GREGG DISTRIBUTORS LTD. NEW PRODUCT SUPPLEMENT CATALOGUE 4 2015 In this issue: 32 NORTH STABILicers™ — Traction Gear.............................................SP04-76 ACCUFORM SIGNS® Safety Tags............................................................SP04-77 BAFFIN Colorado Boot..............................................................................SP04-79 C.H. HANSON Marking Stamps................................................................SP04-64 CHROME TAPE MEASURE......................................................................SP04-64 DANGEROUS GOODS Placards..............................................................SP04-77 EATON AEROQUIP High Pressure Hose..................................................SP04-79 ERGODYNE® Squids™ Hard Hat Lanyard...............................................SP04-77 FASTER® Flat Face Couplings..................................................................SP04-79 GANDER BRAND TIG (Tungsten Inert Gas) Gloves................................SP04-76 GPI® Accessories....................................................................SP04-71 to SP04-72 GPI® DEF Pumps & Meter.........................................................................SP04-69 GPI® Fuel Transfer Pumps.....................................................SP04-66 to SP04-67 GPI® Hand Pumps..................................................................SP04-69 to SP04-70 GPI® Meters............................................................................SP04-70 to SP04-71 GPI® Speciality Pumps..............................................................................SP04-68 HOBART® Aluminium Electrodes...........................................SP04-61 to SP04-62 HOBART® Low Alloy Electrodes................................................................SP04-60 HOBART® Mild Steel Electrodes............................................SP04-58 to SP04-60 HOBART® Mild Steel Solid Wires..............................................................SP04-61 HOBART® Tubular Wires........................................................SP04-62 to SP04-63 JAVELIN INDUSTRIAL Fab Tools.............................................................SP04-65 KIMBERLY-CLARK Paper/Wiping Products..............................................SP04-76 KUNY’S Tool Pouches, Holders, & Carriers..............................................SP04-65 KRYLON Paint Products...........................................................................SP04-76 MECHANIX WEAR® Professional Gloves.................................................SP04-76 MILLER® Accessories.............................................SP04-26, SP04-50 to SP04-54 MILLER® Drive Rolls, Tongs, & Tips..........................................................SP04-55 MILLER® Engine-Driven Welders...........................................SP04-21 to SP04-24 MILLER® Fume Extraction.........................................................................SP04-38 MILLER® Gas Equipment.......................................................SP04-27 to SP04-37 MILLER® GTAW/TIG Welders................................................SP04-15 to SP04-19 MILLER® MIG Spool Guns.....................................................SP04-48 to SP04-49 MILLER® MIG Welding Guns..................................................SP04-45 to SP04-47 MILLER® MIG/GMAW Welders...............................................SP04-02 to SP04-06 MILLER® Multiprocess Welders..............................................SP04-06 to SP04-07 MILLER® Plasma Cutter Welders..............................................................SP04-25 MILLER® SMAW/Stick Welders..............................................SP04-13 to SP04-14 MILLER® SuitCase® Wire Feeders............................................................SP04-10 MILLER® Weldcraft™ TIG Torches............................................................SP04-20 MILLER® Weldcraft™ Tungsten................................................................SP04-19 MILLER® Welding Electrical Accessories...............................SP04-56 to SP04-57 MILLER® Welding Protection..................................................SP04-39 to SP04-43 MILLER® Wire Feeders.......................................................... SP04-11 to SP04-12 MILLER® Workstations..............................................................................SP04-44 MILLER® XMT® Multiprocess Welders....................................SP04-08 to SP04-09 MILTON Inflator Gauges............................................................................SP04-65 PRONGHORN Booster Cables.................................................................SP04-78 PRONGHORN Booster Cable Clamps......................................................SP04-78 PRONGHORN Quick Connectors..........................................SP04-78 to SP04-79 RIDGID® Red Wet/Dry Vacuum Cleaners...............................SP04-73 to SP04-75 TAPE Industrial Tape.................................................................................SP04-65 TARGET TECH Incandescent Beacons....................................................SP04-77 MILLER® Welder Features Output Power Light industrial products are suitable for the home hobbyist or occasional user. They are designed to be easy to operate, are affordably priced and typically have a 20% duty cycle and rated output of 230 amps or lower. Industrial products are suitable for applications that do not require high-volume production. They typically have a 40 to 60% duty cycle and/or rated output of 300 amps or lower. Industrial products are an appropriate choice for professional welders. Heavy industrial products are suited to high-volume production and/or welding of thicker materials. They typically have a duty cycle of 60 to 100% and a rated output of at least 300 amps. Heavy industrial products are designed with the arc characteristics and product features professional welders demand for code-quality work. Symbol Meanings MLR/2777/2784 Power Icons Unit requires singlephase input power Unit supplies alternating current and direct current weld output Unit requires threephase input power Unit supplies constantcurrent weld output Unit supplies alternating current weld output Unit supplies constantvoltage weld output Unit supplies direct current weld output Unit supplies constantcurrent and constantvoltage weld output Improves productivity and maneuverability by eliminating cord tangles. Reduces clean up time and work area cord clutter. Improves safety by eliminating control cord and reducing potential trip hazard. Improves reliability by eliminating control cord failure. The Auto-Line circuit boosts primary power to a higher, constant voltage. Even if incoming voltage varies widely, the circuit ensures a rock-steady welding or cutting arc. ArcReach provides remote control at the wire feeder without needing a control cable. Insight welding information management solutions help your operation be more competitive and profitable by delivering accurate, decision-ready information about your welding processes. MIG/GMAW Welders Millermatic® 141 & 190 •Auto-Set™ automatically provides the right settings to weld mild steel while infinite voltage control allows the flexibility to manually set your own parameters: Set the wire diameter (.024 or .030” diameter solid steel wire), a blue light shows Auto-Set is activated; Dial in the thickness of what you’re welding; Start welding with the exact parameters you need! •Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup with included 10 ft. (3 m) MIG gun or optional 15 ft. (4.6 m) MIG gun •Quick Select™ drive roll makes setup quicker by offering three grooves — two for different size solid wire and a third for flux-cored wire •Auto Spool Gun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch •Smooth-Start™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category. •Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools •Uses 4” or 8” (102 or 203 mm) spools Millermatic 190 Model Additional Features: •Miller inverter technology combines best-in-class arc characteristics with the portability of a 35-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds. •Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine Processes: •MIG (GMAW) • Flux-Cored (FCAW) Comes Complete with: 10-ft. (3 m) M-100 MIG gun and cable assembly (#248282), 10-ft. (3 m) work cable with clamp, 6.5-ft. (2 m) power cord with plug, Quick Select™ drive roll for .024” (0.6 mm) or .030/.035” (0.8/0.9 mm) solid wire, and .030/.035” (0.8/0.9 mm) flux-cored wire, Flow gauge regulator and gas hose for argon or AR/CO2 mix, two .030" contact tips, Hobart® spool of .030” solid wire, hook-and-loop cord wraps, and material thickness gauge (#229895) Part No. 907612, Millermatic 141. Part No. 951601, Millermatic 141 with running gear/cylinder rack. Mild Steel Welding Capability Aluminum Welding Capability Part No. 907613, Millermatic 190. Model 141: Min - 24 ga. (0.8 mm) Model 141: Min - 18 ga. (1.2 mm) Part No. 951602, Millermatic 190 with running gear/cylinder rack. Max - 3/16” (4.8 mm) Max - 14 ga. (1.9 mm) Part No. 300371, Spoolmate™ 100. Model 190: Min - 24 ga. (0.8 mm) Model 190: Min - 18 ga. (1.2 mm) Part No. 301239, Running Gear/Cylinder Rack. Max - 5/16” (7.9 mm) Max - 1/4” (6.4 mm) Part No. 301262, Protective Cover. Part No. 220179, .023/.024 (0.6 mm) to .035 (0.9 mm) V-groove Drive Roll. Auto-Set™ Part No. 261157, .023/.024 (0.6 mm) to .035 (0.9 mm) V-groove and .030 (0.8 mm) to .035 (0.9 mm) V-knurl Drive Roll. Amps Input at Rated Output, 60 Hz Input Amperage Machine Only Model No. Rated Output Wire Feed Speed Wire Type and Diameter Capacity Power Range Dimensions 120 V 240 V KVA KW Millermatic 141 120 V 30–140 90 A at 18.5 VDC, 20 — 3.0 2.45 15– 360 IPM Solid Steel .023 –.030” (0.6 – 0.8 mm) 20% duty cycle (0.4 – 9.1 m/min.) Stainless .023 –.030” (0.6 – 0.8 mm) 12.5”H x 11.25”W Flux-Cored .030 –.035” (0.8 –0.9 mm) x 20.5”D Millermatic 190 240 V 30–190 140 A at 21 VDC, — 21 5.0 3.8 60– 600 IPM Solid Steel .023 –.035” (0.6 – 0.9 mm) (318 mm x 286 40% duty cycle (1.5 – 15.2 m/min.) Stainless .023 –.035” (0.6 – 0.9 mm) mm x 521 mm) Flux-Cored .030 –.035” (0.8 –0.9 mm) SP04-2 GREGG DISTRIBUTORS LTD. Machine Only Net Weight 51 lb. (23.1 kg) 35 lb. (15.9 kg) MILLER® MLR/2777/2784 MIG/GMAW Welders Millermatic® 211 Auto-Set™ with MVP™ •Auto-Set makes setup quick and easy. On the Millermatic 211, it works with .030 and .035” wire. •Infinite voltage control - When used in manual mode provides broader operating range with finer control than a tap machine. •Welds thickest material in its class - up to 3/8” (9.5 mm)! •Multi-voltage plug (MVP™) allows connection to 115 or 230-volt receptacles without tools •Heavy-duty aluminum drive system is designed to provide superior feeding and durability. The toolless, quick-change reversible drive rolls and easy-to-set scaled tension knob make it the easiest to use in the industry. •Thermal overload protection - Designed to protect your investment, every Millermatic is now equipped with built-in thermal overload protection. •Smooth-Start™ technology provides smooth, spatter-free starts — no pop gun starts and no spatter to clean up •”Tip saver” shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. •Uses 4 or 8” (102 or 203 mm) spools Mild Steel Welding Capability Aluminum Welding Capability Processes: Model 211: Min - 24 ga. (0.8 mm) Model 211: Min - 18 ga. (1.2 mm) •MIG (GMAW) • Flux-Cored (FCAW) Max - 3/8” (9.5 mm) Max - 3/8” (9.5 mm) Comes Complete with: 10 ft. (3 m) M-100 MIG gun and cable assembly (#248282), 10 ft. (3 m) work cable with clamp, 6 ft. (1.8 m) power cord with MVP plugs for 115 V and 230 V, Factory-installed gas solenoid valve, Dual groove quick-change drive rolls for .024” (0.6 mm) or .030/.035” (0.8/0.9 mm) wire, Flow gauge regulator and gas hose for argon or AR/CO2 mix, extra contact tips, Hobart® spool of solid wire, information/settings chart, and material thickness gauge (#229895) Part No. 907422, Millermatic 211. Part No. 301239, Running Gear/Cylinder Rack. Part No. 951375, Millermatic 211 with standard running gear/cylinder rack. Part No. 195149, Protective Cover. Part No. 300371, Spoolmate™ 100. Part No. 202926, V-Knurled Drive Roll. Model No. Input Amperage Power Range 120 VAC 30–140 Millermatic® 211 230 VAC 30–210 Amps Input at Rated Output, 60 Hz Machine Machine allows Only connection to Only Wire Feed Speed Wire Type and Diameter Capacity MVP Net Weight 120 V 230 V KVA KW 120Dimensions V and 230 V receptacles. 15¾”H x 10.63”W 90 A at 20 V, 20 — 2.9 2.5 Solid Steel .023 –.035” (0.6 – 0.9 mm) 60– 540 IPM x 17½”D 20% duty cycle 74 lb. (33.6 kg) Stainless .023 –.035” (0.6 – 0.9 mm) (1.5 – 13.7 m/min.) (400 mm x 270 150 A at 23.5 V, — 24.3 5.5 4.8 Flux-Cored .030 –.045” (0.8 –1.2 mm) mm x 445 mm) 30% duty cycle Rated Output Millermatic® 212 Auto-Set™ •Auto-Set makes setup quick and easy. On the Millermatic 212, it works with .030 and .035”. wire •Infinite voltage control - When used in manual mode provides broader operating range with finer control than a tap machine. •Gun-On-Demand.™ Simply pull the trigger for either gun and you’re ready to weld. No wasted time installing modules and using gas valve kits. •Heavy-duty aluminum, two-drive-roll system •Fan-On-Demand™ cooling system only operates when needed reducing power consumption and keeping internal components cleaner •Aluminum MIG welding with optional Spoolmate™ 200 spool gun. Wire feed speed control on the gun saves time by reducing trips back to the machine. Also compatible with industrial Spoolmatic® spool guns. Processes: • MIG (GMAW) • Flux-Cored (FCAW) Comes Complete with: 15 ft. (4.5 m), 250-amp M-25 gun, 10 ft. (3 m) work cable with clamp, 7 ft. (2.1 m) power cord and plug, Flow gauge regulator and gas hose for argon or AR/CO2 mix, Factory-installed lowered running gear/cylinder rack, .030/.035” reversible dual-groove drive rolls, and extra contact tips and material thickness gauge Part No. 907405, Millermatic 212. Mild Steel Welding Capability Aluminum Welding Capability Part No. 951177, Millermatic 212 with Spoolmate 200, regulator, gas hose, Model 212: Min - 22 ga. (0.9 mm) Model 212: Min - 14 ga. (1.9 mm) and dual cylinder rack. Max - 3/8” (9.5 mm) Max - 3/8” (9.5 mm) Part No. 300497, Spoolmate™ 200. Part No. 300337, Dual EZ-Change™ Low Cylinder Rack. Part No. 300335, Elevated Gun and Cable Rack. Part No. 195142, Protective Cover. Part No. 300517, Full KVA Adapter Cord. Amps Input at Rated Output, 60 Hz Input Amperage Rated Output Wire Feed Speed Range Power 200 V 230 V KVA KW 50–700 IPM Millermatic® 212 200(208) 30–210 160 A at 24.5 VDC, 31 28 6.2 5.2 (1.3 –17.8 m/min.) /230 V 60% duty cycle Model No. Wire Type and Diameter Capacity Solid Steel .023 –.035” (0.6 – 0.9 mm) Stainless .023 –.035” (0.6 – 0.9 mm) Flux-Cored .030 –.045” (0.8 –1.2 mm) Machine Only Machine Only Dimensions Net Weight 30”H x 19”W x 40”D 183 lb. (83 kg) (762 mm x 483 mm x 1,016 mm) Millermatic® 252 •Infinite voltage control with self-calibrating digital meters that permit presetting of voltage and wire feed speed. Ensures precise parameters and accuracy. •Auto-Gun Detect™ automatically adjusts voltage, wire speed and timers for faster switching between MIG, push-pull and spool guns. Integrated digital timers come complete with presettable preflow/postflow, burnback, spot and delay (stitch) timers. Independent timers for MIG and spool gun. •Heavy-duty aluminum, two-drive-roll system •Fan-On-Demand™ cooling system only operates when needed reducing power consumption and keeping internal components cleaner •Superior aluminum MIG welding with direct connection of optional XR™ push-pull guns, Spoolmatic®/Spoolmatic Pro and Spoolmate™ 200 spool guns. No extra module to buy or install. Mild Steel Welding Capability Aluminum Welding Capability Processes: Model 252: Min - 22 ga. (0.9 mm) Model 252: Min - 14 ga. (1.9 mm) •MIG (GMAW) • Flux-Cored (FCAW) Max - 1/2” (13 mm) Max - 3/8” (9.5 mm) Comes Complete with: 15 ft. (4.5 m), 250-amp M-25 gun, 10 ft. (3 m) work cable with clamp, 10 ft. (3 m) industrial power cord (and plug on 200/230 V model), Factory-installed gas solenoid, Flow gauge regulator and gas hose for argon or AR/CO2 mix, Factory-installed lowered running gear/cylinder rack, .030/.035” reversible dual-groove drive rolls, and Extra contact tips Part No. 907321, Millermatic 252. 200(208)/230 V. Part No. 951066, Millermatic 252. 200(208)/230 V. Comes with With Spoolmatic 30A, regulator, gas hose and dual cylinder rack. Part No. 907322, Millermatic 252. 230/460/575 V. Part No. 951065, Millermatic 252. 230/460/575 V. Comes with With Spoolmatic 30A, regulator, gas hose and dual cylinder rack. Part No. 300337, Dual EZ-Change™ Low Cylinder Rack. Part No. 300335, Elevated Gun and Cable Rack. Part No. 195142, Protective Cover. Amps Input at Rated Output, 60 Hz Input Amperage Wire Type and Diameter Capacity Rated Output Wire Feed Speed Model No. Range Power 200 V 230 V 460 V 575 V KVA KW 200(208) 200 A at 28 VDC, 48 42 — — 9.5 7.5 Solid Steel .023 –.045” (0.6 –1.2 mm) 50–700 IPM Millermatic® 252 /230 V 60% duty cycle Stainless .023 –.045” (0.6 – 1.2 mm) 30–300 (1.3 –17.8 m/min.) 230/460/ 250 A at 28 VDC, — 46 23 18 9.5 7.5 Flux-Cored .030 –.045” (0.8 –1.2 mm) 575 V 40% duty cycle (at 60% duty cycle) Machine Only Machine Only Dimensions Net Weight 30”H x 19”W x 40”D 205 lb. (94 kg) (762 mm x 483 mm x 1,016 mm) www.greggdistributors.ca SP04-3 MILLER® MLR/2777/2784 MIG/GMAW Welders Millermatic® 350P •Built-in Pulsed MIG programs. All programmed information is restored after each power up — aluminum/steel/stainless steel/metal-cored. •Infinite voltage control with self-calibrating digital meters that permit presetting of voltage and wire feed speed. Ensures precise parameters and accuracy. •Auto-Gun Detect™ automatically adjusts voltage, wire speed and timers for faster switching between MIG, push-pull and spool guns •Integrated digital timers come complete with presettable preflow/postflow and spot timers. Independent timers for MIG and push-pull guns •Heavy-duty aluminum, four-drive-roll system •Fan-On-Demand™ cooling system only operates when needed reducing power consumption and keeping internal components cleaner Mild Steel Welding Capability Aluminum Welding Capability Processes: Model 350P: Min - 24 ga. (0.8 mm) Model 350P: Min - 18 ga. (1.2 mm) •MIG (GMAW) • Flux-Cored (FCAW) • Pulsed MIG (GMAW-P) Max - 1/2” (13 mm) Max - 1/2 in. (13 mm) Comes Complete with: 15 ft. (4.5 m) Bernard™ Q300 MIG gun with Centerfire™ consumables, 10 ft. (3 m) work cable with clamp, 10 ft. (3 m) industrial power cord (without plug) for single- or three-phase, Factory-installed gas solenoid, Flow gauge regulator and gas hose for argon or AR/CO2 mix, Factoryinstalled, low-mounted running gear/cylinder rack, .035/.045” reversible V-groove drive rolls (order U-groove drive rolls for aluminum welding), and Extra contact tips Part No. 907300, Millermatic 350P. 200/230/460 V. Part No. 195299, Dual Cylinder Rack. Part No. 195142, Protective Cover. Amps Input at Rated Output, 60 Hz Input Amperage Machine Only Machine Only Model No. Rated Output Wire Feed Speed Wire Type and Diameter Capacity Range Power Dimensions Net Weight 200 V 230 V 460 V KVA KW MIG Gun Solid Steel .023 –.045” (0.6 –1.2 mm) 34”H x 19”W x Three- 34 30 15 11.6 11.5 50–700 IPM Stainless .030 –.045” (0.8 –1.2 mm) 41”D phase300 A at 32 VDC, 25–400 181 lb. (82 kg) Millermatic® 60% duty cycle (863 mm x 483 Single- 69 61 30 13.1 11.2 (1.3–17.8 m/min.) Aluminum .035 –.047” (0.9 –1.2 mm) 350P Optional Spool Metal-Cored .035 –.052” (0.9 –1.3 mm) mm x 1,041 mm) phase Gun/Push-Pull Gun Flux-Cored .030 –.052” (0.8 –1.3 mm) 50–800 IPM (1.3–20 m/min.) CP-302 •Cost-effective, simple MIG power source designed for manufacturing •Large analog meters are easy to read and display preset and actual voltage and amperage •14-pin receptacle provides a quick, direct connection to Miller® wire feeders •115-VAC power for tools and coolant systems Processes: •MIG (GMAW) •Flux-Cored (FCAW) •Air Carbon Arc Gouging (CAC-A) (302 Model) (452/652 Models) •Industry standard for industrial MIG welding. Designed for manufacturing operations, with 100% duty cycle for extended arc-on time. •Line voltage compensation ensures consistent weld performance even when primary power varies •Fan-On-Demand™ cooling system operates only when needed. Reduces contaminants drawn into the machine and excess noise in work areas. •Digital meters are easy to read and display preset and actual voltage and amperage •14-pin receptacle provides a quick, direct connection to Miller® wire feeders. Capable of remote voltage control. •115-VAC power for tools and coolant systems •Thermal overload protection light indicates power shutdown. Helps prevent machine damage if the duty cycle is exceeded or airflow is blocked. Processes: •MIG (GMAW) •Flux-Cored (FCAW) •Air Carbon Arc Gouging (CAC-A); (Deltaweld 452: 1/4” carbons) (Deltaweld 652: 3/8” carbons) Deltaweld® SERIES Stationary package includes: Power source • 22A (CP-302) or S-74D (Deltaweld) feeder with .035/.045" drive rolls, Bernard™ Q300 (CP-302) or Q400 (Deltaweld) MIG gun, Industrial MIG 4/0 kit consisting of flowmeter regulator with 10 ft. (3 m) gas hose, 10 ft. (3 m) 4/0 feeder weld cable with lugs, and 15 ft. (4.6 m) work cable with 600-amp C-clamp. MIGRunner™ package includes: Items shown above plus Factory-installed standard running gear and standard cylinder rack Power Source Only Stationary Package MIGRunner Package Part No. Part No. Part No. CP-302 200/230/460 V 903786951231951230 Deltaweld 302 200-208/230/460 V 903376951235951234 230/460/575 V 903392 — 951300 Deltaweld 452 200-208/230/460 V 903377951237951236 230/460/575 V 903394951301951302 Deltaweld 652 230/460/575 V 903396951239951238 Model CP-302 Deltaweld Input Power Part No. 042886, Standard Running Gear. Part No. 042887, Standard Cylinder Rack. Part No. 300390, Industrial MIG 4/0 Kit (with lug connectors). Part No. 247831025, 25 ft. Extension Cables (7.6 m) Part No. 247831050, 50 ft. Extension Cables (15 m) Part No. 247831080, 80 ft. Extension Cables (24.4 m) Model CP-302 Deltaweld 302 Deltaweld 452 Deltaweld 652 Voltage Range 14–44 10–32 10–38 10–44 Rated Output 300 A at 32 VDC, 100% duty cycle 300 A at 32 VDC, 100% duty cycle 450 A at 38 VDC, 100% duty cycle 650 A at 44 VDC, 100% duty cycle Amps Input at Rated Output, 60 Hz 200 V 230 V 460 V 575 V KVA KW 38 33 16.5 — 13.1 12.3 48 42 21 17 16.9 12.9 72 63 32 25 25.1 21.1 — 96 48 38 38.2 34.2 Open-Circuit Dimensions Voltage (Includes lift eye and strain relief) 30”H x 23”W 14– 44 VDC (762 mm x 585 mm) 42 VDC max. 302: 30.5”D (775 mm) 48 VDC max. 452/652: 38”D (966 mm) 54 VDC max. Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. SP04-4 GREGG DISTRIBUTORS LTD. Net Weight 332 lb. (151 kg) 323 lb. (147 kg) 384 lb. (174 kg) 472 lb. (214 kg) MILLER® MLR/2777/2784 MIG/GMAW Welders Millermatic® 350P ALUMINUM •True torque feed motor push-pull design provides continuous push force to the wire while the gun motor controls the speed at the gun. The motors work together to provide accurate and positive wire feed speed without wire shaving or deformation. •Electronic wire spool brake allows wire spool to free spool while welding resulting in smooth wire delivery •Built-in aluminum Pulsed MIG programs for simplicity and improved puddle control. Pulsed welding virtually eliminates burnthrough and warping issues on thinner materials. •Synergic MIG and Synergic Pulsed MIG provide communication between power source, feeder and gun. As wire speed increases/decreases, the pulse or MIG parameters also increase/decrease to match the right amount of power needed. •Trigger schedule select allows operator to change between two sets of weld parameters •Trigger hold reduces operator fatigue on extended welds •Standard jog and purge Processes: • Aluminum MIG (GMAW) • Aluminum Pulsed MIG (GMAW-P) Comes Complete with: 10 ft. (3 m) work cable with clamp, 10 ft. (3 m) industrial power cord (without plug) for single- or three-phase, Factory-installed gas solenoid, Flow gauge regulator and gas hose for argon, Factory-installed, low-mounted running gear/cylinder rack, and .035- and .047” (0.9 and 1.2 mm) U-groove drive rolls for aluminum welding Part No. 907474, Millermatic 350P Aluminum standard unit. Part No. 951451, Millermatic 350P Aluminum with 15-ft. XR-Aluma-Pro™ air-cooled gun. Part No. 951452, Millermatic 350P Aluminum with 25-ft. XR-Aluma-Pro™ air-cooled gun. Part No. 951453, Millermatic 350P Aluminum with 25-ft. XR™-Pistol Pro air-cooled gun. Part No. 951454, Millermatic 350P Aluminum with 25-ft. XR-Aluma-Pro™ Lite air-cooled gun Part No. 195299, Dual Cylinder Rack. Part No. 195142, Protective Cover. Amps Input at Rated Output, 60 Hz Input Amperage Model No. Rated Output Wire Feed Speed Wire Type and Diameter Capacity Range Power 200 V 230 V 460 V KVA KW Optional Spool Aluminum .035 –.047” (0.9 –1.2 mm) Three- 34 30 15 11.6 11.5 Millermatic® 300 A at 32 VDC, Gun/Push-Pull Gun phase 25–400 60% duty cycle 50–800 IPM 350P Aluminum Single- 69 61 30 13.1 11.2 (1.3–20 m/min.) phase Machine Only Machine Only Dimensions Net Weight 34”H x 19”W x 41”D 181 lb. (82 kg) (863 mm x 483 mm x 1,041 mm) Invision™ MPa PLUS SYSTEM •MIG and synergic Pulsed MIG system with optimized weld programs for both steel and aluminum •Built-in MIG and Pulsed MIG programs automatically set the optimal parameters for a wide variety of wires making it easy to set up and use •Synergic Pulsed MIG. As wire speed increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments •Profile Pulse™ provides TIG appearance with MIG simplicity and productivity. Achieve ”stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance. •Invision 352 model allows for any input voltage hookup (208–575 V) with no manual linking. 450 model is 230/460 V manual link or 575 V, three-phase only. •Easy to set up. Select wire diameter, wire type and gas being used, set your wire speed and strike an arc. •Wind Tunnel Technology.™ Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability. •Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through machine Processes: •MIG (GMAW) • Flux-Cored (FCAW) • Pulsed MIG (GMAW-P) • Air Carbon Arc Gouging (CAC-A); (Invision 352: 1/4” carbons) (Invision 450: 5/16” carbons) Part No. 907431, Invision 352 MPa Power Source Only. 208–575 V. Part No. 907431001, Invision 352 MPa Power Source Only. 208–575 V with auxiliary power. Part No. 907485, Invision 450 MPa Power Source Only. 230/460 V with auxiliary power. Part No. 907486, Invision 450 MPa Power Source Only. 575 V with auxiliary power. Part No. 195445, MIGRunner™ Cart (single feeders only). Part No. 300408, Running Gear Cylinder Rack. Part No. 043007, Coolmate™ 3. Part No. 300405, Industrial MIG 4/0 Kits with Dinse connectors (352 MPa only). Part No. 300390, Industrial MIG 4/0 Kits with lug connectors (450 MPa only). Part No. 247831025, 25 ft. (7.6 m) Extension Cables. Part No. 247831050, 50 ft. (15 m) Extension Cables. Part No. 247831080, 80 ft. (24.4 m) Extension Cables. Package Includes Model Invision 352 MPa Invision 450 MPa Package Part No. 951287 951501 951411 951500 951499 951457 70 Series MPA Plus Feeder with Bernard™ Q400 XR-Aluma-Pro™ Plus Push-Only MIG Gun and .035/.045 Drive Rolls Push-Pull MIG Gun S-74 (single-wire feeder with one gun) 25-ft. air-cooled D-74 (dual-wire feeder with two guns) 25-ft. air-cooled S-74 (single-wire feeder with one gun) — D-74 (dual-wire feeder with two guns) — S-74 (single-wire feeder with one gun) — D-74 (dual-wire feeder with two guns) — Amps Input at Rated Output, 60 Hz Input Amp/Volt Rated Output KVA Range Power 208 V 230 V 400 V 460 V 575 V Three- 5 – 425 A 350 A at 34 VDC, 40.4 36.1 20.6 17.8 14.1 14.2 Invision 352 phase 10 – 38 V 60% duty cycle MPa Single- 5 – 425 A 300 A at 32 VDC, 60.8 54.6 29.7 24.5 19.9 11.7 phase 10 – 38 V 60% duty cycle Invision 450 Three- 15–600 A 450 A at 36.5 VDC, — 49.4 — 27.2 23.6 21.6 MPa phase 10 – 38 V 100% duty cycle (23.5 on 575 V) Model No. KW Industrial MIG 4/0 Kit 13.6 11.2 18.3 75 VDC 90 VDC Invision 352 MPa Invision 450 MPa Cart With Dinse connectors With Dinse connectors With Dinse connectors With Dinse connectors With lug connectors With lug connectors Max. OpenCircuit Voltage (Invision 450 is 3-phase only.) MIGRunner cart Aluminum Running gear cylinder rack MIGRunner cart Running gear cylinder rack Steel MIGRunner cart Running gear cylinder rack Dimensions Net Weight 17”H x 12.5”W x 24”D 80 lb. (36.3 kg) (432 mm x 318 mm x 610 mm) 17.25”H x 14.5”W x 27.125”D (438 mm x 368 mm x 122 lb. (55.3 kg) 689 mm) www.greggdistributors.ca SP04-5 MILLER® MLR/2777/2784 MIG/GMAW Welders AlumaFeed™ SYNERGIC ALUMINUM WELDING SYSTEM •AlumaPower™ 350 model allows for any input voltage hookup (208–575 V) with no manual linking. 450 model is 230/460 V manual link or 575 V, three-phase only •Synchronized, true push-pull wire feed system for precise wire feeding and arc performance •Profile Pulse™ provides TIG appearance with MIG simplicity and productivity. Achieve ”stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance. •Synergic Pulsed MIG. As wire speed increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments. •Built-in MIG and Pulsed MIG programs automatically set the optimal parameters for a wide variety of wires making it easy to set up and use •Parameter and system locks enhance quality assurance and protect weld consistency •Trigger schedule select allows operator to change between two sets of weld parameters Processes: •Aluminum MIG (GMAW) • Aluminum Pulsed MIG (GMAW-P) Part No. 043810, Coolant. Part No. 907420, AlumaPower 350 MPa Power Source Only. 208–575 V. Part No. 300405, Industrial MIG 4/0 Kits with Dinse conPart No. 907420001, AlumaPower 350 MPa Power Source Only. 208–575 V nectors (350 MPa only). with auxiliary power. Part No. 907483, AlumaPower 450 MPa Power Source Only. 230/460 V with auxiliary power. Part No. 300390, Industrial MIG 4/0 Kits with lug connectors (450 MPa only) Part No. 907484, AlumaPower 450 MPa Power Source Only. 575 V Part No. 247831025, 25 ft. (7.6 m) Extension Cables. with auxiliary power. Part No. 247831050, 50 ft. (15 m) Extension Cables. Part No. 195445, MIGRunner™ Cart. Part No. 247831080, 80 ft. (24.4 m) Extension Cables. Part No. 043007, Coolmate™ 3. (AlumaPower 450 is 3-phase only.) Package Includes Model AlumaPower 350 MPa AlumaPower 450 MPa Package XR-AlumaFeed Feeder XR-Aluma-Pro™ Plus Part No. Part No. Push-Pull MIG Gun 951147300509 25-ft. air-cooled 951149300509 — 951151300509 25-ft. air-cooled 951460300509 25-ft. air-cooled 951459300509 25-ft. air-cooled 951558300509 — 951559300509 25-ft. water-cooled XR™-Pistol Grip Push-Pull MIG Gun — 30-ft. air-cooled — — — 30-ft. water-cooled — Industrial MIG 4/0 Kit Coolmate™ with Coolant — — — — With Dinse connectors — — — With lug connectors — — Coolmate 3 With lug connectors Coolmate 3 Note: All packages listed include gun drive rolls, feeder drive rolls and consumables for .035 and 3/64” (0.9 and 1.2 mm) wire. All systems come set up out of the box to run 3/64” wire. 1/16” consumables not included. Amps Input at Rated Output, 60 Hz Input Amp/Volt Rated Output KVA Range Power 208 V 230 V 400 V 460 V 575 V Three- 5 – 425 A 350 A at 34 VDC, 40.4 36.1 20.6 17.8 14.1 14.2 AlumaPower phase 10 – 38 V 60% duty cycle 350 MPa Single- 5 – 425 A 300 A at 32 VDC, 60.8 54.6 29.7 24.5 19.9 11.7 phase 10 – 38 V 60% duty cycle AlumaPower Three- 15–600 A 450 A at 36.5 VDC, — 49.4 — 27.2 23.6 21.6 450 MPa phase 10 – 38 V 100% duty cycle (23.5 on 575 V) Model No. Input Welding Circuit Rating KW Max. OpenCircuit Voltage 13.6 11.2 18.3 75 VDC 90 VDC Cart — — MIGRunner cart — MIGRunner cart — MIGRunner cart Dimensions Net Weight 17”H x 12.5”W x 24”D 80 lb. (36.3 kg) (432 mm x 318 mm x 610 mm) 17.25”H x 14.5”W x 27.125”D (438 mm x 368 mm x 122 lb. (55.3 kg) 689 mm) Maximum Spool Size Capacity 24 VAC, 5 A, 400 A at 100% duty cycle 50– 900 IPM .035 –.062" (0.9 – 1.6 mm) Requires wire kit 12" (305 mm) XR-AlumaFeed 50/60 Hz System duty cycle is limited (1.3–22.9 m/min.) #230708 for gun and drive roll kit #195591 for control Wire Feeder* to gun rating. box to run 1/16” (1.6 mm) wire Model No. Input Power Wire Feed Speed Wire Diameter Capacity Dimensions Net Weight 16”H x 9.5”W x 21.25”D (406 mm x 241 mm x 540 mm) 42.5 lb. (19.2 kg) *14-pin compliant, but only operates synergically with MPa power sources Multiprocess Welders Multimatic™ 200 •The only all-in-one, portable, multiprocess power source from Miller® is highly versatile •Weighing only 29 lbs. (13.2 kg) and running on either 120 or 230 volts, the Multimatic 200 can go anywhere you need to MIG, TIG or Stick weld •Multi-voltage plug (MVP™) allows connection to 115 or 230-volt receptacles without tools •Auto-Set™ Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use! •Excellent arc characteristics! Unit offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2. •Impact-resistant case provides strength and durability while protecting the internal components and welding wire Processes: •MIG (GMAW) •Flux-Cored (FCAW) •DC Stick (SMAW) •DC TIG (DC GTAW) Comes Complete with: 10-ft. (3 m) Bernard™ Q150 MIG gun, 13 ft. (4 m) cable with electrode holder and 25 mm Dinse connector, 10 ft. (3 m) work cable with clamp and 25 mm Dinse connector, Power cord with MVP plugs for 115 V and 230 V, Quick Select™ drive roll for .024” (0.6 mm) or .030/.035”(0.8/0.9 mm) solid wire, and .030/.035” (0.8/0.9 mm) flux-cored wire, Flow gauge regulator and gas hose for argon or AR/CO2 mix, extra contact tips, information/settings chart and material thickness gauge (#229895) Part No. 907518, Multimatic™ 200. 120/230 V. Part No. 300507, 14-Pin to 6-Pin Adapter Cord. Part No. 195184, RCCS-6M Remote Fingertip Control. Input Amperage Welding Range Mode/Process Power CV: MIG/ 120 VAC 30–140 Flux-Cored 230 VAC 30–200 CC: TIG 120 VAC 5–150 230 VAC 5–150 CC: Stick 120 VAC 20–150 230 VAC 20–150 SP04-6 Rated Output Amps Input at Rated Output, 50/60 Hz 120 V 90 A at 18.5 V, 60% duty cycle 18 110 A at 19.5 V, 20% duty cycle 20 150 A at 21.5 V, 20% duty cycle — 150 A at 16 V, 30% duty cycle 27 150 A at 16 V, 30% duty cycle — 100 A at 24 V, 35% duty cycle 24 150 A at 26 V, 30% duty cycle — GREGG DISTRIBUTORS LTD. 230 V — — 17.5 — 13.8 — 20.8 KVA 2.2 2.7 4.0 3.3 3.2 2.9 4.8 Wire Feed Speed Max. Open-Circuit Voltage Dimensions Net Weight KW 2 70– 425 IPM 90 VDC 14.5”H x 9.75”W29 lb. (13.2 kg) 2.6 (1.8–10.8 m/min.) x 17”D 3.8 (368 mm x 3.2 90 VDC (22 – 25 VDC, 248 mm x 3.0 sense voltage for Stick and 432 mm) 2.8 Lift-Arc™ TIG) 4.5 MILLER® MLR/2777/2784 Multiprocess Welders Shopmate™ 300 DX •An economical single-phase DC multiprocess power source that provides versatility and outstanding arc performance in CV mode (MIG) and CC mode (Stick and TIG) •Process selector switch is an ”operator-friendly” single process switch that eliminates the confusion of several switch combinations •Digital meters for presetting or monitoring voltage and amperage •Built-in 10-pin connector for direct hookup of Spoolmatic® spool guns and built-in 14-pin connector for direct hookup of 14-pin, Miller wire feeders and accessories •Fan-On-Demand™ cooling system operates only when needed •Line voltage compensation keeps welding parameters constant •Arc control adjusts inductance in MIG mode and DIG in Stick mode to optimize weld performance •Lift-Arc™ start provides DC TIG arc starting without the use of high frequency. Starts the arc without contaminating the weld with tungsten. Processes: •MIG (GMAW) •Flux-Cored (FCAW) •DC Stick (SMAW) •DC TIG (DC GTAW) MIG Package Comes Complete with: 22A wire feeder with Bernard™ gun, Shopmate 300 MIG kit consisting of flow gauge regulator and 10 ft. (3 m) gas hose for argon or AR/CO2 mix, 10 ft. (3 m) 1/0 interconnecting cable, 15 ft. (4.6 m) 1/0 work cable with clamp, and consumable storage box. Part No. 907315, Shopmate™ 300 DX. 200(208)/230 V Machine only. Part No. 907316, Shopmate™ 300 DX. 230/460/575 V Machine only. Part No. 951076, Shopmate™ 300 DX. 200(208)/230 V with MIG package. Part No. 951077, Shopmate™ 300 DX. 230/460/575 V with MIG package. Part No. 300145, Shopmate Running Gear/Dual Cylinder Rack. Part No. 300150, Shopmate 300 MIG Kit . Amperage Range Voltage Range 5 – 400 10 – 35 Rated Output 250 A at 30 VDC, 60% duty cycle Amps Input at Rated Output, 60 Hz Max. OpenDimensions Net Weight 208 V 230 V 460 V 575 V KVA KW Circuit Voltage (Includes lift eye) 24.5”H x 19”W x 177 lb. (80.3 kg) 66 57 29 23 13 11.2 80 VDC 25.5”D (622 mm x 483 mm x 648 mm) PipeWorx WELDING SYSTEM Simple process setup: •The front panel was designed by welders for welders •Requires just a few basic steps to set up a new weld process, resulting in less training time and minimizing errors from incorrect setups •Memory feature stores four programs for each selection: Stick, DC TIG, and MIG (left and right side of feeder). Eliminates the need to remember parameters True multiprocess machine: •Weld processes are optimized to deliver superior arc performance and stability specifically for root, fill, and cap passes on pipe •RMD and Pulsed MIG increase quality and productivity Quick process changeover: •Simply push a process selection button to choose a welding process •Eliminates set-up time and reduces the risk of weld reworks due to incorrect cable connections •PipeWorx ”Quick Select” technology automatically selects the welding process, the correct polarity, cable outputs, gas solenoid, and user-programmed welding parameters Single-system design: •One machine designed to perform all of your pipe welding needs •Simplified and optimized specifically for pipe welding Processes: •Stick (SMAW) •DC TIG (GTAW) (HF and Lift-Arc™) •MIG (GMAW) •Flux-Cored (FCAW) •RMD •Pulsed MIG (GMAW-P) Comes Complete with: Power source with cable hangers, Running gear with gas cylinder rack and handles, Dual feeder with drive rolls, Cable kit with 25 ft. (7.6 m) work sense lead, and Two 15 ft. (4.6 m) PipeWorx 300 guns Part No. 951381, 230/460 V PipeWorx Welding System Part No. 951382, 575 V PipeWorx Welding System Part No. 907382, 230/460 V PipeWorx Power Source only Part No. 907384, 575 V PipeWorx Power Source only Part No. 300365, Single-wire PipeWorx Feeder model only Part No. 300366, Dual-wire PipeWorx Feeder model only Part No. 057607, Single/dual feeder (left) Spool Cover. Part No. 090389, Dual feeder (right) Spool Cover. Part No. 194744, RFCS-14 HD Foot Control. Part No. Input Power Welding Mode/ Process 951381 230/460 V CC: Stick 951382 907382 907384 24 VAC, 11 A 230 V 460 V 575 V 40– 400 A 400 A at 36 VDC 43.9 26.6 22.4 17.5 21.2 22.3 16.1 16.3 16.4 575 V CC/DC: TIG 10– 350 A 350 A at 24 VDC 230/460 V CV: MIG/ 10– 44 V 400 A at 34 VDC Flux-Cored 575 V 29.3 18.2 13.5 11.8 14.5 13.4 10.7 10.6 10 42.9 24 20.5 17.3 19.2 20.5 16 15.8 16.2 100 V, 750 A at 100% duty cycle Rated Output at 100% Duty Cycle Amps Input at Rated Output, 60 Hz, 3-Phase Max. OpenCircuit Voltage 230 V 460 V 575 V 230 V 460 V 575 V PipeWorx Feeder Input Input Welding Power Circuit Rating Amp/ Voltage Ranges Wire Feed Speed Wire Diameter Capacity Maximum Spool Size Capacity 50–780 IPM (1.3 –19.8 m/min.) .035 –.062” (0.9 – 1.6 mm) 60 lb. (27 kg) KVA Dimensions KW 90 VDC Dimensions 28.5”H x 19.5”W x 31.75”D (724 mm x 495 mm x 806 mm) Net Weight 225 lb. (102 kg) Net Weight 14”H x 19”W x 29”D Single 65 lb. (29.5 kg) (356 mm x 483 mm Dual 90 lb. (41 kg) x 737 mm) Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. www.greggdistributors.ca SP04-7 MILLER® MLR/2777/2784 ® XMT Multiprocess Welders XMT® SERIES WELDERS Portability and excellent multiprocess arc performance make the XMT family the most popular in the industry. (XMT 450 is 3-phase only.) With many models to choose from the XMT family has the right solution for your business. Input Power Choices: •Auto-Link® (304 model) automatically links the power source to primary voltage being applied (230/460 VAC, single- or three-phase). (350 models) allows for any input voltage hookup. (208–575 VAC, single- or three-phase) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power. •Standard hookup (450 models). Available as 230/460 VAC manual link or 575 VAC models, three-phase only. Advanced Features for the Professional Welder: •Adaptive Hot Start™ makes starting stick electrodes easy without creating an inclusion •Infinite arc control available in the Stick and Wire modes for easier fine tuning of tough-to-weld materials and out-of-position applications •Lift-Arc™ provides arc starting that minimizes contamination of the electrode and without the use of high frequency •Welding Information Management System. XMT 14-pin models are Insight capable to monitor weld voltage, amperage, and arc-time and percentage. Reliability: •Wind Tunnel Technology.™ Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability •Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through machine Welder Friendly Control Panel: •Process selector switch reduces the number of control setup combinations without reducing any features •Ultratough, polycarbonate-blended cover protects front controls from damage •Large, dual digital meters are easy to view and presettable to ease setting weld output Output Connector Choices: •Dinse- or Tweco®-style weld disconnects (304/350 models) provide high-quality weld cable connections. (Note: Two Dinse connectors are supplied with each Dinse machine. Tweco connectors must be ordered separately.) •Studs (450 models) Processes: •MIG (GMAW) •Pulsed MIG (GMAW-P)* •Stick (SMAW) •TIG (GTAW) •Flux-Cored (FCAW) •Air Carbon Arc Cutting and Gouging (CAC-A) (Carbons — 304: 1/4”, 350: 5/16”, 450: 3/8”) *Only XMT CC/CV models with optional control and XMT MPa models. XMT® 304 CC/CV •Cost-effective multiprocess machine. •Auto-Link® automatically links the power source to primary voltage being applied (230 or 460 VAC, single– or three-phase). Part No. 951343, 208-230/460 V MIGRunner w/22A*. XMT® 350 VS •This simplified version is ideal for construction or fabrication applications in which the 14-pin receptacle is not needed for remote control or 14-pin feeders. Part No. 907224, 208–575 V. XMT® 350 CC/CV & 450 CC/CV •Flexibility and simplicity make this the most popular model. It has the core multiprocess capabilities along with the flexibility of a 14-pin for spool guns, feeders, and remote controls. •Stronger weld output for increased capabilities. The XMT 350 provides 24% more output than the 304 model for larger wires and stick electrodes. The XMT 450 provides 43% more output for Carbon Arc Gouging. XMT 350 CC/CV (Dinse) Part No. 907161, 208–575 V. Part No. 907161-01-1, 208–575 V w/auxiliary power. Part No. 951549, 208–575 V with SuitCase XT 12VS*. Part No. 951327, 208–575 V MIGRunner with 22A*. Part No. 951314, 208–575 V MIGRunner with S-74D*. XMT 450 CC/CV (1/2" stud) Part No. 907481, 230/460 V. Part No. 907482, 575 V. XMT® 350 MPa & 450 MPa •Built-in pulse programs for manufacturing and fabrication applications that have benefits for standard steels, high-strength steels and aluminum •Pulse programs provide reduced heat affected zone, weld in all positions, great for thick-to-thin metal, good gap filling ability and faster travel speeds and deposition •SharpArc® controls the arc in Pulsed MIG mode and gives total control over the arc cone shape, puddle fluidity and bead profile Additional features when using a 70 Series MPa Plus feeder or XR-AlumaFeed™ feeder. •Synergic Pulsed MIG — As you increase/decrease the wire feed speed, the pulse parameters increase/decrease, matching the right amount of power output to match the wire speed, eliminating the need to make additional adjustments •Profile Pulse™ provides TIG appearance with MIG simplicity and productivity. Achieve "stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance. •Added capabilities with Insight Core™. When using an MPa Plus feeder, wire deposition is added to the Insight Core capabilities XMT 350 MPa Part No. 907366, 208–575 V. Part No. 907366-01-1, 208–575 V w/auxiliary power. Part No. 907366-01-4, 208–575 V w/Tweco. XMT 450 MPa (1/2" stud) Part No. 907479, 230/460 V. Part No. 907479001, 230/460 V with auxiliary power. Part No. 907480, 575 V. Part No. 907480001, 575 V with auxiliary power. *Feeders include gun and drive rolls. MIGRunners add Industrial MIG 4/0 Kit and MIGRunner Cart. SP04-8 GREGG DISTRIBUTORS LTD. XMT® 350 & 450 ArcReach™ Systems •Remote control of the power source without a cord. With an ArcReach-equipped SuitCase® feeder and power source you can change the output voltage at the feeder, and save a trip to the power supply. No extra control cable to purchase, maintain, string or unstring— saving time and money. •More arc-on time and reduced exposure to workplace hazards for operators can be realized using ArcReach because less time is spent going back to the XMT to set process and arc voltage •Automatic process select to MIG/FCAW (with gas) if DCEP is detected or FCAW (no gas) if DCEN is detected, when ArcReach communication is established between the feeder and the XMT. Reduces need to access XMT •Automatic return to panel settings on XMT when ArcReach communication is terminated. For example, if the XMT is set to gouging at 350 amps and an ArcReach feeder is connected, the XMT will go to a MIG/FCAW process. If the feeder is disconnected, the XMT will go back to its previous setting (gouging at 350 amps). •Less operator fatigue by not needing to move or reposition both heavy secondary weld leads bundled with control cords on the worksite. Control cables are not used. •Operator can precisely set arc voltage at the feeder and monitor the actual arc voltage and current delivered to the weld using the digital meters on the feeder. This removes guesswork when it comes to adhering to weld procedures. •Remote override of XMT. When an ArcReach feeder is connected to an XMT the feeder has full control and the XMT controls are disabled. •Save time by no longer needing to troubleshoot welding system problems that result from damaged control cords •Eliminate costly control cord repairs because control cords are not used •Fleet compatibility. Works with any SuitCase feeder, but ArcReach benefit is realized with the ArcReach system. Part No. 907224002, XMT 350 ArcReach (Tweco®). 208–575 V. Part No. 907481002, XMT 450 ArcReach (1/2" stud). 230/460 V. MILLER® MLR/2777/2784 ® XMT Multiprocess Welders XMT SERIES WELDERS ® Input Power Model XMT 304 CC/CV 1-phase XMT 350 CC/CV 3-phase XMT 350 VS (no remote control) XMT 350 MPa XMT 350 ArcReach XMT 450 CC/CV 1-phase 3-phase XMT 450 MPa XMT 450 ArcReach 225 A at 29 VDC, 60% duty cycle Max.OpenCircuit Voltage 90 VDC 350 A at 34 VDC, 60% duty cycle 75 VDC Amp/Volt Ranges 5–400 A 10–35 V 5–425 A 10–38 V 5–425 A 10–38 V 15–600 A 10–38 V Rated Output 300 A at 32 VDC, 60% duty cycle** 450 A at 38 VDC, 100% duty cycle 90 VDC 450 A at 36.5 VDC, 100% duty cycle 450 A at 38 VDC, 100% duty cycle Dimensions Net Weight 17”H x 12.5”W x 24”D 79.5 lb. (36.1 kg) (432 mm x 318 mm x 610 mm) 17”H x 12.5”W x 24”D 80 lb. (36.3 kg) (432 mm x 318 mm x 610 mm) 17.25”H x 14.5”W x 27.125”D (438 mm x 368 mm x 689 mm) 122 lb. (55.3 kg) **Duty cycle rating below achieved with 6-gauge input power cord (8-gauge cord supplied with unit). Most popular accessories for all models Part No. 042537, Cylinder Cart. Part No. 300405, Industrial MIG 4/0 Kit for XMT 304/350. Part No. 195445, MIGRunner™ Cart. Part No. 300390, Industrial MIG 4/0 Kit for XMT 450. Part No. 300408, Running Gear Cylinder Rack. Part No. 195478, Protective Cover (XMT 304/350 only). Part No. 195286, Gas Valve Kit for XMT 350. Part No. 300928, Gas Valve Kit for XMT 450. Most popular accessories for non-VS models: Part No. 300509, XR-AlumaFeed™ Feeder for aluminum . Part No. 043389, Optima™ MIG Pulse Control. XMT® RACKS •XMT Rack conveniently houses multiple power sources for multiple welders. This is an ideal system for onsite applications including construction and shipbuilding. •Custom build your own rack by mix and matching XMT 304 CC/CV, 350 CC/CV, 350 VS, 350 MPa, 450 CC/CV and 450 MPa. (Rack holds a maximum of four of the XMT 450 models.) •All racks with factory-equipped power sources include fuses to provide primary power line protection for each inverter power supply on 460 or 575 VAC. (XMT 304 and 350: 20-amp fuses, XMT 450: 30-amp fuses.) Four-rack and six-rack models are available and come with two lift eyes for transportation and rugged skids for dragging or pushing. •Lift truck side and end pockets in base for forklift loading and worksite repositioning. Rack roof panel and power source shelves are fabricated from galvanized steel and painted for added protection in harsh environments. •Liquid-tight strain reliefs designed to resist salt water, alcohol, oil, grease and common solvents are provided on both the welding power source and electrical junction box •Isolated work terminal provides a connection point for common workpiece construction •Meets IP23 which is more stringent than IP23S or IP23M ratings •One connection allows up to six inverters to be connected with one primary power drop Model No. 4 Units Part No. Style 6 Units Part No. Style Input Power to Rack Dimensions (Includes lift eye) XMT 304 CC/CV Rack 907292 Dinse 907291 Dinse 3-phase, 230/460 VAC, 60 Hz (20 A fuses included) 59.375”H x 43”W x XMT 350 VS Rack —— 907228 Tweco® 3-phase, 208 – 575 VAC, 50/60 Hz (20 A fuses included) 34.375”D XMT 350 CC/CV Rack 907231 Dinse 907232 Dinse (1,508 mm x 1,092 907407 Tweco® 907406 Tweco® mm x 873 mm) XMT 450 CC/CV Rack 907607 1/2” studs — — 3-phase, 230/460 VAC, 60 Hz (30 A fuses included) 907608 1/2” studs — — 3-phase, 575 VAC, 60 Hz (30 A fuses included) Empty Rack195466 - Can contain XMT 304 or 350 (6 units); XMT 450 (4 units). Net Weight 4 Units: 560 lb. (254 kg) 6 Units: 712 lb. (323 kg) 4 Units 599 lb. (272 kg) 6 Units 759 lb. (344 kg) 780 lb. (354 kg) 279 lb. (127 kg) Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. www.greggdistributors.ca SP04-9 MILLER® MLR/2777 ® SuitCase Wire Feeders SuitCase® SERIES PORTABLE FEEDERS Use with CC (except 12RC model) and CV, DC power sources. Portable SuitCase feeders that set the standard for performance and provide extreme reliability to stand up to the demands of construction and fabrication. Setting the standard for performance: •Heavy-duty drive motor with tachometer control provides wire feed speed that is accurate and consistent from the start of the weld to the finish and from one weld to the next. Consistent wire feed speed is very important with large-diameter cored wire, because small changes in wire feed speed make large changes in deposition rates. •Front panel has trigger hold, wire jog, and gas purge for easy operator access. (X-TREME™ feeders only.) •Wide voltage range for small and large wires with no contactor chatter or arc outages •Ultra-low drag inlet guide pins make loading the wire easy and does not deform the wire on the way into the drive rolls improving wire feeding performance •Scaled wire pressure knob provides easy adjustment and consistent pressure on the drive rolls and wire •Digital meters with SunVision™ technology can display voltage, wire feed speed, and also amperage if desired. Meters can be seen clearly even in direct sunlight. (Meters are optional on 8VS.) Unique and durable case: •Impact-resistant, flame-retardant case provides strength and durability, and protects components and welding wire from moisture, dust and other contaminants •Builtin slide rails allow you to drag the feeder into position for welding •Innovative feeder door design allows you to change wire while feeder is standing upright or laying down •Case is available in two sizes. (X-TREME™ feeders only.) Extreme reliability: •Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation. •Gun locking tab works with guns having corresponding locking grooves to prevent gun from being pulled out if the feeder is dragged by the gun •Gas inlet recessed into back of case is protected from incidental contact by the weld cable, ensuring consistent and contaminant-free shielding gas delivery to the gun. Double-filtered gas valve helps keep dirt from clogging and affecting gas flow. SuitCase® X-TREME™ 8VS & 12VS •Voltage-sensing feeders designed to run off of arc voltage from almost any welding power source •8VS model is sized for an 8” spool of wire, can be carried to remote welding sites and fits through a 14” manhole/manway •12VS model is sized for an 8 or 12” spool of wire •12” spools are the most common in structural steel and fabrication SuitCase® X-TREME™ 8VS & 12VS ArcReach™ •Remote control of the power source without a cord •With an ArcReach-equipped SuitCase® feeder and power source you can change output voltage at the feeder, and save a trip to the power supply. •No extra control cable to purchase, maintain, string or unstring—saving time and money SuitCase® 12RC •Standard remote voltage control saves the operator a trip back to the power supply for welding adjustments •For applications where the feeder is within 100 feet of the power source and control cords are acceptable Processes: • MIG (GMAW) • Flux-Cored (FCAW) Comes Complete with: Bernard™Q300 MIG gun with reversible dual size (.045 and 1/16”) VK drive rolls. 12VS model is also available with Dura-Flux™Flux-Cored gun with reversible dual size (.068/.072 and 5/64”) VK drive rolls. ArcReach™models are also available with Bernard S-Gun™ with reversible dual size (.045 and 1/16”) VK drive rolls. Part No. 951583, SuitCase X-TREME 8VS with Bernard Q300 gun (no meters). Part No. 951582, SuitCase X-TREME 8VS with Bernard Q300 gun Part No. 951543, SuitCase X-TREME 12VS with Bernard Q300 gun Part No. 951544, SuitCase X-TREME 12VS with Bernard Dura-Flux gun Please see pg. SP04-02 for more information Part No. 951588, SuitCase X-TREME 8VS ArcReach with Bernard S-Gun about the Miller Welding icons and symbols. Part No. 951584, SuitCase X-TREME 8VS ArcReach with Bernard Q300 gun Part No. 951589, SuitCase X-TREME 12VS ArcReach with Bernard S-Gun Part No. 951581, SuitCase X-TREME 12VS ArcReach with Bernard Q300 gun Part No. 951580, SuitCase 12RC with Bernard Q300 gun Part No. 951599, SuitCase 12RC with Bernard Q300 gun, lift eye, and flowmeter SUGGESTED POWER SOURCES •Invision™ MPa Series •Dimension™ Series •XMT® Series (VS model not compatible with RC feeder) •Bobcat™ Series •Trailblazer® Series •Big Blue® Series Note: Full functionality of ArcReach is only available with ArcReach power sources. RC feeder requires power source with 14-pin connector. SUGGESTED GUNS •Bernard™ Q300 (GMAW) •Bernard™ S-Gun™ (GMAW) •Bernard™ Dura-Flux™ (FCAW) •Roughneck® (GMAW) • Ironmate™ FC-1260 (FCAW) Model No. Input Power SuitCase X-TREME 8VS Operates on openSuitCase X-TREME 12VS circuit voltage and arc voltage: 14– 48 SuitCase X-TREME 8VS VDC/110 Max. OCV ArcReach SuitCase X-TREME 12VS ArcReach 24 VAC, 10 A, SuitCase 12RC 50/60 Hz Input Welding Circuit Rating Wire Feed Speed Wire Type and Diameter Capacity 330 A at Solid Wire .023 –.052” (0.6 –1.4 mm) 60% duty cycle 50–780 IPM (1.3 –19.8 Flux-Cored .030 – 5/64” (0.8 – 2.0 mm) 425 A at m/min.) Actual range in Solid Wire .023 –.052” (0.6 –1.4 mm) 60% duty cycle CC mode is dependent Flux-Cored .030 – 5/64” (0.8 – 2.0 mm) 330 A at on arc voltage applied Solid Wire .023 – .062” (0.6 – 1.6 mm) 60% duty cycle Flux-Cored .030 – .062” (0.8 – 1.6 mm) 425 A at Solid Wire .023 – 5/64” (0.6 – 2.0 mm) 60% duty cycle Flux-Cored .030 – 5/64”(0.8 – 2.0 mm) 425 A at 50–700 IPM Solid Wire .023 –.052” (0.6 –1.4 mm) 60% duty cycle (1.3 –17.8 m/min.) Flux-Cored .030 – 5/64” (0.8 – 2.0 mm) SP04-10 GREGG DISTRIBUTORS LTD. Maximum Spool Size Capacity 8” (203 mm), 14 lb. (6.4 kg) 12” (305 mm), 45 lb. (20 kg) 8” (203 mm), 14 lb. (6.4 kg) 12” (305 mm), 45 lb. (20 kg) 12” (305 mm), 45 lb. (20 kg) Dimensions Net Weight 12.75”H x 7.25”W x 18”D 28 lb. (13 kg) (324 mm x 184 mm x 457 mm) 15.5”H x 9”W x 21”D 35 lb. (15.9 kg) (394 mm x 229 mm x 533 mm) 12.75”H x 7.25”W x 18”D 28 lb. (13 kg) (324 mm x 184 mm x 457 mm) 15.5”H x 9”W x 21”D 35 lb. (15.9 kg) (394 mm x 229 mm x 533 mm) 15.5”H x 9”W x 21”D 31 lb. (14.1 kg) (394 mm x 229 mm x 533 mm) MILLER® MLR/2777/2784 Wire Feeders 20 Series 70 Series •Designed for manufacturing, our popular bench feeders are available in two series with multiple models to fit your needs •Trigger hold allows the operator to make long welds without having to hold the trigger continuously. Reduces operator fatigue. •Miller® standard, quick-change drive rolls save time •Quick-release drive-roll pressure arm allows drive roll change without losing spring preload setting •Easy loading and threading of welding wire without having to release the drive-roll pressure arm •Each feeder includes a 15-foot Bernard Q300 (20 Series) or Q400 (70 Series) MIG gun (two with dual-wire models), plus a 10-foot 14-pin interconnecting cord Additional Features for 70 Series Feeders: •Available in dual-wire models which allows two different wire types to be available on one feeder, avoiding downtime from changing spools and drive rolls •Toolless rotatable drive assembly allows operator to rotate the drive housing, allowing a straight path for wire flow •High-torque permanent-magnet motor, sealed ball bearing gear drive and solid-state speed and brake control are maintenance free for long life •Trigger dual schedule for easily changing weld parameters while welding. Achieves the best weld settings for different joint configurations. (DX and MPa models only.) 20 SERIES INDUSTRIAL & 70 SERIES HEAVY-INDUSTRIAL BENCH FEEDERS 22A & 24A •Simple and cost-effective feeders for industrial manufacturing and fabricating •Ideal for most high-duty-cycle applications requiring day-in/day-out trouble-free operation •On-board burnback and motor ramp control for excellent starting and stopping performance •Two gear-driven drive rolls on 22A and four gear-driven drive rolls on 24A provide smooth, positive wire feed Additional features for 24A feeder: •Remote voltage control at feeder for easier adjustments in the weld cell •Adjustable run-in control for better arc-starting performance on a variety of wires •Four gear-driven drive rolls provide more consistent feeding on larger wire diameters 74S & 74D •Standard, simple feeders for most heavy-industrial applications, with the 74D providing increased accuracy and control of the most common weld parameters •Digital meters (74D models only) ensure accuracy when presetting and reading actual voltage, amperage and wire feed speed •Remote voltage control (74D models only) allows you to set both voltage and wire feed speed at the feeder, saving time and increasing weld quality because optimal weld parameters are easy to set 74DX •Adds features for weld control and programs •Adjustable run-in control for improved arc starts •Dual schedule control allows the operator to switch between two preconfigured welding parameters without readjusting the machine, saving time and enhancing quality •Trigger program select provides the ability to access any of the four active programs •Sequence control gives the operator the ability to adjust all of the welding parameters: preflow, run-in, weld time, crater, burnback and postflow •Locks and limits for restricting or limiting operator adjustments, such as voltage and wire feed speed parameters •Four weld program memories allow operators to recall up to four previously used processes and their weld settings 74 MPa Plus •Adds push-pull aluminum capabilities. Optimized with Invision™ MPa or XMT® MPa power sources. •Recommended aluminum solution. Dedicated XR Plus guns (gooseneck and pistol grip) work with MPa Plus feeders to coordinate wire feed speed of the gun and the feeder. This provides optimized aluminum feeding and welding performance. •Trigger schedule select saves time when switching between two weld settings by simply tapping gun trigger •Accu-Mate™ properly seats the MIG gun power pin for best feeding performance •Alumination™ gives you the ability to use the extended reach of a push-pull system for consistent, versatile and dependable aluminum wire feeding Additional features when used with Invision MPa or XMT MPa power sources: •Synergic Pulsed MIG. As wire speed increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments •Profile Pulse™ provides TIG appearance with MIG simplicity and productivity. Achieve “stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance. Processes: • MIG (GMAW) • Flux-Cored (FCAW) • Pulsed MIG (GMAW-P) with MPa Plus feeder and optional MPa power source Comes Complete with: Models include Bernard™Q300 (20 Series) or Q400 (70 Series) MIG gun (two with D-74 models), .035/.045” drive rolls and Centerfire™contact tips. Model No. 22A 22A 22A 24A 24A S-74S S-74D S-74DX S-74DX S-74 MPa Plus D-74S D-74D D-74DX Input Power 951190- 24 VAC, 7 A, 951191 Run-in control 50/60 Hz 951192 Digital display and voltage control 951193- 951194 Digital display 24 VAC,10 A, 951196Single-wire 50/60 Hz 951198Single-wire 951200 Single-wire with standard motor 951202 Single-wire with low-speed motor 951291Single-wire 951203Dual-wire 951204Dual-wire 951206Dual-wire Part No. Features SUGGESTED POWER SOURCES •CP-302 (22A only) •Deltaweld® Series •Invision™ MPa Series •Dimension™ Series •XMT® Series (except VS model) SUGGESTED GUNS •Bernard™ •XR-Aluma-Pro™ Plus and XR™-Pistol Plus Dimensions Net Weight 75– 750 IPM 22A: .023 – 5/64” (0.6 – 2.0 60-lb. (27 kg) coil mm) (1.9 –19 m/ with optional wire reel 24A:.023 – 3/32” (0.6 – 2.4 min.) assembly #108008 mm) 11”H x 10.75”W x 23.5”D (279 mm x 273 mm x 597 mm) 22A: 36 lb. (15.4 kg) 24A: 40 lb. (18 kg) 50–780 IPM .023 –1/8” (0.6 – 3.2 mm) Low speed motor required for 1/8” (3.2 (1.3 –19.8 m/ mm) diameter wire (factory option) min.) MPa Plus model 14”H x 12.5”W x 28”D (356 mm x 318 mm x 711 mm) 58 lb. (26 kg) Wire Feed Speed Wire Type and Diameter Capacity Maximum Spool Size Capacity Hard Wire: .035 –5/64” (0.9 – 2.0 mm) Aluminum**: .035 –.052” (0.9 – 1.3 mm) 14”H x 21”W x 35”D (356 mm x 533 mm x 889 mm) 87 lb. (39.5 kg) 20 SERIES INDUSTRIAL & 70 SERIES HEAVY-INDUSTRIAL BENCH FEEDERS ACCESSORIES Part No. 142382, Feeder Cart. Part No. 047141, Spool Adapter. Part No. 146236, Turntable Assembly. Part No. 058435, Hanging Bail. Part No. 108008, Wire Reel Assembly. Part No. 057607, Spool Covers For 20 and 70 Series single-wire models and left side of dual-wire models. Part No. 090389, Spool Covers For right side of dual-wire models. 20 & 70 SERIES PUSH-PULL GUNS Model No. XR-Aluma-Pro Plus (Air-cooled) XR-Aluma-Pro Plus (Water-cooled) XR-Pistol Plus (Air-cooled) XR-Pistol Plus (Water-cooled) 15 ft. (4.6 m) Part No. 300000001 300003001 Cable Length 25 ft. (7.6 m) Part No. 300001001 300004001 35 ft. (10.6 m) Part No. - - 300753 - 300754 300757 300755 - Welding Current Rating Wire Feed Speed 300 A at 100% duty cycle 70–900 IPM 400 A at 100% duty cycle (1.8–23 m/min.) 200 A at 100% duty cycle 400 A at 100% duty cycle Wire Type and Diameter Capacity Aluminum .030 –.052” (0.8–1.3 mm) Dimensions Net Weight 5”H x 2.5”W x 17”L 2.5 lb. (1.1 kg) (127 mm x 64 mm x 2.9 lb. (1.3 kg) 432 mm) 7.375”H x 1.875”W x 2.2 lb. (1 kg) 10.625”L (187 mm x 2.4 lb. (1.1 kg) 48 mm x 270 mm) www.greggdistributors.ca SP04-11 MILLER® MLR/2777/2784 Wire Feeders 70 SERIES Swingarc™ •Swingarc boom-mounted wire feeders bring an extra dimension of flexibility and efficiency to weld stations dealing with large weldments, or wherever operator mobility is required •Single- and dual-wire models with 8, 12 or 16 ft. booms are sized to accommodate a variety of weld cell layouts (16, 24 or 32 ft. diameter work area) •Counterbalance design makes it easy to position boom and 360° rotation and 60° lift angle maximizes work area •In-boom cable routing organizes hoses and cables for a cleaner work environment •Each feeder includes a 15 ft. Bernard Q400 MIG gun (two with dual-wire models), plus a 10 ft. 14-pin interconnecting cord to connect power source to boom control •MPa Plus Swingarcs. Optimized for the Invision™ MPa and XMT® MPa power sources and available with single or dual-wire feeders and three boom lengths. SUGGESTED POWER SOURCES Processes: •CP-302 (22A only) •Deltaweld® Series •Invision™ MPa •MIG (GMAW) •Flux-Cored (FCAW) Series •Dimension™ Series •XMT® Series (except VS model) Comes Complete with: Models include Bernard™Q400 MIG gun, .035/.045” drive rolls and Centerfire™contact tips. Single-Wire Feeders Stock No. Part No. 8-ft. (2.4 m) Boom SS-74S8 951522 SS-74D8 951525 SS-74DX8 951528 SS-74MPa Plus-8 951437 12-ft. (3.7 m) Boom SS-74S12 951523 SS-74D12 951526 SS-74DX12 951529 SS-74MPa Plus-12 951438 16-ft. (4.9 m) Boom SS-74S16 951524 SS-74D16 951527 SS-74DX16 951530 SS-74MPa Plus-16 951439 Model No. Part No. 183997, Swingpak™ Base. Part No. 149838, 4 ft. Pipe Post with 18” Base. Part No. 149839, 6 ft. Pipe Post with 18” Base. Use with CV, DC power sources. Input Dual-Wire Feeders Wire Feed Speed Power Stock No. Part No. DS-74S8 951531 24 VAC, 10 A, 50–780 IPM DS-74D8 951534 50/60 Hz (1.3 –19.8 m/min.) Consult factory for lowDS-74DX8 951537 and high-speed motor DS-74MPa Plus-8 951440 options on non-MPa DS-74S12 951532 feeders DS-74D12 951535 DS-74DX12 951538 DS-74MPa Plus-12 951441 DS-74S16 951533 DS-74D16 951536 DS-74DX16 951539 DS-74MPa Plus-16 951442 Wire Diameter Maximum Spool Net Weight with Feeder Capacity Size Capacity .023 –5/64 in. 60-lb. (27 kg) coil Single-Wire Feeder: (0.6 – 2.0 mm) with optional wire 110 lb. (50 kg) reel assembly Dual-Wire Feeder: #108008 134 lb. (61 kg) Single-Wire Feeder: 160 lb. (73 kg) Dual-Wire Feeder: 207 lb. (94 kg) Single-Wire Feeder: 210 lb. (95 kg) Dual-Wire Feeder: 280 lb. (127 kg) Single/Dual Spool Carrier (Pipe Post not included). Designed to put spool hub assembly at 36” from base for easier wire spool installation. Part No. 300353, For 4-ft. post. Part No. 300352, For 6-ft. post. 70 SERIES REMOTE CONFIGURATIONS •Remote wire feeder control box and wire drive assembly for non-Miller boom applications. Processes: •MIG (GMAW) •Flux-Cored (FCAW) Single-wire Control Box Part No. 300881, S-74S. Part No. 300882, S-74D. Part No. 300883, S-74DX. Part No. 300738, S-74 MPa Plus. Use with CV, DC power sources. Gun NOT included. Must be ordered separately. Motor Control Cable Standard: 11 conductor MPa Plus: 14 conductor Motor Control Cable 11 conductor Wire Drive Motor Assembly •MPa Plus drive can be used with push-only guns, or XRAlumaPro™ Plus and Pistol Plus push-pull guns. Part No. 300904, Standard left-hand drive. Part No. 300740, MPa Plus left-hand drive. Motor Control Cable Standard: 11 conductor MPa Plus: 14 conductor Gun NOT included. Must be ordered separately. Push-only wire drive motor assembly Part No. 300741001, Standard right-hand drive. Part No. 300741, MPa Plus right-hand drive. Motor Control Cable (11 conductor)* •For push-only gun configurations. Part No. 254935010, 10 ft. (3 m) Part No. 254935025, 25 ft. (7.6 m) MPa Plus Motor Control Cable (14 conductor)* •For MPa Plus configurations only — single-wire or left side of dual-wire. Part No. 254864010, 10 ft. (3 m) Part No. 254864025, 25 ft. (7.6 m) Part No. 195369, Feeder Base - For use with spooled wire. SP04-12 GREGG DISTRIBUTORS LTD. Dual-wire control box Part No. 300886, D-74S. Part No. 300887, D-74D. Part No. 300888, D-74DX. Part No. 300739, D-74 MPa Plus. Gun NOT included. Must be ordered separately. Wire drive motor assembly •MPa Plus drive can be used with push-only guns, or XRAlumaPro™ Plus and Pistol Plus push-pull guns. Part No. 300904, Standard left-hand drive. Part No. 300740, MPa Plus left-hand drive. Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. MILLER® MLR/2777/2784 SMAW/Stick Welders Thunderbolt XL 225 AC & 225 AC/150 DC ® •Economical Stick machines with precise, dependable control •Accu-Set™ amperage indicator provides precise heat control •Unit allows higher duty cycle when amperage decreases •Infinite current control allows the operator to adjust output by as little as one-amp increments •Output selector switch on AC/DC units allows you to quickly select AC, DCEP or DCEN without adjusting the output leads •Certified by Canadian Standards Association to both the Canadian and U.S. Standards Processes: •Stick (SMAW) Comes Complete with: 15 ft. (4.5 m) No. 4 electrode cable with heavy-duty electrode holder, 10 ft. (3 m) work cable with clamp, and Power cord with plug Part No. 903641, Thunderbolt XL 225 AC (CSA). 230 V, 50/60 Hz. Part No. 903642, Thunderbolt XL 225 AC/150 DC (CSA). 230 V, 50/60 Hz. Part No. 043927, Thunderbolt XL Running Gear. Welding Mode AC AC DC Part No. 903641 903642 Welding Amp Range 30–235 30–235 30–160 225 AC model is AC only. Rated Output at 20% Duty Cycle, 60 Hz Rated Output at Amps Input at Max. OpenDimensions (15% Duty Cycle, 50 Hz) 100% Duty Cycle Rated Output Circuit Voltage 225 A at 25 VAC 100 A 47.5 80 18.75”H x 12.75”W x 225 A at 25 V 100 A 47.5 80 17.5”D (476 mm x 323 150 A at 25 V 65 A mm x 445 mm) Net Weight 85 lb. (39 kg) 104 lb. (47 kg) Dialarc® 250 AC/DC •Superb performance and versatility in a flexible Stick machine •Single-dial infinite current control simplifies and allows precise weld output adjustment •High and low ranges for both AC and DC allow greater control of weld performance •Forced-draft cooling fan ensures cooler running product, extending life of power source •Superior 6010 and 7018 Stick welding performance offers wide range of electrode versatility •High output and duty cycle allow unit to handle nearly all Stick welding needs •Optional remote weld output control provides current control without going back to power source saving time and effort Processes: •Stick (SMAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (3/16” carbons) Part No. 907017, Dialarc without Power Factor Correction. 200(208)/230/460 V. Part No. 242199020, RFC-23A Remote Foot Control. Part No. 242210020, RHC-3 Remote Hand Control. Part No. 907015, Dialarc with Power Factor Correction. 208/230/460/575 V. Part No. 041580, No. 19 Running Gear. Model No. Dialarc w/o Power Factor Correction Dialarc w Power Factor Correction Welding Mode AC DC AC DC Welding Amp Range 35–300 35–265 35–300 35–265 Rated Output at 30% Duty Cycle 225 A at 29 VAC 225 A at 29 VAC 225 A at 29 VAC 225 A at 29 VAC Amps Input at Rated Output, 60 Hz Max. OpenDimensions 200 V 208 V 230 V 460 V 575 V KVA KW Circuit Voltage 84 — 73 36 29 16.8 9.8 70 24.25”H x 19”W x 28”D (616 mm x 483 mm x 92 — 80 40 32 18.6 11.8 79 — 60 55 27 22 12.5 9.9 70 711 mm) — 66 60 30 24 13.7 10.8 79 Net Weight 360 lb. (163 kg) 365 lb. (166 kg) Maxstar® 150 S •Provides maximum portability and performance in a compact Stick package. Packs dependability and performance all in one machine. •Multi-voltage plug (MVP™) allows connection to 120 or 240-volt receptacles without tools. Choose the plug that fits the receptacle and connect it to the power cord. •Portable with adjustable shoulder strap. Easy to transport at only 13.2 pounds. •Allows for any input voltage hook-up (120–240 V) with no manual linking, providing convenience in any job setting •Adaptive Hot Start™ for Stick arc starts reduces electrode sticking •Single amperage range allows operator to accurately set amperage on both 120 or 240-volt primary power Processes: •Stick (SMAW) Comes Complete with: 10 ft. power cord with MVP plugs for 120 V and 240 V, 13 ft. (4 m) electrode cable with holder and 25 mm Dinse connector, and 10 ft. (3 m) work cable with clamp and 25 mm Dinse connector Part No. 300184, Protective X-CASE™. Part No. 907134, 115-230 VAC, 50/60 Hz. Part No. 907134012, 115-230, 50/60 Hz with X-CASE. Input Power 115 VAC 230 VAC Welding Amp Range 20–100 20–150 Rated Output 100 A at 24 VDC, 35% duty cycle 150 A at 26 VDC, 30% duty cycle Amps Input at Rated KVA at Output, 50/60 Hz Duty Cycle 26.4 3.0 21.6 4.9 KW 3.0 4.7 Max. OpenDimensions Circuit Voltage 9”H x 5.5”W x 13.25”D 90 (12 –16 VDC*) (229 mm x 140 mm x 337 mm) Net Weight 13.2 lb. (6.0 kg) *Sense voltage for Stick. Maxstar® 200 STR •Maximum flexibility with automatic connection to any input power while maintaining the best DC Stick/TIG welding performance in its product class •Allows for any input voltage hook-up (120–480 V) with no manual linking, providing convenience in any job setting •Lift-Arc™ provides TIG arc starting without the use of high frequency •Low OCV Stick model reduces open-circuit voltage to 9–14 VDC. This eliminates the need for add-on voltage reducers. •Excellent for thin/medium wall pipe welds •Remote amperage control •Adaptive Hot Start™ for Stick arc starts •Portable with adjustable shoulder strap Processes: •Stick (SMAW) • TIG (GTAW) Comes Complete with: 8 ft. (2.4 m) power cord (no plug) and Two 50-mm Dinse connectors Part No. 907036, Low OCV. Part No. WP-17V-12-R, 12.5-ft. (3.8 m) Weldcraft™ A-150V TIG torch. Part No. 907036001, Normal OCV. Part No. 195321, Protective Cover. Amps Input at Rated Load Output, 50/60 Hz Max. OpenWelding Input Welding Rated Output Dimensions Process Power Amp Range 115 V 230 V 400 V 460 V KVA KW Circuit Voltage Stick 3-phase 1–200 150 A at 26 V, 60% duty cycle — 13.1 7.4 6.4 5.2 5.0 80 VDC 13.5"H x 7.5"W x 17.5"D 1-phase 1–200 150 A at 26 V, 60% duty cycle — 21.7 — — 5.0 5.0 (9 –14 VDC*) (343 mm x 191 mm x 1–90 125 A at 25 V, 50% duty cycle 34.1 — — — 4.0 3.8 445 mm) TIG 3-phase 1–200 175 A at 17 V, 60% duty cycle — 10.5 6.0 5.2 4.2 4.0 80 VDC 1-phase 1–200 175 A at 17 V, 60% duty cycle — 17.4 — — 4.0 4.0 (9 –14 VDC*) 1– 150 (120 V) 150 A at 16 V, 70% duty cycle 29.7 14.1 — — 3.4 3.4 Net Weight 32 lb. (14.5 kg) *Sense voltage for Stick and Lift-Arc TIG. www.greggdistributors.ca SP04-13 MILLER® MLR/2777/2784 SMAW/Stick Welders Gold Star® SERIES •Rugged, reliable performance and superior arc characteristics. •Hot Start™ and built-in arc control •Enclosed circuit board •Thermal overload protection with light •Fan-On-Demand™ •15 A, 115 VAC duplex receptacle •Power efficient •Remote control capability •Optional digital volt and amp meters Processes: • Stick (SMAW) •TIG (GTAW) •Air Carbon Arc Cutting and Gouging (CAC-A) (carbons — 452: 5/16”, 652: 3/8”) •Flux-Cored (FCAW) •MIG Spray Transfer (GMAW) with voltage-sensing feeder Part No. 903374, Gold Star 452. 200(208)/230/460 V. Part No. 903400, Gold Star 452. 230/460/575 V. Part No. 903402, Gold Star 652. 230/460/575 V. Amps Input at Rated Output, 60 Hz Dimensions Amperage Range Max. OpenRated Output in CC Mode 200 V 230 V 460 V 575 V KVA KW Circuit Voltage (Includes lift eye and strain relief) Gold Star 452 20–590 450 A at 38 VDC, 60% duty cycle 102 89 45 36 35.5 23.3 72 VDC 30”H x 23”W x 38”D Gold Star 652 50–850 650 A at 44 VDC, 60% duty cycle — 124 62 50 49.4 36 72 VDC (762 mm x 585 mm x 966 mm) Net Weight Model No. 404 lb. (183 kg) 505 lb. (229 kg) CST™ 280 •Durable power source designed for the construction industry. Ideal for Stick electrodes up to 3/16” and TIG welding of pipe and plate. •Easy voltage changeover between voltage ranges through a two-position manual switch located on the rear panel. Simplifies voltage change in racks. •Process selector knob automatically sets proper DIG setting on E6010 and E7018 stick electrodes for better performance •Lift-Arc™ for TIG arc starts without the use of high frequency •Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine •Remote amperage control through the 14-pin connector Processes: •Stick (SMAW) •TIG (GTAW) Comes Complete with: One set of male connectors (Dinse-style model only) Part No. 907244, Dinse. 220-230/460-575 V. Part No. 907244011, Tweco®. 220-230/460-575 V. Part No. 907251, Dinse. 208-230/400-460 V. Part No. 907251011, Tweco®. 208-230/400-460 V. Input Welding Power Amp Range 220-230/460-575V 3-phase 5–280 1-phase 5–200 208-230/400-460V 3-phase 5–280 1-phase 5–200 Voltage Range Rated Output 280 A at 31.2 V, 35% duty cycle 200 A at 28 V, 100% duty cycle 200 A at 28 V, 50% duty cycle 150 A at 26 V, 100% duty cycle 280 A at 31.2 V, 35% duty cycle 200 A at 28 V, 100% duty cycle 200 A at 28 V, 50% duty cycle 150 A at 26 V, 100% duty cycle 208 V — — — — 36.0 23.5 43.9 35.0 Amps Input at Rated Load Output, 50/60 Hz Max. Open220 V 230 V 400 V 440 V 460 V 575 V KVA KW Circuit Voltage 35.0 34.2 — — 17.8 14.7 14.6 10.2 77 VDC 23.3 22.5 — — 11.7 9.7 9.6 6.4 43.9 43.0 — — — — 10.1 6.6 32.7 32.0 — — — — 7.3 4.6 — 34.0 19.8 18.0 17.5 — 14.0 10.2 67 VDC — 22.8 13.5 12.0 12.7 — 10.2 6.9 — 43.0 — — — — 9.9 6.5 — 32.9 — — — — 7.6 4.8 Dimensions Net Weight 13.5”H x 41 lb. 7.5”W x 18”D (18.6 kg) (343 mmx 191 mm x 457 mm) CST™ 280 Racks •Rugged enclosure provides simple means for protecting and transporting multiple welding power sources for construction, maintenance/repair and shipbuilding applications •Light weight and small footprint for easy transportation •The low weight enables the use of elevators to move the rack •All controls including power switch are located on front of machine for easy access •Top cover protects machines from falling debris •Lift eye simplifies crane or overhead lifting device transport •Lift truck fork pockets •One main disconnect box with branched fusing for each machine •Common output ground connection (for same polarity use only) •Optional rack running gear available for moving the rack Processes: • Stick (SMAW) • TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (5/16”. carbons with paralleled CST 280s) Part No. 907247, Tweco® 4-Pack Rack. Part No. 907245, Dinse 4-Pack Rack. Part No. 907365, Tweco® 8-Pack Rack. Part No. 195051, Empty Rack. Part No. 195114, 4-Pack Rack Running Gear. Part No. 195436, 8-Pack Rack Running Gear. Model No. 4-Pack Rack Amps Input at Rated Output, 50/60 Hz Rack Input Power to Rack* Capacity 220 V 230 V 400 V 440 V 460 V 575 V 4 units 3 -phase, 220-230/460-575 V, 50/60 Hz. 137 134 79 72 70 57 KVA KW 58.4 50.75”H (1289 mm) 40.8 355 lb. (161 kg) 4-pack: 25.5”W (648 mm) 8-pack: 46”W (1168 mm) 640 lb. (290 kg) 81.6 26.5”D (673 mm) — Same as 4-pack rack 166 lb. (75 kg) 8-Pack Rack 8 units 274 268 158 145 140 114 116.8 Empty Rack 4 units — — — — — — — Note: CST 280s are factory-linked for 460-575 V. Dinse units include one set of male connectors; Tweco units do not. See above for information on CST 280. SP04-14 GREGG DISTRIBUTORS LTD. Dimensions Net Weight MILLER® MLR/2777/2784 GTAW/TIG Welders Diversion™ 165 & 180 AC/DC TIG •Professional-grade arc in a package designed specifically for personal users. Contains all of the features you need—simplicity combined with superior performance and value. •Easy-to-understand operator interface. Power up, select material type, set material thickness range and start welding! •Inverter-based, AC/DC power source provides a more consistent welding arc while using less power •HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination •Fan-On-Demand™ cooling system only operates when needed to reduce noise and maintenance •Portable. Easy to transport at 50 pounds. •Auto-postflow protects the weld end zone and electrode by optimizing post flow time based on welding amperage •Advanced squarewave AC provides a fast freezing weld puddle and deeper penetration •Weldcraft™ A-150 torch with Diamond Grip™ provides more comfortable grip and reduces operator fatigue •Diversion 180 includes multi-voltage plug (MVP™) which allows connection to 120 or 240-volt receptacles without tools. Choose the plug that fits the receptacle and connect it to the cord. Processes: •TIG (GTAW) Comes Complete with: Power cord with 50 A, 240 V plug (165 model) or MVP plugs for 120 V and 240 V (180 model), 12.5 ft. (3.8 m) Weldcraft™ A-150 TIG torch, 12 ft. (3.7 m) work cable with clamp, RFCS-RJ45 remote foot control, and Flow gauge regulator with hose Part No. 907626, Diversion 165. Steel Welding Capability Aluminum Welding Capability Part No. 907627, Diversion 180. Min - 0.030” (0.75 mm) Part No. 301239, Running Gear/Cylinder Rack. Min - 0.025” (0.6 mm) Max - 3/16” (4.8 mm) Max - 3/16” (4.8 mm) Part No. 300579, Protective Cover. Part No. 300688, RJ45 to 14-Pin Adapter Cord. Input Welding Amp. Power Range Diversion 165 230 VAC 10 –165 Diversion 180 115 VAC 10 –125 230 VAC 10 –180 Model Rated Output 150 A at 16 V, 20% duty cycle 165 A at 16.6 V, 15% duty cycle 125 A at 15 V, 35% duty cycle 150 A at 16 V, 20% duty cycle 180 A at 17.2 V, 10% duty cycle Amps Input at Rated Output 23 (.20*) 25.5 (.20*) 26.5 (.88*) 16 (.44*) 20.5 (.44*) Max. OpenDimensions Circuit Voltage 5.3 (.04*) 3.7 (.02*) 80 VDC 17”H x 9.875”W x 23.875”D (433 mm x 5.9 (.04*) 4.2 (.02*) 3.1 (.1*) 3.0 (.03*) 251 mm x 608 mm) 3.7 (.1*) 3.6 (.03*) 4.7 (.1*) 4.6 (.03*) KVA KW Net Weight 50 lb. (23 kg) *While idling. Syncrowave® 210 SERIES AC/DC TIG & STICK •Continuing the tradition of innovation through advanced inverter technology for light-industrial and personal users •Allows for any input voltage hook-up (120–240 V) with no manual linking, providing convenience in any job setting •Multi-voltage plug (MVP™) allows connection to 120- or 240-volt receptacles without tools. Choose the plug that fits the receptacle and connect it to the cord. •Update and expand. Front panel memory card data port provides the ability to easily update software and expand product features. •Low power draw. Inverter-based power source provides full welding output from 240 volts while drawing less than 30 amps •Pro-Set™ (TIG/Stick) eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of preset controls. •AC balance (TIG) control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds •Pulse (TIG). Pulsing can increase puddle agitation, arc stability and travel speeds while reducing heat input and distortion. Expandable feature. •DIG (Stick) control allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer, more penetrating electrodes like E6010. •Auto-Set™ (MIG) automatically sets your welder to the proper parameters. Simply set the wire size, material thickness, and shielding gas, and you’re ready to weld. (TIG/MIG complete package only.) Processes: • AC/DC TIG (GTAW) • DC Stick (SMAW) • Pulsed TIG (GTAW-P) • MIG (GMAW)* • Flux-Cored (FCAW)* *TIG/MIG Complete package only. Comes Complete with: 10 ft. power cord with MVP plugs for 120 V and 240 V, 12.5 ft. (3.8 m) Weldcraft™ A-150 TIG torch, 12-ft. (3.7 m) work cable with clamp and Dinse connector, Electrode holder with Dinse connector, RFCS-14 remote foot control, Flow gauge regulator with hose, and Factory-installed running gear with EZ-Change™ low cylinder rack TIG/MIG Complete Package Comes with Above Plus: •Spoolmate™ 100 spool gun, 4-14 pin connector, Flow-thru Dinse connector, and Memory card Part No. 907596, Runner. Part No. 300429, Wireless Remote Foot Control. Steel Welding Capability Part No. 951616, Runner TIG/MIG Complete. Part No. 301128, DC pulse Memory Card Expansion. Min - 0.020” (0.5 mm) Part No. WP-17-25-R, 25-ft. (7.6 m) Weldcraft™ A-150 TIG Torch. Part No. 301127, AC frequency Memory Card Expansion. Max - 1/4” (6.4 mm) Part No. 195142, Protective Cover. Part No. AK-150MFC, TIG Torch Accessory Kit. Allows A-150 Part No. 151086, RCC-14 Remote Control. torch customization. Converts into 28 different torch styles while Aluminum Welding Capability using existing cable. Includes collets, collet bodies, nozzles, torch Min - 0.020” (0.5 mm) heads, handle and more. Max - 1/4” (6.4 mm) Input Power 115 V 230 V Welding Process DC TIG AC TIG DC Stick DC TIG AC TIG DC Stick Welding Amp Range 5–125 A 5–125 A 20– 90 A 5– 210 A 5– 210 A 20–150 A Rated Output (R.M.S.) 95 A at 13.8 V, 60% duty cycle 90 A at 13.6 V, 60% duty cycle 70 A at 22.8 V, 60% duty cycle 125 A at 15 V, 60% duty cycle 114 A at 14.6 V, 60% duty cycle 90 A at 23.6 V, 60% duty cycle Amps Input at Rated Output 17.4 (.58*) 12.4 (.58*) 20.5 (.58*) 11.9 (.35*) 8.62 (.35*) 11.9 (.35*) Max. OpenDimensions Circuit Voltage 47 VDC 31.5”H x 18.5”W x 43”D (800 mm x 470 mm x 1,092 mm) Net Weight Runner package: 133.5 lb. (61 kg) Runner TIG/MIG Complete package: 139.5 lb. (63 kg) *While idling. Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. www.greggdistributors.ca SP04-15 MILLER® MLR/2777/2784 GTAW/TIG Welders Maxstar® 150 STL & STH DC TIG & STICK • Maximum portability and performance provided in one compact TIG/Stick package •Two models available: STL: DC TIG/Stick with Lift-Arc™ starting without the use of high frequency; STH: DC TIG/Stick with high frequency and Lift-Arc™ starting, plus built-in pulsing with a selection of four fixed-pulse frequencies •Allows for any input voltage hook-up (120–240 V) with no manual linking, providing convenience in any job setting •Multi-voltage plug (MVP™) allows connection to 120 or 240-volt receptacles without tools. Choose the plug that fits the receptacle and connect it to the power cord. •Portable with adjustable shoulder strap •Easy to transport at 13.7 pounds •Built-in gas solenoid eliminates the need for bulky torch with a gas valve Processes: •TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) w/STH model Comes Complete with: 10-ft. power cord with MVP plugs for 120 V and 240 V, 13 ft. (4 m) electrode cable with holder and 25-mm Dinse connector, and 10 ft. (3 m) work cable with clamp and 25-mm Dinse connector TIG/Stick Package Includes Above Plus: 12.5-ft. (3.8 m) Weldcraft™ A-150 TIG torch, Protective X-CASE™, Flow gauge regulator with hose, Remote fingertip control (only in packages #907135017 and #907136017), and AK2C accessory kit Part No. 300184, Protective X-CASE™. Part No. 907135, Maxstar 150 STL Machine only. Part No. 195184, RCCS-6M Remote Fingertip Control. Part No. 907135016, Maxstar 150 STL TIG/Stick package. Part No. 195183, RFCS-6M Remote Foot Control. Part No. 907135017, Maxstar 150 STL TIG/Stick package with remote fingertip control. Part No. 907136, Maxstar 150 STH Machine only. Part No. 907136017, Maxstar 150 STH TIG/Stick package with remote fingertip control. Welding Process TIG Stick Input Welding Power Amp Range 115 VAC 5–150 230 VAC 5–150 115 VAC 20–100 230 VAC 20–150 Rated Output 150 A at 16 VDC, 30% duty cycle 150 A at 16 VDC, 30% duty cycle 100 A at 24 VDC, 35% duty cycle 150 A at 26 VDC, 30% duty cycle Amps Input at Rated Output, 50/60 Hz 28.0 14.2 26.4 21.6 KVA at Duty Cycle 3.4 3.2 3.0 4.9 Max. OpenDimensions Circuit Voltage 3.1 90 VDC 9”H x 5.5”W x 13.25”D 3.1 (12 –16 VDC*) (229 mm x 140 mm x 3.0 337mm) 4.7 KW Net Weight 13.7 lb. (6.2 kg) *Sense voltage for Stick and Lift-Arc TIG. Syncrowave 250 DX & 350 LX AC/DC TIG & STICK ® •The world’s first conventional squarewave TIG power source with decades of proven performance •Squarewave output with AC balance control features adjustable cleaning action while increasing arc stability on various aluminum alloys, and helps eliminate tungsten spitting and arc rectification •120-volt auxiliary power receptacle for cooling system or small tools •Syncro Start™ technology for customized arc starts. Allows more precise arc starts and fine-tuning based on tungsten diameter and material thickness. •HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination •Dual digital meters allow for quick and easy viewing of actual and preset values of amperage and voltage •Adjustable postflow of 0 – 50 seconds protects the electrode and area near the termination of the weld •Coolmate™ 3X cooler (shown in Complete package). Three-gallon cooling system features a flow indicator to visually indicate system is working and an external filter to stop objects from entering the water-cooled torch cable. •Last procedure recall automatically recalls the last procedure setup when switching polarity •Line voltage compensation keeps power source constant regardless of fluctuations in input power (±10%) •Lift-Arc™ provides DC arc starting without the use of high frequency Processes: TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) (optional on 250 DX) • Air Carbon Arc (CAC-A) Comes Complete with*: •Two 50-mm Dinse connectors *Power cord NOT included. Complete Packages Come with*: No. 37 running gear, Coolmate™ 3X cooler, Coolant (four gallons), 25 ft. (7.6 m) water-cooled torch with Dinse connector (Syncrowave 250: Weldcraft™ W-250) (Syncrowave 350: Weldcraft™ W-375), 15 ft. (4.6 m) work cable with clamp and Dinse connector, RFCS-14 remote foot control, Flowmeter regulator with hose, Torch accessory kit with tungsten, and Cable cover *Power cord NOT included. Part No. 907195, Syncrowave 250 DX Machine only. Part No. 300429, Wireless Remote Foot Control. Part No. 300548, Pulser Module (250 DX ONLY, standard on 350 LX). For welding thin Part No. 951118, Syncrowave 250 DX Complete. Part No. 907199, Syncrowave 350 LX Machine only. materials. Provides a heating and cooling effect of the weld puddle to reduce heat input and control distortion of the material. Provides 0.25 to 10 pulses per second. Part No. 951623, Syncrowave 350 LX Complete. Part No. 300547, Sequencer Module (250 DX/350 LX). Provides a starting current higher or lower than the welding current. Provides final slope and final current for trailing the weld. Provides a spot timer for TIG spot application Welding Amp Range Syncrowave 230/460/575 V, 3–310 250 DX 50/60 Hz Syncrowave 3–400 350 LX Model No. Input Power Rated Output 200 A at 28 VAC, 60% duty cycle 250 A at 30 VAC, 40% duty cycle 300 A at 32 VAC, 60% duty cycle 350 A at 34 VAC, 40% duty cycle Mild Steel Welding Capability Model 250: Min - 0.012” (0.3 mm) Max - 1/2” (12.7 mm) Model 350: Min - 0.012” (0.3 mm) Max - 5/8” (15.9 mm) Aluminum Welding Capability Model 250: Min - 0.015” (0.4 mm) Max - 3/8” (9.5 mm) Model 350: Min - 0.015” (0.4 mm) Max - 1/2” (12.7 mm) Amps Input at Rated Output, 50/60 Hz Max. OpenDimensions* Net Weight** 230 V 460 V 575 V KVA KW Circuit Voltage 77 38 31 17.6 8.6 80 VDC 36.25”H x 22.5”W x 25”D 378 lb. (172 kg) 96 48 38 21.98 11.76 (921 mm x 572 mm x 110 55 42 25 10.6 635 mm) 496 lb. (225 kg) 128 65 50 29.5 13.7 *Add 12.75” to height with Complete package. **Add 139 pounds with Complete package. Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. SP04-16 GREGG DISTRIBUTORS LTD. MILLER® MLR/2777/2784 GTAW/TIG Welders Maxstar® & Dynasty® 200 SERIES DC (Maxstar) & AC/DC (Dynasty) TIG & STICK •Multiple models available. SD model provides basic TIG and Stick functions. DX model adds pulser and sequencer functions. LX model (Maxstar only) adds pulser and sequencer functions and an automation connection. •Allows for any input voltage hook-up (120–480 V) with no manual linking, providing convenience in any job setting •Blue Lightning™ high-frequency arc starter for more consistent non-contact starts and greater reliability compared to traditional HF arc starters •Lift-Arc™ provides AC or DC arc starting without the use of high frequency •Hot Start™ adaptive control provides positive arc starts •Auto-postflow calculates the length of postflow time based on the amperage setting. Eliminates need to independently set postflow time. •Portable with adjustable shoulder strap. Easy to transport at 37 or 45 pounds. Dynasty welders add AC TIG capabilities and the following AC features: •Waveforms for advanced squarewave, soft squarewave, sine wave and triangular wave •Balance control to provide adjustable oxide removal enabling high-quality aluminum TIG welds •Frequency to control arc cone width and improve directional control of arc Processes: • TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) except SD model • Air Carbon Arc (CAC-A) Comes Complete with: 8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, One air-cooled TIG torch connector (except Maxstar LX), and Setup DVD Contractor Packages Come with: 8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, One air-cooled TIG torch connector, Setup DVD, and Contractor kit with remote control (fingertip or foot) Complete Packages Come with: 8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, One air-cooled TIG torch connector, Setup DVD, 2-wheel trolley cart, Coolmate™ 1, Coolant (1 one-gallon bottle), Remote control (fingertip, foot or wireless foot), and Weldcraft™ W-250 (WP-20) water-cooled torch kit Dynasty 200 Part No. 907099, SD Machine only Part No. 907099011, DX Machine only Part No. 951175, DX Contractor w/fingertip Part No. 951174, DX Contractor w/foot Part No. 951140, DX Complete w/fingertip Part No. 951139, DX Complete w/foot Part No. 951397, DX Complete w/wireless foot Steel Welding Capability Min - 0.004” (0.1 mm) Max - 1/4” (6.4 mm) AC/DC Dynasty 200 DC Part No. 300480, 2-Wheel Trolley Cart. Part No. 300360, Coolmate™ 1. Part No. 043810, Coolant. Part No. 195055, Contractor Kits with RCCS-14 finger control. Part No. 195054, Contractor Kits with RFCS-14 HD foot control. Part No. 300185, Weldcraft™ W-250 (WP-20) Water-Cooled Torch Kit. Part No. 043688, RCCS-14 fingertip control. Part No. 194744, RFCS-14 HD foot control. Part No. 300429, Wireless foot control. Maxstar 200 Maxstar 200 Part No. 903701, SD Machine only. Part No. 903701011, DX Machine only. Part No. 951173, DX Contractor w/fingertip. Part No. 951172, DX Contractor w/foot. Part No. 951138, DX Complete w/fingertip. Part No. 951137, DX Complete w/foot. Part No. 951396, DX Complete w/wireless foot. Part No. 903701012, LX Machine only. Welding Input Welding Rated Output Process Power Amp Range TIG 3-phase 1–200 175 A at 17 V, 60% duty cycle 1-phase 1–200 175 A at 17 V, 60% duty cycle 1-150 (120V) 150 A at 16 V, 70% duty cycle Stick 3-phase 1–200 150 A at 26 V, 60% duty cycle 1-phase 1–200 150 A at 26 V, 60% duty cycle 1–90 125 A at 25 V, 50% duty cycle TIG 3-phase 1–200 150 A at 16 V, 60% duty cycle 1-phase 1–200 150 A at 16 V, 60% duty cycle 1–150 140 A at 16 V, 40% duty cycle Stick 3-phase 1–200 130 A at 25 V, 60% duty cycle 1-phase 1–200 130 A at 25 V, 60% duty cycle 1–105 100 A at 24 V, 60% duty cycle Aluminum Welding Capability (Dynasty Only) Min - 0.020” (0.5 mm) Max - 1/4” (6.4 mm) Amps Input at Rated Load Output, 50/60 Hz Max. Open115 V 230 V 400 V 460 V KVA KW Circuit Voltage — 11 6 5 4.2 4.0 80 VDC — 17 — — 4.0 4.0 (9–14*) 30 14 — — 3.4 3.4 — 13 7 6 5.2 5.0 — 22 — — 5.0 5.0 34 — — — 4.0 3.8 — 10 6 5 3.8 3.6 80 VDC — 16 — 8 3.6 3.6 (5–10 VDC*) 31 — — — 3.6 3.5 — 13 8 6 4.8 4.6 — 20 — 10 4.7 4.7 31.3 — — — 3.6 3.6 Machine Only Dimensions Machine Only Net Weight 13.5”H x 7.5”W x 17.5”D 37 lb. (16.8 kg) (343 mm x 191 mm x 445 mm) 13.5”H x 7.5”W x 21.5”D 45 lb. (20.5 kg) (343 mm x 191 mm x 546 mm) Note: Duty cycle is limited on 120 V power. Coolmate 1 must be plugged into a 120 V source (wall). *Sense voltage for Low OCV Stick and Lift-Arc™ TIG. www.greggdistributors.ca SP04-17 MILLER® MLR/2777/2784 GTAW/TIG Welders Maxstar is DC only. •Base and DX models available. Base model provides essential TIG and Stick functions. DX model adds extended ranges to sequencer, full trigger options, and full preflow and pulser functions. •Allows for any input voltage hook-up (208–575 V) with no manual linking, providing convenience in any job setting •Blue Lightning™ high-frequency arc starter for more consistent non-contact starts and greater reliability compared to traditional HF arc starters •Lift-Arc™ provides AC or DC arc starting without the use of high frequency •Hot Start™ adaptive control provides positive arc starts •Auto-postflow calculates the length of postflow time based on the amperage setting. Eliminates need to independently set postflow time. •Pro-Set™ provides the speed, convenience and confidence of preset parameters for balance, frequency, pulse and DIG •Sleep timer conserves energy by powering down system if left idle for a user-adjustable amount of time •Memory card port for easy software updates and expansions •Optional Cooler Power Supply (CPS) is an integrated 120-volt dedicated-use receptacle to power the Coolmate™ 1.3. The power switch on the power source also activates the receptacle to help prevent torch failure. Dynasty welders add AC TIG capabilities and the following AC features (limited on base model): •Waveforms for advanced squarewave, soft squarewave, sine wave and triangular wave •Balance control to provide adjustable oxide removal enabling high-quality aluminum TIG welds •Frequency to control arc cone width and improve directional control of arc Processes: Steel Welding Capability Aluminum Welding Capability •TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) • Air Carbon Arc (CAC-A) Min - 0.004” (0.1 mm) (Dynasty Only) Comes Complete with: Max - 3/8” (9.5 mm) Min - 0.012” (0.3 mm) 8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, and Quick reference guide (Dynasty 280 model only) Max - 3/8” (9.5 mm) Complete Packages Come with: 8 ft. (2.4 m) power cord (no plug), Quick reference guide (Dynasty 280 model only), Small Runner™ cart, Coolmate™ 1.3, Coolant (4 one-gallon bottles), Remote control (foot or wireless foot), and Weldcraft™ W-280 (WP-280) water-cooled torch kit Maxstar® & Dynasty® 280 Series DC (Maxstar) & AC/DC (Dynasty) TIG & STICK Maxstar 280 Part No. 907552, Base Machine only. Part No. 907538, Base Machine only with CPS. Part No. 907553, DX Machine only Part No. 907539, DX Machine only with CPS Dynasty 280 AC/DC DC Maxstar 280 Dynasty 280 Part No. 907550, Base Machine only. Part No. 907537, Base Machine only with CPS. Part No. 951466, Base Complete with foot and CPS. Part No. 907551, DX Machine only. Part No. 907514, DX Machine only with CPS. Part No. 951468, DX Complete with foot and CPS. Part No. 951469, DX Complete with wireless foot and CPS. Welding Process TIG Stick TIG Stick Input Welding Power Amp Range 3-phase 1–280 1-phase 3-phase 5–280 1-phase 3-phase 1–280 (DC) 1-phase 2–280 (AC) 3-phase 5–280 1-phase Part No. 300988, Small Runner™ Cart. Part No. 300972, Coolmate™ 1.3. Part No. 043810, Coolant. Part No. 195055, Contractor Kit with RCCS-14 finger control. Part No. 195054, Contractor Kit with RFCS-14 HD foot control. Part No. 300185, W-250 (WP-20) Weldcraft™ Water-Cooled Torch Kit. Part No. 300990, W-280 (WP-280) Weldcraft™ Water-Cooled Torch Kit. Part No. 301268, W-375 Weldcraft™ Water-Cooled Torch Kit. Part No. 043688, RCCS-14 fingertip control. Part No. 194744, RFCS-14 HD foot control. Part No. 300429, Wireless foot control. Rated Output 235 A at 19.4 V, 60% duty cycle 235 A at 19.4 V, 60% duty cycle* 200 A at 28 V, 60% duty cycle 180 A at 27.2 V, 60% duty cycle* 235 A at 19.4 V, 60% duty cycle 235 A at 19.4 V, 60% duty cycle* 200 A at 28 V, 60% duty cycle 180 A at 27.2 V, 60% duty cycle* Amps Input at Rated Load Output, 50/60 Hz Max. OpenMachine Only Dimensions 208 V 230 V 400 V 460 V 575 V KVA KW Circuit Voltage 17 15 9 7 6 6.2 6.0 60 VDC 13.6”H x 8.6”W x 22.5”D 28 26 15 13 10 6.0 6.0 (11 VDC**) (346 mm x 219 mm x 20 18 10 9 7 7.2 7.0 569 mm) 30 27 15 13 10 6.2 6.2 60 VDC 19 17 10 9 7 7.0 6.7 (11 VDC**) 33 30 17 15 12 6.9 6.8 22 20 11 10 8 8.2 7.9 34 31 17 15 12 7.1 7.0 Machine Only Net Weight 47 lb. (21.3 kg) 50 lb. (22.7 kg) with CPS 52 lb. (23.6 kg) 55 lb. (25 kg) with CPS *Refer to owner’s manual for 208 V output ratings and duty cycle. **Sense voltage for Low OCV Stick and Lift-Arc™ TIG. Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. SP04-18 GREGG DISTRIBUTORS LTD. MILLER® MLR/2777/2784 GTAW/TIG Welders Maxstar & Dynasty 350 & 700 DC (Maxstar) & AC/DC (Dynasty) TIG & STICK ® ® AC/DC DC •Allows for any input voltage hook-up (208–575 V) with no manual linking, providing convenience in any job setting •Blue Lightning™ high-frequency arc starter for more consistent non-contact starts and greater reliability compared to traditional HF arc starters •LiftArc™ provides AC or DC arc starting without the use of high frequency •Hot Start™ adaptive control provides positive arc starts •Auto-postflow calculates the length of postflow time based on the amperage setting. Eliminates need to independently set postflow time. •120-volt auxiliary power dual receptacle to power cooling system or small tools •Program memory features nine program memories that maintain/save your parameters •High-speed DC TIG pulse controls capable of 5000 pulses per second Dynasty welders add AC TIG capabilities and the following AC features: •Waveforms for advanced squarewave, soft squarewave, sine wave and triangular wave •Balance control to provide adjustable oxide removal enabling high-quality aluminum TIG welds •Frequency to control arc cone width and improve directional control of arc •AC amplitude/amperage allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode Processes: •TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) • Air Carbon Arc (CAC-A) 350 Models Come with: 8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors (350), and Setup video and reference guide 700 Models Come with (Power cord NOT included): Thread-lock torch connector, Two thread-lock weld cable connectors, and Setup video and reference guide Complete Packages Come with Above Plus: Runner™ cart, Coolmate™ 3.5, Coolant (4 one-gallon bottles), Remote control (foot or wireless foot), and Weldcraft™ water-cooled torch kit (350: W-375, 700: W-400) Part No. 907334, Maxstar 350, Machine only. Part No. 300244, Runner™ Cart. Part No. 951624, Maxstar 350, Complete with foot. Part No. 300245, Coolmate™ 3.5. Part No. 951625, Maxstar 350 ,Complete with wireless foot. Part No. 043810, Coolant. Part No. 907103, Maxstar 700, Machine only. Part No. 300185, W-250 (WP-20) Weldcraft™ Water-Cooled Torch Kits. Part No. 907204, Dynasty 350, Machine only. Part No. 301268, W-375 Weldcraft™ Water-Cooled Torch Kits. Part No. 951626, Dynasty 350, Complete with foot. Part No. 300186, W-400 (WP-18SC) Weldcraft™ Water-Cooled Torch Kits. Part No. 951627, Dynasty 350, Complete with wireless foot. Part No. 043688, RCCS-14 fingertip control. Part No. 907101, Dynasty 700, Machine only. Part No. 194744, RFCS-14 HD foot control. Part No. 951403, Dynasty 700, Complete with foot. Part No. 300429, Wireless foot control. Part No. 951404, Dynasty 700, Complete with wireless foot. Model No. Maxstar 350 Input Welding Rated Output Power Amp Range 3-phase 3–350 300 A at 32 V, 60% duty cycle 1-phase 3–350 225 A at 29 V, 60% duty cycle Maxstar 700 3-phase 1-phase 5–700 5–700 600 A at 44 V, 60% duty cycle 450 A at 38 V, 60% duty cycle Dynasty 350 3-phase 1-phase 3–350 3–350 300 A at 32 V, 60% duty cycle 225 A at 29 V, 60% duty cycle Dynasty 700 3-phase 1-phase 5–700 5–700 600 A at 44 V, 60% duty cycle 450 A at 38 V, 60% duty cycle Maxstar is DC only. Mild Steel Welding Capability Model 350: Min - 0.012” (0.3 mm) Max - 5/8” (15.9 mm) Model 700: Min - 0.020” (0.5 mm) Max - 1” (25.4 mm) Aluminum Welding Capability (Dynasty Only) Model 350: Min - 0.015” (0.4 mm) Max - 5/8” (15.9 mm) Model 700: Min - 0.020” (0.5 mm) Max - 1” (25.4 mm) Amps Input at Rated Load Output, 50/60 Hz Max. OpenMachine Only Dimensions 208 V 230 V 400 V 460 V 575 V KVA KW Circuit Voltage 24.75”H x 13.75”W x 75 VDC 33 30 17 15 12 12.0 11.5 41 37 — 19 15 8.6 8.2 (10 –15 VDC*) 22”D (629 mm x 349 mm x 559 mm) 34.5”H x 13.75”W x 22”D 89 80 46 40 32 32 31 75 VDC 106 96 — 48 38 22 21 (10 –15 VDC*) (876 mm x 349 mm x 559 mm) 24.75”H x 13.75”W x 60 VDC 35 32 16 16 13 12.7 12.1 (11 VDC*) 22”D (629 mm x 349 mm 47 43 — 21 17 9.8 9.1 x 559 mm) 75 VDC 34.5”H x 13.75”W x 22”D 97 88 51 44 35 35 34 115 104 — 52 42 24 22 (10 –15 VDC*) (876 mm x 349 mm x 559 mm) Machine Only Net Weight 135 lb. (61 kg) 198 lb. (90 kg) 135 lb. (61 kg) 198 lb. (90 kg) *Sense voltage for Low OCV Stick and Lift-Arc™ TIG. Weldcraft™ Tungsten Tungsten for the most demanding TIG welding applications! Available in four types and industry-standard diameters, the line of Weldcraft tungsten electrodes has under gone rigorous testing to ensure the highest quality and durability. Colour-coded packages include ten 7” (175 mm) tungsten electrodes. 2% Ceriated (EWCe-2) Performs well in DC welding and arc starting at low-current settings, and offers excellent performance in AC processes. Part No. WC040X7, 0.040” (1.0 mm). Part No. WC116X7, 1/16” (1.6 mm). Part No. WC332X7, 3/32” (2.4 mm). Part No. WC018X7, 1/8” (3.2 mm). Part No. WC532X7, 5/32” (4.0 mm). 2% Lanthanated (EWLa-2) Provides excellent arc starting, arc stability and re-ignition, and less tip erosion in AC or DC welding. Can substitute for 2% Thoriated. Part No. WL2040X7, 0.040” (1.0 mm). Part No. WL2116X7, 1/16” (1.6 mm). Part No. WL2332X7, 3/32” (2.4 mm). Part No. WL2018X7, 1/8” (3.2 mm). Part No. WL2532X7, 5/32” (4.0 mm). Pure (EWP) Forms a clean, balled end when heated and provides good arc stability for AC welding with a balanced or unbalanced squarewave or sine wave. Part No. WP116X7, 1/16” (1.6 mm). Part No. WP332X7, 3/32” (2.4 mm). Part No. WP018X7, 1/8” (3.2 mm). Rare Earth (EWG) Combines the best of all alloying elements, and provides excellent arc stability in AC or DC welding. Part No. WG116X7, 1/16” (1.6 mm). Part No. WG332X7, 3/32” (2.4 mm). Part No. WG018X7, 1/8” (3.2 mm). www.greggdistributors.ca SP04-19 MILLER® MLR/2784 Weldcraft™ TIG Torches Synonymous with versatility and performance, Weldcraft TIG torches can handle the most intricate to the most demanding TIG welding challenges. From 125-amp hand-held MicroTIG® torches to 900-amp machine-held water-cooled models, there’s a Weldcraft torch for nearly every TIG application. Weldcraft™ A-125 SERIES TORCHES - AIR-COOLED •Air-cooled torches designed for optimal control while welding thin-gauge materials, especially in hard-to-reach places •The lightweight body reduces fatigue and downtime, and increases operator comfort •Perfected control. The gas valve in the A-125 Valve offers improved shielding gas control. •Flexibility. Using the A-125 Flex, the flexible neck easily adjusts to any angle for improved torch control. •The pencil-style model without a back cap allows for superior access to confined areas (A-125 Pencil) •Combine the flexible neck and gas valve for welding limited-access joints using power sources without gas solenoids (A-125 Flex Valve) Model A-125 A-125 Valve A-125 Flex A-125 Flex Valve A-125 Pencil Rubber Part No. 12.5 ft. (3.8 m) WP-9-12-R WP-9V-12-R WP-9F-12-R WP-9FV-12-R WP-9P-12-R 25 ft. (7.6 m) WP-9-25-R WP-9V-25-R WP-9F-25-R WP-9FV-25-R WP-9P-25-R A-125 2-Piece Rubber Part No. 12.5 ft. (3.8 m) — WP-9V-12-2 — WP-9FV-12-2 — 25 ft. (7.6 m) — WP-9V-25-2 — WP-9FV-25-2 — Rated Output DC: 125 A at 60% duty cycle AC: 100 A at 60% duty cycle Electrode Range .020 – 1/8” (0.5 – 3.2 mm) Weldcraft™ A-150 SERIES TORCHES - AIR-COOLED •Versatile and innovative air-cooled torches designed for maximum comfort in a variety of applications •Diamond Grip™ head design (A-150 and A-150 Valve) has ergonomic contact points for thumb and fingers. Provides a more comfortable grip and reduces operator fatigue. •Improve control and comfort with the A-150 Flex and the flexible neck that allows access into hard-to-reach areas •Maximum versatility. Utilize the Redhead Series torches in a variety of welding applications without adding expenses. •Ribbed handle and torch design provide cool operation and maximum operator comfort while reducing downtime caused by operator fatigue •Available with 12.5 or 25 ft., single or heavy-duty two-piece cable assembly determined by the compatibility of the power source. Heavy-duty cable assembly allows use of a larger conductor for the power cable which simplifies repair and replacement making it ideal for field applications. Rated Output DC: 150 A at 60% duty cycle AC: 115 A at 60% duty cycle Electrode Range .020 –1/8” (0.5 – 3.2 mm) Rubber Part No. Model Mono-Flex™ Rubber Part No. 12.5 ft. (3.8 m) 25 ft. (7.6 m) A-150 WP-17-12-R WP-17-25-R A-150 Valve WP-17V-12-R WP-17V-25-R A-150 Flex WP-17F-12-R WP-17F-25-R A-150 Flex Valve WP-17FV-12-R WP-17FV-25-R WP-R17FV-25-R A-150 Flex Valve Redhead™ WP-R17FV-12-R A-150 PSH* — WP-17-25-R-PSH A-150 Valve PSH* WP-17V-12-R-PSH WP-17V-25-R-PSH 12.5 ft. (3.8 m) WP-17-12-MF — — — — — — 25 ft. (7.6 m) WP-17-25-MF WP-17V-25-MF — — — — — Part No. 10N23, 1/16” (1.6 mm) Collet. Part No. 10N24, 3/32” (2.4 mm) Collet. Part No. 10N25, 1/8” (3.2 mm) Collet. Part No. 10N31, 1/16” (1.6 mm) Collet Body. Part No. 10N32, 3/32”(2.4 mm) Collet Body. Part No. 10N28, 1/8” (3.2 mm) Collet Body. Part No. 10N48, #6, 3/8” Alumina Nozzle. Part No. 10N47, #7, 7/16” Alumina Nozzle. A-150 Valve PSH Part No. 10N46, #8, 1/2” Alumina Nozzle. Part No. AK-150MFC, Accessory Kit. Allows A-150 torch customization. Converts into 28 different torch styles while using existing cable. Includes collets, collet bodies, nozzles, torch heads, handle and more. Mono-Flex™ Rubber Part No. 25 ft. (7.6 m) WP-17-25-2 WP-17V-25-2 WP-17F-25-2 WP-17FV-25-2 — — — Weldcraft™ A-200 SERIES TORCHES - AIR-COOLED Model A-200 A-200 Valve A-200 Flex A-200 Flex Valve Rubber Part No. 12.5 ft. (3.8 m) WP-26-12-R WP-26V-12-R — WP-26FV-12-R SP04-20 GREGG DISTRIBUTORS LTD. Weldcraft™ A-200 SERIES CONSUMABLES A-200 Flex Valve 2-Piece Rubber Part No. 25 ft. (7.6 m) 25 ft. (7.6 m) WP-26-25-R WP-26-25-2 WP-26V-25-R WP-26V-25-2 WP-26F-25-RWP-26F-25-2 WP-26FV-25-R WP-26FV-25-2 Part No. 13N22, 1/16” (1.6 mm) Collet. Part No. 13N23, 3/32” (2.4 mm) Collet. Part No. 13N24, 1/8” (3.2 mm) Collet. Part No. 13N27, 1/16” (1.6 mm) Collet Body. Part No. 13N28, 3/32” (2.4 mm) Collet Body. Part No. 13N29, 1/8” (3.2 mm) Collet Body. Part No. 13N10, #6, 3/8” Alumina Nozzle. Part No. 13N11, #7, 7/16” Alumina Nozzle. Part No. 13N12, #8, 1/2” Alumina Nozzle. Part No. AK1C, Accessory Kit. Includes one long back cap, one of each size (#4, #5, #6) alumina nozzle, and one of each size (.040, 1/16”) of the following: collet, collet body, and 7” 2% ceriated tungsten electrode. Weldcraft™ A-150 SERIES CONSUMABLES 12.5 ft. (3.8 m) WP-17-12-2 WP-17V-12-2 WP-17F-12-2 WP-17FV-12-2 — WP-17-12-2-PSH — •Dependable, top-performing air-cooled torches designed for heavy-duty welding applications •Eliminate the expense of a water-cooled system. The air-cooled capability pairs reliability with cost-effectiveness for all field applications. •Robust performance. The heavy copper construction delivers maximum welding capacity for rugged fieldwork. •Effortless adjustments. The A-200 Valve provides a gas control valve to ensure a quick, easy adjustment of shielding gas flow. •Flexibility. Using the A-200 Flex, the flexible neck easily adjusts to any angle for better torch control in limited-access joints. •Combining the flexible neck and gas valve advances capabilities with greater comfort and control (A-200 Flex Valve) Weldcraft™ A-125 SERIES CONSUMABLES Rated Output DC: 200 A at 60% duty cycle AC: 150 A at 60% duty cycle Electrode Range .020 – 5/32” (0.5 – 4.0 mm) Part No. 10N23, 1/16” (1.6 mm) Collet. Part No. 10N24, 3/32” (2.4 mm) Collet. Part No. 10N25, 1/8” (3.2 mm) Collet. Part No. 10N31, 1/16” (1.6 mm) Collet Body. Part No. 10N32, 3/32” (2.4 mm) Collet Body. Part No. 10N28, 1/8” (3.2 mm) Collet Body. Part No. 10N47, #7, 7/16” Alumina Nozzle. Part No. 10N46, #8, 1/2” Alumina Nozzle. Part No. 10N45, #10, 5/8” Alumina Nozzle. Part No. AK3C, Accessory Kit. Includes one short back cap, one of each size (#5, #6, #8) alumina nozzle, and one of each size (1/16, 3/32, 1/8”) of the following: collet, collet body, and 7” 2% ceriated tungsten electrode. MILLER® MLR/2778/2784 Engine-Driven Welders Bobcat™ SERIES - GAS, LP & DIESEL •The Bobcat engine-driven welder/generators have been the top-selling in their class because they are engineered to be reliable, powerful and durable from the start. •Quieter and better sound. Gas models deliver significant improvements in sound level and quality for better jobsite communication and a safer, more efficient working environment. By rotating the engine toward the front we created a more efficient airflow, resulting in significantly quieter operation. You can start jobs earlier, end later, and work around noise-sensitive areas. •Smaller and lighter design. Bobcat welder/generators take up less space on trucks and trailers — leaving more room for other equipment and tools. Plus, they’re easier to move around jobsites— even with weld cables and running gear attached. • Easier maintenance. Easy-to-read front panel maintenance displays show when your equipment needs to be serviced. With the intuitive design, the daily maintenance is fast and easy: •Oil checks from the top by the front panel •Toolless panels that allow for quick access •Single-side fuel fill and oil drain/filter •Optional Electronic Fuel Injection (EFI). Available on the Bobcat 250 gas model only. Use up to 27 percent less fuel, saving money and improving your bottom line. •Smooth power. Better power means better performance. Our Bobcat welder/ generators have smoother power — not the spiked power found with other brands — because of: •Revolutionary ten-degree skewed-rotor design •Optimized generator performance •Accu-Rated™– not inflated generator power. Our Accu-Rated peak power is usable for maximum generator loads, including plasma cutters, wire welders and motor starting. It also beats the competition’s very short-duration peak or surge power. Accu-Rated power delivers: •11,000 watts (12,000 on Bobcat 250 with EFI) of usable peak power •Peak power delivered for a minimum of 30 seconds •Large 12-gallon fuel capacity means many hours of run time before refueling. •Versatile AC and DC weld output provides quality welds on all types of metals. DC is smooth and easy to run while AC Stick is used when arc blow occurs. •Maintenance displays show engine hours and hours left before an oil change is due. •Heavy-duty construction. All internal components are designed to handle the harshest environments and will run better and last longer. Processes: •AC/DC Stick (SMAW) • MIG (GMAW)1 • Flux-Cored (FCAW)1 •AC2/DC TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A)3 (rated 3/16”. carbons) 1 With voltage-sensing feeder only. Please see pg. SP04-02 for more information 2 With Dynasty® 200 Series or HF-251 (non-critical). Part No. 300517, Full KVA Adapter Cord. about the Miller Welding icons and symbols. 3 Bobcat 250 models only. Part No. 300975, GFCI Panel Mount 120 VAC Duplex Kit. Engines: Part No. 300976, Electric Fuel Pump Kit (gas models only). Gas—Kohler CH730: 23.5 HP at 3600 RPM. Part No. 300924, Spark Arrestor Kit (gas models only). EFI Gas—Kohler ECH730: 23 HP at 3600 RPM. LP—Kohler CH730 (Liquid withdrawal LP system): 21 HP at 3600 RPM. V-twin-cylinder, four-cycle, overhead valve, industrial, air-cooled. EPA Tier 4 compliant! Diesel—Kubota D722: 19 HP at 3600 RPM. Three-cylinder, industrial, liquid-cooled. Bobcat™ 225 (Gas) •Cost-effective, multiprocess machine primarily used for Stick welding. Great for farm, ranch, maintenance/repair operations and as a stand-alone generator. Bobcat™ 3 Phase (Gas) •Designed for farm and ranch owners in need of single and three-phase power to run 480 V three-phase pivot irrigation systems or to provide backup power for home, farm and ranch. Bobcat™ 250 (Gas, LP or Diesel) •Rugged multipurpose engine drives are ideal for mobile maintenance trucks where reduced size and weight are essential. They are great for Stick and Flux-Cored welding, Carbon Arc gouging, and are designed to handle maintenance/repair, construction, farm/ranch, and generator use. •Front panel fuel gauge provides convenient fuel level indication. •Smoother weld output and better generator power while welding. •More weld output than 225-amp welder generators for more versatility. 72%more power for MIG/FCAW, 67% more for AC welding, and 11% more for DC Stick. EFI GAS ENGINE Electronic fuel injection (EFI) gas engines optimize the air/fuel ratio for all engine speeds and engine loads, resulting in lower operational costs, fewer emissions, longer runtimes and better performance when compared to carbureted models. The payback from fuel savings alone is a matter of months. EFI advantages (vs. carburetor models): •12,000 watts of generator power •Up to 27% better fuel efficiency •Extended runtimes up to 27% •Fast, easy starts in all climates •Reliable operation, even with infrequent use •Fewer emissions — 27% less CO and 33% lower HC+NOx levels Welding Amp/Volt Process Rated Output at 104° F (40° C) Mode Ranges Bobcat 907498001 Kohler CC/AC Stick/TIG 70–150 A 150 A at 25 V, 100% duty cycle 225 907498 Kohler with GFCI CC/DC Stick/TIG 50– 225 A 225 A at 25 V, 100% duty cycle CV/DC MIG/FCAW 19– 28 V 200 A at 20 V, 100% duty cycle Bobcat 907505 Kohler with GFCI CC/AC Stick/TIG 50– 200 A 200 A at 25 V, 100% duty cycle 3 Phase CC/DC Stick/TIG 50– 210 A 210 A at 25 V, 100% duty cycle CV/DC MIG/FCAW 19– 28 V 200 A at 20 V, 100% duty cycle Bobcat 907500001 Kohler CC/AC Stick/TIG 40– 250 A 250 A at 25 V, 60% duty cycle 907500 Kohler with GFCI 40– 275 A w/EFI 225 A at 25 V, 100% duty cycle 250 907500002 Kohler with electric fuel pump* CC/DC Stick/TIG 40– 250 A 250 A at 25 V, 100% duty cycle 907502 EFI Kohler 40– 275 A w/EFI 907504 LP Kohler with GFCI CV/DC MIG/FCAW 17– 28 V 275 A at 25 V, 60% duty cycle 250 A at 25 V, 100% duty cycle 907565 Kubota with GFCI CC/AC Stick/TIG 40– 275 A 250 A at 25 V, 100% duty cycle Bobcat 250 CC/DC Diesel CV/DC MIG/FCAW 17– 28 V 275 A at 25 V, 60% duty cycle 250 A at 28 V, 100% duty cycle Diesel Gas or LP Gasoline Model Part No. Features Net Weight Generator Power at Dimensions 104° F (40° C) Single-phase 28”H (711 mm) Peak: 11,000 watts 32.75”H (832 mm) to Continuous: 9500 watts top of exhaust Single-phase/Three-phase 20”W (508 mm) Peak: 11,000 watts 40.5”D (1,029 mm) Continuous: 9500 485 lb. (220 kg) Single-phase Peak: 11,000 watts Continuous: 9500 watts EFI Model Peak: 12,000 watts Continuous: 10,500 watts 501 lb. (227 kg) watts/10,000 watts Single-phase Peak: 11,000 watts Continuous: 9500 watts 28”H (711 mm) 32.75”H (832 mm) to top of exhaust 20”W (508 mm) 40.5”D (1,029 mm) 495 lb. (225 kg) 28”H (711 mm) 638 lb. 32.375”H (873 mm) (289 kg) to top of exhaust 20”W (508 mm) 45.375”D (1,153 mm) *Recommended for operation at altitudes above 5,000 ft. www.greggdistributors.ca SP04-21 MILLER® MLR/2778/2784 Engine-Driven Welders Trailblazer® SERIES - GAS, LP & DIESEL •The Trailblazer welder/generators deliver unbeatable arc performance, the smoothest, most stable arc in the industry and an independent welder and generator power system. •Long runtimes - Stop less for refueling and get more work done. •Fuel efficient - Save money and improve your bottom line. •User friendly - Easy-to-read front panel maintenance displays show when your equipment needs to be serviced. With the intuitive design, the daily maintenance is fast and easy: •Oil checks from the top by the front panel •Sunvision™ technology that provides easy-to-read digital meter •Toolless panels that allow for quick access •Single-side fuel fill and oil drain/filter •Quiet - Low sound output — so you can work earlier, later, and around noise-sensitive areas. Up to 68% quieter with the gas models and up to 40% quieter with the diesel model. •Smart-Cor™ technology - A lighter Trailblazer that takes up less space. •Arc performance - Three Stick modes — EXX18, EXX10 and Gouge •Two Wire modes — Solid and Flux-Core •Three Lift-Arc™ TIG modes — Auto-Stop™, Auto-Crater™ and Pulse •Self-calibrating digital weld meters with maintenance displays - Preset and actual weld amperage/voltage •Process settings •Fuel gauge •Hour meter function and oil change interval •Engine speed (RPM) •Accu-Rated™– not inflated generator power - The Accu-Rated peak power is usable for maximum generator loads, including plasma cutters, wire welders and motor starting. It also beats the competition’s very short-duration peak or surge power. Accu-Rated power delivers: •12,000 watts of usable peak power •Peak power delivered for a minimum of 30 seconds •Large 12-gallon fuel capacity - means many hours of run time before refueling. •Heavy-duty construction - All internal components are designed to handle the harshest environments and will run better and last longer. Processes: •Stick (SMAW) • MIG (GMAW)1 • Flux-Cored (FCAW)1 • DC TIG/Pulsed TIG (GTAW/GTAW-P)2 • Air Carbon Arc Cutting and Gouging (CAC-A) (rated 3/16” carbons, capable 1/4” carbons)3 1 With wire feeder. 2 Two-piece TIG torch recommended. 3 Trailblazer 325 model only. Engines: Gas—Kohler CH730: 23.5 HP at 3600 RPM. EFI Gas—Kohler ECH730: 23 HP at 3600 RPM. LP—Kohler CH730 (Liquid withdrawal LP system): 21 HP at 3600 RPM. V-twin-cylinder, four-cycle, overhead valve, industrial, air-cooled. EPA Tier 4 compliant! Diesel—Kubota D902: 24.8 HP at 3600 RPM. Three-cylinder, industrial, liquid-cooled. Base Model Exclusive Technologies Smart-Cor™ technology. Independent weld and generator power in an improved, more compact design. Benefits it provides: •No interaction between jobsite tools and the welding arc •Stronger, cleaner, more efficient generator power •Reduced size and weight •Improved arc performance Auto-Speed™ technology. Automatically adjusts the engine speed to run at lower speeds depending on the total power needed. Benefits it provides: •Exceptional fuel efficiency •Extended runtimes •Quieter operation •Reduced emissions Innovative design. Engine is rotated to the front in the gas model to create more efficient airflow. Benefits it provides: •Quieter operation •Reduced size and weight •Easier maintenance Options To Maximize Your Trailblazer 325 Performance Excel Power Excel power improves generator performance by providing 120-volt, 60 hertz of pure sine wave generator power at idle speed and while welding. When connected to the Excel power receptacle, you get up to 2400 watts of the cleanest generator power available. Plus you can run most jobsite tools — like lights, drills, grinders and chop saws—at idle speed, which provides: •Exceptional fuel efficiency •Extended runtimes •Quieter operation Longer engine life Diesel Gasoline Gas or LP Model Part No. Features Trailblazer 907506 Kohler with GFCI 275 907509 LP Kohler with GFCI Trailblazer 907510001 325 907510 907510002 907512 907512001 907512002 Trailblazer 907566001 325 Diesel 907566 907566002 Kohler Kohler with GFCI Kohler w/electric fuel pump EFI Kohler EFI Kohler with Excel power EFI Kohler with Excel power and battery charge/jump start Kubota Kubota with GFCI Kubota with Excel power Part No. 130831, Spoolmatic® 30A Control Part No. 137549, WC-24 Control Part No. 300517, Full KVA Adapter Cord (pg 103) Part No. 300976, Electric Fuel Pump Kit* (gas models only) SP04-22 GREGG DISTRIBUTORS LTD. EFI (Gas Models) Electronic fuel injection (EFI) maximizes performance by optimizing the air/fuel ratio for all engine speeds and loads. Choose EFI for: •Up to 27% better fuel economy •Extended runtimes up to 27% •Fast, easy starts in all climates •Reliable operation, even with infrequent use •Fewer emissions — 27% less CO and 33% lower HC+NOx levels Welding Mode CC/DC Battery Charge/Jump Start (Gas Models) Reduce downtime with battery charge/jump start capability. Designed and recommended for mechanics or anyone else responsible for a fleet of trucks or equipment. By using your Trailblazer to charge dead batteries or jump a stubborn engine, you’ll keep your crew working and the fleet up and running. Amp/Volt Ranges 10– 275 A 275 A at 28 V, 100% duty cycle CV/DC MIG/FCAW 10– 35 V 275 A at 28 V, 100% duty cycle CC/DC 10– 325 A 325 A at 28 V, 100% duty cycle CV/DC MIG/FCAW 10– 35 V 325 A at 28 V, 100% duty cycle CC/DC 10– 325 A 325 A at 33 V, 100% duty cycle 10– 35 V 325 A at 33 V, 100% duty cycle Process Stick/TIG Stick/TIG Stick/TIG CV/DC MIG/FCAW Rated Output at 104° F (40° C) Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. Single-Phase Generator Power at 104° F (40° C) Peak: 12,000 watts 11,000 watts (LP) Continuous: 10,500 watts 9500 watts (LP) Excel Power (optional) 2400 watts 20 A at 120 V, 60 Hz pure generator power at idle speed and while welding. Dimensions 28”H (711 mm) 32.75”H (832 mm) to top of exhaust 20”W (508 mm) 40.5”D (1,029 mm) 28”H (711 mm) 32.75”H (832 mm) to top of exhaust 20”W (508 mm) 40.5”D (1,029 mm) Net Weight 459 lb. (208 kg) 460 lb. (209 kg) 28”H (711 mm) 34.375”H (873 mm) to top 620 lb. of exhaust (281 kg) 20”W (508 mm) 45.375”D (1,153 mm) MILLER® MLR/2778/2784 Engine-Driven Welders Blue Star 185 - GASOLINE ® •Reliable outdoor portable power! Great for farm, ranch, maintenance, construction and hobbyist •Compact and portable, its small footprint uses little truck space •Optional running gear also makes the Blue Star one-man portable •Stick and TIG capable •Accu-Rated™ peak generator power is usable for maximum generator loads such as plasma cutting, Millermatic® MIG welders and motor starting •Includes electric start, 120 VAC GFCI and 240 VAC receptacles, 6.25-gallon fuel capacity, auto-idle and engine hour meter Processes: • Stick (SMAW) • TIG (GTAW) Engine: Gasoline engine - Kohler CH440: 13.4 HP at 3600 RPM. One-cylinder, four-cycle, OHV, air-cooled Part No. 907664, Blue Star® 185. Part No. 195353, Lifting Eye. Part No. 301246, Running Gear. Part No. 301245, Protective Cover. Welding Welding Amperage Single-Phase Generator Dimensions Net Weight Rated Output Mode Process Range Power at 104° F (40° C) 24.75”H x 20.625”W x 31.25”D 296 lb. (134 kg) CC/DC DC Stick/TIG 60–195 185 A at 25 V, 20% duty cycle Peak: 6500 watts 150 A at 25 V, 100% duty cycle Continuous: 6200 watts (629 mm x 524 mm x 794 mm) Trailblazer® 302 Air Pak™ - GASOLINE •Powerful all-in-one tool designed for repair and construction with multiprocess weld quality, generator power, air compressor and battery charge/jump start •Superior arc performance. Preset dig settings optimized for the majority of Stick welding applications, best-in-class Wire arc performance, and two Lift-Arc™ TIG modes for most DC TIG applications •Strongest combined generator/ compressor power. Delivers an industry-leading 13,000 watts of peak generator power independent of weld settings — can power a Spectrum® 875 plasma cutter, and provide air for plasma cutting at the same time (rated 5/8” mild steel). •Rotary screw air compressor. Delivers up to 31 CFM and 160 PSI of air with no storage tank. Gives 100% deliverable air and runs many tools at idle speed. Air outputs are rated at an industry-high 40°C (104°F). Front panel air pressure adjustment and automatic overpressure shutdown with indication. Designed for more than 30,000 hours of operation and warranted for three years by Miller. •Battery charge/jump start. Provides selectable 12 or 24-volt battery charging capability with up to 450 amps of battery jump-starting capability. Convenient front panel battery charger/jump starter access. Processes: • AC/DC Stick (SMAW) • MIG (GMAW)1 • Flux-Cored (FCAW)1 •AC2/DC3 TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (rated 3/16” carbons, capable 1/4” carbons) 1 With wire feeder. 