FSH locking
Electromechanical Security
new generation electric and electronic locking
FSH MISSION
FSH Fire & Security Hardware, is an Australian
owned company who pride in and strive to
maintain their leading position in the Australian
electromechanical security locking market.
FSH recognises and acknowledges the relationships with their
Distribution Partners to which FSH endeavours at all time to
provide competitively priced high quality solutions to
most if not all electromechanical security locking solutions.
FSH is cognisant of the growing support of Consultants and
Advisors in the Security Industry who are now specifying FSH
devices as their product of preference.
FSH also acknowledge our End Users who demand Quality,
Service and Expert Support and who recognise this in their
growing demand for the FSH product lines.
FSH commits to continue with its leadership in innovation of
Security Locking Devices: To maintain its reputation as the
leading producer of high quality locking products: and to
maintain its aggressive price competitiveness.
FSH - a proud Australian Owned Company.
FSH HEADQUARTERS | MATRAVILLE NSW
FSH State-of-the-Art testing equipment
new generation electric and electronic locking
international markets
Our range of Electric Locking Devices have been installed in countless projects throughout the world.
As a reference we list below just a few of the diverse buildings and complexes fitted out with them.
Universities
USA Baylor College of Medicine
Hospitals
Australia Sydney St George Hospital
Other Buildings
China Beijing TV Station
Boston University Medical Centre
Peter McAlum Anti Cancer Centre
Beijing Shaite Hotel
Florida Int’l University Data Centre
Sydney North Shore Hospital
Beijing Modern Times City
Vanderbilt University
Sydney Adventist Hospital
China Shanghai Fudan University
Shenzhen University
St Vincent Hospital
USA Atlantic City Medical Centre
Canada Dalhousie University
Belgium Brussels Freedom University
UCL Medical Science University
Britain Cambridge University
Netherlands Amsterdam University
Norway Oslo University
Spain Madrid University
Australia Australian National University A.C.T
University of New South Wales
Government Building
China National Dept. of Public Information
China Bureau of Customs
The Second Intermediate People’s
Court of Shanghai
The People’s Court in Chengdu
Shanghai Futures Market Building
Canada Mirimichi Court House
Calgary City Police Headquarters
Belgium CEE Chamber Headquarter
European Parliament
Airports
Public Bulidings
China China Telecom
China Internet
Zhengdan Building in Shanghai
China Unicom
Bund Centre Building in Shanghai
Shanghai Museum
Shanghai Stock Exchange Tower
Shanghai Mint
Jinan Mail
Ningxia Electric Power Station
Xingjiang Electric Power Station
Qingshan Nuclear Power Station
in Zhejiang
France Olympic Stadium
Second Stadium
Australia Olympic Game Main Assembly Hall
Sydney Nuclear Facility
Britain Manchester City Football Stadium
Spain Barcelona World Expo
Germany Bosch
Canada Bell Canada
Banks
China Beijing People’s Bank
Beijing Bank of Communication
Australia Sydney International Airport
Branch
Britain London Stansted Airport
Norway Oslo Airport
Spain Madrid Airport
China Shenzhen Bao An Airport
Investment Building in Sichuan
France HLM
KDI
Air France
Finland Fin Air
Aritech Company
Oy Aysec Company
USA Ericsson Mobile Headquarters
Chevron Headquarters
BMC Software Headquarters
Germany Mannesmann Group
ESCO
Sweden Forster Jansen
Spain Sentinel Group Rialto
Banco Santander
Import and Export Bank - Shenzhen
Canada Calgary International Airport
Commercial Buildings
China Shanghai Pudong Jinmao Tower
China Mobile
Belgium Brussels International Airport
Netherlands Schiphol International Airport
Sydney David Jones Business Centre
Sydney Seven Eleven Chains Store
Australia Department of Defence A.C.T
Department of Finance & Treasury
Zhejiang Lvcheng Villa’s
Australia Sydney Star City Casino
The Second intermediate People’s
Belgium Fortis Bank
BBL Bank
USA Commerce Bank
Netherlands Amro Bank
Australia National Bank Headquarters
Netherlands Philips Headquarters
Interlogix Group
Britain Tyco Electronics
Norway Detection System
Australia Grosvenor Place Sydney
Zenith Centre
Rialto Building Melbourne
Singapore Orchard Centre and Hotel
FSH MANUFACTURING | SHANGHAI
new generation electric and electronic locking
APPROVALS
L i f e t i m e wa r r a n t y
c e rt i f i c at i o n
This certificate is to guarantee a lifetime warranty on the
FSH Electromagnetic Lock that you have just purchased.
This warranty does not cover wear and tear of the product
and the product must be installed according to FSH
specifications.
Models covered under this warranty include:
FEM5700 Series|FEM3500 Series|FEM4000HST Series|
FEM2600HST Series
FCCW Series|FEM5000G|FEM4700FS|FEM4500FS
FSH
Fire & Security Hardware Pty. Ltd.
Managing Director
Date: 19th December 2008
EcoLine
be part of a greener future
™
™
™
WALKING GENTLY
ON OUR PLANET
new generation electric and electronic locking
MEM2400 Mechanical Electro Magnetic Lock
Slimline Series - Superior by Performance at Minimal Size
Standard Electro Magnet
600kg holding force
(scaled to size)
MEM FEATURES
•
75% Smaller than a Standard 600kg Magnet
•
High Holding Force up to 1000kg and up to 70kg Side Pressure
•
Dual Voltage 12/24VDC
•
43% Lower Power Consumption than a 600kg Magnet
•
Simple Surface Mount Installation
•
4 Hour Fire Rated
•
Full Monitoring Lock Sensor (LSS) and Door Sensor (DSS)
•
Early Warning Alarm (EW)
mem mechanical electo magnetic lock
1000kg holding force
(scaled to size)
RF15 Battery Operated Keyless Entry For Home & Office
New Generation Electric & Electronic Locking
Mum&Dad...
...& the kids
product FEATURES
•
Wireless Keypad and Remote Control Key-Fob
•
Highly Secure Rolling Code Technology
•
Installed with Standard Mechanical Deadlatch
•
DIY Installation in Minutes
•
Mechanical Key Override (in mechanical lock)
•
Smart Power Management and Low Battery Indicator
FSH product index
Electromechanical Security
11
new generation electric and electronic locking
FSH PRODUCT INDEX
PAGE
No.
MEM MECHANICAL ELECTRO MAGNETIC LOCKS
13
electro magnetic LOCKing deviceS
27
electric strikeS
51
electromechanical drop bolts
67
electromechanical cabinet locks
75
electromagnetic door holders
81
special locking devices
91
MEM mechanical electro magnetic lockS
Electromechanical Security
13
features
part no.
PP
MEM Mechanical Electro Magnetic
Locking Device
MEM2400LP
14
MEM Mechanical Electro Magnetic
Locking Device
mem24000leD-LZ
16
MEM Delayed Egress Locking Device
MEM2400EXT-SERIES
18
MEM Mechanical Electro Magnetic
Sliding Door Locking Device
Flush Mount
MEM1982JM
20
MEM Mechanical Electro Magnetic
Sliding Door Locking Device
Surface Mount
MEM1982JM
-BOX-SSH
22
MEM Mechanical Electro Magnetic
Sliding Door Locking Device
MEM4400
24
14
product MEM2400LP
MEM MECHANICAL ELECTRO MAGNETIC LOCKING DEVICE
FOR OUTWARD OPENING HINGED DOORS
PRODUCT DESCRIPTION
The innovative slimline MEM2400LP Mechanical
Electro Magnetic Lock has been designed as an
alternative to standard magnetic locks especially
suited for situations where door height or narrow
profile door frames create installation restrictions
and appearance is of paramount importance.
The patented MEM incorporates both magnetic
and mechanical design principles to achieve a
superior holding force of up to 1000kg, whilst being
75% smaller than a standard 600kg Electro Magnet.
The MEM2400 is capable of opening with up
to 70kg side pressure on the door and has the
added security function of “Early Warning” alarm
condition. The device comes with the FSH patented
“Anti-Tamper-Bracket” as standard.
MEM2400LP
Technical DETAILS
PART No.
MEM2400LP
light feature
Light Panel (LP)
Function
Surface mount
Outward opening doors
Holding Strength
Up to 1000kg
VOLTAGE/CURRENT
Dual Voltage 12/24VDC 12VDC/240mA 24VDC/120mA
APPROVALS
4 hour fire rated to A.S. and B.S. standards
MONITORING
EW / LSS / DSS
size
MEM size L= 158mm H= 35mm D= 30mm
Armature Plate size L= 120mm H= 30.6mm D= 12.5mm
Anti-Tamper-Bracket size L= 194mm H= 38mm D= 30mm
Product FEATURES
•
Slimline design 75% smaller than a standard 600kg magnet
•
High holding force up to 1000kg and releases under side load of up to 70kg
•
Dual-Voltage 12/24VDC Low power consumption 24VDC/120mA
•
5 year warranty
•
Simple installation
•
4 hour fire rated
•
Full monitoring Lock Status Sensor (LSS) and Door Status Sensor (DSS)
•
Early Warning Alarm (EW)
•
Anti Tamper Bracket (to protect the armature plates fixing bolt)
12 VOLT JUMPER POSITION
(D)
15
Magnet
Door
(B)&(C)
new generation electric and electronic locking
(B)
PART NO. AMGB24-12
(D)
(C)
Product Dimensions and Installation
Installation dimension
Armature Plate & Anti-Tamper
5.5
30.5
120.0
38.0
35.0
12.5
30.0
18.5
158.0
120.0
164.0
194.0
Installation diagram
Door Frame
SPARE
JUMPER
24 VOLT JUMPER POSITION
12 VOLT JUMPER POSITION
(D)
Magnet
Door
(B)&(C)
(B)
PART NO. AMGB24-12
(D)
Installation dimension
accessories
30.5
5.5
MEM2400L Adjustable L-Bracket for Narrow Header Frames
(C)
Armature Plate & Anti-Tamper
120.0
38.0
AMGB24-12 Glass Door Bracket U-Profile
35.0
12.5
30.0
18.5
158.0
120.0
164.0
194.0
Thickness of material = 1.5m/m
Minimum Door Gap 3mm
PART NO. MEM2400L
PART NO. AMGB24-12
16
product MEM2400LED-LZ
MEM MECHANICAL ELECTRO MAGNETIC LOCKING DEVICE
FOR INWARD OPENING HINGED DOORS
PRODUCT DESCRIPTION
The innovative slimline MEM2400LED-LZ Mechanical
Electro Magnetic Lock for inward opening doors
has been designed as an alternative to standard
magnetic locks. The MEM2400LED-LZ comes as a
combination with L&Z-Brackets.
The patented MEM2400LED-LZ incorporates both
magnetic and mechanical design principles to
achieve a superior holding force of up to 1000kg.
The MEM2400LED-LZ is capable of opening with
up to 70kg side pressure on the door.
MEM2400LED-LZ
Technical DETAILS
PART No.
MEM2400LED-LZ
light feature
LED
Function
Surface mount
Inward opening doors including L&Z Bracket
Holding Strength
Up to 1000kg
VOLTAGE/CURRENT
Dual Voltage 12/24VDC 12VDC/350mA 24VDC/175mA
APPROVALS
4 hour fire rated to A.S. and B.S. standards
MONITORING
EW / LSS / DSS
size
MEM size L= 218mm H= 36mm D= 30mm
Armature Plate size L= 174mm H= 30.5mm D= 12.5mm
Product FEATURES
•
Slimline design 75% smaller than a standard 600kg magnet
•
High holding force up to 1000kg and releases under side load of up to 70kg
•
Dual-Voltage 12/24VDC Low power consumption 24VDC/175mA
•
5 year warranty
•
Simple installation
•
4 hour fire rated
•
Full monitoring Lock Status Sensor (LSS) and Door Status Sensor (DSS)
•
Early Warning Alarm (EW)
•
Anti Tamper Bracket (to protect the armature plates fixing bolt)
17
new generation electric and electronic locking
Product Dimensions and Installation
Armature plate
5.5
Bearing sleeve nut
Armature plate
30.5
30.5
5.5
218.0
174.0
5.0
218.0
30.5 30.5
Installation dimension
Installation dimension
174.0
5.0
30.0
50.0
30.0
50.0
Magnet
(B)
(D)
(D)
Magnet
Door Frame
(B)
SPARE
JUMPER
24 VOLT JUMPER POSITION
Door Frame
Door
(C)
12 VOLT JUMPER POSITION
SPARE
JUMPER
24 VOLT JUMPER POSITION
Door
12 VOLT JUMPER POSITION
(A)
(D)
(C)
dome-nut
(A)
(D)
dome-nut
(C)
(C)
(B)
(B)
18
product MEM2400EXT-Series
MEM DELAYED EGRESS LOCKING DEVICE
FOR OUTWARD OPENING HINGED DOORS
PRODUCT DESCRIPTION
The MEM2400EXT Series high security Delayed Egress
Locking Devices are unique products designed
for retail applications and the like, where exit
doors require Egress Delay functions as well as
comprehensive security monitoring.
The MEM2400EXT will open with up to 70kg side
pressure (Pre-Load) on the door. In addition to
Door and Lock Status Sensors, the device is also
equipped with a 2 stage Early Warning alarm
function (EW), Light Panel (LP), a local internal
sounder and optional CCTV camera.
