PhD THESIS CATALOGUE
Year
Student
1994 W Ahn
2008 A S al Hajri
1959 J A Allen
2010 O N Alshroof
2005 R Al-Waked
2003 S Amornsawadwatana
2005 M J Andrewartha
2008 M Anityasari
1988 A Ariel
2000 N A Armstrong
2004 A Aschner
1983 F R Ashe
1998 G Atashbaz
1993 C K Au
1972
1986
1975
1989
1975
2000
2002
1982
A M Aziz Ul Huq
K N Badia
J E Baker
F T Balzer
H Bao
T Barber
A Basu
P Bath
1999 J Bau
1980 J Baxter
1996 M Bazargan-Lari
1989 D R H Beattie
1994 M Behzad
1973 P R Bell
2002 C Benjapiyaporn
1964 G Bennett
1987 B Ben-Nissan
2009 C C Beves
1980 Y P Bhasin
1998 D F Bicleanu
1996 B Bigdelli
1972 O Bils
1976 C J Bird
1983 A J Black
@ 31/03/2011
Thesis Title
Tool Breakage and Tool Wear Monitoring in Milling using the Methodology
of Time Series Analysis
Logistics Technology Transfer Model
Experimental Studies of Drying Grain Under Conditions of Low Heat Input
Computational Study of Laminar Flow Heat Transfer Enhancement by
Dimples and Protrusions
Development of Performance-Improving Structures for Power Station
Cooling Towers
Risk Management in Multi-Site Concurrent Engineering Projects
Application of Hydrofoils to Improve the Performance of High-Speed
Catamarans
Reuse of Industrial Products – A Technical and Economic Model for
Decision Support
Towards an Innovative Integrated Management System for Overseas
Distribution of Dry Bulk Edible Commodities
On the Viscous Resistance and Form Factor of High-Speed Catamaran-Ferry
Hull Forms
Planning for Sustainability through Cleaner Production
Errors of Prediction in Markov Chains with a Superabundance of Possibly
Irrelevant Data
Investigation of Asymmetry of Vortex Flow over Slender Delta Wings
The Acoustic Performance of Plane Laggings and Similar Multi-Layer
Acoustic Structures
A Study of Bubble Formation and Departure
Causes and Prevention of Occupational Repetitive Strain Injuries
Studies in Instantaneous and Full Cycle Mobility of Linkages
An Optimization Model for Defence Budgeting
An Investigation of Built-Up Edge Formation in the Machining of Aluminium
A Study of the Aerodynamic Characteristics of Ground Effect Flight
The Finite Volume Analysis of Damaged Boiler Tubes
Optimal Strategies for Regional Energy Systems Evaluation using Linear
Programming
Residual Stress and Fracture Toughness Determination Applied to
Aluminium Gas Cylinders
Non-Linear Modelling of the Automobile Driver in the Presence of Minimal
External Disturbance
An Integrated Approach to the Intra-Cell and Inter-Cell Degrees in a Cellular
Manufacturing Environment
An Extension of Single Phase Flow Turbulent Pipe Flow concepts to Two
Phase Flow
Transfer Matrix Analysis of Rotor Systems with Coupled Lateral and
Torsional Vibrations
Detection of In Core Boiling by Neutron Measurement
The Effects of G-Jitter on Mixing, Convection and Solidification
The application of Probability Theory to the Allocation of Engineering
Tolerances
Three Dimensional Modelling and Finite Element Distribution Analysis of
the Mandible
An Investigation into the use of Low Aspect Ratio Spherical Wells to Reduce
the Flow Separation on an Inverted Wing in Ground Effect
An Experimental and Theoretical Investigation of the Deformation in Plane
Strain Wedge Indentation
Experimental and Theoretical Investigations into the Laser Cutting of Metals
with a Pulsed ND:YAG Laser
An Investigation of C*-Convergence in the Finite Element Method
Noise Propagation in One Dimensional Systems
A Branch and Bound Approach to an Aircraft and Maintenance Scheduling
Problem
A Theoretical and Experimental Investigation of the Interaction of Model
1986 J Blackwell
1960 S E Bonamy
1975 P J Brockhurst
2004 G Brown
2005
1970
1970
2009
1997
I Budihardjo
D R A Budney
A Cabelli
M Caresta
A A Cenna
1994 K C Chan
2001 N Charoenchai
1977 L Chen
1974 P Y P Chen
2006 W W Cheng
1980 H F Cheung
2007 W L Chia
2001 A C K Choi
