Local Area Network
Surface Mount Modular Jacks
This modular surface mounting jack is available in 4-,
6-, and 8-wire versions. The
base contains the jack with
screw type terminals which
are factory terminated to the jack lead wires. Screw or
adhesive mount.
Part No. 625A2450xx* - 4-wire assembly
Part No. 625A2650xx* - 6-wire assembly
Part No. 625A28NK50xx* - 8-wire non-keyed assembly
Flush Mount Jacks
Flush mounted installation on indoor
surfaces. Accepts modular, plug-ended
line cords.
Part No. 625B4450xx* - 4 conductor
flush mount jack
Part No. 697B8NK50xx* - 8 conductor
flush mount jack, nonkeyed
Wall Mount Jack Assemblies
Part No. 630AP4xx* - Plastic
– with mounting lugs 4 conductor,
screw terminals, USOC wiring.
Part No. 630AD4 - Stainless steel
with mounting lugs 4 conductor,
screw terminals, USOC wiring.
Snap-On Cover, Factory Wired
Available in both standard
(dry) and CorroShield (gelled)
versions. Snap-on cover and
factory wired for quick installation. Double-sided adhesive
pad included for versatile mounting options. Available
with USOC RJ48X/RJ31X wiring for security alarm or
life-line type applications.
Part No. 625A24xx* - 4 conductor, screw terminals
Part No. 625A28Kxx* - 8 conductor, keyed, screw
terminals
Traditional Jack Plates
Simplex and Duplex jack plates provide
versatile flush mounted connections in
aesthetically pleasing styles and colors.
Available in both standard (dry) and
CorroShield (gelled) versions for long
lasting corrosion protection. USOC wiring.
Mounted with brackets or directly to wall.
Available in 4, 6 and 8 conductor configurations.
Part No. 625B44xx* - 4 conductor, screw terminals
Surface Mount Jack Assemblies
Screw on cover
Available in both standard
(dry) and CorroShield (gelled)
versions. Captive retaining
screw keeps the cover securely
fastened, preventing damage to the assembly.
110 IDC or filled splice connector terminations eliminate stripping and wrapping of wires. Designed for
mounting on baseboards, walls or other flat surfaces.
Part No. 625A4xx* - Screw on cover, 4 conductor,
screw terminals
www.ptsupply.com
marketing@ptsupply.com
Jack & Cover Color Ordering Chart
*Add color code to end of Part No. when ordering.
Example: 625A24xx Ivory = 625A2450
Code
Color
44
Ash
50
Ivory
52
Electrical Ivory
85
White
800-238-7514
D-1
Local Area Network
Modular Plugs
For flat stranded line cord:
Part No. NMP4221 - 6 position, 4 wire,
Cat 5 Capabilities
Part No. NMP6221 - 6 position, 6 wire
Cat 5 Capabilities
Part No. NMP8111 - 8 position, 8 wire, nonkeyed
Cat 5 Capabilities
For round cables with solid conductors:
Part No. NMP8225 - 8 position, 8 wire, nonkeyed
Cat 5 Capabilities, 1 piece
Part No. NMP8625 - 8 position, 8 wire, nonkeyed
Cat 5E Capabilities, 2 pieces
Ratchet Telemaster™ Multi-Function
Telephone Tool
Used to prepare and terminate
phone cable for RJ-11 or RJ-45
modular plugs. Cuts, strips and
crimps for easy, on-the-job, one-tool
application. Crimps primary modular plug strain
relief only. Steel frame for long-term durability. Offers
repeatable crimp action for consistent, high quality
connections.
Part No. 30696.1
Modular Crimp Tool
RJ-11/12/45 Ratchet Telco Crimper
Boxed. Will not work on AMP
RJ-45 plugs. For AMP RJ-45 plugs
use models 6554011 or 6554012.
Part No. RL6011
Line Cord
Flat (oval) multi-conductor
unshielded modular type telecommunications interconnect cable
consists of stranded bare copper
conductors with thermoplastic
insulation in a PVC jacket. Jacket
is Pearl Gray, other colors and sizes may be available
on request. UL Listed.
Part No.
Conductors
AWG
65TF264M
4
26
65TF224M
6
28
AWC10152W
6
26
R66 Quick Connect Terminal Blocks
“M” Series
Compact “small space” blocks.
Available as blocks only, or with
molded plastic base and cover
housing. Supplied with integral
fanning strips, molded on each
side of the block, and notched
every 10 rows for easy identification. Available in gray or beige
molded, impact-resistant plastic
housings.
The R66M150 block complies with TIA/EIA-568
Category 5 specifications. These blocks provide the
highest transmission performance for speeds up to 100
megahertz per second, while decreasing attenuation,
near-end crosstalk and return loss. From Emerson
Network Power.
R891S
Part No.
R66M125X
R66M150X
R891S
RJ-45, RJ-11
Telemaster™ Kit
R66M150X
Pairs
Clip
Dimensions
l x w x d (in)
Std.
Pkg.
Weight
25
4
10 x 2.54 x 1.08
25
1 lb.
50*
2
10 x 2.54 x 1.08
25
1 lb.
10 x 2.75 x 2
50
6 oz.
Standoff bracket**
R66MC
Clear plastic cover
200
2 oz.
SA1SS100
Stainless Steel Bridging Clip
100
2 lbs./1000
Basic kit with multifunctional
telephone tool to cut, strip and crimp.
*Rated for Category 5
** R891S standoff bracket also forms a wiring trough.
Kit includes:
• Telemaster for RJ-11/RJ-45 Plugs
• (15) 4-Position, RJ-11 Stranded Modular Plugs
• (15) 6-Position, RJ-11 Stranded Modular Plugs
• (15) 8-Position, RJ-45 Stranded Modular Plugs
• Durable hard case
Part No. 33704
Clip Configurations:
25 pair - One row of 50 4-position clips
D-2
www.ptsupply.com
marketing@ptsupply.com
50 pair - Double row of 50 2-position clips
800-238-7514
Local Area Network
Field Terminated 66M Blocks
Cat 5 Connecting Blocks designed to fill the
need for Cat 5 distribution using familiar
quick-clips for termination.
• Ability to transmit data rises up to 100 MHz
• Exceeds TIA/EIA 568-B specifications for
Category 5 performance
• Includes cover labeled “Cat 5”
From Suttle.
Part No. 66M150C5
110 Wiring Blocks
Choose either with legs when
back case routing or order
without legs when depth is
limited or when frame mounting.
Designation strips are included
with each 110 wiring block
purchase. May be field terminated with 22-26 AWG
solid wire. Color coded blocks will provide fast and
efficient termination and identification. From SMP
Data Communications.
Part No. DCC050110EFS - 50 pairs
Part No. DCC100110EFS - 100 pairs
Part No. DCC300110EFS - 300 pairs
To order with mounting legs, add “L” to the end of the
Part No., i.e. DCC300100EFSL.