12 Volt PIR motion detector is supplied with the
MEM locking device to monitor movement on the
secure side of the door ensuring the door cannot
be released from the non-secure side (outside).
The device is equipped with the patented
Anti-Tamper plate.
MEM2400EXT-SERIES
Technical DETAILS
PART No.
MEM2400EXTS
MEM2400EXTSC
Function
Surface Mount/Retail Loss Prevention
Mechanical Electro Magnetic Locking Device with
Delayed Egress Feature & Sounder
Surface Mount/Retail Loss Prevention
Mechanical Electro Magnetic Locking
Device with Delayed Egress Feature & Sounder
& built in CCTV Camera
Holding Strength
Up to 1000kg
VOLTAGE/CURRENT
Dual Voltage 12/24VDC 12VDC/280mA 24VDC/140mA
APPROVALS
4 hour fire rated to A.S. and B.S. standards
MONITORING
EW / LSS / DSS
Product FEATURES
•
Delayed Egress function and Early Warning Alarm (EW)
•
Slimline design
•
High holding force up to 1000kg and releases under side load of up to 70kg
•
Dual-voltage 12/24VDC with low power consumption (current@24V/140mA)
•
1 year warranty
•
4 hour fire rated
•
CCTV video function and 365 day security timer function (optional)
•
Full monitoring Lock Status Sensor (LSS) and Door Status Sensor (DSS)
•
Light Panel (LP)
•
Supplied with PIR Motion Detector and Anti-Tamper plate
19
new generation electric and electronic locking
Product Dimensions and Installation
35mm
158mm
35mm
60mm
functional details
Activation of the Early
Warning alarm and
Delayed Egress function
The Early Warning alarm functions
(EW) are both, local and remote
alarm indications to detect, deter
and record unauthorised exit
attempts. The Early Warning alarm
operates in two stages.
Stage 1
Stage 2
Triggered on initial pressure being
applied to the particular door fitted
with the device in the form of a local
audible and/or remote alarm. The
initial pressure to the door is called
“Nuisance Delay Period” and can
be set from 0 to 3 seconds. After
the Nuisance Delay Period, and if
continuous pressure is applied to
the door, stage 2 is triggered.
Activates both, local and remote
alarm indications. At this time the
device will release the door with
an optional time delay of 0, 15 or
30 seconds. Any incident will be
captured by the local CCTV
camera, if the optional CCTV
version MEM2400EXT-SC is installed.
20
product MEM1982JM
MEM MECHANICAL ELECTRO MAGNETIC SLIDING DOOR LOCKING DEVICE FLUSH MOUNT
PRODUCT DESCRIPTION
The innovative MEM1982 Series Mechanical
Electro Magnetic Sliding Door Lock is the smallest
and strongest sliding door locking solution of its
kind. It has been specifically designed for sliding
door applications where the size of common
electromechanical locking mechanisms create
a problem and compact appearance matters.
The patented MEM incorporates both magnetic
and mechanical design principles to achieve an
exceptional holding force of up to 680kg at this
extraordinary compact size. The MEM1982 Series
sliding door lock also provides full monitoring
LSS, DSS and Early Warning (EW) security alarm
indication. The device accepts voltage of 12VDC
and has low power consumption of 300mA.
MEM1982JM
Technical DETAILS
PART No.
MEM1982JM
Function
Flush Mount Sliding Door
Mechanical Electro Magnetic Lock
Holding Strength
Up to 680kg
VOLTAGE/CURRENT
12VDC/300mA
APPROVALS
4 hour fire rated to A.S. and B.S. standards
MONITORING
EW / LSS / DSS
Product FEATURES
•
Compact design flush mount locking device for sliding doors
•
High holding force up to 680kg
•
Low power consumption 12VDC/300mA
•
Simple installation
•
5 year warranty
•
4 hour fire rated
•
Full monitoring Lock Status Sensor (LSS), Door Status Sensor (DSS)
•
Early Warning Alarm (EW)
22.622.6
22.6
25.625.6
25.6
wire output
94
wire output 104
94
128
104
148
128
148
110
138
110
163
138
178
163
178
Product Dimensions and Installation
12 12
12
21.621.6
21.6
new generation electric and electronic locking
Armature plate andU Bracket
Armature plate andU Bracket
Armature plate
and U Bracket
22.622.6
22.6
25.625.6
25.6
110
138
163
110
178
138
163
178
104
104
128
148
128
148
12 12
12
21.621.6
21.6
94
104
wire output128
94
148
104
128
148
12
12
21.6 21.6
wire output
110.8
70
110.8
70
22.6 22.6
25.6 25.6
MEM Locking Device
Armature plate andU Bracket
Armature plate andU Bracket
Installation diagram
138
163
138
178
163
178
110.8
70
110.8
70
104
138
163
138
178
163
12
12
21.6 21.6
128
148
128
148
22.6 22.6
25.6 25.6
104
178
Installation dimension
MEM Locking device
Armature plate and U Bracket
21
22
product MEM1982JM-BOX-SSH
MEM MECHANICAL ELECTRO MAGNETIC SLIDING DOOR LOCKING DEVICE
SURFACE MOUNT
PRODUCT DESCRIPTION
The innovative MEM1982-BOX-SSH Series
Mechanical Electro Magnetic Sliding Door Lock is
a surface mounted sliding door locking solution.
It has been specifically designed for sliding
door applications where the size of common
electromechanical locking mechanisms create a
problem and compact appearance matters.
The patented device incorporates both magnetic
and mechanical design principles to achieve an
exceptional holding force of up to 680kg at an
extraordinary compact size. The MEM1982BOXSSH sliding door lock also provides full monitoring
LSS, DSS and Early Warning (EW) security alarm
indication. The device accepts voltage of 12VDC
and has low power consumption of 300mA.
MEM1982JM-BOX-SSH
Technical DETAILS
PART No.
MEM1982JM BOX-SSH
Function
Surface Mount Sliding Door
Mechanical Electro Magnetic Lock
including stainless steel box
Holding Strength
Up to 680kg
VOLTAGE/CURRENT
12VDC/300mA
APPROVALS
4 hour fire rated to A.S. and B.S. standards
MONITORING
EW / LSS / DSS
Product FEATURES
•
Compact design locking device for sliding doors
•
High holding force up to 680kg
•
Low power consumption 12VDC/300mA
•
Surface mount installation
•
5 year warranty
•
4 hour fire rated
•
Full monitoring Lock Status Sensor (LSS), Door Status Sensor (DSS)
•
Early Warning Alarm (EW)
23
new generation electric and electronic locking
Product Dimensions and Installation
1
2
3
4
5
Product Dimensions Locking Device
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Product Dimensions Armature Plate Assembly
24
A
A
B
B
C
C
18.
70
6
D
E
204
40
6
D
E
183
F
G
G
10
F
H
H
I
I
40
128
J
J
40
139.
K
K
L
L
M
M
N
N
上海欧一安保器材有限公司
O
P
1
2
3
4
5
6
7
座
8
9
修改内容
10
11
日期
12
修正
13
料号
14
15
17
18
版本
核
19
20
日期
批准
校
材料
16
O
准
数量
号
角
工
MEM1982 SSH
21
22
V1.0
20130709
23
P
24
product application
Surface Mount/ Sliding Doors
Door
Frame/Wall
24
product MEM4400
MEM MECHANICAL ELECTRO MAGNETIC SLIDING DOOR LOCKING DEVICE
PRODUCT DESCRIPTION
The innovative MEM4400 Series Mechanical Electro
Magnetic Lock is a small and extremely strong
sliding door locking solution. It has been specifically
designed for automatic sliding door applications
where the size of common electromechanical
locking mechanisms create installation difficulties.
Located on or within the sliding door track
mechanism the patented MEM incorporates both
magnetic and mechanical design principles to
achieve an exceptional holding force of up to
680kg at an extraordinary compact size.
The MEM4400 Series also provides full monitoring,
LSS, DSS and Early Warning (EW) security alarm
indication. The device accepts voltage of
12-24VDC and has low power consumption
of 260mA@12V.
MEM4400
Technical DETAILS
PART No.
MEM4400
Function
Mechanical Electromagnetic Sliding Door Lock for automatic sliding doors
Holding Strength
680kg
VOLTAGE/CURRENT
Multi Voltage 12-24V (12VDC/260mA)
APPROVALS
4 hour fire rated to A.S. and B.S. standards
MONITORING
DSS / LSS / EW
Product FEATURES
•
Compact design locking device for sliding doors
•
For automatic sliding doors. Lock located on or within the door track
•
Early Warning Alarm (EW)
•
High holding force up to 680kg
•
Low power consumption 12VDC/260mA
•
5 year warranty
•
4 hour fire rated
•
Full monitoring Lock Status Sensor (LSS) and Door Status Sensor (DSS)
25
new generation electric and electronic locking
Product Dimensions and Installation
MEM4400 track mounted on automatic sliding door track
electro magnetic locking devices
Electromechanical Security
27
features
part no.
PP
High Security Power
Saving Electro Magnetic Locking Device
EcoMag™
ECO5700HS
28
Power Saving
Electro Magnetic Locking Device
EcoMag™
ECO5700M
30
Power Saving
Electro Magnetic Locking Device
EcoMag™
ECO3500M
32
High Quality Standard
Electro Magnetic Locking Devices
fem5700 series
34
fem5700d series
fem3500/D
High Quality Standard
Electro Magnetic Loking Devices
fem3500M/DM
36
fem3500fm
Electro Magnetic
High Security Locking Devices
Electro Magnetic
High Security Locking Device
FEM4000HST
38
FEM4000DHST
FEM2600HS
40
fccw15s
High Quality Mini Electro Magnetic
Locking Device
fccw30s
42
fccw30f
Electro Magnetic Shear Locking Device
FSH2500
43
High Quality Weather Resistant Electro
Magnetic Gate Locking Devices
FEM5000G
44
High Quality Weather Resistant Mini
Electro Magnetic Gate Locking Device
fem4700fs-lss
46
fem4500fs-rsw
28
product ECO5700HS
HIGH SECURITY POWER SAVING ELECTRO MAGNETIC LOCKING DEVICE EcoMag™
PRODUCT DESCRIPTION
The patented ECO5700HS model is a high security
power saving Electro-Magnetic Lock with an
individually encoded addressable armature plate.
The lock will only recognize its own armature plate
to prevent the device from being compromised by
false plates.
Under normal, non-alarm conditions, the
ECO5700HS “EcoMag” operates in a low current
`Sleep-Mode’ of 70mA@24V with a holding force of
340kg. In the event of an unauthorised attempt to
open the door, the ECO5700HS “EcoMag” “wakes
up” and goes into an Alarm Mode with full current
of 300mA@24V applied to the device, instantly
increasing the holding force to up to 680kg.
The EcoMag operates on multi voltage 10-26VDC,
provides an Early Warning (EW) signal output, has
a built-in local Alarm Buzzer, with full monitoring of
Lock Status and Door Status, long distance Light
Panel indicator and an Exit Switch Delay function.
ECO5700HS
The device is provided with the FSH patented
Anti-Tamper-Plate as standard.
Technical DETAILS
PART No.
ECO5700HS
Function
Power To Lock (Fail Safe)
Holding Strength
Up to 680kg in “Alarm-Mode”
340kg in “Sleep-Mode”
VOLTAGE/CURRENT
Multi Voltage 10-26VDC
Sleep-Mode: 12VDC=140mA/24VDC=70mA
Alarm-Mode: 12VDC=600mA/24VDC=300mA
MONITORING
Addressable Armature Plate
Door Status Monitoring Sensor (DSS)
Lock Status Monitoring Sensor (LSS)
Early Warning Signial Output and Local Alarm Buzzer (EW)
Exit Switch Delay Function
Long Distance Light Panel (LP)
size
Magnet: L= 268 W= 40 D= 73mm
Armature Plate: L= 209 W= 6.2 D= 66mm
Product FEATURES
•
Truly Green product
•
Door and Lock Status Monitoring Sensor (DSS & LSS)
•
Early Warning signal output and local alarm buzzer (EW)
•
Multi Voltage 10-26VDC low power consumption (70mA@24VDC Sleep-Mode)
•
Exit Switch Delay Function
•
Long distance Light Panel (LP)
•
Addressable armature plate
•
Zero residual magnetism
•
Anti-Tamper-Plate
29
new generation electric and electronic locking
Product Dimensions and Installation
Anti-Tamper Plate
One way security dome nut
30
product ECO5700M
POWER SAVING ELECTRO MAGNETIC LOCKING DEVICE EcoMag™
PRODUCT DESCRIPTION
The patented ECO5700M model is a power saving
Electro-Magnetic Lock.
Under normal, non-alarm conditions, the ECO5700M
“EcoMag” operates in a low current `Sleeping
Mode’ of 70mA@24V with a holding force of 340kg.
In the event of an unauthorised attempt to open
the door, the ECO5700M “EcoMag” “wakes up”
and goes into an Alarm Mode with full current
of 300mA@24V applied to the device, instantly
increasing the holding force to up to 680kg.