1994 I-S Choi
2006 J W Choi
1970 A E Churches
1990 M C Coles
1998 M C Cook
1991 T J Crick
1992 T J Crick
2005 J Cronin
1996 A S Dadgostar
1974 L Davidson
2009 N S Diasinos
2010 L P Djukic
1995
1981
1987
1997
P Di Pietro
T Doan
E W Donnelly
S Du
2001 A Durie
2009 M Efatmaneshnik
1998 A Eghlimi
2006 M El Hayek
2005 Z El Kurdi
2010 R Ekanayake
2003 D M Ellerman
1988 B N Emerson
2005 H Endo
Asperities in Metallic Sliding Friction
Propulsion Performance of a Lifting Flapping Wing
An analysis of the Otto Cycle Taking into Consideration the Effect of
Varying Operating Parameters
Design of total Hip Prosthesis - the Femoral Stem
A Generalised Rail Vibration Model for Wheel-Rail Rolling Noise Prediction
with Application to a Non-Standard Rail System
Evacuated Tubular Solar Water Heaters
Reinforced Openings in Plastically Deformed Plates
A Numerical Study of the Benard Cell
Structural and Acoustic Responses of a Submerged Vessel
Theoretical and Experimental Investigations into Laser Cutting of Composite
Materials
Intelligent Control Techniques for Feedback Controller Tuning Applications
Development of a Knowledge-Based System for Design, Selection and Use
of Non-Powered and tools (Tool Expert)
The Numerical Study of Bubble Growth Dynamics
Thermo-Mechanical Modelling of Reactor Fuel Elements
Enhancing the Heat Transfer Performance of Compact Heat Exchangers by
Minimising the Contact Resistance between Fins and Tubes
High Order Accurate Numerical Method Study and its Application to
Simulation of Air Motion and Thermal Distribution in Air Conditioned
Space
Multiple-Input Multiple-Output (MIMO) Blind System Identification for
Operational Modal Analysis using the Mean Differential Cepstrum (MDC)
Waste Impact Assessment of Manufacturing Processes for Product Design
Evaluation
Dual Fuel Combustion in a Quiescent bomb with Natural Gas and Distillate
Injection
A Knowledge-Based Engineering System for Estimating Weight and
Manufacturing Cost for Conceptual Design of Composite Structures
A Study of a Fluidic Oscillator
A cybernetics Framework for Aggregate Inventory Management in the Royal
Australian Air Force
Intermittent Gas-Liquid Flow in Horizontal and Inclined Pipes
The Design of a Manually Propelled Wheelchair
Manually Propelled Wheelchair Design: A User Survey and a Proposed
Design
Design, Construction and Control of an Industrial Scale Biped Robot
A Decentralised Reactive Fuzzy Scheduling System (DRFSS) for Cellular
Manufacturing Systems
An Analysis Method for Ship Structural Optimization
The Aerodynamic Interaction of a Rotating Wheel and a Downforce
Producing Wing In Ground Effect
Effects of Thermal Residual Stresses on Static Strength and Fatigue Life of
Welded Carbon-fibre/Epoxy Composite Joints
Characterising, Predicting and Optimising Laser Cutting Quality
Finite Element Application of Fluid Flow in Axisymmetric Nozzles
A Numerical Study of Air Conditioning Usage in Office Buildings
Dynamic Modelling and Simulation of Gear Transmission Error for Gearbox
Vibration analysis
Multi-axial Weaving for Composite Applications
Towards Immunization of Complex Engineered Systems: Products,
Processes and Organizations
Dilute Gas Particle Turbulence Modelling
Optimising Life-Cycle Maintenance Cost of Complex Machinery using
Advanced Statistical Techniques and Simulation
Monitoring and Control of the CO2 Laser Cutting Process
An Experimental Study on High Speed Milling and a Predictive Force Model
Single- and Two-Phase, Steady and Unsteady Flows through Internal
Combustion Engine type Inlet Valves
Management for the Amelioration of Occupational Accidents
Simulation of Gear Faults and its Application to the Development of
Differential Diagnostic Technique
1994 M H Esteki
A Numerical Study of Natural Convection from Discrete Heat Sources in
Enclosures
1971 L E Farmer
