‫اﻟﺴ ــﻴﺮة اﻟﺬاﺗﻴ ـ ــﺔ‬
‫‪7B‬‬
‫ﻟﻠﺴﻴﺪ اﻷﺳﺘﺎذ اﻟﺪﻛﺘﻮر ﻣﺼﻄﻔﻰ ﻋﺒﺪ اﻟﻨﺒﻰ ﻋﺒﺪ اﻟﺮﺣﻤﻦ‬
‫اﻻﺳﻢ ‪ :‬ﻣﺼﻄﻔﻰ ﻋﺒﺪ اﻟﻨﺒﻰ ﻋﺒﺪ اﻟﺮﺣﻤﻦ أﺣﻤﺪ‬
‫ﺗﺎرﻳﺦ اﻟﻤﻴﻼد‪1962 /9 /4 :‬‬
‫اﻟﺤﺎﻟﺔ اﻻﺟﺘﻤﺎﻋﻴﺔ‪ :‬ﻣﺘﺰوج ‪ 3 +‬أﻃﻒال‬
‫اﻟﻌﻨﻮان‪ 24 :‬ش اﻟﺴﺎدات – اﻟﺨﺸﺎﺑﺔ‪ -‬اﻟﻤﻨﻴﺎ‬
‫ﺑﺮﻳﺪ اﻟﻜﺘﺮوﻧﻰ‪:‬‬
‫‪E-mail malrahman1962@ hotmail.com‬‬
‫ﻣﺤﻤﻮل‪0106533441 :‬‬
‫اﻟﺪرﺟﺔ اﻷﻛﺎدﻳﻤﻴﺔ‪ :‬اﺳﺘﺎذ ﺑﻘﺴﻢ ﻫﻨﺪﺳﺔ اﻹﻧﺘﺎج واﻟﺘﺼﻤﻴﻢ ‪ -‬ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‪.‬‬
‫اﻟﺪرﺟﺎت اﻟﺠﺎﻣﻌﻴﺔ‪ :‬ﺑﻜﺎﻟﻮرﻳﻮس ﻫﻨﺪﺳﺔ اﻹﻧﺘﺎج واﻟﺘﺼﻤﻴﻢ ‪ 1985‬ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‪.‬‬
‫ﻣﺎﺟﺴﺘﻴﺮ ﻫﻨﺪﺳﺔ اﻹﻧﺘﺎج واﻟﺘﺼﻤﻴﻢ ‪ 1990‬ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‪.‬‬
‫دﻛﺘﻮراﻩ اﻟﻔﻠﺴﻔﺔ ﻫﻨﺪﺳﺔ اﻹﻧﺘﺎج واﻟﺘﺼﻤﻴﻢ ‪ 1995‬ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‪.‬‬
‫اﻟﺖرﻳﺦ اﻟﻮﻇﻴﻔﻰ‪:‬‬
‫ا‬
‫‪ 1990- 1985‬ﻣﻌﻴﺪ ﺑﻘﺴﻢ ﻫﻨﺪﺳﺔ اﻹﻧﺘﺎج واﻟﺘﺼﻤﻴﻢ ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‪.‬‬
‫‪ 1993 -1990‬ﻣﺪرس ﻣﺴﺎﻋﺪ ﻫﻨﺪﺳﺔ اﻹﻧﺘﺎج واﻟﺘﺼﻤﻴﻢ ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‪.‬‬
‫‪ 1995 -1993‬ﺑﺎﺣﺚ ﺑﻤﺮﻛﺰ ﻋﻤﻠﻴﺎت اﻟﺒﻼﺳﺘﻴﻚ ﺑﺠﺎﻣﻌﺔ ﻓﻠﻮرﻳﺪا ‪ -‬أﻣﺮﻳﻜﺎ‪.‬‬
‫‪ 2000- 1995‬ﻣﺪرس ﺑﻘﺴﻢ ﻫﻨﺪﺳﺔ اﻹﻧﺘﺎج واﻟﺘﺼﻤﻴﻢ ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‪.‬‬
‫‪ 2005 -2000‬اﺳﺘﺎذ ﻣﺴﺎﻋﺪ ﺑﻘﺴﻢ ﻫﻨﺪﺳﺔ اﻹﻧﺘﺎج واﻟﺘﺼﻤﻴﻢ ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‪.‬‬
‫‪2005‬‬
‫اﺳﺘﺎذ ﺑﻘﺴﻢ ﻫﻨﺪﺳﺔ اﻹﻧﺘﺎج واﻟﺘﺼﻤﻴﻢ ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‪.‬‬
‫‪2009‬‬
‫ﻋﻀﻮ اﻟﻤﻬﻤﺔ اﻟﻌﻠﻤﻴﺔ ﺑﺠﺎﻣﻌﺔ دوﺷﻴﺸﺎ‪ -‬اﻟﻴﺎﺑﺎن‬