The EcoMag operates on multi voltage 10-26VDC,
provides an Early Warning (EW) signal output, has
a built-in local Alarm Buzzer, with full monitoring of
Lock Status and Door Status, long distance Light
Panel indicator and an Exit Switch Delay function.
This device is provided with the FSH patented
Anti-Tamper-Plate as standard.
ECO5700M
Technical DETAILS
PART No.
ECO5700M
Function
Power To Lock (Fail Safe)
Holding Strength
Up to 680kg in ‘Alarm-Mode’
340kg in ‘Sleep-Mode’
VOLTAGE/CURRENT
Multi Voltage 10-26VDC
Sleep-Mode: 12VDC=140mA/24VDC=70mA
Alarm-Mode: 12VDC=600mA/24VDC=300mA
MONITORING
Door Status Monitoring Sensor (DSS)
Lock Status Monitoring Sensor (LSS)
Early Warning Signial Output and Local Alarm Buzzer (EW)
Exit Switch Delay Function
Long Distance Light Panel (LP)
size
Magnet: L= 268 W= 40 D= 73mm
Armature Plate: L= 209 W= 6.2 D= 66mm
Product FEATURES
•
Truly Green product
•
Door and Lock Status Monitoring Sensor (DSS & LSS)
•
Early Warning signal output and local alarm buzzer (EW)
•
Multi Voltage 10-26VDC low power consumption (70mA @ 24VDC Sleep-Mode)
•
Exit Switch Delay Function
•
Long distance Light Panel (LP)
•
Zero residual magnetism
•
Anti-Tamper-Plate
31
new generation electric and electronic locking
Product Dimensions and Installation
Anti-Tamper Plate
One way security dome nut
32
product eco3500M
POWER SAVING ELECTRO MAGNETIC LOCKING DEVICE EcoMag™
PRODUCT DESCRIPTION
The patented ECO3500M model is a power saving
Electro-Magnetic Lock. Under normal, non-alarm
conditions, the ECO3500M “EcoMag” operates
in a low current `Sleeping Mode’ of 60mA@24V
with a holding force of 100kg. In the event of
an unauthorised attempt to open the door, the
ECO3500M “EcoMag” “wakes up” and goes into
an Alarm Mode with full current of 300mA@24V
applied to the device, instantly increasing the
holding force to up to 280kg.
The EcoMag operates on multi Voltage 10-26VDC,
provides an Early Warning (EW) signal output, has
a built-in local Alarm Buzzer, with full monitoring of
Lock Status and Door Status, long distance Light
Panel indicator and an Exit Switch Delay function.
The device comes with the FSH patented
Anti-Tamper-Plate as standard.
ECO3500M
Technical DETAILS
PART No.
ECO3500M
Function
Power To Lock (Fail Safe)
Holding Strength
Up to 280 kg in ‘Alarm-Mode’
100kg in ‘Sleep-Mode’
VOLTAGE/CURRENT
Multi Voltage 10-26VC
Sleep-Mode: 12VDC=120mA / 24VDC=60mA
Alarm-Mode: 12VDC=600mA / 24VDC=300mA
MONITORING
Door Status Monitoring Sensor (DSS)
Lock Status Monitoring Sensor (LSS)
Early Warning Signial Output and Local Alarm Buzzer (EW)
Exit Switch Delay Function
Long Distance Light Panel (LP)
size
Magnet: L=238 W=48 D=24mm
Armature Plate: L=185 W=38 D=12mm
Product FEATURES
•
Truly Green product
•
Door and Lock Status Monitoring Sensor (DSS & LSS)
•
Early Warning signal output and local alarm buzzer (EW)
•
Multi Voltage 10-26VDC low power consumption (60mA@24VDC Sleep-Mode)
•
Exit Switch Delay Function
•
Long distance Light Panel (LP)
•
Anti-Tamper-Plate
33
new generation electric and electronic locking
Product Dimensions and Installation
Anti-Tamper Plate
One way security dome nut
34
product FEM5700 Series
HIGH QUALITY STANDARD ELECTRO MAGNETIC LOCKING DEVICES
SINGLE/DOUBLE DOOR SURFACE MOUNT
PRODUCT DESCRIPTION
The FEM5700 is an unmonitored single magnetic
lock and the FEM5700D is an unmonitored double
magnetic lock with dual 12 or 24 Volt settings.
The FEM5700M is a monitored single magnetic
lock and the FEM5700DM is a monitored double
magnetic lock with 12 or 24 Volt settings. Each
monitored magnetic lock has a built-in Hall Effect
Sensor for remote monitoring of Lock status (LSS).
The devices have a patented highly visible high
luminosity Light Panel and Door Status Sensor (DSS)
for remote monitoring of the door status through
a reed switch contact as well as a Lock Status
Sensor (LSS). The monitored devices come with a
Patened Anti-Tamper-Security-Plate as standard to
prevent hostile attacks on the dome-nut-fixing bolt
of the Armature Plate.” All FEM5700 Series Electro
Magnetic Locks come with a lifetime warranty and
have no residual magnetism.
fem5700 series
Technical DETAILS
PART No.
FEM5700 (single)
FEM5700D (double)
FEM5700M (single)
FEM5700DM (double)
Holding Strength
Up to 580kg (for single magnetic lock)
VOLTAGE/CURRENT
Dual Voltage 12/24VDC 12VDC=500mA (Double x2) 250VDC=260mA (Double x2)
APPROVALS
4 hour fire rated to A.S. and B.S. standards, SCEC approved for secure areas (FEM5700M & DM)
size
LP
LSS
DSS
NIL
MONITORING
Single door series magnet size:
L= 268 x W= 73 x D= 40mm
Double door series surface magnet size:
L= 535 x W= 73 x D= 40mm
Single door series armature plate size:
L= 190 x W= 61 x D= 16mm
Double door series armature plate size:
L= 190 x W= 61 x D= 16mm x 2 pcs
Single door series DSS-armature plate size:
L= 252 x W= 61 x D= 16mm
Double door series DSS-armature plate size:
L= 252 x W= 61 x D= 16mm x 2 pcs
Product FEATURES
•
Door and Lock Status Monitoring Sensor
(DSS & LSS with “M” Models)
•
Anti Tamper Plate (with “M” Models)
•
Long distance Light Panel (LP)
•
Built-in varistor (MOV) surge protection
•
Lifetime warranty
•
CE/C-Tick
•
4 hour fire tested
•
SCEC Approved for secure area (FEM5700M&DM)
•
No residual magnetism
35
new generation electric and electronic locking
Product Dimensions and Installation
FEM5700
FEM5700M
One way
domedome
nut
One
waysecurity
security
nut
Anti-Tamper Plate
One way security dome nut
Door
FEM5700D
FEM5700DM
536
.0
190
73.0
.0
536
.0
190
61.0
One
waysecurity
security
One way
dome nut
dome nut
40.0
73.0
66.0
.0
Doo
r
252
.0
r
61.0
Doo
One way security
dome nut
252
.0
36
product FEM3500 Series
HIGH QUALITY STANDARD ELECTRO MAGNETIC LOCKING DEVICES
SINGLE/DOUBLE DOOR SURFACE MOUNT
PRODUCT DESCRIPTION
The FEM3500 is an unmonitored single magnetic
lock and FEM3500D is an unmonitored double
magnetic lock with dual 12 or 24 Volt settings.
The FEM3500M is a monitored single magnetic
lock and the FEM3500DM is a monitored double
magnetic lock both with 12 or 24 Volt settings. Each
monitored magnetic lock has a built-in Hall Effect
Sensor for remote monitoring of Lock status (LSS).
The devices have a highly visible high luminosity
Light Panel and a Door Status Sensor (DSS) for
remote monitoring of the door status as well as Lock
Status Sensor (LSS). The monitored devices come
with a patented Anti-Tamper-Security-Plate as
standard to prevent hostile attacks on the domenut-fixing bolt of the Armature Plate.
All FEM3500 Series Electro Magnetic Locks
come with a lifetime warranty and have no
residual magnetism.
fem3500 series
Technical DETAILS
PART No.
FEM3500(Single)
FEM3500D(Double)
FEM3500M(Single)
FEM3500DM(Double)
FEM3500FM (Flush Mounted)
Holding Strength
Up to 280kg
VOLTAGE/CURRENT
Dual Voltage 12/24VDC, 12VDC= 500mA (Double x2) 24VDC= 250mA (Double x2)
4 hour fire rated to A.S. and B.S. standards
APPROVALS
NIL
MONITORING
size
LP
LSS
DSS
LSS
Single door series magnet size:
L= 238 x W= 48 x D= 25mm
Double door series surface magnet size:
L= 477 x W= 48 x D= 25mm
Single door series armature plate size:
L= 185 x W= 38 x D= 12mm
Double door series armature plate size:
L= 185 x W= 38 x D= 12mm x 2 pcs
Single door series DSS-armature plate size:
L= 185 x W= 38 x D= 12mm
Double door series DSS-armature plate size:
L= 185 x W= 38 x D= 12mm x 2 pcs
Product FEATURES
•
Door and Lock Status Monitoring Sensor (DSS & LSS)
•
Built-in varistor (MOV) surge protection
•
CE/C-Tick
•
Anti Tamper Plate (with “M” Models)
•
Long distance Light Panel (LP)
•
Lifetime warranty
•
4 hour fire tested
•
Guaranteed no residual magnetism
37
new generation electric and electronic locking
Product Dimensions and Installation
.5
25
FEM3500D & FEM3500DM
6.
82.
2
50
476
185
82.
50
38
200
82.
50
38
200
185
48. 1
43
82.
50
12
43
2
6.
Door
Door
Anti
temper plate
Anti-Tamper
One
security
dome nut
Oneway
way
security
dome
nut
FEM3500 & FEM3500M
Door
One way security dome nut
FEM3500FM
Door
One way security dome nut
Anti-Tamper Plate
Plate
38
product FEM4000HST & FEM4000D-HST
ELECTRO MAGNETIC HIGH SECURITY LOCKING DEVICE
Holding Force 580kg monitored
PRODUCT DESCRIPTION
The Electro Magnetic Lock FEM4000HST/DHST has
an electronically addressable armature plate,
unique to each magnet and has a holding force
of up to 580kg. The device has up to 4 hour fire
resistance rating tested to both Australian and
British Fire Test Standards. The device is provided
with built in surge protection and accepts both
12 and 24VDC. This Electro Magnetic Lock also
provides the following monitoring features:
1.
2.
Lock Status Sensor by Hall-Effect (LSS)
Internal CPU registered armature plate
The Electro Magnetic Lock FEM4000HST/DHST is
provided with a lifetime warranty and supplied
with an Anti-Tamper-Plate as standard, to prevent
hostile attacks on the dome-nut-fixing bolt of the
Armature Plate. The device is S.C.E.C. approved
for “Secure Areas.”
FEM4000HST & FEM4000D-HST
Technical DETAILS
PART No.
FEM4000HST (Single)
FEM4000DHST (Double)
Holding Strength
Up to 580kg
VOLTAGE/CURRENT
Dual Voltage 12/24VDC 12VDC=590mA 24VDC=290mA(Double x2)
APPROVALS
4 hour fire rated to A.S. and B.S. standards
S.C.E.C approved (secure area)
MONITORING
Size
LSS
Internal CPU register armature plate
(Registered to match the individual electromagnetic lock)
with security alarm sensor/time delay setting from 0-60 sec
Single door series magnet size: L= 268 x W= 73 x D= 40mm
Single door series armature plate size: L= 190 x W= 61 x D= 16mm
Double door series surface magnet size: L= 535 x W= 73 x D= 40mm
Double door series armature plate size: L= 190 x W= 61 x D= 16mm x 2 pcs
Product FEATURES
•
Electronically addressable armature plate
•
Guaranteed no residual magnetism
•
Lifetime warranty
•
CE & C-Tick
•
4 hour fire tested
•
SCEC Approved for secure areas
39
new generation electric and electronic locking
Product Dimensions and Installation
Door
Anti-Tamper Plate
One way security dome nut
40
16
536
190
82.
50
16
82.
50
190
73
61
82.
50
One way
way security
dome nut
One
security dome
nut
61
82.
50
Door
Door
40
product FEM2600HS
ELECTRO MAGNETIC HIGH SECURITY LOCKING DEVICE
Holding Force 280kg monitored
PRODUCT DESCRIPTION
The Electro Magnetic Lock FEM2600HS has an
electronically addressable armature plate, unique
to each magnet and has a holding force of up to
280kg. The device has up to 4 hour fire resistance
rating tested to both Australian and British Fire Test
Standards. The device is provided with built in surge
protection and accepts both 12 and 24VDC. This
Electro Magnetic Lock also provides the following
monitoring features:
1.
2.
Lock Status Sensor by Hall-Effect (LSS)
Internal CPU registered armature plate
The Electro Magnetic Lock FEM2600HS is provided
with a lifetime warranty and supplied with an
Anti-Tamper-Plate as standard, to prevent hostile
attacks on the dome-nut-fixing bolt of the
Armature Plate.
FEM2600HS
Technical DETAILS
PART No.
