW]
740
QT2022/QT2032 10 GE Serial-to-XAUI PHY
for LAN/WAN
Datacom
PHY
Features
Applications
• Complies with IEEE802.3ae specifications for LAN (QT2022
and QT2032) and WAN (QT2032 only)
• 10G Ethernet and FibreChannel LAN, WAN and SAN
• WAN Interface Sublayer (WIS) with bypass
• XENPAK, XPAK and X2 modules
• System cards with XFP
• SONET-compliant output jitter
• Adjustable serial and XAUI output amplitude
• Comprehensive interface with XFP module
• Integrated receive LA
• LOS with adjustable threshold
• Jumbo frame support
• Multiple test features, including loopbacks and PRBS/jitter
generators and checkers
• 0.9 W power consumption
• 1.2 V power supply
• Available in leaded or leadfree/RoHS package
ROSA
Switch/
ASIC
10GE
MAC
XAUI
QT2032
XFI
S19233
TOSA
XFP Module
Transport Products
7
QT2025 1G/10GE Serial-to-XAUI PHY/EDC
for SFP+, XFP and 10GBASE-KR
Datacom
PHY
Features
Applications
• 1/10Gbps Ethernet and Fibre Channel
• High density backplanes based on 10GBASE-KR/
1000BASE-KX
• Advanced receive EDC with auto tap weight adjustment
& advanced tracking
• High-performance serial transmitter with wave shaping
• Hostboards based on SFP+/SFP limiting modules
including 10GBASE-SR/LR/ER & 1000BASE-X
• XAUI interface with equalization and transmit wave shaping
• Links with passive & active Direct Attach SFP+ cables
• 1.5 W power dissipation
• Hostboards based on XFP modules including
10GBASE-R & -W protocols
• Integrated loopbacks and test features
• Compliant to applicable IEEE & INCITS Specs
• Available in leaded or leadfree/RoHS package
Backplane Specific Features
• 1000BASE-KX and 10GBASE-KR data over 1m
of backplane and multiple connectors
• Auto-negotiation and training
• Integrated FEC with bypass
SFP+ Specific Features
• 10GBASE-SR/LR/ER SFP+ and direct attach cable (twinax)
XFP Module Specific Features
• High performance XFI interface
CPU
North
Bridge
MAC
8
AppliedMicro Product Selector Guide
XAUI
QT2025
QT2025
XAUI
QT2025
XAUI
QT2025
XAUI
Switch
QT2025-1 1G/10GE Serial-to-XAUI PHY/EDC
for SFP+
Datacom
PHY
Features
Applications
• 1/10Gbps Ethernet and Fibre Channel
• Hostboard termination for SFP+/SFP modules including
10GBASE-SR/LR/ER/LRM & 1000BASE-X
• 10GBASE-SR/LR/ER/LRM SFP+ and direct
attach cable (twinax)
• Links with passive & active Direct Attach SFP+ cables
• Advanced receive EDC with auto tap weight
adjustment & advanced tracking
• High-performance serial transmitter with wave shaping
• XAUI interface with equalization and transmit wave shaping
• 1.5 W power dissipation
• Integrated loopbacks and test features
• Compliant to applicable IEEE & INCITS Specs
SFP+ Module
Switch/
ASIC
10GE
MAC
ROSA
XAUI
QT2025-1
SFI
TOSA
Transport Products
9
QT2225 1G/10GE Serial-to-XAUI PHY/EDC
for SFP+, XFP and 10GBASE-KR
Datacom
PHY
Features
Applications
• 1/10Gbps Ethernet and Fibre Channel
• High density backplanes based on 10GBASE-KR/
1000BASE-KX
• Advanced receive EDC with auto tap weight adjustment
& advanced tracking
• Hostboards based on SFP+/SFP limiting modules
including 10GBASE-SR/LR/ER & 1000BASE-X
• High-performance serial transmitter with wave shaping
• XAUI interface with equalization and transmit wave shaping
• 1.5 W per port power dissipation
• Integrated loopbacks and test features
• Links with passive & active Direct Attach SFP+ cables
• Hostboards based on XFP modules including
10GBASE-R & -W protocols
• Compliant to applicable IEEE & INCITS Specs
• Available in leaded or leadfree/RoHS package
Backplane Specific Features
• 1000BASE-KX and 10GBASE-KR data over 1m
of backplane and multiple connectors
• Auto-negotiation and training
• Integrated FEC with bypass
SFP+ Specific Features
• 10GBASE-SR/LR/ER SFP+ and direct attach cable (twinax)
XFP Module Specific Features
• High performance XFI interface
XAUI
CPU
QT2225
XAUI
North
Bridge
XAUI
QT2225
Switch
XAUI
XAUI
XAUI
10 AppliedMicro Product Selector Guide
XAUI
QT2225
MAC
QT2225
XAUI
QT2225-1 1G/10GE Serial-to-XAUI PHY/EDC
for SFP+
Datacom
PHY
Features
Applications
• 1/10Gbps Ethernet and Fibre Channel
• Hostboard termination for SFP+/SFP modules including
10GBASE-SR/LR/ER/LRM & 1000BASE-X
• 10GBASE-SR/LR/ER/LRM SFP+ and direct attach
cable (twinax)
• Links with passive & active Direct Attach SFP+ cables
• Advanced receive EDC with auto tap weight adjustment
& advanced tracking
• High-performance serial transmitter with wave shaping
• XAUI interface with equalization and transmit wave shaping
• 1.5W per port power dissipation
• Integrated loopbacks and test features
• Compliant to applicable IEEE & INCITS Specs
SFP+ Module
ROSA
XAUI
Switch/
ASIC
SFI
TOSA
2x10GE
MAC
QT2225-1
ROSA
XAUI
SFI
TOSA
SFP+ Module
Transport Products
11
S1220 SONET/SDH/ATM Quad OC-3/12 CDR
Features
Applications
• Complies with Bellcore and ITU-T specifications for jitter
tolerance, jitter transfer, and jitter generation
• SONET/SDH OC-3/OC-12
• On-chip high-frequency PLLs for clock generation
and clock recovery
• Section repeaters
• Supports Data Rates of 155.52 Mbps (OC-3)
and 622.08 Mbps (OC-12)
• Broad-band cross-connects
Telecom
PHY
• SONET/SDH test equipment
• Add Drop Multiplexers (ADM)
• LVDS or LVPECL differential serial interface
• Fiber optic terminators
• Internal termination of the optic’s LVPECL driver renders
a seamless power saving connection
• Fiber optic test equipment
• Directly compatible with 2.5 V or 3.3 V LVDS, 3.3 V LVPECL
(DC and AC)
• ATM over SONET/SDH
• SONET/SDH modules
• 1.2 V and 3.3 V/2.5 V Power supply
• Typical 620 mW in LVDS I/O mode, 196 Ball Grid Array
• Receiver lock detect output for each channel