2 With Dynasty® 200 Series or HF-251 (non-critical). 3 Two-piece TIG torch recommended. Engine: Gasoline - Kohler CH750: 27 HP at 3600 RPM. V-twin-cylinder, four-cycle, overhead valve, industrial, air-cooled. Part No. 907549001, Kohler. Part No. 907549, Kohler with GFCI and electric fuel pump. Part No. 907549003, Kohler with GFCI, cooler/separator and electric fuel pump. Part No. 130831, Spoolmatic® 30A Aluminum Spool Gun. Part No. 137549, WC-24 Control. Welding Amp/Volt Process Mode Ranges CC/DC Stick/TIG 10– 300 A CV/DC MIG/FCAW 13– 35 V, 350 A CC/AC TIG/Stick 10– 225 A Rated Output at 104° F (40° C) 280 A at 32 V, 100% duty cycle 300 A at 32 V, 100% duty cycle 350 A at 32 V, 60% duty cycle 200 A at 25 V, 60% duty cycle Single-Phase Generator Power at 104° F (40° C) Peak: 13,000 watts Continuous: 11,000 watts Air Compressor Rotary screw with electric clutch for on/off. Oil change intervals 500 hours. Free Air Delivery @ 3600 RPM: 31 CFM (0.88 m3/min.) 3000 RPM: 28 CFM (0.79 m3/min.) 2400 RPM (Idle): 22 CFM (0.62 m3/min.) Working Pressure Constant: 80–160 PSIG Duty Cycle: 100% Oil Capacity: 1.75 qt. (1.7 L) Dimensions Net Weight 28”H (711 mm) 34.5”H (876 mm) to top of exhaust 771 lb. (350 kg) 20”W (508 mm) 59.625”D (1514 mm) Big Blue® 350 PipePro - DIESEL •Designed for transmission pipeline work, this system offers a complete welding solution. With Stick as well as MIG/FCAW welding capabilities it is ideal for the most demanding pipeline jobs. •Easy arc starts and better arc control provide improved performance to produce more consistent welds •Enhanced MIG/FCAW arc control for best in class performance •The Vault— ultimate control board reliability. A sealed aluminum case protects the circuit board from dust, dirt, moisture and heat. •Low OCV Stick (VRD) for improved operator safety without compromising arc starts •Auto Remote Sense™ (ARS) eliminates confusion of a remote/panel switch •Compact size and weight optimizes truck space •LINE-X® cover provides superior impact, corrosion and abrasion protection •Quiet operation. Only 70.7 decibels under full load. •Improves jobsite communication and safety •EPA, CSA, IEC and NEMA compliant •Standard features include digital preset weld meters, auto idle, 120-volt block heater and output contactor control •Optional stainless steel package available Processes: •Stick (SMAW) •MIG (GMAW) •Flux-Cored (FCAW) •TIG (GTAW) •Air Carbon Arc Cutting and Gouging (CAC-A) (rated 1/4” carbons) Engines: Diesel EPA Tier 4 Final choices CAT C1.5T: 24.7 HP at 1800 RPM. Turbo 3-cylinder, industrial, liquid-cooled. Mitsubishi S4L2: 24.7 HP at 1800 RPM. Four-cylinder, industrial, liquid-cooled. Part No. 907478, Big Blue 350 PipePro with CAT Turbo engine drive. Part No. 907478001, Big Blue 350 PipePro with CAT Turbo engine drive with stainless steel. Part No. 907428, Big Blue 350 PipePro with Mitsubishi engine drive. Part No. 907428001, Big Blue 350 PipePro with Mitsubishi engine drive with stainless steel. Welding Process Mode CC/DC TIG/Stick CV/DC MIG/FCAW Amp/Volt Ranges 20–400 A 14–40 V Rated Output at 104° F (40° C) 300 A at 32 V, 100% duty cycle 350 A at 27 V, 100% duty cycle 400 A at 24 V, 100% duty cycle Single-Phase Generator Power at 104° F (40° C) Peak: 12,000 watts Continuous: 10,000 watts Dimensions Net Weight 32”H x 26.25”W x 56”D (813 mm x 667 mm x 1,422 mm) Caterpillar: 1,063 lb. (482 kg) Mitsubishi: 1,018 lb. (462 kg) www.greggdistributors.ca SP04-23 MILLER® MLR/2778/2784 Engine-Driven Welders Big Blue® 400 Pro - DIESEL •Clean, quiet and reliable low-speed EPA-compliant diesel is more efficient than ever before. Ideal for construction, piping and fleet use. •400-amp output now available in a compact package. Provides up to 400 amps at 100% duty cycle. •The Vault— ultimate control board reliability. A sealed aluminum case protects the circuit board from dust, dirt, moisture and heat. •Low OCV Stick (VRD) for improved operator safety without compromising arc starts •Tailored arc control (DIG) allows arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010. •Quiet operation. Only 71.6 decibels (96 Lwa) under full load. Improves jobsite communication and safety. •CSA, IEC and NEMA compliant •Standard features include digital weld meters, auto idle, 120-volt block heater and output contactor control Processes: • Stick (SMAW) • MIG (GMAW) • Flux-Cored (FCAW) • TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (rated 3/16” carbons) Engines: Diesel EPA Tier 4 Final choices Kubota V1505: 20.2 HP at 1800 RPM. Four-cylinder, industrial, liquid-cooled. Mitsubishi S4L2: 24.7 HP at 1800 RPM. Four-cylinder, industrial, liquid-cooled. Part No. 907606, Big Blue® 400 Pro with Kubota engine. Part No. 907605, Big Blue® 400 Pro with Mitsubishi engine. Welding Process Mode CC/DC TIG/Stick CV/DC MIG/FCAW Amp/Volt Ranges 20–400 A 14–40 V Rated Output at 104° F (40° C) 300 A at 32 V, 100% duty cycle 350 A at 27 V, 100% duty cycle 400 A at 24 V, 100% duty cycle Single-Phase Generator Power at 104° F (40° C) Peak: 12,000 watts Continuous: 10,000 watts Dimensions Net Weight 32”H x 26.25”W x 56”D (813 mm x 667 mm x 1,422 mm) Kubota 950 lb. (431 kg) Mitsubishi 993 lb. (450 kg) Big Blue® 450 Duo CST™ - DIESEL •Durable dual-operator welder/generator delivers proven CST 280 Stick/TIG performance for maximum productivity and efficiency. Two separate outputs powered by one low-speed diesel engine delivers 280 amps of output per operator. •Two superior arcs in one compact package •Save fuel, reduce maintenance costs and increase productivity •Quiet operation. At 72.2 decibels at 23 ft. (7 m) under full load, it’s quieter than most single-operator models. Improves jobsite communication and safety. •Vandalism lockout kit. Lockable hinged steel panel protects front control and ignition switch. •Simple-to-operate process selector knob automatically sets proper DIG setting on E6010 and E7018 electrodes providing superior Stick performance •Lift-Arc™ start for TIG starts without the use of high frequency •Remote amperage control permits the use of standard and wireless amperage control devices •Increased efficiency. More arcs and better fuel economy equal increased profits for your business. Estimated savings are 34% with a dual-operator unit versus two single-operator units. Processes: • Stick (SMAW) • TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (rated 3/16” carbons, capable 1/4” carbons) Engines: EPA Tier 4 Final Mitsubishi S4L2: 24.7 HP at 1800 RPM. Four-cylinder, industrial, liquid-cooled. Part No. 907477, Big Blue® 450 Duo CST. Part No. 119172, Single-Phase Full KVA Plug Kit. Part No. 195301, Protective Cover. Process Output Mode Amperage Range Rated Output at 122°F (50°C) Single-Phase Generator Power at 122°F (50°C) Dimensions Net Weight DC Stick/TIG Separate (dual outputs) 5–225 A (each side) 175 A at 27 VDC, 100% duty cycle 32”H x 26.25”W x 56”D 1,064 lb. (483 kg) Continuous: 10,000 watts (813 mm x 667 mm x 5– 280 A (one side only) Paralleled (combined) 10– 450 A 350 A at 27 VDC, 100% duty cycle 1,422 mm) SP04-24 GREGG DISTRIBUTORS LTD. MILLER® MLR/2779/2784 Plasma Cutter Welders Spectrum SERIES PLASMA CUTTERS 375 XT/625 XT 875/875 Auto-Line •Power Factor Correction (PFC). Uses less energy by utilizing input power more efficiently and increases productivity by reducing nuisance circuit breaker trips •LED indicators for easy troubleshooting •Non-high-frequency arc starting does not interfere with or damage controls or computers •Postflow cooling circuitry extends life of the consumable and torch by cooling them with postflow air after trigger is released •Auto-Refire™ provides ultimate convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal •Built-in gas/ air filter and regulator. Provides air filtration of airborne particles five microns and larger. Additional filtration and water separation recommended. •LVC™ line voltage compensation provides peak performance power under variable input voltage conditions for clean, steady cuts •Wind Tunnel Technology™ prevents abrasive dust and particles from damaging internal components •Fan-OnDemand™ cooling system only operates when needed, reducing the amount of airborne dust/dirt pulled through the unit •Quick connect flexible work cable with heavy-duty clamp Spectrum® 625 And 875/875 Auto-Line Hand-Held And Machine Torches: •Ultra-Quick Connect™ hand-held torches with flexible cables. XT40 (625 X-TREME™) and XT60 (875 models) hand-held torches feature quick torch connection, ergonomic handles to help prevent operator fatigue and flexible cables that make maneuvering easier •Machine torch capable. 625 X-TREME™ and both 875 models can be ordered with a machine torch or can be converted to use a machine torch with optional Automation Kits •Long and short body machine torches. XT40M (625 XTREME™) and XT60M (875 models) machine torches are available in long or short body configurations. XT60M is also available in 25 or 50 ft. cable lengths. Processes: •Air Plasma Cutting • Air Plasma Gouging (625/875 models) ® Spectrum® 375 X-TREME™/625 X-TREME™ •Allows for any input voltage hook-up (120– 240 V, singlephase, 50/60 Hz for 375 XT and 60 Hz for 625 XT) with no manual linking, providing convenience in any job setting •X-CASE™ provides the ultimate protection during transport and storage. Additional space is ideal for MVP plugs, consumables box, gloves, etc. •Multi-voltage plug (MVP™) on 375 XT or MVP™ adapter on 625 XT allows connection to 120 or 240-volt receptacles without tools •Automatic air regulation compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance •Automatic gouging consumable detection (625 XT only). Detects gouging consumable and adjusts gas pressure to optimize performance, eliminating the need for a manual regulator. •375 XT model includes XT30 hand-held torch with ergonomic design and flexible cable •625 XT model includes Ultra-Quick Connect™ XT40 hand-held torch with ergonomic design and flexible cable; or XT40M long body or short body machine torch 375 X-TREME Comes Complete with: XT30 hand-held torch with 12 ft. (3.7 m) cable, Heavy-duty work clamp with 12ft. (3.7 m) flexible cable, 10 ft. (3 m) power cord with MVP 5-15P (120 VAC, 15 A) and 6-50P (240 V, 50 A) plugs, X-CASE for protection and storage, Shoulder strap, and Consumables box with two electrodes, two tips, deflector and air fitting 625 X-TREME Comes Complete with: XT40 hand-held torch with 12 ft. (3.7 m) or 20 ft. (6.1 m) cable; OR XT40M long body or short body machine torch with 25 ft. (7.6 m) cable, Heavy-duty work clamp and flexible cable with quick connect, 12 ft. (3.7 m) power cord with 240 V, L6-30P twist lock plug, MVP adapters with 5-15P (120 VAC, 15 A) and 6-50P (240 V, 50 A) plugs, X-CASE for protection and storage, Shoulder strap, Consumables box with two electrodes, two 40 A tips and one 30 A tip, 30 A drag shield, deflector and air fitting, and Machine torch packages include corresponding automation kit Model No. Hand-Held Torch Packages Part No. Spectrum® 875/875 Auto-Line™ •Spectrum 875 Auto-Line model allows for any input voltage hook-up (208 – 575 V, single- or three-phase) with no manual linking, providing convenience in any job setting. Standard Spectrum 875 model operates on 208/230 V, single-phase input voltage only. •Consumables storage compartment provides convenient access to consumables and parts. •Automatic air regulation compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance •Includes Ultra-Quick Connect™ XT60 hand-held torch with ergonomic design and flexible cable; or XT60M long body or short body machine torch 875 and 875 Auto-Line Comes Complete with: XT60 hand-held torch with 20 ft. (6 m) or 50 ft. (15.2 m) cable; OR XT60M long body or short body machine torch with 25 ft. (7.6 m) or 50 ft. (15.2 m) cable, Heavy-duty work clamp and flexible cable with quick connect, 10 ft. (3 m) power cord, Extra consumables, and Machine torch packages include corresponding automation kit Machine Torch Packages Part No. 25 ft. (7.6 m) 50 ft. (15.2 m) Long Body Short Body Long Body Short Body — — — — 907579002 907579003 — — 907583002 907583003 — — 907584002 907584003 907584005 907584004 12 ft. (3.7 m) 20 ft. (6.1 m) 50 ft. (15.2 m) Spectrum 375 XT 907529 — — Spectrum 625 XT 907579 907579001 — Spectrum 875 — 907583 907583001 Spectrum 875 AL — 907584 907584001 AUTOMATION KITS Converts hand-held torch packages to add machine torch capabilities. Machine torches are NOT included in automation kits and must be ordered separately. Part No. 301158, Spectrum 625 X-TREME Automation Kit. Requires a Spectrum 625 X-TREME with Ultra-Quick Connect™ feature for unit to be converted for use with long or short body machine torches. Part No. 301156, Spectrum 875 Automation Kit. Part No. 301157, Spectrum 875 Auto-Line Automation Kit. Includes remote pendant control for manual on/off. Model No. Input Power Spectrum 375 X-TREME Single-phase 120– 240 VAC, 50/60 Hz Spectrum 625 X-TREME Single-phase 120– 240 VAC, 60 Hz Spectrum 875 Single-phase 208/230 VAC, 50/60 Hz Spectrum 875 Auto-Line Three-phase 208– 575 VAC, 50/60 Hz Single-phase Amps Input at Rated Output 120 V (15 A): 20 A at 88 VDC, 35% duty cycle 18.1 120 V (20 A): 27 A at 91 VDC, 20% duty cycle 25.6 240 V: 40 A at 140 VDC, 50% duty cycle 13.6 120 V (15 A): 20 A at 88 VDC, 35% duty cycle 18.1 120 V (20 A): 27 A at 91 VDC, 20% duty cycle 25.6 240 V: 40 A at 140 VDC, 50% duty cycle 13.6 208 V: 60 A at 140 VDC, 40% duty cycle 208 V: 47 230 V: 60 A at 140 VDC, 50% duty cycle 230 V: 42 208 V: 60 A at 140 VDC, 40% duty cycle 208 V: 27.5 230– 380 V: 60 A at 140 VDC, 50% duty cycle 230 V: 25 380– 575 V: 60 A at 140 VDC, 60% duty cycle 380 V: 15 380– 575 V: 50 A at 140 VDC, 100% duty cycle 460 V: 12.4 575 V: 9.8 208 V: 60 A at 140 VDC, 40% duty cycle 208 V: 47.4 230 V: 60 A at 140 VDC, 50% duty cycle 230 V: 42.2 230 V: 50 A at 140 VDC, 100% duty cycle Rated Output at 40°C (104°F) Only 875 Auto-Line has 3-Phase capabilities. KVA KW 2.2 3.1 3.3 2.2 3.0 6.4 9.9 2.1 3.0 3.1 2.1 2.9 6.3 9.8 9.9 9.4 9.9 9.7 Rated Cutting Capacity 375 XT: Steel/ Stainless - 3/8” (9.5 mm) Aluminum - 1/4” (6.4 mm) 625 XT: Steel/ Stainless - 5/8” (15.9 mm)* Aluminum - 3/8” (9.5 mm) 875/875 AL: Steel/ Stainless - 7/8” (22.2 mm) Aluminum - 5/8” (15.9 mm) *Stainless: 1/2” (12.7 mm) for Spectrum 625 X-TREME. Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. Compressor Requirement 5.0 CFM (142 L/min.) at 90 PSI (621 kPa) 6.0 CFM (170 L/min.) at 90 PSI (621 kPa) 6.75 CFM (191 L/min.) at 90 PSI (621 kPa) Dimensions 9”H x 5.5”W x 13.25”D (229 mm x 140 mm x 337 mm) 9”H x 5.5”W x 13.25”D (229 mm x 140 mm x 337 mm) 13.5”H x 8.75”W x 18.5”D (343 mm x 222 mm x 470 mm) Net Weight with Torch 19 lb. (8.6 kg) 12 ft. 21 lb. (9.5 kg) 20 ft. 23 lb. (10.5 kg) 25 ft. 24 lb. (10.7 kg) 20 ft. 49 lb. (22.2 kg) 50 ft. 58 lb. (26.3 kg) 20 ft. 54 lb. (24.5 kg) 25 ft. 56 lb. (25.4 kg) 50 ft. 63 lb. (28.6 kg) www.greggdistributors.ca SP04-25 MILLER® MLR/2784 Plasma Cutting Accessories FLEXIBLE WORK CABLE Work cable with quick connect and heavy-duty clamp. Part No. 234838, 20 ft. (6.1 m) length. Part No. 234930, 50 ft. (15.2 m) length. SUCTION/MAGNETIC PIVOT BASE Add this to your cutting guide for convenient attachment to all flat surfaces. The extended arm accommodates holes up to 30” in diameter. Part No. 195979. CABLE COVERS Part No. 239642, 20 ft. (6.1 m) length. Part No. 231867, 25 ft. (7.6 m) length. Part No. 231868, 50 ft. (15.2 m) length. PLASMA STANDOFF ROLLER GUIDE Helps maintain recommended standoff distance to maximize cutting performance and improve tip life. Part No. 253054. MVP™ PLUGS For Spectrum 375 X-TREME, Millermatic 211 Auto-Set with MVP, Maxstar 150 models, Diversion 180, and Multimatic 200. Allows connection of machine to 115/120-volt or 230/240-volt receptacles without tools—just choose the plug that fits the receptacle. Part No. 219258, For power cable 6-50P (230/240 V, 50 A). Part No. 219261, For power cable 5-15P (115/120 V, 15 A). Part No. 219259, For power cable 5-20P (115/120 V, 20 A). NO. 30B ECONOMY CART with CORD WRAP PLASMA CIRCLE-CUTTING GUIDES IN-LINE AIR FILTER KIT RTI FILTER & BRACKET For 875 and 875 Auto-Line. This economical running gear provides mobility, includes a cord wrap and extra storage space, and is angled for easy front panel access. Part No. 300511. For 375 X-TREME, 625 X-TREME, 875, and 875 Auto-Line. Mounts to back of the plasma cutter. Includes male and female 1/4” NPT quick-disconnect fittings and hose for easy on/off connection. The replaceable filter element filters to .85 microns for removal of 99.9% of water, dirt and oil. Part No. 228926. Part No. 228928, Replaceable filter element. MVP™ ADAPTERS For Spectrum 625 X-TREME. Allows connection of machine to 120 or 240-volt receptacles without tools—just choose the adapter cord that fits the receptacle. Part No. 254328, For connection to 6-50P receptacle (240 V, 50 A). Part No. 254330, For connection to 5-15P receptacle (120 V, 15 A). Part No. 254331, For connection to 5-20P receptacle (120 V, 20 A). SPECTRUM PLASMA CUTTER HAND-HELD TORCHES •Robust tip front end design optimizes arc performance and tip life •New retaining cup design provides increased cutting visibility and quick turn for easy consumable change •Industry’s only true drag shield protects tip for long life and easy template cutting •Trigger guard protects against inadvertent arc initiation •80° handle provides natural arm and elbow positioning while cutting •No-slip grip for easy control and torch dexterity •Ergonomic design with unique thumb guide and finger grip contours Part No. 249949, 12 ft. (3.7 m) XT30 for 375 X-TREME. Part No. 255685, 20 ft. (6.1 m) XT30 for 375 X-TREME. Part No. 260633, 12 ft. (3.7 m) XT40 with disconnect for 625 X-TREME. Part No. 260635, 20 ft. (6.1 m) XT40 with disconnect for 625 X-TREME. XT30/XT40 Part No. 249953, 20 ft. (6.1 m) XT60 for 875/875 Auto-Line. Part No. 249954, 50 ft. (15.2 m) XT60 for 875/875 Auto-Line. XT60 PLASMA TORCH CONSUMABLE KITS Part No. 253520, For XT30. Part No. 253521, For XT40. Part No. 256033, For XT60. SP04-26 GREGG DISTRIBUTORS LTD. For XT30C, XT30, XT40 and XT60. Cut straight lines or circles up to 12” in diameter. Part No. 253055. For 875 and 875 Auto-Line. Dryer will remove water, dirt and oil as small as one micron with 99.9% efficiency. Can be mounted on plasma cutter or on wall. Install as close as possible to point of air consumption. Part No. 300491. SPECTRUM PLASMA CUTTER MACHINE TORCHES For Spectrum 625 X-TREME Part No. 259305, 25 ft. (7.6 m) long body XT40M. Part No. 257462, 25 ft. (7.6 m) short body XT40M. For Spectrum 875 and 875 Auto-Line Part No. 249955, 25 ft. (7.6 m) long body XT60M. Part No. 249956, 50 ft. (15.2 m) long body XT60M. Part No. 257464, 25 ft. (7.6 m) short body XT60M. XT30 CONSUMABLES Part No. 249926, Electrode. Part No. 249927, Tip. Part No. 249930, Drag Shield. Part No. 249931, Swirl Ring. Part No. 249932, Retaining Cup. Part No. 249933, Shield Deflector. Part No. 249969, O-Ring. XT40 CONSUMABLES Part No. 249928, Tip. Part No. 249931, Swirl Ring. Part No. 249932, Retaining Cup. Part No. 249933, Shield Deflector. Part No. 249934, Gouge Tip. Part No. 249936, Gouge Shield. Part No. 249937, Machine Shield. Part No. 249969, O-Ring. XT60 CONSUMABLES Part No. 262643, 40A Tip. Part No. 249929, 60A Tip. Part No. 249935, Gouge Tip. Part No. 256026, Electrode. Part No. 256027, Drag Shield. Part No. 256028, Swirl Ring. Part No. 256029, Retaining Cup. Part No. 256030, Deflector Shield. Part No. 256031, Gouging Shield. Part No. 263834, O-ring. Part No. 265226, Shield. MILLER® MLR/2783 Gas Equipment - Outfits HEAVY DUTY CUTTING, WELDING & HEATING OUTFITS These premium heavy-duty Oxy-fuel outfits include just about everything needed for your cutting, welding, brazing or heating project: •Heavy-duty Series 40 or medium-duty Series 30 highly accurate, brass regulators with corrosion-resistant gauges and shatter-resistant poly carbonate lenses •Heavy-duty torches •Torch-mount flashback arrestors for added safety (acetylene outfits only) •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks •Lighter •Safety glasses •Tip cleaner •Operations manual Acetylene outfits include: 25 ft. (7.5 m) 1/4” (6 mm) twin hose and H743 torch-mount flashback arrestors Propane/Propylene outfits include: 20 ft. (6.1 m) ¼” (6 mm) “T” grade hose and check valves Typical applications: Heavy fabrication, construction, pipeline, maintenance/repair, rail and truck repair. Part No. HBA-40510 Fuel Gas Acetylene Torch Handle WH200A Cutting Cutting Attachment Tip SC209 SC12-1 SC12-2 Acetylene WH200A SC209 SC12-1 up to 5/8" (16 mm) with tip incl. SW205 up to 8" (203 mm) with optional tips WH200A SC209 SC40-1 WH200A SC209 SC60-1 up to 5/8" (16 mm) with tip incl. — up to 8" (203 mm) with optional tips up to 5/8" (16 mm) with tip incl. — up to 8" (203 mm) with optional tip HBA-40300 HBA-30510 HBA-30300 HBA-30510LP Propane or Natural Gas HBA-30510MP Propylene Cutting Capacity up to 1¼" (32 mm) with tips incl. up to 8" (203 mm) with optional tips Welding Tip SW205 Welding Capacity Heating Tip ST602 Oxygen Regulator 40-175-540 CGA 540 up to 1/8" (3 mm) with tip incl. up to 1/2" (13 mm) with optional tips up to 1/8" (3 mm) with tip incl. up to 1/2" (13 mm) with optional tips — ST602 30-100-540 CGA 540 ST615 — ST815 30-100-540 CGA 540 Fuel Gas Regulator 40-15-510 CGA 510 40-15-300 CGA 300 30-15-510 CGA 510 30-15-300 CGA 300 30-50-510 CGA 510 HEAVY-DUTY CUTTING OUTFITS Hand cutting torch outfits are built for the toughest jobs and include: •SC229 nickel-plated cutting torch with a reversible cutting lever and an ease-on oxygen design for smooth starts and restarts. •Heavy-duty Series 40 or medium-duty Series 30 highly accurate, brass regulators with corrosion-resistant gauges and shatter-resistant poly carbonate lenses •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks •Operations manual HBS outfits include: Hard Hat™ gauge/regulator guards HBAS outfits include: 20 ft. (6.1 m) 3/16” (5 mm) twin hose, H743 torch-mount flashback arrestors, lighter, safety glasses, and tip cleaner Typical applications: Heavy fabrication, construction, shipyard, rail car, rail and truck repair. Part No. HBS-H510S Fuel Gas Acetylene Cutting Cutting Attachment Tip SC229 SC12-2 Acetylene SC229 HBS-H300S HBAS-30510 HBAS-30300 SC12-1 Cutting Capacity Oxygen Fuel Gas Regulator Regulator up to 1-1/4" (32 mm) with tips incl. 40 series w/ 2.5" gauges 40-15-510S up to 12" (305 mm) with optional tips 40-175-540S CGA-510 CGA 540" 40-15-300S CGA-300 up to 5/8" (16 mm) with tip incl. 30 series w/ 2" gauges 30-15-510 up to 12" (305 mm) with optional tips 30-100-540 CGA-510 CGA 540" 30-15-300 CGA-300 MEDIUM DUTY CUTTING, WELDING & HEATING OUTFITS These premium medium-duty Oxy-fuel outfits include just about everything needed for your cutting, welding, brazing or heating project: •Medium-duty Series 30 highly accurate, brass regulators with corrosion-resistant gauges and shatter-resistant poly carbonate lenses •Medium -duty torches •Torch-mount flashback arrestors for added safety (acetylene outfits only) •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks •Lighter •Safety glasses •Tip cleaner •Operations manual Acetylene outfits include: 25 ft. (7.5 m) ¼” (6 mm) twin hose and H743 torch-mount flashback arrestors Propane/Propylene outfits include: 20 ft. (6.1 m) ¼” (6 mm) “T” grade hose and check valves Typical applications: Fabrication, farm and ranch, pipe, truck and auto, refrigeration, maintenance/repair. Part No. MBA-30510 Fuel Gas Acetylene MBA-30300 MBA-30510LP Propane or MBA-30510MP Natural Gas Torch Handle WH100 Cutting Cutting Attachment Tip MC509 MC12-0 MC12-1 MC40-1 MC60-1 Cutting Capacity up to 5/8" (16 mm) with tips incl. up to 6" (152 mm) with optional tips up to 5/8"" (16 mm) with tip incl. up to 4"" (102 mm) with optional tips Welding Tip MW205 - Welding Capacity Heating Tip MT603 up to 1/8" (3 mm) with tip incl. up to 3/8" (9.8 mm) with optional tips MT805 Oxygen Regulator 30 series w/ 2" gauges 30-100-540 CGA 540 30 series w/ 2" gauges 30-100-540 CGS 540 Fuel Gas Regulator 30-15-510 CGA-510 30-15-300 CGA-300 30-50-510 CGA 510 www.greggdistributors.ca SP04-27 MILLER® MLR/2783 Gas Equipment - Outfits Toughcut™ DUTY CUTTING, WELDING & HEATING OUTFITS Versatile Toughcut outfits include many feature found on more expensive outfits: •Medium-duty Series 30 highly accurate, brass regulators with corrosion-resistant gauges and shatter-resistant poly carbonate lenses •Medium -duty torches •20 ft. (6.1 m) 3/16” (5 mm) twin hose •Check valves for added safety •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks •Lighter •Safety glasses •Operations manual Typical applications: Fabrication, farm and ranch, pipe, hobby, auto, refrigeration, maintenance/repair. Part No. MB55A-510 Fuel Gas Acetylene Torch Handle CW5A Cutting Cutting Attachment Tip CC509P MC12-1 MB55A-300 Cutting Capacity up to 5/8" (16 mm) with tips incl. up to 6" (152 mm) with optional tips Welding Tip MW205 Welding Capacity up to 1/8" (3 mm) with tip incl. up to 3/8" (9.8 mm) with optional tips Heating Tip MT603 Oxygen Regulator 30 series w/ 2" gauges 30-100-540 CGA 540 Fuel Gas Regulator 30-15-510 CGA-510" 30-15-300 CGA-300 Versa-Torch™ PORTABLE OUTFIT One of the most versatile systems on the market, the Versa-Torch outfit includes: •lightweight nickel-plated torch handle and cutting attachment •Rugged, high-density polyethylene carrier •12.5 ft. (3.8 m) 3/16” (5 mm) twin hose •regulator-mount safety check valves •”R” 20-cu.-ft. oxygen and “MC” 10-cu.-ft. acetylene cylinders •AT60 tip tube •13716 heating head •Lighter •Safety glasses •Operations manual Typical applications: manufacturing, maintenance/repair, air conditioning, refrigeration, plumbing, metal fabrication, jewelry, metal sculpture and many others. Part No. VT-4T Fuel Gas Acetylene Torch Handle AW1A Cutting Cutting Attachment Tip AC309 MC12-00 Cutting Capacity up to 36/16" (5 mm) with tips incl. Brazing Tip LT103 LT104 LT106 Oxygen Regulator 1/2 - 3/4" (12-19 mm) 30 series 5/8 - 1" (16-25 mm) w/ 2" gauges 3/4 - 1-1/2" (19-38 mm)" 30-100-540 CGA 540" Brazing Capacity Fuel Gas Regulator "30-15-200 CGA-200 COMBINATION TORCH & TIP PACKAGES These premium combination kits are available with cutting, welding and heating tips or with multiple cutting tips. Torches may be used with alternate fuel gases and tips designed for alternate fuel. Included: •Heavy-duty or medium-duty torch •H743 Torch-mount flashback arrestors for added safety (acetylene outfits only) •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks Typical applications: Heavy fabrication, construction, pipeline, maintenance/repair, rail and truck repair. 16206 (Heavy-duty) Acetylene Torch Handle WH200A 16205 (Medium-duty) Acetylene WH100 MC209 MC12-1 up to 5/8" (16 mm) with tip incl. MW203 up to 6" (153 mm) with optional tips 16280 (Heavy-duty) 16281 (Medium-duty) Acetylene WH200A SC209 Acetylene WH100 MC509 SC12-0 SC12-1 MC12-0 MC12-1 up to 5/8" (16 mm) with tip incl. up to 8" (203 mm) with optional tips up to 5/8" (16 mm) with tip incl. up to 6" (153 mm) with optional tips 16280LP (Heavy-duty) Propane WH200A SC209 SC40-0 SC40-1 16281LP (Medium-duty) Propane WH100 MC509 MC40-0 MC40-1 Part No. Fuel Gas Cutting Cutting Attachment Tip SC209 SC12-1 Cutting Capacity up to 5/8"" (16 mm) with tip incl. up to 8"" (203 mm) with optional tips Welding Tip SW203 Welding Capacity Heating Tip (Avg BTU/Hr. ST602 (40,000) up to 5/64" (1.9 mm) with tip incl. up to 1/2" (13 mm) with optional tips up to 5/64" (1.9 mm) MT603 with tip incl. (40,000) up to 3/8" (9.8 mm) with optional tips - - up to 5/8"" (16 mm) with tip incl. up to 8" (203 mm) with optional tips - - up to 5/8" (16 mm) with tip incl. up to 6" (153 mm) with optional tips - - 16206 16281 SP04-28 GREGG DISTRIBUTORS LTD. MILLER® MLR/2783 Gas Equipment - Torches HEAVY-DUTY TORCH HANDLE Heavy-duty handle allows high gas flow for large cutting tips and heating tips. Heavy-duty handles have replaceable hose connections. ”B”-size inlet connections are 9/16”-18. WH200A torch handle is covered by Miller's lifetime warranty when used with authentic Miller | Smith tips. Compatible Cutting Attachments: SC209, SC205, SC509 Compatible Tips: Welding: SW200 Series; Heating: ST600 and ST800 Series Length: 7.5” (191 mm) Weight: 1.01 lb. (0.46 kg) Handle Diameter: 1” (25.4 mm) Valve Assembly Replacement: G729-5A (also for SW1A, SW1B and WH200) Part No. WH200A. HEAVY-DUTY CUTTING ATTACHMENTS Cuts up to 8” (203 mm) thick steel. Solid silver-brazed construction. Features o-ring seating and easy-to-change slip-in Graf-Tite® cutting tips with cost-saving soft seats. Use with any industrial fuel gases — acetylene, propane, natural gas, propylene, hydrogen, and many others. Several models of standard and special-purpose tips are available for use in SC200 Series cutting attachments. SC200 series torch handles are covered by Miller's lifetime warranty when used with authentic Miller | Smith tips. Compatible Handle: WH200A Compatible Tips: SC Series Length: 12.5” (318 mm) Weight: 1.83 lb. (0.83 kg) Part No. SC205, 75° Head angle. Part No. SC209, 90° Head angle. MEDIUM-DUTY TORCH HANDLE Easy handling, high-quality mid-size torch handle. Handles all but the highest volume heating and heaviest welding needs. Features rugged silver-brazed construction, forged brass butt and precision machined brass head. Stainless steel ball-type valves reduce uneven valve wear and provide easy flame adjustment. ”B”-size inlet connections are 9/16”-18 right and left hand. WH100 torch handle is covered by Miller's lifetime warranty when used with authentic Miller | Smith tips. Compatible Cutting Attachments: MC505 and MC509 Compatible Tips: Welding: MW400 Series; Heating: MT800 Series Length: 7” (178 mm) Weight: 0.86 lb. (0.39 kg) Handle Diameter: 15/16” (24 mm) Valve Assembly Replacement: LW17 (also for MW5 and MW5A) Part No. WH100. MEDIUM-DUTY CUTTING ATTACHMENTS Popular medium-duty cutting attachment easily cuts up to 6” (153 mm) steel. Solidly constructed to last a lifetime — silverbrazed joints, stainless steel tubes, brass forged butt and head. This torch has the same quality features and construction as the larger and heavier Miller | Smith cutting attachments. Use with any industrial fuel gases — acetylene, propane, butane, natural gas, propylene, hydrogen and many others. MC500 series torch handles are covered by Miller's lifetime warranty when used with authentic Miller | Smith tips. Compatible Handle: WH100 and MW5 Compatible Tips: MC Series* Length: 11.25” (286 mm) Weight: 1.1 lb. (0.5 kg) Part No. MC505, 75° Head angle. Part No. MC509, 90° Head angle. Standard-Duty Airline™ TORCH HANDLE Specially designed to handle standard-duty welding, brazing, cutting and fabricating. Light weight and compact size provide easy handling, even in confined areas. Needle valves located at front end for easy one-hand flame adjustment. ”A”-size inlet connections are 3/8”-24 right and left hand. AW1A torch handle is covered by Miller's lifetime warranty when used with authentic Miller | Smith tips. Compatible Cutting Attachments: AC309 Compatible Tips: Welding: AW200 Series; Heating: AT600 Series; Twin Flame Tips: AT600 and AT600X6 Length: 5.75” (146 mm) Weight: 0.37 lb. (0.17 kg) Handle Diameter: 11/16” (17 mm) Valve Assembly Replacement: AW11A Part No. AW1A. STANDARD-DUTY Airline™ CUTTING ATTACHMENTS Small, lightweight cutting attachment with cutting capacity up to 3” thick (76 mm) steel. This torch has the same quality construction and features built into each Miller | Smith cutting attachment. AC309 torch handle is covered by Miller's lifetime warranty when used with authentic Miller | Smith tips. Compatible Handle: AW1A Compatible Tips: MC Series (except #MC12-5) Length: 8.5” (216 mm) Weight: 1 lb. (0.44 kg) Part No. AC309, 90° Head angle. MC509 SC205 *MC12 Series not compatible with #MC505. Gas Axe™ HAND CUTTING TORCHES SC SERIES HAND CUTTING TORCHES Gas Axe™ extra-heavy-duty torches are 100% tested and inspected, and are ideal for scrap and demolition cutting. Safety engineered; designed for severe applications. Excellent for use with propane or natural gas. Works with all gases including propane/propylene-based fuels, natural gas and acetylene. Extra-high-capacity cuts up to 24” (610 mm) with acetylene. Cuts up to 20” (508 mm) with propane. Compatible Cutting Tips: Acetylene: SC12-00 thru SC12-6, SC56-1 thru SC56-9; Propane and Propane-Based: SC40-0 thru SC40-4, SC46-2 thru SC46-6, SC50-00 thru SC50-9; Propylene: SC60-0 thru SC60-6, SC36-1 thru SC36-6; SpecialPurpose Tips: SC2-2, SC2-4 Recommended High-Flow Regulators: Oxygen: 40-175-540 or 40-275-540 (Cylinder), 46-175 (Manifold); LP Gas: 40-50510 (Cylinder), 46-50 (Manifold) Head Angle Length Part No. in Degrees Inches (mm) SC929 90 21 (533) SC935 75 36 (914) SC939 90 SC930 180 SC945 75 48 (1,219) SC949 90 SC940 180 SC965 75 72 (1,829) SC969 90 SC960 180 SC929 Cuts up to 12” (305 mm) thick steel. Features sintered metal inlet filters, o-ring seating and easy-to-change slip-in Graf-Tite® cutting tips with cost-saving soft seats. Super-tough, thick-wall brass forged heads reduce warping and distortion. SC225S and SC229S have even thicker-walled heads for more severe service and applications. Use with any industrial fuel gases — acetylene, propane, natural gas, propylene, hydrogen, and many others. Several models of standard and special purpose tips are available for use in SC Series cutting torches. Cutting torches are covered by Miller's lifetime warranty when used with authentic Miller | Smith tips. Compatible Cutting Tips: Acetylene: SC12-00 thru SC12-6, SC56-1 thru SC56-5; Propane and Propane-Based: SC40-0 thru SC40-4, SC46-2 thru SC46-6, SC50-00 thru SC50-6; Propylene: SC60-0 thru SC60-6, SC36-1 thru SC36-6; SC Series SpecialPurpose Tips Length: 17” (432 mm) Weight: 2.6 lb. (1.18 kg) Part No. SC175, 75° Head angle. Part No. SC179, 90° Head angle. Length: 20.5” (521 mm) except SC220 21” (533 mm) for SC220 Weight: 2.7 lb. (1.22 kg) Part No. SC225, 75° Head angle. Part No. SC225S, 75° Head angle. Thick-walled. Part No. SC229, 90° Head angle. Part No. SC229S, 90° Head angle. Thick-walled. Part No. SC220, 180° Head angle. SC175 Length: 36” (914 mm) Weight: 3.3 lb. (1.5 kg) Part No. SC365, 75° Head angle. Part No. SC369, 90° Head angle. Part No. SC360, 180° Head angle. SC369 SC220 www.greggdistributors.ca SP04-29 MILLER® MLR/2783 Gas Equipment - Regulators HEAVY-DUTY SINGLE-STAGE REGULATORS - Series 40™ Brass construction for dependable service in corrosive atmospheres. Series 40 single-stage regulators comprise a complete line of versatile regulators for welding, cutting, heating and other industrial applications. Heavy-duty construction and simplified design provide high gas flow and longer trouble-free operation. Stainless steel diaphragm allows use with liquid gases. Gauges (2.5”/64 mm) Delivery Inlet Pressure Connection Inlet Outlet 40-175-540 Oxygen 0–175 PSIG 4,000 PSIG 200 PSIG CGA 540 0–12 Bar 276 Bar 14 Bar 40-275-540 0–275 PSIG 400 PSIG 0–19 Bar 28 Bar 40-15-300 Acetylene 0–15 PSIG 400 PSIG 30 PSIG CGA 300 0–1 Bar 28 Bar 2 Bar 40-15-510 CGA 510 40-50-510 LP Gas (Propane, 0–50 PSIG 400 PSIG 60 PSIG CGA 510 Propylene or 0–3 Bar 28 Bar 4 Bar Natural Gas) 40-275-580 Nitrogen 0–275 PSIG 4,000 PSIG 400 PSIG CGA 580 0–19 Bar 276 Bar 28 Bar Part No. Gas Outlet Max Inlet Pressure Connection 9/16”-18 RH 3,000 PSIG ”B” 207 Bar 9/16”-18 LH ”B” 400 PSIG 28 Bar 9/16”-18 LH ”B” 400 PSIG 28 Bar 5/8”-18 RH Internal 3,000 PSIG 207 Bar 40-175-540 40-50-510 MEDIUM-DUTY SINGLE-STAGE REGULATORS - Series 30™ Rugged medium-duty industrial-grade regulators. Series 30 single-stage regulators are extremely durable and contain our exclusive Sure Seat™ filtered seat technology for extended seat and regulator life. Filtered seats prevent contamination from entering the seating area, reducing repair costs and downtime. These highly accurate regulators are manufactured with a rugged forged body, corrosion-resistant bright nickel-plated bonnet and a highly durable neoprene composite diaphragm. Gauges (2”/51 mm) Delivery Inlet Max Inlet Outlet Part No. Gas Pressure Connection Connection Pressure Inlet Outlet 30-100-540 Oxygen 0–100 PSIG 4000 PSIG 150 PSIG CGA 540 9/16”-18 RH 3,000 PSIG 0–7 Bar 276 Bar 10 Bar ”B” 207 Bar 30-20-540 0–20 PSIG 30 PSIG 0–1 Bar 2 Bar 30-15-510 Acetylene 0–15 PSIG 400 PSIG 30 PSIG CGA 510 9/16”-18 LH 400 PSIG 0–1 Bar 28 Bar 2 Bar ”B” 28 Bar 30-15-300 CGA 300 30-15-520 CGA 520 30-15-200 CGA 200 30-50-510 LP Gas (Propane, 0–50 PSIG 400 PSIG 60 PSIG CGA 510 9/16”-18 LH 400 PSIG Propylene or 0–3 Bar 28 Bar 4 Bar ”B” 28 Bar Natural Gas) 30-15-510 30-50-510 Series 30™ SINGLE-STAGE REGULATOR TWIN PACKS Part No. Gas Regulator HTP2 Oxygen 30-100-540 LP or Acetylene 30-15-510 HTP5 Oxygen 30-100-540 Acetylene 30-15-300 Specs Delivery Pressure: 0–100 PSIG Inlet Connection: CGA 540 Delivery Pressure: 0–15 PSIG Inlet Connection: CGA 510 Delivery Pressure: 0–100 PSIG Inlet Connection: CGA 540 Delivery Pressure: 0–15 PSIG Inlet Connection: CGA 300 •Solid brass industrial construction •Durable PTFE high-pressure seat •Convenient and economical •100% tested and inspected TWO-STAGE REGULATORS - Series 30™ Series 30 two-stage regulators drop cylinder pressure to working pressure in two stages for consistent and accurate outlet pressure and flow regardless of inlet pressure. Recommended where outlet pressure and flow must be maintained without variation. Gauges (2”/51 mm) Delivery Inlet Max Inlet Outlet Part No. Gas Pressure Connection Connection Pressure Inlet Outlet 35-125-540 Oxygen 0–125 PSIG 4,000 PSIG 150 PSIG CGA 540 9/16”-18 RH 3,000 PSIG 0–9 Bar 276 Bar 10 Bar ”B” 207 Bar 35-15-510 Acetylene 0–15 PSIG 400 PSIG 30 PSIG CGA 510 9/16”-18 LH 400 PSIG 0–1 Bar 28 Bar 2 Bar ”B” 28 Bar Inert 0–50 PSIG 4,000 PSIG 60 PSIG CGA 580 5/8”-18 RH 3,000 PSIG 35-50-580 0–3 Bar 276 Bar 4 Bar Internal 207 Bar 35-125-540 SINGLE-STAGE STATION REGULATORS - Series 46™ (HEAVYDUTY) & Series 36™ (MEDIUM-DUTY) Series 46 and Series 36 brass line regulators are rugged, accurate and corrosion-resistant with shatterresistant polycarbonate gauge lenses. The Series 46 regulators feature a stainless steel diaphragm and 2.5” (64 mm) gauges while the Series 36 has a neoprene composite diaphragm and 2” (51 mm) gauges. Delivery Gauges Diameter Inlet UL Listed Max Inlet Outlet Part No. Gas Inches (mm) Pressure Connection Pressure Connection 46-175 Oxygen 0–175 PSIG 2.5 (64) CGA024 9/16”-18 RH ”B” 200 PSIG / 14 Bar 36-150 0–12 Bar 2 (51) 500 PSIG / 35 Bar 46-15 Acetylene 0–15 PSIG 2.5 (64) CGA025 9/16”-18 LH ”B” 100 PSIG / 7 Bar 36-15 0–1 Bar 2 (51) 200 PSIG / 14 Bar 46-50 LP Gas 0–50 PSIG 2.5 (64) CGA025 9/16”-18 LH ”B” 100 PSIG / 7 Bar 36-50 0–3 Bar 2 (51) 500 PSIG / 35 Bar SP04-30 GREGG DISTRIBUTORS LTD. 46-15 MILLER® MLR/2783 