110 Clips
Exceeds industry standards for
Category 5E and Category 6
specifications, respectively. 110
Blocks may be field terminated
with 22-26 AWG solid wire.
Color coded pairs for easy
identification. Designation
labels included. Order with legs when back case routing, order without legs when depth is limited or when
frame mounting. 110 Block may be kitted for easy
installations. From SMP Data Communications.
Part No. C310 - 3 pairs, C3 clips, pack of 10
Part No. C410 - 4 pairs, C4 clips, pack of 10
Part No. C510 - 5 pairs, C5 clips, pack of 10
www.ptsupply.com
marketing@ptsupply.com
Connectorized Inside Cable Assemblies
Connectorized cables save installation
time by minimizing on-the-job terminating and cable splicing. Pre-tested,
factory assembled connectorized
cables also minimize installation
terminating and splicing mistakes.
Available in Cat 3, Cat 5, PVC or
plenum. Call for details.
Type designations—please specify length:
• Type PX - Plug (male) on one end
• Type CX - Connector (female) on one end
• Type PC - Plug on one end, connector on other end
• Type PP - Plug on both ends
• Type CC - Connector on both ends
Cable Management Panels
Horizontal & Vertical Routing
• Front side cable management, recommended between
32 and 48 port patch panels. Manages up to 48
ports/cables
• Provides front horizontal and vertical cable routing
• Steel construction painted black
• Includes one single sided cable manager and 1/2"
screws for mounting
From SMP Data Communications.
Part No. CO3519
Large Horizontal Routing
• Front side cable management includes four horizontal rings sized 3" x 3"
• Large horizontal routing capabilities. Excellent
where large cable paths are required. 3.5"H x 19"L
• Steel construction painted black
• Includes one front side cable manager and 1/2"
screws for mounting
From SMP Data Communications.
Part No. CO3519L
800-238-7514
D-3
Local Area Network
Support Bar Kit
• Back-side cable management support bar kit used to
support cable behind patch panel termination blocks
• Support bar mounts to back side of equipment rack.
Kit includes one support bar, two vertical cable management rings, mounting hardware and installation
instructions. From SMP Data Communications.
Part No. SB1719
Low Density Front Cable Organizer
• Manages 24 ports/cables
• Provides front horizontal and vertical routing
capabilities
• Steel construction painted black
• To be used above or below patch panels
• Includes the single sided cable manager, two vertical
cable management rings and 1/2" screws for mounting
• Size: 1.75"H x 19"L.
From SMP Data Communications.
Part No. CO17519
Double Sided Horizontal Cable
Organizer Kit
• Horizontal cable rings on organizer exactly match
connector placement on patch panels
• Affords grouped front and back cable management
• Organizer rings provide strain relief as well as
Category 5 bend radius protection
• Steel construction painted black
• Each effectively manages up to 24 ports (one row of
jacks on a panel)
• 32 and 48 port patch panels requires two kits.
Includes the double sided cable manager, 4 auxiliary
rings and 1/2" screws for mounting
• Size: 1.75"H x 19"L
From SMP Data Communications.
Part No. COD1719
D-4
www.ptsupply.com
marketing@ptsupply.com
Distribution Rings
Distribution rings are constructed of
die cast aluminum and used to provide
support for wires in building cable
terminals and distribution closets.
Size
w x h (in)
Standard
Package
Weight
(lbs/carton)
1.87 x 2.74
25
13
SI4754
3.11 x 3.74
25
16
SI4755
5.12 x 3.74
25
18
Part No.
SI4753
Distribution Posts
Encapsulated screw eliminates the
need for installation tools. The post is
manufactured using UL 94 V-0 rated
plastic and a No. 8 sheet metal screw, and can be used
on wooden or pre-drilled metal backboards.
Part No. R20B
Wall Mount Relay Racks
For mounting all data and telecom equipment. Self-aligning design speeds assembly.
Rugged steel construction with durable black
powder coat finish. Rack screws included.
Part No.
Overall Height (in)
Rack Units
Depth (in)
WM812
14
8 spaces
12
WM1512
26-1/4
15 spaces
12
WM3012
52-1/2
30 spaces
12
WM4012
70
40 spaces
12
WM818
14
8 spaces
18
WM1518
26-1/4
15 spaces
18
WM3018
52-1/2
30 spaces
18
WM4018
70
40 spaces
18
Swing Gate Racks
Effective, open wall mounting allows
punching down while fully open. Swings
equipment out for ease in wiring. Provides
tie points for internal cable management.
Rugged steel construction with durable
black powder coat finish, 150 lb. capacity.
Includes Velcro cable loops and rack screws.
Part No.
Overall Height (in)
Rack Units
Depth (in)
SGR1212
24-1/2
12 spaces
12.5
SGR2012
38-1/2
20 spaces
12.5
SGR1218
24-1/2
12 spaces
18
SGR2018
38-1/2
20 spaces
18
800-238-7514
Local Area Network
DWR Sectional Wall Mount Rack
Sectional Wall Mount Rack with
Enhanced Cable Management for
Larger Systems.
• Tool-Free Quick-Mount™ system
allows for easy, one-person mounting
of the center section to the backpan
on the jobsite
• Available in 15", 20" and 24" useable
19'' Relay Racks
Gives a 19" panel space for mounting patch
panels or other 19" mountable equipment.
All steel, painted black. Self-aligning
structure speeds assembly. Rack screws
included. Aluminum top angles easily fielddrilled. Stabilizer gussets.
depths
• Welded construction provides up to a 300 lb. weight
capacity, depending on model
• Fully adjustable 1/8", 10-32 threaded rackrail
From Middle Atlantic. Call for ordering matrix.
Hinged Wall Mount Brackets
Quick-release knob provides a
19" panel space for mounting
patch panels. 5" depth from front
mounting holes to back mounting
bracket. Can be stacked on wall.
Steel construction painted black.
Part No.
Rack Units
Height (in)
Lbs/ea.
WMB3519
2
3.5
3
WMB7019
4
7
6
Part No.
Overall
Height (in)
RL1045
RL1038
RL1245
Rack Units
Thread Type
84
45
10-32
72
38
10-32
84
45
12-24
Relay Rack Shelves
Provides 19" panel space with either
front or center mounting shelf. All
steel, painted black.
Part No.
Depth (in)
Mounting
Load Capacity (lb)
RRS1914A
14
front
40
9132
20
center or top
50
Double-Sided Vertical Cable Managers
Provides an auxiliary cable channel between
two equipment racks to alleviate cable congestion near the termination field and/or electronic
equipment. The 3-piece unit easily mounts
between standard 7' equipment racks. Both the
VCM3 and VCM6 mount using large thumb
screws. Includes mounting hardware and
instructions. No tools required for assembly.
All steel, painted black. Assembled length 6'.