• Signal detect input on each channel
• Mixed Mode OC-3/OC-12, Independent power down
of unused channels
Optical
Transceiver
Optical
Transceiver
S1220
Optical
Transceiver
Optical
Transceiver
12 AppliedMicro Product Selector Guide
ASIC/
FPGA
S1217/S1221 OC-3/12 SONET/SDH
Single/Quad 8-bit Transceiver
Telecom
PHY
Features
• Built-In Self Test (BIST) Feature
• Complies with Bellcore and ITU-T specifications for jitter
tolerance, jitter transfer, and jitter generation
• Single: Typ. 320 mW in LVDS I/O mode, 81 pin PBGA
• On-chip high-freq. PLLs for clock generation and
clock recovery
• Quad: mixed OC-3/ OC-12, independent power down
of unused channels
• Supports Data Rates for 155.52 Mbps and 622.08 Mbps
• Quad: Typical 715 mW in LVDS I/O mode, 255 pin PBGA
• 8-bit LVCMOS Parallel data path
Applications
• LVDS or LVPECL differential serial interface
• SONET/SDH OC-3/OC-12
• Internal termination of the optic’s LVPECL driver renders
a seamless power saving connection
• SONET/SDH modules
• Directly compatible with 2.5 V or 3.3 V LVDS, 3.3 V LVPECL
• ATM over SONET/SDH
• 1.2 V and 3.3 V/2.5 V supply
• Section repeaters
• Receiver lock detect outputs
• Add Drop Multiplexers (ADM)
• Signal detect inputs
• Broad-band cross-connects
• Selectable reference frequencies of 19.44, 77.76 or 155.52 MHz
• Fiber optic terminators
• SONET/SDH/Fiber optic test equipment
• Internal FIFO to decouple transmit clocks
• Various diagnostic loopback modes
Optical
Transceiver
S1217
Optical
Transceiver
Optical
Transceiver
Optical
Transceiver
Optical
Transceiver
/8
ASIC/
FPGA
Single
/8
S1221
/8
/8
ASIC/
FPGA
Quad
/8
Transport Products
13
S19233 10G Dual CDR with EDC for 100km
XFP applications
Telecom
PHY
Features
• Lock detect indication
• Complies with ITU-T specifications, 2.7 mUIrms max. jitter
generation (50 KHz–80 MHz)
• -40 to 85°C operation
• Complies with XFP MSA Specifications
• I2C serial Interface
• 9.95 to 11.3 Gbps operation
• Serial interface polarity swap (per input)
• Optimized for up to 100 km SMF
• Pin compatible with S19256
• Dual CDR—Typical Power 740 mW
• 6mm x 6mm, 49 pin PBGA package with 0.8mm pitch,
RoHS package option
• Optical and Electrical Loopbacks
• Threshold & Phase Adjust
• CML serial input sensitivity at 10 mV pk-pk Differential
• Offset Cancellation Circuit
• RSSI—Receive Signal Strength Indicator
• LOS—Loss of Signal detect
• Termination and Biasing for AC coupling
• Reference clocks range 155–176 MHz
• Equalization on the Electrical Receive Side
• 1.8/3.3 Volt Power Supply
Applications
• XFP MSA Modules
• 10GbE and 10G FC Designs
• SONET/SDH Based Transmission Equipments
• SONET/SDH Test Equipments
• SONET/SDH/FEC DWDM Equipments
• Serial interface polarity swap (per input)
• Reconfigurable as data-rate agnostic Equalizer
with CDR bypassed
/16
ROSA
S19233
TOSA
XFP Module
14 AppliedMicro Product Selector Guide
S19235/37
/16
S19235/S19237/S19250 10G SONET/SDH/FEC/
Ethernet/FC 16-bit Transceiver
Features
• Complies with OIF SFI-4 Phase 1, Telecordia/ITU-T GR-253-ILR,
300-pin MSA, IEEE 802.3 and XFP MSA Standards
Telecom
PHY
• Adaptive Post-Amplifier Offset Adjust to minimize offset
for high OSNR conditions
• Phase Adjust of -0.11 to +0.085 UI
• Operational from 9.95 Gbps to 11.1/ 9.95 to 10.7/9.95
to 11.3 Gbps
• Reference Frequency of 155.52 MHz
(or equivalent FEC/ 10GbE rate)
• Low Power (1.1/1.0/1.1 W Typical)
• Input sensitivity of of 10 mV p-p (single-ended) at 10-12 BER
• 1.2 V and 3.3 V/1.8 V option on S19235/37 Power Supply
Transmitter Features
• Built-In Self Test (BIST) feature with Error Counter
• Ref. Frequency of 155.52 or 622.08 MHz
(or equivalent FEC/ 10GbE rate)
• On-chip High-Freq. PLLs for Clock Recovery
and Clock Generation
• 16-bit LVDS Parallel Data Path
• 155.52 MHz and 622.08 MHz (or equivalent FEC/10GbE
rate) Clock Outputs
• TX and RX Lock Detect Indicators
• Internal, Self-Initializing FIFO to Decouple Transmit Clocks
• Serial and Reference Loop Timing Modes
• Slew rate control, pre-emphasis SFP+ compliant
• Line and Diagnostic Loopback Mode for Faulty
Mode Identification
• DuoBinary encoder
• 10 GHz clock output
• SONET Jitter Transfer Compliance with External XVCO
• 255 PBGA Package, 17mm x 17mm, 1.0mm pitch
Applications
• Internal, Self-Initializing FIFO to Decouple Transmit Clocks
• 300 pin MSA Modules
• Programmable TSD Output Differential Swing
• SONET/SDH and 10GbE-Based Transmission Systems
• Pin compatible with S19237
• SONET/SDH Modules
Receiver Features
• Electronic Dispersion Compensation
• Tolerates up to 24˝ of Standard FR-4 Material
• 10GbE Jitter Tolerance Compliance
• Section Repeaters
• Add Drop Multiplexers (ADM)
• Broad-Band Cross-Connects
• Fiber Optic Terminators and Test Equipment
XFP Module
S19235
&
S19237
&
S19250
/16
Rubicon/
ASIC
/16
Transport Products
15
S19252 10G SONET/SDH/FEC/Ethernet/FC
16-bit Transceiver
Features
Transmitter Features
• Operational from 9.9 Gbps to 11.3 Gbps
• Ref. Frequency of 155.52 or 622.08 MHz
(or equiv. FEC/ 10GbE rate)
• 10 mV input sensitivity, EDC and RSSI (Receive Signal
Strength Indicator)
• Low Power (1.1 W Typical)
• 1.2 V and 3.3 V Power Supply
• Built-In Self Test (BIST) feature with Error Counter
• On-chip High-Freq. PLLs for Clock Recovery
and Clock Generation
• 16-bit LVDS Parallel Data Path
• TX and RX Lock Detect Indicators
• Serial and Reference Loop Timing Modes
• Line and Diagnostic Loopback Mode for Faulty Mode
Identification
Telecom
PHY
• 155.52 MHz and 622.08 Ghz (or equivalent FEC/10GbE rate)
Clock Outputs
• Internal, Self-Initializing FIFO to Decouple Transmit Clocks