Gas Equipment - Regulators THREE-STAGE NITROGEN LOW-PRESSURE BLANKETING REGULATORS This preset regulator is specially designed to deliver a highly accurate and consistent lowpressure supply of nitrogen to oil-filled power transformers. Available with or without electronic pressure switch. The regulator will deliver and maintain 0.50 PSIG in the head space of oil-filled transformers. A built-in self-relieving valve set at 8 PSIG protects the system from over-pressurization due to temperature variation. Both models come with rapid-fill bypass pressure valve allowing rapid filling of the transformer with 6 PSIG of pressure. Part No. 16391, Without pressure switch. Part No. 16347-3, With pressure switch. Preset Outlet Pressure 1st Stage: 150 PSIG into 2nd stage 2nd Stage: 8 PSIG into 3rd stage 3rd Stage (delivery pressure): 0.4–0.6 PSIG into outlet Bypass Rapid Fill/Purge: 6 PSIG Inlet Connection: CGA580 Outlet Connection: 1/2” FNPT Max Inlet Pressure: 3,000 PSIG 16347-3 16391 HVAC/REFRIGERATION PURGE/LEAK TEST REGULATOR Our single-stage nitrogen regulator is specially designed to meet the specifications of HVAC refrigerant purging applications. This regulator is used with nitrogen to test HVAC systems to locate leaks and to purge an area for installation and repair. Its compact size is suitable for use where space is limited. •Economical and accurate •Solid brass body provides durability •Large durable nylon knob for easy pressure adjustment •Highly accurate 2-inch (51 mm) gauges with shatter-resistant lenses Part No. Gas 30-450-580 Nitrogen Gauges (2”/51 mm) Max Inlet Outlet Inlet Delivery Pressure Connection Connection Pressure Inlet Outlet 0–450 PSIG 4,000 PSIG 600 PSIG CGA 580 7/16”-20 External 3,000 PSIG 0–31 Bar 276 Bar 41 Bar Flair Fitting 207 Bar PREMIUM FLOWMETER REGULATORS - Series 30™ Rugged medium-duty industrial-grade regulators provide efficient and accurate regulation, and include our exclusive selfcentering flowball. They are constructed with our exclusive Sure Seat™ filtered seat technology for extended seat and regulator life. Filtered seats prevent contamination from entering the seating area, reducing repair costs and downtime. Filtered seats also reduce CO2 freeze-up. Provides high argon flow capacity up to 80 SCFH. Flowmeter Inlet Flow Range Preset Delivery Gas No. Pressure Connection 32-80-580 H1105 Argon, CO2 10-80 SCFH 80 PSIG CGA 580 5–38 LPM 6 Bar 32-80-320 CO2 CGA 320 32-30-580 H1240 Argon, CO2 10-60 SCFH 30 PSIG CGA 580 32-30-580-6* 5–28 LPM 2 Bar Helium 20-190 SCFH 10–90 LPM General/ 0-10 Range Any Gas Scale 10-80 SCFH 30 PSIG CGA 320 35-30-320 H1240 CO2 5–38 LPM 2 Bar Part No. *Includes 6 ft. x 1/4” inert gas hose. Outlet Connection 5/8”-18 RH Internal Max Inlet Pressure 3,000 PSIG 207 Bar 5/8”-18 RH Internal 3,000 PSIG 207 Bar 35-30-320 32-80-580 5/8”-18 RH Internal 3,000 PSIG 207 Bar ECONOMY FLOWMETER REGULATORS (SINGLE-STAGE) Exceptional value and compact design. Provides precise shielding gas regulation for MIG and TIG welding applications and more. Shatter-resistant polycarbonate flow tube is repositionable for easy reading and features triple-scale for argon, helium and argon/CO2. It has a packless o-ring flow tube seal which reduces maintenance and a built-in rupture disc reduces possibility of flow tube damage due to high-pressure inlet surge. Precision flow-adjustment valve allows easy adjustment to desired setting. Part No. H2051B-580 Part No. H2051B-580H, Includes 6-ft. (1.8 m) hose with inert hose fittings. Flow Range Preset Delivery Pressure CO2 0-50 SCFH 50 PSIG 0–24 LPM 3 Bar Helium 0-160 SCFH 0–78 LPM Argon, 0-60 SCFH Argon/CO2 Mix 0–28 LPM Gas Inlet Connection CGA 580 G5/8”A-14 RH British fitting on H2051A-B9 Outlet Connection 5/8”-18 RH Internal Max Inlet Pressure 3,000 PSIG 207 Bar www.greggdistributors.ca SP04-31 MILLER® MLR/2783 Gas Equipment - Regulators DUAL FLOWMETER REGULATOR (SINGLE-STAGE) Dual flowmeter regulator has a back-pressure compensated flow tube with shatter-resistant polycarbonate cover. It is repositionable for easy reading and features triple scale for argon, helium and argon/CO2. Features include sensitive needle valve for fine adjustment and a 2” (51 mm) gauge. Part No. 33A-50-580. Inlet Flow Range Preset Delivery Pressure Connection CO2 0-50 SCFH 50 PSIG CGA 580 0–24 LPM 3 Bar Helium 0-160 SCFH 0–78 LPM Argon, 0-60 SCFH Argon/CO2 Mix 0–28 LPM Outlet Connection 5/8”-18 RH Internal Gas Max Inlet Flowmeter Pressure 3,000 PSIG H2230A 207 Bar Note: When using argon/CO2 mix, read argon scale. FLOWMETERS Premium flowmeter models are designed to operate at inlet pressures of 80 PSIG (model H1105) and 30 PSIG (SelecO-Gas model H1240). They can be attached to regulators or pipeline installations. Features include an extra-long flow tube made of shatter-resistant polycarbonate resin that is accurate to within five percent of the full scale reading. Flow tubes have a unique ball guide which centers the ball in the tube and keeps it centered (competitors use a ball floating in a non-centering tube which allows the ball to float off-center resulting in greater flows than the reading indicates). Our exclusive Selec-O-Gas™ flow tube has separate scales for argon, CO2, helium and general non-corrosive gas. Just rotate the outer tube to the scale you desire. Part No. Inlet Connection Outlet Connection Recommended Inlet Pressure 0-80 SCFH 0–38 LPM 1/4” NPT Male 5/8”-18 RH Internal 80 PSIG 6 Bar Argon, CO2, Helium, General 10-80 SCFH 5–38 LPM 1/4” NPT Male 5/8”-18 RH Internal 30 PSIG 2 Bar CO2 0-50 SCFH 0–24 LPM 1/4” NPT Male on H2230 5/8”-18 RH Internal 50 PSIG 3 Bar Helium 0-160 SCFH 0–78 LPM 5/8”-18 RH External on H2231 Argon, Argon/ CO2 Mix 0-60 SCFH 0–28 LPM Description Gas Flow Range H1105* Heavy-Duty Argon, CO2 H1240 Heavy-Duty (Select-O-Gas) H2230A H2231A Standard-Duty (Multi-Scale) H1105 *H1105 supersedes H1103; H1240 supersedes H1230E. Note: When using argon/CO2 mix, read argon scale. SINGLE-STAGE FLOW GAUGE REGULATORS - Series 30™ Single-stage flow gauge regulators are compact and feature a forged brass body with 2” diameter gauges and a self-reseating pressure relief valve. They also include a Sure Seat™ protective inlet filter and a durable neoprene-composite diaphragm. Gauges (2”/51 mm) Inlet Connection Inlet Outlet 31-50-580 Argon 10-50 SCFH 0-4000 PSIG 10-50 SCFH CGA 580 31-50-580-6* CGA 320 31-50-320 CO2 Part No. Gas Flow Range Outlet Connection 5/8”-18 RH Internal PREMIUM-QUALITY GAUGES Pressure gauges (PSI/Bar) and flow gauges (CFH/LPM) have dual scale readings and are manufactured in accordance with our rigid quality standards. All gauges feature precision watch-type movements for optimum accuracy and 1/4-turn lens rings. They also feature one-piece shatter-resistant polycarbonate lenses with protective lips to prevent damage to the high-visibility cupped faces. Brass Case Gauges (2.5”/64 mm) Part No. GA037-07, 400 PSI/28 Bar Part No. GA043-07, 4000 PSI/280 Bar Black Case Gauges (2”/51 mm) Part No. GA138-03, 400 PSI/28 Bar Part No. GA139-03, 4000 PSI/280 Bar Part No. GA145-03, 6000 PSI/400 Bar SP04-32 GREGG DISTRIBUTORS LTD. GA037-07 GA138-03 Max Inlet Pressure 3000 PSIG 207 Bar MILLER® MLR/2783 Gas Equipment - Tips HEAVY-DUTY CUTTING TIPS - SC12 SERIES Acetylene Preheat cutting tips for general hand and machine cutting. This series provides excellent preheat characteristics required for machine cutting. Compatible cutting attachments and torches: •SC200 attachments •All SC Series hand torches and machine torches Part No. SC12-00 SC12-0 SC12-0 SC12-1 SC12-1 SC12-2 SC12-2 SC12-2 SC12-3 SC12-3 SC12-4 SC12-4 SC12-4 SC12-5 SC12-5 SC12-5 SC12-6 SC12-6 Metal Thickness Inches (mm) 3/16 (5) 1/4 (6) 3/8 (10) 1/2 (13) 5/8 (16) 3/4 (19) 1 (25) 1¼ (32) 1½ (38) 2 (51) 2½ (64) 3 (76) 4 (102) 5 (127) 6 (152) 8 (203) 10 (254) 12 (305) Consumption (SCFH) Acetylene Drill Size Oxygen Preheat Cutting Jet Cutting Preheat 24 40 50 75 85 105 115 135 170 180 240 265 315 420 485 550 750 975 7 7.5 7.5 11 11 12 12 12 14 14 15 15 16 30 30 30 32 32 6.5 7 7 9.5 9.5 10.5 10.5 10.5 12 12 13 13 14 26 26 26 28 28 68 62 62 56 56 54 54 54 51 51 45 45 45 41 41 41 32 32 SC56-1 SC56-1 SC56-2 SC56-2 SC56-2 SC56-3 SC56-3 SC56-5 SC56-5 SC56-5 SC56-7 SC56-9 SC56-9 Two-piece medium preheat cutting tips for general hand and machine cutting with propane, propane-based fuel gases and natural gas. Compatible cutting attachments and torches: •All SC Series cutting attachments, hand torches and machine torches Part No. SC40-0 SC40-0 SC40-1 SC40-1 SC40-2 SC40-2 SC40-2 SC40-3 SC40-3 SC40-4 SC40-4 SC40-4 1/4 (6) 3/8 (10) 1/2 (13) 5/8 (16) 3/4 (19) 1 (25) 1¼ (32) 1½ (38) 2 (51) 2½ (64) 3 (76) 4 (102) Consumption (SCFH) Fuel Oxygen Preheat Cutting Preheat 40 50 75 85 105 115 135 170 180 240 265 315 38 38 38 38 38 38 38 38 38 65 65 65 8 8 8 8 8 8 8 8 8 15 15 15 HEAVY-DUTY CUTTING TIPS - SC50 SERIES HEAVY PREHEAT Propane or Natural Gas (TWO-PIECE) Heavy preheat two-piece cutting tip series for hand and machine cutting up to 20-inch thick steel. Compatible cutting attachments and torches: •SC200 Series attachments •All SC Series hand torches •Two-hose machine torches •Three-hose machine torch Metal Thickness Inches (mm) 3/16 (5) 1/4 (6) 3/8 (10) 1/2 (13) 5/8 (16) 3/4 (19) 1 (25) 1¼ (32) 1½ (38) 2 (51) 2½ (64) 3 (76) 4 (102) 5 (127) 6 (152) 8 (203) 10 (254) 12 (305) 14 (354) 16 (406) 18 (457) 20 (508) Consumption (SCFH) Acetylene Drill Size Oxygen Preheat Cutting Jet Cutting Preheat 1/2 (13) 5/8 (16) 3/4 (19) 1 (25) 1¼ (32) 1½ (38) 2 (51) 2 – 5 (127) 6 (152) 8 (203) 8 – 14 (356) 14 – 20 (508) 24 (610) 75 85 105 115 135 170 180 420 485 550 1,250 2,150 2,600 33 33 33 33 33 43 50 57 66 72 110 145 175 30 30 30 30 30 39 45 52 60 65 100 130 160 56 56 54 54 54 51 51 41 41 41 28 3 3 One-piece cutting tips designed for cutting dirty or heavily coated metals. For rugged duty including scrapping, heavy construction, or where excessive reflected heat is present. Compatible cutting attachments and torches: •SC200 Series attachments •All SC Series hand torches and machine torches Metal Thickness Inches (mm) SC36-1 SC36-1 SC36-2 SC36-2 SC36-2 SC36-3 SC36-3 SC36-4 SC36-4 SC36-4 SC36-6 SC36-6 62 62 56 56 54 54 54 51 51 45 45 45 SC50-00 SC50-0 SC50-0 SC50-1 SC50-1 SC50-2 SC50-2 SC50-2 SC50-3 SC50-3 SC50-4 SC50-4 SC50-4 SC50-5 SC50-5 SC50-5 SC50-6 SC50-6 SC50-7 SC50-8 SC50-8 SC50-9 Metal Thickness Inches (mm) HEAVY-DUTY CUTTING TIPS - SC36 SERIES Propylene RUGGED DUTY Part No. Drill Size Cutting Jet Part No. Heavy preheat cutting tips designed for cutting coated metals, heavy piercing, fast preheating and cutting thick steel sections up to 24”. Compatible cutting attachments and torches: •SC200 Series attachments •All SC hand torches •Two-hose machine torches (maximum size SC56-7) •Three-hose machine torch Part No. HEAVY-DUTY CUTTING TIPS - SC40 SERIES Propane or Natural Gas (TWO-PIECE) Metal Thickness Inches (mm) HEAVY-DUTY CUTTING TIPS - SC56 SERIES Acetylene HEAVY PREHEAT Consumption (SCFH) Propylene Drill Size Oxygen Preheat Cutting Jet Cutting Preheat 1/2 (13) 5/8 (16) 3/4 (19) 1 (25) 1¼ (32) 1½ (38) 2 (51) 2½ (64) 3 (76) 4 (102) 10 (254) 12 (305) Oxygen/Propane Consumption (SCFH) Propane Oxygen Preheat Cutting Preheat 24 40 50 75 85 105 115 135 170 180 240 265 315 420 485 550 750 975 1,250 1,500 1,800 2,150 47 47 47 70 70 70 70 75 75 75 75 75 80 80 80 90 230 280 330 375 400 420 13 13 13 15 15 15 15 16 16 16 16 16 17 17 17 20 50 60 62 80 85 90 75 85 105 115 135 170 180 240 265 315 750 975 70 70 70 70 70 70 70 70 70 70 105 105 15 15 15 15 15 15 15 15 15 15 22 22 56 56 54 54 54 51 51 45 45 45 32 32 Oxygen/Natural Gas Consumption (SCFH) Drill Size Natural Gas Cutting Jet Oxygen Preheat Cutting Preheat 24 40 50 75 85 105 115 135 170 180 240 265 315 420 485 550 750 975 1,250 1,500 1,800 2,150 58 62 62 70 70 70 70 70 70 70 75 75 75 82 82 82 120 165 200 220 250 250 36 38 38 40 40 40 40 40 40 40 45 45 45 50 50 50 75 100 120 135 150 150 68 62 62 56 56 54 54 54 51 51 45 45 45 41 41 41 32 32 28 17 17 3 www.greggdistributors.ca SP04-33 MILLER® MLR/2783 Gas Equipment - Tips HEAVY-DUTY CUTTING TIPS Propane or - SC46 SERIES RUGGED DUTY Natural Gas One-piece cutting tips designed for cutting dirty or heavily coated metals. For rugged duty including scrapping, heavy construction, or where excessive reflected heat is present. Compatible cutting attachments and torches: •SC200 Series attachments •All SC Series hand torches and machine torches Part No. SC46-2 SC46-2 SC46-2 SC46-4 SC46-4 SC46-4 SC46-5 SC46-5 SC46-5 SC46-6 SC46-6 Metal Thickness Inches (mm) 3/4 (19) 1 (25) 1¼ (32) 2½ (64) 3 (76) 4 (102) 5 (127) 6 (152) 8 (203) 10 (254) 12 (305) HEAVY-DUTY CUTTING TIPS - SC60 SERIES Propylene MEDIUM PREHEAT (TWO-PIECE) Two-piece medium preheat cutting tips designed to provide optimum performance with propylene or propylene-based fuel gases. Compatible cutting attachments and torches: •SC200 Series attachments •All SC Series hand torches •Two-hose machine torches •Three-hose machine torch ACETYLENE HEAVY-DUTY Acetylene SPECIAL-PURPOSE TIPS Oxygen/Propane Consumption (SCFH) Oxygen Propane Preheat Cutting Preheat 105 70 15 115 70 15 135 70 15 240 70 15 265 70 15 315 70 15 420 105 22 485 105 22 550 105 22 750 105 22 975 105 22 Part No. SC60-0 SC60-1 SC60-1 SC60-2 SC60-2 SC60-2 SC60-3 SC60-3 SC60-4 SC60-4 SC60-4 SC60-5 SC60-5 SC60-5 SC60-6 SC60-6 Metal Thickness Inches (mm) 3/8 (10) 1/2 (13) 5/8 (16) 3/4 (19) 1 (25) 1¼ (32) 1½ (38) 2 (51) 2½ (64) 3 (76) 4 (102) 5 (127) 6 (153) 8 (203) 10 (254) 12 (305) Oxygen/Natural Gas Consumption (SCFH) Drill Size Oxygen Natural Gas Cutting Jet Preheat Cutting Preheat 105 70 41 56 115 70 41 56 135 70 41 56 240 70 41 56 265 70 41 56 315 70 41 56 420 52 52 54 485 52 52 54 550 52 52 54 750 52 52 54 975 52 52 54 Consumption (SCFH) Oxygen Propylene Drill Size Preheat Cutting Jet Cutting Preheat 35 75 85 105 115 135 170 180 240 265 315 420 485 550 750 975 35 38 38 38 38 38 38 38 58 58 58 58 58 58 58 58 Consumption (SCFH) Capacity Inches (mm) Oxygen Acetylene Extra Long Cutting - SC12-4X9 SC12-4X9 Cutting 4 (102) 331 14 Tip for hard-to-reach areas. Size 4. SC13-3 Gouging 3/8 (10) wide 151 35 Gouging - SC13-3 and SC13-5 1/4 (6) deep For edge preparation, removal of welds or gouging cracked metals. SC13-5 Gouging 1/2 (13) wide 246 50 Rivet/Riser Cutting - SC14-3 3/8 (10) deep Cuts heads of bolts and rivets. It can also be used in 180° head cutting torch SC14-3 Riser 1½ (38) rivets 190 20 to cut out boiler tubes. Works equally well for cutting risers and bulk heads. SC15-2 Washing 1/2 (13) wide 336 40 Rivet Blowing and Metal Washing — SC15-2 3/8 (10) deep Quickly removes large quantities of metal. Heavy preheat primarily used as SC17-0 Plate or Thin 3/8 (10) 55 4 a rivet blowing tip, but can be used for stud removal, metal washing, gouging, Cutting veeing and groove cutting. Consumption (SCFH) Average Plate Cutting — SC17-0 Part No. Purpose Oxygen Acetylene BTU/Hour ”Drag”-style step tip cuts thin sheet metal with absolute minimum burn over and plate warpage. SC83 Heating 83,000 58 52* Heating — SC83 *Two 350-cu.-ft. cylinders required. Delivers large volume of heat quickly for bending, straightening, shrinking, forming and other heating applications. It allows heating with a one-piece cutting torch. Not recommended for use with cutting attachments. Compatible cutting attachments and torches SC83 •SC200 Series attachments •All SC Series hand torches and machine torches Part No. 10 9 9 9 9 9 9 9 15 15 15 15 15 15 15 15 62 56 56 54 54 54 51 51 45 45 45 41 41 41 32 32 Purpose SC12-4X9 SC13-3 SC14-3 SC15-2 SC17-0 PROPANE OR NATURAL GAS/PROPYLENE HEAVY-DUTY SPECIAL-PURPOSE TIPS General Gouging (Propane) - SC2-2 and SC2-4 For removing old welds or cracks, veeing and groove cutting. Heavy-Duty Gouging - SC23-3 (Propane); SC23-3M (Propylene) For removing old welds or cracks, veeing and groove cutting. Heating (Propane) - SC112 Provides lots of heat fast with economical LP gas and oxygen. Not recommended for use with cutting attachments. Propylene Compatible cutting attachments and torches Propane or •SC200 Series attachments Natural Gas •All SC Series hand torches and machine torches Part No. Purpose SC2-2 Gouging SC2-4 Gouging SC23-3 Gouging SC23-3M Gouging Part No. SC112 Purpose Heating *Two 100-lb. cylinders required. SP04-34 GREGG DISTRIBUTORS LTD. Consumption (SCFH) Capacity Fuel Inches (mm) Oxygen 5/16 (8) wide 389 53 1/8 (3) deep 3/8 (10) wide 564 53 1/4 (6) deep 3/8 (10) wide 174 31 1/4 (6) deep 1/4 (6) wide 174 31 3/8 (10) deep Average BTU/Hour 289,000 Consumption (SCFH) Oxygen Propane 495 125* SC2-2 SC112 MILLER® MLR/2783 Gas Equipment - Tips MEDIUM & STANDARD-DUTY TIPS Acetylene - MC12 SERIES Slip-in cutting tips for general medium-duty hand cutting. Use with medium pressure acetylene and oxygen. Compatible cutting attachments and torches: •MC509 and AC309 (AC309: maximum size MC12-4) Part No. MC12-00 MC12-00 MC12-0 MC12-0 MC12-1 MC12-1 MC12-2 MC12-2 MC12-3 MC12-3 MC12-4 MC12-4 MC12-4 MC12-5 MC12-5 Metal Thickness Inches (mm) Consumption (SCFH) Oxygen Acetylene Drill Size Preheat Cutting Jet Cutting Preheat 1/8 (3) 3/16 (5) 1/4 (6) 3/8 (10) 1/2 (13) 5/8 (16) 3/4 (19) 1 (25) 1½ (38) 2 (51) 2½ (64) 3 (76) 4 (102) 5 (127) 6 (152) 30 30 40 46 75 81 107 118 170 181 249 267 320 420 485 7 7 7 7 9 9 11 11 12 12 14 14 15 15 15 6 6 6 6 7 7 9 9 10 10 12 12 13 13 13 68 68 62 62 55 55 54 54 51 51 45 45 45 41 41 MEDIUM & STANDARD-DUTY TIPS Propylene - MC60 SERIES (TWO-PIECE) Two-piece medium preheat cutting tips for hand cutting with propylene or propylene-based fuel gases. Compatible cutting attachments and torches: •MC505, MC509, and AC309 MEDIUM & STANDARD-DUTY TIPS Propane - MC40 SERIES (TWO-PIECE) Two-piece medium preheat cutting tips for hand cutting with propane and propane-based fuel gases. Compatible cutting attachments and torches: •MC505, MC509, and AC309 Part No. MC40-00 MC40-0 MC40-0 MC40-1 MC40-1 MC40-2 MC40-2 MC40-2 MC40-3 MC40-3 MC40-4 MC40-4 MC40-4 Part No. MC60-1 MC60-1 MC60-2 MC60-2 MC60-2 MC60-3 MC60-3 MC60-4 MC60-4 MC60-4 Metal Thickness Inches (mm) Consumption (SCFH) Oxygen Propane Drill Size Preheat Cutting Jet Cutting Preheat 3/16 (5) 1/4 (6) 3/8 (10) 1/2 (13) 5/8 (16) 3/4 (19) 1 (25) 1¼ (32) 1½ (38) 2 (51) 2½ (64) 3 (76) 4 (102) Metal Thickness Inches (mm) 24 40 46 75 81 107 118 133 170 181 249 267 320 35 35 35 35 35 35 35 35 35 35 35 35 35 7 7 7 7 7 7 7 7 7 7 7 7 7 68 62 62 55 55 54 54 54 51 51 51 51 51 Consumption (SCFH) Oxygen Propylene Drill Size Preheat Cutting Jet Cutting Preheat 1/2 (13) 5/8 (16) 3/4 (19) 1 (25) 1¼ (32) 1½ (38) 2 (51) 2½ (64) 3 (76) 4 (102) 75 81 107 118 133 170 181 249 267 320 26 26 26 26 26 42 42 42 42 42 7 7 7 7 7 11 11 11 11 11 55 55 54 54 54 51 51 45 45 45 HEAVY-DUTY WELDING TIPS Acetylene - SW200 SERIES MEDIUM-DUTY WELDING TIPS Acetylene - MW200 SERIES Consumption (SCFH)* Drill Size Oxygen Acetylene SW201 1/32 (0.7) 2.3 2.3 71 SW203 5/64 (1.9) 3.2 3.2 67 SW205 1/8 (3) 6 6 57 SW207 3/16 (5) 12 12 54 3/8 (10) 23 23 49 SW209 SW210 1/2 (13) 36 36 44 Part No. LW15, O-ring replacement (package of 25). Consumption (SCFH)* Drill Size Oxygen Acetylene MW201 1/32 (0.7) 2.3 2.3 71 MW203 5/64 (1.9) 3.2 3.2 67 MW205 1/8 (3) 6 6 57 MW207 3/16 (5) 12 12 54 3/8 (10) 23 23 49 MW209 Part No. MW15, O-ring replacement (package of 25). The SW200 Series is for general and heavy welding and brazing. Swaged construction provides greater heat concentration for improved ”puddle” control. Tips are bent to 63.5° angle. Compatible torch handles: •WH200A Fuel gases: These tips may also be used for brazing with acetylene-based fuels and propylenebased fuel gases. When using these gases, select a tip two sizes larger than recommended for the same work as acetylene. Part No. Welding Capacity Inches (mm) *Consumption (SCFH: cubic feet per hour) figures represent the average volumes of gases consumed when acetylene is added until sooty smoke just disappears from the acetylene flame prior to opening the oxygen valve and adjusting to a neutral flame. The MW200 Series is for general purpose medium-duty welding which features our ”soft flame” for easier puddle control and better penetration. Tips are bent to 63.5° angle. Compatible torch handles: •WH100 Fuel gases: These tips may also be used for brazing with acetylene-based fuels and propylenebased fuel gases. When using these gases, select a tip two sizes larger than recommended for the same work as acetylene. Part No. Welding Capacity Inches (mm) *Consumption (SCFH: cubic feet per hour) figures represent the average volumes of gases consumed when acetylene is added until sooty smoke just disappears from the acetylene flame prior to opening the oxygen valve and adjusting to a neutral flame. Propane or General-purpose medium-duty brazing tips designed specifically for use with propane or Natural Gas propane-based mixture fuel gases with oxygen. Used for brazing applications and casting platinum. Compatible torch handles: •WH100. MEDIUM-DUTY WELDING TIP - MW411 SERIES Consumption (SCFH) Oxygen Fuel MW411 1/2 - 5/8 (13 - 16) 51.9 13 Part No. MW15, O-ring replacement (package of 25). Part No. Welding Range Inches (mm) www.greggdistributors.ca SP04-35 MILLER® MLR/2783 Gas Equipment - Tips STANDARD-DUTY WELDING TIPS - AW200 Airline™ SERIES Acetylene General-purpose standard-duty welding/brazing tips. Shorter, lighter and easier to handle. Compatible torch handles: •AW1A Fuel gases: These tips may also be used for brazing with acetylene-based fuels and propylene-based fuel gases. When using these gases, select a tip two sizes larger than recommended for the same work as acetylene. Consumption (SCFH)* Drill Size Oxygen Acetylene AW201 Up to 1/32 (0.7) 2.3 2.3 71 AW203 5/64 (1.9) 3.2 3.2 67 AW205 1/8 (3) 6 6 57 AW207 3/16 (5) 12 12 54 AW209 3/8 (10) 23 23 49 AW210 1/2 (13) 36 36 44 Part No. AW15, O-ring replacement (package of 25). Part No. Welding Capacity Inches (mm) *Consumption (SCFH: cubic feet per hour) figures represent the average volumes of gases consumed when acetylene is added until sooty smoke just disappears from the acetylene flame prior to opening the oxygen valve and adjusting to a neutral flame. HEAVY-DUTY HEATING TIPS - ST600 SERIES Multi-flame heating tips for our heavy-duty torch handles. Used for heat treating, bending, straightening, pre-heating, brazing, shrinking, forming, etc. Heads are manufactured from solid copper. Compatible torch handles: •WH200A Part No. ST602 ST603 ST605 ST610 Average BTU/Hour 40,125 71,750 124,670 194,890 Acetylene Consumption (SCFH) 350 Cu. Ft. Fuel Overall Length Drill Size Cylinders Required Inches (mm) Oxygen Acetylene 31 28 64 1 16 (406) 55 50 56 1 16 (406) 96 87 57 2 19 (483) 150 136 54 3 19 (483) Medium pressure oxy-propane or propane-based heating tips provide high heating Propylene performance with low-cost fuel gases including natural gas and propane-based gases. Propane or Compatible torch handles: Natural Gas •WH200A Part No. ST615 ST625 ST635* Average BTU/Hour 244,000 155,145 280,000 455,000 313,950 614,195 Consumption (SCFH) Overall Length Torch Head Inches (mm) Number Oxygen Fuel Gas 225–535 70–160 (propane) 16 (406) 1495 175–450 96–267 (natural gas) 235–430 100–160 480–1000 140-280 (propane) 31.5 (800) 1504 390–785 200–450 (natural gas) 670–1580 185–480 (propane) 31.5 (800) 1499 *ST635 requires 3/8” (10 mm) I.D. hose and #40-50-510 propane cylinder regulator. HEAVY-DUTY HEATING TIPS - ST800 SERIES Medium pressure oxy-propane or propane-based heating tips provide high heating performance with low-cost fuel gases including natural gas and propane-based gases. Compatible torch handles: •WH200A Part No. ST800 ST815 ST825 Average BTU/Hour 58,000 75,000 273,000 830,000 Propylene Propane Consumption (SCFH) Overall Length Torch Head Inches (mm) Number Oxygen Fuel Gas 107–108 22–24 15.5 (394) 16317 118–138 31–34 390–655 120-235 16 (406) 4642 580–1,500 225–525 31 (787) 4639 MEDIUM-DUTY HEATING TIPS - MT600 SERIES Versatile multi-flame heating tips for the popular medium-duty torch handles. Used for general heating of metals, brazing, hard surfacing, etc. Heads are manufactured from solid copper. Compatible torch handles: •WH100 Part No. MT603 MT605 MT610 Average BTU/Hour 40,125 73,085 128,970 Consumption (SCFH) 350 Cu. Ft. Fuel Overall Length Drill Size Cylinders Required Inches (mm) Oxygen Acetylene 31 28 64 1 10 (254) 57 51 56 1 16 (406) 100 90 57 2 18 (457) STANDARD-DUTY HEATING TIPS - AT605 SERIES Handy light-duty multi-flame tip for heating, brazing and applying hard facing metals. Uses medium pressure acetylene and oxygen. Heads are manufactured from solid copper. Compatible torch handles: •AW1A Part No. AT605 Average BTU/Hour 41,550 Acetylene Acetylene Consumption (SCFH) 200 Cu. Ft. Fuel Overall Length Drill Size Cylinders Required Inches (mm) Oxygen Acetylene 32 29 64 1 10 (254) SP04-36 GREGG DISTRIBUTORS LTD. MILLER® MLR/2783 Gas Equipment - Tips MEDIUM-DUTY HEATING TIPS - MT800 SERIES & MT615 Propylene Medium pressure oxy-propane or propane-based heating tips provide high heating performance with low-cost fuel gases including natural gas and propane-based gases. Compatible torch handles: •WH100 Part No. MT800 MT805 MT615 Average BTU/Hour 93,000 123,000 208,000 280,000 269,000 182,000 280,000 Consumption (SCFH) Oxygen Fuel Gas 119–121 36–38 (propane) 135–146 51–56 206–230 80-100 (propane) 242–270 120–135 225–535 70–160 (propane) 175–450 96–267 (natural gas) 235–430 100–160 Propane or Natural Gas Overall Length Torch Head Inches (mm) Number 12.5 (318) 16317 15 (381) 4642 15 (381) 1495 Gas Equipment - Accessories GASAVER™ Ideal for production brazing and welding applications, our GASAVER can help you realize huge savings by eliminating wasted gas during torch start-up/shut-down and between flame applications. Save time by eliminating repeated torch adjustment. GASAVER gives you a safe place to temporarily put your torch and is used by America’s largest production plants. Torch flame is automatically extinguished when torch is not in use. Simply pass torch over pilot flame to re-light. Part No. WDW100, is standard GASAVER for use with propylene gas and oxygen. Equipped with adjustable pilot light. Part No. WDW101, is GASAVER for general use with acetylene and oxygen. Can be installed in any convenient location on the line between regulators and torch. The closer the torch, the greater the savings in oxygen and acetylene. Equipped with adjustable pilot light. Part No. WDW104, is standard GASAVER equipped with adjustable pilot light for use with propane or natural gas at 4 PSI or more. WELDING HOSES IMPORTANT: ”R”-Grade welding hose is for use with acetylene only, as specified by the RMA-CGA Hose Standard. ”T”-Grade hose must be used with all other gases. CAUTION: Do not exceed the maximum working pressures (regulator setting) listed for the hoses during welding and cutting operations. Oxygen: (150 PSIG max.) Acetylene: (15 PSIG max.) Propane, propylene and all other fuel gases: (40 PSIG max.) Twin Hoses (Two-In-One) Connections Part No. Hose Type Length ID Diameter To Regulators To Torches RL1131 ”R”-Grade 25 ft. (7.6 m) 1/4” (6 mm) R11 (Oxygen) R11 (Oxygen) R12 (Fuel) R12 (Fuel) 9/16”-18 (”B”) 9/16”-18 (”B”) RL921 12.5 ft. (3.8 m) 3/16” (5 mm) R13D (Oxygen) R13D (Oxygen) R14D (Fuel) R14D (Fuel) RL1131 9/16”-18 (”B”) 9/16”-18 (”B”) RL935 20 ft. (6.1 m) 3/16” (5 mm) RA921 12.5 ft. (3.8 m) 3/16” (5 mm) R13D (Oxygen) R13 (Oxygen) R14D (Fuel) R14 (Fuel) 9/16”-18 (”B”) 3/8”-24 (”A”) TRL1131 ”T”-Grade 20 ft. (6.1 m) 1/4” (6 mm) R11 (Oxygen) R11 (Oxygen) RL121 R12 (Fuel) R12 (Fuel) 9/16”-18 (”B”) 9/16”-18 (”B”) Single Hoses Part No. Hose Type Length ID Diameter Connections For Use With RL121 ”R”-Grade 12.5 ft. (3.8 m) 3/16” (5 mm) 9/16”-18 LH (”B”) NE180 Handi-Heat torch 7294-1 Black Hose 6 ft. (1.8 m) 1/4” (6 mm) 5/8”-18 RH Male Flow gauges and flowmeter regulators OXY ACCESSORIES Part No. NE135B, Two-Hose Manifold — oxygen ”B” connections Part No. NE136B, Two-Hose Manifold — fuel ”B” connections Part No. 16229, Circle Cutting Guide cuts from 5/8” to 12” diameter holes. Works with all SC and MC style cutting tips. NE135B 16229 FLASHBACK ARRESTORS 7294-1 •May be used with acetylene, propane, propylene, hydrogen and natural gas •Built-in check valve prevents the reverse flow of gas •Requires no manual reset •Easy to install — attaches to standard ”B” fittings •High-quality brass construction, case is rugged and corrosion-resistant •Sintered stainless steel filter stops flashback fire Part No. H753 Regulator Mount (for use with CGA ”B” male fitting). Part No. H743, Torch Mount (High Flow) (do NOT exceed 15 PSIG when using acetylene gas). Hard Hat™ REGULATOR GUARDS Protect regulators from costly gauge replacement with our Hard Hat gauge guards. Promotes safety… designed to help prevent broken gauges which can lead to gas leaks. Time and cost savings… helps prevent costly equipment down time and expensive repairs. Part No. HB190, Made from rugged steel with a bright yellow, baked-enamel finish. Quickly and easily attaches to regulator. Fits Series 40™ brass regulators. Part No. H195, Formed from extremely tough, impact-resistant polycarbonate resin with a bright, safety-yellow finish. Fits Series 30™ single stage regulators. H195 HB190 REVERSE-FLOW CHECK VALVES Reverse-flow check valves are an important part of any oxy-fuel system. Without check valves, reverse flow of oxygen and fuel gases can occur when a tip becomes clogged, or when one cylinder empties during use. This could allow the higher pressure gas to back up into the other hose and into the regulator, thereby creating conditions which could lead to a regulator explosion. Our reverse-flow check valves close automatically when outlet pressures drop below 1/2 PSIG, preventing reverse flow of gases. Part No. H698, Regulator Mount. Inlet Connection: 9/16”-18 LH and RH Internal; Outlet Connection: 9/16”-18 LH and RH External. Part No. H697, Torch Mount. Inlet Connection: 9/16”-18 LH and RH External; Outlet Connection: 9/16”-18 LH and RH Internal. H698 H697 H753 www.greggdistributors.ca SP04-37 MILLER® MLR/2780 Fume Extraction FILTAIR® 130 •Portable high-vacuum weld fume extractors designed for use with accessories like nozzles and fume guns to collect weld fume particles at the source •Designed to capture weld fume •Unrivaled filtering performance. Designed to capture weld fume particles with a cleanable filter and safely deposit them in an integrated particle bin. •Less noise. Up to 70% quieter than some other extractors. Only 68.5 decibels at 5 ft. •Portable and compact. At only 46 pounds (21 kg) the vertical-shaped machine is easy to move around. Processes: •Stick (SMAW) • Flux-Cored (FCAW) • MIG (GMAW) • TIG (GTAW) Comes with: FilTek™ XL filter, 8 ft. collection hose, and 20 ft. power cord Part No. 300595, FILTAIR 130. Part No. 300673, 34 ft. (10.4 m) Collection Hose. Part No. 301267, Replacement Cleanable Filters. Part No. 300669, 11.8” (300 mm) width Magnetic Nozzle. Part No. 300672, 17 ft. (5.2 m) Collection Hose. Part No. 300668, Flexible Funnel Magnetic Nozzle. Model Accu-Rated™ Airflow Sound Level Motor Sound Level Dimensions Net Weight FILTAIR 130 132 CFM (62 L/sec.) 68.5 dBA at 5 ft. (1.5 m) 1 HP 115 VAC, 1-phase, 60 Hz 23”H x 12”W x 12”D at 11 A (584 mm x 305 mm x 305 mm) 46 lb. (21 kg) FILTAIR® MWX SERIES •Powerful systems that easily move to the weld area. Disposable or cleanable filter models for multiple applications. •Designed to capture weld fume. The MERV 15 rating of FilTek XL filters provides superior filtering of up to 95% of weld fume particulate. •Class-leading suction power is Accu-Rated at the hood to better capture weld fumes and provide a cleaner environment •Superior filters. Our FilTek XL filters are specifically designed for welding with a MERV 15 rating to outlast, out-filter, and outperform all the rest •Durable aluminum pre-assembled extraction arm with external adjustments for better airflow and longer life Self-Cleaning Models Additional Features: •Unrivaled filtering performance. Designed to capture weld fume particles with a cleanable filter and safely deposit them in an integrated particle bin. •One-minute cleaning cycle operates with a push of a button on the control panel. Note: Compressed air required to operate cleaning mechanism. •Disposal drawer provides easy and convenient access to empty out collected particles. Handle releases drawer allowing it to slide out. •Upgrade to self-cleaning models for high arc-on time, extracting from heavy fume processes, or when welding aluminum or galvanized materials Processes: •Stick (SMAW) • Flux-Cored (FCAW) • MIG (GMAW) • TIG (GTAW) Comes with: FilTek™ XL filter and Pre-assembled arm Part No. 300977, SA-807 7-ft. pre-assembled extraction arm. Part No. 951510, MWX-S (Self-Cleaning Model) with 7-ft. standard arm. Part No. 300978, SA-810 10-ft. pre-assembled extraction arm. Part No. 951511, MWX-S (Self-Cleaning Model) with 10-ft. standard arm. Part No. 300979, SA-812 12-ft. pre-assembled extraction arm. Part No. 951512, MWX-S (Self-Cleaning Model) with 12-ft. standard arm. Part No. 951507, MWX-D (Disposable Filter) with 7-ft. standard arm. Part No. 951508, MWX-D (Disposable Filter) with 10-ft. standard arm. Part No. 951509, MWX-D (Disposable Filter) with 12-ft. standard arm. Filter Accu-Rated™ Extraction Sound Level Motor Input Power Dimensions Net Weight without Arm Media Airflow Arm Dia. 2 490 ft. 875 CFM 8” Approximately 70 dBA 1 HP, 115 V, 1-phase, 60 Hz at 34.75”H x 31.75”W x 48”D MWX-S: 300 lb. (136 kg) (45.52 m2) (413 L/sec.) (203 mm) at 5 ft. (1.5 m) 3450 RPM approximately 11.9 A (883 mm x 806 mm x 1,219 mm) MWX-D: 238 lb. (108 kg) REPLACEMENT FILTERS FilTek XL filters efficiently capture the smallest weld fume particles and offer superior filter life. Part No. 300540, Self-cleaning models. Part No. 300539, Disposable filter models. HOOD LIGHT with ARC SENSOR Illuminates the welding zone and enables the fume extractor to start automatically when welding begins. Part No. 300689. FILTAIR® Capture 5 •The capture zone redefined. Innovative, extended-capture fume extraction system designed specifically for welding. •ZoneFlow™ technology. Extends the capture area up to five feet versus 12–18” with conventional source capture arms. •Minimizes downtime with fewer fume extractor adjustments. With increased capture area, arm interactions are dramatically minimized. •Designed to capture weld fume. The MERV 15 rating of FilTek XL filters provides superior filtering of up to 95% of weld fume particulate. •Source capture is designed to draw weld fume away from the welder’s breathing zone and keep the facility clean Processes: •Stick (SMAW) • Flux-Cored (FCAW) • MIG (GMAW) • TIG (GTAW) Comes with: FilTek™ XL filter and Durable, easy-to-move, pre-assembled, aluminum extraction arm with toolless external adjustments for higher airflows and longer filter life Part No. 951574, 460 V FILTAIR® Capture 5 with 10-ft. Extraction Arm. Part No. 301082, 10-ft. pre-assembled extraction arm. Part No. 951594, 575 V FILTAIR® Capture 5 with 10-ft. Extraction Arm. Part No. 301083, 12-ft. pre-assembled extraction arm. Part No. 951575, 460 V FILTAIR® Capture 5 with 12-ft. Extraction Arm. Part No. 301093, 460 V, 3-Phase Extractor Cart. Part No. 951595, 575 V FILTAIR® Capture 5 with 12-ft. Extraction Arm. Part No. 301154, 575 V, 3-Phase Extractor Cart. Part No. 301106, FilTek® XL Replacement Filter. Filter Media 452 ft.2 (42 m2) Accu-Rated™ Airflow 900 CFM (425 L/sec.) Extraction Arm Diameter 10” (254 mm) Sound Level Motor Approximately 77 dBA 3 HP, at 5 ft. (1.5 m) 3450 RPM SP04-38 GREGG DISTRIBUTORS LTD. Input Power Dimensions 230 VAC, 1-phase, 60 Hz at 13.5 A 460 VAC, 3-phase, 60 Hz at 3.7 A 575 VAC, 3-phase, 60 Hz at 3.0 A 43”H x 36”W x 48”D (1,092 mm x 915 mm x 1,219 mm) Net Weight 620 lb. (282 kg) with 12 ft. arm MILLER® MLR/2782 Welding Protection •Digital controls easily allow welder to adjust shade, delay, and sensitivity. •Premium headgear features unsurpassed fit and durability. Provides extensive adjustability settings and a pivoting top for better fit and comfort. WELDING HELMET FEATURES •External grind on Titanium 7300 and 9400 helmets allows welder to switch to grind mode with the push of a button. •InfoTrack™ technology on Titanium helmets allows the lens to track arc time while under the hood. Includes a digital clock display with the ability to set an alarm or timer. Classic Classic Classic Digital Titanium Titanium Digital Digital Series Series Series Elite™ 1600™ 1600i™ Pro-Hobby Performance™ FS#10 Variable VSi™ Flip-Up Shade Viewing Area 5.15 sq. in. 5.07 sq. in. 5.15 sq. in. 5.15 sq. in. 6.06 sq. in. 7.22 sq. in. 9.22 sq. in. 16 sq. in. 16 sq. in. Shades 10 10 8–12 8–13 8–13 Cut: 5–8 Cut: 5–8 10 10 Weld: 8–13 Weld: 8–13 Modes Weld Weld Weld Weld/X-mode Weld/Grind Weld/Cut/ Weld/Cut/ N/A N/A Grind Grind/X-mode Integrated No Yes No Yes No No No No Yes Grind Shield Auto-on Yes Yes Yes Yes Yes Yes Yes N/A N/A Sensors 2 2 2 3 2 3 4 N/A N/A TIG Rating 20 amps 20 amps 20 amps 5 amps/below 20 amps 5 amps 5 amps/below N/A N/A Switching Speed 1/3,600 1/3,600 1/10,000 1/20,000 1/20,000 1/20,000 1/20,000 N/A N/A Digital Controls No No No No Yes Yes Yes No No Prem. Headgear No No No No Yes Yes Yes No No InfoTrack™ No No No No No No No No No 16 oz. (454 g) 14 oz. (396 g) 16 oz. (454 g) 23 oz. (652 g) 16 oz. (454 g) 17 oz. (482 g) 18 oz. (510 g) 17 oz. (482 g) 22.5 oz. (638 g) Weight Features Classic Series FS#10 Digital Digital Titanium Titanium 7300™ 9400™ 7.22 sq. in. 9.22 sq. in. Cut: 5–8 Cut: 5–8 Weld: 8–13 Weld: 8–13 Weld/Cut/ Weld/Cut/ X-mode/ X-mode/ External Grind External Grind No No Digital Titanium 9400i™ 9.22 sq. in. Cut: 5–8 Weld: 8–13 Weld/Cut/ X-mode Yes 3 Yes 4 Yes 4 1/20,000 Yes Yes Yes 1/20,000 Yes Yes Yes 1/20,000 Yes Yes Yes Yes 5 amps/below 5 amps/below 5 amps/below 19 oz. (539 g) 20 oz. (567 g) 24 oz. (680 g) CLASSIC SERIES Digital Pro-Hobby™ SERIES Digital Performance™ SERIES Digital Elite™ SERIES Titanium Series™ MP-10™ SERIES •Miller quality for the value-minded welder who wants an autodarkening lens. •2-year warranty •FS#10 Flip-Up and VSi models feature integrated grinding shield plus VSi model adds X-mode •Designed with construction market in mind Part No. 263038, FS#10 Flip-Up. Part No. 231703, FS#10. Part No. 251292, Variable Shade. Part No. 260938, VSi™. •Ultimate helmets PLUS four modes of digital versatility for most welding and cutting applications. •Four arc sensors and four modes: weld, cut, grind and X-mode. •X-mode eliminates sunlight interference and low-amperage lens opening from obstructed sensors. Part No. 259485, Vintage Roadster™. Part No. 257217, Inferno™. Part No. 256173, Camouflage. Part No. 257213, Black. Part No. 269273, Blue Flame. •Ideal helmets for light-duty welding applications. Part No. 259486, Metalworks™. Part No. 256168, Red Flame. Part No. 256169, Camouflage. Part No. 256166, Black. •Industrial helmets for the most extreme welding and grinding applications •Four operating modes: weld, cut, grind and X-mode (not available on 1600/1600i models). •X-mode eliminates sunlight interference and low-amperage lens opening from obstructed sensors (not available on 1600/1600i models). •Silver shell reflects heat to keep helmet and user cool. •Aluminum heat shield protects analog lens in high-amperage applications. Part No. 256177, Titanium 9400i™. Part No. 256176, Titanium 9400™. Part No. 256175, Titanium 7300™. Part No. 255519, Titanium 1600i™. Part No. 245799, Titanium 1600™. •Mid-range helmets for most welding applications. Part No. 256160, ’64 Custom™. Part No. 256163, Camouflage. Part No. 256159, Black. •Miller quality for the value-minded welder •Passive shade 10 lens •Upgradable to auto-darkening lens Part No. 238496, Inferno™. Part No. 238497, Black. www.greggdistributors.ca SP04-39 MILLER® MLR/2782 Welding Protection Titanium Series™ REPLACEMENT PARTS Description Helmet shell, Titanium (QR) Inside lens cover (5¼” x 4½”) (5-pkg) Inside lens cover (4¼” x 2”) (5-pkg) Inside lens cover (4¼” x 2½”) (5-pkg) Auto-darkening lens assembly Filter plate Gasket, Lens assembly (QR) Front lens cover (4-11/16” x 5-5/8”) (5-pkg) Front lens holder, Titanium Ratchet headgear assembly Adjustment angle/stop hardware kit Fabric headband Replacement o-rings for kits #770248 (5 per pkg) Comfort cushion Battery tray, kit (left/right) Lens, Grinding Shield (Clear) Clips, Retaining Grinding Shield Button, Replacement External Grind Clips, Visor Hinge (i-Series Shell) Lens Tear-Off, Grind Shield (Clear) Kit, Weld Shield Hinge Titanium 1600 Titanium 1600i Titanium 7300 Titanium 9400 Titanium 9400i Analog Digital Analog Digital Analog Digital 243530245820243530258601 243530 258601245820 245820 235628235628 - - - - - - - 770237770237 - - - - - - - 216327216327216327216327 - - 245816256358245817256359245817256360 235630235630 - - - - - 245813245813 - 241977241977241977241977241977 216326216326216326216326 216326 216326216326 216326 243396245815243396243396 243396 243396245815 245815 - - - 256174 - 256174 - 256174 770248770248770248256178 770248 256178770248 256178 770249770249770249770249 770249 770249770249 770249 079975079975079975079975 079975 079975079975 079975 216336216336216336 - 216336 - 216336 - - 216339216339216339216339216339216339 - 245818 - - - - 245818245818 - 245819 - - - - 245819245819 - - - 256179 - 256179 - - 255070 - - - - 255070255070 - 254278 - - - - 254278 254278 - 269929 - - - - 269929269929 Digital Elite™ SERIES REPLACEMENT PARTS Description Helmet shell,Black Helmet shell, Camouflage Helmet shell, Inferno Helmet shell, Blue Flame Inside lens cover (4¼” x 2½”) (5-pkg) Auto-darkening lens assembly Gasket, auto-darkening lens assy Gasket, Lens assembly (QR) Gasket, front lens Front lens cover (4-11/16” x 5-5/8”) (5-pkg) Front lens holder, Black, flat Frame, lens holding Ratchet headgear assembly Adjustment angle/stop hardware kit Fabric headband Replacement o-rings for kits #770248 (5 per pkg) Comfort cushion Battery tray, kit (left/right) Analog Digital 216331216331 227190227190 223454223454 269274269274 216327216327 -256469 234758234758 241977241977 216337216337 216326216326 241978241978 216335234759 -256174 770248256178 770249770249 079975079975 216336 216339216339 Description Helmet shell, Black Inside lens cover (4¼” x 2”) (5-pkg) Inside lens cover (4¼” x 1¾”) (5-pkg) Auto-darkening lens assembly Gasket, Lens assembly (QR) Gasket, front lens Front lens cover (4¼” x 2”) (5-pkg) Front lens cover (4½” x 3¾”) (5-pkg) Front lens cover (5¼” x 4½”) (5-pkg) Front lens holder, Black, flat Frame, lens holding Adjustment angle/stop hardware kit Fabric headband Replacement o-rings for kits #770248 (5 per pkg) Comfort cushion Battery cover Lens, Grinding Shield (Clear) Clips, Retaining Grinding Shield Clips, Visor Hinge (i-Series Shell) Lens Tear-Off, Grind Shield (Clear) FS#10 VS Digital 232020232020 241461241461 241459241459 250533250533 770237770237 -256468 232028232028 231921231921 232030232030 232033232033 243395243395 - 256174 770248256178 770249770249 079975079975 216336 -256730 Description Helmet shell, Black Helmet shell, Red Flame Helmet shell, Camouflage Helmet shell, Metalworks Inside lens cover (4¼” x 1¾”) (5-pkg) Auto-darkening lens assembly Gasket, front lens Front lens cover (4½” x 3¼”) (5-pkg) Front lens holder, Black, flat Front lens holder, Gray Front lens holder, Red Front lens holder, Camouflage Ratchet headgear assembly Adjustment angle/stop hardware kit Fabric headband Replacement o-rings for kits #770248 (5 per pkg) Comfort cushion Battery tray, kit (left/right) Battery cover MP-10™ SERIES REPLACEMENT PARTS VSi™ FS#10 Flip-Up 231415231415 261824231415 - - - 770237 231410231410 231410 231571251293 261826770226 - - 261827 231412231412 - - - - 770237 231411231411 - - - 235628 231572231572 261828 - - - 261829 770248770248 770248770248 770249770249 770249770249 079975079975 079975079975 216336216336 216336216336 - 231413266781 - - 245818261830 - - 245819 - - 255070 - - 254278 - SP04-40 GREGG DISTRIBUTORS LTD. Analog Helmet shell, Black Helmet shell, Camouflage Helmet shell, Blue Rage Helmet shell, '64 Custom Inside lens cover (4¼” x 2”) (5-pkg) Auto-darkening lens assembly Gasket, front lens Front lens cover (4½” x 5½”) (5-pkg) Front lens holder, Black, flat Front lens holder, Blue Front lens holder, Camouflage Ratchet headgear assembly Adjustment angle/stop hardware kit Fabric headband Replacement o-rings for kits #770248 (5 per pkg) Comfort cushion Battery tray, kit (left/right) CLASSIC SERIES REPLACEMENT PARTS Description Digtal Pro-Hobby™ SERIES REPLACEMENT PARTS Digital Performance™ SERIES REPLACEMENT PARTS Description Part No. Helmet shell, Black Helmet shell, Inferno Inside lens cover (5¼” x 4½”) (5-pkg) Filter plate Gasket, front lens Front lens cover (4-11/16” x 5-5/8”) (5-pkg) Frame, lens holding Spacer, lens holding (MP-10) Adjustment angle/stop hardware kit Fabric headband Replacement o-rings for kits #770 248 (5 per pkg) Comfort cushion 216331 223454 235628 235630 216337 216326 216335 235629 770248 770249 079975 216336 Analog Digital 231415231415 231419231419 231418231418 260087260087 231410231410 -256467 231412231412 231411231411 231572231572 231573231573 231574231574 231576231576 - 256174 770248256178 770249770249 079975079975 216336 - 231413 256729 - MILLER® MLR/2782 Welding Protection Weld-Mask™ AUTO-DARKENING GOGGLES •Uniquely designed auto-darkening welding goggles with face shield and head cover provide alternative protection for specialized welding applications •Ideal for maintenance, repair, and installation •Compact design allows users to weld in spaces where access with traditional welding helmets is limited •Lightweight design virtually eliminates neck strain •Ideal alternative for cutting glasses for use with plasma cutters •Eye covering fits tightly to the face to block out light for precision welding in bright surroundings •Face shield and head cover provide coverage for UV/IR rays and applications with limited spatter •Goggles feature shades 5, 7, 9, 11, and 13 (light state shade 3) Part No. 267370. Part No. 267422, Guard, face. Part No. 267420, Cover, lens. Part No. 270053, Band, head. Part No. 267421, Cover, head front. HELMET BIB •Attaches to bottom of the helmet with hookand-loop fasteners for added neck coverage Part No. 253882. HEADGEAR •Extensive adjustability settings and a pivoting top for better fit and comfort •Fits any helmet in the Arc Armor® line Part No. 256174. SLOTTED HARD HAT ADAPTER HARD HAT ADAPTER •Compatible with Fibre Metal and MSA hats. Other brands may fit depending on size and shape. Part No. 213110, XL and XLi. Part No. 222003, All other Miller Series. •Compatible with most slotted hard hats Part No. 259637. Helmet and hat not included. HELMET HOOK •Holds welding helmets, grinding shields or other helmets with a headgear. Silicone strap secures the helmet in place Part No. 251018. 