FEM2600HS
Holding Strength
Up to 280kg
VOLTAGE/CURRENT
Dual Voltage 12/24VDC, 12VDC=550mA 24VDC=270mA
(Double x2)
4 hour fire rated to A.S. and B.S. standards
APPROVALS
MONITORING
Size
LSS
Internal CPU register armature plate
(Registered to match the individual electromagnetic lock)
with security alarm sensor/time delay setting from 0-60 sec
Single door series magnet size: L= 238 x W= 47 x D= 26mm
Single door series armature plate size: L= 185 x W= 38 x D= 12mm
Product FEATURES
•
Light Panel (LP) for long distance visibility
•
Electronically addressable armature plate
•
Guaranteed no residual magnetism
•
Lifetime warranty
•
CE & C-Tick
•
4 hour fire tested
41
new generation electric and electronic locking
Product Dimensions and Installation
42
product FCCW Mini Series
HIGH QUALITY MINI ELECTRO MAGNETIC LOCKING DEVICES
SINGLE DOOR NON MONITORED
PRODUCT DESCRIPTION
The FSH small and compact range of “Mini”
electro magnetic locks are specifically designed for
securing cupboards, cabinets, lockers and the like,
where a reasonably high holding force is required.
fccw mini series
Technical DETAILS
PART No.
FCCW15S
Holding Strength
Up to 75kg
Up to 180kg
VOLTAGE/CURRENT
NIL
NIL
MONITORING
Dual Voltage 12/24VDC
12VDC= 240mA 24VDC= 120mA
Dual Voltage 12/24VDC
12VDC= 350mA 24VDC= 175mA
size
FCCW30S
FCCW30F (Flush mount)
Single door series magnet size:
L= 107 x W= 37 x D= 20mm
Single door series magnet size:
L= 166 x W= 39 x D= 21mm
Single door series armature plate size:
L= 65 x W= 32 x D= 9mm
Single door series armature plate size:
L= 130 x W= 32 x D= 8.3mm
Product FEATURES
•
Built-in varistor (MOV) surge protection
•
Zero residual magnetism
•
CE/C-Tick
•
Lifetime warranty
43
product FSH2500
ELECTRO MAGNETIC SHEAR LOCKING DEVICE SINGLE
DOOR MONITORED MORTISE MOUNT
PRODUCT DESCRIPTION
FSH shear locks are an evolutionary product
based on the proven EML concept, designed for
applications where the door swings up to a180º
degree arc.
Whilst a standard EML provides a tensile force, a
shear lock differs as it resists a shear or sliding force.
When the shear lock detects the door in the closed
position, the magnet “sucks” the armature plate up
by up to 5mm and traps the armature in the lock
body frame.
Despite the small size of the FSH shear lock, it is
capable of resisting up to 250kg of shear load.
The shear lock accepts voltages from 12 to 24VDC.
FSH2500
Technical Details
PART No.
FSH2500
Holding Strength
Up to 250kg holding force
VOLTAGE/CURRENT
at 12VDC x 1A(in-rush) 200mA(normal)
at 24VDC x 0.5A ‘100mA’
MONITORING
Lock Status Sensor
LED indicator
Size
Product FEATURES
•
Up to 250kg shear holding force
•
Lock status monitoring
•
2 year warranty
•
Low holding current
•
Multi Voltage12 to 24VDC
•
4 hour fire rated
Shear Locks series magnet size: L= 166 x W= 31 x D= 21mm
Shear Locks series armature plate size: L= 166 x W= 26 x D= 31mm
44
product FEM5000G
HIGH QUALITY WEATHER RESISTANT ELECTRO MAGNETIC GATE LOCKING DEVICES
PRODUCT DESCRIPTION
The Electro Magnetic Gate Lock FEM5000G has a
holding force of up to 630kg and is IP67 weather
resistant with a stainless steel body housing. The
device provides a dual fixing arrangement, a
built-in varistor surge protection and accepts
both 12 and 24VDC.
The Electro Magnetic Gate Lock also provides the
monitoring feature “Lock Status Sensor” by HallEffect (LSS). The Electro Magnetic Gate Lock comes
with a lifetime warranty and is supplied with an AntiTamper-Plate as standard to prevent hostile attacks
on the dome-nut-fixing bolt of the Armature Plate.
FEM5000G
Technical DETAILS
PART No.
FEM5000G
Holding Strength
Up to 630kg
VOLTAGE/CURRENT
Dual Voltage 12/24VDC,
12VDC= 080mA 24VDC= 240mA
MONITORING
LSS
size
Product FEATURES
•
Lock Status Monitoring Sensor (LSS)
•
Up to 630kg holding force
•
Stainless 304 steel body housing
•
Weather resistant IP67
•
Lifetime warranty
•
Anti Tamper Plate
•
CE/C-Tick
•
Guaranteed no residual magnetism
Magnet size: L= 220 x W= 63 x D= 45mm
Armature plate size: L= 190 x W= 61 x D= 16mm
45
new generation electric and electronic locking
Product Dimensions and Installation
46
product FEM4700FS-LSS|FEM4500FS RSW
HIGH QUALITY WEATHER RESISTANT MINI ELECTRO MAGNETIC GATE LOCKING DEVICES
PRODUCT DESCRIPTION
The Electro Magnetic Mini Gate Lock FEM4700FS-LSS
has a holding force of up to 380kg and the Electro
Magnetic Micro Gate Lock FEM4500FS-RSW has a
holding force of up to 200kg.
Both products are IP67 weather resistant with
stainless steel body housings. The devices provide
a dual fixing arrangement, a built-in varistor surge
protection and accept both 12 and 24VDC.
The Electro Magnetic Gate Locks also provide the
monitoring feature “Lock Status Sensor” (LSS).
The Electro Magnetic Gate Locks come with
a lifetime warranty.
fem4700FS-lss | fem4500fs-RSW
Technical DETAILS
PART No.
FEM4700FS-LSS
FEM4500FS-RSW
Holding Strength
Up to 380kg
Up to 200kg
VOLTAGE/CURRENT
Dual Voltage 12/24VDC,
12VDC=400mA 24VDC=200mA
Dual Voltage 12/24VDC,
12VDC=360mA 24VDC=180mA
LSS
LSS
MONITORING
size
Magnet size:
L= 220 x W= 47 x D= 30.5mm
Magnet size:
L= 162 x W= 26 x D= 31mm
Armature plate size:
L= 185 x W= 42 x D= 12mm
Armature plate size:
L= 130 x W= 30 x D= 8.7mm
Product FEATURES
•
Lock Status Monitoring Sensor (LSS)
•
Stainless 304 steel body housing
•
Weather resistant IP67
•
Lifetime warranty
•
CE/C-Tick
•
Guaranteed no residual magnetism
47
new generation electric and electronic locking
Product Dimensions and Installation
fem4700FS-lss
Door
fem4500FS-RSW
Door
One way security dome nut
48
product Electro Magnetic Locking Devices Accessories
PRODUCT DESCRIPTION
Adjustable “L” and “Z” brackets for inward
opening doors.
Technical DETAILS
PART No.
BRACKET TO SUIT
AMZB1-LP
FEM5000G/FEM5700/FEM4000HST*
AMZB1D-LP
FEM5700D/FEM4000DHST*
AMZB1-LP DSS
FEM5700M
AMZB1D-LP DSS
FEM5700DM
AMZB4-LP
FEM3500/FEM4700FS*
AMZB4D-LP
FEM3500D
AMZB4-LP
FEM3500M
2 x AMZB4D-LP
FEM3500DM
AMZB3
FCCW30S/FEM4500FS
PRODUCT DESCRIPTION
Adjustable “L” bracket for narrow header doors.
Technical DETAILS
PART No.
BRACKET TO SUIT
AMLB1
FEM5700
2 x AMLB1
FEM5700D
AMLB1
FEM5700M
2 x AMLB1
FEM5700DM
AMLB4
FEM3500/FEM3500M
2 x AMLB4
FEM3500D/FEM3500DM
AMFB3
FCCW30S/FEM4500FS
49
new generation electric and electronic locking
PRODUCT DESCRIPTION
Stick on armature plate holder for glass doors.
(recommended 3MVHB tape, not supplied)
Technical DETAILS
PART No.
BRACKET TO SUIT
AMAB1
FEM5700
2 x AMAB1
FEM5700D
AMAB1 DSS
FEM5700M
2 x AMAB1 DSS
FEM5700DM
AMAB4
FEM3500
2 x AMAB4
FEM3500D
AMAB4
FEM3500M
2 x AMAB4
FEM3500DM
PRODUCT DESCRIPTION
Glass Door Bracket “U-Profile” to fix armature plate
to 10-12mm glass doors.
Technical DETAILS
PART No.
BRACKET TO SUIT
AMGB1-12
FEM5700
2 x AMGB1-12
FEM5700D
AMGB1-12 DSS
FEM5700M
2 x AMGB1-12 DSS
FEM5700DM
AMGB4-12
FEM3500
2 x AMGB4-12
FEM3500D
AMGB4-12
FEM3500M
2 x AMGB4-12
FEM3500DM
electric strikes
Electromechanical Security
51
new generation electric and electronic locking
features
part no.
PP
High Security Electric EcoStrike
FES90M-P
52
High Security Electic Strike
FES20
fes20M
fes20M-R
fes20M-M
54
fea20m
FSH Retroline Electric Strike Replacements
56
fhc20m
fem10M
Electric Strike-ANSI Footprint
58
fes10
FES15M
Electric Strike-RIM Mounted
60
fes15
Compact Electric Strike
FES7
62
Glass Door Strike
FES4012
64
52
product FES90M-P
HIGH SECURITY ELECTRIC EcoStrike™
WITH PRE-LOAD CAPABILITY – AUSTRALIAN FOOTPRINT
PRODUCT DESCRIPTION
The patented FES90M-P motorised High Security
Electric EcoStrike with up to 35kg Pre-Load
capability is a revolutionary electric locking solution.
With a high Pre-Load /Side-Load tolerance and
minimal energy consumption in ‘Sleep-Mode’ it is
a truly “Green Locking Solution”.
The strike accepts voltages from 10 to 30VDC, is
pre-drilled for extension lips and has a unique and
simple fail secure (Power To Open)/ fail safe (Power
To Lock) switch-over function.
The door strike provides 3 forms of monitoring:
1. LSS (Lock Status Sensor)
2. DSS (Door Latch Sensor)
3. DPS (Door Position Sensor)
To utilise the Door Position Sensor monitoring
function (DPS), FSH is providing special Mortice Lock
Face Plates equipped with magnets, as separate
items (see Accessories). These Face Plates work in
conjunction with the FES90M-P built in Reed Switch.
FES90M-P
The electric strike consumes current less than 300mA
@ 12VDC at full 35kg pre-load only during locking
and unlocking action. In the locked or unlocked
state (Sleep-Mode), the electric strike consumes
current less than 15mA@12VDC.
FES90MP comes with a 10mm strike lip as standard,
to prevent possible personal injury and damage to
clothing as with 15mm lips.
Technical DETAILS
PART No.
FES90M-P
Function
Mortice Mount, Power-To-Lock/Power-To-Release field interchangeable, 35kg of Pre-Load capability
Holding Strength
Up to 1370kg
Tested to 1.5Mill full 35kg pre-load cycles
VOLTAGE/CURRENT
Multi Voltage 10-30VDC
Action Mode: 300mA@12VDC at full 35kg pre-load only during locking and unlocking action
Sleep-Mode: 15mA @ 12VDC in locked or unlocked mode
APPROVALS
4 hour fire rated to A.S. and B.S. Standards
CE
C-TICK
MONITORING
LSS - Status Sensor of the internal locking mechanism
DSS - Door Latch Sensor, Door latch engaged within strike keeper
DPS - Reed Switch Built-in, monitoring the door position
Environmental
Operational Temperature Range -20º to +60ºC
Product FEATURES
•
Releases with up to 35kg of Pre-Load/Side Load
•
Weather resistant
•
Motorised locking device
•
Fully monitored including Reed Switch for door position
•
Durability tested to 1.5 Mill. full pre-load cycles
of 35kg
•
Pre-drilled for extension lips
•
Up to 1300kg holding strength
•
Multi voltage from 10 to 30VDC
•
5 year warranty
•
Sleep Mode Current less than 15mA@12VDC
•
Guaranteed shock/hammer resistant
175.6
138
39.5
53
122
122
122
122
122
122
122
122
175.6
5
122
39.5
5
new generation electric and electronic locking
10
10
Product Dimensions and Installation
INSTALLATION
PRODUCT DIMENSIONS
MENSIONS
POSITI
5
28.
.5
28
26
26
175.6
39.5
175.6
122
122
122
122
122
122
39.5
Keeper
5
5
122
122
23
10
10
5
26
23
24
24
POSITION OF DOOR LATCH
3
138
26
.5
28
3
122
122
122
5
28.
138
INSTALLATION
10
10
INSTALLATION
POSITION
OF DOOR LATCH
POSITION OF DOOR
LATCH
Keeper
Keeper
176.0
123.1mm
Depth
15mm Lip
10mm Lip
Standard
Depth of cut-out will vary dependant on width of door frame
5 sizes of extension lips are available
5mm,10mm, 25mm, 50mm and 75mm
TEMPLATE
Lipless
162mm
ORDER DETAILS & accessories
176.0
123.1mm
PART No.