Pivoting Panel Mounts
Handy wall mounting of panels,
allows for reach access. 18" models
handle deepest network equipment.
Allows punching down while fully
open. Provides tie points for internal
cable management. Rugged steel construction with
durable black powder coat finish. Includes Velcro cable
loops and rack screws.
Part No.
PPM2
Overall
Height (in)
Rack Units
Depth
Weight
Capacity (lb)
4
2
6
20
PPM4
7-1/2
4
6
30
PPM6
12-3/4
6
6
40
PPM612
12-3/4
6
12
40
PPM812
16-1/4
8
12
60
PPM818
16-1/4
8
18
60
Dimensions (in)
Capacity
per ring*
VCM3
(12) 3.06 x 5.5 on front and back
160 cables
VCM6
(12) 6 x 5.5 on front and back
410 cables
Part No.
*Capacity based on .25" OD CAT 5, 4-pair cable.
Auxiliary Rings
AR24
AR44
Part No. AR24 - 2" x 4"
Includes 12-24, 1/2" mounting
screws. Two per package.
Part No. AR44 - 4" x 4"
Includes 12-24, 1/2" mounting
screws. Two per package.
www.ptsupply.com
marketing@ptsupply.com
800-238-7514
D-5
Local Area Network
QuickPort® Snap-In Connectors for UTP Cables
Leviton’s 8-position, 8-conductor Connectors feature dual-color-coded wiring labels with both T568A and T568B
wiring patterns, QuickPort compatibility, and a 110-style rear termination field for easy termination of a jack
while installed in a wallplate or field-configurable panel. eXtreme 6+ connectors are also available in bulk pack
quantities of 25 (some colors require additional lead times, please check availability when ordering.)
eXtreme 6+ System components meet or exceed the requirements for channel/component-level performance per
TIA/EIA Category 6, and are part of Leviton’s high-performance eXtreme 6+ System, which delivers reliable,
error-free transmission in an active, real-time network environment.
eXtreme 10G Snap-in Connectors
Part No. 6110GR*6 - 8-conductor
eXtreme 10G channel-rated connector
Category 3 Connectors
Part No. 41108R*3 - 8-conductor
Category 3 connector
eXtreme 6+ Snap-in Connectors
Part No. 61110R*6 - 8-conductor
eXtreme 6+ component-rated connector
Part No. 61110B*6 - 8-conductor
eXtreme 6+ component-rated connectors
QuickPack™ (25 per pack)
GigaMax 5E Snap-in Connectors
Part No. 5G110R*5 8-conductor GigaMax 5E+
component-rated connector
Part No. 5G110B*5 - 8-conductor GigaMax 5E+
component-rated connectors QuickPack™ (25 per pack)
Part No. 5G108R*5 - 8-conductor GigaMax 5E
channel-rated connector
Part No. 5G108B*5 - 8-conductor GigaMax 5E
channel-rated connectors QuickPack™ (25 per pack)
Category 5 Connectors
Part No. 41108R*5 - 8-conductor
Category 5 connector
D-6
www.ptsupply.com
marketing@ptsupply.com
Voice Grade Connectors
Part No. 41106R*6 - 6-conductor
USOC connector
Part No. 41108R*8 - 8-conductor
USOC connector
QuickPort® Color Ordering Chart
*Replace asterisk with color code in Part No. when
ordering. Example: 5G110R*5 White = 5G110RW5
Code
Color
W
White
T
Light Almond
A
Almond
I
Ivory
Y
Yellow
O
Orange
C
Crimson
R
Dark Red
P
Purple
L
Blue
V
Green
G
Grey
E
Black
B
Brown
800-238-7514
Local Area Network
Category 6 Jacks
Category 6 Jack Universal wiring
110 punch down exceeds all current
ANSI/TIA/EIA Category 6 specifications for connecting hardware. From
SMP Data Communications.
Part No. UMJA6xx*
Category 5E Jacks
AXCESS Snap-In Jack Category 5E, TIA/EIA 568A/B,
features 110 style connectors for a secure, direct
punch-down.
• Locking color/icon bezels provide distinctive jack
identification
• IDC contacts meet durability requirements of TIA
568-A with 26 AWG stranded through 22 AWG solid
conductors
• Maximum insulation diameter is .045"
From SMP Data Communications.
Part No. UMJA5Exx*
Category 3 Jacks
AXCESS Snap-In Jack Category 3,
110 Style IDC Connector on back for
26, 24 and 22 AWG solid conductors.
• Match conductor colors with factory
applied label
• 110 tool recommended for
termination
• Locking color/icon bezels provide
distinctive jack identification
From SMP Data Communications.
Part No. UMJL06Uxx* - USOC 6x6
Part No. UMJL08Uxx* - USOC 8x8
Part No. UMJL08ABxx* - 568A/B
Custom Color/Icon Bezels
Optional color/icon bezels provide
an effective method of colorcoding. A wide array of colors and
icons creates a distinctive easyto-use circuit identification
system. Standard package contains 20 pieces. From
SMP Data Communications.
Part No.*
Description
BE06xx
6 Position
BE06xxV
6 Position “Voice”
BE06xxD
6 Position “Data”
BE06xxF
6 Position “FAX”
BE06xxM
6 Position “MODEM”
BE08xx
8 Position
BE08xxK
8 Position "KEYED"
BE08xxV
8 Position “VOICE”
BE08xxD
8 Position “DATA”
BE08xxL
8 Position “LAN”
BE08xxF
8 Position “FAX”
BE08xxM
8 Position “MODEM”
APBLKxx
Blank Cover Insert
Multi-Application Adapters
When mounted, these adapters
give an unprecedented admission of quality. Flush to the
bezel, the AA Series Multimedia
Adapters meet all the application needs and provide outstanding aesthetics. From
SMP Data Communications.
Part No.*
Description
AABNCxx
BNC Adapter
AAFxx
F-Type Adapter
AARCAxx
RCA Adapter, Solder Type
AASTMMxx
ST Multimode Adapter
AASTSMxx
ST Single mode Adapter
AASCMMxx
SC Multimode Adapter
AASCSMxx
SC Single mode Adapter
Modular Jacks & Accessories Color Ordering Chart
*Replace xx with color code in
Code
Color
Part No. when ordering. Example:
00
Electrical Ivory
AASCSMxx Green = AASCSM04
01
Office White
Code
Color
Code
Color
04
Green
08
Orange
05
Blue
09
Yellow
02
Black
06
Data Gray
10
Purple
03
Red
07
White
11
Brown
www.ptsupply.com
marketing@ptsupply.com
800-238-7514
D-7
Local Area Network
QuickPort® Single-Gang Multi-Port
Wallplates
Single-gang flush mount wallplates offer field-configurable
flexibility in an attractive
single-piece housing. Fully
compatible with all QuickPort
Snap-in Modules including
connectors or blank fillers. UL Listed, CSA Certified
and listed in compliance with NEC Article 800.
