SUGGESTED MOUNTING FOR
AIFX SERIES
WARNING!
1. TO PREVENT RISK OF ELECTRICAL SHOCK DEACTIVATE/DISCONNECT POWER SUPPLY BEFORE INSTALLING OR LAMPING LUMINAIRE.
2. TO REDUCE RISK OF FIRE OR EXPLOSION, DO NOT INSTALL WHERE THE MARKED OPERATING TEMPERATURE EXCEEDS THE IGNITION TEMPERATURE OF THE HAZARDOUS ATMOSPHERES..
3. THIS LUMINAIRE SHOULD BE INSTALLED BY QUALIFIED ELECTRICIANS IN STRICT ACCORDANCE WITH THE NATIONAL ELECTRIC CODE AND ANY LOCAL REQUIREMENTS.
INSTALLATION:
1. Before installing, make sure that the circuit is deactivated.
2. This unit is furnished completely assembled. Before installing, check the luminaire label to insure correct voltage and frequency.
3. The ballast in this luminaire is designed to operate on grounded neutral systems only.
4. This luminaire may be rigid mounted in three different positions as required. Mounting parts supplied by others.
MAINTENANCE INFORMATION:
1. No routine maintenance is required to keep this luminaire functional. It should be checked periodically to ensure it is working properly, and to look for any external damage.
2. For best performance, keep light transmission parts of the luminaire clean. Any commercial glass cleaner can be used to
clean the glass tubes.
3. To relamp, disconnect the supply circuit. Remove the cover on either side of the luminaire. Loosen lampholder
screws. Twist and remove lampholder bracket. Withdraw old lamp. Insert new lamp in opposite lampholder. Replace
lampholder into position on the lamp. Twist slightly to place lampholder bracket under screw heads, and tighten screws.
Replace cover. (See Figure 1 )
4. In the event of glass tube breakage, it will be necessary to replace the damaged unit with a new factory sealed luminaire,
in order to maintain the integrity of the luminaire.
5. An optional aluminum wire guard can be installed on the luminaire to protect the glass tubes. Contact factory for
information.
6. When replacing ballast, it should be of Class-P thermally protected type, suitable for use in hazardous locations.
PARAMOUNTINDUSTRIES, INC.
Paramount Industries, Inc.
800-521-5405
Fax 800-852-7154
www.paramountlighting.com
REVISED 06/2012