• Slew rate control, pre-emphasis SFP+ compliant
• DuoBinary encoder
• 10 GHz clock output
Applications
• 300 pin MSA Modules
• SONET/SDH and 10GbE-Based Transmission Systems
• SONET/SDH Modules
• SONET Jitter Transfer Compliance with External XVCO
• Section Repeaters
• Complies with OIF SFI-4 Phase 1, Telecordia/ITU-T
GR-253-ILR, 300-pin
• Add Drop Multiplexers (ADM)
• MSA, IEEE Draft P802.3ae and XFP MSA Standards
• Fiber Optic Terminators and Test Equipment
• Broad-Band Cross-Connects
• 324 pin PBGA Package, 15mm x 15 mm, 0.8 mm pitch
• Internal, Self-Initializing FIFO to Decouple Transmit Clocks
• Programmable TSD Output Differential Swing
• MDIO, I2C and SPI serial interface
Receiver Features
• EDC
• Tolerates up to 24" of Standard FR-4 Material
• 10GbE Jitter Tolerance Compliance
• Adaptive Post-Amplifier Offset Adjust to minimize offset
for high OSNR conditions
• Phase Adjust of -0.11 to +0.085 UI
• Reference Frequency of 155.52 MHz
(or equivalent FEC/10GbE rate)
• Input Sen, of 10 mV p-p (single-ended) at 10-12 BER
SFI4.1
ELM
Driver
ELM
TIA
APD
Receiver
S19252
Receiver
16 AppliedMicro Product Selector Guide
S3155 OC-48 16-Bit Differential/Single-ended
Transceiver
Telecom
PHY
Features
Applications
• Complies with Telcordia and ITU-T specifications
• Wavelength Division Multiplexing (WDM) equipment
• Integrated clock data recovery
• SONET/SDH-based transmission systems
• On-chip high-frequency PLL for clock generation and
clock recovery
• SONET/SDH modules
• Supports OC-48 (2.488 Gbps) with FEC
• ATM over SONET/SDH
• Reference frequency of 155.52 to 166.63 MHz
• Add Drop Multiplexers (ADM)
• Interface to LVCMOS/LVTTL logic
• Broad-band cross-connects
• 16-bit single-ended, differential LVPECL or LVDS data I/O
• Fiber optic terminators
• 196 PBGA package with RoHS option
• Fiber optic test equipment
• SONET/SDH test equipment
• Diagnostic and line loopback mode
• Lock detect
• Built-in termination resistors
• Signal detect input with polarity select
• Low Jitter LVPECL/LVCMOS interface
• Internal FIFO to decouple transmit clocks
• Dual 1.2 V and 2.5/3.3 V supply
• Typical power: 650 mW
• Built-in self test
Optical
Transceiver
S3155
/16
/16
ASIC/
FPGA
Transport Products
17
S3394 10G 16-bit EDC DeMux
with High Performance EDC
Telecom
PHY
Features
Applications
• Operational data rates at 9.9 to 11.3 Gbps
• SONET/SDH/FEC-based transmission systems/modules
• Dispersion (ISI) compensation
• Section repeaters
• Robust CRU—can extract clock in low OSNR environments
• Add Drop Multiplexers (ADM)
• 16-bit OIF Compliant LVDS Data Path with Programmable
Bit Swap
• Broad-band cross-connects
• Integrated low pass filter (coarse/fine adjust).
• Fiber optic/SONET/SDH/FEC test equipment
• Peak detector for input power monitoring
(SSI—Signal Strength Indicator)
• Metro RZ/NRZ Networks
• Threshold and phase adjust capability
• Sensitivity 6.0 mV (p-p, SE)
• Fiber optic terminators
• Long Haul/Ultra Long RZ/NRZ Networks
• DWDM Transport and Metro Networks Fiber Optic
Test Equipment
• External phase adjust ± 0.30 UI
• Linearity gain control – variable gain adjust
• Selectable reference freq. of 155.52 or 622.08 MHz
(or various protocol (+FEC))
• Complies with Telcordia/ITU-T/ OIF specifications
• 3.3 V and 1.8 V power supplies
• Compact 15mm x 15mm 196 Pin CBGA Package
18 AppliedMicro Product Selector Guide
Optical
RX
S3394
Optical
Tx
S19252
Tx Only
/16
Rubicon/
Any
FEC
Device
/16
Telecom
PHY
S3485 OC-48 4-bit Multi Rate Transceiver
Features
• Complies with Bellcore and ITU-T specifications for jitter
tolerance, jitter transfer and jitter generation
• Supports the following rates:
Receiver Features
• Low-jitter CML differential or single-ended serial interface
• Reference frequency of 155.52 MHz (or equivalent rate)
– OC-3/12/24/48 with or w/o FEC
Transmitter Features
• Reference frequency of 155.52 MHz (or equivalent rate)
– HDTV (1.485 Gbps), D1 (1.38 Gbps)
• 155.52 MHz (or equivalent rate) clock output
– Fibre Channel (1062 Mbps) & 2 x Fibre Channel
(2.124 Gbps)
• Internal, self-initializing FIFO to decouple transmit clocks
– Gigabit Ethernet (1.25 Gbps)
Applications
– DTV (143.18 Mbps), ESCON (200 Mbps)
• Low Power (345 mW Typical)
• Built-In Self Test (BIST) Feature
• 121 PBGA package with RoHS option
• On-chip High-Frequency PLL for Clock Generation
and Clock Recovery
• 4-bit LVDS Parallel Data Path
• TX and RX Lock Detect Indication
• Serial Loop Timing Mode
• SONET/SDH-based transmission systems
• SONET/SDH modules
• Wavelength Division Multiplexing (WDM)
• Section repeaters
• Add Drop Multiplexers (ADM)
• Broad-band cross-connects
• Fiber Optic Terminators
• Fiber Optic Test Equipment
• Line and Diagnostic Loopback Mode for Faulty
Node Identification
• Operational Temperature Range Up to 85ºC
• Dual 1.2 V and 1.8 V supply
Optical
Transceiver
S3485
/4
/16
ASIC/
FPGA
Transport Products
19
S4882 10 Mbps to 4.25 Gbps Continuous
Rate Transceiver
Telecom
PHY
Features
• Clock Multiplier Unit (CMU) Capability
• Complies with Bellcore/ITU-T Specs for Jitter Tolerance/
Transfer/Generation as well as the Related GE/FC/CPRI
Specifications.
• Intelligent Power Down of Selected Features/ Functions
for Power Restricted Applications
• 5 mV Diff Input Sensitivity at 1x10-12 BER
• Single Reference Clock for 10 Mbps–4.25 Gbps RX/TX
Continuous Rate Operation
• AMCC’s Frequency Hold Capability to Maintain Downstream
Clocking and Aid Fast Acquisition Recovery from Input Alarm
Conditions.
• 1.2 V & 3.3 V Power Supply Requirements
• Frame / Boundary Detection and Byte Alignment for SONET/
SDH and 8B/10B encoded protocols.