Options for port identification include Labelware™
wallplate and housing labels, typed or handwritten
labels for designation windows, or the use of different
color QuickPort modules. All windows are field-label
compatible, and cover the wallplate security screw.
From Leviton.
QuickPort® Dual-Gang Multi-Port
Wallplates
Dual-gang flush mount
wallplates with designation
windows are designed in a
single-piece housing and a
wide choice of port counts for
maximum density. UL Listed, CSA Certified, and listed
in compliance with NEC Article 800.
Field configure with any combination of QuickPort
Snap-in Modules. Use different color QuickPort modules for port identification, or type or hand-write labels
for designation windows. All designation windows are
field-label compatible, and cover the wallplate security
screw. From Leviton.
Midsize QuickPort® Wallplates
Midsize wallplates provide
QuickPort modularity with 3/8"
more coverage than standard
wallplates. UL Listed and CSA
Certified. Expanded silhouette
provides designer look and easily hides irregular
drywall cuts or flaws around outlets.
The 4-7/8" x 3-1/8" plate is 3/8" wider and taller, and
matches Leviton’s Midsize Wallplates for electrical
devices and lighting controls. 1/4" depth ensures a clean
fit with various devices. Crafted from durable, smoothfinish nylon, wallplates fit a single-gang electrical box.
From Leviton.
D-8
www.ptsupply.com
marketing@ptsupply.com
Single Gang
Without Windows
Available colors:
White, Light Almond,
Almond, Ivory, Grey,
Black, Brown
Single Gang
With Windows
Available colors:
White, Ivory, Grey,
Black
Dual Gang
Available colors:
White, Ivory, Grey,
Black
Midsize Plates
Available colors:
White, Light Almond,
Almond, Ivory, Brown
Part No.*
Ports
410801xP
1
410802xP
2
410803xP
3
410804xP
4
410806xP
6
Part No.*
Ports
ID Windows
420801xS
1
1
420802xS
2
2
420803xS
3
2
420804xS
4
2
420806xS
6
2
Part No.*
Ports
ID Windows
420801xP
1
2
420802xP
2
2
420803xP
3
2
420804xP
4
4
420806xP
6
4
420808xP
8
4
4208012x
12
4
Part No.*
Ports
410911xN
1
410912xN
2
410913xN
3
410914xN
4
410916xP
6
*See Color Code Chart on page D-6.
Replace asterisk with color code in Part No.
when ordering.
Example: 5G110R*5 White = 5G110RW5
800-238-7514
Local Area Network
Standard Faceplates
Standard size faceplate, single gang, will accommodate
any AXCESS jack or adapter. From SMP Data
Communications. Included are two clear windows
and two identification card inserts for window
labels. Standard package quantity is 50 pieces.
Electrical Ivory or Office White. From SMP Data
Communications.
2.75
Part No.*
Ports
FPS01xx
1
FPS02xx
2
FPS03xx
3
FPS04xx
4
FPS05xx
6
Faceplate
Port
Dimensions
4.50
.685
Angled Faceplates
Accommodate all AXCESS jacks
or adapters. Included with a
four port single gang: two clear
windows, two identification card
inserts for window labels, 2-3/4" x
7/16" two color matching windows,
two #6-32 x 3/4" painted screws
and instruction sheet.
Included with an 8-port double gang: four clear
windows, four identification card inserts for window
labels, 2-3/4" x 7/16" four color matching windows,
four #6-32 x 3/4" painted screws, and an instruction
sheet. Electrical Ivory or Office White. From SMP Data
Communications.
Part No. FP04Axx* - 4 Port, Single Gang
Part No. DP08Axx* - 8 Port, Double Gang
.625
Oversized Faceplates
Oversize faceplate, single gang, will accommodate any
AXCESS jack or adapter. Included are one oversized
faceplate, two #6-32 x 3/4" painted screws and an
instruction sheet. From SMP Data Communications.
Standard Single Gang
With Clear Plastic Windows
Double Gang Faceplates
Double gang faceplate will accommodate any AXCESS
jack or adapter. Included are two clear windows, two
identification card inserts for window labels, four #6-32
x 3/4" painted screws and an instruction sheet.
Standard package quantity is 25 pieces Electrical Ivory
or Office White. From SMP Data Communications.
Part No.*
Ports
DP01xx
1
DP02xx
2
DP03xx
3
DP04xx
4
DP06xx
6
Part No.*
Ports
FPR01xx
1
FPR02xx
2
FPR03xx
3
FPR04xx
4
FPR06xx
6
4.56
Modular Furniture Faceplates
Faceplate
Port
Dimensions
4.50
.625
Double Gang
With Clear Plastic Windows
Faceplate Color Ordering Chart
*Replace xx with color code in Part No. when ordering.
Example: DP01xx Office White = DP0101
Code
Color
Code
Color
00
Electrical Ivory
02
Black
01
Office White
06
Data Gray
www.ptsupply.com
marketing@ptsupply.com
.685
Modular Furniture Faceplate 2 port Herman Miller (or
similar) or 4 port Steelcase (or similar) will accommodate any AXCESS jack or adapter. Data Gray or
Black. From SMP Data Communications.
Part No.*
Description
FAP2xx
Herman Miller 2 Port
FAP3xx
Steelcase 3 port
FAP4xx
Steelcase 4 port
800-238-7514
D-9
Local Area Network
Stainless Steel Faceplates
Rugged stainless steel,
Provides color coding and
labeling at the station,
Corrosion resistant, Locking
Bezel system protects the
connection, Keystone or Bezel
jacks and adapters can be used. Available in single or
double gang. From SMP Data Communications.
Part No.
Description
Part No.
Description
FP01SS
1 Port, Single Gang
DP01SS
1 Port, Double Gang
FP02SS
2 Port, Single Gang
DP02SS
2 Port, Double Gang
FP03SS
3 Port, Single Gang
DP03SS
3 Port, Double Gang
FP04SS
4 Port, Single Gang
DP04SS
4 Port, Double Gang
FP06SS
6 Port, Single Gang
DP06SS
6 Port, Double Gang
Receptacle Housing
2 ports will accommodate any AXCESS
jack or adapter. Included is plate assembly and two #6-32 x 1/2" screws. Electrical
Ivory or Office White. From SMP Data
Communications.
Part No. A106xx*
Receptacle Housing Faceplates
Single or double gang faceplates will
accommodate receptacle housing.
Electrical Ivory or Office White. From
SMP Data Communications.
Part No. FPExx* - 2 Port, Single Gang
Surface Mount Enclosures
Surface Mount Enclosure
will accommodate any
AXCESS jack or adapter.
Knock-outs on three
sides as well as in base
for cable entry. Included
are eight designation tabs, one blank port cover,
mounting screws, designation window/s with card/s,
color matching window/s, double-sided tape and cable
ties. Electrical Ivory or Office White. From SMP Data
Communications.