2x4 AUTO-DARKENING LENS •Fits all 2x4-inch windows •Solar powered, two arc sensors •Light state shade 3 •Two-year warranty Part No. 770660, Shade 8. Part No. 770659, Shade 9. Part No. 770226, Shade 10. JOBSITE TOOL BAG •Over twenty separate pockets •Opening of 12” x 18.5” (305 x 470 mm) Part No. 228028. Helmet and hat not included. PROTECTION PAKS Starter Pak Includes #251 292 Classic VS helmet and Classic Cloth jacket Part No. 255848, Large. Part No. 255850, X-Large. Part No. 255851, 2X-Large. Performance Pak Includes #256 159 Performance helmet and Indura® Cloth jacket Part No. 240886, Large. Part No. 240887, X-Large. Part No. 240888, 2X-Large. WELDING CAPS •Caps are reversible with a low, soft bill •Miller® logos design Part No. 258322, Size 7. Part No. 258323, Size 7â…›. Part No. 258325, Size 7¼. Part No. 258326, Size 7â…œ. Part No. 258327, Size 7½. Part No. 258328, Size 7¾. www.greggdistributors.ca SP04-41 MILLER® MLR/2782 Welding Protection LEATHER JACKET •Top grain leather •Expandable leather strategically placed for optimal mobility •Flame-resistant inside cuff •Satin lined •Tapered, athletic cut Part No. 231088 231089 231090 231091 231092 231093 231094 231095 Size 247114 247115 247116 247117 247118 247119 247120 247121 Indura® CLOTH JACKET - MEN’S & WOMEN’S • Indura® flame-resistant cotton (flame resistance guaranteed for life of jacket) •Nomex® flame-resistant thread Size CLASSIC CLOTH CAPE SLEEVES •9-ounce flame-resistant navy cotton •Fold-in sleeve snaps •Allows for bib attachment (sold separately) Part No. Size Small Medium Large X-Large 2X-Large 3X-Large 4X-Large 5X-Large CLASSIC CLOTH APRON •35” length with accessible front pocket •Adjustable drawstring ensures a good fit Part No. 247149. Size Small Medium Large X-Large 2X-Large 3X-Large 4X-Large 5X-Large •9-ounce flame-resistant navy cotton •Pre-shrunk fabric •Foldin sleeve snaps •Finished hems and reinforced stitching Part No. Size Part No. Size Small Medium Large X-Large 2X-Large 3X-Large 4X-Large 5X-Large WeldX™ CAPE SLEEVES •7-ounce WeldX front and flame-resistant navy cotton back •Fold-in sleeve snaps •Allows for bib attachment (sold separately) 247122 247123 247124 247126 247127 247128 247130 247131 CLASSIC CLOTH LAB COAT •40” length •9-ounce flameresistant navy cotton •Fold-in sleeve snaps •Finished hems and reinforced stitching 252000 252001 252002 •Indura® flame-resistant cotton (flame resistance guaranteed for life of jacket) •Top grain leather •Allows for patented bib/ apron attachment Part No. Small Medium Large X-Large 2X-Large 3X-Large 4X-Large 5X-Large Part No. COMBO JACKET 231080 231081 231082 231083 231084 231085 231086 231087 CLASSIC CLOTH JACKET 244749 244750 244751 244752 244754 244755 244756 244758 258095264379Small 258097264380Medium 258098264381Large 258099264382X-Large 2581002643832X-Large 3X-Large 258101— 258102— 4X-Large 258104— 5X-Large 247138 247139 247140 247142 247143 247144 247145 247146 •Lightweight exclusive material with extreme flame-resistant properties •7-ounce WeldX front and flame-resistant navy cotton back •Vented back/extended rear tail •Zipper closure with hook-and-loop fastened flap •Chromium free Part No. Small Medium Large X-Large 2X-Large 3X-Large 4X-Large 5X-Large Men's Women's Part No. Part No. WeldX™ JACKET Size Small Medium Large X-Large 2X-Large 3X-Large 4X-Large 5X-Large WeldX™ APRON •35” length with accessible front pocket •Adjustable drawstring ensures a good fit Part No. 247134. Size Large X-Large 2X-Large BIB/APRON WeldX™ BIB CLASSIC CLOTH BIB WeldX™ SLEEVES CLASSIC CLOTH SLEEVES COMBO SLEEVES •Attaches to Indura® Cloth and Combo Jackets •19” length •Attaches to cape sleeves with snaps across the chest as a bib or along Part No. 247133. the bottom as an apron Part No. 231125. •18” length •Fold-in sleeve snaps •Onehanded cinch closure Part No. 247137. SP04-42 GREGG DISTRIBUTORS LTD. •18” length •Fold-in sleeve snaps •Onehanded cinch closure Part No. 247148. •19” length •Attaches to cape sleeves Part No. 247147. •Indura® flame-resistant cotton/top grain leather • 21” (533 mm) length Part No. 231096. MILLER® MLR/2782 Welding Protection PERFORMANCE WELDING GLOVES Unprecedented comfort and performance, redefining the welding glove industry. Three-dimensional pattern, select-grade leather and precision craftsmanship with unique design features for specific welding applications. Exceptional dexterity and flexibility. Extra Heavy-Duty MIG/Stick • An industry first! Silicone patches on back for heat and spatter protection •Multi-layered insulated palm and back •Dual-padded, pig grain palm for added comfort Part No. 263350, Large. Part No. 263351, X-Large. Heavy-Duty MIG/Stick (Long Cuff) •Padded forearm for additional protection and comfort •Triple-layered insulated back •Strategically placed patches on pig grain palm and cow split back for extended glove life Part No. 263342, X-Large. Heavy-Duty MIG/Stick •Strategically placed patches on palm and back for extended glove life •Double-layered insulated palm and back •Pig grain leather palm provides extreme durability and protection Part No. 263339, Large. Part No. 263340, X-Large. Part No. 269615, 2X-Large. MIG/Stick •Dual-padded palm for added comfort •Wool back provides ultimate insulation •Cow split leather provides extreme durability and protection Part No. 263343, Large. Part No. 263344, X-Large. Part No. 269616, 2X-Large. MIG (Lined) •Dual-padded palm •Fleece insulated palm, foam insulated back •Cow grain palm, pig split back and goat grain inner fingers provide exceptional dexterity and comfort Part No. 263330, X-Small (Women’s). Part No. 263331, Small (Women’s). Part No. 263332, Medium. Part No. 263333, Large. Part No. 263334, X-Large. MIG (Unlined) •Unlined palm for heightened feel and dexterity •Double-layer insulated back and dual-padded palm for added comfort •Cow grain palm, cow split back and goat grain inner fingers provide exceptional dexterity and comfort Part No. 263335, Medium. Part No. 263336, Large. Part No. 263337, X-Large. Part No. 269619, 2X-Large. TIG •Completely unlined for heightened feel and dexterity •Triple-padded palm for added comfort •Goat grain leather offers superior flexibility and dexterity Part No. 263345, X-Small (Women’s). Part No. 263346, Small (Women’s). Part No. 263347, Medium. Part No. 263348, Large. Part No. 263349, X-Large. TIG/Multitask •Dual-padded palm for added comfort •Wool back provides ultimate insulation •Goat grain leather offers superior flexibility and dexterity Part No. 263352, Small. Part No. 263353, Medium. Part No. 263354, Large. Part No. 263355, X-Large. Metalworker •Durable top grain leather and spandex back for enhanced durability and dexterity •Neoprene wrist with hook-and-loop closure increases fit and support •Padded, reinforced palm and thumb saddle for extended wear Part No. 251066, Medium. Part No. 251067, Large. Part No. 251068, X-Large. Work •Dual-padded palm for added durability •Fleece back provides ultimate insulation •Cow grain leather offers superior durability and abrasion resistance Part No. 266041, Medium. Part No. 266042, Large. Part No. 266043, X-Large. CLASSIC WELDING GLOVES Standard fit and materials for the value-minded welder. Heavy-Duty MIG/Stick •Durable side-split cowhide •Aluminized insulation reflects radiant heat •Reinforced palm heightens support and durability Part No. 249193, Large. Part No. 249194, X-Large. MIG (Long Cuff) •Extra long 9” cuff for increased forearm protection •Durable side-split cowhide •Moisturewicking cotton fleece lining Part No. 249198, X-Large. MIG •Durable side-split cowhide •Moisture-wicking cotton fleece lining •Thumb reinforcement straps increase support and durability Part No. 249195, Large. Part No. 249196, X-Large. TIG •Unlined pigskin palm offers superior dexterity and wear •Durable side-split cowhide •Reinforced palm heightens support and durability Part No. 249199, Large. Part No. 249200, X-Large. www.greggdistributors.ca SP04-43 MILLER® MLR/2781 Workstations S-Series ArcStation™ •The S-Series is perfect for the welder who needs a tough workbench for the fab shop or the home garage. •Four S-Series models available, depending on your needs: 30S (30 x 30 inch with solid tabletop), 30SX (30 x 30 inch with X-pattern tabletop), 60S (30 x 60 inch with solid tabletop), or 60SX (30 x 60 inch with X-pattern and solid tabletop combo) •SX model includes X-pattern tabletop for troublefree clamping! •Durable 1/8” steel frame with cross bar and heavy-duty tabletops provide a sturdy area for welding or metalworking •Lower shelf provides a convenient place to store equipment, tools and raw materials •Adjustable leveling feet keep bench rock-steady •Customize with a wide range of handy accessories to make this the ultimate workbench Part No. 951167, 30S. Part No. 951168, 30SX. Part No. 951169, 60S. Part No. 951170, 60SX. Part No. 951413, 60SX Fully Loaded. Includes 60SX workbench, X-clamps, Side shelf, Tool chest with ball-bearing slides, Interior shelf, Quick-remove vise, Weld curtain, Casters, Gun holder, Tool holder, and Clamp bar. Part No. 300613, 6” X-clamps Part No. 300850, 5” X-clamps Part No. 300680, Side shelf Part No. 300610, Tool chest with ball-bearing slides Part No. 300679, Interior shelf Part No. 300611, 5” Quick-remove vise and mount Part No. 300612, Quick-remove Mount only Part No. 300685, 30S series Weld curtain Part No. 300686, 60S series Weld curtain Part No. 300849, Casters Part No. 300614, Convenience kit includes the following: Gun holder, Tool holder, and Clamp bar. F-Series ArcStation™ •When portability or space-savings is a concern, the F-Series ArcStation is your solution •Wheels, handle, and fold-up design make unit easy to take to the jobsite or move around the shop •Compact size makes storing unit a breeze. Unit folds down to 6” x 29” x 48” (152 x 737 x 1219 mm). •30” x 30” size tabletop provides plenty of work surface •3/16” X-pattern steel tabletop allows troublefree clamping •1.5” diameter steel tube frame provides strength and durability •Includes removable gun holder •Add the optional 5” X-clamps (#300850) to make this the ultimate portable workbench Part No. 300837, 30FX. Part No. 300850, 5” X-clamps. Features 30FX 30S 30SX 60S Steel Top (1) 29 x 29 x 3/16” X-pattern (1) 29 x 29 x 3/16” solid (1) 29 x 29 x 3/8” X-pattern (2) 29 x 29 x 3/16” solid Load Capacity 500 lb. (227 kg) 1,000 lb. (454 kg) 1,000 lb. (454 kg) 1,000 lb. (454 kg) Dimensions 35” x 29” x 35” 35” x 29” x 29” 35” x 29” x 29” 35” x 58” x 29” (889 x 737 x 889 mm) (889 x 737 x 737 mm) (889 x 737 x 737 mm) (889 x 1,473 x 737 mm) Weight 74 lb. (34 kg) 123 lb. (56 kg) 177 lb. (80 kg) 230 lb. (104 kg) SP04-44 GREGG DISTRIBUTORS LTD. 60SX 60SX Fully Loaded (1) 29 x 29 x 3/8” solid (1) 29 x 29 x 3/8” X-pattern 1,000 lb. (454 kg) 35” x 58” x 29” (889 x 1,473 x 737 mm) 318 lb. (144 kg) MILLER® MLR/2784 MIG Welding Guns Bernard™ AIR-COOLED MIG GUNS Part No. Amperage Q3015AE8CLC Cable Length Handle & Trigger Neck Contact Tip 300 amp Wire Size Power Pin 0.035” (0.9 mm) Lincoln Q3015AE8CMC 0.035” (0.9 mm) Miller Q3015AE8ELC 0.045” (1.2 mm) Lincoln Q3015AE8EMC 0.045” (1.2 mm) Miller Q4015AE8CLC 400 amp 15 ft. (4.57 m) Standard Trigger B Series Small Curved Handle 45° Rotatable, Medium Centerfire 0.035” (0.9 mm) Lincoln Q4015AE8CMC 0.035” (0.9 mm) Miller Q4015AE8ELC 0.045” (1.2 mm) Lincoln Q4015AE8EMC 0.045” (1.2 mm) Miller Bernard™ CONSUMABLES Part No. 4423R, Insulator Cap. Part No. QJL-2330, .023 - .030 Jump Liner. Part No. QJL-3545, .035 - .045 Jump Liner. Part No. QT2-60, Pipeworx Neck. Part No. QT3-45, Bernard Neck. LINERS FOR Bernard™ 300, 400 & 500 Amp Best of the Best MIG Guns Universal Conventional Liner 15 ft. (4.57m) Part No. L1A-15 L3A-15* L4A-15 L6A-15 L7A-15 L8A-15 Wire Size .023-.030" .035-.045" .045-1/16" 5/64-3/32" 3/32-7/64" 7/64 - 1/8" Liner Colour Yellow White Red Blue Grey Black Aluminum/Soft Wire Liners 15 ft. (4.57m) Gun Wire Size Part No. Amperage 1920343 .035 (.9 mm) 150A 600A Nylon 200A-600A Steel 43115X 3/64 (1.2 mm) 200A-600A Nylon 1920344 200A-600A Steel 44215X 1/16 (1.6 mm) 200A-600A Nylon 1920345 200A-600A Steel Liner Universal Conventional Liner Centerfire™ CONSUMABLE SERIES 300, 400 & 500 Amp Best of the Best MIG Guns Small Centerfire™ Gas Diffusers and Nozzles Part No. T-023, .023” (0.6 mm) 'T' Series Tip. Part No. T-030, .030” (0.8 mm) 'T' Series Tip. Part No. T-035, .035” (0.9 mm) 'T' Series Tip. Part No. T-039, .039” (1.0 mm) 'T' Series Tip. Part No. T-045, .045” (1.2 mm) 'T' Series Tip. Part No. T-052, .052” (1.4 mm) 'T' Series Tip. Part No. T-062, 1/16” (1.6 mm) 'T' Series Tip. Part No. T-072, .072” (1.8 mm) 'T' Series Tip. Part No. T-078, 5/64” (2.0 mm) 'T' Series Tip. Part No. T-094, 3/32” (2.4 mm) 'T' Series Tip. Part No. T-109, 7/64” (2.8 mm) 'T' Series Tip. Part No. T-125, 1/8” (3.2 mm) 'T' Series Tip. Part No. NS-5800C, 5/8” I.D., Flush, Copper. Part No. NS-5818C, 5/8” I.D., 1/8” Rec., Copper. Part No. NS-5800B, 5/8” I.D., Flush, Brass. Part No. NS-5818B, 5/8” I.D., 1/8” Rec., Brass. Part No. NS-1218C, 1/2” I.D., 1/8” Rec., Copper. Part No. NS-1200B, 1/2” I.D., Flush, Brass. Part No. NS-1218B, 1/2” I.D., 1/8” Rec., Brass. Part No. NST-3800B, 3/8” I.D., Flush, Brass. Part No. NST-3818B, 3/8” I.D., 1/8” Rec., Brass. Part No. NST-38XTB, 3/8” I.D., 1/8” Extension, Brass. Part No. 4323R, Nozzle Insulator. Part No. DS-1, Gas Diffuser. Part No. NS-FLX, Self-Shielded Conversion Kit (Includes tip holder and both insulators). Large Centerfire™ Gas Diffusers and Nozzles Part No. TT-023, .023” (0.6 mm) 'TT' Series Tapered Tip. Part No. TT-030, .030” (0.8 mm) 'TT' Series Tapered Tip. Part No. TT-052, .052” (1.4 mm) 'TT' Series Tapered Tip. Part No. TT-062, 1/16” (1.6 mm)'TT' Series Tapered Tip. Part No. TT-035, .035” (0.9 mm) 'TT' Series Tapered Tip. Part No. TT-045, .045” (1.2 mm) 'TT' Series Tapered Tip. Part No. TT-039, .039” (1.0 mm) 'TT' Series Tapered Tip. Part No. N-3400C, 3/4” I.D., Flush, Copper. Part No. N-3418C, 3/4” I.D., 1/8” Rec., Copper. Part No. N-3414C, 3/4” I.D., 1/4” Rec., Copper. Part No. N-3418B, 3/4” I.D., 1/8” Rec., Brass. Part No. N-5800C, 5/8” I.D., Flush, Copper. Part No. N-5818C, 5/8” I.D., 1/8” Rec., Copper. Part No. N-5814C, 5/8” I.D., 1/4” Rec., Copper. Part No. N-5818B, 5/8” I.D., 1/8” Rec., Brass. Part No. N-5814B, 5/8” I.D., 1/4” Rec., Brass. Part No. NT-3800C, 3/8” I.D., Flush, Copper. Part No. 10012, Insulator Nozzle. Part No. D-1, Gas Diffuser. www.greggdistributors.ca SP04-45 MILLER® MLR/2784 MIG Welding Guns MIG WELDING GUNS MIGmatic™ M-Series guns are an ideal match for Miller® integrated MIG packages and other Miller wire feeders. Model Part No. M‑100 248282 M‑150 249039 249040 249041 M‑25 169594 169596 1948053 169598 169599 Length 10 ft (3 m) 10 ft (3 m) 12 ft (3.7 m) 15 ft (4.6 m) 10 ft (3 m) 12 ft (3.7 m) 12 ft (3.7 m) 15 ft (4.6 m) 15 ft (4.6 m) Rating and Duty Cycle (CO2)1 M-100 Wire Size 100 A at 100% Duty Cycle .030 – .035” (0.8 – 0.9 mm) 150 A at 100% Duty Cycle .030 – .035” (0.8 – 0.9 mm) M-150 250 A at 100% Duty Cycle .030 – .035” (0.8 – 0.9 mm) 250 A at 100% Duty Cycle .035 – .045” (0.9 – 1.2 mm) M-25 60% with mixed gases 3 #194805 is an M‑25 gun with friction lugs for the Hobart Beta‑MIG 2510. 1 M‑100 can be used on: •SideKick™ •SideKick™ XL/Cricket® XL/Millermatic® 90 •Millermatic® 130 •Millermatic® 130 XP •Millermatic® 135/140s/175/180s/DVI™s /211 •Millermatic® Challenger™ •Millermatic® Challenger™ 172 •Millermatic® Passport™/Passport™ Plus •Millermatic® 141 •Millermatic® 190 M‑150 can be used on: •SideKick™ XL/Cricket® XL/Millermatic® 90 •Millermatic® 120/150 •Millermatic® 130 •Millermatic® 130 XP •Millermatic® 135/140s/175/180s/DVI™s /211 •Millermatic® Challenger™ •Millermatic® Challenger™ 172 •Millermatic® 185 •Millermatic® Pulser M‑25 can be used on: •Millermatic® 200 •Millermatic® 210/212/250x/251/252 •Millermatic® 250 •Millermatic® Vintage •Millermatic® Reach Wire Feeder M‑100/M‑150 SERVICE PARTS/ CONSUMABLES M‑25 SERVICE PARTS/ CONSUMABLES OPTIONAL M‑SERIES GUN NOZZLES & TIPS Part No. 246372, Nozzle, slip type, .500 (12.7 mm) orf flush. Part No. 226190, Nozzle, slip type, flux cored. Part No. 087299, Tip, contact scr, .023 (0.6 mm) wire x 1.125. Part No. 000067, Tip, contact scr, .030 (0.8 mm) wire x 1.125. Part No. 000068, Tip, contact scr, .035 (0.9 mm) wire x 1.125. Part No. 000069, Tip, contact scr, .045 (1.2 mm) wire x 1.125. Part No. 194010, Kit, liner monocoil .023/.025 (0.6 mm) wire x 15 ft. Part No. 194011, Kit, liner monocoil .030 – .035 (0.8 – 0.9 mm) wire x 15 ft. Part No. 194012, Kit, liner monocoil .035 – .045 (0.9 –1.2 mm) wire x 15 ft. M‑10/M‑15 SERVICE PARTS/ CONSUMABLES Part No. 169715, Nozzle, slip type, .500 (12.7 mm) orf flush. Part No. 169716, Adapter, contact tip. Part No. 169724, Nozzle, slip type, .500 (12.7 mm) orf .125 recess. Part No. 169725, Nozzle, slip type, .625 (15.9 mm) orf .125 recess. Part No. 200258, Nozzle, slip type, .500 (12.7 mm) orf flush. Part No. 169726*, Nozzle, slip type, .625 (15.9 mm) orf flush. Part No. 169727, Nozzle, slip type, .625 (15.9 mm) orf .125 stickout. Part No. 172034, Tip, contact scr 3/64 (1.19 mm) wire x 1.125. Part No. 169728, Adapter, contact tip. Part No. 169729, Adapter, nozzle. Part No. 194010, Kit, liner monocoil .023/.025 (0.6 mm) wire x 15 ft. Part No. 194011, Kit, liner monocoil .030 – .035 (0.8 – 0.9 mm) wire x 15 f. Part No. 194012, Kit, liner monocoil .035 – .045 (0.9 – 1.2 mm) wire x 15 ft. Part No. 194014, Kit, liner monocoil 3/64 (1.19 mm) aluminum wire x 15 ft. Roughneck® SCREW-ON NOZZLES Part No. 209035, Copper, 3/8” orifice tapered. Part No. 207313, Copper, 5/8” orifice, 15/16” O.D. Part No. 199614, Brass, heavy duty 5/8” orifice. Part No. 199618, Copper, heavy duty 5/8” orifice. Part No. 199612, Brass heavy duty 3/4” orifice. M-SERIES CONSUMABLE KITS Part No. 199617, Copper heavy duty 3/4” orifice. To better serve you, Miller has introduced six improved, affordable MIG consumable kits that are compatible with the M- Part No. 199610, Brass standard 1/2” orifice. Part No. 199615, Copper standard 1/2” orifice. Series guns. Each kit contains consumables that are specific Part No. 209036, Copper, 1/2” orifice tapered. to your welding application, including gun type and wire size. Part No. 199613, Brass, standard 5/8” orifice. Part No. 198855, Copper, standard 5/8” orifice. Consumable kits contain 10 contact tips, nozzle, and contact Part No. 199611, Brass, standard 3/4” orifice. tip adapter. Part No. 199616, Copper, standard 3/4” orifice. Part No. 234607, M-10/15, M-100/150 Gun, .023” Wire. Part No. 234608, M-10/15, M-100/150 Gun, .030” Wire. Part No. 234609, M-10/15, M-100/150 Gun, .035” Wire. Consumable kits contain 10 contact tips, nozzle, contact tip adapter, and nozzle adapter. Part No. 234610, M-25 Gun, .030” Wire. Part No. 234611, M-25 Gun, .035” Wire. Part No. 234612, M-25 Gun, .045” Wire. SP04-46 GREGG DISTRIBUTORS LTD. M‑25 and M‑40 Tapered Nozzles Part No. 176243, Nozzle, Tapered 3/8” (9.5 mm). Part No. 178386, Nozzle, Tapered 11/32” (8.7 mm). M‑25 and M‑40 Tapered Contact Tips (1/4” OD x 1.312”) Part No. 176797, Contact Tip, Tapered .030” (0.8 mm). Part No. 176793, Contact Tip, Tapered .035” (0.9 mm). Part No. 176794, Contact Tip, Tapered .045” (1.2 mm). M‑25 and M‑40 Heavy‑Duty Spray Contact Tips (5/16” OD x 1.125”) Part No. 187117, Contact Tip, Heavy Duty .035” (0.9 mm). Part No. 187118, Contact Tip, Heavy Duty .045” (1.2 mm). MILLER® MLR/2784 MIG Welding Guns XR-Aluma-Pro Lite XR-Aluma-Pro and all Pistol models •XR-Aluma-Pro and XR-Pistol guns work in conjunction with XR-Controls, XR-AlumaFeed or select Millermatic machines to provide the best solution for push-pull applications •Threaded quick-change 360° rotatable head tubes are available in different bends and lengths for even those hard-to-reach welds. Over 30 different styles to fit your application and welder’s preference. •Wire tension settings (except XR-Pistol). 4000 or 5000- specific tension settings ensure the very best wire feeding performance and arc consistency •Heavy-duty construction. All internal components are designed to provide long lasting performance and feeding precision XR- Aluma-Pro™ Lite: •Lightest weight gooseneck-style gun features rear trigger that allows access to hard-to-reach welds XR-Aluma-Pro™: •Robust professional-grade gun has the highest duty cycle rating in its class. •Easy access to drive assembly and removable toolless head tube reduce service time, by allowing a simple means of changing drive rolls and head tube — or performing routine maintenance without disassembly of gun XR™-Pistol: •Reliable, cost-effective gun for light- to medium industrial applications XR™-Pistol-Pro: •Exceptional aluminum welding results for heavy-industrial applications •Most durable motor and drive design improves feedability and arc consistency while helping reduce downtime and maintenance costs •Easy access to drive assembly and removable toolless head tube reduce service time, by allowing a simple means of changing drive rolls and head tube — or performing routine maintenance without disassembly of gun Processes: • MIG (GMAW) with aluminum wire (capable of other wires with optional hardwire kits) • Pulsed MIG (GMAW-P) with optional pulsing power source XR™ PUSH-PULL GUNS XR-Aluma-Pro XR-Pistol-Pro Model No. Gun & Cable Length Part No. 15-ft. (4.6 m) 25-ft. (7.6 m) 30-ft. (9 m) 35-ft. (10.6 m) Welding Current Rating XR-Aluma-Pro Lite — 300948 — — 175 A at 60% duty cycle (Air-cooled) XR-Aluma-Pro 300000 300001 — 300264 300 A at 100% duty cycle (Air-cooled) 300264002* XR-Aluma-Pro 300003 300004 — 300265 400 A at 100% duty cycle (Water-cooled) XR-Pistol 198127 — 198128 — 200 A at 100% duty cycle (Air-cooled) XR-Pistol 198129 — 198130 — 400 A at 100% duty cycle (Water-cooled) XR-Pistol-Pro 300782 300783 — 300784 200 A at 100% duty cycle (Air-cooled) XR-Pistol-Pro 300786 300787 — 300788 400 A at 100% duty cycle (Water-cooled) *Comes with remote. Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. XR™-Aluma-Pro™ CONSUMABLES Wire Feed Speed Wire Type and Diameter Capacity 70–900 IPM (1.8–23 m/min.) 70–900 IPM (1.8–23 m/min.) 70–900 IPM (1.8–23 m/min.) 70–875 IPM (1.8–22.2 m/min.) 70–875 IPM (1.8–22.2 m/min.) 70–900 IPM (1.8–23 m/min.) 70–900 IPM (1.8–23 m/min.) 4”H x 1.9”W x 15”L Aluminum (102 mm x 48 mm x .030 –.047” (0.8–1.2 mm) 381 mm) 5”H x 2.5”W x Aluminum .030 –.052” (0.8–1.3 mm) 17”L (127 mm x 64 mm x 432 Aluminum .030 –.052” (0.8–1.3 mm) mm) Aluminum .030 –1/16” (0.8–1.6 mm) Aluminum 7.4”H x 1.9”W x .030 –1/16” (0.8–1.6 mm) 10.6”L (187 mm x Aluminum 48 mm x 270 mm) .030 –.052” (0.8–1.3 mm) Aluminum .030 –.052” (0.8–1.3 mm) Dimensions Net Weight (Gun only) 2.0 lb. (0.9 kg) 2.5 lb. (1.1 kg) 2.9 lb. (1.3 kg) 2.2 lb. (1 kg) 2.4 lb. (1.1 kg) 2.2 lb. (1 kg) 2.4 lb. (1.1 kg) SUGGESTED POWER SOURCES •Millermatic® 252 •Millermatic® 350P/350P Aluminum These power sources require XR-AlumaFeed or XR-Control •Deltaweld® Series •Invision™ MPa •AlumaPower™ MPa •XMT® Series (except VS model) •Trailblazer® Series XR™-Aluma-Pro LITE Part No. 206186, .030-.035” (0.8-0.9 mm) FasTip Contact Tip. CONSUMABLES Part No. 206187, .035-.040” (0.9-1.0 mm) FasTip Contact Tip. Part No. 254477, Head Tube Assembly. Part No. 206188, .040-.045” (1.0-1.2 mm) FasTip Contact Tip. Part No. 258541, Kit, Jump Liner Assy .030-.035 (5 pk). Part No. 206189, 3/64-.052” (1.2-1.3 mm) FasTip Contact Tip. Part No. 258542, Kit, Jump Liner Assy .047-.062 (5 pk). Part No. 206190, 1/16” (1.6 mm) FasTip Contact Tip. Part No. 258726, Kit, Jump Liner Assy .030-.035 14” Long Part No. 206191, 1/16-.068” (1.6-1.7 mm) FasTip Contact Tip. (5 pk). Part No. 209026, .030-.035” (0.8-0.9 mm) Tapered FasTip Part No. 258727, Kit, Jump Liner Assy .047-.062 14” Long Contact Tip. (5 pk). Part No. 209027, .035-.045” (0.9-1.2 mm) Tapered FasTip Part No. QT2-45, Tube, Body 45° x 2.69 Large. Contact Tip. Part No. T-035AL, Centerfire Contact Tip, Aluminum .035. Part No. 209029, .052” (1.3 mm) Tapered FasTip Contact Tip. Part No. T-047AL, Contact Tip, Centerfire .047 Aluminum. Part No. 229887, 15 ft (4.6 m) Cable Liner. Part No. 229891, 25 ft (7.6 m) Cable Liner. Part No. 233999, Long Cable Liner. Part No. 233998, Short Cable Liner. Part No. 227158, Head Tube Short Part No. 229672, Head Tube Long Part No. 227159, Insulating Jacket, short. Part No. 229673, Insulating Jacket, long. Part No. 227161, 4” (102 mm) Teflon Air-Cooled Head Tube Liner Short Barrel, .030” (0.8 mm) to .035” (0.9 mm). Part No. 230239, 4” (102 mm) Teflon Air-Cooled Head Tube Liner Short Barrel, .047” (1.2 mm) to .062” (1.6 mm). Part No. 229674, 6” (152 mm) Teflon Air/Water Cooled Head Tube Liner Long Barrel, .030” (0.8 mm) to .035” (0.9 mm). Part No. 229431, 6” (152 mm) Teflon Air/Water Cooled Head Tube Liner Long Barrel, .047” (1.2 mm) to .062” (1.6 mm). Part No. 227408, Inlet Guide. Part No. 227416, Insulator Ring Rear. Part No. 227434, Drive Roll. Part No. 227439, .035” (0.9 mm) to .052” (1.3 mm) Idler Roll. Part No. 230710, .062” (1.6 mm) Idler Roll. Part No. 231519, Air-Cooled Assembly Kit Short Barrel, 4” (102 mm). Part No. 231518, Air-Cooled Assembly Kit Long Barrel, 6” (152 mm). XR™-Pistol Pro Plus CONSUMABLES Air-cooled parts breakdown shown. Part No. 258474, Kit, Head Tube Assy (Air) AP/PP 180 Degree 4” Lg Cntrfr. Part No. N-5818C, Nozzle, C-Fire Large Copper 5/8” Recess 1/8”. Part No. T-047AL, Contact Tip, Centerfire .047 Aluminum. Part No. D-1AP, Diffuser, Centerfire-D-1AP. Part No. 232284, Insulator, Nozzle Collared Diffuser (For 180°/ Straight Only). Part No. 227168, Nut, Head Tube Rotation. Part No. 230969, Kit, Replacement - Rings Head Tube Air. Part No. M1442, Liner, Teflon .047-.062 Wire Soft Pro/Plus. Part No. 227408, Inlet Guide. Part No. 227416, Insulator Ring Rear. Part No. 227434, Drive Roll. Part No. 229673, Insulating Jacket, long. Part No. T-035AL, Centerfire Contact Tip, Aluminum .035. XR™-Pistol Pro CONSUMABLES Air-cooled parts breakdown shown. Part No. 255716, Kit, Head Tube Assy (Air) AP/PP 180° 4”. Part No. 198855, Nozzle, Copper 5/8”. Part No. 206189, Tip, Fastip .312 Od .052 And 3/64 Al Wires. Part No. 229670, Diffuser, .281/.312 Od Collar Fastip 1/8 Rec Aluma. Part No. 232284, Insulator, Nozzle Collared. Part No. 227168, Nut, Head Tube Rotation. Part No. M1273, Liner, Teflon .047-.062 Wire Pistol Pro. Part No. 230969, Kit, Replacement O-Rings Head Tube Air. XR™-Aluma-Pro Plus™ CONSUMABLES Part No. 229887, 15 ft (4.6 m) Cable Liner. Part No. 229891, 25 ft (7.6 m) Cable Liner. Part No. 233999, Long Cable Liner. Part No. 233998, Short Cable Liner. www.greggdistributors.ca SP04-47 MILLER® MLR/2784 MIG Spool Guns Spoolmatic® SPOOL GUNS •Portable, aluminum wire feed system for industrial applications •Integrated spool canister rotates 180° for operator flexibility and comfort •Available in 15 or 30 ft. cable lengths, providing flexibility to be used in the shop and in the field •Two-stage trigger with built-in gas valve allows for gas preflow, and eliminates the need to purge long gas lines •Wire feed speed adjustment on the gun handle and reversible drive rolls save time and money •Quick-change, single-turn contact tip provides excellent performance and is easy to replace Spoolmatic •Cost-effective, industrial aluminum spool gun. Processes: • MIG (GMAW) with aluminum and other soft alloy wires •MIG (GMAW) with hard wires • Pulsed MIG (GMAW-P) with optional pulsing power source Part No. 195156, 15 ft. (4.5 m) cable. Part No. 130831, 30 ft. (9 m) cable. Part No. 137546, WC-115A. Part No. 137546-01-1, WC-115A (with contactor). Part No. 137549, WC-24. Spoolmatic Pro •The most reliable, easy-to-use spool gun in the industry for the professional welder •Wire tension settings. 4000 or 5000-specific tension settings ensure the very best wire feeding performance and arc consistency •Most durable motor and drive design improves feedability and arc consistency while helping reduce downtime and maintenance costs •Easy access to drive assembly and removable toolless head tube reduce service time, by allowing a simple means of changing drive rolls and head tube — or performing routine maintenance without disassembly of gun •Easy-to-rotate, self-seating head tube allows for better access into tight spots, preventing leaks and providing excellent current transfer. Head tubes are common with the XR-Aluma-Pro gooseneck-style guns. •Head tube options in several different lengths and bend configurations are available for use when a standard head tube doesn’t fit the application Processes: • MIG (GMAW) with aluminum and other soft alloy wires •MIG (GMAW) with hard wires • Pulsed MIG (GMAW-P) with optional pulsing power source Part No. 301147, 15 ft. (4.5 m) cable. Part No. 301148, 30 ft. (9 m) cable. Part No. 137546, WC-115A. Part No. 137546-01-1, WC-115A (with contactor). Part No. 137549, WC-24. Maximum Spool Size Capacity Spoolmatic 200 A at 100% duty cycle 70– 875 IPM Aluminum* .030 –1/16” (0.8 –1.6 mm) 4” (102 mm) (1.8 – 22.2 m/min.)* Hard Wire .030 –.045” (0.8 –1.1 mm) Spoolmatic 200 A at 100% duty cycle 70– 900 IPM Aluminum* .030 –1/16” (0.8 –1.6 mm) 4” (102 mm) Pro (1.8 – 23 m/min.)* Hard Wire .030 –.045” (0.8 –1.1 mm) Model No. Welding Current Rating Wire Feed Speed *Wire speed dependent on control or Millermatic used Wire Type and Diameter Capacity Net Weight with Gun only 10.25”H x 2.5”W x 2.9 lb. (1.3 kg) 15.2”L (260 mm x 64 mm x 384 mm) 10.75”H x 2.5”W x 3.0 lb. (1.4 kg) 15.4”L (273 mm x 64 mm x 390 mm) Dimensions SUGGESTED POWER SOURCES •Millermatic® 212 Auto-Set™ •Millermatic® 252 •Millermatic® 350P/350P Aluminum (except Spoolmatic Pro) •Shopmate™ 300 DX •Bobcat™ Series — with SGA 100C control These power sources require WC-24 control (#137549) •CP-302 •Deltaweld® Series •Invision™ MPa •AlumaPower™ MPa •Dimension™ Series XMT® Series (except VS model) •Trailblazer® Series Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. SP04-48 GREGG DISTRIBUTORS LTD. MILLER® MLR/2784 MIG Spool Guns Spoolmate™ SPOOL GUNS •Reliable and economical spool guns designed for home hobbyists and light fabricators. Spoolmate 100 •For use with Millermatic 141, 190 and 211, Multimatic 200 and Syncrowave 210 TIG/MIG Complete •Light industrial gun for 4043 series aluminum wire rated at 135 amps at 30% duty cycle •12 ft. direct-connect cable with heavy-duty strain relief provides extended reach and accessibility to your work •Dual V-knurled drive rolls with adjustable tension control for consistent feeding of different types of wire •Clear spool canister protects the wire and allows you to easily see the spool •Includes carrying case, extra contact tips and nozzle Processes: • MIG (GMAW) with aluminum and other soft alloy wires • MIG (GMAW) with hard wires Part No. 300371. Part No. 111400, Hose, SAE .187” ID x .410” OD x 8 ft. Part No. 186404, Gun Tube Assembly. Part No. 186405, Nozzle. Spoolmate 200 •For use with Millermatic 212 and 252 models •Light industrial gun for 4000 or 5000 series aluminum wire rated at 160 amps at 60 percent duty cycle •20 ft. weld/control cables with strain relief and sheath provide extended reach and accessibility to your work •Wire feed speed adjustment on the gun —not the machine—for easy setup •Easy access to drive assembly and drive rolls •Two-stage trigger with built-in gas valve allows for gas preflow and postflow •Toolless head tube removal for easy replacement •Three optional head tubes Processes: • MIG (GMAW) with aluminum and other soft alloy wires • MIG (GMAW) with hard wires Part No. 300497. Part No. 300591, 45° Head Tube. Part No. 300592, 9” Extension Head Tube. Part No. 300593, Heavy-Duty Head Tube. Part No. 195287, Spoolmatic Adaptor Cable. Allows connection to older Millermatic 210 and 212 (non-Auto-Set). Part No. 243385, Gun Tube Assembly. Part No. 243390, Contact Adapter Part No. 186405, Nozzle. Spoolmate 3035 •For use with vintage Millermatic tapped voltage 210 and 212 models. Use with current Millermatic and Bobcat 225 models requires an SGA 100 or 100C control. •Light industrial gun for 4000 or 5000 series aluminum wire rated at 150 amps at 60% duty cycle •20 ft. weld/control cables with strain relief and sheath provide extended reach and accessibility to your work •Light weight and well balanced for operator comfort •Clear spool canister protects the wire and allows you to easily see the spool •Easy-to-remove barrel assembly Processes: • MIG (GMAW) with aluminum and other soft alloy wires • MIG (GMAW) with hard wires Part No. 195016. Part No. 043856, SGA 100. Part No. 043857, SGA 100C. Part No. 195375, Heavy-Duty Head Tube. Part No. 196827, Gun Tube Assembly. Part No. 196848, Contact Adapter. Part No. 197570, Anti-Rotation Pin. Maximum Spool Size Capacity Spoolmate 135 A at 30% duty cycle 5– 625 IPM Aluminum .030 –.035” (0.8 – 0.9 mm) 4” (102 mm) 100 (1.7–15.9 m/min.)* Solid Steel .023 –.035” (0.6 – 0.9 mm) Stainless .023 –.035” (0.6 – 0.9 mm) Spoolmate 160 A at 60% duty cycle, 70– 875 IPM Aluminum .030 –.035” (0.8 – 0.9 mm) 200 200 A at 60% duty cycle with (1.8–22.2 m/min.) Solid Steel .023 –.035” (0.6 – 0.9 mm) optional heavy-duty head tube Stainless .023 –.035” (0.6 – 0.9 mm) Spoolmate 150 A at 60% duty cycle, 115–715 IPM Aluminum .023 –.035” (0.6 – 0.9 mm) 3035 200 A at 60% duty cycle with (2.9 –18.1 m/min.) Solid Steel .023 –.035” (0.6 – 0.9 mm) optional heavy-duty head tube Stainless .023 –.035” (0.6 – 0.9 mm) Model No. Welding Current Rating Wire Feed Speed Wire Type and Diameter Capacity *Wire speed dependent on power source used Net Weight with Cable Assembly 11.5”H x 3”W x 6 lb. (2.7 kg) 13”L (291 mm x (9 lb. (4.1 kg) 76 mm x 330 mm) with case) 9”H x 2.5”W x 11 lb. (5 kg) 14.5”L (229 mm x 64 mm x 368 mm) 11.5”H x 2.25”W x 9.1 lb. (4.1 kg) 8”L (291 mm x 57 mm x 203 mm) Dimensions SUGGESTED POWER SOURCES For Spoolmate 100 •Millermatic® 141 •Millermatic® 190 •Millermatic® 211 Auto-Set™ with MVP™ •Multimatic™ 200 •Syncrowave™ 210 TIG/MIG Complete For Spoolmate 200 • Millermatic® 212 Auto-Set™ •Millermatic® 252 For Spoolmate 3035 •Direct connect to vintage Millermatic 210/212 tapped-voltage models •Millermatic® 141/190/211/212 with SGA 100 control • Bobcat™ 225 with SGA 100C control Spoolmate™ CONSUMABLES Part No. 186406, Contact Tip, .035 M5 x .8 mm Thread. Part No. 186419, Contact Tip, .030 M5 x .8 mm Thread. Part No. 199730, Contact Tip, .023 M5 x .8 mm Thread. Part No. 186409, Gas Diffuser. Part No. 186414, .030” (0.8 mm) to .035” (0.9 mm) V-Knurl Drive Roll. www.greggdistributors.ca SP04-49 MILLER® MLR/2784 Automated MIG Accessories COOLANT FLOW SWITCH For Auto-Axcess. To ensure coolant is flowing in the system. Lack of coolant flow may cause damage to water-cooled guns. Module allows wiring into the peripheral connector port. 50 ft. (15.2 m) cable with connector and separate shell connector for simple modification to desired length in the field. It can be mounted on Auto-Axcess or as desired elsewhere. Quarter-turn quick connection. Part No. 195461. Carts, Cylinder Racks and Running Gear CYLINDER CART UNIVERSAL CART & CYLINDER RACK FEEDER CART DUAL EZ-CHANGE™ LOW CYLINDER RACK WITH ELEVATED GUN & CABLE RACK ELEVATED GUN & CABLE RACK DUAL CYLINDER RACK MIGRunner™ CART RUNNING GEAR CYLINDER THUNDERBOLT XL RACK RUNNING GEAR For Invisions, XMTs, and CST 280. Has adjustable handles and is slanted for convenient access to power source front panel controls. Carries two 160-pound (72.6 kg) gas bottles with feeder mounted to tray above power source. Accommodates Coolmate 3 or 4 coolant system. Part No. 042537. For Millermatic 212 Auto-Set and 252, and Syncrowave 210. Allows operators to easily roll cylinders on and off the rack with no lifting. Gun and cable rack keeps cables off the floor and tangle free. Part No. 300337. For Invisions, AlumaFeed System, and XMTs with single feeders. Small footprint and easily maneuverable, with cylinder rack low enough that you do not have to lift bottles. Durable, heavy-duty ergonomic handles are designed for comfort. Part No. 195445. A low-profile, creeper cart which allows the For Invision 352 MPa, XMT 304/350, CST 280, operator to easily move the feeder around the work area. Diversions, Maxstar 200/280, and Dynasty Part No. 142382. 