An Experimental and Theoretical Study of the Effects of Work Hardening on
the Slip Line Field Solution for Plane Strain Extrusion
1983 W E Fisher
A Kinematic Study of the Human Hindfoot
1993 T F Foong
Selection of Manufacturing Technologies based on Business Strategies: A
Possibilistic Linear Regression Approach
2010 G L Forbes
Non-contact Gas Turbine Blade Vibration Monitoring using Internal
Pressure and Casing Response Measurements
2002 F Francis
Environmentally Conscious Quality Function Deployment- An Approach to
Product Planning under Environmental Considerations
1981 B Fungtamasan
Two Phase Flow at a Junction and its Intermittency
1994 F O Gaa
Numerical and Experimental Study of
1994 Y Gao
Extraction of Modal Parameters from Response Vibrations
2003 Y A Gharbia
Nano-Grinding for Fabrication of Microlenses on Optical Fibers Endfaces
1996 M Ghazanfari
Multi-Objective Hierarchical Production Planning Model Under Stochastic
Demand
1992 A Ginting
An Investigation into Muscular Fatigue for Constrained Work Postures
2005 K W Gock
Neural Network Prediction of Multi Variable Processes
1977 V K Goel
Stress analysis Associated with Total Hip Prosthesis
1997 G R Greenhalgh
Factors Influencing the Firm's Propensity to Develop a Unique
Manufacturing Strategy: An Empirical Investigation
2004 N K Groenhout
Design and Optimisation of Advanced Solar Water Heaters
1966 E J Hahn
Thermal Effects in Thrust Bearings
2001 S D Hall
An Investigation of the Turbulent Backward Facing Step Flow with the
Addition of a Charged Particle Phase and Electrostatic Forces
2007 D Hanafi
Automated Metal Spinning: Visual Tracking and Force Control
Methodologies
2008 J Hanafi
Modelling of Collection Strategics for End-of-Life Products using Coloured
Petri Net
2006 D Hanson
Operational Modal Analysis and Model Updating with a Cyclostationary
Input
2006 A Harman
Optimisation and Improvement of the Design of Scarf Repairs to Aircraft
1965 J Y Harrison
The Design of a Universal Ergometer and its Application for Determining
Human Power Output
1975 W F Hastings
A Theoretical and Experimental Investigation of the Machining Process
1975 B J Haydon
The Behaviour of Systems of Finite Queues
1989 J R He
Computer-Aided Dimensioning and Tolerancing for Process Operation
Planning
2002 Henmaidi
Integrated Multi-Stage Inventory Management for Perishable Materials in
Aerospace Industry
1973 R A Herringe
A Study of the Structure of Gas-Liquid Mixture Flows
1999 D Ho
Bearing Diagnostics and Self-Adaptive Noise Cancellation
1976 K Hoang
A Study of Gas-Liquid Flow in Return Bend
1968 Z J Holy
The Influence of Non-Uniform Surface Heat Transients on Temperature and
Thermal Stress Fields in Nuclear Reactor Components
1959 F H Hooke
The Effect of Mean Stress and of Preloading on Fatigue
1980 J D Hooper
Fully Developed Turbulent Flow through a Rod Cluster
1996 H Hosseini-Toudeshky Creep Life Assessments of Components Containing Stress Concentrations
under Uniform Loading and Temperatures
1992 B Hu
Phenomenological Modelling of the Combustion Processes in a Dual-Fuel
Diesel Engine using Combustion Bomb
1988 M Hu
Mobility Studies in Multi-Loop Spatial Linkages
2004 W Hu
On the Identification of the Configuration State in Rotor Bearing Foundation
System
1965 C T Huey
A Study of the Flow of Bubbly Mixtures in Horizontal Pipes
1970 O F Hughes
Wedge Penetration of a Free Surface
1992 S P Hur
Efficiency of Simulated Annealing Schedules for a Class of Optimization
Problems
1991 E S Hwang
A Finite Element Algorithm for Modelling Stable Crack Growth and for
Predicting Rapid Fracture in Post-Yield Fracture Mechanics
2006 S Ilic
Methodology of Evaluation of In-Service Loads Applied to the Shafts of
Automatic Transmissions
2001 J Iqbal
1999 M N Islam
1986 I S Jawahir
2006 S P Kang
1990 T S Kang
1999 S Kara
2002
2008
2010
1977
2006
J Keanton
D C Kellerman
P Khemavuk
