Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE
5" Frame-in
Recessed frame-in rated Non-IC.
LQJ
Approved for all ceiling and wiring types.
Remodel applications.
CONSTRUCTION
Steel frame. Cutout section on frame for remodel applications.
Galvanized bar hangers span up to 24” o.c. and feature built in nailer and
T-bar clips.
FLUORESCENT
Non-IC
New Construction
Galvanized steel junction box with four built in romex clamps; six ¾”
knockouts with slots for pryout.
Rated for through branch wiring.
Maximum 8 (4in 4out) No 12 AWG conductors. Rated for 90° C.
Ground wire provided.
Removable J-box doors for easy access.
Specifications
ELECTRICAL SYSTEM
Durable two-pin positive latch thermoplastic socket mounted in socket cup.
Height: 3-1/2 (8.9)
Socket assembly attaches to reflector to ensure proper and consistent
lamp position.
Trim height varies
Thermal protection provided against improper insulation use.
Width: 11-5/8 (29.5)
Height varies.
See trim.
Length: 13 (33.0)
Encased-and-potted, normal power factor (NPF) electromagnetic ballast
is standard.1
5-3/4" (14.6)
11-1/2" (29.2)
INSTALLATION
2 x 8 wood joist or T-bar installation.
Expandable bar hangers allow for off center mounting in wood joist or Tbar ceilings.
7-5/8"
(19.4)
Length of 25-1/4” maximum 13-1/4” minimum or cut to fit 10-1/2” on center
joist construction.
Retaining clips hold finishing trim secure and snug to ceiling.
Maximum ceiling thickness determined by finishing trim. See specific trim page.
5-3/4" (14.6)
Ceiling cutout 5-3/4”.
LISTING
All dimensions are inches (centimeters).
UL Listed to US and Canadian safety standards.
Example: LQJ 13DTT 120 JO1
Damp location listing (See trim selection for wet location listing).
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: LQJ 13DTT 120 JO1
LQJ
Series
Lamp
Volt
LQJ
13DTT
120
277
347
Accessories:
Order as separate catalog number.
LBH 22" extended bar hangers, set of two
LSMC T-bar mounting clips, set of four
Downlighting and Track
Reflector 2
Options
GMF
Open narrow flange
JO1
White open
JO1A
Clear specular open
JO1GZ Gold specular open
JB1
Black metal baffle
JB1W
White metal baffle
JB4 Black baffle
JB4W
White baffle
JC1BLZ Black specular cone
Single slow-blow fuse
NOTES:
Not recommended for use with occupancy sensors, device may
reduced lamp life or premature failure. Consult lamp manufacturer.
2 Trim ring white as standard.
See trim summary on reverse side for maximum wattages.
1
Sheet #: LQJ-COM
CCFL-140
J Series 5" Fluorescent LQJ Full Reflector Trims
Description
Catalog number
Maximum wattage
Sheet number
General/Task
Open Narrow Flange
JO1
White
JO1AZ
Clear Specular
JO1GZ
Gold Specular
13 DTT
Non-IC
COPN-170
Cone Narrow Flange
JC1AZ
Clear Specular
JC1BLZ
Black Spedular
JC1GZ
Gold Specular
13 DTT
Non-IC
COPN-180
Metal Baffle Narrow Flange
JB1
Black
JB1W
White
13 DTT
Non-IC
CBAF-180
Baffle Narrow Flange
JB4
Black
JB4W
White
13 DTT
Non-IC
CBAF-190
NOTES:
1 Maximum wattage listed. Lower
wattage lamps may be used.
Lithonia Lighting
Sheet #: LQJ-COM
© 2001 Acuity Brands Lighting, Inc., Rev. 2/9/09
Recessed Downlighting
One Lithonia Way, Conyers, GA 30012
Phone: 800-315-4935 Fax: 770-918-1209
www.lithonia.com