• JTAG (IEEE 1149.1-2001 compliant) & Dual Independent
Pattern Generators/Checkers
• Output Data De-Emphasis with Adjustable Swing and Phase
Continuous Output Clocking
• Typical Power Dissipation 900 mW
• Programmable Parallel Data Path (4/8/
10-bit or 4-bit Redundant Data Mode)
Applications
• SONET/SDH/OTU-based transmission systems
• Post Amp Offset Adjust, Loss of Signal with Run Length
Detector, Signal Detect Input, Receive Signal Strength
Indicator and RX/TX Lock Detect Output Circuits
• Any rate line cards including 4 G FC
• Integrated PLL Loop Filter Components & I/O Terminations
for a Compact Applications
• Multi-Service Protocol Platforms
• Dual REFCLK Inputs for Flexible CDR/CSU
Reference Clocking
• Video Applications
• Additional CDR & CSU Programmable Prescaler Clock
Outputs for Down/Upstream Timing
• Fiber Optic Test Equipment
• Transmit FIFO Depth allows for Breathing of Transmit
PCLK & PICLK Clocks
• Add Drop Multiplexers (ADM)
• Protocol Independent Switches & Routers
• Metro DWDM Network (Client side and Line)
• Wireless
• I2C & SPI Compatible Control Interfaces with Global Alarm
Interrupt, Status, & Control
Optical
Transceiver
20 AppliedMicro Product Selector Guide
S4882
/4, /8, 10
Rubicon-48
ASIC/
FPGA
S4884 SONET/SDH/FC/GbE/HD-SDI
Multi Rate Transceiver
Telecom
PHY
Features
• Dual Independent Pattern Generators/ Checkers
• Single reference clock for 13 different data rates ranging
from 10 Mbps to 2.7Gbps (programmable by hardware
pins or by registers).
• Less than 900 mW Typical Power Dissipation
• Frame / Boundary Detection and Byte Alignment for SONET/
SDH and 8B/10B encoded protocols and Differential RX/TX
Decoding/Encoding.
Applications
• Output Data De-Emphasis with Adjustable Swing and Phase
Continuous Output Clocking
• Protocol Independent Switches & Routers
• Programmable Parallel Data Path (4/8/10- bit or 4-bit
Redundant Data Mode) with Optional Parity & Programmable
Auto Squelch Functionality
• Metro DWDM Network (Client side and Line)
• Post Amp Offset Adjust, Loss of Signal with Run Length
Detector, Signal Detect Input, Receive Signal Strength
Indicator and RX/TX Lock Detect Output Circuits.
• Standard and Green/RoHS Lead Free Package Options
• Multi-Service Protocol Platforms
• Video Applications
• Supported data rates are:
– 10 Mbps: 10Base-X Ethernet
– 125 Mbps: 100Base-X Ethernet/Fast Ethernet
– 155.52 Mbps: STM-1/OC-3
• Integrated PLL Loop Filter Components & I/O Terminations
for a Compact Applications
– 200 Mbps: ESCON/SBCON
• Dual REFCLK Inputs for Flexible CDR/CSU Reference
Clocking and/or External Clean- Up
– 531.25 Mbps: 1/2 Fibre Channel
• Additional CDR & CSU Programmable Prescaler Clock
Outputs for Down/ Upstream Timing
– 265.625 Mbps: 1/4 Fibre Channel
– 622.08 Mbps: STM-4/OC-12
– 1.0625 Gbps: Fibre Channel
• I2C & SPI Compatible Control Interfaces with Global Alarm
Interrupt, Status, & Control
– 1.25 Gbps: 1000Base-X Ethernet/ Gigabit Ethernet
• 1.2 V & 3.3 V Power Supply Requirements
– 2.125 Gbps: 2x Fibre Channel
• Complies with Bellcore/ITU-T Specs for Jitter Tolerance/
Transfer/Generation as well as the Related GE/FC/CPRI
Specifications.
– 2.488 Gbps: STM-16/OC-48
– 1.485 Gbps: SMPTE 292M
– 2.666 Gbps: OTU-1Applications
SONET/SDH
2.48 GHz
OTU1
2.67 GHz
E/O
O/E
NETWORK SIDE
Multi-Rate
Network Signal
S4884
Rubicon-48
DW/FEC/PM
Async Mapper
S4884
CLIENT SIDE
Multi-Rate Client
Signal
O/E
E/O
LO
LO
155.52 MHz
155.52 MHz
Transport Products
21
S4886 10 Mbps to 4.25 Gbps
Continuous Rate CDR
Telecom
PHY
Features
Applications
• Complies with Bellcore/ITU-T Specs for Jitter Tolerance/
Transfer/Generation as well as the Related GE/FC/CPRI
Specifications
• SONET/SDH/OTU-based transmission systems
• 5 mV Diff Input Sensitivity at 1x10-12 BER
• Single Reference Clock for 10 Mbps–4.25 Gbps Continuous
Rate Operation
• Any rate line cards including 4 G FC
• Add Drop Multiplexers (ADM)
• Multi-Service Protocol Platforms
• Protocol Independent Switches & Routers
• Output Data De-Emphasis with Adjustable Swing and Phase
Continuous Output Clocking
• Video Applications
• Post Amp Offset Adjust, Loss of Signal with Run Length
Detector, Signal Detect Input, Receive Signal Strength
Indicator and Lock Detect Output Circuits
• Fiber Optic Test Equipment
• Metro DWDM Network (Client side and Line)
• Wireless
• Integrated PLL Loop Filter Components & I/O Terminations
for a Compact Applications
• Additional CDR Programmable Pre-scaler Clock Output for
Down/Upstream Timing
• S4886 I2C Compatible Control Interface with Global Alarm
Interrupt, Status, Control, & Integrated Pattern Checker.