H Khorasanizadeh
K M Kiang
1995 D Kibira
1994 C H Kim
2007 D S Kim
2009 S B Kiridena
1967
1996
1971
2003
A D Knott
L X Kong
E M Kopalinsky
B Kristyanto
2006 S S Kubsad
2008 B M Lavis
1984
1993
2009
2008
D Le
C H Lee
M C W Lee
S R Lee
2007 T H Lee
1976
2010
1984
1995
1968
2010
2002
T S Lee
Y A K Lejtman
E Leonardi
Y J Li
S G Liddle
S J Lien
A Liew
2009 S H Lim
1998 S Limnararat
1972 G C I Lin
2006
1969
2008
2005
X Liu
B J Lowe
G I Lucas
L Maguire
2009 L C Mak
2009 H M Man
2007 S Manmek
1984 M B Manyindo
Parametric Studies in Evaluating Machine Learning Paradigms
Functional Dimensioning in a Concurrent Engineering Environment
An Experimental and Theoretical Study of the Effects of Tool Restricted
Contact on Chip Breaking
Virtual Human-Machine Interfaces and Intelligent Navigation of
Wheelchairs
Layered Desiccant Dehumidifiers for Air Conditioning
A Simulation Approach to Project Planning in a Multi-Project concurrent
Engineering Environment
Anistropy and Natural Convection during Solidification and Melting
Strongly Orthotropic Continuum Mechanics
A model for warehouse performance measurement
A Numerical and Experimental Study of Rayleigh-Benard Convection
Natural Feature Extraction as a Front End for Simultaneous Localization and
Mapping
Interactive Reactive Scheduling of an Unbalanced Production Line by
Human Learning and Machine Induction
Modelling of Mixed Gas Generation Processes in a Fuel Injection System of
an S.I. Engine
Intelligent Scheduling and Control of Automated Guided Vehicle
Considering Machine Loading in a Flexible Manufacturing System: Using
Hopfield Networks and Simulation
Exploring Deeper Structures in Manufacturing Strategy Formation Processes:
A Qualitative Inquiry
The Efficiency of Series Production Lines
Simulation of Air/Fibre Conveyance within Confined Channels
A Study of Bubbly Two Phase Flow
Development of a Predictive Theory of Machining for Aluminium Alloys
using Materials' Variable Flow Stress Properties
Machining: An Investigation into Frictional Conditions and Tool Life for
Coated and Uncoated Tools
Spatially Reconfigurable and Non-Parametric Representation of Dynamic
Bayesian Beliefs
Numerical Methods for Finding Zeros and Extrema of Functions
Models of and Results for Randomly Driven Rattling Systems
Stochastic Analysis and Robust Design of Stiffened Composite Structures
Numerical Study of Buoyancy-Induced Air Flow/Heat Transfer in Doubleskin Facades
An Experimental and Theoretical Investigation for the Machining of
Hardened Alloy Steels
A Study of Power Station Cooling Ponds
Teamwork in Cellular Manufacturing
A Numerical Study of the Effects of Fluid Properties on Natural Convection
Diagnostics of Planetary Gear Bearings
A Study of Fluid Flow in Nozzles
Aerodynamic Performance Investigation of Wind Driven Rooftop Ventilator
A Study of a Rotor System with Ball Bearing Induced Non-Linearities and
the Development of Transfer Matrix Techniques Suitable for Analysing such
Systems
Calibration-free Image Sensor Modelling: Deterministic and Stochastic
An Investigation of the Feasibility of using an Expert System for Assessing
Surface Flatness with a Coordinate Measuring Machine
A Theoretical and Experimental Investigation into the Mechanics of
Orthogonal and Oblique Machining
Blind Source Separation Methods and their Mechanical Applications
Knee Mechanism Performance Amputee Details
Vibrational Characteristics of Structures with Uncertainty
Implementation of a Multi-Faceted Design Approach to Overcome Cooling
Problems in High Power Electronics
Non-Line-Of-Sight Localisation of a Sound Source
Implicit Coupled Constitutive Relations and an Energy-based Method for
Material Modelling
Economic Evaluation of Impacts of Industrial Products
An Experimental and Theoretical Investigation of Forces and Chip Geometry
1975
1988
2006
1998
R H Marshall
H Mawengkang
