TABLE OF CONTENTS
SMPTE Fiber Cable ___________________________________________ 3
Composite Cables and Reelers ________________________________ 9
SMPTE Fiber Cable and Assemblies ____________________________ 4
Video and Audio Cables for HD-SDI ____________________________ 10
SMPTE Panels and Pigtails ___________________________________ 5
BNC 75 Ohm Connectors and Adapters, Crimp Tools ___________ 11
SMPTE Panels (Continued) ___________________________________ 6
Triax, Multicore and DT 12 ____________________________________ 12
SMPTE Accessories - Adapters, Caps, Boots _________________ 7
Tactical Fiber Cable __________________________________________ 13
SMPTE Accessories - Clean Kit, Fusion Splicer, Test Equip,
RF and Microwave Connectors ________________________________ 14
OpticalCon connectors ________________________________________ 8
Repair and Testing, System Design and Installation _____________ 15
COMPANY BIO
Nemal Electronics International, Inc. is a fully integrated manufacturer and distributor of a wide range of fiber optic and copper electronic cable,
connectors, cable assemblies, and interconnect products for broadcast, communications, data, and electronic control applications. In addition
to the products we manufacture, Nemal is an authorized distributor for many other major manufacturers of interconnect products including RFS
Cablewave Systems, Amphenol, Times Microwave, Lemo, Switchcraft, Neutrik, Trompeter, Audio Accessories, Allen Avionics, and General Cable.
In 1999, we established our first assembly and test facility for the then new Lemo SMPTE standard HDTV fiber optic connector. We have
participated in many of the largest HDTV connector installations in the world, including those at NBC, CNN, TV Globo in Brasil (Projac), LDS in Salt
SMPTE Fiber Camera Cable for studio, fixed installation, and mobile broadcast applications
• Available in standard and custom lengths, terminated with Lemo connectors
6 Versions available
FOCC24R - UL Riser rated (CMR-OF) for indoor use
FOCC24U - polyurethane jacket for outdoor use in extreme conditions
FOCC24 - standard flexible studio cord
FOCC24D - Double jacketed (12mm)
FOCC612 - “3-in-1” Stadium cable for fixed installation - (UL) CMR - OF
FOCC24S - Mini “Steadicam” cable (limited distance)
Nemal leads the industry with innovative and high performance SMPTE camera cable products. The choice of most major broadcast networks throughout the Americas, our SMPTE cables, assemblies, and adapters provide a total solution for your
HDTV camera interconnect systems.
[FOCC24]
9.2mm (.362”) outer diameter versions
Product Specifications:
Compliant with SMPTE 311 standards
Fiber: 2-single mode Corning 9/125 (blue and yellow), 900 micron tight buffered, bend tolerant fibers, 0.8db/km
4-20 awg (19/32 tc) power conductors (used in pairs as 2 conductors), max resistance 9.7 ohms/1000 ft
2-24 awg (7/32) data/signal conductors, max resistance 23.8 ohms/1000 ft
1-insulated 16 awg stranded steel central strength member
Overall fiber tape and tinned copper braid
Lake City, Univision, and many others. We offer a complete range of services for HDTV fiber installations including training, design, installation,
Part Number
and product sales.
Since 1977, Nemal has served thousands of customers throughout the world including all major U.S. broadcast networks, many Fortune
500 companies, numerous U.S. and foreign government agencies, and many others. Our customers include ABC, Cable and Wireless, CNN,
Ericsson, Hewlett Packard, HBO, IBM, Lockheed Martin, Motorola, NBC, Panasonic, CBS, Sony, TRW, TV Globo, the United Nations, and the
FOCC24 (Flex)
FOCC24R (Riser)
FOCC24U (Outdoor-Polyurethane)
Weight
Lbs/M kg/km
Suggested Applications
Jacket Type
Our standard flexible cable for Studio patch cords and
typical indoor/outdoor use.
Thermoplastic
Elastomer
89
132
UL Riser rated for indoor and fixed installation.
PVC UL (CMR-OF)
88
131
For mobile units and harsh environment
applications in high and low temperature.
Polyurethane
90
133
United States Navy.
Our factory, located in Miami, contains approximately 28,000 square feet of manufacturing space, and is capable of producing standard and custom
cables up to 30 mm (1.2”) in diameter. This facility includes a complete design and test laboratory as well as multiple extrusion lines, cabling,
12mm (.470”) diameter version-double jacketed
Our standard camera cable with an additional flexible jacket. This cable is ideal for use in rugged applications and
will not snag easily under camera skirts. Larger and heavier than our standard cables.
shielding, and special process equipment. This plant has received multiple approvals from UL (Underwriters Laboratories) for hundreds of cable
designs, and operates under a strict quality control system with frequent independent inspections.
