Emergency.
Efficient.
ETL Listed.
TM
The CEL Series fixtures are low-profile emergency lights suitable for surface wall or ceiling mounting. Units resist denting, peeling,
scratching and corrosion. These emergency luminaires come standard rated for damp location installations.
CEL Series
Thermoplastic Industrial
Emergency Lighting
Product Overview
The CEL Series two-headed emergency units are a
low-profile solution to emergency lighting
requirement. This unit is an ideal solution for
exterior covered breezeways, warehouses, covered
corridors and high humidity regions. Not
recommended for outdoor use. White finish is
standard (black color optional). Configured for
standard operation 120/347VAC dual voltage input
with current limit protection.
Features
Damp location rated
Universal J-box mounting with quick-connect
adapters
Compact, low profile design
Unique, fully adjustable square lamp heads
Completely self-contained
Fully automatic operation
6-volt premium grade, lead-acid, maintenance-
free battery with 10 year expected life
Environmentally coated, solid state charger
Low voltage disconnect
120/347 VAC operation
Fully adjustable 5.4 watt (MM90) 4.6 watt
(MM90R), glare-free lighting heads
Injection-molded, V-0 flame retardant, high
impact, thermoplastic housing
Low-profile test switch and LED charge rate
indicator light
Regulated charge voltage
AC lockout
Overload/short circuit protection
Brown-out protection
ETL listed
CEL Series
Emergency Lighting
Product Specifications
The injection molded thermoplastic housing is corrosion
and flame resistant. The universal mounting plate allows
for effortless installation. The standard 5.4W incandescent
lamps can be positioned as needed. Damp location rating
is standard. 120/347 VAC dual voltage input with surge
protected, solid state circuitry.
EMERGENCY OPERATION Charging circuit is solid state
type with constant current charge and transfer design.
Circuit is brown-out protected and provides a minimum of
90 minutes of emergency run time and recharge time of 12
hours. Push to test switch and an LED AC indicator
provides simple means for manual test.
EXTERNAL SPECIFICATIONS The CEL Series is
constructed from high quality corrosion and flame
resistant thermoplastic. Emergency lighting heads are
molded from high impact thermoplastic in a matching
color and positioned on a ratcheted track for accurate
positioning. Lens material is a high-impact polystyrene.
Universal mounting bracket is easily snapped onto the
housing. External test switch and monitor LED are
standard.
INSTALLATION Suitable for surface wall or ceiling
mounting. Suitable for indoor / damp installation on
normally inflammable surfaces. 120/347VAC.
HOUSING The CEL Series utilizes a corrosion and flame
resistant injection molded thermoplastic housing and
mounting bracket. Lightweight and durable, the CEL
Series is ideal for use in areas where materials such as
steel and aluminum may deteriorate. The bracket
connection allows installation to a standard wall mounted
junction box.
EMERGENCY SPECIFICATIONS The CEL Series
emergency luminaire is configured for standard operation
120/347VAC dual voltage input with current limit
protection. Current charge regulator is standard. Minimum
90 minutes emergency duration. 24 hour charge time.
BATTERY The CEL is supplied with a maintenance free,
sealed valve regulated lead acid battery for emergency
operation that provides a minimum emergency duration of
90 minutes (for the listed rating). The CEL-1 model comes
standard with a 6V 4Ah battery. Recharge time of the
battery is twenty four (24) hours. The maximum working
temperature is 50 C
LAMPHEAD FEATURES The CEL Series is normally
supplied with two (2) front mounted square heads with
5.4W wedge base incandescent lamps. Lamp heads are
mounted within a ratcheted track that allows correct and
accurate beam positioning. Lamp heads are constructed
of high impact thermoplastic in a color matching the finish
of the housing (white is standard). Lens material is a highimpact polystyrene.
DAMP LOCATION RATED The CEL Series emergency
luminaires come standard rated for damp location
installations.
UNIVERSAL MOUNTING The CEL Series emergency
lighting unit uses a universal mounting bracket that snaps
into the housing. Easy field wiring and durability make this
unit a favorite among contractors.
Limited Warranty
All Concealite equipment is guaranteed against
defects in materials (excluding lamps) and
workmanship by the manufacturer for a period of five
years from date of shipment under normal operations
and proper use. Correction of all defects shall be by
replacement or repair (at our discretion) and shall
FIXTURE
SCHEDULE
FIXTURE TYPE:
PROJECT NAME/REF:
APPROVAL:
LAMP TYPE:
PROJECT LOCATION:
CEL Series
HORIZONTAL
25
20
15
10
5
0
VERTICAL
25
20
15
10
5
0
Ordering Information
EXAMPLE SPEC: CEL-1-W
SERIES
CEL-1 (Standard)
CEL-1-RC (Remote Capable)
COLOR
W (White)
B (Black)
OPTIONS (USA ONLY)
G2 (Self Testing)
SELF-TESTING/ SELF-DIAGNOSTIC
OPERATION (Option: G2)
The circuit continuously monitors the
operating condition of the AC power,
battery supply voltage, emergency lamp
continuity and charging circuit. If a failure
is detected, visual status will occur
immediately via the multi-colored LEDs.
LED indicator(s) will illuminate until fault
has been corrected. The G2 also
monitors the transfer circuit as well as
performing automatic code compliant
testing. The self-test will operate the
equipment in emergency mode five
minutes every 28 days. Also, a 90 minute
full-function test is performed every six
months.
870 Brock Road, South
Pickering, ON, L1W 1Z8
Ph: (905) 839-1138
Fax: (905) 839-3251
www.hubbellonline.com
Note: These specifications are subject to change
TM
v.031710–TESEL1