Supplement to
TANDEM
TANDEM locking device
Product
4026.05.06
Description
Application
■
Vertical mount to minimize sub-front
splitting
■
Designed for 1/2" drawer bottom
recess
■
For use in all standard applications
■
For drawer sub-front thicknesses of
16 (5/8") to 19 (3/4")
■
For use with all TANDEM runners
Left
T51.1700.20 L
Right
T51.1700.20 R
Installation
Offset screw holes
Attachment
606 N or 606 P
Screws or any #6
flat head wood screws
at least 5/8" long
The mounting screw holes are offset
1 mm from each other to minimize
the splitting of drawer sub-front.
NOTE: Pre-boring is recommended using Blum's VPB-5 Vix bit
Adjustment
Drawer installation and removal
Installation
Height
Removal
2
1
Place drawer on runners and close.
Locking devices automatically
connect to runners.
Dimensions in millimeters (inch equivalents as noted)
Subject to technical modifications without notice. © 2007 1.Squeeze orange handles on
locking devices.
2. Pull drawer out and up.
Printed in the USA
LIT.4055.04.07
2
1
1.Press up on adjustment tab.
2. Push towards back of drawer.
Max. 3mm (1/8") raise the drawer.