Our main building, located in North Miami, houses our worldwide administrative headquarters. In this building, we stock more than 3000 cable and
connector products and also produce cable assemblies, patch panels and cable identification products. This facility contains approximately 14,000
Product Specifications:
Compliant with SMPTE 311 standards
4-20 awg (19/32 tc) power conductors (used in pairs as 2 conductors)
max resistance 9.7 ohms/1000 ft
2-24 awg (7/32) data/signal conductors, max resistance 23.8 ohms/1000 ft
1-insulated 16 awg stranded steel central strength member
Overall fiber tape and tinned copper braid
[FOCC24D]
square feet including our connector manufacturing operations and RF and microwave test laboratory. The laboratory includes separate network
analyzers for both 50 and 75 ohm testing from DC to as high as 40 GHZ. Production equipment in this facility includes multiple CNC machines and
Part Number
Fiber Attenuation
Jacket Type
0.8db/km max 1310nm
(2) Thermoplastic
Elastomer
secondary equipment, capable of manufacturing a wide range of precision connector, adapter, and fiber optic products. We have designed and
manufactured numerous special products to meet both market and individual customer requirements, and hold a US Patent on our field version of
FOCC24D
Weight
Lbs/M
kg/km
113
168
the industry standard DT12 audio connector.
Nemal do Brasil, Ltda., located in São Paulo, is our stocking facility and office in Latin America. At this location, established in 1996, we maintain
a wide variety of broadcast and communication interconnect products and manufacture cable assemblies for immediate delivery within Mercosur.
2
3
6.0 mm (.235”) Diameter Miniature Version for Steadicam
SMTPE Fiber Panels
Nemal design for use with Steadicam and other applications where size and flexibility are critical. The tinned
THREE SERIES AVAILABLE - 19” RACK MOUNT
copper braid provides mechanical strength and durability for lengths up to 1000 ft. (305 meters). Corning bend
Series 1 2 rack unit, 7 or 8 position, 6” deep, rear plane splice, 45 degree smpte breakout panel
tolerant fiber guarantees optimum performance.
Series 2 1 rack unit, (6 position) or 2 rack unit (8 position) high density modular panel
Product Specifications:
Series 3 2 rack unit, 7 or 8 position, 45 degree blank panel for truck i/o and studio bsp
Compliant with SMPTE 311 standards
Fiber: 2-single mode Corning 9/125 (blue and yellow), 900 micron tight buffered, bend tolerant fibers
* Modular or Fixed versions
Copper conductors: 2 x 22 awg stranded tinned and 2 x 24 awg stranded tinned
* Available with or without full enclosure
Cabled with aramid strength members
[FOCC245]
* Standard configurations available from stock
Overall tinned copper braid and fiber tape
Part Number
FOCC24S
[Modular Panel]
* Available blank, fully loaded, or partially loaded with blank covers
Fiber Attenuation
Jacket Type
0.8db/km max 1310nm
Thermoplastic
Elastomer
Weight
Lbs/M kg/km
32
* We design and manufacture custom variations of these panels to meet your requirements
_________________________________________________________________________________________________________________________________________
48
PART NUMBER SYSTEM FOR SERIES 1
FOPA - 100 - X (number of positions) - X (gender of SMPTE) - XX (fiber connector type) - X (type of
“3 in 1” version for Fixed (Stadium) Applications
electrical connector)
Series
Nemal design for fixed installations connecting 3 cameras with a single cable. 16 awg copper conductors provide
100
extended distance capability. Nemal manufactures a complete line of termination boxes, panels, breakouts, and
Number of Positions
accessories for use with this cable. Please see our FOPA Series Fiber Optic Panels.
7
Product Specifications:
8
Compliant with SMPTE 311 standards
Gender of SMPTE connectors
Fiber: 3 groups of 2-single mode Corning 9/125 (blue and yellow),
M - All positions male
900 micron tight buffered, bend tolerant fibers, pvc jacket
Copper conductors: 3 groups of
[FOCC612]
C - mixed (specify quantity of each)
2 x 16 awg stranded tinned (max 4.4 ohms/1000 ft)
Fiber Connector Type
2 x 24 awg stranded tinned, (max 27.7 ohms/1000 ft)
ST
Each group with overall foil shield and tinned copper drain wire
SC
Overall fiber tape and aramid strength members
Part Number
FOCC612
[Breakout Panel]
F - All positions female
LC
Fiber Attenuation
Jacket Type
0.8db/km max 1310nm
Thermoplastic
Elastomer
Jacket Diameter
Inch
mm
.56
14.2
Weight
Lbs/M
kg/km
135
202
FC
FS - no fiber connector - tails out for fusion splicing
Type of Electrical Connector
M - Molex
[SMPTE ST Panel]
C - Tyco CPC
_________________________________________________________________________________________________________________________________________
HDTV Fiber Optic Pigtails
As part of a complete HDTV camera system, the pigtail design allows for ease of installation and maintenance
by quickly adapting the hybrid cable to industry standard connectors. The pigtails are also available with
custom lead lengths, and as part of a complete panel.
