SWING
ARMS
194
W!
NE
OICE
mild steel
196
IP 55
A: 300-500
W: 300-600
D: 155-210
OICP
aluminium
198
IP 65
A: 309-495
W: 395-542
D: 200
SASL
200
Light system
W!
NE
SASM
206
Medium system
Accessories
OICE accessories
197
OICP accessories
199
General Accessories
286
195
CATALOGUE 2011.book Page 196 Wednesday, August 3, 2011 5:22 PM
Swing Arms
OICE
Operator Interface Control Enclosure
Based upon the well-known MAS enclosure, the new Operator Interface Control Enclosure (OICE) offers a housing solution for
HMIs, meeting the industrial environment requirements. The body is pre- machined to enable use in combination with the
swing arm systems SL and SM. It has an aluminium front cover for easier machining. Rear door allows access to the inside, and
side handles.
NEW!
IP 55, IK 10
Technical data
Material: Body and door made from 1.2mm mild steel, front cover
in aluminium, and handles in plastic.
Body: Folded and seam welded, with maximum opening. The
front fitted with an aluminium front panel. Handling grips mounted
to front, left and right edges.
Rear door: Surface mounted with 130º opening. Concealed
removable hinges with captive pin. Hinges can be mounted to
allow left or right hand opening. Door profiles MMDP are available
as an accessory.
Lock: Customised lock with double grip for easy opening of the
door. Double-bit 3mm insert and 90º movement. Other inserts
and locks are available as an accessory.
Protection: Complies with IP 55.
Finish: RAL 7035 structure powder coating.
Approvals: CE.
Delivery: Enclosure with aluminium front panel, rear door, plastic
double-bit 3mm key, and mounting accessories.
OICE, IP 55, IK 10
Description
H
W
D
Operator enclosure 300x300x155
Operator enclosure 300x400x210
Operator enclosure 400x400x210
Operator enclosure 400x600x210
Operator enclosure 500x500x210
Operator enclosure 500x600x210
300
300
400
400
500
500
300
400
400
600
500
600
155
210
210
210
210
210
196 Swing Arms
Mounting depth
155
210
210
210
210
210
Part No.
OICE303015
OICE304021
OICE404021
OICE406021
OICE505021
OICE506021
Visit our website at www.eldon.com
Chapter_06xSWING_ARMS_2011_61703_1.fm Page 197 Friday, August 19, 2011 11:28 AM
Swing Arms accessories
ALL, Locks
ALI, Inserts
Description: Alternative locks to replace the standard one.
Pack quantity: 1 piece.
Description
Description: Inserts to replace the standard double-bit 3mm
insert in the standard polyamide lock.
Material: Polyamide.
Pack quantity: 1 piece.
Type
Part No.
Description
Key 333
ALL509
Eldon lock with cylinder
Ronis key n°
C21323
ALL510
Chrome plated lock with cylinder
Ronis key n°
C21323
ALL508
Double-bit 3mm
Double-bit 5mm
Square 7mm
Square 8mm
Triangular 8mm
Slotted 2x4mm
ADA/ACA lock with cylinder
Ronis key n°
C21323
ALL506
ADAB/ACB lock with cylinder
Ronis key n°
C21323
ALL507
Polyamide lock with cylinder
Product specifications, CAD drawings and information available on the website
Part No.
ALI503
ALI505
ALI523
ALI525
ALI524
ALI528
Swing Arms 197
CATALOGUE 2011.book Page 198 Wednesday, August 3, 2011 5:22 PM
Swing Arms
OICP
Operator Interface Control Panel
IP65
Technical data
Material: Body: Al Mg Si05, Rear plate: Al Mg, and Corners: Al
Si12.
Protection: Complies with IP 65.
Finish: Body and rear plate: anodised aluminium, and Corners:
RAL 7016.
Delivery: Body, screwed rear plate, front plate mounting kit, and
mounting accessories.
OICP, IP65
H
W
D
Part No.
309
345
354
398
415
495
525
395
525
525
470
542
200
200
200
200
200
200
OICP305220
OICP343920
OICP355220
OICP395220
OICP414720
OICP495420
* The external enclosure dimension is increased by 16.5mm on the side where there is a grip profile.