‫‪2010‬‬
‫وﻛﻴﻞ ﻛﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ﻟﺸﺌﻮن اﻟﺘﻌﻠﻴﻢ و اﻟﻄﻼب ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‪.‬‬
‫اﻟﺨﺒﺮات و اﻟﻌﻀﻮﻳﻪ‬
‫‪ -1‬ﻋﻀﻮ ﻣﺠﻠﺲ ﻗﺴﻢ ﻫﻨﺪﺳﺔ اﻻﻧﺘﺎج و اﻟﺘﺼﻤﻴﻢ ﺑﺠﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ ﻣﻨﺬ ‪1995‬‬
‫‪ -2‬ﻋﻀﻮ ﻣﺠﻠﺲ ﻛﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ﺑﺠﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‬
‫‪ -3‬ﻋﻀﻮ اﻟﻮﺣﺪة اﻻﺳﺘﺸﺎرﻳﺔ ﺑﻜﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ﺑﺠﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ ﻣﻨﺬ ‪1995‬‬
‫‪ -4‬ﻋﻀﻮ ﺣﻤﻌﻴﺔ اﻟﺘﺮاﻳﺒﻮﻟﻮﺟﻰ اﻟﻤﺼﺮﻳﺔ ﻣﻨﺬ ﻋﺎم ‪1998‬‬
‫‪ -5‬ﻣﺪﻳﺮ ﻣﺮﻛﺰ اﻟﺤﺎﺳﺐ اﻵﻟﻰ ﺑﺠﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ ﻓﻰ اﻟﻔﺘﺮة ﻣﻦ ‪2002- 2000‬‬
‫‪ -6‬ﻋﻀﻮ ﻣﺠﻠﺲ ادارة ﻣﺮﻛﺰ اﻟﺤﺎﺳﺐ اﻵﻟﻰ ﺑﺠﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ ﻓﻰ اﻟﻔﺘﺮة ﻣﻦ ‪2002-2000‬‬
‫‪ -7‬رﺋﻴﺲ ﻟﺠﻨﺔ ﺷﺌﻮن اﻟﺘﻌﻠﻴﻢ واﻟﻄﻼب ﺑﻜﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‬
‫‪-8‬ﻣﺪﻳﺮ ﻣﺮﻛﺰ ادارة ﻧﻈﻢ اﻟﻤﻌﻠﻮﻣﺎت ﺑﺠﺎﻣﻌﺔ اﻟﻨﻴﺎ ﺧﻼل ﻋﺎم ‪2009‬‬
‫‪ -9‬ﻋﻀﻮ ﻣﺠﻠﺲ وﺣﺪة اﻻﻧﺘﺎج ﺑﻜﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‪.‬‬
‫‪ -10‬رﺋﻴﺲ ﻟﺠﻨﺔ اﻟﺸﺌﻮن اﻟﻤﺎﻟﻴﺔ و اﻻدارﻳﺔ ﺑﻤﺸﺮوع اﻟﺘﻄﻮﻳﺮ اﻟﻤﺴﺘﻤﺮ و اﻟﺘﺄﻫﻴﻞ ﻟﻼﻋﺘﻤﺎد ﻣﻨﺬ‬
‫‪2010‬‬
‫‪ -11‬اﺳﺘﺸﺎرى اﻟﺘﺤﻜﻴﻢ اﻟﺘﺠﺎرى اﻟﺪوﻟﻰ ﻣﻨﺬ ‪2010‬‬
‫ﺑﻌﺾ ﻣﻦ اﻷﻧﺸﻄﺔ اﻻﺳﺘﺸﺎرﻳﺔ ‪:‬‬
‫‪ -1‬اﻟﻤﺴﺎﻫﻤﺔ ﻓﻰ اﻟﺘﻘﻴﻴﻢ اﻟﻔﻨﻰ ﻹﺻﻼح اﻷﺟﻬﺰة اﻟﻄﺒﻴﺔ ﺑﻤﺴﺘﺸﻔﻰ اﻟﻤﻨﻴﺎ اﻟﺠﺎﻣﻌﻰ‪.‬‬