[Inline Plug FUW]
[Inline Jack PUW]
[Panel Plug FMW]
[Panel Jack PBW]
FEATURES - PART NUMBERS: FO-PTP (PLUG) AND FO-PTJ (JACK)
SMPTE Cable Assemblies
* Substantially reduces on-site installation time and equipment requirements
(XXX) Connector 1 – XXXXXX (Cable Type) – (XXX) Connector 2 – XXX (length) – XX (FT/MT)
* Facilitates maintenance/replacement of SMPTE standard HDTV Connectors
_________________________________________________________________________________________________________________________________________
* 18” lead length to 2-ST and 1-CPC multi-pin connector (other connector types on request)
Nemal also manufactures SMPTE compliant adapters, patch panels, and tooling
* Available in plug (P) or jack(J) versionsng
[FO-PTP]
configurations
Lemo SMPTE Cable Mount Connectors:
4
5
[FOPA - 100-1]
HDTV SMPTE Camera Connector to ST Adapter
SERIES 1 (FOPA-100)
2 Rack Unit, 8 Position, 45 degree, enclosed SMPTE Breakout Panel
A rugged and economical solution for field or studio applications requiring use of existing standard fiber cable
(Rear Plane for external splicing) *see Part Number System for Series 1
with the SMPTE Hybrid HDTV Camera Connector. Also use to interconnect equipment with standard ST connectors in locations where only SMPTE Hybrid connectors are available. Available in male and female versions.
Active versions allow for use of remote power with Sony or Ikegami cameras.
SERIES 2 (FOPA-200)
1 or 2 Rack Unit, High Density enclosed Modular Panel
* Extremely durable and compact machined body, “D” flat to prevent rolling
Exclusive Nemal design for maximum flexibility and density - up to 12 positions in 2 - RU
* Recessed housing to protect fiber connectors
Modules for SMPTE hybrid connectors, Triax, and Neutrik OpticalCON - Interchange, add or delete modules as needed. 2 Rack Unit models
* Passive versions: (direct fiber interface from SMPTE connector to 2-ST connectors)
available in 45 degree
Part Number System for Frame FOPA200-X (Height)
P/N FOA-1F Female
[FOA-1M]
P/N FOA-1M Male
* Active versions: (include circuitry to interface with Camera CCU)
[FOPA - 200-1]
Size 1:1 Rack Unit 2:2 Rack Unit
Part Number System for Modules
Rear Fiber Connector
301 - SMPTE PLUG
ST
302 - SMPTE JACK
SC
303 - TRIAX PLUG
LC
304 - TRIAX JACK
FC
305 - OPTICALCON DUO
00-none
P/N FOA-1MA
Active Equipment
FOPA - XXX (connector type) - XX (rear fiber connector) - xx (straight or 45°)
Connector type
P/N FOA-1FA
* Media Converters-Fiber to BNC
* HD / SDI and 3G versions
* AC or battery powered
[Media Converter MVC]
* Field type or complete Rack Mount System
* Distribution Amplifiers
* DVI Extenders-up to 1500 meters
306 - BLANK COVER
[FOPA - 200-2]
[FOPA - 200-2-0]
* Multiplexers- 3G/HD/SD Video, Audio, Telephone, VOIP, Ethernet, and data via single-mode fiber
SMPTE Boots and Caps
* Protect connectors from damage and dust
* Provides critical strain relief to prolong cable life
* Available for inline plugs and jacks-(full overboot with attached cap) and for panel mount plugs and
[Boots and Caps]
jacks (cap only)
* Optional steel caps for extreme conditions
[Mod - FMW]
[Mod - OPT]
[Mod - TRX]
[Mod - PHW]
Description
Part Number
Boot and Cap for FGW Inline Plug
FOMB-1
Boot and cap for PUW Inline jack
FOFB-1
Cap for FMW/FXW Panel mount Plug
FODC-2
Cap for PBW/PEW/EDW Panel mount Jack
FODC-1
Steel cap for Plugs-with attachment strap
FOMC-2
Steel cap for Jacks-with attachment strap
FOMC-1
[Duo Box]
OPTICALCON Adapters and Breakouts
* Easily adapt Neutrik OpticalCon DUO and QUAD to ST, SC, FC, LC, and
other standard fiber optic connectors.