198 Swing Arms
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 199 Wednesday, August 3, 2011 5:22 PM
Swing Arms accessories
OIDES, OICP panel with door extension
section
Description: OICP panel with door extension profile. It
increases the OICP panel depth in 55mm. It has grid profiles in
the door extension profile sides.
Material: Body and door extension profile: Al Mg Si05, Rear
plate: Al Mg, and Corners: Al Si12.
Protection: Complies with IP 65.
Finish: Body, door extension profile and rear plate: anodised
aluminium, and Corners: RAL 7016.
Pack quantity: OICP panel with rear plate, door extension
profile, external hinges, and locking system.
Enclosure dimension
Viewing area
H
W
D
h
w
309
525 55+200
255
471
345
395 55+200
291
341
354
525 55+200
300
471
398
525 55+200
344
471
415
470 55+200
361
416
495
542 55+200
441
488
Part No.
OIDES305205
OIDES343905
OIDES355205
OIDES395205
OIDES414705
OIDES495405
OIFP, Front plate
Description: Front plate for components, with a protection film
in one side.
Material: 3mm aluminium.
Pack quantity: 1 piece. Mounting accessories are supplied
with the control panel OICP.
H
W
h
w
Part No.
269
305
314
358
375
455
485
355
485
485
430
502
255
291
300
344
361
441
471
341
471
471
416
488
OIFP3052
OIFP3439
OIFP3552
OIFP3952
OIFP4147
OIFP4954
OIKS, Keyboard support
OISN, Spring nut set
Description: Spring nuts for fixing components easily, without
any machining in the panel.
Pack quantity: 10 pcs.
Thread
Part No.
M4
M5
OISN04
OISN05
Description: Keyboard support to be fixed to the control
panel. Machining is required.
Material: Mild steel. Stainless steel available on request.
Finish: RAL 9006.
Pack quantity: 1 pc with mounting accessories.
Part No.
OIKS01
OICH, Command handle
OIPC, 122º connecting brackets
Description: Handle with ergonomic design, which enables
easy handling of the panel, even with working gloves.
Machining is required.
Material: Aluminium.
Finish: Anodised aluminium.
Pack quantity: 1 pc.
W
Part No.
250
350
OICH250
OICH350
Description: For connecting OICP control panel to keyboard
panel below. Machining is required.
Material: Aluminium.
Finish: RAL 9006.
Pack quantity: 2 pcs with mounting accessories.
Product specifications, CAD drawings and information available on the website
Part No.
OIPC01
Swing Arms 199
CATALOGUE 2011.book Page 200 Wednesday, August 3, 2011 5:22 PM
Swing Arms
SASL
Swing Arm SL, light system
Technical data
The maximum weight which an SL swing arm can support
depends on the length of the arm and the systems structure.
200 Swing Arms
Max. Weight (Kg) = N / 9.81
Visit our website at www.eldon.com
Chapter_06xSWING_ARMS_2011_61703_5.fm Page 201 Wednesday, August 3, 2011 5:57 PM
Swing Arms accessories
SAS, Operator arm section profile
SASJ, Set-up joint SL
Description: The arm section profile is available with an open
cable duct or completely closed. In the open profile the plastic
cover can be easily pulled out and fitted back into place.
Material: Extruded aluminium profile. Plastic cover in the open
profile made from EPDM.
Weight: Closed profile 3.50Kg/m, Open profile 3.76Kg/m.
Finish: Anodised aluminium, similar to RAL 9006. Plastic
cover in the open profile similar to RAL 7042.
Delivery: 1 pc.
Closed profile
H
W
Length
Part No.
60
45
250
500
1000
2000
SAS025CSL
SAS050CSL
SAS100CSL
SAS200CSL
Description: Set-up joint component for SL system, angle of
rotation 300º with limiter. Cable access with a plastic clip-on
cover.
Material: Aluminium.
Finish: RAL 7035.
Delivery: 1 pc, sealing gaskets, and mounting accessories.
Part No.
SASJ1SL
Open profile
H
W
Length
Part No.