‫‪ -2‬اﻻﺳﺘﺸﺎرات اﻟﻬﻨﺪﺳﻴﺔ ﻓﻰ ﻣﺠﺎل اﺧﺘﺒﺎرات اﻟﻤﻮاد ﺑﻜﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ‪ -‬ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‬
‫‪ -3‬اﻟﻤﺴﺎﻫﻤﺔ ﻓﻰ دراﺳﺎت اﻟﺠﺪوى اﻟﺨﺎﺻﺔ ﺑﺎﻟﻤﺸﺮوﻋﺎت اﻟﺼﻐﻴﺮة ﺑﺎﻟﺼﻨﺪوق اﻷﺟﺘﻤﺎﻋﻰ‪.‬‬
‫‪ -4‬اﻟﺘﻘﻴﻴﻢ اﻟﻔﻨﻰ ﻟﻤﺸﺮوﻋﺎت ﻣﻤﻮﻟﺔ ﻣﻦ اﻟﺒﻨﻚ اﻷﻫﻠﻰ اﻟﻤﺼﺮى ﻓﻰ ﺗﺤﺪﻳﺚ اﻟﺼﻨﺎﻋﺔ‪.‬‬
‫اﻟﻤﻘﺮارات اﻟﺘﻰ ﺗﻢ ﺗﺪرﻳﺴﻬﺎ‪:‬‬
‫اﺣﺼﺎء ﻫﻨﺪﺳﻰ‪ -‬ﺗﻨﻈﻴﻢ ﺻﻨﺎﻋﻰ‪ -‬ﺿﻴﻂ ﺟﻮدة‪ -‬ﺗﺼﻤﻴﻢ أﺟﺰاءاﻟﻤﺎﻛﻴﻨﺎت ‪ -‬ﺗﺼﻤﻴﻢ ﻣﺎﻛﻴﻨﺎت‪-‬ﻫﻨﺪﺳﺔ‬
‫اﻧﺘﺎج‪-‬اﺣﺘﻜﺎك وﺗﺰﻳﻴﺖ و ﺑﺮى ‪ -‬ﻣﺘﺮوﻟﻮﺟﻴﺎ اﻟﻌﻤﻠﻴﺎت – ﻣﻘﺎوﻣﺔ ﻣﻮاد ‪ -‬ﺗﺤﻠﻴﻞ اﺟﻬﺎدات‪-‬ﺗﻜﻨﻮﻟﻮﺟﻴﺎ‬
‫اﻟﻠﺪاﺋﻦ‪-‬ﺗﺸﻜﻴﻞ ﻣﻌﺎدن ‪.‬و ذﻟﻚ ﻓﻰ ﻣﺮﺣﻠﺘﻰ اﻟﺒﻜﺎﻟﻮرﻳﻮس و اﻟﺪراﺳﺎت اﻟﻌﻠﻴﺎ‪.‬‬
‫اﻟﺒﺮاﻣﺞ اﻟﺨﺎﺻﺔ ‪:‬‬
‫‪ - 1‬اﻟﺤﺼﻮل ﻋﻠﻰ ﺷﻬﺎدة اﻟﺘﺄﻫﻴﻞ اﻟﺘﺮﺑﻮى ﻣﻦ ﻛﻠﻴﺔ اﻟﺘﺮﺑﻴﺔ‪-‬ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ‬
‫‪ - 2‬اداء اﻟﺪورة اﻟﺘﺪرﻳﺒﻴﺔ ﻓﻰ اﻟﺠﻮاﻧﺐ اﻟﻘﺎﻧﻮﻧﻴﺔ ﻓﻰ اﻟﺠﺎﻣﻌﺎت‬
‫‪ - 3‬اداء اﻟﺪورة اﻟﺘﺪﻳﺒﻴﺔ ﻓﻰ اﻟﻤﻮﺿﻮﻋﺎت اﻟﺨﺎﺻﺔ ﺑﺎﻟﺘﺪرﻳﺲ اﻟﺠﺎﻣﻌﻰ‬
‫‪ - 4‬اداء اﻟﺪورة اﻟﺘﺪﻳﺒﻴﺔ ﻓﻰ رﻋﺎﻳﺔ اﻟﺸﺒﺎب ﻓﻰ اﻟﺠﺎﻣﻌﺎت‬
‫‪ - 5‬اداء اﻟﺪورة اﻟﺘﺪﻳﺒﻴﺔ ﻓﻰ آداب و أﺧﻼﻗﻴﺎت اﻟﻤﻬﻨﺔ ﻓﻰ اﻟﺠﺎﻣﻌﺔ‬
‫‪ - 6‬اﻟﺤﺼﻮل ﻋﻠﻰ ﺷﻬﺎدة اﻟﺘﺤﻜﻴﻢ اﻟﺘﺠﺎرى اﻟﺪوﻟﻰ‬
‫اﻟﻤﺸﺎرﻛﺔ ﺑﺎﺑﺤﺎث ﻓﻰ اﻟﻤﺆﺗﻤﺮات اﻟﻌﻠﻤﻴﺔ‪:‬‬
‫‪ -1‬ﻣﺆﺗﻤﺮ ‪ Antic Conference, San Francisco,‬ﰱ ﻣﺎﻳﻮ ‪ – 1994‬اﻟﻮﻻﻳﺎت اﳌﺘﺤﺪة اﻻﻣﺮﻳﻜﻴﺔ‪.‬‬
‫‪ -2‬ﻣﺆﺗﻤﺮ ‪ ICCE/3 Conference, New Orleans,‬ﰱ ﻳﻮﻟﻴﻪ ‪ -1996‬اﻟﻮﻻﻳﺎت اﳌﺘﺤﺪة اﻻﻣﺮﻳﻜﻴﺔ‪.‬‬
‫‪-3‬ﻣﺆﺗﻤﺮ‬
‫‪Tribology, Budapest,‬‬
‫‪ Conference of‬ﰱ ﺳﺒﺘﻤﱪ ‪– 1996‬ﺠﻤﻟﺮ‬
‫‪-4‬ﻣﺆﺗﻤﺮ ‪ ICCE/4 Conference, Hawaii,‬ﰱ ﻳﻮﻟﻴﻪ ‪ - 1997‬اﻟﻮﻻﻳﺎت اﳌﺘﺤﺪة‬
‫اﻻﻣﺮﻳﻜﻴﺔ‪.‬‬
‫‪ -5‬ﻣﺆﺗﻤﺮ‬
‫‪ Development, Ain Shams University, Cairo,‬ﰱ اﺑﺮﻳﻞ ‪ -1998‬ﻣﺼﺮ‬