[FOPA-300]
* Available in fan-out (1 meter standard) or box style construction
SERIES 3 (FOPA-300)
2 Rack Unit, 7 or 8 position, 45 degree Blank Panel
Part Number System
Available fully loaded with pigtails or terminated cables.
XXX (DUO-QUAD)-XXX (FAN-BOX)-XX (ST, SC, FC, LC)
Part Number System FOPA - 300 - X (number of positions)
OPTICALCON Panel Receptacles
DUO - P/N NO2-4FDW-A
6
QUAD - P/N NO4FDW-A
[NO2]
[NO4]
7
Fiber Optic Fusion Splicer for HDTV SMPTE Cable
Composite Cables
User friendly, extremely versatile, and cost effective fusion splicing system for use with SMPTE fiber cable
(or choose one of our many standard stock products)
as well as almost all standard fiber connector types. Based on the industry leading Fujikura FSM Series,
We design and build to your exact requirements
-We manufacture a wide range of composite cables for all OB/Mobile and Studio applications (1000 ft mini-
this small, light weight unit is suitable for field or bench use. Custom Nemal adapters and holders make this
mum on special constructions)
unit compatible with ST, SC, FC, LC, APC, and other connectors, both single and multi-mode (50-62.5mm).
CHOOSE ANY NUMBER AND COMBINATION OF:
The splicer is microprocessor controlled, provides instantaneous readout of insertion loss, and includes a
-Fiber (single or multimode, bend insensitive) terminated with ST, LC, FC, SC, APC or Opticalcon
built-in shrink oven for fiber protection sleeves. Nemal also offers a complete termination kit including
-HD/SDI video coax (mini, standard RG59, RG6, RG7, or RG11 types) terminated in BNC
precision cleaver, strip tool, and consumables.
[Fusion Splicer]
* 15 second typical Splice cycle
* 0.02db nominal splice loss MM, 0.05 SM
-Power (12 to 24 awg conductors, optional shield with or without overall jacket)
* 5 Automatic modes for NZ, DS, NZDD, SM, and MM fibers
* Rugged field carrying case
-Ethernet (Cat5E stranded, Cat6)
* USB Terminal for data download
-Overall jacket-Exclusive Nemal TPR Flex or optional polyurethane for burial or extreme conditions
(125m cladding)
* Battery or AC powered
[SMTPE-TST]
SMPTE Fiber Field Test Set
[BC256P]
-Audio shielded pairs (analog, digital, line level or microphone)
Typical Composite Cables
Part Number
Fiber Components
Copper Components
Outer Dia In/mm
Ruggedized SMPTE Test Set is designed for harsh work conditions where handheld units are not appropriate.
BCF21P24
2-single mode
1 pr 24 awg shielded (wetline)
.235/6.0
The SMPTE Test Set utilizes a remote loopback unit for single ended testing of both optical fibers as well
BCF23P24
2-single mode
3 pr 24 awg ind. shielded
.290/7.3
as power for the built-in copper conductor tests. The set checks all 4 copper conductors for continuity and
BCF23P24-2C16
2-single mode
As above plus 1 pr 16 awg
.345/8.7
shorts as well as verifying the integrity of the grounding shield in the cable with simple pass/fail audible and
BC161PJ
NONE
1-RG6 plus 1 pr 22 awg shielded
.550/14.0
visual indicators. The main control unit houses the optical fiber power meter readout, copper conductor test
BC163PJ
NONE
1-RG6 plus 3 pr 22 awg ind. shielded
.560/14.2
indicators, and the SMPTE fixed plug connector. The Remote Unit contains the SMPTE fixed socket connector.
BC263PJ
NONE
2-RG6 plus 3 pr 22 awg ind. Shielded
.660/16.8
*Single test checks both fibers for loss and all 4 copper
conductors for continuity, short circuits and ground braid integrity
* Simple audible and visual pass/fail indicators for copper tests
* Designed for harsh environments in ruggedized housing
* Rechargeable NiMH batteries
* Dual single-mode capabilities, 1310nm & 1550nm wavelengths
Reel Capacity
P/N SMCKIT
This cleaning kit is ideal for both mobile units and studio applications. Use this kit to clean your LEMO and
Cable Type
standard fiber optic connectors and be sure that you have a contaminant-free endface. The following items
are included with this kit in a black zip-close bag.