• Clock Multiplier Unit (CMU) Capability
• AMCC’s Frequency Hold Capability to Maintain Downstream
Clocking and Aid Fast Acquisition Recovery from Input Alarm
Conditions
• 1.2 V & 3.3 V Power Supply Requirements
• Less than 450 mW Typical Power Dissipation
S4886
DeMux/
FPGA
Optical
Transceiver
Mux/
FPGA
22 AppliedMicro Product Selector Guide
Framers/Mappers
S19225 VOLTA-192
S19227 RUBICON-LH
S19262 TIPI-RUBICON
S19231 RUBICON-METRO
S19258 PEMAQUID
S19263 PEMAQUID-LW
S4809
S4815
S10123
S10124
S10126
S10130
DRAVA
RUBICON-48
YAHARA
YAHARA
YAHARA
URAL
Framers/Mappers
Framers/Mappers Selection Matrix
Device
Name
Description
Power Supply
Power
Package,
size [mm²]
S19225
VOLTA-192
10XGbE/Fibre Channel/Escon/DVB to SONET/SDH MAPPER
1.2 V/2.5 V
8.5 W (Max)
CMOS .13um,
1023 CBGA
S19227
RUBICON-LH
OC-192/48/12/3 DW/FEC/PM and ASYNC Mapper Device
with EFEC
1.2 V/2.5 V
4.3 W (Max)
CMOS .13um, 624
PBGA (1.27mm pitch)
S19262
TIPI-RUBICON
OC-192/48/12/3 DW/FEC/PM and ASYNC Mapper Device
with EFEC
1.2 V/2.5 V
4.3 W (Max)
CMOS .13um, 676
PBGA (1.00mm pitch)
S19231
RUBICON-METRO
OC-192/48/12/3 DW/FEC/PM and ASYNC Mapper Device
with EFEC
1.2 V/2.5 V
4.1 W (Max)
CMOS .13um,
624 PBGA
S19258
PEMAQUID
10G LAN/WAN/OTN Framer/Mapper/Phy with FEC/EFEC
1.2 V/1.8 V/2.5 V
2.4-3.5 W (Typ)
CMOS, .13um,
324 PBGA
S19263
PEMAQUID-LW
10G LAN/WAN Framer/Mapper/Phy (Industrial Temp)
1.2 V/1.8 V/2.5 V
2.4-2.9 W (Typ)
CMOS, .13um,
324 PBGA
S4809
DRAVA
SONET/SDH OC-48/8 x OC-12/16 x OC-3 Frame/PP with
Integrated OC-3/12/48
3.3 V/1.2 V
2-3 W (Typ)
4.5 W (Max)
CMOS .13um,
783 PBGA
SONET/SDH Jitter Compliant Phys
S4814
VOLTA-48
10xGbE/Fibre Channel/Escon/DVB to SONET/SDH mapper
1.2 V/2.5 V
7.5 W (Max)
CMOS .13um,
1023 CBGA
S4815
RUBICON-48
OC-48/12/3 DW/FEC/PM and ASYNC Mapper Device
with EFEC
1.2 V/2.5 V
1.95 W (Max)
CMOS .13um,
624 PBGA
S10123
YAHARA
10G Multi-Service Framer/Mapper/PHY with FEC/EFEC
1.2 V/1.8 V/2.5 V
1.93 - 3.05 W (Typ)
CMOS .13um,
324 BGA
S10124
YAHARA
10G Multi-Service Framer/Mapper/PHY with FEC/EFEC
1.2 V/1.8 V/2.5 V
3.28 - 4.31 W (Typ)
CMOS .13um,
576 BGA
S10126
YAHARA
10G Multi-Service Framer/Mapper/PHY with FEC/EFEC
1.2 V/1.8 V/2.5 V
2.65 - 3.40 W (Typ)
CMOS .13um,
324 BGA
S10130
URAL
10G OTN G.975. I.7 Ultra FEC Coprocessor
1.2 V/2.5 V
1.75 W (Typ)
CMOS .13um,
324 BGA
24 AppliedMicro Product Selector Guide
S19225 VOLTA-192 10 Port LAN/SAN
Multi-Protocol VC Mapper over OC-192
Features
• 10 client ports, provisionable on per-port basis for GbE,
1x/2x FC, FICON, ESCON, or DVB
• Built-in client interface CDRs that operate between
200 Mbps and 2.125 Gbps to allow direct connection
of low-cost, pluggable SFP optics modules
• Line Interface: SFI-4 (OC-192/STM-64)
• Includes PCS and performs 8B/10B Performance Monitoring
for all supported protocols
• Transparent GFP processing for all client protocols using
64B/65B encoding on a per-port basis
• GFP-encapsulation using virtual, contiguous or arbitrary
concatenation
Framers/
Mappers
• Mapping of Ethernet in up to 10-payload tributaries using
POS/HDLC, ITU-T X.86 and PPP/BCM
• Supports LAP-S or GFP framing
• CMOS .13um, 1023 CBGA
• Power—8.5 W (Max); 1.2 V/2.5 V
• Production Released
Applications
• Multi-Service Provisioning Platforms and Metro Access
platforms built around a SONET/SDH STS/VC crossconnect.
• Metro DWDM and MSTP systems, where Volta can be used
in transponder cards or tributary cards
• Each port integrates a full IEEE 802.3z Ethernet MAC
and supports extensive RMON statistics
Volta 192
1
10
Client
Line
Prot Port
GbE, DVB,
ESCON,
FICON,
1x/2xFC
Volta 192
1
10
Client
Line
STS-1
Switch
Prot Port
MSPP 20G Data Line Card
Transport Products
25
S19227 RUBICON-LH/S19262 TIPI-RUBICON 10G
Multi-Rate G/EFEC Framer with 10GE Mapping
Framers/
Mappers
Features
• DispersionXX circuitry enabled w/ S3394
• G.709 compliant full duplex FEC device w/EFEC
• S19227 RUBICON-LH: CMOS .13um, 624-pin PBGA
with 1.27mm pitch
• OC-192/OC-48/OC-12/OC-3 and STM-64/STM-16/STM-4/
STM-1, 8B/10B, and 10GEMAC PMON
• Supports G.709 synchronous and asynchronous mapping
and demapping
• Unique dual ENDEC design allows
for maximum flexibility in the emerging G.709 network
• S19262 TIPI-RUBICON: CMOS .13um, 676-pin PBGA
with 1.00mm pitch
• Power—4.3 W (Max); 1.2 V/2.5 V
• Production Released
• All ENDEC’s can be bypassed for pure PMON mode
Applications
• EFEC code measured to 8.6db NECG at 1x10-15
• SONET/SDH OC-48/STM-16 OC-192/STM-64 DWDM
and MSTP transport systems and metro networks
• Passive 64b/66b PMON for 10GFC support
• 10GELAN Xport enabled w/ client “throttle back” for “right
sized” 10GELAN transport in G.709 network
• 5 distinct methods of 10GE mapping capabilities including
GFP support
• Transparent Add-Drop Multiplexing Transponder
• Protocol Transparent Transport
• IaDI to IrDI FEC transponder chip (6.2dB gain network
to >8dB gain network)
OC-192,
STM-64,
10GE
LINE
Interface
1xOTU-2
300 Pin
MSA
Module
Rubicon-LH/
Tipi-Rubicon
S19252
Tx only
LH Optics
S3394
DispersionXX
LH Chipset
DWDM and MSTP 10G Extended Transport Card with DispersionXX
26 AppliedMicro Product Selector Guide
S19231 RUBICON-METRO 10G Multi-Rate
GFEC Framer with 10GE Mapping
Framers/
Mappers
Features
Applications
• G.709 compliant full duplex FEC device w/GFEC
• SONET/SDH OC-48/STM-16 OC-192/STM-64 DWDM
transport systems and DWDM metro networks
• OC-192/OC-48/OC-12/OC-3 and STM-64/STM-16/STM-4/
STM-1, 8B/10B, and 10GEMAC PMON
• Supports G.709 synchronous and asynchronous mapping
and demapping
• Transparent Add-Drop Multiplexing Transponder applications
• Protocol Transparent Transport
• Mid-span G.709 GFEC transponder repeater applications
• Unique dual ENDEC design allows for maximum flexibility
in the emerging G.709 network
• All ENDEC’s can be bypassed for pure PMON mode
• GFEC code measured to 6.2db NECG at 1x10-15
• Passive 64b/66b PMON for 10GFC support
• 10GELAN transport enabled with client “throttle back” for
“right sized” 10GELAN transport in G.709 network
• 5 distinct methods of 10GE mapping capabilities including
GFP support
• CMOS .13um, 624 PBGA
• Power—4.1 W (Max); 1.2 V/2.5 V
• Production Released
GbE, DVB,
FICON,
ESCON,
1x/2xFC
1xOTU-2
1
10
Volta
192
Rubicon
Metro
S19237 &
S19250 or
S19252
Optical
Module
MSTP 10G Extended Transport Card for LAN/SAN Clients
Transport Products
27
S19258 PEMAQUID 10G LAN/WAN/OTN
Framer/Mapper/Phy with FEC/EFEC
Framers/
Mappers
Features
Applications
• Line side supports:
• Small/Medium/Large MSPPs (ADMs)
– XFI interface for serial 10G XFP, SFP+ apps.