FES90M-P
Depth
15mmFES20-EL15
Lip
FES20-EL25
10mm Lip
Standard
FES20-EL50
40mm
FES20 Extension Lip 25mm
TEMPLATE
FES20 Extension Lip 50mm
cut thru
outline
FES20-EL75
FES20 Extension Lip 75mm
FES20MR·AUS
Mortice Lock Faceplates
with monitoring magnets for Aust. Lock Company Mortice Lock
162mm
FES20MR-DOR
FES20MR·KAB
FES20MR-LEG
Position this line to
your marking.1mm
magnets for
clearance
hasKABA
beenMortice Lock
176.0 Mortice Lock Faceplates with monitoring
Latch
front
face
SCALE
added.
123.1mm
Mortice Lock Faceplates
with monitoring magnets for LEGGE Mortice Lock
40mm
176.0
NOT
TO
123.1mm
Depth
FES20MR-LOC-NS
Mortice Lock Faceplates with monitoring magnets for Lockwood Narrow Style Mortice Lock
*These dimensions have a tolerance of +0.8mm/-0
Lipless
TEMPLATE
FES20MR-NOV
TEMPLATE
cut thru
cut thru
Mortice Lock Faceplates
with monitoring
magnets for Novas Mortice Lock
outline
outline
FES20-Rebate
Rebate Kit for FES20 Series (Stainless Steel)
162mm
NOT TO SCALE
44.8
Mortice Lock Faceplates with monitoring magnets for Dorma Mortice Lock
of cut-out
will vary
dependant
Depth of cut-out will vary Depth
dependant
on width
of door
frame on width of door frame
sizes
of extension
lips are Lock
available
FES20MR-LOC
Mortice
Faceplates with monitoring magnets for Lockwood Mortice Lock
5 sizes of extension lips 5are
available
15mm Lip
5mm,10mm,
5mm,10mm, 25mm, 50mm
and 75mm25mm, 50mm and 75mm
10mm Lip
Standard
Latch front face
Depth of cut-out will vary dependant on width of door frame
High Security Electric Eco Strike with pre-load capabilities Australian Footprint monitored 10mm Lip
5 sizes of extension lips are available *These dimensions have a tolerance of +0.8mm/-0
FES20
Extension
5mm,10mm, 25mm, 50mm
and
75mm Lip 15mm
Lipless
Depth
NOT TO SCALE
Product description
LatchSCALE
front face
NOT TO
40mm
162mm
Position this line to
your marking.1mm
clearance
has been
Latch
front face
added.
40mm
Position this line to
your marking.1mm
29.0
clearance has been
added.
44.8
44.8
29.0
29.0
Position this
your marking
clearance ha
added.
54
product FES20 series
HIGH SECURITY ELECTRIC STRIKES –AUSTRALIAN FOOTPRINT
PRODUCT DESCRIPTION
The patented FES20 Series high security electric
door strikes are manufactured from stainless steel
and have the advantage of accepting D.C
Voltages from 12 to 36Volts.
The FES20 Series Strikes are pre-drilled for extension
lips and the 20M model is provided with full
monitoring including true patented “Anti-Tamper.”
Independently tested, the FES20 Series electric
strikes are the strongest of their category.
FES20 Series Strikes now come with a 10mm strike lip
as standard, to prevent possible personal injury and
damage to clothing as with 15mm lips. The FES20M
Strike is SCEC approved for secure areas.
The FES20M, FES20M-R + FES20M-M+FES20M-L2 are
all SCEC approved for secure areas.
fes20 series
Technical DETAILS
PART No.
FES20
FES20M
FES20M-R
FES20M-M
Function
Mortise mount, Power To Lock/Power To Release site interchangeable. Input Voltage: 12-36VDC
Holding Strength
Up to 1490kg
VOLTAGE/CURRENT
12VDC= 220mA 24VDC= 120mA 36VDC= 80mA
SCEC Approved for secure area
FES20 & FES20M-R/M)
(4 hour fire rated)
APPROVALS
4 hour fire rated to A.S.
and B.S. standards
FES20 Non monitored
MONITORING
FES20M Fully monitored, door latch monitoring (DSS)
Lock Status Monitoring (LSS)
Strike installed in frame (ATS)
Non monitored
FES20M-R as FES20M plus additional Door Position
Reed Switch
FES20M-M as FES20M plus additional Reed Magnet
Product FEATURES
•
5 year warranty
•
Fire rated
•
Simple Power To Lock/Power To Release interchange
•
CE/C-Tick
•
No loose pins and springs
•
Superior holding strength
•
Pre-drilled for extension lips
•
SCEC listing
•
Mounting kit included
•
SCEC Approved for secure areas
(FES20M, FES20M-R, FES20M-M, FES20M-L2)
175.6
138
39.5
55
122
122
122
122
122
122
122
122
175.6
5
122
39.5
5
new generation electric and electronic locking
10
0
1
Product Dimensions and
Installation
INSTALLATION
PRODUCT DIMENSIONS
MENSIONS
POSITI
5
28.
.5
28
26
26
26
175.6
39.5
175.6
Keeper
122
122
122
122
122
138
122
39.5
23
5
5
122
122
POSITION OF DOOR LATCH
3
10
10
5
26
23
24
24
.5
28
3
138
5
28.
122
122
122
INSTALLATION
10
10
INSTALLATION
POSITION
OF DOOR LATCH
POSITION OF DOOR
LATCH
Keeper
Keeper
176.0
123.1mm
Depth
15mm Lip
10mm Lip
Standard
Depth of cut-out will vary dependant on width of door frame
5 sizes of extension lips are available
5mm,10mm, 25mm, 50mm and 75mm
TEMPLATE
Lipless
162mm
ORDER DETAILS & accessories
176.0
PART No.
FES20
15mm Lip
Depth
FES20M-L2
10mmFES20M-R
Lip
Standard
40mm
Depth of cut-out will vary dependant on width of door frame
High
Electric
Australian Footprint
monitored
10mm
Lip of +0.8mm/-0
5 sizes
of Security
extension
lips Strike
are available
*These dimensions
have
a tolerance
5mm,10mm,
and 75mm
High Security25mm,
Electric 50mm
Strike Australian
Footprint with no extension lip (Lipless)
High Security Electric Strike Australian Footprint, 10mm Lip, with additional Door Position Reed Switch
(Mortice Lock Face Plate with Magnets required, to be ordered as separate
cut item)
thru
TEMPLATE
FES20M-M
outline
High Security Electric Strike Australian Footprint, 10mm Lip, additional Door Position
Magnet
to be used in combination with Electric Mortice Locks
FES20MR-AUS
162mm
Mortice Lock Faceplates
with monitoring magnets for Aust. Lock Company Mortice Lock
FES20MR-DOR
Mortice Lock Faceplates with monitoringyour
magnets
for Dorma Mortice Lock
marking.1mm
Lipless
FES20MR-KAB
FES20MR-LEG
Position this line to
176.0Mortice Lock Faceplates with monitoring
clearance
hasKABA
beenMortice Lock
176.0
magnets for
Latch front face
NOT
TO SCALE
123.1mm
added.
123.1mm
40mm
Mortice Lock Faceplates
with monitoring magnets for LEGGE Mortice Lock
Depth
of cut-out
will vary
dependant
Depth of cut-out will vary Depth
dependant
on width
of door
frame on width of door frame
sizes
of extension
lips areLock
available
5 sizes of extension lips 5are
available
FES20MR-LOC
Mortice
Faceplates with monitoring magnets for Lockwood Mortice Lock
15mm Lip
5mm,10mm,
5mm,10mm, 25mm, 50mm
and 75mm25mm, 50mm and 75mm
FES20MR-LOC-NS
Mortice Lock Faceplates with monitoring magnets for Lockwood Narrow Style Mortice Lock
*These dimensions have a tolerance of +0.8mm/-0
10mm Lip
Standard
Lipless
TEMPLATE
FES20MR-NOV
TEMPLATE
cut thru
cut thru
Mortice Lock Faceplates
with monitoring
magnets for Novas Mortice Lock
outline
outline
FES20-Rebate
Rebate Kit for FES20 Series (stainless steel)
162mm
NOT TO SCALE
Latch front face
High Security Electric Strike Australian Footprint non-monitored 10mm Lip
FES20M
Depth
NOT TO SCALE
Product description
123.1mm
LatchSCALE
front face
NOT TO
40mm
162mm
Position this line to
your marking.1mm
clearance
has been
Latch
front face
added.
40mm
Position this line to
your marking.1mm
29.0
clearance has been
added.
44.8
44.8
29.0
44.8
29.0
Position this
your marking
clearance ha
added.
56
product FEA20M & FHC20M Series
FSH RetroLine ELECTRIC STRIKE REPLACEMENTS FOR HARCOR AND PADDE EA
PRODUCT DESCRIPTION
The RetroLine Series Strikes are designed to replace
the redundant PADDE EA and HARCOR Electric
Strikes. The strikes are modified versions of the FSH
FES20M product. A small modification on the door
frame has to be made to replace existing PADDE
EA or HARCOR strikes.
The RetroLine FEA20M and FHC20M high security
electric door strikes have Door Status and Lock
Status monitoring (DSS &LSS), are manufactured
from stainless steel and have the advantage of
accepting D.C. voltages from 12 to 36Volts.
FEA20M & FHC20M SERIES
Technical DETAILS
PART No.
FEA20M
FHC20M
Function
Mortise mount, Power To Lock/Power To Release site interchangeable. Input Voltage: 12-36VDC
Holding Strength
Up to 1490kg
VOLTAGE/CURRENT
12VDC=220mA 24VDC=120mA 36VDC=80mA
APPROVALS
MONITORING
Up to 4h fire rated to AS/BS Standards
Fully monitored, Door latch monitoring (DSS), Lock Status monitoring (LSS)
Product FEATURES
•
5 year warranty
•
Simple Power To Lock/Power To Release interchange
•
No loose pins and springs
•
CE/C-Tick
•
Superior holding strength
57
new generation electric and electronic locking
Product Dimensions and Installation
FEA20M
FHC20M
58
product FES10 Series
ELECTRIC STRIKE –ANSI FOOTPRINT
PRODUCT DESCRIPTION
The patented small ANSI footprint, FES10 Series
Electric Strikes are designed for light commercial
and residential applications. They accept voltages
of either 12 or 24VDC, are fire tested up to a 4 hour
fire resistance rating to both Australian and British
Fire Test Standards.
The strikes are easily site-interchangeable Power
To Lock (PTL) or Power To Release (PTR) by simply
changing over the Barbell mechanism. The device
is pre-drilled to cater for extension lips, come with
a 5 year warranty and have a holding strength of
up to 1300kg. The FES10M version comes with Door
Status Sensor (door latch monitoring). The FES10
version is weather resistant IP56 rated.
fes10 series
Technical DETAILS
PART No.
FES10M
FES10
Function
Mortise mount, Power To Lock/Power To Release
site interchangeable. Input Voltage: 12/24VDC
Holding Strength
Over 1300kg
VOLTAGE/CURRENT
Dual Voltage 12VDC/200mA 24VDC/100mA
APPROVALS
2 hour fire rated to A.S. and B.S. standards
MONITORING
Door Latch monitoring
size
ip rating
Non monitored
L= 125 x W= 42 x D= 35mm
N/A
Product FEATURES
•
Stainless steel faceplate and keeper
•
Patented Barbell mechanism for simple change of locking function
•
Low power consumption
•
Compatible with door latch depth of up to 15mm
•
Weather resistant IP56 (FES10 non monitored only)
•
Superior holding strength of up to 1300kg
•
5 year warranty
•
12 or 24VDC operation
•
Pre-drilled for extension lips
Weather resistant IP56
59
new generation electric and electronic locking
Product Dimensions and Installation
Mounting Installation
on wooden door frame
ORDER DETAILS & ACCESSORIES
PART No.
Product description
FES10M
Electric Strike ANSI Footprint
FES10
Electric Strike ANSI Footprint weather resistant IP56
FES10-EL15
FES10 Extension Lip 15mm
FES10-EL25
FES10 Extension Lip 25mm
FES10-EL50
FES10 Extension Lip 50mm
FES10-EL75
FES10 Extension Lip 75mm
Mounting installation
on metal, aluminium
or PVC door frame
60
product FES15 Series
ELECTRIC STRIKE – RIM MOUNTED (SURFACE)
PRODUCT DESCRIPTION
The patented RIM-Mounted, FES15 Series Electric
Door Strikes are designed for pedestrian gate
application or any other light commercial/
residential application where a RIM Mounted
strike is required. They accept voltages of either
12 or 24VDC, are fire tested up to a 2 hour fire
resistance rating to both Australian and British
Fire Test Standards.
The strike are easily site-interchangeable Power
To Lock (PTL) or Power To Release (PTR) by simply
changing over the Barbell mechanism. The device
comes with a 5 year warranty and has a holding
strength of up to 1250kg. The FES15M version comes
with Door Status Sensor (door latch monitoring)
and the non-monitored FES15 version is weather
resistant IP56 rated.
FES15 Series
Technical DETAILS
PART No.