60
45
250
500
1000
2000
SAS025OSL
SAS050OSL
SAS100OSL
SAS200OSL
SABT SL, Base bracket turnable SL
SABW, Base or wall flange SL
Description: Base bracket turnable for SL system, angle of
rotation 300º with limiter.
Material: Aluminium.
Finish: RAL 7035.
Delivery: 1 pc, sealing gaskets, and mounting accessories.
Description: Base or Wall flange component for SL system.
Material: Aluminium.
Finish: RAL 7035.
Delivery: 1 pc, sealing gaskets, and mounting accessories.
Part No.
Part No.
SABT1SL
SABW1SL
Product specifications, CAD drawings and information available on the website
Swing Arm 201
CATALOGUE 2011.book Page 202 Wednesday, August 3, 2011 5:22 PM
Swing Arms accessories
SAC, Coupling SL
SAEC, Elbow coupling SL
Description: Coupling component for SL system, angle of
rotation 300º with limiter.
Material: Aluminium.
Finish: RAL 7035.
Delivery: 1 pc, sealing gaskets, and mounting accessories.
Description: Elbow coupling component for SL system, angle
of rotation 300º with limiter. Cable access with a plastic clip-on
cover.
Material: Aluminium.
Finish: RAL 7035.
Delivery: 1 pc, sealing gaskets, and mounting accessories.
Part No.
Part No.
SAC1SL
SAEC1SL
SAE, Elbow SL
SARE, Reinforced elbow SL
Description: Elbow component for SL system. Cable access
with a plastic clip-on cover.
Material: Aluminium.
Finish: RAL 7035.
Delivery: 1 pc, sealing gaskets, and mounting accessories.
Description: Reinforced elbow component for SL system.
Cable access with a plastic clip-on cover.
Material: Aluminium.
Finish: RAL 7035.
Delivery: 1 pc, sealing gaskets, and mounting accessories.
202 Swing Arms
Part No.
Part No.
SAE1SL
SARE1SL
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 203 Wednesday, August 3, 2011 5:22 PM
Swing Arms accessories
SAIJ, Intermediate joint SL
SAAE, Rotation elbow SL
Description: Intermediate joint component for SL system,
angle of rotation 360º with limiter. Cable access with a plastic
clip-on cover.
Material: Aluminium.
Finish: RAL 7035.
Delivery: 1 pc, sealing gaskets, and mounting accessories.
Description: Rotation elbow component for SL system, angle
of rotation 300º with limiter. Cable access with a plastic clip-on
cover.
Material: Aluminium.
Finish: RAL 7035.
Delivery: 1 pc, sealing gaskets, and mounting accessories.
Part No.
Part No.
SAIJ1SL
SAAE1SL
SAWJV, Wall joint with vertical outlet SL
SAWJH, Wall joint with horizontal outlet
SL
Description: Wall joint with vertical outlet component for SL
system, angle of rotation 300º with limiter. Cable access with a
plastic clip-on cover.
Material: Aluminium.
Finish: RAL 7035.
Delivery: 1 pc, sealing gaskets, and mounting accessories.
Description: Wall joint with horizontal outlet component for SL
system, angle of rotation 300º with limiter. Cable access with a
plastic clip-on cover.
Material: Aluminium.
Finish: RAL 7035.
Delivery: 1 pc, sealing gaskets, and mounting accessories.
Part No.
Part No.
SAWJV1SL
SAWJH1SL
Product specifications, CAD drawings and information available on the website
Swing Arms 203
CATALOGUE 2011.book Page 204 Wednesday, August 3, 2011 5:22 PM
Swing Arms
SASM
Swing Arm SM, medium system
NEW!
The maximum weight which an SM swing arm can support
depends on the length of the arm and the system structure.Max.
Weight (Kg) = N / 9.81
L
N
204 Swing Arms
Visit our website at www.eldon.com
Chapter_06xSWING_ARMS_2011_61703_7.fm Page 205 Tuesday, August 23, 2011 12:49 PM
Swing Arms accessories
SAS SM, Operator Arm Section Profile SM
Description: Angled aluminium tubes (machined at both
ends).