Part No. SME2xx* - 2 Port
Part No. SME4xx* - 4 Port
D-10
www.ptsupply.com
marketing@ptsupply.com
Surface Mount Boxes
Surface Mount Box, single
gang, will accommodate any
single gang or double gang
faceplate. Knockout on four
sides and base. Single gang
5.25" H, 3.5" W and 1.54" D.
Included is a base, top, mounting screws, double-sided
tape and cable ties. Electrical Ivory or Office White.
From SMP Data Communications.
Part No. SMSGxx* - For single gang faceplates
Part No. SMDGxx* - For double gang faceplates
eXtreme® 6+, GigaMax™ 5E and
QuickPort® Angled Patch Panels
Increase density and
enhance cable management.
All panels are 48-port and
are available pre-configured
or field configurable using QuickPort jacks. Pre-loaded
panels feature 110-style punch downs. Dimensions are
3.5" H x 19" W x 4.8" D. All panels are cULus listed
and A-Tick compliant. From Leviton.
Angled Patch Port Panels
Part No. 69587U48 - eXtreme 6+ Angled Patch Panel
Part No. 5G597U48 - GigaMax 5E Angled Patch Panel
Part No. 49256H48 - QuickPort Angled Patch Panel,
sold empty
Angled Pre-Configured Panels
Part No. 69271U48 - eXtreme 6+ Angled
Pre-Configured Patch Panel
Part No. 5G271U48 - GigaMax 5E Angled
Pre-Configured Patch Panel
Angled Panel Accessories
Part No. 49006AMB - Angled cable management bar,
rear (four hook and loop fasteners included)
Part No. 49262HR1 - Vertical transition ring (horizontal cable ring), 2/box
Part No. 49254BA2 - Front blank angled panel, 2RU
Part No. 49254BA1 - Front blank angled panel, 1RU
Part No. 49254BC1 - Transition Cover
SMP Data Communications Color Ordering Chart
Code
Color
00
Electrical Ivory
01
Office White
*Replace xx with color code in
Part No. when ordering.
Example: SME2xx Office
White = SME201
800-238-7514
Local Area Network
eXtreme® 6+ Universal Patch Panels
Exceed published
Category 6 standards.
12-, 24-, 48- and 96-port
panels come preconfigured with 110-style punchdowns on the rear and the
six-port RJ-45 front modules. Rear designation labels
are reversible, with color-coded diagrams for T568A,
T568B and 25-pair wiring configurations.
Panels mount on standard 19" equipment racks, are
cULus listed and A-Tick compliant, and fully comply
with published Category 6 standards. From Leviton.
Ports
Size
length x height (in)
69586U12
12
1-3/4 x 19
69586U24
24
1-3/4 x 19
69586U48
48
3-1/2 x 19
69586C48
48 (central label)
3-1/2 x 19
69586U96
96
7 x 19
Part No.
Category 5E Patch Panels
Offer users the highest level
of headroom of any Cat 5E
link or channel. The panels
exceed EIA/TIA 568-B.2 Cat
5E standards and are ISO/
IEC11801 compliant.
Available in wall mount style with 12-24 ports or rack
mount style with 12-120 ports. IDCs withstand 200
wire insertions. Universal TIA 568A/B wiring configuration. The rigid panel design provides a solid frame
for high-impact punching tools.
• 100BASE-T Gigabit
• 270 Mbps ATM
Ethernet
• 100 Mbps TP-PMD
• 100BASE-TX Fast
• 100 VG AnyLan
Ethernet
• 4/16 Mbps Token Ring
• Broadband video
• Voice
From SMP Data Communications. Call for details.
Category 5E Patch Panel Blocks
eXtreme® 6+ QuickPort® Patch Panels
High density and come preloaded with black eXtreme
6+ connectors and are available in 24- and 48- port
versions. Panels come with a wire management bar.
Connector rear-termination field ensures easy accessibility and accommodates T568A or T568B wiring
configurations. cULus listed. From Leviton.
Ports
Size
length x height (in)
69270U24
24
1-3/4 x 19
69270U48
48
3-1/2 x 19
Part No.
Category 6 Patch Panels
Provide connectivity flexibility
while maintaining all the Category
6 requirements on a component
level. 19" rack mountable with
universal wiring for 568A or 568B. 110-style punch
down mounted on a patented PC-Board platform.
Exceeds all current ANSI/TIA/EIA Category 6 specifications for connecting hardware. From SMP Data
Communications.
Part No. DCC1688110SIX - 16 port
Part No. DCC2488110SIX - 24 port
Part No. DCC4888110SIX - 48 port
Selections in 12-port to 120-port also available. Call for details.
www.ptsupply.com
marketing@ptsupply.com
Perfect for any small quantity patching.
Wall mountable using SMP’s 89D bracket,
the PP12A5E provides 12 vertical RJ-45
ports. Patented PC board technology,
All plastic components rated 94V-0,
Cost effective, 568A/B wiring configurations, and IDC contacts are phosphor
bronze plated with tin. From SMP Data
Communications.
Part No. PP12A5E
Shielded Patch Panels
Shielded patch panels
are available in 12- to
120-port configurations
with fully shielded RJ-45
jacks. Cat 5E panels are
110-style, Cat 6 panels are
568A/B wired. From SMP Data Communications. Call
for details.
High Performance Patch Cords
Available with or without boot.
• Category 6 Patch Cords
• Category 5 Patch Cords
• Category 5E Patch Cords
From SMP Data Communications.
Call for details.
800-238-7514
D-11
Local Area Network
Home Axcess™ Enclosures
From enclosure to outlet, Home
Axcess enclosures offer a complete,
cost-effective structured wiring
solution for residential customers.
Provides a convenient method for
networking, customizing and
distributing all of the electronic
services in the home, including
voice, data, video, audio and
security, all from one central
location. From SMP Data
Communications.
Part No.
Size (in)
Description
HAXEXTEND
2
Extender frame for 31" enclosures
HAX201H
20
Enclosure with hinged cover (one bracket)
HAX203H
20
Enclosure with hinged cover (three brackets)
HAX201
20
Enclosure with solid cover (one bracket)
HAX203
20
Enclosure with solid cover (three brackets)
HAX301H
31
Enclosure with hinged cover
HAX301
31
Enclosure with standard cover
HAXBOX
31
Enclosure, no cover
HAXHCOVER
31
Hinged cover
HAXCOVER
31
Standard cover
Multiple Service Distribution
Enclosures
Home Axcess™ MSDE™
enclosures distribute high-speed
data, communication and video
services in a residential setting.
Enclosures knock out on top,
bottom and side for easy cable
entrance. 10.62" H x 14.38" W x
3.12" D. From SMP Data Communications.