M I Mazhar
M Mbarawa
1971
1970
2010
1970
2001
2008
G B McMahon
D R Menzies
S Merz
R Metcalfe
H Miao
Z Mikulik
1999 L D Milanovic
1987 R J Mills
1971 B E Milton
2006 G E Milton
1996 M Molla-Hossein
1997 A Nachimuthu
2008 M S Nasif
2007 J R Neale
1997 C H Newton
2006
1980
1980
1979
1998
Q C Nguyen
T V Nguyen
V N Nguyen
L G Nhan
N J O'Shea
1970
1973
1967
2000
2002
R P Parlour
W L Passlow
J P Paul
N C Paul
N C K Pawsey
2008 R M Payne
1998 D A Peacock
2009 G M K Pearce
1981 T D Phu
2002 K Pianthong
2004 A J Pisasale
1972 A C Pittas
1973 V Z Poulson
2002 N Pumhirun
2008 J D Pye
2001 V Rajamohan
1974 J A Reizes
2005 D J Reynolds
1994 M A Rezvani-Baboli
1961 A W Roberts
as a Basis of Machinability Assessment when Machining Various Materials
An Integration Scheme of the Solution of Viscous Compressive Flows
Nonlinear Integer Programming
Lifetime Monitoring of Appliances for Reuse
Problems Related to the Combustion of Gaseous Fuels (Natural Gas) in
Diesel Engines
A Study of Algorithms for Industrial Scheduling Problems
Engineering Properties of Hay, with Particular Reference to the Hay Bale
Passive and Active Control of the Sound Radiated by a Submerged Vessel
Anistropy and the Bauschinger Effect in Cold-Worked Metals
Fundamental Studies of Combustion Phenomena in Dual Fuel Engines
Application of fracture mechanics to predict the growth of single and multilevel delaminations and disbonds in composite structures
(CTIMS) Computerised Thickness Inspection Management System and
(ITEM) Integrated Thinning Evaluation Modules
A Posteriori Error Estimates in Computational Fluid Mechanics
Shock Wave Motion and Focusing in Area Contractions
An Automated Micro-Grinding System for the Fabrication of Precision
Micro-Scale Profiles
Investigation of Various Maintenance Strategies in a Manufacturing
Environment
Computer vision Techniques for Finished Hide Inspection
Analysis and Modelling of Membrane Heat Exchanger in HVAC Energy
Recovery Systems
Experimental and Numerical Investigation of Noise Generation from the
Expansion of High Velocity HVAC Flows on Board Ocean Going Fast
Ferries
An Experimental and Numerical Study of Stratified Gas-Liquid Flow in
Horizontal Pipes
Switching Robust Adaptive Control in Nonlinear Mechanical Systems
Parallel Plant Heat Exchangers
On the Supersonic Blunt Body Problem by the Method of Integral Relations
A Numerical Study of Bubble Growth
Computational Prediction of Turbulent Flow Using a New Algebraic
Reynolds Stress Turbulence Model
The Mechanics of Granular Flow
Optimal Fuel Management in the Approach to an Equivalent Reactor Core
Forces at the Human Hip Joint
A Methodology for Assessing the Recyclability of Engineering Products
Development and Evaluation of Passive Variable-Pitch Vertical Axis Wind
Turbines
A Knowledge-Based Engineering Tool for Aiding in the Conceptual Design
of Composite Yachts
Decision-Based Hydrodynamic Design of Displacement Monohulls
High Strain-rate Behaviour of Bolted Joints in Carbon Fibre Composite
Structures
Water-Hammer in Bubbly Pipe Flows
Supersonic Liquid Diesel Fuel Jets: Generation, Shock Wave Characteristics,
Auto-ignition Feasibilities
Novel Aerodynamic Techniques applied to the Study of a Rotating Turbine
Ventilator
A Study of Diabatic Two-Phase Flow in Tubes
Biomechanics of the Leg
Analysis and Simulation of Diameters and Centre Distances Measurement
Using a Coordinate Measuring Machine
System Modelling of the Compact Linear Fresnel Reflector
Effective Micro-Hardness of Coated Surfaces in Relation to Contact Heat
Transfer
The Suspension of solids in Horizontally Flowing Fluids
A Thermal and Hydrodynamic Model for a Compact Linear Fresnel
Reflector-Type Solar Thermal Collector
Analysis of Non-Linear Systems with Application to Squeeze Film Dampers
An Investigation into the Performance of Grain Augers
1971 R Rosen