‫‪Fifth International Conference on Production Engineering and Design for‬‬
‫‪ -6‬ﻣﺆﺗﻤﺮ‬
‫‪ MICATE’99, Minia University, Minia,‬ﰱ ﻣﺎرس ‪ – 1999‬ﻣﺼﺮ‪.‬‬
‫‪First International Conference for Advanced Trends in Engineering,‬‬
‫‪ -7‬ﻣﺆﺗﻤﺮ ‪ Tribology on the Third Millenium Conference, Ladek Zdroj,‬ﻓﻰ ﺳﺒﺘﻤﺒﺮ‬
‫‪ – 2002‬ﺑﻮﻟﻨﺪا‬
‫‪ -8‬ﻣﺆﺗﻤﺮ اﻻﺳﺘﺜﻤﺎر اﻟﻤﻨﻌﻘﺪ ﻓﻰ ﻛﻠﻴﺔ اﻟﻬﻨﺪﺳﺔ ﺟﺎﻣﻌﺔ اﻟﻤﻨﻴﺎ ﻓﻰ ‪ 2007‬ﻓﻰ اﻟﻤﻨﻴﺎ ‪.‬‬
‫‪ -9‬ﻣﺆﺗﻤﺮ اﻟﻄﺎﻗﺔ اﻟﺪوﻟﻰ ﻓﻰ اﺳﻮان ﻓﻰ ‪ 2008‬ﻓﻰ اﺳﻮان‪.‬‬
‫‪ – 10‬ﻣﺆﺗﻤﺮ‬
‫‪ICCS15, 15th International Conference on Composite‬‬
‫‪ 2009Structures,‬ﻓﻰ اﻟﺒﺮﺗﻐﺎل‪.‬‬
‫اﻻﺷﺮاف ﻋﻠﻰ اﻟﺮﺳﺎﺋﻞ اﻟﻌﻠﻤﻴﺔ‪:‬‬
‫ﺗﻢ اﻻﺷﺮاف ﻋﻠﻰ ﻋﺪد ‪ 12‬رﺳﺎﻟﺔ ﻣﺎﺟﺴﺘﻴﺮ و دﻛﺘﻮراﻩ و اﻧﻬﺎﺋﻬﺎ و ﻣﻨﺎﻗﺸﺘﻬﺎ‪ .‬و ﺟﺎرى اﻻﺷﺮاف ﻋﻠﻰ ﻋﺪد‬
‫‪ 4‬رﺳﺎﺋﻞ اﺧﺮى‪.‬‬
‫اﻟﻨﺸﺮ اﻟﻌﻠﻤﻰ ‪:‬‬
‫ﺗﻢ ﻧﺸﺮ ﻋﺪد ‪ 32‬ﺑﺤﺚ ﻋﻠﻤﻰ ﻓﻰ اﻟﻤﺠﻼت و اﻟﺪورﻳﺎت اﻟﻌﻠﻤﻴﺔ اﻟﻌﺎﻟﻤﻴﺔ و اﻟﻤﺤﻠﻴﺔ اﻟﻤﺤﻜﻤﺔ و آﺧﺮﻫﺎ‬
‫ﺗﻢ ﻧﺸﺮﻩ ﻓﻰ ﻣﺠﻠﺔ ‪ Composite Part A, Applied Science and Manufacturing,.‬ﻓﻰ ﻣﺎﻳﻮ‬
‫‪.2010‬‬
1
“Wear and Friction of Styrene Butadiene Block
Copolymer Containing Recycled Rubber”, Antic Conference,
San Francisco, CA, USA, May 1994.
2
“Wear/abrasion Behavior of Recycled Plastic Lumber”,
Antic Conference, San Francisco, CA, USA, May 1994
3
"Filler (Glass Bead Reinforcement)", Polymeric Materials
Encyclopedia, Library of Congress Catalog, CRC Press, USA,
Vol. 4, 1996.
4
“Tribological Behavior of Recycled Glass Bead Filled
HDPE”, ICCE/3 Conference, New Orleans, USA, July 1996.