• Electro-Wash
• Electro-Wash PX Fiber Optic Cleaner (ES810)
• 2.5mm Fiber Optic Swabs (48042F)
* Stackable and Available in a wide range of cable capacities
* Optional Casters and Mounting Plates (specific models)
SMPTE Cable Cleaning Kit
• QBE Cleaning System
Cable Reelers
MX
Pre-saturated
Wipes
(CP421)
• Lemo Alignment Tool (OPTIONAL-Order P/N
• 2.0mm Fiber Optic Swabs
[SMCKIT]
SMCKIT-LAT)
• Lint Free Precision Wipes (6704F)
Neutrik OpticalCON Fiber Optic Interconnect System
- Suggested maximum lengths
TAC4
SMPTE
9.5mm
TAC12
Empty
Weight
Dimensions H x L x W
Construction
Reel P/N
Feet
Meters
Feet
Meters
Feet
Meters
Lbs
KG
In
mm
GT235
325
100
N/A
N/A
N/A
N/A
KG
1.0
11.8 x 9.3 x8.1
300 x 235 x 205
Plastic
GT310
500
160
165
50
325
100
4.0
1.8
14.5 x 12.6 x 9.0
367 x 310 x 229
Plastic
GT380
1000
300
325
100
500
150
9.2
4.2
19.3 x 15.5 x 11.5
491 x 380 x 291
Plastic
HT385
1500
450
500
150
900
275
12.5
5.7
18.1 x 15.5 x 11.4
460 x 380 x 290
Metal
HT485
2000
600
650
200
1200
365
16.7
7.6
21.5 x 18.1 x 11.4
545 x 460 x 290
Metal
AV-2
2400
730
815
250
1500
450
24.2
11.0
20.5 x 20.0 x 16.0
520 x 508 x 406
Metal
CR400C
3300
1000
1630
500
2200
670
35.0
15.9
21.1 x 18.8 x 17.7
535 x 480 x 450
Metal
* Available in 2 (Duo), 4 (Quad), and Hybrid versions
* Complete modular system-chassis connectors-cable assemblies-breakouts
* Quickly and easily adapt to any fiber optic connector type
* Automatic dust protection-Rugged and User friendly
* SMPTE to OpticalCON adapter cables
[OpticalCon-LEMO]
[AV-2]
8
[CR400C]
[GT380]
[HT485]
9
Video and Audio Cables for HD | SDI
BNC Connectors for HD | SDI Applications
Key Features: 75 ohm Impedance
Available in factory standard 1000 ft rolls or in special lengths as required
High Performance with máximum flexibility
Available fully terminated per customer specifications
Compatible with industry standard connectors and tooling
Riser and plenum rated versions available
- Key Features: Available for most standard 75 ohm cables
- Use a single tool to crimp all 3 cable types
- Teflon insulation-captivated gold contact
- Easy grip body
- Fast termination using industry standard crimping tools
- Meet or exceed SMPTE 292 Specifications
Each individual connector package contains appropriate cable information as well as a diagram of strip dimensions. The knurled body design
Available in 10 colors at no extra cost
facilitates connector handling, while contact captivation insures proper contact placement. These products are in stock for immediate delivery.
