Product Guide
Low Energy LED Flex Lighting
Single colour LED Flex Lights






Available in 2 lengths 5 metre & 2 metre in 12V. For longer lengths a 24V version is available
24V is available in 20 metre rolls
4.8W per Metre both 12V & 24V
60 super bright LED’s per metre
IP20 & IP67 versions
Constant voltage
12 Volt
Description
IP20 Cool White
IP20 Warm White
IP20 Blue
IP20 Green
IP20 Red
IP20 Yellow
IP20 Cool White
IP20 Warm White
IP20 Blue
IP67 Cool White
IP67 Warm White
IP67 Blue
Code
LED12CW
LED12WW
LED12B
LED12G
LED12R
LED12Y
LED212CW
LED212WW
LED212B
LEDF121PCW
LEDF121PWW
LEDF121PB
Roll Length
5 Metre
5 Metre
5 Metre
5 Metre
5 Metre
5 Metre
2 Metre
2 Metre
2 Metre
5 Metre
5 Metre
5 Metre
Code
LEDF24CW
LEDF24WW
LEDF24PB
24 Volt
Description
IP20 Cool White
IP20 Warm White
IP20 Blue
Roll Length
20 Metre
20 Metre
20 Metre
Each roll of Flex Strip including IP67
version is supplied with self-adhesive
backing tape suitable for installation on to
most smooth/semi-smooth surfaces.
Single colour LED Flex IP20
Cut point every 50mm
+
+
8mm
+
-
-
-
2mm
Single colour LED Flex IP67
10mm
13mm
Cut point every 50mm
+
-
+
-
+
-
-
+
-
11mm
4mm
6mm
03/12 IPG 1 LEDFLEX VER01 –PS
+
Page 1 of 5
www.mlaccessories.co.uk
Product Guide
COLOUR Variations




RED, BLUE, GREEN, YELLOW, WARM WHITE, COOL WHITE in 12V 5 metre.
BLUE,WARM WHITE, COOL WHITE in 12V 2 metre.
BLUE,WARM WHITE, COOL WHITE in IP67 12V 5 metre
BLUE,WARM WHITE, COOL WHITE in 24V 5 metre.
PACK/ROLL Contents


Each pack/length of LED Flex comes complete with a 150mm cable with plug & socket
attached ready to connect to the driver, a 2 way terminal block (not supplied) will be needed
to connect the Driver to the Flex Strip.
Each strip maybe cut every 50mm into smaller lengths
Single Colour Accessories
All LED Flex may be joined together this can be done in various ways depending on the installation
Connecting 2 lengths of Flex light
together for a continuous straight
run
CENCON
CENCONF
+
-
Connecting 2 lengths of Flex light
together where a change of
direction may be required
+
NOT IN 2012 CATALOGUE
CENCONS
Connecting to a driver
+
Single Colour IP67 Accessories
NOT IN 2012 CATALOGUE
CONIP
Connecting to a driver or 2 pieces of IP67 Flex
Cable connections must be soldered to Flex
strip and end caps filled with silicone
FLEXFIX
Alternative screw fixing for IP67 flex for
installations onto brickwork and other rough
surfaces including wet surfaces.
03/12 IPG 1 LEDFLEX VER01 –PS
Page 2 of 5
www.mlaccessories.co.uk
Product Guide
Low Energy LED Flex Lighting
RGB Colour Changing LED Flex Light






Available in 3 metre 24V rolls.
7.2W per Metre
30 Super bright LED’s per metre
IP20
Constant voltage
Must be used with RGBCON controller (See RGB accessories for details)
Code
LED24RGB
RGB Colour Changing
Description
Roll Length
IP20 24V RGB colour changing
3 Metre
Cut length every 165mm
+
10mm
+
B
R
G
B
R
G
2.5mm
PACK Contents


Each 3mtr pack of RGB LED Flex comes complete with a 150mm cable with plug attached
ready to connect to the RGBCON controller (not supplied). 4 x 150mm colour coded cables
are pre-soldered to the opposite end for connection to a second RGB strip if required
Each strip maybe cut every 165mm into smaller lengths
03/12 IPG 1 LEDFLEX VER01 –PS
Page 3 of 5
www.mlaccessories.co.uk
+
B
R
G
Product Guide
RGB Colour Changing LED Flex Accessories
RGB controller complete with infra-red remote control will control
up to 50metres of LED24RGB Flex Light.
Supplied complete with remote plug to connect to suitable 24V
constant voltage driver. Female socket to connect LED24RGB
Flex Light.
Infra-red remote control allows changing of colour, multiple
sequences and dimming function.
RGBCON
Quick and
simple preinstalled
connection to
the RGB Flex
Light
NOT IN 2012 CATALOGUE
RGBFLEX
NOT IN 2012 CATALOGUE
RGBFCON
NOT IN 2012 CATALOGUE
RGBAMP
Plug connection
supplied for ease of
connection to 24V
constant voltage
driver
No soldering required quick and easy
way to connect RGB Flex Light to
RGBCON Ideal for use when multiple
control is required from 1 x 3 metre roll of
RGB Flex
No soldering required quick and easy
way to join 2 lengths of RGB Flex Light
together
Approximately 75mm in length
RGB amplifier requires DC12V/24V
power supply
The RGB amplifier is used when control
from 1 RGBCON controller is required to
control multiple LED24RGB RGB Flex
Lights
For full circuit wiring instructions please
refer to the RGBAMP Data Sheet.
03/12 IPG 1 LEDFLEX VER01 –PS
Page 4 of 5
www.mlaccessories.co.uk
Product Guide
DRIVERS



A selection of drivers for both 12V & 24V and IP67 rated
ALL Drivers are non-dimmable constant voltage
The type of driver used will be determined by the:a) The voltage of the Flex light to be powered (12V or 24V)
b) The length of the Flex lights 2mtrs, 5Mtrs 0r 20Mtrs
c) IP rating
9W 12VDC Constant voltage driver IP20
12VDC
Compatible with up to 2Mtr length 12V LED Flex single colour
36W 12VDC Constant voltage driver IP20
12DC36
Compatible with up to 7.5Mtr length 12V LED Flex single colour
12DCIP36
36W 12VDC Constant voltage driver IP67
Specifically designed for the LEDF12IP** IP67 range of LED Flex
Light
Compatible with up to 7.5Mtr length 12V LED Flex single colour
10W 24VDC Constant voltage driver IP20
24VDC
Compatible with up to 2Mtr 24V LED Flex single colour
Compatible with up to 1Mtr 24V RGB LED Flex
NOT IN 2012 CATALOGUE
LEDADP36
24DC100
24DC150
36W 24VDC Constant voltage driver IP20
Compatible with up to 5Mtr length 24V LED Flex RGB
Compatible with up to 7.5Mtr length 24V LED Flex Single colour
100W 24VDC Constant voltage driver IP20
150W 24VDC Constant voltage driver IP20
100W version compatible with up to 20mtrs length 24V LED Flex single
colour
or
with up to 13mtrs length 24V RGB LED Flex single colour
150W version compatible with up to 30mtrs length 24V LED Flex single
colour
or
with up to 20mtrs length 24V RGB LED Flex single colour
Must be installed in a suitable enclosure
03/12 IPG 1 LEDFLEX VER01 –PS
Page 5 of 5
www.mlaccessories.co.uk