• Digital Cross-Connect Systems
– OTU-2/ODU-2 signal or a 10GE Serial WAN (WIS) / LAN / FC
• Optical Cross- Connect Systems
– G.709 FEC or EFEC encoding/decoding
• DWDM Transport Equipment
– OTN & SONET/SDH Monitoring & Drop/Insert
• System interfaces supports a XAUI interface
• Regenerators—OC-12/OC-48
and STM-16/TM-1
– Provisionable ODU-2 over XAUI mode
• Muxponders
• Seven (7) data mapping modes over OTN or WAN, including
a LAN pass thru mode.
• 10GE MAC in both the TX/RX directions
• On-chip Continuous Rate CDR enabling the need for only
one Refclock for 10GE, 10GEwFEC, SONET/SDH, SONET/
SDH w FEC
• Supports Industrial Temp Range (-40ºC to 85ºC)
• Product Specifications
– CMOS .13um, 19mm x 19mm PBGA , 324 pins
– Power—2.4-3.5 W—Typ; Supplies: 2.5 V/1.8 V/1.2 V
LINE
1 x 10GE-LAN/WAN
(Up to 160km)
10G
XFP
Module
PEMAQUID-LW
10G MAC/PCS/
PHY I-Temp
Serial 10G XFI
XAUI
10G nP
or
MAC
Ethernet
Switch
Fabric
Ethernet Based Uplink Switch Card
LINE
1 x OTU-2
(Up to 160km)
300 Pin
MSA
Module
S19250
XFI
Ethernet Based Uplink Switch Card
28 AppliedMicro Product Selector Guide
PEMAQUID
10G MAC/PCS
with GFEC/EFEC
XAUI
S19263 PEMAQUID-LW 10G LAN/WAN
Framer/Mapper/Phy (Industrial Temp)
Framers/
Mappers
Features
Applications
• Line side supports:
• Industrial Environments
– XFI interface for Serial 10G XFP, SFP+ apps
• Metro-Ethernet Switch/Routers
– 10GE Serial WAN (WIS)/LAN/FC.
• DWDM systems
– SONET/SDH Monitoring & Drop/Insert
• 10GbE LAN Metro-Ethernet networks
• System interfaces supports a XAUI interface
• 10GbE over WAN and OTN
• Supports LAN pass thru mode and LAN to WIS mapping mode
• 10GE MAC in both the TX/RX directions
• On-chip Continuous Rate CDR enabling the need for only
one Refclock for 10GE and SONET/SDH
• Supports Industrial Temp Range (-40ºC to 85ºC)
• Product Specifications
– CMOS .13um, 19mm x 19mm PBGA, 324 pins
– Power: 2.4-2.9 W—Typ; Supplies: 2.5 V/1.8 V/1.2 V
LINE
1 x 10GE-LAN/WAN
(Up to 160km)
10G
XFP
Module
PEMAQUID-LW
10G MAC/PCS/
PHY I-Temp
Serial 10G XFI
XAUI
10G nP
or
MAC
Ethernet
Switch
Fabric
Ethernet Based Uplink Switch Card
LINE
1 x OTU-2
(Up to 160km)
300 Pin
MSA
Module
S19250
XFI
PEMAQUID
10G MAC/PCS
with GFEC/EFEC
XAUI
Ethernet Based Uplink Switch Card
Transport Products
29
S4809 DRAVA 5G Bidirectional
Framer/Pointer Processor w/STS XC
Framers/
Mappers
Features
Applications
• Client side supports 16 channels of Dual-Rate/Any Input,
SONET/SDH compliant OC-12/OC-3 and STM-4/STM-1
serial interfaces
• Small/Medium/Large MSPPs (ADMs)
• Line (Client) side supports 1 x OC-48/OC-12 or 1 x STM-4/
STM-1 Dual Rate SONET/SDH serial interface
• 5G/2.5G of Unidirectional/Bidirectional Pointer processing
support for STS-48c/24c/21c/18c/15c/12c/9c/6c/3c/1
and (SDH equivalent) signals.
• Digital Cross-Connect Systems
• Optical Cross- Connect Systems
• DWDM Transport Equipment
• Regenerators—OC-12/OC-48
and STM-16/TM-1
• Muxponders
• UPSR and BLSR Ring Support
• Redundant System ports (4 x 2.5G/622M (TFI-5))
• 384 x 384 STS-1 TSI, with 4 configuration memories
• In-band signaling & HW assisted switching support
• Supports Pass-Thru TOH Transparency and Programmable/
Generic mapping of TOH bytes.
• Client and Line Interfaces support TOH/POH Monitoring
and Drop/Inserts
• CMOS .13um, 783 PBGA (31mm x 31mm)
• Power—2-3 W (Typ), 4.5W (Max); 3.3 V/1.2 V
• Development Release—July, 2006
4 x TFI-5
16xOC-3/
8xOC-12
or
16xSTM-1/
8xSTM-4
Client
1xOC-48/12
or
1xSTM-16/4
Line
(Client)
DRAVA
Sys
Client TDM Card for a Metro-MSPP
30 AppliedMicro Product Selector Guide
STS-1
Switch
S4815 RUBICON-48 2.5G Multi-Rate
G/EFEC Framer
Framers/
Mappers
Features
Applications
• G.709 compliant full duplex FEC device w/EFEC
• SONET/SDH OC-48/STM-16 DWDM and MSTP transport
systems and metro networks
• Similar chip architecture to Niagara (same register maps
for same functions)
• Transparent Add-Drop Multiplexing Transponder applications
• OC-48/OC-12/OC-3 and STM-16/STM-4/STM-1
and 8B/10B PMON
• Protocol Transparent Transport
• IaDI to IrDI FEC transponder chip (6.2dB gain network to
8.6dB gain network)
• Supports G.709 synchronous and asynchronous
mapping and demapping
• Unique dual ENDEC design allows for maximum flexibility
in emerging G.709 network
• All ENDEC’s can be bypassed for pure PMON mode
• EFEC code measured to 8.6db NECG at 1x10-15
• SFI-4 P1 interfaces on both ports of chip
• Both interfaces specified up to 2.7 GHz