Empty Enclosures
Part No. MSDET000D00V0 - Enclosure with
3-position bracket, hinged cover and J-box cutout
Part No. MSDET000D00V0AC - Enclosure with
3-position bracket, hinged cover and J-box kit
Part No. MSDEBOX1 - Enclosure with 3-position
bracket, no cover and J-box cutout
Part No. MSDEBOX2 - Enclosure with no bracket, no
cover and J-box cutout
Part No. MSDEDOOR - Standard hinged cover
Pre-configured Enclosure Ordering Matrix
Add part specification code to MSDE base code when
ordering, i.e. MSDET406DA5V4LCK.
Specification
Home Axcess Networking Switches
™
10/100BASE-T Ethernet
switches with power supply can
be added to any Home Axcess
or MSDE™ Enclosure to allow
the networking of four different computing devices.
Mounting hardware is included.
Part No. HAX5100S - 5-port switch
Part No. HAX8100S - 8-port switch
Voice
Voice Module
Data
568A, Category 5E
Data Board
Video
Bi-directional
Splitter
Options
D-12
www.ptsupply.com
marketing@ptsupply.com
Code
Description
T406 =
4x6
T408 =
4x8
T410 =
4x10
T606 =
6x6
T608 =
6x8
T610 =
6x10
DA5 =
5-port
DA6 =
6-port
DA7 =
7-port
DA8 =
8-port
V4 =
1x4 1 Ghz
V6 =
1x6 1 Ghz
V8 =
1x8 1 Ghz
V4S =
1x4 2 Ghz
V6S =
1x6 2 Ghz
V8S =
1x8 2 Ghz
LCK =
Locking Cover
JCK =
2-jack Interface Cover
SCK =
Solid Cover
AC =
Knockout with J-Box
LAC =
LCK and AC Option
JAC =
JCK and AC Option
SAC =
SCK and AC Option
800-238-7514
Local Area Network
Cabinets
Base unit has solid metal construction
with vented top, 19" or 23" mounting
rails, 12 gauge steel in wood grain
or black trim, casters or adjustable
rubber feet and package of mounting
screws. From Great Lakes.
Stock Colors: Nitro Blue, Profile Gray
and White (other colors available)
Shipping Weight: 200 lbs
Dimensions: 72"H x 29"W x 26"D
(70" Mounting Space)
Part No. 7201 - Base unit
Part No. 7202E24 - Plexiglas door with lock
Part No. 7204 - Steel rear door with lock (upper half
vented)
Part No. 7210 - Removable side panels (solid) pair
Part No. 7215 - 16 position power strip with circuit
breaker and 12' cord
Wall Mount Enclosure
The new 32" deep WD Wall Mount
Series features an optional dust
resistant kit that contains filters and
panels to seal vents and openings. UL
Listed.
• Two pair of fully adjustable, tapped 19" EIA 12-24
mounting rails are fully adjustable
• Unique hinge system allows removal of the rear
section for easy installation
• Casters also available to make the enclosure free
standing and hold extra weight
• Stock color: black
From Great Lakes.
Part No.
Dimensions
h x w x d (in)
Weight
Cap (lb)
Rack
Units
Door
Type
Ship. Wt.
(lb)
GL24WD
24 x 24 x 32.13
250
11
Solid
125
GL24WDS
24 x 24 x 32.13
250
11
Plexiglas
125
GL36WD
36 x 24 x 32.13
300
18
Solid
150
GL36WDS
36 x 24 x 32.13
300
18
Plexiglas
150
GL48WD
48 x 24 x 32.13
350
25
Solid
200
GL48WDS
48 x 24 x 32.13
350
25
Plexiglas
200
www.ptsupply.com
marketing@ptsupply.com
Wall Mount/Swing Out Enclosure
Provides 19" rack mounting in
a distribution enclosure. Simple
finger “push-pull” type catch located
inside the cabinet opens the 18"
deep center swing section. The
center swing-out feature provides
outstanding front and rear access to cables/equipment.
From Great Lakes.
Part No. GL2418WM - Plexiglas door
Part No. GL2418WMS - Solid door
Other sizes also available.
Server Enclosure
• 3/4" anchoring holes allow easy access
for bolting enclosure to floor
• M6 rails are infinitely adjustable front to
rear via slots and sliding nuts
• Maximum rail spacing, front to rear, is
36"; three pair of rails included
• Networking of cabinet frames is accomplished by bolting them together through
holes in the side faces of the corner posts
with common 1/4-20 hardware.
From Great Lakes.
Part No. GL840ES2942 - 42" Deep enclosure
Other sizes also available.
Wall Mount Swing Rack
• More Vertical Rack Space
• Black stock color
• 100 lb. weight capacity
• EIA spacing with 12-24 threaded holes
per TIA/EIA 310-D
• “Stay-open” hinge pins
• Provisions for optional Cable
Management Cinch Straps
• 180° positive stop; swings open left or right
From Great Lakes.
Part No. GL24SR - 24" Rack
Part No. GL36SR - 36" Rack
Part No. GL48SR - 48" Rack
Part No. GL2418WMS - Solid door
Other sizes also available.
800-238-7514
D-13
Local Area Network
Cable Management Relay Rack
7' H - 19" EIA relay rack designed
to manage high-density network
equipment. Steel construction,
black powder finish. 16 cable
rings, which can be placed on the front or
back, are included. From Great Lakes.
Part No. CMR84
Cable Management Ring
Used for vertical cable runs on most
rack mounted equipment. The size
accommodates larger cable bundles.
Multiple mounting options; heavy duty
steel construction black powder coat finish.
From Great Lakes.
Part No. CM425
Heavy-Duty Relay Rack Shelves
(2) 1984ST09
(1) 1984ST15
(1) 1984ST09
1984ST09
1984ST15
(2) 1984ST15
19" EIA relay rack mounting, 75 lb. distributed weight
capacity per single shelf or 150 lb. per double sided shelf.
Mount to drilled double sided racks. From Great Lakes.
Part No. 1984ST09 - Single sided, 9" deep
Part No. 1984ST15 - Single sided, 15" deep
BNC Twist-On Plug
Part No.
Cable Type
CBN1110
RG-59/62 PVC
CBN1111
RG-59/62 Plenum
CBN1116
RG-58 Plenum
D-14
www.ptsupply.com
marketing@ptsupply.com
Interseries Adapters
Part No.
Cable Type
CAD1000
CAB1020
75 Ohm BNC "T" Female to Male to Female
CAB2000
75 Ohm BNC In-Line Splice Female to Female
CAB2005
75 Ohm BNC Female to F-Male
CAD1000
BNC In-Line Splice Female to Female
CAD1003
Male to Male (plug to plug)
CAD1010
BNC Female to RCA Male
CAD1020
BNC Tee Female to Male to Female
CAD1025
"T" Female to Female to Female
CAD1030
RCA Female to BNC Male
CAD1035
F-Female to BNC Male Adapter
BNC Connectors
Part No.