2000 G Rosengarten
1970 R N Roth
1972 G P Rothman
2008 F Rungrungruang
1999
1995
2000
2002
1984
2007
1973
1998
S A Safi
T M A A Samadhi
R M Sanchez
T Sangthean
V A Sardana
N Sawalhi
R B Seeger
G J Seil
1999 D J Sharman
2008 A Shen
1982 E W Shimmin
2002
2008
1975
1974
1982
1980
2001
R G Simpson
M B Skeen
G Smith
W K Soh
F I Soliman
C K Somasundaram
D Soodphakdee
2007 Y C Soo Too
2001 V J Soriano
1972 R M Spencer
2003 E Spong
2000 R Spyker
1970 M C Stevenson
1975 K J Stocks
1999 G J Storr
2004
1994
2008
2005
1990
M Sun
P J Sweeney
M Tadros
L H Tan
C G Tapia
1980 I Tas
1973 A O Tay
2002 N C Temperley
1976 N T Thang
1998 A D Thomas
An Investigation of the Electrostatic Collection of Particular Fission Products
and Their Contribution to a Scintillation Detector Signal
An Experimental and Numerical Study of Mantle Heat Exchangers for Solar
Water Heaters
Analysis of Flow Around a Tool Cutting Edge
Neutron Transport in Boiling Media
An Integrated Methodology for Assessing Physical and Technological Life
Products for Reuse
Effect of Aging on Flutter Characteristics of General Aviation Aircraft
Shared-CIM System Implementation and Management Structure
IDEF Modelling of Distributed Concurrent Engineering
Strategic Product Evaluation using a Stage-Gate Real Option Framework
Energetics of Muscular Activity
Diagnostics, Prognostics and Fault Simulation for Rolling Element Bearings
A Study of Muscular Action in Human Locomotion
Computational Fluid Dynamics Investigation and Optimisation of Marine
Waterjet Propulsion Unit Inlet Design
Measurement of, and Remedial Action for, Residual Stress in Gas Cylinder
Necks
Optimised Reduction of the Radiated Noise from the Casing of a Constant
Speed Gearbox
A Theoretical and Experimental Investigation of Deformation in Plane Strain
Rolling and Drawing Through Circular Dies
An Investigation into the Aerodynamic Effects of Coanda Wingtip Blowing
An Investigation of Energy Flow Through Coupled Plate Structures
Computer Solution to a Class of Scheduling Problems
Development of Vortex Sheets in Unsteady Flow and Applications
Optimization of Piping Networks
Direct Solution to Nozzle Flow using the Method of Lines
An Assessment of CFD Capabilities for the Design of Electronic Cooling
Devices
Innovative Heat Exchangers for Solar Water Heaters
A Simplified Assessment Approach for Environmentally Sound Product
Design
Classification of Tool Materials
A Numerical Simulation of Adaptive Electromagnetic Flow Control
The Application of Fracture Mechanics to the Fatigue Analysis of
Aluminium Ship Structures
A Theoretical and Experimental Investigation of the Influence of Strain Rate
in Machining
Mathematical Modelling of Reactor Strategies
Experimental and Numerical Investigations into the Spontaneous Triggering
of Jets in Vapour Explosions
Integrated Environmental Assessment of Industrial Products
Transmission Error Measurement and Analysis
Performance and Safety of Centrifugal Chillers using Hydrocarbons
Numerical Study of Phase Change with Marangoni Effects
The Use of Preference Criteria in Interactive Multiobjective Mathematical
Programming
A Theoretical and Experimental Investigation of Incompressible and
Compressible Manifold Pipe Flow
A Numerical Study of the Temperature Distribution Generated during
Orthogonal Machining
Optimisation of an Ultrasonic Flow Meter Based on Experimental and
Numerical Investigation of Flow and Ultrasound Propagation
A Study of Two-Phase Flow Through Venturis
Power Steering Valve Noise ACCESS RESTRICTED - NOT ON SHELF – NOT FOR
LOAN
1970 R W Thomas
2001 C C Tiangco
1999 M W Tosh
2003 A W L Turner
Finite Difference Computation of Heat Transfer by Natural Convection
Design of a Kalina Cycle System for Geothermal Power Generation
An Experimental and Numerical Investigation of Fibre Steering in Composite
Structures