[BNC Connectors]
[Digital Video Cables]
[Cable Performance]
Center
Cond
1191
23AWG
SBC
023”
Belden
Ref
1855A
1570
20AWG
SBC
.032”
1570F
22AWG
(7/29)
BC
1550F
1580
18AWG
SBC
.040”
1590
1585
VP
%
Dielectric
Gas Injected
FHDPE
Shielding
Foil+95%
TC braid
Jacket
Type
PVC
Jacket
Dia
in/mm
Weight/M
lbs/kg
160/.405
9.0/4.0
Capacitance
16.3
Nom. Attenuation db/100ft (MHZ)
Connector
Type
1
NE8092H
.4
10
1.2
270
500
5.4
7.5
1000
10.6
3000
18.7
4500
24.9
Foil+95%
TC braid
Gas Injected
FHDPE
80
(2) TC
braid
95%
PVC
242/6.2
43.5/19.8
17.0
NE8094H
.3
.9
5.0
7.2
10.4
20.4
28.3
1694A
Gas Injected
FHDPE
82
Foil+95%
TC braid
PVC
.275/7.0
23.0/10.5
16.3
NE8010H
.2
.7
2.8
4.1
5.9
10.6
14.8
14AWG
SBC
.064”
7731A
Gas Injected
FHDPE
85
Foil+95%
TC braid
PVC
.405/10.3
48.5/22.0
16.0
NE8089H
.2
.5
2.1
2.9
4.2
8.3
9.8
16AWG
SBC
.051
1794A
Gas Injected
FHDPE
84
Foil+95%
TC braid
PVC
.320/8.1
59lb/81kg
16.1/52.8
NE8095H
.02
0.48
2.4
3.45
4.88
9.07
11.52
PVC
.234/.5.9
17.6/8.1
16.3
NE8094H
.3
.9
3.9
5.3
7.7
13.5
18.1
Audio Cables
Nemal
P/N
10
Description
Cable Type
Belden Ref
Tooling
NE8010H
2065-10-9
1580 RG6
1694A
CT1000HD
NE8092H
2065-11-9
1191 MINI
1855A
CT1000HD
NE8094H
2065-2-9
1570 20GA
1505A
CT1000HD
NE8095H
2065-12-9
1585, RG7
7855A
CT1010HD
NE8060H
2065-8-9
1590, RG11
7731A
CT1020HD
NE8086H
2065-28-9
1195, RG179
179DT, 1520A
CT1030HD
75 Ohm BNC Adapters and Terminations
83
1505A
Gas Injected
FHDPE
83
Kings Ref.
[Audio Cables]
Digital Video Cables
Nemal
Part
No.
Part No.
Belden
Ref
Conductors
Shielding
et Type
Jacket Dia in/mm
Weight lb/1000ft
kg/km
Capacitance bet
cond-pf/ft pf/m
MC424P
Star Quad
Microphone Cable
1192A
4-19/36bc
85% TC braid
TPR 105C
.242/6.2
37/55
39/128
MC220R
Microphone
Cable-rugged flex
8412
2-20 awg
19/32tc
85% TC braid
TPR 105C
.260/6.6
47/70
30/98
2201A
Line level analog 1pr
8451
2-22awg 7/30tc
100% foil+ 22tc
drain
PVC 75C
.135/3.5
16/23
34/111
2201D
Line level digital 1pr
1800B
2-24awg 7/32tc
100% foil+ 24tc
drain
PVC 60C
.180/4.6
16/23
12/39
Part No.
Description
NE8327
Dimensions in(mm)
Length
Width
Jack-Jack Bulkhead
1.28 (32.5)
0.63 (16.0)
NE8329
“T” J-P-J
1.28 (32.5 )
1.06 (26.9)
NE8331
Plug-Jack Angle
0.90(22.9 )
1.03 (26.0)
NE8333
Jack-Jack
1.28 (32.5 )
0.44 (11.2)
TR75B-75
Termination
1.28 (32.5 )
0.56 (14.2)
TR75B-75
BNC Jack-F Plug
1.28 (32.5)
0.56 (14.2)
NE920-75
F Jack-BNC Plug
1.50 (38.1)
0.47 (11.9)
[CT1000HD]
[NE912]
[NE920]
[NE8327]
[NE8329]
[NE8331]
[NE8333]
[TR75B]
11
[Tactical Fiber]
37 - Pin (DT12) Connector for Field and Studio Applications
Tactical Fiber Cable (2, 4, 6, 8 and 12 Fiber)
The industry standard in DT-12 connectors-US Patent Des. 420644
Nemal fiber optic tactical cable consists of a rugged, flexible polyurethane outer
FEATURES
PART NUMBER - DESCRIPTION
-
Optional Steel insert (male) for superior crush resistance
NE3700M* Male 37 pin connector
-
Extremely rugged machined body
NE3710F Female 37 pin connector
-
Low Profile, reduced weight version
NE3720MP Male chassis receptacle
-
Weatherproof insert
NE3730FP Female chassis receptacle
-
Patented Set Screw design prevents insert rotation
NE3740MC Male cap
-
Wire retention on dust caps
NE3750FC Female cap
-
Ease of Termination
*ADD “S” for steel insert
-
Wide variety of Strain Relief options
-
Completely compatible with existing designs
-
For use with Nemal 12PR22FC, Belden 9768, and other
jacket and either two or four 900um tight-buffered fibers surrounded by aramid
yarn and an aramid ripcord.
The jacket is pressure extruded over the strength member which allows the pulling
device to be attached directly to the cable’s outer jacket. This will transfer the
[NE3700MS]
pulling force directly to the strength members with no slippage.
The dielectric cable construction requires no grounding and its smaller diameter
and low bend radius allow easy installation in space-constrained areas. In addition, the Singlemode and 50um OM3 versions of the cable utilize
advanced bend insensitive fibers. This also allows the fan-outs to benefit from a smaller diameter bend radius.