FES15M
FES15
Function
Surface mount electric strike for rim latch control
Holding Strength
Over 1252kg
VOLTAGE/CURRENT
Dual voltage 12VDC/200mA 24VDC/100mA
APPROVALS
2 hour fire rating
MONITORING
Door latch monitoring
Anti Tamper monitoring
Non monitored
ip rating
N/A
Weather resistant IP56
Product FEATURES
•
Barbell mechanism for easy change of locking function
•
Low power consumption
•
Weather resistant IP56 (FES15 non monitored only)
•
Superior holding strength of up to 1250kg
•
5 year warranty
•
12 or 24VDC operation
•
Surface mount for RIM-Locks
61
new generation electric and electronic locking
Product Dimensions and Installation
Timber Door Frame Cut Out
Mechanical Door Lock Configuration
ORDER DETAILS
PART No.
Product description
FES15M
Electric Strike RIM-Mounted
FES15
Electric Strike RIM-Mounted weather resistant IP56
62
product FES7
COMPACT ELECTRIC STRIKE
PRODUCT DESCRIPTION
The Compact Electric Strike FES7 is one of the
smallest and most versatile strikes in the world today
and is suitable for all types of door frames. Designed
to be fitted in place of an entrance set strike plate.
Minimal effort is required when installing the unit.
The compact size also assists with maintaining
the integrity and strength of the door frame. The
versatile strike can be mounted on the right or left
hand side of a door and is factory configured to
operate in fail secure mode.
FES7
Technical DETAILS
PART No.
FES7
Function
Power To Open (Fail Secure)
Holding Strength
Static force: 500kg
Dynamic force: 60J
(S5 according to AS4745.2)
VOLTAGE/CURRENT
12VDC ~ 90mA
MONITORING
NIL
Product FEATURES
•
One of the world’s smallest strikes
•
Easy installation
•
Ideal for wooden, steel & aluminium frames
•
Size to suit standard entrance set strike plates
•
12VDC low current draw
•
Continuously rated solenoid
63
new generation electric and electronic locking
Product Dimensions and Installation
Wooden Jamb Installation
(Flush Mount)
Metal Jamb Installation
(Flush Mount)
64
product FES4012
GLASS DOOR STRIKE
PRODUCT DESCRIPTION
The FES4012 is suitable for single action 90°+ degree
hinged glass door installations. The device is not
suitable for double action 180° degree swing
through doors.
FES4012
Technical DETAILS
PART No.
FES4012
Function
Mortise mount, Power To Lock glass door electric strike
Holding Strength
VOLTAGE/CURRENT
MONITORING
size
Product FEATURES
•
Power To Lock
•
304 stainless steel faceplate
•
304 stainless steel lock body
•
Easy installation
•
Low power consumption and low temperature
•
Continuous operation
•
Used on glass thickness from 10 to 12mm
Up to 300kg
12VDC/240mA
Non monitored
L= 148.7 x W= 27.6 x D= 30.1mm
65
new generation electric and electronic locking
Product Dimensions and Installation
Typical Intallation Detail
Door Strike Configuration
Cut Out Dimension
Metal Door Frame Installation
Electromechanical Drop Bolts
Electromechanical Security
67
new generation electric and electronic locking
features
part no.
PP
High Security Motorised Drop Bolt
EcoLock™
VE1260
68
DB1260PTO
Standard Electric Drop Bolt
72
DB1260PTL
68
product VE1260
HIGH SECURITY MOTORISED DROP BOLT WITH PRE-LOAD CAPABILITY EcoLock™
PRODUCT DESCRIPTION
The patented EcoLock VE1260 is a high torque
motor driven Drop Bolt with up to 35kg pre-load/
side load tolerance. It can be installed vertically
in the door frame (lock style) or horizontally in the
frame header and has a symmetric dead-bolt
mechanism to allow to be used on 180° degree
swing through doors.
The VE1260 is considered a “Green Product” as
it consumes an inrush current of 290mA@12VDC
only during locking and unlocking action (Active
Mode), then in the locked or unlocked state
(Sleep-Mode), the Drop Bolt consumes current
less than15mA@12VDC.
A series of additional Strike Plates allow for door
misalignment of up to +12mm
and a retrofit version
of the FSH Eco Lock is available to suit the PADDE/
TRIMEC ES8000 drop bolt footprint.
An optional LED red/green indicator unit
is available.
VE1260
Technical DETAILS
Technical DETAILS
PART No.
VE1260
Function
Mortice Mount, power-to-lock/power-to-release field interchangeable,
up to 35kg of Pre-Load capability, unlocking and up to 6.5kg locking
Holding Strength
Up to 1000kg
VOLTAGE/CURRENT
Multi Voltage 12-30VDC
Active Mode: Locking/Unlocking cycle current is 0.29A to 0.85A depending on the side load.
More side load = more current. See preload vs. current graph.
Sleep-Mode: After locking/unlocking the current drops down to ~0.015A (15mA)
APPROVALS
CE
C-Tick
Fire rated in accordance with AS1905.1.2005 Part 1 to up to 4 hours on fire door assemblies
MONITORING
Lock Status Sensor of the internal locking mechanism
Door Status Sensor Built-in Reed Switch, monitoring the door position
Environmental
Operational Temperature Range -20° to +60°C
Durability
Exceeding Australian Standard AS4145.2-2008
400,000 operating cycles
•
Durability D7
Strength
Meeting Australian Standard AS4145.2-2008
•
Static Strength S8
•
Impact Strength S8
Product
MaximumFEATURES
Door Gap
door misalignment
8mm
Standard Strike Plate +
- 4mm Special Strike Plate up to +
- 12mm
Product FEATURES
•
Fully monitored including Reed Switch for
door position
Durability tested to 400,000 cycles
•
Up to 1000kg Holding Strength
Multi voltage from 12 to 30VDC
•
5 year warranty
Sleep-Mode Current less than 15mA@12VDC
•
Retrofit version for Trimec/PADDE ES8000
(VE1260S Square Edge Version)
•
Releases with up to 35kg of Pre-Load/Side Load
•
Motorised locking device
•
•
•
69
new generation electric and electronic locking
Product Dimensions and Installation
1
2
3
5
4
1
2
6
3
7
Issue
8
Description
7
8
Issue
Description
EN Ref. INT. CHKD
Date
A
VE1260R Round Edge
A
VE1260S Square Edge
DOOR JAMB
B
6
Date
A
MAXIMUM
DOOR GAP
5
4
EN Ref. INT. CHKD
DOOR JAMB
MAXIMUM
DOOR GAP
MOUNTING
BRACKETS
DOOR
MOUNTING
BRACKETS
B
B
DOOR
8.0mm
MAX.
8.0mm
MAX.
C
C
C
D
D
D
FACEPLATE
FACEPLATE
STRIKE PLATE
E
E
UNLESS OTHERWISE NOTED
TOLERANCES ARE
SEE EN FOR
DRAWING
AUTHORIZATION
1
2
3
5
4
6
Locking Device VE1260R Round Edge
LOCK
FACEPLATE
LINE 2
1
2
3
4
25.0
2 DECIMAL
ANGLES
Description
Issue
SURFACE FINISH
0.25
0.10
0.05
0.5
3.2 1
ALL DIMENSIONS IN MILLIMETERS
MATERIAL:
F
A
0 DECIMAL
7 1 DECIMAL
PROJECTION
PROPERTY OF
FIRE & SECURITY HARDWARE P/L
NO REPRODUCTION IN PART
OR WHOLE IS PERMITTED WITHOUT
WRITTEN AUTHORISATION
Locking Device VE1260S Square Edge
A
HEAT TREATMENT:
25.0
5
1
DRAWN:
SCALE:
SHEET
DRAWING NO.:
SIZE:
6
2
UNLESS OTHERWISE NOTED
TOLERANCES ARE
SEE EN FOR
DRAWING
AUTHORIZATION
8
DRAWN TO AS1100
EN Ref. INT. CHKD Date UNIT 9, 30 PERRY STREET
DO NOT SCALE DRAWING
2 MATRAVILLE, NSW 2036, AUSTRALIA
MIN
TITLE
A
FINISH:
E
STRIKE PLATE
7
1 OF 1
1:3
A3
3
F
0.25
0 DECIMAL
1 DECIMAL
0.10
2 DECIMAL
0.05
ANGLES
0.5
3.2
7
SURFACE FINISH
Issue
Description
ALL DIMENSIONS IN MILLIMETERS
MATERIAL:
8
LOCK
FACEPLATE
4
PROPERTY OF
FIRE & SECURITY HARDWARE P/L
NO REPRODUCTION IN PART
OR WHOLE IS PERMITTED WITHOUT
WRITTEN AUTHORISATION
PROJECTION
6
DATE:
LINE 2
3
5
4
5
DRAWN TO AS1100
UNIT 9, 30 PERRY STREET
MATRAVILLE, NSW 2036, AUSTRALIA
DO NOT
8 SCALE DRAWING
MIN
TITLE
EN Ref. INT. CHKD
DRAWN:
SCALE:
A
SHEET
HEAT TREATMENT:
SIZE:
6
F
Date
FINISH:
1 OF 1
1:3
DATE:
DRAWING NO.:
A3
8
7
18.0
DOOR JAMB
22.5
30.5
22.5
DOOR JAMB
31.6
B
B
B
49.5
163.0
256.0
163.0
210.0
B
C
C
C
C
30.0
210.0
185.0
256.0
185.0
D
D
D
D
41.5
R12.5
30.0
30.5
25.0
41.5
18.0
25.0
E
E
E
E
SEE EN FOR
DRAWING
AUTHORIZATION
SEE EN FOR
DRAWING
AUTHORIZATION
PROJECTION
UNLESS OTHERWISE NOTED
TOLERANCES ARE
0 DECIMAL
1 DECIMAL
2 DECIMAL
ANGLES
SURFACE FINISH
0.25
0.10
0.05
0.5
3.2
ALL DIMENSIONS IN MILLIMETERS
MATERIAL:
F
1
1
2
3
4
5
Strike Plate VE1260R Round Edge
2
3
4
F
PROJECTION
PROPERTY OF
FIRE & SECURITY HARDWARE P/L
NO REPRODUCTION IN PART
OR WHOLE IS PERMITTED WITHOUT
WRITTEN AUTHORISATION
DRAWN TO AS1100
MIN
TITLE
FDB80MP
- VE LOCK
1
DRAWN:
1
6
FINISH:
HEAT TREATMENT:
SHEET
Issue
6
5
SIZE:
EA
SCALE:
1:2
DATE:
7DRAWING NO.:
1 OF 1
F
2
3
18/10/2012
2
4
3
8
EN Ref. INT. CHKD
8
5
5
LINE 3
27.0
FDB80MP - VE LOCK
DRAWN:
SHEET
HEAT TREATMENT:
SIZE:
SCALE:
EA
1 OF 1
1:2
DRAWING NO.:
DATE:
F
18/10/2012
A3
7
8
6
7
Issue
8
Description
EN Ref. INT. CHKD
Date
A
A
LINE 1
(HALF THICKNESS OF DOOR)
Ø22.0 x 20 DEEP
LINE 3
B
UNIT 9, 30 PERRY STREET
MATRAVILLE, NSW 2036, AUSTRALIA
DO NOT SCALE DRAWING
TITLE
FINISH:
6
4
PROPERTY OF
FIRE & SECURITY HARDWARE P/L
NO REPRODUCTION IN PART
OR WHOLE IS PERMITTED WITHOUT
WRITTEN AUTHORISATION
DRAWN TO AS1100
MIN
Date
LINE 1
(HALF THICKNESS OF DOOR)
27.0
Ø22.0 x 20 DEEP
0.25
0.10
0.05
0.5
3.2
Strike Plate VE1260S Square Edge
Description
A3
7
A
A
0 DECIMAL
1 DECIMAL
2 DECIMAL
ANGLES
SURFACE FINISH
UNIT 9, 30 PERRY STREET
MATRAVILLE, NSW 2036, AUSTRALIA
DO NOT SCALE DRAWING
UNLESS OTHERWISE NOTED
TOLERANCES ARE
ALL DIMENSIONS IN MILLIMETERS
MATERIAL:
B
7.0
B
B
22.5
53.0
28.0
28.0
C
C
C
210.0
STRIKE PLATE
3mm THICK
242.0
103.5
D
D
D
DOOR
E
STRIKE PLATE
3mm THICK
E
SEE EN FOR
DRAWING
AUTHORIZATION
PROJECTION
UNLESS OTHERWISE NOTED
TOLERANCES ARE
0 DECIMAL
1 DECIMAL
2 DECIMAL
ANGLES
SURFACE FINISH
F
3
4
5
0.25
0.10
0.05
0.5
3.2
ALL DIMENSIONS IN MILLIMETERS
MATERIAL:
F
2
132.0
D
R12.5
R12.5
1
C
256.0
185.0
6
PROPERTY OF
FIRE & SECURITY HARDWARE P/L
NO REPRODUCTION IN PART
OR WHOLE IS PERMITTED WITHOUT
WRITTEN AUTHORISATION
DRAWN TO AS1100
MIN
E
DO NOT SCALE DRAWING
TITLE
E
SEE EN FOR
DRAWING
AUTHORIZATION