200/280. Also accommodates single gas cylinder up to 56” (142.2 cm) high measuring 6” to 9” (15.2 to 22.8 cm) in diameter. Provides storage for auxiliary items such as electrodes, helmets and gloves. Part No. 042934. For Millermatic 212 Auto-Set and 252, and Syncrowave 210. For use with single cylinder rack. (Included with Dual EZ-Change Low Cylinder Rack.) Part No. 300335. For Invisions, Axcess 300/450, Dimension 650, and XMTs with single or dual feeders. Holds two large gas cylinders and has gun cable hangers and a consumable drawer in front. A convenient handle allows the cart to be pulled easily through doorways. Power source and single or dual feeders can be mounted to cart and secured. Part No. 300408. SP04-50 GREGG DISTRIBUTORS LTD. For Millermatic 350P and 350P Aluminum. Replaces single cylinder rack. Part No. 195299. Mounts easily to unit and provides convenient portability. Includes two wheels, two feet and a handle. Part No. 043927. RUNNING GEAR/CYLINDER RACK For Millermatic 141, 190, 211 Auto-Set, and Diversions. Heavyduty construction with 8” rubber rear wheels. Convenient front handles, cable holders and plastic consumable box. For gas cylinders no greater than 7” (178 mm) in diameter or 65 pounds (29.5 kg) in weight. Part No. 301239. STANDARD RUNNING GEAR & CYLINDER RACK For CP-302, Deltawelds, Dimensions, and Gold Stars. Running gear has 10” (254 mm) rear wheels and 5” (127 mm) front casters for excellent mobility on the shop floor. Very easy to install. Handles double as a cable holder. Cylinder rack only installs on Standard Running Gear. Part No. 042886, Running gear. Part No. 042887, Cylinder rack. 2-WHEEL TROLLEY CART For Maxstar/Dynasty 200 with or without Coolmate 1. Easy-to-maneuver two-wheel cart features single-cylinder rack, chain for cylinder, straps (quick and easy to detach and carry machine), cable holders, torch holder, storage area, and filler rod storage area. Part No. 300480. MILLER® MLR/2784 Carts, Cylinder Racks and Running Gear Small Runner™ CART For Maxstar/Dynasty 280 with or without Coolmate 1.3. Cart features single cylinder rack, foot pedal holder, two cable/torch holders and two TIG filler holders. Part No. 300988. Runner™ CART For Maxstar 350/700 and Dynasty 350/700 with or without Coolmate 3.5. Cart features single cylinder rack, foot pedal holder, three cable/ torch holders and two TIG filler holders. Part No. 300244. No. 37 RUNNING GEAR For Syncrowave 250 DX/350 LX. Includes two 10” (254 mm) wheels, two 5” (127 mm) casters, two-compartment rack for gas cylinders, and handles. Provides excellent mobility and easy to install. Part No. 195282. SHOPMATE 300 RUNNING GEAR/DUAL CYLINDER RACK For Shopmate 300 DX. The large 10” (254 mm) rear wheels and 5” (127 mm) front casters on this running gear provide excellent mobility on the shop floor, making it easier to move the power source. Very easy to install. Handles double as a cable holder. Holds two cylinders. Part No. 300145. Please see pg. SP04-02 for more information about the Miller Welding icons and symbols. Coolant Systems Coolmate™ COOLANT SYSTEMS Part No. 300360, Coolmate™ 1. 115 VAC. For Maxstar/Dynasty 200. Light industrial, 1-gallon cooler designed for water-cooled torches on power sources rated up to 200 A*. Part No. 300972, Coolmate™ 1.3. 115 VAC. For Maxstar/Dynasty 280. Light industrial, 1.3-gallon cooler designed for water-cooled torches on power sources rated up to 280 A*. Part No. 043007, Coolmate™ 3. 115 VAC. Economical, 3-gallon cooler designed for water-cooled torches rated up to 500 A*. Part No. 043008, Same as above except 230 VAC. Part No. 300245, Coolmate™ 3.5. 115 VAC. For Maxstar 350/700 and Dynasty 350/700. Industrial, 3.5-gallon cooler designed for water-cooled torches rated up to 600 A*. *May vary with torch design and cable length. Miller coolant systems are backed by the best warranty in the industry — one full year. Motor Input Maximum Current Draw Voltage Coolmate 1 115 VAC, 60 Hz 2.1 A (60 Hz) Coolmate 1.3 115 VAC, 60 Hz 4.7 A (60 Hz) Coolmate 3 115 VAC, 50/60 Hz 5.9 A (50 Hz), 4.7 A (60 Hz) 230 VAC, 50/60 Hz 2.5 A (50 Hz), 3.0 A (60 Hz) Coolmate 3.5 115 VAC, 50/60 Hz 5.9 A (50 Hz), 4.7 A (60 Hz) Coolmate 4 115 VAC, 50/60 Hz 5.9 A (50 Hz), 4.7 A (60 Hz) Model Maximum Cooling Tank IEC Cooling Capacity Capacity Capacity 2850 W (9700 BTU/hr.) 1210 W (4120 BTU/hr.) 1 gal. (3.8 L) 1.8 qt./min. (1.7 L/min.) 1.1 qt./min. (1 L/min.) 3400 W (11,600 BTU/hr.) 1330 W (4540 BTU/hr.) 1.3 gal. (4.9 L) 3.8 qt./min. (3.6 L/min.) 1.1 qt./min. (1 L/min.) 3820 W (13,000 BTU/hr.) 1420 W (4840 BTU/hr.) 3 gal. (11.4 L) 4.2 qt./min. (4.0 L/min.) 1.1 qt./min. (1 L/min.) 4140 W (14,000 BTU/hr.) 1660 W (5660 BTU/hr.) 3.5 gal. (13.2 L) 5.0 qt./min. (4.7 L/min.) 1.1 qt./min. (1 L/min.) 5500 W (18,000 BTU/hr.) 1780 W (6070 BTU/hr.) 4 gal. (15 L) 5.9 qt./min. (5.6 L/min.) 1.1 qt./min. (1 L/min.) Dimensions 8”H x 7.5”W x 23.75”D (203 mm x 191 mm x 603 mm) 11.25”H x 10.38”W x 24”D (286 mm x 264 mm x 610 mm) 13.25”H x 12.25”W x 23.25”D (337 mm x 311 mm x 584 mm) 11.75”H x 15.75”H x 26”D (298 mm x 400 mm x 660 mm) 16.25”H x 15.25”W x 18.75”D (413 mm x 387 mm x 476 mm) Net Weight 25 lb. (11 kg) 43 lb. (20 kg) 40 lb. (18 kg) 64 lb. (29 kg) 38 lb. (17 kg) COOLANT Sold in multiples of four in 1-gallon recyclable plastic bottles. Miller® coolants contain a base of ethylene glycol and deionized water to protect against freezing to -37° Fahrenheit (-38° C) or boiling to 227° Fahrenheit (108° C). Part No. 043810, Low-Conductivity Coolant (clear, pre-mixed). For TIG and MIG applications. NOT for use in pushpull systems or systems where aluminum is in coolant path/circuit. Part No. 043809, Aluminum-Protecting Coolant (green, pre-mixed). Primarily used in push-pull systems where aluminum is in coolant path/circuit and high frequency is NOT used. Engine Drive Accessories CABLE HOLDER For Big Blue 400 and 500 CC, 500 Pro, 700 Duo Pro, 800 Duo Pro, and 800 Duo Air Pak. Part No. 043946. VANDALISM LOCKOUT KIT Lockable hinged steel panels cover and protect name plate gauges and ignition switch (padlock included). Also includes engine compartment door lock and key. Part No. 195118, For Big Blue 400 and 500 CC. Part No. 399802, For Big Blue 500 Pro and 700 Duo Pro. LIFTING EYE For current model Blue Star 185. Part No. 195353. RUNNING GEAR For current model Blue Star 185. Compact and balanced, lightweight wheelbarrow-style running gear provides easy onsite mobility. Part No. 301246. www.greggdistributors.ca SP04-51 MILLER® MLR/2784 Engine Drive Accessories MULTI-TERRAIN RUNNING GEAR OFF-ROAD RUNNING GEAR For Gas/LP Bobcats and Trailblazers. Includes For Gas/LP Bobcats and Trailblazers. Includes four heavy-duty 15” tires and a rugged handle to provide maximum maneuverability. two heavy-duty 15” tires, two 8” rubber swivel Part No. 300909, With inner tubes. casters and a heavy-duty handle. Recommended for all surfaces and applications and is Part No. 300910, With Never Flat™ tires. easy to move around the jobsite. Part No. 300913, With inner tubes. Part No. 300914, With Never Flat™ tires. GAS CYLINDER MOUNTING HOSE & LP TANK ASSEMBLY MOUNTING ASSEMBLY OFF-ROAD RUNNING GEAR with PROTECTIVE CAGE & NEVER FLAT™ TIRES PROTECTIVE CAGE with CABLE HOLDERS REMOTE OIL DRAIN & FILTER KIT ALL-PURPOSE RUNNING GEAR with NEVER FLAT™ TIRES For Gas/LP Bobcats and Trailblazers. Running gear and rugged cage with cable holders protects your investment and is easy to move around the jobsite. Part No. 300912. For Gas Bobcats and Trailblazers. Designed for use with Running Gear, Protective Cage, or by itself. Includes base tray with bottle bracket, vertical support rack and safety chain. Note: Not for use with LP Tank Mounting Assembly. Not recommended for use with Protective Cover. Part No. 300918. For LP Bobcats and Trailblazers. Designed for use with Running Gear, Protective Cage, or by itself. Includes bracket and clamp to mount 33 and 43-pound tanks horizontally, and hose with fittings to converter. Note: Cannot be used with Gas Cylinder Mounting Assembly. Not recommended for use with Protective Cover. Part No. 300917. PROTECTIVE CAGE WITH CABLE HOLDERS GAS CYLINDER MOUNTING FULL KVA ADAPTER CORD For Bobcats, Trailblazers, and Big Blues ASSEMBLY For Diesel Bobcats and Trailblazers. Rugged cage with cable holders protects your investment. Works with Running Gear, Gas Cylinder Mounting Assembly or with trailer. Note: Not for use with Protective Cover. Part No. 195331. For Diesel Bobcats and Trailblazers. Designed for use with Protective Cage, or by itself. Includes base tray with bottle bracket, vertical support rack and safety chain. Note: Not recommended for use with Protective Cover. Part No. 195330. For Gas Bobcats and Trailblazers. Front mount for Kohler engines makes servicing easy when engine drive is mounted in tight spots. Part No. 300923. (except 400 and 500 CC). NEMA 14-50P to NEMA 6-50R. Adapts engine drive 120/240volt plug to common Millermatic and Spectrum 240-volt plug. Part No. 300517. Rugged cage with cable holders protects your investment. Works with Running Gear, Gas Cylinder Mounting Assembly or LP Tank Mounting Assembly. Part No. 300921, For Gas/LP Bobcats and Trailblazers. Part No. 300473, For Trailblazer 302 Air Pak. For Diesel Bobcats and Trailblazers. Includes two heavy-duty 15” tires, two 8” rubber swivel casters and a heavy-duty handle. Recommended for all surfaces and applications and is easy to move around the jobsite. Part No. 300477. SINGLE-PHASE FULL KVA PLUG KIT For Bobcats, Trailblazers, and Big Blues (except 400 and 500 CC). Can be wired for 120 or 240 VAC loads. Part No. 119172. THREE-PHASE FULL KVA PLUG KIT Part No. 165963, For Bobcat 3 Phase. Part No. 254140, For Big Blue 500 Pro, 700 Duo Pro, 800 Duo Pro, and 800 Duo Air Pak. Protective Covers Heavy-duty, water- and mildew-resistant covers protect and maintain the finish of the welder. Part No. 301245, For current model Blue Star 185. Part No. 300919, For current model Gas Bobcats and Trailblazers (except Air Pak) without Protective Cage or Running Gear. Part No. 300920, For current model Gas Bobcats and Trailblazers (except Air Pak) with Protective Cage or Running Gear. Part No. 301099, For current model Diesel Bobcats and Trailblazers without Protective Cage or Running Gear. Part No. 300379, For Trailblazer 302 Air Pak. Part No. 195301, For Big Blue 350 PipePro, 400 Pro, and 450 Duo CST. Part No. 194683, For Big Blue 400 and 500 CC, 500 Pro (CA model), and 700 Duo Pro. Part No. 301113, For Big Blue 500 Pro (T4F model), 800 Duo Pro and 800 Duo Air Pak. Part No. 301262, For Millermatic 141 and 190. Part No. 195149, For Millermatic 211 Auto-Set with MVP. Part No. 195142, For Millermatic 212 Auto-Set, 252, 350P/350P Aluminum, and Syncrowave 210. Features side pocket. Part No. 300388, For Spectrum 875. Part No. 300184, X-CASE for Spectrum 375 X-TREME and 625 X-TREME, and Maxstar 150 models. Part No. 195321, For Maxstar 200 Series. Part No. 195478, For XMT 304 and 350. SP04-52 GREGG DISTRIBUTORS LTD. MILLER® MLR/2784 MIG Accessories INDUSTRIAL MIG 4/0 KIT Consists of flowmeter regulator with 10 ft. (3 m) gas hose, 10 ft. (3 m) 4/0 feeder weld cable with lugs, and 15 ft. (4.6 m) work cable with 600-amp C-clamp. Dual kit comes with two flowmeter regulators and gas hoses. Part No. 300390, For single feeders. Part No. 300957, For dual feeders. INDUSTRIAL MIG 4/0 KIT with DINSE CONNECTOR Same as Industrial MIG 4/0 Kit except weld and work cables have Dinse connector on one end instead of lug. Part No. 300405, For single feeders. Part No. 300956, For dual feeders. SHOPMATE 300 MIG KIT Includes flow gauge regulator and 10 ft. (3 m) gas hose for argon or AR/CO2 mix, 10 ft. (3 m) 1/0 inter connecting cable, 15 ft. (4.6 m) 1/0 work cable with clamp, and consumable storage box. Part No. 300150. OPTIMA™ MIG PULSE CONTROL For XMT CC/CV models. A multipurpose, microprocessor-based pulse control for synergic MIG (wire welding or GMAW), manual MIG pulsing or standard MIG welding. Use this control with above power sources and any Miller® wire feeder, including automatic feeders and spool guns. Includes 25 ft. (7.6 m) cord with 14-pin plug. Part No. 043389. Stick Accessories NO. 2 STICK CABLE SET 2/0 STICK CABLE SET Consists of 15 ft. electrode cable with holder and work cable with clamp. 200 A, 100% duty cycle. Part No. 195196, 15 ft. (4.6 m). Consists of either 50 ft. 2/0 electrode cable with holder and 50 ft. work cable with clamp. 100% duty cycle. Part No. 173851, 50 ft. (15 m), 350 A. TIG Accessories TIG CONTRACTOR KIT Miller Multimatic™ 200 TIG Kit with foot control provides everything you need for remote TIG welding with the Multimatic™ 200 multiprocess welder. Comes complete with: •Weldcraft® 150-amp WP-17 TIG torch with 25 mm Dinse connector •AK-2 torch accessory kit •Remote foot control •Smith flow regulator and gas hose Part No. 301130. RFCS-6M (6-pin plug) CONTROL For Maxstar 150 STL and STH, and Multimatic 200. Part No. 195183, 13.25 ft. (4 m) cord. Part No. 195504, 20-ft (6 m) cord. WELDCRAFT™ WATERCOOLED TORCH KITS 14-PIN TO 6-PIN ADAPTER CORD RCCS-6M (6-pin plug) CONTROL RFCS-5 (5-pin plug) CONTROL RFCS-14 (14-pin plug) CONTROL RMLS-14 (14-pin plug) ROCKER SWITCH For Maxstars (except 150 models), Dynastys, and Syncrowave 250 DX/350 LX. Kit comes with 25 ft. (7.6 m) TIG torch with Dinse-style connector (thread-lock on 400-amp kit), torch cable cover, work clamp with 15 ft. (4.6 m) cable [12 ft. (3.7 m) cable on 400-amp kit], flowmeter regulator with gas hose, and torch accessory kit. Part No. 300185, 250 A, W-250 (WP-20). Part No. 300186, 400 A, W-400 (WP-18SC). Foot pedal current/contactor control. Includes cord and plug. Part No. 043716, 20-ft (6 m) cord. For Maxstar 150 STL and STH, and Multimatic 200. Adapts Miller® 14-pin foot control or fingertip control to a 6-pin plug. Part No. 300507. HD foot pedal current/contactor control. Includes cord and plug. Part No. 043554, 20-ft (6 m) cord. North/south rotary-motion fingertip current/ contactor control attaches to TIG torch using two hook-and-loop fasteners. Great for applications that require a finer amperage control. Includes cord and plug. Part No. 195184, 13.25 ft. (4 m) cord. Momentary- and maintained-contact rocker switch for contactor control. Push forward for maintained contact and backward for momentary contact. Includes 26.5 ft. (8 m) cord and plug. Part No. 129337. www.greggdistributors.ca SP04-53 MILLER® MLR/2784 TIG Accessories 50 MM DINSE-STYLE with WATER RETURN LINE For Maxstar 200/280/350, Dynasty 200/280/350, and Syncrowave 250 DX/350 LX. Used with all Weldcraft™ water-cooled torches. Part No. 195377. AIR-COOLED TIG (GTAW) TORCH CONNECTORS CABLE COVERS Part No. WC-4-10, 10 ft. (3 m). Part No. WC-4-22, 22 ft. (6.7 m). For CST 280, Maxstar 200/280/350, Dynasty 200/280/350, and Syncrowave 250 DX/350 LX. 50 mm Dinse-style for one-piece air-cooled torch. Part No. 195378. Wire Feeder Accessories 8-CONDUCTOR EXTENSION 11-CONDUCTOR EXTENSION CABLES (14CABLES (14-PIN) For XR-Controls, SuitCase 12RC feeder, 20 PIN) Series feeders, and 70 Series (S/D/DX model) feeders. For 14-pin remote controls/24 VAC wire feeders. 14-pin plug to a 14-pin socket. (Not for 115-volt XR or 50 Series feeders.) Part No. 242208025, 25 ft. (7.6 m). Part No. 242208050, 50 ft. (15 m). Part No. 242208080, 80 ft. (24.4 m). For XR-AlumaFeed, MPa Plus feeders, and 60M feeders. 11-conductors to support contactor control and remote voltage control on all Miller® electronic CV 14-pin power sources. Additional functions supported when using the Invision MPa or XMT MPa power sources include synergic Pulsed MIG, remote process select and side select capabilities. Part No. 247831025, 25 ft. (7.6 m). Part No. 247831050, 50 ft. (15 m). Part No. 247831080, 80 ft. (24.4 m). 14-CONDUCTOR EXTENSION CABLES (14PIN) SGA 100 SPOOL GUN CONTROLS & KIT SGA 100C SPOOL GUN CONTROLS & KIT WC-115A WELD CONTROL SGA with contactor required to connect Spoolmate 3035 spool gun to CV engine drives like the Miller Bobcat. Includes 10 ft. (3 m) 115 VAC power cable and plug, 6 ft. (1.8 m) interconnecting cable, and 5 ft. (1.5 m) gas hose. Part No. 043857. Operates on 115 VAC, and designed primarily for constant current DC power sources. Can also be used with constant voltage power sources or DC engine drives supplying 115 VAC. Used with a CC source, the control circuit functions in a voltage-sensing mode and with a CV source, it functions as a constant-speed circuit. Includes wire run-in and drive motor acceleration controls which ensure optimum arc starting performance. Part No. 137546, Without contactor. Part No. 137546-01-1, With contactor. WC-24 WELD CONTROL TURNTABLE ASSEMBLY WIRE STRAIGHTENER Required to connect Spoolmate 3035 spool gun to any Millermatic 141, 190, or 211. Also allows connection to virtually any similar MIG welder — Miller or other brands. Includes 10 ft. (3 m) 115 VAC power cable and plug, 6 ft. (1.8 m) interconnecting cable, and 5 ft. (1.5 m) gas hose. Part No. 043856. For Spoolmate 200 and Spoolmatic/Spoolmatic Pro. Easily mounts on power source. Designed for use with Miller CV power sources with 14-pin receptacles and supplying 24 VAC. Part No. 137549. Allows feeder to rotate as operator changes work position. Reduces strain and bending of gun cable. Part No. 146236. SP04-54 GREGG DISTRIBUTORS LTD. For HDC and WC-115 weld controls, XRControls prior to serial number KK309906, and 50 Series feeders. Fully-loaded 14-pin extension cables for remote controls, and 24-volt and 115-volt feeders. Part No. 242205025, 25 ft. (7.6 m). Part No. 242205050, 50 ft. (15 m). For 20 Series and 70 Series. Part No. 141580, For .035 –.045” (0.9 –1.1 mm) wire. Part No. 141581, For 1/16–1/8” (1.6 – 3.2 mm) wire. SPOOL ADAPTER For use with 14-pound (6.4 kg) spool of Hobart or Lincoln self-shielding wire. Part No. 047141. MILLER® MLR/2784 Drive Rolls, Tongs, & Tips DRIVE ROLL KITS Base selection of drive rolls upon the following recommended usages: 1. V-Grooved rolls for hard wire. 2. U-Grooved rolls for soft and soft shelled cored wires. 3. U-Cogged rolls for extremely soft shelled wires. 4. V-Knurled rolls for hard shelled cored wires. 5. Drive roll types may be mixed to suit particular requirement (example: V-Knurled roll in combination with U-Grooved). Millermatic® 200/210/212/250/251/252/DVI™s /Pulser/Vintage (2 Drive Roll) 22/32/52 Series, SuitCase™ 8/12RC & 8/12VS, Drive Rolls Reach Feeders (2 Drive Roll) Part No. 087131 079594 204579* 190300* 079595 079596 079597 079598 044749 079599 079601 079606 079607 238687* 079608 079609 089984 079610 079611 083318 079614 Type V-Grooved V-Grooved V-Grooved V-Grooved V-Grooved V-Grooved V-Grooved V-Grooved U-Grooved U-Grooved U-Grooved V-Knurled V-Knurled VK-Grooved V-Knurled V-Knurled V-Knurled V-Knurled V-Knurled U-Cogged U-Cogged Fraction Decimal Metric .023 – .025” .023 – .025” 0.6 mm .030” .030” 0.8 mm .030 and .035” .030 and .035” 0.8 and 0.9 mm .035 and .045” .035 and .045” 0.9 and 1.22 mm .035” .035” 0.9 mm .045” .045” 1.2 mm .052” .052” 1.3 mm 1/16” .062” 1.6 mm .035” .035” 0.9 mm 3/64” .047” 1.2 mm 1/16” .062” 1.6 mm .035” .035” 0.9 mm .045” .045” 1.2 mm .045 and 1/16” .045 and 1/16” 1.22 and 1.6 mm .052” .052” 1.3 mm 1/16” .062” 1.6 mm .068 – .072” .068 – .072” 1.8 mm 5/64” .079” 2.0 mm 3/32” .094” 2.4 mm .045” .045” 1.2 mm 1/16” .062” 1.6 mm *Dual-size reversible drive roll 22/24 Series & SuitCase Feeders Nylon Wire Guides (For Feeding Aluminum Wire) Part No. 151203, .047” (1.2 mm) Wire Diameter. Part No. 151205, 1/16” (1.6 mm) Wire Diameter. Part No. 194264, 3/32” (2.4 mm) Wire Diameter. Millermatic® 300/350/350P with Meters (4 Drive Roll) 54 Series, 24A Drive Rolls & R-115 Feeders (4 Drive Roll) Part No. 087132 046780 046781 227061* 046782 046783 046784 044750 046785 046787 046792 046793 046794 046795 046796 046797 Type V-Grooved V-Grooved V-Grooved V-Grooved V-Grooved V-Grooved V-Grooved U-Grooved U-Grooved U-Grooved V-Knurled V-Knurled V-Knurled V-Knurled V-Knurled V-Knurled Fraction Decimal Metric .023 – .025” .030” .035” .035 and 3/64” 3/64” .052” 1/16” .035” 3/64” 1/16” .035” 3/64” .052” 1/16” 5/64” 3/32” .023 – .025” .030” .035” .035/.045” .045” .052” .062” .035” .047” .062” .035” .045” .052” .062” .079” .094” 0.6 mm 0.8 mm 0.9 mm 0.9/1.2 mm 1.2 mm 1.3 mm 1.6 mm 0.9 mm 1.2 mm 1.6 mm 0.9 mm 1.2 mm 1.3 mm 1.6 mm 2.0 mm 2.4 mm *Dual-size reversible drive roll 62 series feeders, Pipe Pro 12 RC (2 roll kits), 64, 74 series feeder, Pipe Pro Single, Pipe Pro Single DX, Pipe Pro Dual DX, Pipe Worx 400 and all Axcess Feeders (4 roll kit) 2 Roll Kit Part No. 151030 — 151032 190300* — 151033 151034 — 151044 — 151045 — 151047 — 151061 151062 — 151064 151065 151066 151067 — — — — 4 Roll Kit Part No. Type Fraction Decimal Metric 151024 151025 151026 209533* 161190 151027 151028 151029 151036 244293 151037 243234 151039 151041 151052 151053 151054 151055 151056 151057 151058 151059 151060 151070 151072 V-Grooved V-Grooved V-Grooved V-Grooved V-Grooved V-Grooved V-Grooved V-Grooved U-Grooved U-Grooved U-Grooved U-Grooved U-Grooved U-Grooved V-Knurled V-Knurled V-Knurled V-Knurled V-Knurled V-Knurled V-Knurled V-Knurled V-Knurled U-Cogged U-Cogged .023 – .025” .030” .035” .035 and 3/64” .040” 3/64” .052” 1/16” .035” .035 and 3/64” 3/64” .047” 1/16” 3/32” .035” 3/64” .052” 1/16” .068 – .072” 5/64” 3/32” 7/64” 1/8” 3/64” 1/16” .023 – .025” .030” .035” .035/.045” .040” .045” .052” .062” .035” .035/.045” .045” .047” .062” .094” .035” .045” .052” .062” .068 – .072” .079” .094” .110” .126” .045” .062” 0.6 mm 0.8 mm 0.9 mm 0.9/1.2 mm 1.0 mm 1.2 mm 1.3 mm 1.6 mm 0.9 mm 1.9/1.2 mm 1.2 mm 1.2 mm 1.6 mm 2.4 mm 0.9 mm 1.2 mm 1.3 mm 1.6 mm 1.8 mm 2.0 mm 2.4 mm 2.8 mm 3.2 mm 1.2 mm 1.6 mm *Dual-size reversible drive roll MSW & LMSW SERIES TONGS & TIPS Standard Part No. 040197, 6” (152 mm) Tong. Part No. 040198, 12” (305 mm) Tong. Part No. 040199, 18” (457 mm) Tong. Part No. 040211, Standard Tip. Part No. 040212, Flat Tip. MO Offset Part No. 040200, 6” (152 mm) Tong. Part No. 040201, 12” (305 mm) Tong. Part No. 040202, 18” (457 mm) Tong. Part No. 040215, Tip. TT-6 Part No. 040203, 12” (305 mm) Tong. Part No. 040204, 18” (457 mm) Tong. Part No. 040211, Standard Tip. Part No. 040212, Flat Tip. TT-9 Part No. 040205, 12” (305 mm) Tong. Part No. 040206, 18” (457 mm) Tong. Part No. 040211, Standard Tip. Part No. 040212, Flat Tips. G-7 8” (203 mm) Part No. 040207, 8” (203 mm) Tong. Part No. 040211, Standard Tip. Part No. 040212, Flat Tip. FF 8” (203 mm) Part No. 040208, 8” (203 mm) Tong. Part No. 040213, Tip. FH 5” (127 mm) Part No. 040209, 5” (127 mm) Tong. Part No. 040214, Tip. www.greggdistributors.ca SP04-55 MILLER® MLR/2784 Welding Electrical Accessories CAM-LOK TWISTLOCK RECEPTACLES/CONNECTORS Part No. 039628 039638 056271 039633 039629 039630 039639 Description Colour Receptacle, Insul. (Female) Receptacle, Insul. (Female) Receptacle, Uninsul. (Male) Connector, Insul. Set Scr. (In-Line Female) Connector, Insul. Set Scr. (Male) Connector, Insul. Set Scr. (Male) Connector, Insul. Set Scr. (Male) Cable Capacity Black Black Black Red No. 2/0 – 3/0 (25 – 70 mm) No. 3/0 – 4/0 (70 – 95 mm) — No. 1/0 – 3/0 (50 – 70 mm) Red Red Red No. 2 – 1/0 (35 – 50 mm) No. 1/0 – 3/0 (50 – 70 mm) No. 3/0 – 4/0 (70 – 95 mm) MILLER RECEPTACLES/CONNECTORS Part No. 039801 039800 057608 039901 039608 039878 039611 Description Colour Receptacle, Insulated (Female) Receptacle, Insulated (Female) Receptacle, Insulated (Female) Plug, Insulated (Male) Plug, Insulated (Male) Plug, Insulated (Male) Connector, Insulated (Female) Black Red Yellow Black Red Yellow Black Cable Capacity — — — No. 1 – 4 No. 1 – 4 No. 1 – 4 No. 1 – 4 Receptacle, Brass with O-ring (Female) Receptacle, Brass (Female) O-Ring, 0.296 ID x 0.139 H Silicone O-Ring, 0.739 ID x 0.070 H Insulator, bulkhead front O-Ring, 0.989 ID x 0.070 H Insulator, bulkhead rear Washer, domed load .812 ID x 1.450 OD x .070 THK Tooth washer, 1 mm intern Nut, M20-1.5 1.00 Hex .19 H BRS locking Screw, M10-1.5x 20 Hex HD-PLN 8.8 PLD SEMS 218677 • • — — • • 218678 SPECTRUM CONNECTORS Receptacle Assembly (Female) Part No. Part No. Part No. Part No. 208967 202813 129525 186092 • — — • • • • • • — - • • • — • • • • • • • — • • • • • — — • — • • — Part No. 209219, Receptacle Assembly (Female). Includes Receptacle (Brass ((Female)), Insulator (bulkhead front), Insulator (bulkhead rear), Washer, and Nut. Part No. 218183, Receptacle Assembly (Female). Includes Receptacle (Brass ((Female)), (2) O-Rings, Insulator (bulkhead front), Insulator (bulkhead rear), Tooth washer, and Nut. Part No. 191981, Connector, Insulated (Male), No. 4 – 1/0 - 2/0 (25 – 50 mm). Part No. 218677, Connector, Insulated (Female), No. 4 – 1/0 2/0 (25 – 50 mm). Part No. 218678, Adapter, Threaded Stud to Tweco (stud hole dia. 5/8”) 191981 Dinse™ TWISTLOCK RECEPTACLES (50/70 SERIES) Features TWECO-STYLE TWISTLOCK RECEPTACLES/CONNECTORS Connector, TW LK Insulated Male (Tweco-Lenco Type) SK 10-25 Part No. 263801. MAXSTAR 700/DYNASTY 700 CONNECTORS Part No. 225029, Connection Kit, Thread Lock Double Dry Adapters. Part No. 225028, Adapter, Torch-Thread Lock Water (7/8 LHT). • • — Dinse™ TWISTLOCK RECEPTACLES/CONNECTORS Part No. Series 127837 25 143419 50 127835 25 129526 50 136600 70 138180 95 127836 25 129527 50 134460 70 241354 95 194722 50 194723 50 232728 50/70 Description Cable Capacity/Thread Size Receptacle, Insulated (Female) — Receptacle, Insulated (Male) — Connector, Insulated (Female) No. 3 – No. 4 Connector, Insulated (Female) No. 2 – 1/0 (35 – 50 mm) Connector, Insulated (Female) No. 1/0 – 3/0 (50 – 70 mm) Connector, Insulated (Female) No. 3/0 – 4/0 (70 – 95 mm) Connector, Insulated (Male) No. 3 – No. 4 Connector, Insulated (Male) No. 2 – 1/0 (35 – 50 mm) Connector, Insulated (Male) No. 1/0 – 3/0 (50 – 70 mm) Connector, Insulated (Male) No. 3/0 – 4/0 (70 – 95 mm) Connector, Insulated (Male) 3/8-24R Flow-Thru 125/150 A Connector, Insulated (Male) 7/8-14R Flow-Thru 200 A Adapter, Threaded Stud to Dinse (stud hole dia. 1/2”) TWECO®-STYLE CONNECTOR For Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. Accepts #1/0 to #2/0 AWG cable. Kit includes one Tweco-style male plug which attaches to the work and/or weld cables and plugs into the Tweco-style receptacles on the power source. Part No. 191981. SP04-56 GREGG DISTRIBUTORS LTD. DINSE-STYLE CONNECTOR KITS For Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. Kits include one male Dinse-style plug which attaches to the work and/or weld cables and plugs into the Dinse-style receptacles on the power source. Part No. 042418, Accepts #4 to #1/0 AWG cable. Part No. 042533, Accepts #1/0 to #2/0 AWG cable. EXTENSIONS FOR DINSE-STYLE CABLE CONNECTORS For Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. Used to adapt or extend weld and/or work cables. Accepts #1/0 to #2/0 AWG cable. Part No. 134460, Male Dinse-style plug. Part No. 136600, Female Dinse-style receptacle. MILLER® MLR/2784 Welding Electrical Accessories EXTENSION KITS FOR DINSE-STYLE CABLE CONNECTORS For Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. Used to adapt or extend weld and/or work cables. Kit includes one male Dinsestyle plug and one in-line female Dinse-style receptacle. Part No. 042419, Accepts #4 to #1/0 AWG cable. DINSE ADAPTERS For Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. One-piece adapter with Dinse-style male plug (to power source) on one end and Tweco or Cam-Lok female receptacle (for weld cable connection) on other end. Part No. 042465, Dinse/Tweco®Adapter. Part No. 042466, Dinse/Cam-Lok Adapter. TWECO®/DINSE ADAPTER For Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. One-piece adapter with Tweco-style male plug (to power source) on one end and Dinse-style female receptacle (for weld cable connection) on other end. Part No. 210061. PROFESSIONAL SERIES ELECTRODE HOLDERS PA532, PA316, PA732 •Ergonomic — High lever design for greater grip and hand clearance •Lightweight and easy-to-use •Fully insulated, high-strength springs for excellent gripping power •Heavy-duty, shock-proof nylon handle •Grooved jaw design insures firm electrode grip •High-impact, high-temperature fiberglass tip insulators •Professional series features high copper alloy tongs, utility series features brass tongs •Holders supplied with allen wrench and cable connections ferrule assuring efficient connections Part No. PA532 PA316 PA732 PA14HD PA14HD Amperage Capacity 200 250 300 400 Electrode Capacity 5/32” (4.0 mm) 3/16” (4.8 mm) 7/32” (5.6 mm) 1/4” (6.4 mm) Cable Length Capacity No. 2/0 (70 mm) 8-1/2” (215 mm) No. 2/0 (70 mm) 9-1/4” (235 mm) No. 2/0 (70 mm) 10” (250 mm) No. 4/0 (105 mm) 11” (280 mm) Weight 15 oz (415 g) 16 oz (450 g) 19 oz (530 g) 23 oz (650 g) WORK CLAMPS EG500 PGC200 EG Series — Steel Work Clamps •Zinc plated •Large hex screw cable connection assures safe cable connection every time •Pure copper braided shunts on #EG500 allows both jaws to carry welding current PGC Series — Copper Alloy •Contoured handle lever for easy jaw opening •Strong gripping power •Large contact area assures positive grounding •Fully insulated spring •Conductor body holds the cable securely •Large hex screw cable connection assures safe cable connection every time MGC Series — Magnetic Work Clamps •Large contact area assures excellent electrical contact •Strong gripping power •Grounding concealed to prevent dislodgment •Insulated to prevent annealing •Easy installation or removal •Most popular magnetic work clamps in the market Electrode Cable Part No. Amperage Length Weight Capacity Capacity Capacity EG200 200 1-1/2” (40 mm) No. 6–4 (10–16 mm) 7” (175 mm) 7 oz (199 g) EG300 300 2” (50 mm) No. 2–1 (25–35 mm) 8” (200 mm) 14 oz (390 g) EG500 500 2” (50 mm) No. 1/0–4/0 (50–105 mm) 10” (245 mm) 17 oz (490 g) PGC200 200 1” (25 mm) No. 1–1/0 (35–50 mm) 6” (150 mm) 16 oz (445 g) 213619 300 2” (50 mm) 1/0 (50 mm) 8” (200 mm) 13 oz (368 g) 240697 200 2” (50 mm) No. 6 6-1/4” 6 oz (168 g) POWER TERMINALS Part No. 219515 219516 213380 219535 119172 254140 Description 50 amp, 230 volt pin-type wall receptacle 50 amp, 230 volt pin-type male plug 50 amp, 230 volt pin-type male plug (heavy-duty) 50 amp, 230 volt pin-type cord-mount receptacle 50 amp, 125/250 volt pin-type male plug Plug, str grd 3P4W 3PH 50A 240V 15-50P Cord Range (Min. – Max.) — 0 – 1.00 0.625 – 1.320 0.425 – 1.31 0.62 – 1.31 — POWER TERMINAL RUBBER BOOTS Part No. 179848, Positive. Part No. 180732, Negative. www.greggdistributors.ca SP04-57 HOBART® HOB/2455 Mild Steel Electrodes Pipemaster® Pro-60 AWS E6010 Pipemaster Pro-60 is a quick-starting, cellulosic mild steel electrode that provides you with out-standing arc stability, penetration and wash-in. It’s ideal for welding in all positions and produces an X-ray quality weld with light slag that’s easy to remove. Pipemaster Pro-60 can be used to weld the following API 5L steels: Grade A, B, X-42, X-46, X-52, X-56 and for the root pass on material up to X-80. It features enhanced weldabilty and increased physical properties. Earthtone grey coating. Typical Applications: •Construction and shipbuilding •General-purpose fabrication •Maintenance welding •Out-of-position X-ray welds •Pipe welding •Vertical and overhead plate welding Typical Mechanical Properties (AW): Tensile Strength (psi): 79,000 (542 MPa) Yield Strength (psi): 66,000 (456 MPa) Elongation % in 2” (50 mm): 23% Approvals and Conformances: •AWS A5.1, E6010 •ASME SFA 5.1, E6010 •Lloyd’s Grade 3m •En 499, E383C21 •ABS E6010 Part No. Diameter S129132-035 3/32” (2.4 mm) S129144-035 1/8” (3.2 mm) S129151-035 5/32” (4.0 mm) Recommended Operating Ranges Package Size 40 - 70 amps 65 - 130 amps 90 - 175 amps 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can Hobart® 610 AWS E6010 Hobart 610 is a mild steel cellulose electrode that gives outstanding arc stability, consistent arc control, quick starts and restarts with low spatter. Its excellent bead wash, penetration and tie-in, plus the all-positional capability, make it a preferred electrode for pipe welding applications or fabrication jobs. Typical Applications: •Pipe welding •Construction and shipbuilding •General purpose fabrication •Maintenance applications Typical Mechanical Properties (AW): Tensile Strength (psi): 84,000 (576 MPa) Yield Strength (psi): 70,000 (479 MPa) Elongation % in 2” (50 mm): 26% Approvals and Conformances: •AWS A5.1, E6010 •CWB E4310 •ASME SFA 5.1, F3, A1, E6010 Part No. Diameter Recommended Operating Ranges Package Size S129432-033 S129432-035 S129432-045 S129432-089 S129444-033 S129444-035 S129444-045 S129444-089 S129451-033 S129451-035 S129451-045 S129451-089 3/32” (2.4 mm) 3/32” (2.4 mm) 3/32” (2.4 mm) 3/32” (2.4 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 40 - 70 amps 40 - 70 amps 40 - 70 amps 40 - 70 amps 80 - 120 amps 80 - 120 amps 80 - 120 amps 80 - 120 amps 100 - 160 amps 100 - 160 amps 100 - 160 amps 100 - 160 amps 10 lb (4.5 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 10 lb (4.5 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 10 lb (4.5 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak Hobart® 335A AWS E6011 The Hobart 335A offers a fine spray transfer that enhances operator appeal in all positions. Designed for use with AC power sources, this all-position, cellulose-based electrode provides stable arc characteristics and good penetration. Typical Applications: •Galvanized steel work •General-purpose fabrication •Railcar •Shipbuilding •Structural work Typical Mechanical Properties (AW): Tensile Strength (psi): 82,000 (565 MPa) Yield Strength (psi): 69,000 (478 MPa) Elongation % in 2” (50 mm): 26% Approvals and Conformances: •AWS A5.1, E6011 •ASME SFA 5.1 •Lloyd’s 2m, 2Ym •CWBE4311 •ABS E6011 SP04-58 GREGG DISTRIBUTORS LTD. Pipemaster® 60 AWS E6010 Use Pipemaster 60 for quick starting, excellent arc stability, superior arc drive (penetration), light slag and excellent wash-in. An all-position cellulosic mild steel electrode, it outdoes itself in producing X-ray quality welds. Earthtone grey coating. Typical Applications: •Construction and shipbuilding •General-purpose fabrication •Maintenance welding •Out-of-position X-ray welds •Pipe welding •Vertical and overhead plate welding Typical Mechanical Properties (AW): Tensile Strength (psi): 73,000 (504 MPa) Yield Strength (psi): 63,000 (432 MPa) Elongation % in 2” (50 mm): 26% Approvals and Conformances: •AWS A5.1, E6010 •ASME SFA 5.1, E6010 •Lloyd’s Grade 3m •ABS E6010 Part No. Diameter Recommended Operating Ranges Package Size S116532-035 S116532-045 S116532-089 S116544-035 S116544-045 S116544-089 S116551-035 S116551-045 S116551-089 S116558-035 3/32” (2.4 mm) 3/32” (2.4 mm) 3/32” (2.4 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 3/16” (4.8 mm) 40 - 70 amps 40 - 70 amps 40 - 70 amps 65 - 130 amps 65 - 130 amps 65 - 130 amps 90 - 175 amps 90 - 175 amps 90 - 175 amps 140 - 225 amps 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Sealed Can Pipemaster® 70 AWS E7010-P1 The Pipemaster 70, an all-position cellulosic mild steel electrode, is excellent for producing X-ray quality welds. It’s quick starting with excellent arc stability, superior penetration, light slag and excellent wash-in. Pipemaster 70 can also help you handle vertical-down welding on all passes on 5L, 5LX and X52 through X65 pipe. Typical Applications: •Welding of high-yield pipe steels •Pipeline welding using downhill travel •Shipbuilding •Storage tanks •Drill platforms Typical Mechanical Properties (AW): Tensile Strength (psi): 83,000 (570 MPa) Yield Strength (psi): 69,000 (475 MPa) Elongation % in 2” (50 mm): 25% Approvals and Conformances: •AWS A5.5, E7010-P1 •ASME SFA 5.5, E7010-P1 •Lloyd’s Grade 3m, 3Ym •ABS E7010-P1 Part No. Diameter Recommended Operating Ranges S116644-035 1/8” (3.2 mm) S116651-035 5/32” (4.0 mm) S116658-035 3/16” (4.8 mm) Package Size 70 - 140 amps 50 lb (22.7 kg) Sealed Can 80 - 190 amps 50 lb (22.7 kg) Sealed Can 120 - 230 amps 50 lb (22.7 kg) Sealed Can Part No. Diameter Recommended Operating Ranges Package Size S112232-031 S112232-045 S112232-089 S112244-031 S112244-035 S112244-045 S112244-089 S112251-031 S112251-035 S112251-045 S112251-089 S112258-031 S112258-035 3/32” (2.4 mm) 3/32” (2.4 mm) 3/32” (2.4 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 3/16” (4.8 mm) 3/16” (4.8 mm) 60 - 90 amps 60 - 90 amps 60 - 90 amps 80 - 125 amps 80 - 125 amps 80 - 125 amps 80 - 125 amps 130 - 160 amps 130 - 160 amps 130 - 160 amps 130 - 160 amps 160 - 190 amps 160 - 190 amps 50 lb (22.7 kg) Carton 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Carton 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Carton 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Carton 50 lb (22.7 kg) Sealed Can HOBART® HOB/2455 Mild Steel Electrodes Hobart® 335C AWS E6011 The versatile soft-arc electrode Hobart 335C is designed for AC power sources, but it can also be used on DCEP or DCEN. With the ability to weld through paint, mill scale or rust, it is an allposition cellulosic electrode with the ultimate operator appeal. Typical Applications: •General construction •Light sheet metal fabrication •Maintenance and repair welding •Shipbuilding •Welding on galvanized steels •Welding through paint, mill scale or rust Typical Mechanical Properties (AW): Tensile Strength (psi): 83,000 (572 MPa) Yield Strength (psi): 72,000 (500 MPa) Elongation % in 2” (50 mm): 27% Approvals and Conformances: •AWS A5.1, E6011 •ASME SFA 5.1 •Lloyd’s 2m, 2Ym •ABS E6011 Part No. Diameter S113532-031 3/32” (2.4 mm) S113544-031 1/8” (3.2 mm) S113551-031 5/32” (4.0 mm) Recommended Operating Ranges Package Size 60 - 90 amps 50 lb (22.7 kg) Carton 80 - 125 amps 50 lb (22.7 kg) Carton 130 - 160 amps 50 lb (22.7 kg) Carton Hobart® 447C AWS E6013 A soft arc AWS 6013 electrode, Hobart 447C is the best way to take control of poor fit-up conditions. It has fast-freeze characteristics, giving it preferred operator appeal. Hobart 447C versatility extends its usage with AC or DC power sources and low open-circuit voltage AC machines. Typical Applications: •General-purpose fabrication •Machine parts •Metal buildings and structures •Shaft buildup Typical Mechanical Properties (AW): Tensile Strength (psi): 75,000 (520 MPa) Yield Strength (psi): 67,000 (465 MPa) Elongation % in 2” (50 mm): 27% Approvals and Conformances: •AWS A5.1, E6013 •ASME SFA 5.1 •CWB E4313 •ABS E6013 Part No. S117132-031 S117132-089 S117144-031 S117144-089 S117151-031 S117151-089 Diameter Recommended Operating Ranges 3/32” (2.4 mm) 40 - 80 amps 3/32” (2.4 mm) 40 - 80 amps 1/8” (3.2 mm) 70 - 120 amps 1/8” (3.2 mm) 70 - 120 amps 5/32” (4.0 mm) 130 - 160 amps 5/32” (4.0 mm) 130 - 160 amps Package Size 50 lb (22.7 kg) Carton 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Carton 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Carton 10 lb (4.5 kg) Plastic Pak Hobart® 447A AWS E6013 Fast freeze characteristics make this the perfect choice for welding applications that have poor fit-up conditions. Produces a very stable arc with good weld bead appearance. Excellent choice for sheet metal welding. Typical Applications: •General-purpose fabrication •Machine parts •Metal buildings and structures •Shaft buildup Typical Mechanical Properties (AW): Tensile Strength (psi): 74,000 (514 MPa) Yield Strength (psi): 67,000 (463 MPa) Elongation % in 2” (50 mm): 30% Approvals and Conformances: •AWS A5.1, E6013 •ASME SFA 5.1 •ABS E6013 Part No. Diameter Recommended Operating Ranges S113832-031 S113832-045 S113832-089 S113844-031 S113844-045 S113844-089 S113851-031 S113851-045 S113851-089 S113858-031 3/32” (2.4 mm) 3/32” (2.4 mm) 3/32” (2.4 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 3/16” (4.8 mm) 40 - 80 amps 40 - 80 amps 40 - 80 amps 70 - 120 amps 70 - 120 amps 70 - 120 amps 130 - 160 amps 130 - 160 amps 130 - 160 amps 140 - 220 amps Package Size 50 lb (22.7 kg) Carton 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Carton 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Carton 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Carton Hobart® 14A AWS E7014 When you are tackling jobs where higher deposition and speed of travel are needed, the Hobart 14A is the electrode to choose. An all-position electrode, Hobart 14A is equipped with a rutile base and iron powder addition to increase deposition rates and give operator appeal. This electrode offers outstanding slag removal and bead appearance and can be operated with AC, DCEP or DCEN power. Typical Applications: •Frames •Heavy sheet metal •Machine bases Typical Mechanical Properties (AW): Tensile Strength (psi): 81,000 (561 MPa) Yield Strength (psi): 73,000 (505 MPa) Elongation % in 2” (50 mm): 24% Approvals and Conformances: •AWS A5.1, E7014 •ASME SFA 5.1, E7014 •CWB E4914 •ABS E7014 Part No. Diameter Recommended Operating Ranges S114232-031 S114232-045 S114232-089 S114244-031 S114244-045 S114244-089 S114251-031 S114251-045 S114251-089 S114258-031 3/32” (2.4 mm) 3/32” (2.4 mm) 3/32” (2.4 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 3/16” (4.8 mm) 70 - 90 amps 70 - 90 amps 70 - 90 amps 120 - 145 amps 120 - 145 amps 120 - 145 amps 140 - 210 amps 140 - 210 amps 140 - 210 amps 180 - 280 amps Package Size 50 lb (22.7 kg) Carton 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Carton 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Carton 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Carton Hobart® Rocket® 7024 AWS E7024 The Rocket 7024 is engineered with outstanding ”best in class” features including, complete slag removal, extremely low spatter and super smooth soft arc. This E7024 electrode is more forgiving than anything else on the market when it comes to welding material that is moderately rusty or not as clean as it should be. It is also exceptionally fast when used down hand in properly designed weld joints or in horizontal fillet welds and can be used in both single or multipass applications. Typical Applications: •Plate fabrication •Tank fabrication •Barge construction •Construction and earthmoving equipment Typical Mechanical Properties (AW): Tensile Strength (psi): 82,000 (562 MPa) Yield Strength (psi): 70,000 (484 MPa) Elongation % in 2” (50 mm): 26% Approvals and Conformances: •AWS A5.1, E7024 •ASME SFA 5.1, E7024 •ABS E7024 Part No. Diameter Recommended Operating Ranges S112944-031 S112951-031 S112959-031 S112970-031 S112981-031 1/8” (3.2 mm) 5/32” (4.0 mm) 3/16” (4.8 mm) 7/32” (5.6 mm) 1/4” (6.4 mm) 130 - 170 amps 180 - 245 amps 200 - 300 amps 250 - 340 amps 300 - 380 amps Package Size 50 lb (22.7 kg) Carton 50 lb (22.7 kg) Carton 50 lb (22.7 kg) Carton 50 lb (22.7 kg) Carton 50 lb (22.7 kg) Carton www.greggdistributors.ca SP04-59 HOBART® HOB/2455 Mild Steel Electrodes Hobart® 418 AWS E7018 H4R/E7018-1 H4R Hobart 418 gives you all the flexibility you need in a general-purpose, low-hydrogen, mild steel electrode. It also has good out-of-position welding capabilities and provides an X-ray quality deposit. This unique electrode is ideal for tacking prior to finish welding with Fabshield selfshielded, tubular wire, because the construction of the Hobart 418 allows removal of all the slag from the self-shielded wire. Typical Applications: •Field erections, steel structures •Jobs where low-hydrogen weld metal in the tensile strength range of 70,000 psi is required •Low alloy structurals •Low-, medium- and high-carbon steels •Offshore rigs, power plants Typical Mechanical Properties (AW): Tensile Strength (psi): 78,000 (541 MPa) Yield Strength (psi): 64,000 (441 MPa) Elongation % in 2” (50 mm): 29% Approvals and Conformances: •AWS A5.1, E7018 H4R, E7018-1 H4R •ASME SFA 5.1, E7018 •ABS 3H5, 3Y •Lloyd’s BF3.3YH5 •CWB E4918-1 H4 Part No. Diameter S119932-033 3/32” (2.4 mm) S119932-035 3/32” (2.4 mm) S119932-045 3/32” (2.4 mm) S119932-089 3/32” (2.4 mm) S119944-033 1/8” (3.2 mm) S119944-035 1/8” (3.2 mm) S119944-045 1/8” (3.2 mm) S119944-089 1/8” (3.2 mm) S119951-033 5/32” (4.0 mm) S119951-035 5/32” (4.0 mm) S119951-045 5/32” (4.0 mm) S119951-089 5/32” (4.0 mm) S119958-035 3/16” (4.8 mm) S119970-035 7/32” (5.6 mm) S119981-035 1/4” (6.4 mm) Recommended Operating Ranges 80 - 100 amps 80 - 100 amps 80 - 100 amps 80 - 100 amps 90 - 150 amps 90 - 150 amps 90 - 150 amps 90 - 150 amps 110 - 230 amps 110 - 230 amps 110 - 230 amps 110 - 230 amps 150 - 300 amps 220 - 350 amps 270 - 380 amps Package Size 10 lb (4.5 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 10 lb (4.5 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 10 lb (4.5 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can Hobart® 18AC AWS E7018 H8 Highly recommended for applications using small 208/230V, single phase AC welders, 18AC has good operator appeal, excellent re-striking characteristics and an extremely stable arc. 18AC is also an excellent choice for skip or tack welds. The slag is self-removing in most applications. 