Cable Type
CBB2210
75 Ohm 2PC Male Crimp, RG-59/62
CBB2211
75 Ohm 2PC Male Crimp, RG-59TFE
CBB2214
75 Ohm 2PC Male Crimp, RG-6U
CBB2219
75 Ohm 2PC Male Crimp, Belden 8218
CBB3210
75 Ohm 3PC Male Crimp, RG-59/62
CBB3214
75 Ohm 3PC Male Crimp, RG-6U
CBB3219
75 Ohm 3PC Male Crimp, Belden 8218
CBB3220
75 Ohm 3PC Male Crimp, Belden 8281
CBN2110
2PC Male Crimp, RG-59/62 PVC
CBN2111
2PC Male Crimp, RG-59/6 Plenum
CBN2112
2PC Male Crimp, RG-58 PVC
CBN2114
2PC Male Crimp, RG-6 PVC
CBN2115
2PC Male Crimp, RG-6 Plenum
CBN3110
3PC Male Crimp, RG-59/62 PVC
CBN3111
3PC Male Crimp, RG-59 Plenum
CBN3112
3PC Male Crimp, RG-58 PVC
CBN3114
3PC Male Crimp, RG-6 PVC
CBN3116
5PC Male Crimp, RG-174
CBN3117
3PC Crimp, RG-59 PVC and Plenum
CBN3118
3PC Male Crimp, RG-11 PVC
CBN3121
3PC Male Crimp, RG-58 Plenum, Thin Net
CBN3210
3PC Female Crimp, RG-59 PVC
CBN4032
1/2" Diameter Bulkhead Double Female
CBN9110
Male Compression with Red Ring, RG-59 PVC
CBN9114
Male Compression with Blue Ring, RG-6 PVC
800-238-7514
Local Area Network
CAT-Universal Compression
Assembly Tool
Splice Adapter
Part No.
Cable Type
CFS0186
RG-59/6
• Plunger tip can be changed out to
allow assembly of other compression connectors (EX and SPL)
• Calibration/gauge block and hex
wrench supplied with tool
From Cablematic.
Part No. 361751
“F” Series
CFC7120
Part No.
Cable Type
CFC5175
75 Ohm Female Terminator
CFC7120
“F” Plug w/ 1/5" Crimp Ring, RG-11 PVC
CFC7112
Male “F” Plug ALM, RG-59 Plenum
CFC7111
Male “F” Plug F59ALM w/ 1/2" Crimp Ring, RG-59 PVC
CFC7114
CFC7115
Standard Cable Ties
Part
No.
Government
Designation
Min. Tensile
Unlocking
Strength (lb)
Max.
Bundle
Dia. (in)
Approx.
Length (in)
Approx.
Width
(in)
Male “F” Plug w/ 1/2" Crimp Ring, RG-6 PVC
T18S
MS3367-4
18
5/8
3-3/8
.08
Male “F” Connector F56ALM w/ 1/2" Crimp Ring, RG-6
Plenum
T18R
MS3367-4
18
3/4
4
.1
T18I
MS3367-4
18
1-1/4
5-3/4
.1
CFC7118
Male "F" Crimp Plug, RG-11 PVC
T18L
MS3367-4
18
2
8
.1
CFC7125
“F” Straight Plug, RG-6 Quad Shield PVC
T30R
MS3367-5
30
1-1/4
6
.14
CFC7314
Male "F" Crimp Plug Weatherproof w/ O-Ring and Gel,
RG-6
T30M
-
30
2
8
.14
T30I
-
30
3
11-1/4
.15
CFC8114
Male "F" Compression, RG-6
T30L
-
30
4
14-1/2
.15
CFC8116
Male "F" Compression w/ Green Ring, RG-6 Quad
T40R
MS3367-1
40
2
8-1/2
.15
CFS0181
81 In-Line Splice Female to Female
T40I
MS3367-7
40
3
11-1/2
.15
CFS0182
81 In-Line Splice Female to Female w/ nut and washer
T40L
MS3367-2
40
4
14-1/2
.15
“F” Crimp Plug, Thin RG-59/62 Plenum
T50S
-
50
1-1/4
6-1/2
.18
T50R
MS3367-1
50
1-3/4
8
.18
T50I
MS3367-7
50
3
11-3/4
.18
T50L
MS3367-2
50
4
15-1/2
.18
257035
BNC Terminators
With chain
Part No.
Cable Type
CBN5150
50 Ohms Coax
CBN5175
75 Ohms Coax
Specify 100 per bag or 1,000. From HellermannTyton.
Halar™ Ties
With chain
CBN5250
50 Ohms Coax
279246
75 Ohms Coax
CAT-AS ‘All Series’ Compression
Assembly Tool
• Allows assembly of series 59/6, 7, and
11 drop connectors in one versatile
tool
• Two sets of jaws, precision designed
– one set for 59 and 6 connectors, and
another set for 7 and 11 connectors
From Cablematic.
Part No. 37720
www.ptsupply.com
marketing@ptsupply.com
These cable ties have a lower
smoke density when burned
and are NEC approved for use
in plenum spaces. Halar ties
have a UL flame rating of
94V-O and come in a standard
color of red for easy identification. 100 cable ties per
package. From HellermannTyton.
Part No.
Min. Tensile
Unlocking
Strength
Max. Bundle
Dia. (in)
Approx.
Length (in)
Approx.
Width (in)
T18R2HAL
18
7/8
4
.1
T30R2HAL
30
1-1/4
6
.14
T50R2HAL
50
1-3/4
8
.18
T50L2HAL
50
4
15.5
.18
T120R2HAL
120
4
15.25
.18
800-238-7514
D-15
Local Area Network
Telephone Cable Pic-Pac
An easy method of identifying binder
system groups in PIC cable through the use
of striped and solid cable ties. Each Pic-Pac
contains 1,300 ties, including 50 each of
the 24 most popular color combinations of
striped ties, as well as solid red and solid
black ties. All 26 different ties are packaged in easy-open bags of 50.
Pic-Pac cases are made from a heavy duty
laminated vinyl suited to cold weather
environments, resistant to cable gel,
and can be cleaned inside and out. The
reinforced pockets are interlined with foam cushion to
ensure that ties remain tightly packed, even when only
a few ties are left. Two convenient snaps allow the PicPac to be easily hung or folded. From HellermannTyton.
Part No. T18RPICPAC
Rite-On Self-Laminating Wire Markers
Surface Raceways
A one-piece, non-metallic,
adhesive-backed latching
raceway designed to
aesthetically organize and
route Category 5 UTP cable
and fiber optic cable from the
telecommunications closet to
the work station.
Fill Capacity
•
One piece design allows easy
Chart Available
installation and provides a
larger cross section for more wire and cable capacity
• Tamper resistant, self-locking, hidden positive latch
providing secure installation of wire and cable
• Flexible hinge allows numerous openings without
creating discoloration or stress cracking
• Available in 6' and 8' lengths and three widths
(3/4", 1/2", 1-3/4") with a full range of fittings and
accessories
From HellermannTyton. Call for details.