A Theoretical and Experimental Investigation of Stress Distribution and
Remodelling of a Femur Implanted with a Femoral Prosthesis
2007 R Ujjin
1967 R W Upfold
1965 P van der Werf
1999 E J van Voorthuysen
1967 E P Villanueva
1973 M N Viswanathan
2007 T R Vittor
2010 J W Vogt
2001
1969
2003
2008
2009
2009
S M S Wahid
K J Waldron
L M Wallis
P Wangphanich
J R Ward
D J Watman
1984 A R Watson
2010 I Watson
2008 S S Webb
1976 B M Whan
1980 J F Whatham
2006 T R White
1976 J C Whitehouse
1968 R A Williams
1972 H M Williamson
1986 D J Wilson
1979 H Winarto
1981 L A Wood
2009 G Wu
2007 Q Yang
2008
1973
1992
2010
T Yaqub
B P Yeo
G H Yeoh
H Yokohama
1986 H T Young
1998 R K K Yuen
2002 S Zakrzewski
1997 H Zhang
2007 Q Zhang
2009 J Zhao
1997 L Zhao
1994 T F Y Zhu
Prediction of Bearing Failure in Pin-loaded Laminates
A Study of Unsteady Flow in a Reciprocating Compressor
An Investigation of the Thermodynamic Characteristics of Power Cycles for
Combustion Engines with Particular Reference To the Hybrid Engine Cycle
Process Capability Improvement using Large Volume Data Acquisition and
Path Analysis
Thermal Contact Conductance
Heat Transfer from Cylindrical Fuel Elements with Non-Symmetric Nuclear
Heating
Modular Decentralized Control and Design of a Reconfigurable Redundant
Manipulator
An Examination of Ground Effect Phenomena and the Development of
Ground Effect Induced Flow Separation on a Downforce Generating Wing
Gas Gap Conductance in Contact Heat Transfer
The Mobility of Linkages
A Comparison of Bi-Directional Disc Brake Rotor Passage Designs
Simulation Model for Quantifying and Reducing the Bullwhip Effect
Motion Planning of Bipedal Wall Climbing Robots
Analysis and Optimisation of Passive Flapping Wing Propulsion for Micro
Aerial Vehicles
The Theoretical Prediction of Torque and Thrust in Drilling
Spatial Verification and Validation of Datasets in Fluid Dynamics
Belief driven autonomous manipulator pose selection for less controlled
environments
Quantitative Management Models for a Sugar Cane District
The In-Phase Deformation of Flanged Pipe Bends
Simultaneous Diesel and Natural Gas Injection for Dual-Fuelling
Compression-Ignition Engines
Investigations into Guided Boiling
A Theoretical and Experimental Study of the Mechanics of the Drilling
Process
The Prediction of Plastic Anisotropy in Rolled Sheet Metals from
Crystallographic Texture
A Theory of Neutron Moisture Probes and Interpretation of Measurements in
Complex Soil and Water Systems
Turbulent Density Structures of Jets and Flames
Analysis of a Noise-Generating Random Repeated Impact Process
The Impact of Inter-company Network Technology on Correlations between
Supply Chain Drivers and Performance Measures
The Development of an Integrated Design System and its Embedded
Framework for Information Handling, Design Space Characterisation and
Problem Solving
Mobile Robot Motion, Perception and Environment Modelling
A Study of Optima Control Methods Applied to Manipulator Systems
Natural Convection in a Solidifying Liquid
Investigation of Nonlinear Contact Problem in Pneumatic Tyres Interacting
with Road Surface
Application of Predictive Machining Theory to More Complicated Processes
Including Single-Point Oblique Cutting tools with other than Single Straight
Cutting Edges and Milling and Experimental Verification
Pyrolisis and Combustion of Wood in a Cone Calorimeter
A Numerical and Experimental Investigation of High-Speed Liquid Jets:
Their Characteristics and Dynamics
Advanced Boiler Tube Life Assessments
A Study of High Performance Twist Drill Design and the Associated
Predictive Force Models
Stereo imaging and obstacle detection methods for vehicle guidance
Computational Study of Radiation and Mixed Convection in Enclosures
A Novel Finite Element Algorithm for Model Crack Growth and Predicting
Rapid Fracture in Post-Yield Fracture Mechanics