5
“Wear and Friction of HDPE/RGB Composites at Elevated
Temperature”, International
Conference
of
Tribology,
Budapest, 1996.
6
“Relationship Between the Mechanical Properties and
Tribological Performance of HDPE/RGB Composites”,
Bulletin of Faculty of Engineering, Minia University, Minia,
Egypt, Vol.15, No.1, June 1996.
7
“Annealing Effects on the Tribological Behavior of
Polypropylene/Mica Flakes Composite”, Bulletin of Faculty
of Engineering, Minia University, Minia, Egypt, Vol.16, No.1,
December 1997.
8
“Tribological Performance of Epoxy Resin/Thermoplastic
Blends”, ICCE/4 Conference, Hawaii, USA, July 1997.
9
“Effect of Tribosystem Parameters on Tribological
Performance of ABS/PP Blend Coatings”, Bulletin of
Faculty of Engineering, Minia University, Minia, Egypt, Vol.16,
No.1, December 1997.
10 “The Influence of Polypropylene Additives to Lubricated
Oil on the Wear and Friction of Metallic Pairs at Elevated
Temperatures”, Fifth International Conference on Production
Engineering and Design for Development, Ain Shams
University, Cairo, Egypt, April 28 - 30, 1998.
11 “Tribological Behavior of Short Steel Fibers Filled Epoxy
Resin”, Bulletin of the Faculty of Engineering, Assiut
University, Assiut, Egypt, Vol. 26, No. 2, July 1998.
12 “Frictional Behavior of Polymer - Polymer Sliding Pairs”,
Bulletin of the Faculty of Engineering, Assiut University, Assiut,
Egypt, Vol. 27, No. 1, January 1999.