The Rite-On tape dispenser is a
flexible compact system designed
to identify electrical, CATV coax,
conduit, and large wire bundles.
Rite-On wire markers seal the
legend under clear vinyl which
has a high tack adhesive that resists flagging, dirt, oil,
water, alcohol, fungus, abrasion and temperature
extremes. The durable throw-away dispenser provides
a flat surface for writing on the white background
marker. When coupled with the non-smear FTP nylon
marking pen, marking is fast and economical. From
HellermannTyton.
Part No.
Write-on Area
width x length (in)
Marker Size
width x length (in)
Markers
per Roll
RO514
3/4 x 5/16
3/4 x 1-1/4
300
RO512
3/4 x 1/2
3/4 x 1-7/8
150
RO175
3/4 x 3/4
3/4 x 3
90
RO101
3/4 x 1
3/4 x 6
40
Call for wire size ranges. Black and white markers are available.
D-16
www.ptsupply.com
marketing@ptsupply.com
800-238-7514
Local Area Network
Snake Tray™
FlexTray®
Adapts to any installation, allows you to make turns
and change levels without cutting or modifying the
tray, and is completely hand bendable with no cutting
required.
This flexible system offers you flexible solutions.
Available in Electro-Galv or Black E-Coat.
Choose from a large selection of products designed to
fit your individual on-the-job needs, including: Straight
Sections, Support Methods, Splicing Methods and
accessories.
Features
• No cutting or clipping or sharp edges
• Completely hand bendable cable tray
• Built-in mounting hardware
• Both UL and C-UL Listed
• NEC compliant
• Meets TIA/EIA standards
• Unique design dissipates stray EMI signals
• Trays clamp together with a single connector bolt
Straight Sections
Electro-galv has no suffix - add BLE for Black e-coat
Part No.
Dimensions
(depth x width x length)
FT15410
1.5" x 4" x 10'
FT15610
1.5" x 6" x 10'
FT151010
1.5" x 8" x 10'
Benefits
• Easy Installation – A wrench is the only tool
needed. The center rail design provides an open
architecture, allowing for easy cable loading.
• Lowers Costs/Saves Time – With NO CUTTING
required to create bends or drops, installation time is
cut in half. Just bend the tray to any shape you need
to complete the installation.
• Stable Construction – Snake Tray is produced
from high strength zinc plated steel. Supports a high
volume of cables and is resistant to corrosion. The
open design makes cable identification easy while
also providing proper ventilation.
FT151210
1.5" x 12" x 10'
FT4810
4" x 8" x 10'
Call for details.
FT41210
4" x 12" x 10'
FT41610
4" x 16" x 10'
FT41810
4" x 18" x 10'
FT42010
4" x 20" x 10'
FT42410
4" x 24" x 10'
FT2210
2" x 2" x 10'
FT2410
2" x 4" x 10'
FT2610
2" x 6" x 10'
FT2810
2" x 8" x 10'
FT21210
2" x 12" x 10'
FT21610
2" x 16" x 10'
FT21810
2" x 18" x 10'
FT22010
2" x 20" x 10'
FT22410
2" x 24" x 10'
FT4410
4" x 4" x 10'
6" Depth & Widths up to 38" available.
Call for more information and to receive spec. sheets
on Straight Sections, Support Methods and Splicing
Methods.
www.ptsupply.com
marketing@ptsupply.com
800-238-7514
D-17
Local Area Network
CableCat™ Hanging System
For Cat 5 cable and high performance communications
cable. Designed for unshielded twisted pair (UTP)
cables and optical fiber cables. It provides strain relief
and routes cables so the bend radius conforms with
TIA/EIA-568-A standards.
Hanging Systems
Part No.
Fig No.
Description
Std.
Pkg.
CAT21
1
Up to 50 cables of 4 twisted pair or fiber
optic and innerduct 1-5/16" - dia. loop
80
CAT32
1
Up to 80 cables of 4 twisted pair or
fiber optic and innerduct - 2" dia. loop
80
CATHBA
2
Angled hanger bracket
40
S3575BP100
3
1/4"-3/8" round head screw
S3575DP100
3
CATTRC
4
CATKITA
CATKITB
CATKITC
D-18
Fig No.
5
5
5
Part No.
1-5/16"
Dia. Loop
Pre-Riveted
Factory Assemblies
2" Dia. Loop
Fig. No.
Description
CAT21528
CAT32528
6
Cable to acoustical tee bar
CAT21BC
CAT32BC
7
1/8" thru 1/2" flange
100
CAT21BC200
CAT32BC200
8
1/8" thru 5/8" flange
1/2"-3/4" round head screw
100
CAT2124SM
CAT3224SM
9
1/8" thru 1/4" flange
1 Plenum rated tie wrap (optional)
100
CAT2158SM
CAT3258SM
9
5/16" thru 1/2" flange
CAT21912SM
CAT32912SM
9
1/2" thru 3/4" flange
CAT2124
CAT3224
10
1/8" thru 1/4" flange, bottom mount
rotates 360°
CAT2158
CAT3258
10
5/16" thru 1/2" flange, bottom
mount rotates 360°
CAT21912
CAT32912
10
1/2" thru 3/4" flange, bottom mount
rotates 360°
CAT21VF14
CAT32VF14
11
1/16" thru 1/4" vertical flange
10 pieces CAT21
10 pieces CAT32
5 pieces CATHBA Hanger
5 pieces Beam Clamps
20 pieces Tie Wrap (plenum-rated)
Screws
CAT21AF14
CAT32AF14
12
1/16" thru 1/4" Z Purlin
CAT214Z34
CAT324Z34
13
#12 thru 1/4" wire, plain or threaded rod and 1/8" thru 3/8" flange
CAT216Z34
CAT326Z34
13
3/8" plain or threaded rod and
3/8" thru 9/16" flange
20 pieces CAT21
5 pieces CATHBA Hanger
5 pieces Tie Wrap (plenum-rated)
Screws
CAT21AB
CAT32AB
14
Angle Bracket
CAT21BCB
CAT32BCB
15
1/8" thru 1/2" flange
CAT21BC200B
CAT32BC200B
16
1/8" thru 5/8" flange
Kits for Cat 5 Hangers
Part No.
Unique extra-wide base provides cable support on a
flat surface, eliminating kinking, bending and crimping. Available with 1-5/16" and 2" diameter loops and
accommodates up to 80 cables of 4 twisted pairs, as
well as fiber optic cable and innerduct. Installs quickly
and easily without any special tools. From Erico
Products.
Description
20 pieces CAT32
5 pieces CATHBA Hanger
5 pieces Beam Clamps
20 pieces Tie Wrap (plenum-rated)
Screws
www.ptsupply.com
marketing@ptsupply.com
800-238-7514