UNIT 9, 30 PERRY STREET
MATRAVILLE, NSW 2036, AUSTRALIA
F
PROJECTION
UNLESS OTHERWISE NOTED
TOLERANCES ARE
0 DECIMAL
1 DECIMAL
2 DECIMAL
ANGLES
SURFACE FINISH
DRAWN:
SCALE:
FINISH:
SHEET
DRAWING NO.:
HEAT TREATMENT:
SIZE:
7
DOOR
1 OF 1
1:3
A3
8
DATE:
0.25
0.10
0.05
0.5
3.2
ALL DIMENSIONS IN MILLIMETERS
MATERIAL:
PROPERTY OF
FIRE & SECURITY HARDWARE P/L
NO REPRODUCTION IN PART
OR WHOLE IS PERMITTED WITHOUT
WRITTEN AUTHORISATION
DRAWN TO AS1100
MIN
DO NOT SCALE DRAWING
TITLE
UNIT 9, 30 PERRY STREET
MATRAVILLE, NSW 2036, AUSTRALIA
SCALE:
DRAWN:
FINISH:
SHEET
HEAT TREATMENT:
SIZE:
1 OF 1
A3
1:3
DRAWING NO.:
DATE:
F
70
1
2
3
5
4
6
7
8
Issue
Description
EN Ref. INT. CHKD
Date
A
Product Dimensions and Installation
B
Glass Door Box VE1260R-GL
228.2
47.5
31.4
C
20.8
180
D
2
3
5
4
6
31.4
1
7
8
Issue
Description
EN Ref. INT. CHKD
Y1 RELEASED FOR PROTOTYPING
Date
11/6/13
A
A
185
E
B
B
Accessory Strike Plate VE1260S-ST6
256.0
MAGNET
76.0
3.0
12.0
UNLESS OTHERWISE NOTED
TOLERANCES ARE
SEE EN FOR
11.0x90
DRAWING
AUTHORIZATION
0 DECIMAL
1 DECIMAL
PROJECTION
C
2 DECIMAL
C
ANGLES
SURFACE FINISH
31.0 23.6
F
1
2
3
3
4
4
5
5
6
D
Issue
EN Ref. INT. CHKD
Y1 RELEASED FOR PROTOTYPING
Date
22/1/13D
110.0
A
A
242.0
E
E
B
B
Accessory Strike Plate VE1260S-ST9
256.0
76.0
3.0
SEE EN FOR
DRAWING
AUTHORIZATION
12.0
UNLESS OTHERWISE NOTED
TOLERANCES ARE
0 DECIMAL
1 DECIMAL
2 DECIMAL
ANGLES
PROJECTION
MAGNETS
SURFACE FINISH
0.25
0.10
0.05
0.5
3.2
C
FINISH:
PROPERTY OF
FIRE & SECURITY HARDWARE P/L
NO REPRODUCTION IN PART
OR WHOLE IS PERMITTED WITHOUT
WRITTEN AUTHORISATION
DRAWN TO AS1100
MIN
ALL DIMENSIONS IN MILLIMETERS
MATERIAL:
F
31mm VE Lock Strike Plate
DRAWN:
SHEET
HEAT TREATMENT:
1
2
3
35.0
1
2
27.6
4
3
5
4
SCALE:
EA
1 OF 1
SIZE:
6
5
UNIT 9, 30 PERRY STREET
MATRAVILLE, NSW 2036, AUSTRALIA
DO NOT SCALE DRAWING
TITLE
3mm THICK 304 SS SHEET N4 FINISH
F
DATE:
11/6/2013
11.0x90
DRAWING NO.:
PL0017-1
A3
7
6
1:1
7
8
Description
EN Ref. INT. CHKD
Y1 RELEASED FOR PROTOTYPING
Date
11/6/13
A
A
6.0
35.0
110.0
D
C
8
Issue
D
242.0
B
B
Accessory Strike Plate VE1260S-ST12
E
E
256.0
3.0
76.0
MAGNETS
12.0
SEE EN FOR
DRAWING
AUTHORIZATION
C
PROJECTION
UNLESS OTHERWISE NOTED
TOLERANCES ARE
0 DECIMAL
1 DECIMAL
2 DECIMAL
ANGLES
SURFACE FINISH
F
0.25
0.10
0.05
0.5
3.2
ALL DIMENSIONS IN MILLIMETERS
MATERIAL:
40.0 32.6
FINISH:
PROPERTY OF
FIRE & SECURITY HARDWARE P/L
NO REPRODUCTION IN PART
OR WHOLE IS PERMITTED WITHOUT
WRITTEN AUTHORISATION
DRAWN TO AS1100
MIN
DO NOT SCALE DRAWING
TITLE
HEAT TREATMENT:
1
2
3
4
5
6
11.0x90
C
UNIT 9, 30 PERRY STREET
MATRAVILLE, NSW 2036, AUSTRALIA
35mm VE LOCK STRIKE PLATE
3mm THICK 304 SS SHEET N4 FINISH
DRAWN:
SHEET
SIZE:
7
EA
1 OF 1
A3
6.0
SCALE:
1:1
DRAWING NO.:
DATE:
F
11/6/2013
PL0018-1
8
35.0
D
110.0
D
242.0
E
SIZE:
7
8
Description
E
UNIT 9, 30 PERRY STREET
MATRAVILLE, NSW 2036, AUSTRALIA
VE Lock Glass Door Mount -Housing W
Assembly DRAWN: EA SCALE: 1:1 DATE: 30/10/2
SHEET
LINISH AS PER INSTRUCTIONS
HEAT TREATMENT:
6
7
35.0
DO NOT SCALE DRAWING
TITLE
SEE BOM TABLE
FINISH:
2
PROPERTY OF
FIRE & SECURITY HARDWARE P/L
NO REPRODUCTION IN PART
OR WHOLE IS PERMITTED WITHOUT
WRITTEN AUTHORISATION
DRAWN TO AS1100
MIN
ALL DIMENSIONS IN MILLIMETERS
MATERIAL:
6.0
1
0.25
0.10
0.05
0.5
3.2
1 OF 1
A3
DRAWING NO.:
HS0002
8
71
new generation electric and electronic locking
ORDER DETAILS
PART No.
Product description
EcoLock VE1260 Series
EcoLock Pre-Load Drop Bolt 25mm Face Plate
including 27mm Strike Plate ROUND EDGE to cater for +4mm door misalignment
EcoLock Pre-Load Drop Bolt 30mm Face Plate
VE1260R
VE1260S
including 27mm Strike Plate SQUARE EDGE to cater for +4mm door misalignment
(PADDE ES8000 Replacement)
Accessories VE1260 Series
VE1260R-GL
Glass Door Box for VE1260R Lock or VE1260R-ST4 Strike Plate ROUND EDGE
VE1260LED-BOX
LED Monitor Box for Lock-Status Monitoring Indication (Red/Green)
VE1260R-SCEC
Security Bracket for VE1260R
VE1260S-ST6
Strike Plate 31mm for VE1260 Series to cater for +6mm
door misalignment minimum
Door Thickness 35mm SQUARE EDGE
VE1260S-ST9
Strike Plate 35mm for VE1260 Series to cater for +9mm door misalignment minimum
Door Thickness 40mm SQUARE EDGE
VE1260S-ST12
Strike Plate 40mm for VE1260 Series to cater for +12mm door misalignment minimum
Door Thickness 50mm SQUARE EDGE
Current vs. preload graph
VE1260 Maximum Current vs. Preload
1
0.9
0.8
Current Amps
0.7
12 Volt
0.6
24 Volt
0.5
0.4
0.3
0.2
0.1
0
0
1
2
3
4
Preload Kg
5
6
7
8
72
product DB1260
STANDARD ELECTRIC DROP BOLT MORTICE MOUNT
PRODUCT DESCRIPTION
The DB1260 is designed for installation on narrow
frame swing doors, and/or glass door mounting.
The drop bolt body depth of 35mm will fit into
a 44mm depth door frame. The drop bolt is
available in either “Power To Lock” or “Power
To Release” format.
DB1260
Technical DETAILS
PART No.
DB1260PTO (Power To Release)
DB1260PTL (Power To Lock)
Function
Slimline mortise mount drop bolt
Holding Strength
Up to 300kg
VOLTAGE/CURRENT
12VDC 1.15A(in-rush) 250mA holding
APPROVALS
4 hour fire rated to A.S. and B.S. standards
MONITORING
Door sensor
Remote release
Bi-coloured LED
Audible tone
Environmental
L= 210 x W= 25 x D= 35mm
Product FEATURES
•
Internal control circuits protect drop bolt pin from damage
•
Power To Lock or Power To Release (to be specified)
•
Auto lock function
•
Built-in varistor (MOV) for surge protection
•
Time delay setting at 0/3/6/10 secs
•
1 year warranty
73
new generation electric and electronic locking
Product Dimensions and Installation
GLASS DOOR MOUNT APPLICATION
1.
All surfaces must be clean, free of dirt,oil or grease
2.
Apply 3M VHB adhesive (not supplied) in
accordance with the manufactures
instructions and fit to glass door/head
panel as detailed below
ORDER DETAILS & ACCESSORIES
PART No.
Product description
DB1260
DB1260PTO
Slimline Drop Bolt Faceplate 25mm round style Power To Release/Open
DB1260PTL
Slimline Drop Bolt Faceplate 25mm round style Power To Lock
Drop Bolt Accessories
DB1260BOX
Surface Mount Box for DB1260 Slimline Drop Bolt
DB1260LPLATE
Long Strike Plate for DB1260 Slimline Drop Bolt
DB1260LMAG
L-Glass-Fixing-Bracket for DB1260 with Magnets
DB1260L
L-Glass-Fixing-Bracket for DB1260 without Magnets
UBG-1260L
Glass Patch Fitting with Strike Plate LEFT handed
UBG-1260R
Glass Patch Fitting with Strike Plate RIGHT handed
ElectroMECHANICAL cabinet locks
Electromechanical Security
75
new generation electric and electronic locking
features
part no.
PP
Early Warning Electromagnetic
Cabinet Lock
EW3000
76
FCL0001
Electric Cabinet Lock
78
FCL0002
76
product EW3000
EARLY WARNING ELECTROMAGNETIC CABINET LOCK MONITORED
PRODUCT DESCRIPTION
The FEW3000 early warning alarm lock is purposely
designed to provide security to all types of drug
cabinets, refrigerators, lockers, show cases,
containers and the like where not only locking but
also monitoring of both the locking device (LSS)
power on / power off, and door position (DSS),
door opened or closed, is of concern.
The FEW3000 is also provided with the unique
feature of “Early Warning”, in the event that
unauthorised attempts are made to open the
door the locking device triggers a changeover
relay signalling ‘unauthorised attempted entry’.
The lock has a holding force of up to 40kg and
accepts 12VDC with a current of 0.3amps and has
a working temperature of minus 10°C to plus 50°C.
EW3000
Technical DETAILS
PART No.
FEW3000
Holding Strength &
Durability
Up to 40kg
VOLTAGE/CURRENT
12VDC/300mA
MONITORING
DSS, Door Status, LSS, Lock Status, Early Warning
size
Locking Device L= 107 x W= 37 x D= 25mm
Armature Plate L= 80 x W = 25 x D = 9mm
Product FEATURES
•
Working temperature -10° to +50°C
•
Full monitoring DSS/LSS
•
Early warning feature
•
5 year warranty
•
Low power consumption
•
Power OFF to Release Door
77
new generation electric and electronic locking
Product Dimensions and Installation
78
product FCL0001 & FCL0002
ELECTRIC CABINET LOCK
PRODUCT DESCRIPTION
The FCL0001 & FCL0002 are suitable for surface
mount installation on all types of cabinets, or
lockers. The cabinet locks are designed to fit into
cabinets and lockers with hinged or sliding doors
from either the front or side of the door. The lock
function is interchangeable between Power To Lock
and Power To Release. The devices are supplied in
a dual voltage configuration, 12VDC or 24VDC.
The FCL0002 Cabinet Lock version comes with Lock
Status Sensor (LSS), monitoring the locking pin and
Door Status Sensor (DSS), monitoring if the door is
open or close.
FCL0001 & FCL0002
Technical DETAILS
PART No.
FCL0001
FCL0002
Function
Surface mount cabinet/Locker electric lock
Surface mount cabinet/Locker electric lock
Holding Strength
Up to 150kg
Up to 150kg
VOLTAGE/CURRENT
12VDC/190mA 24VDC/90mA
12VDC/200mA 24VDC/100mA
monitoring
N/A
DSS, Door Status
size
L= 72.7 x W= 28.8 x D= 28.5mm
L= 93 x W= 30x D= 32mm
Product FEATURES
•
Small size
•
Power To Lock/Power To Release changeover
•
Full monitoring DSS/LSS (FCL0002)
•
12 or 24VDC
•
Up to 150kg holding force
•
5 year warranty
79
new generation electric and electronic locking
Product Dimensions and Installation
FCL0001
FCL0002
32mm
30mm
70mm
31mm
94mm
FSH
22mm
ORDER DETAILS
PART No.
Product description
FLC0001
Cabinet Lock
FLC0002
Cabinet Lock monitored
FCL0001-AP
Armature Plate for FCL0001 and FLC0002
electromagnetic door holders
Electromechanical Security
J
81
new generation electric and electronic locking
features
part no.