• Client side interface low end spec to 125 MHz
• Unique design targeted to “Anyrate” OC48 and below
• CMOS .13um, 624 PBGA
• Power—1.95 W (Max); 1.2 V/2.5 V
• Production Released
OC3/OC12
16 lanes
S1212
x4
Danube
Rubicon
48
S3485
1xOTU1
2.7GHz
MSTP 2.5G Extended Transport Card for TDM Clients
Transport Products
31
S10123/S10124/S10126 YAHARA 10G MultiService Framer/Mapper/Phy with FEC/EFEC
Features
Product Specifications
• Supports 10GBase-R/10GBase-W, OC-192/STM64, 8G/10G
FC, OTU-2 (Standard and Overclocked) Client Signals
• Package: Three Options
• Extensive Client Mapping Solutions into WIS and OTU-2
Line signals, including Sychronous/Aynchronous,
Bit Transparency, GFP-T/GFP-F, and WIS
• Optical Line / Client Interfaces
– Two 10G Serial Interfaces glue-lessly interface to pluggable
XFP/SFP+
– Supporting specific Line/Client baud rates from 8.5Gb/s
to 11.32Gb/s
– Integrated EDC technology for SFP+ ER/ZR application
– SFI4.1 (16 x 622Mb/s to 701 Mb/s) Interface Glue-less
Interface to 300-pin MSA modules
• Backplane Interface
– XAUI (3.125Gb/s or 3.1875Gb/s)
– SFI4.2 (2.19Gb/s to 2.94Gb/s)
– SFI-5s (2.125Gb/s to 2.85Gb/s)
• Fully Compliant to IEEE802.3-2005, ITU G.709,
and XFP4.0 Standards
• On-Chip Fractional Clock Management Unit - only one
reference clock required to generate all line rates for
Metro/Carrier Ethernet Applications
Framers/
Mappers
– S10123: 324 pin FC-BGA (Flip Chip Ball Grid Array),
19mm x 19mm
– S10124: 576 pin FC-BGA, 25mm x 25mm
– S10126: 324 pin FC-BGA (Flip Chip Ball Grid Array),
19mm x 19mm
• Power supply Voltages: 1.2 V Core, 2.5 V CMOS I/O
(3.3 V tolerant) and 1.8 V for Analog I/O macros
• Power dissipation:
– S10123: 1.93 - 3.05 Watts (Typical)
– S10124: 3.28 - 4.31 Watts (Typical)
– S10126: 2.65 - 3.40 Watts (Typical)
Applications
• Super-Framer/Mapper/Phy for LAN, WAN and OTN
platforms and networks
• DWDM Equipment, Packet Optical Transport Systems (POTS),
Multi-Service Transport Platforms (MSTPs), Switch/Routers
• Single chip 10G Transponder Applications
• 10GbE/OC-192 MSTP client tributary and line cards
• 10G “AnyRate” OTN Line Card Applications
• 10GbE and fibre channel mapping modes support
both fixed and non-fixed stuff bytes
• 10GbE IEEE802.ae-ER/ZR uplink line card for enterprise
switch applications
• OTN and TOH line overhead drop/insert support
• OTU2 DWDM Client tributary/Line cards
• Full OTN and SONET/SDH (WIS compliant) overhead
monitoring
• 10x10G to 100G Muxponder Application
• On-Chip 10GbE MAC for 10GbE overhead status monitoring
• 16-bit, 66 MHz microprocessor interface for control and
status monitoring
• Integrated Optical Module 2-wire control Interface
for XFP/SFP+ (compatible with I2C)
• Supports Industrial Temp Range (-40C to 85C)
32 AppliedMicro Product Selector Guide
• 4x10G to 40G Muxponder Application
S10123/S10124/S10126 YAHARA 10G MultiService Framer/Mapper/Phy with FEC/EFEC
10G MAC/NP
or
10GbE Switch
or
SONET/SDH
or
8G/10G FC
OTU-2-e,f
Yahara
(S10123)
4
XAUI /
SFI4.P2
Framers/
Mappers
GFEC
EFEC
or
10GbE
8G/10G FC
OC-192/STM-64
XFP
19mmx19mm
pkg
S10123 supports one 10G Serial Interface and the backplane interfaces XAUI/SFI4.2/SFI-5s
LINE
XFI
CLIENT
10GE
8GFC / 10GFC
OC-192
OTU-2-GFEC
Yahara
(S10124)
155.52
XFP MHz
25mmx25mm
pkg
or
SFI4.1
System
Interface
OTU-2-e,f
GFEC
EFEC
MSA
300PIN
16
4
OTU-2-e,f
GFEC
EFEC
XFP
or
16
SFI4.1
S19252
XFP
OTU-2-e,f
GFEC
EFEC
(Working/Protection)
S10124 supports two 10G Serial Interface and the backplane interfaces XAUI/SFI4.2/SFI-5s
XFP
XFP
OTN
OTU-2-e,f
GFEC
XFP
XFP
WAN
OC-192/STM-64
XFP
XFP
LAN/WAN
10GbE
8G/10GFC
XFP
10
XFI
Yahara
(S10126)
19mmx19mm
pkg
XFP
XFI
x10
100G
FEC/
FRAMER
OTN
GFEC/EFEC
LAN/WAN
10GbE
8G/10G FC
OC-192/STM-64
XFP
XFP
S10126 supports two 10G Serial Interface
Transport Products
33
S10130 URAL 10G G.975.1 I.7
Ultra FEC Coprocessor
Framers/
Mappers
Features
Applications
• ITU G.975.1 I.7 UFEC Encoder/decoder
• Yahara or Rubicon Companion for applications Requiring
UltraFEC Compatibility
• Decodes and Maintain statistics for UFEC
• Fully Interoperable with G.975.1 I.7 Deployed Interfaces
• Standard and overclocked OTU2 rate
• DWDM Equipment, Packet Optical Transport
Systems (POTS)
• Multi-Service Transport Platforms (MSTPs), Switch/Routers
• SFI4.1 to SFI4.1 Operations, SFI4.2 to SFI4.1 A
and SFI4.1 B Operations or Yahara Coprocessor
Operations via SFI4.2 to SFI4.1 interfaces.