13 “Tribological Behavior of PC/Glass Fiber Composite
Sliding Against Steel Surface”, Bulletin of the Faculty of
Engineering, Assiut University, Assiut, Egypt, Vol. 27, No. 1,
January 1999.
14 “Tensile Behavior of Textile Laminates Filled Recycled
Thermoplastics”, First International Conference for Advanced
Trends in Engineering, MICATE’99, Minia University, Minia,
Egypt, 14 -16 March, 1999.
15 “Fatigue Limit and Mechanical Properties Relationship of
Textile Laminates Filled Recycled Thermoplastics”, First
International Conference for Advanced Trends in Engineering,
MICATE’99, Minia University, Minia, Egypt,14 -16 March, 1999.
16 “Adhesion Shear Distribution of Textile Laminates Filled
Recycled Thermoplastic”, First International Conference for
Advanced Trends in Engineering, MICATE’99, Minia University,
Minia, Egypt, 14 -16 March, 1999.
17 “Effect of Interfacial Adhesion of Silica Additives on
Tribological Behavior of PET/Silica Composites”, Bulletin
of Faculty of Engineering, Minia University, Minia, Egypt, Vol.
20, No.1, July, 2001.
18 “Tribological Behavior of Relaxed Polypropylene/Carbon
Black Composites”, Bulletin of the Faculty of Engineering,
Assiut University, Assiut, Egypt, Vol. 29, No. 3, September
2001.
19 “Relaxation Behavior of Polypropylene/Carbon Black
Composites”, Journal of Engineering Sciences, Assiut
University, Egypt, Vol. 30, N0. 1, January 2002.
20 “Tribological Behavior of Acrylanitrile Butadiene Styrene
and Polypropylene Blends Sliding Against Thermoplastic
Surfaces”, Tribology on the Third Millenium Conference,
Ladek Zdroj, 23-26, Poland, 2002.
21 “Dependence
of
Tribological
Properties
of
Polyoximethylene on Melt Flow Index”, Journal of
Engineering Sciences, Assiut University, Egypt, Vol. 31, N0. 2,
April 2003.
22 “Wear and Friction Behavior of Metal Powder Filled Epoxy
Coatings”, Int. Journal of Applied Mechanics and Engineering,
Vol. 8, 2003.
23 “Effect of Ceramic Oxide Additives on the Tribological
Behavior of Polymeric Composites”, Bulletin of Faculty of
Engineering, Minia University, Minia, Egypt, Vol. 22, 2003
24 “Temperature Effects on Rheleogical and Tribological
Properties of Polyurethane/Mica Flakes Composites” ”,
Journal of Engineering Sciences, Assiut University, Egypt, Vol.
31, N0. 2, January 2004.
25 “Mechanical and Tribological behavior of HDPE with
Varying Injection Molding Parameters”, Journal of
Engineering Sciences, Assiut University, Egypt, Vol. 31, N0. 2,
March 2005.
26 "Wear Studies on Styrene-Butadiene Block Copolymer
Containing Recycled Rubber", Investment in Technology
Conference, Minia, May 2007, Egypt.
27 “Tribological and Viscoelastic Behavior of Butadiene
Rubber Modified Polystyrene (HIPS)”, ICEE, First
International Conference in Energy Engineering, Aswan, Dec.
2008, Egypt.
28 "Preparation and Mechanical Properties of Plain-Woven
CFRP Modified with Microfibrillated Cellulose" ICCS15,
15th International Conference on Composite Structures, FEUP,
Porto, 2009
29 "Effect of microfibrillated cellulose on mechanical properties of
plain-woven CFRP reinforced epoxy', Composite Structures,
Volume 92, Issue 9, August 2010, Pages 1999-2006
30 "Interfacial adhesion improvement of plain woven
carbon fiber reinforced epoxy filled with micro-fibrillated
cellulose by addition liquid rubber", Journal of Materials
Science, April (2010) 45:3841–3850
31 "A Study on mechanical properties of bacterial
cellulose/epoxy reinforced by plain woven carbon fiber
modified with liquid rubber", Composite Part A, Applied
Science and Manufacturing, May 2010.
32 “Statistical Analysis of the Injection Molded Product:
Dependence of Processing Parameters on Mechanical
Properties, Shrinkage and Density. Case of Study”, To be
published.