Material: Anodised Aluminium.
Weight: 5Kg/m.
Finish: silver (natural) anodized.
Delivery: 1 pc. Different length can be supplied on request.
SASJ SM, Set-up joint SM
Description: Set-up joint component for SM system, angle of
rotation 300 degrees with stop. Cable access with a screw fit
plastic cover.
Material: Die-cast aluminium.
Finish: RAL 7016 (anthracite grey).
Delivery: 1 pc, sealing gaskets and mounting accessories.
H
W
Length
Part No.
Part No.
90
70
250
500
1000
1500
2000
SAS025CSM
SAS050CSM
SAS100CSM
SAS150CSM
SAS200CSM
SASJ1SM
SABT SM, Base bracket turnable SM
SABW SM, Base or wall bracket SM
Description: Rotary base bracket for SM system, angle of
rotation 300 degrees with stop.
Material: Die-cast aluminium.
Finish: RAL 7016 (anthracite grey).
Delivery: 1 pc, sealing gaskets and mounting accessories.
Description: Base or wall bracket for SM system.
Material: Die-cast aluminium.
Finish:RAL 7016 (anthracite grey).
Pack quantity: 1 pc, sealing gaskets and mounting
accessories.
Part No.
Part No.
SABT1SM
SABW1SM
Product specifications, CAD drawings and information available on the website
Swing Arms 205
CATALOGUE 2011.book Page 206 Wednesday, August 3, 2011 5:22 PM
Swing Arms accessories
SAC SM, Coupling SM
SAEC SM, Elbow coupling SM
Description: Coupling component for SM system, angle of
rotation 300 degrees with stop.
Material: Die-cast aluminium.
Finish: RAL 7016 (anthracite grey).
Delivery: Delivery: 1 pc, sealing gaskets and mounting
accessories.
Description: Elbow coupling for SM, angle of rotation 300
degrees with stop, including screw fitting plastic cover.
Material: Die-cast aluminium.
Finish: RAL 7016 (anthracite grey).
Delivery: 1 pc, sealing gaskets and mounting accessories.
Part No.
Part No.
SAC1SM
SAEC1SM
SAE SM, Elbow SM
SAIJ SM, Intermediate joint SM
Description: Elbow component for SM system. Cable access
with a screw fitted plastic cover.
Material: Die-cast aluminium.
Finish: RAL 7016 (anthracite grey).
Delivery: 1 pc, sealing gaskets and mounting accessories.
Description: Intermediate joint for SM system, angle of
rotation 300 degrees with stop, 2 assembly including screw-fit
plastic covers.
Material: Die-cast aluminium.
Finish: RAL 7016 (anthracite grey).
Delivery: 1 pc, sealing gaskets and mounting accessories.
206 Swing Arms
Part No.
Part No.
SAE1SM
SAIJ1SM
Visit our website at www.eldon.com
CATALOGUE 2011.book Page 207 Wednesday, August 3, 2011 5:22 PM
Swing Arms accessories
SAAE SM, Rotation elbow SM
SAWJH SM, Wall joint with horizontal
outlet SM
Description: Rotary Elbow component for SM system, angle
of rotation 300 degrees with stop, including screw fitting plastic
cover.
Material: Die-cast aluminium.
Finish: RAL 7016 (anthracite grey).
Delivery: 1 pc, sealing gaskets and mounting accessories.
Description: Wall joint with horizontal outlet SM, angle of
rotation 300 degrees with stop, including screw fitting plastic
cover.
Material: Die-cast aluminium.
Finish: RAL 7016 (anthracite grey).
Delivery:
1 pc, sealing gaskets and mounting accessories.
Part No.
Part No.
SAAE1SM
SAWJH1SM
SAWJV SM, Wall joint with vertical outlet
SM
Description: Wall joint with vertical outlet SM, angle of rotation
300 degrees with stop, including screw fitting plastic cover.
Material: Die-cast aluminium.
Finish: RAL 7016 (anthracite grey).
Delivery: 1 pc, sealing gaskets and mounting accessories.
Part No.
SAWJV1SM
Product specifications, CAD drawings and information available on the website
Swing Arms 207