Mechanical Characteristics
Min Bend Radius, Installation (mm)
comparable cables
Male to Female Assembly Part Number JFK37-XXX (length)-XX (FT or MT)
Fanouts: Male DT12 to 12 female XLR-FO37M
Female DT12 to 12 male XLR-FO37F
Breakout boxes-available with 12 or 24 (parallel) outputs, and with either male, female or both DT12 inputs (through boxes)
Triaxial Camera Cables
Storage Temperature
-57C to +85 C
Min Bend Radius, Operation (mm)
29 / 29 / 31 / 33 / 35
Operating Temperature
-46 C to+71 C
Nominal Outer Diameter (mm)
5.8 / 5.8 / 6.1 / 6.5 / 7.0
Weight: (Lbs/Km)
64 / 66 / 72 / 76 / 80
Fiber Count
2, 4, 6, 8 & 12
Impact Resistance
IA/EIA - 455-25C/6.6lb-f
Flexibility
TIA/EIA - 455-104A, GR-20-CORE/Tensile Mass 5kg, 20 x cable diameter
Dielectric Strength
Member
Aramid Yarn
Max Tensile Strength, Short Term
TIA/EIA - 455-33B,ICEA S-83-696/300lb-f /100 meters
Max Tensile Strength, Long Term
Nemal
P/N
Center Cond
Belden
Ref
Dielectric
VP %
Shielding
Jacket
Type
Jacket Dia
in/mm
Lb/1000
ft kg/km
Capacitance
pf/ft pf/m
Connector
Type
1835
20SBC
1856A
FHDPE
83%
2-95%
BC
.360/9.5
TPR
80/119
16.3/53
7703-2
7705-2
.360/9.5
TPR
85/126
17.5/56
7703-2
7705-2
1835F
19/34BC
1857A
FHDPE
79%
2-95%
BC
1835P
20SBC
N/A
FHDPE
83%
2-95%
BC
.360/9.5
PUR
80/119
16.3/53
7703-2
7705-2
1820
19/.0142BC
1858A
FHDPE
79%
2-95%
BC
520/13.2
TPR
136/202
1835
7703-3
7705-3
.520/13.2
PUR
136/202
1835
7703-3
7705-3
.234/5.9
TPR
32/48
1835
NE8576
NE8577
1820P
19/.0142BC
N/A
FHDPE
79%
2-95%
BC
1839
19/37BC
N/A
FHDPE
82%
Foil
2-95%
Cable Characteristics
TIA/EIA - 455-33B, ICEA S-83-696/90lb-f /100 meters
Ripcord
1
Outer Jacket Material
Thermoplastic
Polyurethane
Outer Jacket Color
Black
Optical Characteristics
[Triax 1820]
OS2
OM1
OM3
Core Size
9um
62.5um
50um
Wavelengths
9um
850nm/1300nm
50um
Max. Attenuation
0.5 dB/Km
3.5 dB/Km
3.5 dB/Km
Bandwidth
-
200 MHz@ 850nm
1500 MHz@850nm
Link Len (10Gb/s)
-
30 mtrs
300 mtrs
Multicore (26 pin) Camera Cable
Ordering Information
Fiber Count
*Nemal P/N CC2620D is fully compatible with Sony standard broadcast cameras utilizing a 26-pin interface.
Part Numbers - *Indicates fibers are Bend Insensitive Insensitive Fibers
* OS2
OM1 (62.5um)
* OM3 (50um)
*Exclusive Nemal strain relief ensures long service life and ease of repair, if necessary
2-Fiber
TAC2B
TAC2B-OM1
TAC2B-MM
Assembly Part Number: CC2620D-XXX (Length in Meters)
4-Fiber
TAC4B
TAC4B-OM1
TAC4B-MM
6-Fiber
TAC6B
TAC6B-OM1
TAC6B-MM
*Meets Performance standards for SDI signals
[CC2620]
12
Temperature Range
58 / 58 / 61 /65 / 70
8-Fiber
TAC8B
TAC8B-OM1
TAC8B-MM
12-Fiber
TAC12B
TAC12B-OM1
TAC12B-MM
13
RF and Microwave Connectors
*We manufacture custom assemblies, patch cords, and adapters to order, usually within 48 hours
*These connector series are all available in cable and panel mount plugs and jacks, receptacles, and in-series adapters
Type N Series
DC-11GHZ (18GHZ versions available)
Description
Part No
Impedance: 50 Ohm (75 Ohm available)
Plug-RG213
NE7002
Voltage Rating: 1000 VRMS
Plug-RG214
NE7010
Base Metal: body: Brass (Stainless steel available)
Plug-LMR240
UG536B
Plating: body: Nickel or Silver contact: silver or gold
Plug-Plug
UG57B
Mating Interface:
5/8-24 threaded coupling
Jack-Jack
UG29B
VSWR:Per MIL-C-39012
Chassis Rec
UG58A
Durability: 500 cycles minimum
Angle M-F
UG27C
-65C to +165C
N(F)-BNC(M)
UG349A
Temperature Range
We offer complete diagnostic and repair services for your SMPTE and other fiber optic cables, regardless of who manufactured them. Our technicians will promptly evaluate your cables and provide the best possible repair options. In cases of
cable damage in the middle of a long assembly, we can cut and re-terminate one or both ends, providing you with one or 2
Typical Part Numbers
Frequency Range:
Fiber Optic Repair and Testing
[N-Plug]
functioning assemblies.