• Single Vendor chip-set for 10G Transponder Applications
• Flexible Clock Configuration
• 16-bit, 66 MHz microprocessor interface
for control and status monitoring
• Supports Industrial Temp Range (-40C to 85C)
Product Specifications
• Package:
– S10130: 324 pin FC-BGA (Flip Chip
Ball Grid Array), 19mm x 19 mm
• Power supply Voltages: 1.2 V Core,
2.5 V CMOS I/O (3.3 V tolerant)
OTN
OTU-2,e,f
GFEC/EFEC
WAN
OC-192/STM-64
RUBICON
16
URAL
SFI4.1
16
SFI4.1
OTN
300pin
MSA
LAN/WAN
GFEC
EFEC
UFEC
NO-FEC
10GbE
8G/10GFC
• Power dissipation:
– S10130: Under 1.75 Watts (Typical)
OTN
OTU-2,e,f
GFEC/EFEC
WAN
OC-192/STM-64
YAHARA
4
URAL
SFI4.2
16
SFI4.1
OTN
300pin
MSA
LAN/WAN
GFEC
EFEC
UFEC
NO-FEC
10GbE
8G/10GFC
OTN
OTN
XFI
OTU-22,e,f
GFEC/EFEC
WAN
OC-192/STM-64
LAN/WAN
10GbE
8G/10GFC
34 AppliedMicro Product Selector Guide
YAHARA
4
SFI4.2
16
SFI4.1
URAL
XFP/SFP+
GFEC
EFEC
UFEC
NO-FEC
Switch Fabrics
PRS 5G/C48X
PRS 20G/C192X
PRS Q-80G
Switch Fabrics
Switch Fabric Selection Matrix
Product
# of
Devices
Aggregate
switching
capacity
OC-48/2.5Gbps
NP/TMs
OC-192/10Gbps
NP/TMs
Typical power@
100% Traffic Load
Serial link type and
speed (links per port
per plane)
PRS 5G/C48X
Switch Fabric Device
2 to 8
5 to 40 Gbps
2 to 8
N/A
6.2 Watts
HSS @ 3.2 Gbps (2)
PRS 20G/C192X
Switch Fabric Device
1 to 8
20 to 160 Gbps
4 to 8
1, 2, or 3 to 8
(mesh)
9 Watts
HSS @ 3.2 Gbps (2 or 8)
PRS Q-80G Switch
Device
2 or 4 or 8
160, 320, or 640
Gbps
32, 64, or 128
8, 16, or 32
14.2 Watts (master)
16.9 Watts (slave)
14.7 Watts (last slave)
HSS @ 3.2 Gbps (32)
L = Leaded; R = RoHS Compliant
1
36 AppliedMicro Product Selector Guide
Switch
Fabrics
PRS 5G/C48X Switch Fabric Device
Features
Applications
• Multi-purpose device operating as a switch and fabric
interface (see PRS C48X, and PRS C192X Fabric
Interface Devices)
• Switch/Routers
• Multi-services provisioning platforms
• Converged platforms (voice, video and data)
• 2.5 Gbps of full-duplex user bandwidth for 5-20 Gbps
systems with an overspeed factor of 2
• Access concentrators
• Enables the design of systems of up to eight payload boards
linked in a meshed topology (no central switch)
• Media gateways, SGSN
• CSIX-L1 or PL3-based interface for 2.5-Gbps/OC-48
protocol engines
• Fabric Computing
• Audio and video distribution
• Class Director Switches
• 899 FC-PBGA Package, 31mm x 31mm
• Network Appliances
• Storage Virtualization
12345678
12345678
12345678
12345678
12345678
12345678
12345678
12345678
C48X
1
C48X
2
C48X
3
C48X
4
C48X
5
C48X
6
C192X
7
C192X
8
2.5G
Protocol
Engine
2.5G
Protocol
Engine
2.5G
Protocol
Engine
2.5G
Protocol
Engine
2.5G
Protocol
Engine
2.5G
Protocol
Engine
10G
Protocol
Engine
10G
Protocol
Engine
PHY
PHY
PHY
PHY
PHY
PHY
PHY
PHY
Transport Products
37
Switch
Fabrics
PRS 20G/C192X Switch Fabric Device
Features
Applications
• Multi-purpose device operating as a switch and fabric
interface (see PRS C48X, and PRS C192X Fabric
Interface Devices)
• Switch/Routers
• Multi-services provisioning platforms
• 10 Gbps of full-duplex user bandwidth for 10 Gbps (one
device) or 20 Gbps (two back-to-back devices) systems with
an overspeed factor of 2
• Converged platforms (voice, video and data)
• Access concentrators
• Media gateways, SGSN
• Up to 80-Gbps systems: three to eight PRS 20G-based
payload boards in a meshed topology, with backplane
bandwidth between two boards of 5 Gbps (2.5-Gbps user
bandwidth x overspeed of 2). Maximum media bandwidth
(10 Gbps) is achieved with traffic distributed over different boards
• Audio and video distribution
• CSIX-L1 interface for a 10-Gbps/OC-192 network
processor or, in single or back-to-back PRS 20G
configuration, 4 x CSIX-L1 or PL3-based interfaces
for 2.5-Gbps/OC-48 network processors
• Storage Virtualization
• Fabric Computing
• Class Director Switches
• Network Appliances
• 937 CBGA Package, 32.5mm x 32.5mm
38 AppliedMicro Product Selector Guide
12345678
12345678
12345678
12345678
12345678
12345678
12345678
12345678
C48X
1
C48X
2
C48X
3
C48X
4
C48X
5
C48X
6
C192X
7
C192X
8
2.5G
Protocol
Engine
2.5G
Protocol
Engine
2.5G
Protocol
Engine
2.5G
Protocol
Engine
2.5G
Protocol
Engine
2.5G
Protocol
Engine
10G
Protocol
Engine
10G
Protocol
Engine
PHY
PHY
PHY
PHY
PHY
PHY
PHY
PHY
Switch
Fabrics
PRS Q-80G Switch Device
Features
Applications
• Scalable switch fabric for applications of up to 320 Gbps
and port speeds of up to 10 Gbps/OC-192c
• Switch/Routers
• Connectivity of eight input ports and eight output ports
(two PRS Q-80G devices), 16 input ports and 16 output
ports (four devices), or 32 input ports and 32 output ports
(eight devices)
• Systems up to 80 Gbps (two PRS Q-80G devices), 160 Gbps
(four devices) or 320 Gbps (eight devices) of full-duplex
aggregate user bandwidth
• Multi-services provisioning
platforms
• Converged platforms
(voice, video and data)
• Access concentrators
• Media gateways, SGSN
• Audio and video distribution
– Providing a 2x over-speed factor
• Fabric Computing
• One OC-192c/10-Gbps NP/TM or up to four OC-48c/
2.5-Gbps NP/TM attachments per port
• Class Director Switches
• Quality of Service (QoS) with four levels of traffic priority
and programmable flow control thresholds, full bandwidth
multicast and broadcast (replication at sending), and cell
lossless switchover capability
• Industry standard CSIX-L1 and PL3-based
interfaces to NP/TMs via PRS C48X and
PRS C192X fabric interface devices
• Network Appliances
• Storage Virtualization
Line Cards
8 HSS Links
• 624 CBGA Package, 32.5mm x 32.5mm
Active
Switch
1
0
PHY
10G / OC-192
NP / TM
C192X
8 HSS Links
1
0
x
PRS Q-80G
Switch
Control
Switch
Control
PHY
2.5G/OC-48
NP/TM
(nP37xx)
PHY
2.5G/OC-48
NP/TM
(nP37xx)
PHY
2.5G/OC-48
NP/TM
(nP37xx)
PHY
2.5G/OC-48
NP/TM
(nP37xx)
C192X
8 HSS Links
1
0
8 HSS Links
1
0
x
PRS Q-80G
Protection
Switch
Switch Core (NxN)
Switch Fabric
Transport Products
39
For technical questions regarding AppliedMicro’s
products, please contact our product support group at
1.800.840.6055 or email support@appliedmicro.com.
215 Moffett Park Drive
Sunnyvale, CA 94089
www.appliedmicro.com
408.542.8600
AppliedMicro reserves the right to make changes to its products, its datasheets, or related documentation, without notice and warrants its products solely pursuant to its terms and conditions of sale, only to substantially comply with the
latest available datasheet. Please consult AppliedMicro’s Term and Conditions of Sale for its warranties and other terms, conditions and limitations. AppliedMicro may discontinue any semiconductor product or service without notice, and
advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information is current. AppliedMicro does not assume any liability arising out of the application or use of any product or
circuit described herein, neither does it convey any license under its patent rights nor the rights of others. AppliedMicro reserves the right to ship devices of higher grade in place of those of lower grade.
APPLIEDMICRO SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS.
AppliedMicro is a registered trademark of Applied Micro Circuits Corporation. © 2010 Applied Micro Circuits Corporation.
Transport PSG_Rev 1 032010