PP
Standard Magnetic Door Holders
R40
82
R40
Standard Magnetic Door Holders
84
R60
Heavy Duty Magnetic Door Holder
Fire Rated
35000 Series
86
Heavy Duty Magnetic Door Holder
Fire Rated with Extension
35000 Series
88
82
product R40 Series
STANDARD MAGNETIC DOOR HOLDER FIRE RATED
PRODUCT DESCRIPTION
Fire and smoke door, magnetic holder, titanium
alloy surface finished, elegant appearance.
Installed on fire and smoke doors in projects where
doors are required to be held in the open position
for both pedestrian and general traffic, the devices
have to be linked into a buildings fire/smoke
alarm system.
When an alarm occurs, power is removed from the
devices and the doors are returned to the closed
condition, preventing the spread of fire and/or
smoke to other areas. The devices are fire tested
to a rating of 4 hours and are supplied either
12 or 24VDC.
r40
Technical DETAILS
PART No.
R40-12(12Volt)
Function
Wall mount electro magnetic door holder
for fire and smoke doors
Floor mount electro magnetic door holder
for fire and smoke door
Holding Strength
Up to 25kg
Up to 25kg
VOLTAGE/CURRENT
12VDC/160mA 24VDC/80mA
12VDC/160mA 24VDC/80mA
size
D= 41.5 x W= 71.8 x H= 85.3
D= 62 x W= 59 x H= 88mm
Product FEATURES
•
Fire rated
•
Up to 25kg holding force
•
12 and 24VDC options
•
Floor mount and wall mount options
•
Fail safe operation
•
2 year warranty
R40-24(24Volt)
R40PCV12(12Volt)
R40PCV24(24Volt)
83
new generation electric and electronic locking
Product Dimensions and Installation
Floor Mount R40PCV-12/24
Floor Mount R40PCV-12/24
TYPE OF INSTALLATION
ORDER DETAILS
Extension Wall Mounting
Floor Mounting
Wall Mounting
84
product R40 & R60
STANDARD MAGNETIC DOOR HOLDER FIRE RATED WITH EXTENSION
PRODUCT DESCRIPTION
Fire and smoke door magnetic holder, titanium alloy
surface finished, elegant appearance. Installed on
fire and smoke doors in projects where doors are
required to be held in the open position for both
pedestrian and general traffic, the devices have to
be linked into a buildings fire/smoke alarm system.
When an alarm occurs, power is removed from the
devices and the doors are returned to the closed
condition, preventing the spread of fire and/or
smoke to other areas. The devices are fire tested
to a rating of 4 hours and are supplied either
12 or 24VDC.
r40 & r60
Technical DETAILS
PART No.
R40PCH12(12Volt)
R40PCH24(24Volt)
R60PCV12(12Volt)
R60PCV24(24Volt)
Function
Wall mount extension type electro magnetic door
holder for fire and smoke doors
Floor mount electro magnetic door holder
for fire and smoke doors
Holding Strength
Up to 25kg
Up to 60kg
VOLTAGE/CURRENT
12VDC/160mA 24VDC/80mA
12VDC/180mA 24VDC/90mA
size
H= 59 x W= 59 x D= 108mm
L= 60 x W= 108 x H= 60mm
Product FEATURES
•
Fire rated
•
R40 up to 25kg holding force
•
R60 up to 60kg holding force
•
12 and 24VDC options
•
Floor mount and wall mount options
•
2 year warranty
85
new generation electric and electronic locking
Product Dimensions and Installation
Wall Mount R40PCH-12/24
Floor Mount R60PCV-12/24
TYPE OF INSTALLATION
Extension Wall Mounting
Floor Mounting
Wall Mounting
86
product 35000 SerieS
HEAVY DUTY MAGNETIC DOOR HOLDER FIRE RATED
PRODUCT DESCRIPTION
Heavy duty fire and smoke door magnetic holder,
with 40kg holding force, titanium alloy surface
finished, elegant appearance. Installed on fire and
smoke doors in projects where doors are required
to be held in the open position for both pedestrian
and general traffic, the devices have to be linked
into a buildings fire/smoke alarm system.
When an alarm occurs, power is removed from
the devices and the doors are returned to the
closed condition, preventing the spread of fire
and/or smoke to other areas. The devices are fire
tested to a rating of 4 hours and are supplied either
12 or 24VDC.
35000 series
Technical DETAILS
PART No.
35772
description
Heavy duty floor mount door holder box, cream colour
type of mount
Floor mount
size
D= 67.5 x W= 115 x H= 84mm
PART No.
35770
35771
function
Heavy duty flush mount magnetic door to suit standard electrical box.
Or Floor mount with 35772 box
holing force
Up to 40kg
VOLTAGE/CURRENT
size
Product FEATURES
•
Fire rated
•
Up to 40kg holding force
•
12 and 24VDC options
•
Floor mount and wall mount options
•
2 year warranty
12VDC/100mA
24VDC/50mA
D= 50 x W= 74 x H= 115mm
87
new generation electric and electronic locking
Product Dimensions and Installation
Wall Mount 35770 & 35771
Floor Mount Box 35772
TYPE OF INSTALLATION
Extension Wall Mounting
Floor Mounting
Wall Mounting
88
product 35000 Series
HEAVY DUTY MAGNETIC DOOR HOLDER FIRE RATED WITH EXTENSION
PRODUCT DESCRIPTION
Fire and smoke door magnetic holder, 40kg
holding force, titanium alloy surface finished,
elegant appearance. Installed on fire and smoke
doors in projects where doors are required to be
held in the open position for both pedestrian and
general traffic, the devices have to be linked into a
buildings fire/smoke alarm system.
When an alarm occurs, power is removed from the
devices and the doors are returned to the closed
condition, preventing the spread of fire and/or
smoke to other areas. The devices are fire tested
to a rating of 4 hours and are supplied either
12 or 24VDC.
35000 series
Technical DETAILS
PART No.
35770/150/S
35771/150/S
Heavy duty 150mm extension
wall mount magnetic door holder
function
holing force
VOLTAGE/CURRENT
35771/300/S
Heavy duty 300mm extension
wall mount magnetic door holder
Up to 40kg
12VDC/100mA
size
24VDC/50mA
12VDC/100mA
D= 207 x W= 90 x H= 90mm
PART No.
35770/150/90
35771/150/90
holing force
24VDC/50mA
D= 355 x W= 90 x H= 90mm
35770/300/90
Heavy duty 150mm 90° extension, wall
& floor mount magnetic door holder
function
VOLTAGE/CURRENT
35770/300/S
35771/300/90
Heavy duty 300mm 90° extension, wall
& floor mount magnetic door holder
Up to 40kg
12VDC/100mA
size
24VDC/50mA
D= 117 x W= 90 x H= 176mm
Product FEATURES
•
Fire rated
•
Up to 40kg holding force
•
12 and 24VDC options
•
Floor mount and wall mount options
•
2 year warranty
12VDC/100mA
24VDC/50mA
D= 117 x W= 90 x H= 324mm
89
new generation electric and electronic locking
Product Dimensions and Installation
Wall Mount R40PCH-12/24
35770/300/s
35771/300/s
35770/150/s
35771/150/s
Floor Mount R60PCV-12/24
35700/300/90
35771/300/90
35770/150/90
35771/150/90
TYPE OF INSTALLATION
Extension Wall Mounting
Floor Mounting
Wall Mounting
special locking devices
Electromechanical Security
91
new generation electric and electronic locking
features
part no.
PP
Battery Operated Keyless Entry Device
RF15
92
fes110-30
High Security Electric Dead-Lock Strike
94
fes110-40
High Security Electric Custodial Strike
Fes112
96
92
product RF15
BATTERY OPERATED KEYLESS ENTRY DEVICE FOR HOME & OFFICE
PRODUCT DESCRIPTION
The RF15 is a battery operated stand alone electric
strike with keyless entry options that can also retrofit
in combination with existing standard surface RIM
mount dead-latches.
All circuitry and power is located within the strike
housing and therefore eliminating the need to run
any cable to a power supply or the strike. The strike
can be activated using a remote key fob and/or
by remote controlled wireless keypad. The signal
releases the keeper allowing the door to be pushed
or pulled open. The keeper will remain unlatched
for a pre-determined time. Up to 7000 operations
on standard AA batteries.
The package of the RF15 contains,
1.
2.
3.
1 x Battery operated strike
2 x Key fobs
1 x Key pad
rf15
Technical DETAILS
PART No.
RF15
Function
Battery operated keyless entry via keyless code-pad and/or remote control
Holding Strength &
Durability
Up to 500kg
Power supply
4 AA Batteries
APPROVALS
CE
C-Tick
Fire rated in accordance with AS1905.1.2005 Part 1 to up to 4hours on fire door assemblies
Environmental
Operational Temperature Range -5°C to +60°C
Strength
Meeting Australian Standard AS4145.2
Static Strength S6
Impact Strength S8
Product FEATURES
•
Wireless Keypad and Remote Control Key-Fob
•
Highly secure Rolling Code Technology
•
Installed with standard mechanical deadlatch
•
DIY Installation in minutes
•
Mechanical Key Override (on mechanical door lock)
•
Smart power management and low battery Indicator
•
1 year warranty
93
new generation electric and electronic locking
Product Dimensions and Installation
ORDER DETAILS
PART No.
Product description
RF15
Battery Operated Strike, 1 Keypad, 2 Keyfobs
RF15F
Key FOB
RF15P
Key PAD
94
product FES110
HIGH SECURITY ELECTRIC DEAD-LOCK STRIKE
PRODUCT DESCRIPTION
The FES110 series dead - lock electric door strike
release mechanism has been designed to provide
door access control while maximising security to a
door assembly fitted with square bolt deadlocks.
The FES110 monitors both door lock tongue and
internal locking of the strike. The device is supplied
in 12VDC or 24VDC, 2 year warranty.
fes110
Technical DETAILS
PART No.
FES110-30-12PTL/24PTL
FES110-40-12PTR/24PTR
Function
Power To Lock
Power To Release
Holding Strength
Up to 500kg
VOLTAGE/CURRENT
12VDC/900mA 24VDC/450mA
APPROVALS
2 hour fire rated and S.C.E.C. Approved
MONITORING
Lock bolt and locking solenoid
size
L= 306 x W= 32 x H= 58mm
Product FEATURES
•
Stainless steel faceplate and keeper
•
Holding strength of up to 500kg
•
2 year warranty
•
12 or 24VDC operation (has to be specified)
•
Monitoring Lock Status (LSS) and Door Status (DSS)
•
Fire rated to up to 2hours
•
PTO and PTR version available
95
new generation electric and electronic locking
15.5
7.3
306.0
293.0
65.0 50.0
58.0
31.4
3.0
52.8
274.0
Product Dimensions and Installation
ORDER DETAILS
PART No.
Product description
FES110-30-12PTL
FES110 Strike 12Volt Power To Lock
FES110-30-24PTL
FES110 Strike 24Volt Power To Lock
FES110-40-12PTR
FES110 Strike 12Volt Power To Release
FES110-40-24PTR
FES110 Strike 24Volt Power To Release
96
product FES112
HIGH SECURITY ELECTRIC CUSTODIAL STRIKE
PRODUCT DESCRIPTION
The FES112 is purposely designed for heavy duty
high security applications where superior holding
strength is required, such as detention centres,
correctional facilities and the like. The Strike works
in conjunction with a heavy duty double throw
deadlock. With a holding force in excess of 1000kg,
multiple monitoring functions and multi-voltage
regulation, the FES112 is the perfect locking device
for a variety of high security installations and
a viable solution for either new or retrofit high
security projects. The device is supplied with a
series 2 to series 3 simple change over switch.
Series 3 configuration provides the device with
door position monitoring, in this configuration the
FES112 cannot be secured until the door is in the
closed position and the lock monitoring tongue is
depressed.
FES112
Technical DETAILS
PART No.
FES112
Function
Power To Open (Fail Secure)
Holding Strength
More than 1000kg
VOLTAGE/CURRENT
Multi Voltage 12-30VDC
12VCD, 1.5A current draw
24VCD, 0.75A current draw
MONITORING
Strike Jaws. Door Lock Bolt Status Sensor
Door Position Reed Switch
Strike Plate Removed (Anti-Tamper)
-20°C to +60°C
temperature range
lock dead bolt
dimension
Fully extended = 33-36mm
Width = 10-17mm Height = 57-59mm
Product FEATURES
•
Stainless steel faceplate and keeper
•
Ultra high holding force in excess of 1000kg
•
Full monitoring (strike jaws, lock position, door position and cover plate)
•
Multi Voltage operation 12-30VDC
•
Smart Electronics, one lock for several applications (Revisions)
•
Fail Secure operation
•
Body, high grade tooling steel hardened to 60 Rockwell
•
Jaws, Molybdenum coated hardened steel
•
Change over switch series 2 or 3
97
new generation electric and electronic locking
Product Dimensions and Installation
12.3
52.0
99.0
272.0
335.0
140.0 338.0
335.0
48.0
17.0
99.0
7.5
51.0
67.0
92.5
51.0
ORDER DETAILS
PART No.
Product description
FES112
High Security Dead Bolt Strike FES112 Series NEW Electronics Rev.2 &3 selectable
5.5
49.0
NOTES
new generation electric and electronic locking
WALKING GENTLY
ON OUR PLANET
This publication is produced on stock from well managed forrest and printed using vegetable based inks
Version: ac/mob 02.13