BNC Series (50 Ohm)
Typical Part Numbers
Frequency Range:
DC-10GHZ
Description
Impedance: 50 Ohm (75 Ohm available)
Plug-RG213/214
NE8060
Voltage Rating: 500 VRMS
Plug-RG58
NE8014
Base Metal: body: Brass (Stainless steel available)
Plug-LMR240
NE870
body: Nickel or Silver contact: silver or gold
Plug-Plug
UG491A
Mating Interface:
2-stud bayonet
Jack-Jack
UG914
VSWR:
1.3 (DC-4 GHZ)
Chassis Rec
UG1094
Durability: 500 cycles minimum
Angle M-F
UG306A
Temperature Range
-55C to +165C
N(F)-BNC(M)
UG201A
Plating: TNC Series (50 Ohm) (Also Available in Reverse Polarity)
Part No
[BNC-Plug]
[Fiber Repair Jig]
[F2 Contact]
[LEMO Conector Repair]
Studio Cable System Design and Installation
With more than 15 years experience in design and installation of SMPTE studio cable interconnect systems, Nemal can
assist you with innovative and cost effective solutions for your project. Our complete systems include wall mount studio
boxes, rack mount panels, camera cables, infrastructure cabling, media converters, tooling, test equipment, and all of the
supplies to keep it working.
Typical Part Numbers
Frequency Range: DC-11GHZ (18GHZ versions available)
Description
Part No
Impedance: 50 Ohm
Plug-RG213/214
NE6010
Voltage Rating: 500 VRMS
Plug-RG58
NE6030
Base Metal: Plug-LMR240
body: Brass (Stainless steel available)
NE600
Plating: Plug-Plug
body: Nickel or Silver contact: silver or gold
NE6330
Mating Interface: Jack-Jack
7/16-28 thread coupling (reverse thread avai)
NE6300
VSWR:1.3 (DC-4 GHZ)
Chassis Rec
NE6210
Durability: 500 cycles minimum
Angle M-F
NE690
Temperature Range
-65C to +165C
TNC(F)-N(M)
NE9330
[TNC-Plug]
SMA Series (50 Ohm)
Typical Part Numbers
DC-12.4GHZ (26 GHZ versions available)
Description
Part No
Impedance: 50 Ohm
Plug-RG174/316
NE2020
Voltage Rating: 375/5000 Peak
Plug-RG142/223
NE2010
Base Metal: body: Brass (Stainless steel available)
Plug-RG58
NE212
body: gold or passivated- contact: silver or gold
Plug-Plug
NE2310
VSWR:Per MIL-C-39012
Jack-Jack
NE2340
Durability: 500 cycles minimum
Chassis Rec
NE2220
Temperature Range
-65C to +165C
Angle M-F
NE290
SMA(F)-BNC(M)
NE9170
Frequency Range:
Plating: [SMA-Plug]
Please see Nemal General Catalog for our complete line of RF Connectors, Cables, and Assemblies
Available series include Type C, D-subminiature, DIN 7/16, Type F, SHV, HN, LC, MB, Miniature UHF, MHV, SMB, SMC, Triaxial (50 ohm), Twinaxial, and UHF.
14
15
United States: Tel (305) 899-0900
info@nemal.com
www.nemal.com
Brasil: Tel (11) 5535-2368
vendas@nemal.com.br
www.nemal.com.br
© Copyright 2013, NEMAL. All rights reserved.
All materials, content and forms contained in this booklet are the intellectual property of NEMAL and may not be copied, reproduced, distributed or displayed without NEMAL’s express written permission.