18AC will work well on all AC power sources and performs exceptionally well on utility-type welders. Typical Applications: •Low, medium and high-carbon steels •Skip or tack welds •Shops, farms, hobbyist •Some high-strength low alloy steels Typical Mechanical Properties (AW): Tensile Strength (psi): 87,000 (597 MPa) Yield Strength (psi): 75,000 (516 MPa) Elongation % in 2” (50 mm): 30% Approvals and Conformances: •AWS A5.1, E7018 H8 •ASME SFA 5.1, E7018 Part No. Diameter Recommended Operating Ranges S119832-035 S119832-045 S119832-089 S119844-035 S119844-045 S119844-089 S119851-035 S119851-045 S119851-089 3/32” (2.4 mm) 3/32” (2.4 mm) 3/32” (2.4 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 70 - 110 amps 70 - 110 amps 70 - 110 amps 90 - 165 amps 90 - 165 amps 90 - 165 amps 125 - 220 amps 125 - 220 amps 125 - 220 amps Package Size 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Sealed Can 5 lb (2 kg) Plastic Pak 10 lb (4.5 kg) Plastic Pak Low Alloy Electrodes Hoballoy® 10018D2 Hobart® 718MC AWS E7018 H4R/E7018(M)-1 H4R You can take control with the electrode that’s formulated and manufactured to give you excellent moisture resistance, good out-of-position welding capabilities and an X-ray quality deposit. The 718MC meets the requirements of military spec. Mil-E-22200/10, including moisture absorption limits of .10% max. as opened and .20% max. after 9 hrs. at 80°F and 80% relative humidity. Typical Applications: •Barge offshore rigs, shipbuilding •Boiler code applications •Field erection, steel structures •Petrochemical plants, power plants •Railcar and locomotive construction •Welding of enameling steels; free machining steels; low alloy structurals; and low, medium or high carbon steels •Weldments in low-temperature environments where low-temperature impacts are important Typical Mechanical Properties (AW): Tensile Strength (psi): 80,000 (550 MPa) Yield Strength (psi): 69,000 (478 MPa) Elongation % in 2” (50 mm): 28% Approvals and Conformances: •AWS A5.1, E7018 H4R, E7018 -1H4R •ABS 3H5, 3Y •ASME SFA 5.1, E7018 •MIL-E-22200/10 Part No. Diameter Recommended Operating Ranges Package Size S115932-035 S115932-089 S115944-035 S115944-089 S115951-035 S115951-089 S115958-035 S115970-035 S115981-035 3/32” (2.4 mm) 3/32” (2.4 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 3/16” (4.8 mm) 7/32” (5.6 mm) 1/4” (6.4 mm) 70 - 110 amps 70 - 110 amps 90 - 165 amps 90 - 165 amps 125 - 220 amps 125 - 220 amps 160 - 300 amps 260 - 340 amps 270 - 380 amps 50 lb (22.7 kg) Sealed Can 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Sealed Can 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Sealed Can 10 lb (4.5 kg) Plastic Pak 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can Hobart® 7018XLM AWS E7018 H4R / E7018-1 H4R A high deposition rate, iron powder electrode for use with either AC or DCEP. The 7018XLM is known for its outstanding ease of welding in vertical or overhead positions. This electrode can be used for mild steel and joining mild steel to low ally steels. Typical Applications: •Field erections •Shipbuilding •Pipeline •Construction Typical Mechanical Properties (AW): Tensile Strength (psi): 77,000 (529MPa) Yield Strength (psi): 64,000 (441MPa) Elongation % in 2” (50 mm): 32% Approvals and Conformances: •AWS A5.1, E7018-1 H4R •ASME SFA 5.1, E7018-1 H4R •ABS Part No. Diameter Recommended Operating Ranges Package Size S422032-031 S422032-033 S422032-035 S422044-031 S422044-033 S422044-035 S422051-031 S422051-033 S422051-035 S422058-031 S422058-033 S422058-035 S422070-035 S422081-035 3/32” (2.4 mm) 3/32” (2.4 mm) 3/32” (2.4 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 3/16” (4.8 mm) 3/16” (4.8 mm) 3/16” (4.8 mm) 7/32” (5.6 mm) 1/4” (6.4 mm) 70-110 amps 70-110 amps 70-110 amps 90-160 amps 90-160 amps 90-160 amps 110-230 amps 110-230 amps 110-230 amps 190-300 amps 190-300 amps 190-300 amps 240-340 amps 310-390 amps 50 lb (22.7 kg) Carton 10 lb (4.5 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Carton 10 lb (4.5 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Carton 10 lb (4.5 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Carton 10 lb (4.5 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can AWS E10018-D2 H4R A high-quality electrode, Hoballoy 10018D2 is designed for the welding of high tensile steels and manganesemolybdenum steels requiring tensile strengths of at least 100,000 psi. It has high operator appeal and offers a wide variety of welding advantages including good arc characteristics, ductility, crack-resistance, easy slag removal, and low spatter and smoke. Plus, Hoballoy 10018D2 is an ideal choice for conditions of high heat and humidity because it features a special coating that’s designed to reduce moisture pick-up, which also helps to minimize hydrogen cracking and starting porosity. Typical Applications: •Manganese-moly castings •Alloy forgings •Structurals •Pressure vessel applications in either the as welded or stress-relieved condition Typical Mechanical Properties (stress relieve 1 hour @ 1150°F): Tensile Strength (psi): 109,000 (772 MPa) Yield Strength (psi): 96,000 (661 MPa) Elongation % in 2” (50 mm): 23% Approvals and Conformances: •AWS A5.5, E10018-D2 H4R •ASME SFA 5.5, E10018-D2 H4R SP04-60 GREGG DISTRIBUTORS LTD. Part No. Diameter Recommended Operating Ranges Package Size S125732-035 S125744-035 S125751-035 S125758-035 S125781-035 3/32” (2.4 mm) 1/8” (3.2 mm) 5/32” (4.0 mm) 3/16” (4.8 mm) 1/4” (6.4 mm) 70 - 110 amps 90 - 160 amps 130 - 220 amps 200 - 300 amps 300 - 400 amps 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can 50 lb (22.7 kg) Sealed Can HOBART® HOB/2455 Mild Steel Solid Wires Part No. Diameter Package Size S307608-011 0.035” (0.9 mm) 600 lb (272 kg) Robo-Pak S307608-028 0.035” (0.9 mm) 60 lb (27 kg) Fiber Spool S307608-033 0.035” (0.9 mm) 33 lb (15 kg) Steel Reel S307608-045 0.035” (0.9 mm) 45 lb (20.4 kg) Steel Reel S307608-070 0.035” (0.9 mm) 950 lb (431 kg) Robo-Pak S307608-073 0.035” (0.9 mm) 300 lb (136 kg) Robo-Pak S307608-074 0.035” (0.9 mm) 600 lb (272 kg) Robo-Pak S307608-085 0.035” (0.9 mm) 45 lb (20.4 kg) Fiber Spool S307610-085 0.040” (1.0 mm) 45 lb (20.4 kg) Fiber Spool S307612-011 0.045” (1.2 mm) 600 lb (272 kg) Robo-Pak S307612-028 0.045” (1.2 mm) 60 lb (27 kg) Fiber Spool S307612-033 0.045” (1.2 mm) 33 lb (15 kg) Steel Reel S307612-045 0.045” (1.2 mm) 45 lb (20.4 kg) Steel Reel S307612-070 0.045” (1.2 mm) 950 lb (431 kg) Robo-Pak S307612-074 0.045” (1.2 mm) 600 lb (272 kg) Robo-Pak S307612-085 0.045” (1.2 mm) 45 lb (20.4 kg) Fiber Spool S307615-028 0.052” (1.4 mm) 60 lb (27 kg) Fiber Spool S307615-070 0.052” (1.4 mm) 950 lb (431 kg) Robo-Pak S307618-013 1/16” (1.6 mm) 500 lb (227 kg) Robo-Pak S307618-045 1/16” (1.6 mm) 45 lb (20.4 kg) Steel Reel Quantum Arc™ 6 AWS ER70S-6 When the task demands excellent weldability for CO2 or Ar/CO2 mixtures and you have rusty, scaly or oily plates, choose the mild steel electrode with deoxidizers powerful enough to handle the job. Hobart Quantum Arc 6 is formulated to ensure sound, porosity-free welds over a wide range of general shop fabrications. Typical Applications: •Construction •Farm equipment •General shop work •Steel castings or forging salvage •Shaft buildup •Tanks •Automotive Typical Mechanical Properties (AW): Tensile Strength (psi): 85,000 (587 MPa) Yield Strength (psi): 70,000 (485 MPa) Elongation % in 2” (50 mm): 26% Approvals and Conformances: •AWS A5.18, ER70S-6 •ASME SFA A5.18, ER70S-6 •ABS ER705-6 •CWB ER49S-6 Aluminium Electrodes MaxalMig ER5356 •High strength •High ductility, fatigue strength and toughness •Very good color match after anodizing with 5XXX/6XXX base materials Typical Applications: •Applications using base metal 5086 •Truck frames •Shipbuilding •Railcar •Bus panels Typical Mechanical Properties (AW): Tensile Strength (psi): 38,000 (260 MPa) Yield Strength (psi): 21,000 (145 MPa) Elongation % in 2” (50 mm): 13% Approvals and Conformances: •AWS A5.10, ER5356 •ASME SFA 5.10, ER5356 •AWS A5.01, Class S1, Schedule F •CWB •ABS •vdTUV •CE •DB Part No. Diameter 535603004 0.030” (0.8 mm) 1 lb (0.45 kg) Plastic Spool 535603012 0.030” (0.8 mm) 12 lb (5.4 kg) Wire Basket 535603504 0.035” (0.9 mm) 1 lb (0.45 kg) Plastic Spool 535603508 0.035” (0.9 mm) 5 lb (2 kg) Plastic Spool 535603512 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket 535603512P 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket 535603523L 0.035” (0.9 mm) 100 lb (45 kg) Drum 535603523 0.035” (0.9 mm) 300 lb (136 kg) Drum 535604012 0.040” (1.0 mm) 16 lb (7.3 kg) Wire Basket 535604704 3/64” (1.2 mm) 1 lb (0.45 kg) Plastic Spool 535604712 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket 535604712P 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket 535604712P22 3/64” (1.2 mm) 22 lb (10 kg) Plastic Spool 535604723L 3/64” (1.2 mm) 100 lb (45 kg) Drum 535604723 3/64” (1.2 mm) 300 lb (136 kg) Drum 535606212 1/16” (1.6 mm) 16 lb (7.3 kg) Wire Basket 535606223L 1/16” (1.6 mm) 100 lb (45 kg) Drum 535606223 1/16” (1.6 mm) 300 lb (136 kg) Drum 535609412P 3/32” (2.4 mm) 16 lb (7.3 Kg) Wire Basket Diameter •Moderate strength (28ksi/190Mpa typical) •Low melting temperature and high fluidity •Minimizes hot cracking and distortion •Clean, bright welds Typical Applications: •Sport products - scooters/bicycles •General repair and maintenance •Automotive/motorcycle frames and wheels •Welding 6XXX alloys Typical Mechanical Properties (AW): Tensile Strength (psi): 28,000 (190 MPa) Yield Strength (psi): 12,000 (80 MPa) Elongation % in 2” (50 mm): 24% Approvals and Conformances: •AWS A5.10, ER4043 •ASME SFA 5.10, ER4043 •AWS A5.01, Class S1, Schedule F •CWB •CE Part No. Package Size Part No. MaxalMig ER4043 Diameter Package Size 404303004 0.030” (0.8 mm) 1 lb (0.45 kg) Plastic Spool 404303012 0.030” (0.8 mm) 12 lb (5.4 kg) Wire Basket 404303504 0.035” (0.9 mm) 1 lb (0.45 kg) Plastic Spool 404303512 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket 404303512P 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket 404303523L 0.035” (0.9 mm) 100 lb (45 kg) Drum 404303523 0.035” (0.9 mm) 300 lb (136 kg) Drum 404304704 3/64” (1.2 mm) 1 lb (0.45 kg) Plastic Spool 404304712 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket 404304712P 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket 404304712P22 3/64” (1.2 mm) 22 lb (10 kg) Plastic Spool 404304723L 3/64” (1.2 mm) 100 lb (45 kg) Drum 404304723 3/64” (1.2 mm) 300 lb (136 kg) Drum 404306212 1/16” (1.6 mm) 16 lb (7.3 kg) Wire Basket 404306223L 1/16” (1.6 mm) 100 lb (45 kg) Drum 404306223 1/16” (1.6 mm) 300 lb (136 kg) Drum Package Size 494303504 0.035” (0.9 mm) 1 lb (0.45 kg) Plastic Spool 494303512 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket 494303512P 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket 494303523L 0.035” (0.9 mm) 100 lb (45 kg) Drum 494303523 0.035” (0.9 mm) 300 lb (136 kg) Drum 494304704 3/64” (1.2 mm) 1 lb (0.45 kg) Plastic Spool 494304712 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket 494304712P 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket 494304712P22 3/64” (1.2 mm) 22 lb (7.3 kg) Wire Basket 494304723L 3/64” (1.2 mm) 100 lb (45 kg) Drum 494304723 3/64” (1.2 mm) 300 lb (136 kg) Drum 494306212 1/16” (1.6 mm) 16 lb (7.3 kg) Wire Basket 494306223L 1/16” (1.6 mm) 100 lb (45 kg) Drum 494306223 1/16” (1.6 mm) 300 lb (136 kg) Drum MaxalMig ER4943 • 25% higher UTS and 50% higher yield strength than 4043 in as-welded condition •Moderate to high strength (35ksi/240mpa typical) •Low melting temperature and high fluidity •Heat treatable Typical Applications: •Current 4043 and 4643 applications, 1XXX, 3XXX, 5XXX with less than 3.0% Mg (example 5052), and 6XXX •Post weld aged, post weld heatreat and age applications •Automotive/motorcycle frames and wheels •Ladders and furniture Typical Mechanical Properties (AW): Tensile Strength (psi): 35,000 (240 MPa) Yield Strength (psi): 18,000 (125 MPa) Elongation % in 2” (50 mm): 16% Approvals and Conformances: •AWS A5.10, ER4943 •ASME SFA 5.10, ER4943 •AWS A5.01, Class S1, Schedule F •CWB •ABS •CE www.greggdistributors.ca SP04-61 HOBART® HOB/2455 Aluminium Electrodes MaxalTig R5356 •High strength •High ductility, fatigue strength and toughness •Very good color match after anodizing with 5XXX/6XXX base materials Typical Applications: •Applications using base metal 5086 •Truck frames •Shipbuilding •Railcar •Bus panels Typical Mechanical Properties (AW): Tensile Strength (psi): 38,000 (260 MPa) Yield Strength (psi): 21,000 (145 MPa) Elongation % in 2” (50 mm): 13% Approvals and Conformances: •AWS A5.10, R5356 •ASME SFA 5.10, R5356 •AWS A5.01, Class S1, Schedule F •CWB •ABS •CE Part No. 535606270 535606271 535609471 535609470 535612571 535612570 535615670 535618770 Diameter Package Size 1/16” (1.6 mm) 10 lb (4.5 kg) Carton 1/16” (1.6 mm) 1 lb (0.45 kg) Tube 3/32” (2.4 mm) 1 lb (0.45 kg) Tube 3/32” (2.4 mm) 10 lb (4.5 kg) Carton 1/8” (3.2 mm) 1 lb (0.45 kg) Tube 1/8” (3.2 mm) 10 lb (4.5 kg) Carton 5/32” (4.0 mm) 10 lb (4.5 kg) Carton 3/16” (4.8 mm) 10 lb (4.5 kg) Carton MaxalTig R4943 •25% higher UTS and 50% higher yield strength than 4043 in as-welded condition •Moderate to high strength (35ksi/240Mpa typical) •Low melting temperature and high fluidity •Heat treatable Typical Applications: •Current 4043 and 4643 applications, 1XXX, 3XXX, 5XXX with less than 3.0% Mg (example 5052), and 6XXX •Post weld aged, post weld heatreat & age applications •Automotive/motorcycle frames and wheels •Ladders and furniture Typical Mechanical Properties (AW): Tensile Strength (psi): 35,000 (240 MPa) Yield Strength (psi): 18,000 (125 MPa) Elongation % in 2” (50 mm): 16% Approvals and Conformances: •AWS A5.10, ER4943 •ASME SFA 5.10, ER4943 •AWS A5.01, Class S1, Schedule F •CWB •ABS •CE MaxalTig R4043 •Moderate strength (28ksi/190Mpa typical) •Low melting temperature and high fluidity •Minimizes hot cracking and distortion •Clean, bright welds Typical Applications: •Sport products - scooters/bicycles •General repair and maintenance •Automotive/motorcycle frames and wheels •Welding 6XXX alloys Typical Mechanical Properties (AW): Tensile Strength (psi): 28,000 (190 MPa) Yield Strength (psi): 12,000 (80 MPa) Elongation % in 2” (50 mm): 24% Approvals and Conformances: •AWS A5.10, ER4043 •ASME SFA 5.10, ER4043 •AWS A5.01, Class S1, Schedule F •CWB •CE Part No. 404306270 404306271 404309471 404309470 404312571 404312570 404315670 404318770 Part No. 494306270 494309470 494312570 Diameter Package Size 1/16” (1.6 mm) 10 lb (4.5 kg) Carton 1/16” (1.6 mm) 1 lb (0.45 kg) Tube 3/32” (2.4 mm) 1 lb (0.45 kg) Tube 3/32” (2.4 mm) 10 lb (4.5 kg) Carton 1/8” (3.2 mm) 1 lb (0.45 kg) Tube 1/8” (3.2 mm) 10 lb (4.5 kg) Carton 5/32” (4.0 mm) 10 lb (4.5 kg) Carton 3/16” (4.8 mm) 10 lb (4.5 kg) Carton Diameter Package Size 1/16” (1.6 mm) 10 Lb (4.5 Kg) Carton 3/32” (2.4 mm) 10 Lb (4.5 Kg) Carton 1/8” (3.2 mm) 10 Lb (4.5 Kg) Carton Tubular Wires FabCO® RXR - FLAT & HORIZONTAL AWS E70T-1C, E70T-9C •Outstanding welding performance results in excellent operator appeal •Smooth and stable arc produces an easy to control puddle •Easy slag removal reduces cleanup time •Very flexible amperage range promotes versatility Typical Applications: •Storage vessels •Earthmoving equipment •Heavy fabrication •Railcar Typical Mechanical Properties (AW): Tensile Strength (psi): 86,000 (592 MPa) Yield Strength (psi): 75,000 (518 MPa) Elongation % in 2” (50 mm): 26% Approvals and Conformances: •AWS A5.20, E70T-1C, E70T-9C •AWS A5.20M, E490T-1C, E490T-9C •ASME SFA 5.20, E70T-1C, E70T-9C •ABS, 100% CO2, 2YSA H10 •CWB, 100% CO2, E492T-9-H8 (1.2 mm - 2.4 mm diameter electrodes) •AWS D1.8/D1.8M, 100% CO2, 1/16” (1.6 mm) & 3/32” (2.4 mm) diameter electrodes •EN17632-B: T55 2 T1 0 C A H10 •CE Marked per CPR 305/2011 (1.2 mm - 2.4 mm diameter electrodes) •MIL-E-24403/1, MIL-70T-1C Part No. Diameter Package Size S246512-002 0.045” (1.2 mm) 60 lb (27 kg) Coil S246512-029 0.045” (1.2 mm) 33 lb (15 kg) Spool S246512-044 0.045” (1.2 mm) 44 lb (20 kg) Spool S246519-002 1/16” (1.6 mm) 60 lb (27 kg) Coil S246519-029 1/16” (1.6 mm) 33 lb (15 kg) Spool S246519-044 1/16” (1.6 mm) 44 lb (20 kg) Spool S246519-056 1/16” (1.6 mm) 600 lb (272 kg) Exacto-Pak S246525-002 5/64” (2.0 mm) 60 lb (27 kg) Coil S246525-008 5/64” (2.0 mm) 600 lb (272 kg) Drum S246529-002 3/32” (2.4 mm) 60 lb (27 kg) Coil S246529-008 3/32” (2.4 mm) 600 lb (272 kg) Drum S246529-069 3/32” (2.4 mm) 800 lb (363 kg) Flat Reel S246539-002 7/64” (2.8 mm) 60 lb (27 kg) Coil S246539-069 7/64” (2.8 mm) 800 lb (363 kg) Flat Reel SP04-62 GREGG DISTRIBUTORS LTD. FabCO® Excel Arc™ 71 - ALL POSITION AWS E71T-1C/M H8, E71T-9C/M H8 •Low spatter and easy slag removal reduce cleanup time •Increased welder appeal and productivity •Good impact toughness at low temperatures resists cracking in severe applications Typical Applications: •Non-alloyed and fine grain steels •Structural steel •General fabrication •Heavy equipment Typical Mechanical Properties (AW): Tensile Strength (psi): 84,000 (579 MPa) 90,000 (619 MPa) Yield Strength (psi): 77,000 (531 MPa) 83,000 (571 MPa) Elongation % in 2” (50 mm): 28% 26% Approvals and Conformances: • AWS A5.20, E71T-1C H8, E71T-1M H8, E71T-9C H8, E71T9M H8 •AWS A5.20M, E491T-1C H8, E491T-1M H8, E491T-9C H8, E491T-9M H8 •ASME SFA 5.20, E71T-1C H8, E71T-1M H8, E71T-9C H8, E71T-9M H8 •ABS, 100% CO2 S3YM HH (0.045” - 1/16” diameter electrodes) •Burea Veritas, 100% CO2, S3YM HH (0.045” - 1/16” diameter electrodes) •CWB, 100% CO2 E491T-9-H8, 75-80% Ar/Balance CO2, E491T-9M-H8 (1.2 mm - 1.6 mm diameter electrodes) •DNV, 100% CO2, Y40MS (H10) •EN17632-A: T 46 3 P C/M 2 H10 •CE Marked per CPR 305/2011 •Lloyd’s Reigster, 100% CO2, 3YS H10 •AWS D1.8/ D1.8M, 100% CO2 & 75% Ar/25% CO2, (0.045” [1.2 mm] & 1/16” [1.6 mm] diameter electrodes) (0.052” [1.4 mm] diameter 75% Ar/25% CO2 only) •CO2 (0.045" [1.2 mm] and 1/16" [1.6 mm] diameter electrodes) Part No. Diameter Package Size S247108-022 0.035” (0.9 mm) 10 lb (4.5 kg) Spool S247108-029 0.035” (0.9 mm) 33 lb (15 kg) Spool S247112-002 0.045” (1.2 mm) 60 lb (27 kg) Coil S247112-023 0.045” (1.2 mm) 15 lb (7 kg) Spool S247112-029 0.045” (1.2 mm) 33 lb (15 kg) Spool S247112-044 0.045” (1.2 mm) 44 lb (20 kg) Spool S247112-064 0.045” (1.2 mm) 400 lb (181 kg) Exacto-Pak S247115-002 0.052” (1.4 mm) 60 lb (27 kg) Coil S247115-023 0.052” (1.4 mm) 15 lb (7 kg) Spool S247115-027 0.052” (1.4 mm) 50 lb (22.7 kg) Spool S247115-029 0.052” (1.4 mm) 33 lb (15 kg) Spool S247115-044 0.052” (1.4 mm) 44 lb (20 kg) Spool S247115-056 0.052” (1.4 mm) 600 lb (272 kg) Exacto-Pak S247119-002 1/16” (1.6 mm) 60 lb (27 kg) Coil S247119-023 1/16” (1.6 mm) 15 lb (7 kg) Spool S247119-029 1/16” (1.6 mm) 33 lb (15 kg) Spool S247119-044 1/16” (1.6 mm) 44 lb (20 kg) Spool S247119-056 1/16” (1.6 mm) 600 lb (272 kg) Exacto-Pak S247125-002 5/64” (2.0 mm) 60 lb (27 kg) Coil S247125-069 5/64” (2.0 mm) 800 lb (363 kg) Flat Reel HOBART® HOB/2455 Tubular Wires Fabshield XLR-8 - ALL POSITION ® AWS E71T-8JD H8 •Welds out of position at high currents for high productivity •Excellent mechanical properties within a wide range of heat inputs •Self-shielded; can be used outdoors without sheltering •Excellent slag removal reduces cleanup time and risk of inclusion Typical Applications: •Structural steel fabrication •AWS D1.8 Demand Critical welds •Ship and barge construction •Heavy equipment repair Typical Mechanical Properties (AW): Tensile Strength (psi): 84,000 (579 MPa) Yield Strength (psi): 68,000 (469 MPa) Elongation % in 2” (50 mm): 28% Approvals and Conformances: •AWS A5.20, E71T-8JD H8 •AWS A5.20M, E491T-8JD H8 •ASME SFA 5.20, E71T-8JD H8 •ABS, 3YSA H10 (1/16” - 5/64” diameters) •CWB, E491T-8JH8 (1.6 - 2.0 mm diameters) •EN 17632-A: T42 2 Y N 2 H10 •CE Marked per CPR 305/2011 (1.6 - 2.0 mm diameters) •AWS D1.8/D1.8M Conformance [1/16” - 5.64” (1.6 - 2.0 mm) diameters] Part No. Diameter Package Size S225729-014 3/32” (2.4 mm) 50 lb (22.7 kg) Coil S225719-053 1/16” (1.6 mm) 33 lb (15 kg) Vacuum Pkgd Spool S225719-070 1/16” (1.6 mm) 12 lb (5.4 kg) Vacuum Pkgd Spool S225719-082 1/16” (1.6 mm) 20 lb (9 kg) Vacuum Pkgd Spool S225724-053 0.072” (1.8 mm) 33 lb (15 kg) Vacuum Pkgd Spool S225724-070 0.072” (1.8 mm) 12 lb (5.4 kg) Vacuum Pkgd Spool S225724-082 0.072” (1.8 mm) 20 lb (9 kg) Vacuum Pkgd Spool S225725-014 5/64” (2.0 mm) 50 lb (22.7 kg) Coil S225725-053 5/64” (2.0 mm) 33 lb (15 kg) Vacuum Pkgd Spool S225725-082 5/64” (2.0 mm) 20 lb (9 kg) Vacuum Pkgd Spool FabCOR® Edge™ - FLAT & HORIZONTAL AWS E70C-6M H4 •Higher deposition rates help increase travel speed and productivity •Excellent wetting characteristics and gap bridging capabilities •Virtually no silicon deposits at weld bead toe lines reduces cleanup time and minimizes risk of inclusions Typical Applications: •Heavy equipment •Agriculture •Robotic and mechanized welding •Nonalloyed and fine grain steels Typical Mechanical Properties (AW): 91,000 (630 MPa) 97,000 (669 MPa) Tensile Strength (psi): Yield Strength (psi): 81,000 (561 MPa) 87,000 (600 MPa) Elongation % in 2” (50 mm): 25% 22% Approvals and Conformances: •AWS A5.18, E70C-6M H4 •AWS A5.18M, E48C-6M H4 •ASME SFA 5.18, E70C-6M H4 •ABS, 80% Ar/20% CO2, 3YSA H5 (0.045” - 1/16” diameters, flat position) •ABS, 90% Ar/10% CO2, 3YSA H5 (0.035” - 0.045” diameters, all position) •AWS D1.8/D1.8M, 75% Ar/25% CO2 [0.052” (1.4 mm) diameter] •CWB, 75-95% Ar/Balance CO2, E492C-6MJ-H4 (1.4 - 1.6 mm diameter) •CWB, 75-95% Ar/Balance CO2, E491C-6MJ-H4 (1.2 mm diameter) •EN17632-A: T 46 3 M M 3 H5 •CE Marked per CPR 305/2011 (0.9 - 1.6 mm diameter) Part No. Diameter FabCOR 86R ® AWS E70C-6M H4 •High deposition rates and efficiencies improving productivity •Virtually no slag coverage and low spatter levels reduce cleanup time •Smooth arc characteristics improve operator appeal •Low diffusible hydrogen weld deposit minimizes risk of cracking Typical Applications: •Railcar •Storage vessels •Steel structures •Earthmoving equipment Typical Mechanical Properties (AW): Tensile Strength (psi): 81,000 (558 MPa) 85,000 (586 MPa) Yield Strength (psi): 69,000 (476 MPa) 75,000 (517 MPa) Elongation % in 2” (50 mm): 30% 27% Approvals and Conformances: •AWS A5.18, E70C-6M H4 •AWS A5.18M, E48C-6M H4 •ASME SFA 5.18, E70C-6M H4 •ABS, 80% Ar/20% CO2, 3YSA H5 (0.035” - 1/16” diameters) •Bureau Veritas, 80% Ar/20% CO2, S3YMH5 (0.035” - 1/16” diameters) •CWB, 75-95% Ar/Balance CO2, E491C-6MJ-H4 (0.9 mm - 1.6 mm diameters) •CWB, 95% Ar/5% O2, E491C-6MJ-H4 (1.2 mm - 1.6 mm diameters) •DNV, 80% Ar/20% CO2, III Y40MS(H5) •Lloyd’s Register, 80% Ar/20% CO2, 3Y40S H5 •AWS D1.8/D1.8M, 75% Ar/25% CO2, [0.045” (1.2 mm), 1/16” (1.6 mm) diameter] •EN17632-A: T 46 2 M M 3 H5 •CE Marked per CPR 305/2011 (1.2 mm - 1.6 mm diameters) Part No. Diameter Package Size S249412-002 0.045” (1.2 mm) 60 lb (27 kg) Coil S249412-027 0.045” (1.2 mm) 50 lb (22.7 kg) Spool S249412-029 0.045” (1.2 mm) 33 lb (15 kg) Spool S249412-044 0.045” (1.2 mm) 44 lb (20 kg) Spool S249412-050 0.045” (1.2 mm) 500 lb (227 kg) Exacto-Pak S249412-075 0.045” (1.2 mm) 750 lb (340 kg) Exacto-Pak S249412-090 0.045” (1.2 mm) 900 lb (408 kg) Exacto-Pak S249415-002 0.052” (1.4 mm) 60 lb (27 kg) Coil S249415-029 0.052” (1.4 mm) 33 lb (15 kg) Spool S249415-027 0.052” (1.4 mm) 50 lb (22.7 kg) Spool S249415-044 0.052” (1.4 mm) 44 lb (20 kg) Spool S249415-050 0.052” (1.4 mm) 500 lb (227 kg) Exacto-Pak S249415-075 0.052” (1.4 mm) 750 lb (340 kg) Exacto-Pak S249419-002 1/16” (1.6 mm) 60 lb (27 kg) Coil S249419-029 1/16” (1.6 mm) 33 lb (15 kg) Spool S249419-044 1/16” (1.6 mm) 44 lb (20 kg) Spool S249419-075 1/16” (1.6 mm) 750 lb (340 kg) Exacto-Pak S249429-002 5/64” (2.0 mm) 60 lb (27 kg) Coil S249429-008 5/64” (2.0 mm) 600 lb (272 kg) Drum Package Size S279308-029 0.035” (0.9 mm) 33 lb (15 kg) Spool S279308-050 0.035” (0.9 mm) 500 lb (227 kg) Exacto-Pak S279312-002 0.045” (1.2 mm) 60 lb (27 kg) Coil S279312-027 0.045” (1.2 mm) 50 lb (22.7 kg) Spool S279312-029 0.045” (1.2 mm) 33 lb (15 kg) Spool S279312-050 0.045” (1.2 mm) 500 lb (227 kg) Exacto-Pak S279312-075 0.045” (1.2 mm) 750 lb (340 kg) Exacto-Pak S279312-090 0.045” (1.2 mm) 900 lb (408 kg) Exacto-Pak S279315-002 0.052” (1.4 mm) 60 lb (27 kg) Coil S279315-027 0.052” (1.4 mm) 50 lb (22.7 kg) Spool S279315-029 0.052” (1.4 mm) 33 lb (15 kg) Spool S279315-050 0.052” (1.4 mm) 500 lb (227 kg) Exacto-Pak S279315-075 0.052” (1.4 mm) 750 lb (340 kg) Exacto-Pak S279315-090 0.052” (1.4 mm) 900 lb (408 kg) Exacto-Pak S279319-002 1/16” (1.6 mm) 60 lb (27 kg) Coil S279319-029 1/16” (1.6 mm) 33 lb (15 kg) Spool S279319-075 1/16” (1.6 mm) 750 lb (340 kg) Exacto-Pak www.greggdistributors.ca SP04-63 PROCORE AAA/0020 Chrome Tape Measure SAE/METRIC CHROME TAPES METRIC CHROME TAPES Part No. CTM-10, 1/2” wide blade, 10 ft./3 m. Part No. CTM-16, 3/4” wide blade, 16 ft./5 m. Part No. CTM-25, 1” wide blade, 25 ft./7.5 m. Part No. CTM-3M, 1/2” wide blade, 3 m. Part No. CTM-5M, 3/4” wide blade, 5 m. Part No. CTM-8M, 1” wide blade, 8 m. C.H. HANSON CHH/1561 Marking Stamps STANDARD GRADE Recommended Use: Medium to light duty Features: Standard size shank for hand striking PREMIER GRADE Recommended Use: Ideal for prolonged industrial use Features: Larger shank for better impression and tempered for durability and safety 27 PIECE LETTER SETS •Each set contains: 1 of each: All letters (26 pieces A-Z), Ampersand •Tempered shanks for extra safety Part No. Character Shank Size Size STANDARD GRADE 20200 1/8” 20250 3/16” 20300 1/4” PREMIER GRADE 22150 1/8” 22250 3/16” 22350 1/4” 22400 5/16” 22450 3/8” 22550 1/2” DOT (PREMIER GRADE) 26200 1/8” 26250 3/16” 26300 1/4” 26350 3/8” Weight 1/4” x 2-3/8” 5/16” x 2-3/8” 3/8” x 2-5/8” 1.48 lbs 2.14 lbs 3.17 lbs 3/8” x 2¾” 7/16” x 2¾” 1/2” x 3” 9/16” x 3-1/8” 5/8” x 3-1/8” 7/8” x 4” 3.18 lbs 4.14 lbs 5.75 lbs 7.52 lbs 10.69 lbs 17.54 lbs 3/8” x 2¾” 7/16” x 2¾” 1/2” x 3” 5/8” x 3-1/8” 3.11 lbs 4.13 lbs 7.77 lbs 10.20 lbs •Each set contains: 1 of each: 0, 1, 2, 3, 4, 5, 6, 7, 8 (the 6 is used as a 9) •Crowned striking surface ensures full force to the center of the stamp and textured shank provides firm easy grip Part No. Character Shank Size Size STANDARD GRADE 20541 1/8” 20561 3/16” 20581 1/4” PREMIER GRADE 22861 1/8” 22901 3/16” 22941 1/4” 22961 5/16” 22981 3/8” 23021 1/2” DOT (PREMIER GRADE) 26601 1/8” 26621 3/16” 26641 1/4” 26661 3/8” 29100 29150 29200 29250 29300 29350 1/8” Letter Set 1/8” Number Set 1/4” Letter Set 1/4” Number Set 3/8” Letter Set 3/8” Number Set SP04-64 GREGG DISTRIBUTORS LTD. •Each set contains: 1 of each: All letters (26 pieces A-Z), Ampersand, 0, 1, 2, 3, 4, 5, 6, 7, 8 (the 6 is used as a 9) •Fits flat in tool boxes Weight Part No. 1/4” x 2-3/8” 5/16” x 2-3/8” 3/8” x 2-5/8” 0.51 lbs 0.72 lbs 1.07 lbs STANDARD 20624 20625 20626 3/8” x 2¾” 7/16” x 2¾” 1/2” x 3” 9/16” x 3-1/8” 5/8” x 3-1/8” 7/8” x 4” 1.07 lbs 1.40 lbs 1.93 lbs 2.55 lbs 3.38 lbs 6.31 lbs 3/8” x 2¾” 7/16” x 2¾” 1/2” x 3” 5/8” x 3-1/8” 1.06 lbs 1.40 lbs 1.94 lbs 3.34 lbs •1/2” x 3” long steel stamp Part No. 26990, 1/16” size. Part No. 26991, 3/32” size. Character Shank Size Size 1/8” 3/16” 1/4” 1/4” x 2-3/8” 5/16” x 2-3/8” 3/8” x 2-5/8” Weight 2.95 lbs 3.78 lbs 5.14 lbs “DO NOT COPY” STEEL STAMP Part No. 26992, 3/32” size. “MASTER” STEEL STAMP Weight 3.18 lbs 1.91 lbs 6 lbs 2.02 lbs 10.69 lbs 2.14 lbs 36 PIECE LETTER & NUMBER SETS “DO NOT DUPLICATE” STEEL STAMPS •Each letter set contains: 1 of each: All letters (26 pieces A-Z), Ampersand •Each number set contains: 1 of each: 0, 1, 2, 3, 4, 5, 6, 7, 8 (the 6 is used as a 9) •Withstands highly corrosive environments •Ideal for industries where cross contamination resistance are critical Description Offers the most reduced stress mark by producing a character that is impressed in a dot formation. Used where reduced stress marking is required 9 PIECE NUMBER SETS 440C STAINLESS STEEL STAMPS Part No. DOT Part No. 26993, 3/32” size. 29100 KUNY’S KUN/2610 Tool Pouches, Holders, & Carriers CANVAS MESSENGER BAG •Heavy-duty canvas construction •Adjustable waist belt with quick release buckle that can be used as a shoulder strap •Adjustable hoop and loop closure flap •Internal back wall pockets •Heavy-duty stitching Part No. SW-725. JAV/2562 JAVELIN INDUSTRIAL Fab Tools FIRE RETARDANT WELDERS’ UMBRELLA Fits in any Javelin pipe stand. Lightweight and strong. 5.5 ft. diameter size and is able to pivot 45°. Part No. UMB. MILTON MIL/2823 Inflator Gauges INFLATOR TIRE GAUGE For Truck Tires: 10 - 160 psi in 2 lb. increments. 5 ft. hose that has a dual head lock-on. 6” extension with push on/lock coupling. Push-button deflator valve. Meets OSHA regulation 1910, 177 on inflation. Part No. 553. TAPE III/2680 Industrial Tape COLOURED PVC TAPE 3/4” x 66 ft. roll. Part No. COL66-BLU, Blue. Part No. COL66-BRW, Brown. Part No. COL66-GRN, Green. Part No. COL66-GRY, Grey. Part No. COL66-ORG, Orange. Part No. COL66-PUR, Purple. Part No. COL66-RED, Red. Part No. COL66-WHI, White. Part No. COL66-YEL, Yellow. www.greggdistributors.ca SP04-65 GPI® GPI/2443 Fuel Transfer Pumps EZ-8 FUEL TRANSFER PUMPS Ideal for filling small tanks on recreational, lawn, and landscape equipment •Gas station equivalent flowrate •Extremely lightweight design for use on small tanks and barrels •Self-priming low maintenance design •Choose between direct mount or spin collar design that allows versatile mounting positions •Thermal overload protection Part No. 137100-05, Spin Collar. Part No. 137100-01, Direct Mount. SPECIFICATIONS: Flowrate (GPM / LPM): 8 / 30 Voltage: 12-volt DC Type: Rotary Gear Duty Cycle (On / Off): 15 min. / 30 min. Power Cord: 15 ft. (4.6 m) x 14/2 AWG Inlet / Outlet Size: 3/4” / 3/4” Dispensing Hose: 10 ft. (3.0 m) x 5/8” Suction Pipe: Trim-to-Fit Designed for agriculture, automotive and construction applications •18 GPM flowrate, used to fill equipment faster in mobile application •Spin collar design for versatile, end user preferred mounting positions •Extremely long life and trouble-free operation •Cast aluminum construction •Low profile design for increased visibility when used on mobile tanks in pickup trucks •Circuit breaker motor protection Part No. 110300-2, Automatic. Part No. 110300-1, Manual. SPECIFICATIONS: Flowrate (GPM / LPM): 18 / 69 Voltage: 12-volt DC Type: Rotary Gear Duty Cycle (On / Off): 30 min. / 30 min. Power Cord: 18 ft. (5.5 m) 12/2 AWG Inlet / Outlet Size: 1” / 1” Dispensing Hose: 12 ft. (3.7 m) x 1” Suction Pipe: Telescoping to 40” Mount Spin: Collar Nozzle Holder: Lockable Part No. Voltage 12V 12V 12V 24V Designed for stationary locations in fleet, agriculture or industrial applications. •Spin collar design for versatile end user preferred mounting positions •Extremely long life and trouble-free operation •Cast aluminum construction •Internal auxiliary temperature limiting device and circuit breaker motor protection Part No. 110000-82, Automatic. Part No. 110000-81, Manual. SPECIFICATIONS: Flowrate (GPM / LPM): 12 / 45 Voltage: 115-volt AC Type: Rotary Gear Duty Cycle (On / Off): 30 min. / 30 min. Inlet / Outlet Size: 1” / 3/4” Dispensing Hose: 12 ft. (3.7 m) x 3/4” Suction Pipe: Telescoping to 40” Mount: Spin Collar Nozzle Holder: Lockable Nozzle Power Holder Cord Automatic Lockable 18 ft. Manual Lockable 18 ft. Manual Standard 18 ft. Manual Lockable 18 ft. Nozzle Suction Pipe Hose Mount Telescoping Telescoping Trim-to-Fit Telescoping 12 ft. 12 ft. 10 ft. 12 ft. Spin Collar Spin Collar Direct Mount Spin Collar SPECIFICATIONS: Flowrate (GPM / LPM): 15 / 57 Voltage: 12-volt DC / 24-volt DC Type: Rotary Gear Duty Cycle (On / Off): 30 min. / 30 min. Power Cord: 18 ft. (5.5 m) 12/2 AWG Inlet / Outlet Size: 1” / 3/4” Dispensing Hose: 12 ft. (3.7 m) x 3/4” OR 10 ft. (3 m) 3/4” Suction Pipe: Telescoping to 40” OR Trim-to-Fit M-3025 & M-3425 FUEL TRANSFER PUMPS When reduced fueling time is critical, the highflow M-3025 delivers with up to 25 GPM. •Great for filling large capacity tanks on equipment found in construction, agriculture, mining and logging applications •Choose between two types of mount: Weight centering inlet base includes pressure relief and easy strainer access Straight base model with internal strainer •Field-replaceable switch and vanes •40 amp circuit breaker motor protection Part No. Voltage M-1115S FUEL TRANSFER PUMPS 133265-04 133265-03 133240-2 133240-1 133260-02 133260-01 12V 12V 12V 12V 24V 24V Power Hose Cord Auto Diesel 18 ft. 18 ft. Manual 18 ft. 18 ft. Auto Diesel 15 ft. 12 ft. Manual 15 ft. 12 ft. Auto Diesel 15 ft. 12 ft. Manual 15 ft. 12 ft. Nozzle Inlet Mount Center Base Center Base Straight Base Straight Base Straight Base Straight Base SPECIFICATIONS: Flowrate (GPM / LPM): 25 / 95 Voltage: 12-volt DC / 24-volt DC Type: Carbon Vane Duty Cycle (On / Off): 30 min. / 30 min. Inlet / Outlet Size: 1” / 1” Nozzle Holder: Lockable Power Cord: 18 ft. (5.5 m) OR 15 ft. (4.6 m) of 10/3 AWG Dispensing Hose: 18 ft. (5.5 m) x 1” OR 12 ft. (3.7 m) x 1” M-3130 FUEL TRANSFER PUMPS 30 GPM flowrate for stationary tank applications. •Weight centering inlet base includes pressure relief and easy strainer access •Field-replaceable switch and vanes •Internal auxiliary temperature limiting device motor protection Part No. 133220-2, Auto Diesel. Part No. 133220-1, Manual. M-3120 FUEL TRANSFER PUMPS 20 GPM flowrate for stationary tank applications. •Weight centering inlet base includes pressure relief and easy strainer access •Field-replaceable switch and vanes •Internal auxiliary temperature limiting device motor protection Part No. Designed for agriculture, automotive and construction applications •15 GPM flowrate, empties 100 gallon mobile tanks in approximately 7 minutes •Models with spin collar design offer versatile mounting positions •Extremely long life and trouble-free operation •Cast aluminum construction •Low profile design for increased visibility when used on mobile tanks in pickup trucks •Circuit breaker motor protection 110000-100 110000-99 110000-107 110000-70 M-180S FUEL TRANSFER PUMPS 133200-33 133200-2 133200-34 133200-1 M-150S & M-240S FUEL TRANSFER PUMPS Nozzle Hose Auto Diesel Auto Leaded Manual Leaded Manual Leaded 1” 3/4” 1” 3/4” SPECIFICATIONS: Flowrate (GPM / LPM): 30 / 114 Voltage: 115/230-volt AC Type: Carbon Vane Duty Cycle (On / Off): 30 min. / 30 min. Inlet / Outlet Size: 1¼” / 1” Nozzle Holder: Lockable Dispensing Hose: 12 ft. (3.7m) x 1” Inlet Mount: Center Base Thread: NPT SPECIFICATIONS: Flowrate (GPM / LPM): 20 / 76 Voltage: 115-volt AC Type: Carbon Vane Duty Cycle (On / Off): 30 min. / 30 min. Inlet / Outlet Size: 1” / 1” Nozzle Holder: Lockable Dispensing Hose: 12 ft. (3.7 m) x 1” Inlet Mount: Center Base Please consult a Gregg's Representative for additional information about GPI and accessories SP04-66 GREGG DISTRIBUTORS LTD. GPI® GPI/2443/2447 Fuel Transfer Pumps M-150S COMBO FUEL TRANSFER SYSTEMS Designed for agriculture, automotive and construction applications •Combo includes the low profile FM-200 meter and M-150S Pump •Spin collar design offers versatile mounting positions •Extremely long life and trouble-free operation •Cast aluminum construction •Low-profile design for increased visibility when used on mobile tanks in pickup trucks •Meter available in litre model Part No. 110610-14, Automatic nozzle. Part No. 110610-12, Manual nozzle. SPECIFICATIONS: Flowrate (GPM / LPM): 15 / 57 Voltage: 12V DC Type: Rotary Gear Duty Cycle (On / Off): 30 min. / 30 min. Power Cord: 18 ft. (5.5 m) x 12/2 AWG Inlet / Outlet Size: 1” / 3/4” Dispensing Hose: 12 ft. (3.7 m) x 3/4” Suction Pipe: Telescoping up to 40” Nozzle Holder: Lockable Inlet Mount: Spin Collar M-180S COMBO FUEL TRANSFER PUMPS •This combo special includes the M-180S pump, a filter, a filter adapter, and a Filter Installation Kit •This pump and filter combo makes installation quick and easy •Explosion proof motor • To Use With: Gasoline, Up to 15% alcohol blends such as E15, diesel fuel, Up to 20% biodiesel blends such as B20, and kerosene Part No. 110612-02, Automatic nozzle. Part No. 110612-01, Manual nozzle. SPECIFICATIONS: Voltage: 12 Volts DC Mechanical Connection: 1” Inlet / 1” Outlet Flowrate: Up to 18 GPM / 69 LPM Duty Cycle: 30 minutes On / 30 minutes Off Hose: 12 ft (3.7 m) x 1” diameter Power Cord: 18 ft (5.5 m) 12/2 AWG Suction Pipe: Adjustable to 40” M-3120 & M-3130 COMBO FUEL TRANSFER SYSTEMS Designed for Stationary Tank Applications where high flow and long life are desired •Factory assembled GPI Combos are available with the M-3120 or M-3130 pump and include the MR 5-30 meter. Meter is calibrated in litres. •Internal auxiliary temperature limiting device motor protection •Weight centering inlet base includes pressure relief and easy strainer access •Field-replaceable switch and vanes •Tank adapter included Part No. 133600-62, Auto Leaded. Part No. 133600-61, Manual. Part No. 133601-61, Auto Diesel. Part No. 133601-60, Manual. SPECIFICATIONS: Flowrate (GPM / LPM): 20 / 76 Voltage: 115-volt AC Type: Carbon Vane Duty Cycle (On / Off): 30 min. / 30 min. Inlet / Outlet Size: 1” / 1” Dispensing Hose: 12 ft. (3.7 m) x 3/4” SPECIFICATIONS: Flowrate (GPM / LPM): 30 / 114 Voltage: 115- or 230-volt AC Type: Carbon Vane Duty Cycle (On / Off): 30 min. / 30 min. Inlet / Outlet Size: 1¼” / 1” Dispensing Hose: 12 ft. (3.7 m) x 1” CABINET MODEL FUEL TRANSFER SYSTEMS For fleet operations, golf courses and equipment yards •Choose a 115-volt or 230-volt pump. Both deliver up to 20 GPM (76 LPM) •Includes MR 5-30 mechanical meter with twist knob reset and large readout •Includes tank adapter for easy installation •Nozzle holder and hanger accommodates most gas and diesel nozzles (manual, automatic and vapor recovery) •Hose and nozzle sold separately •Powder-coated exterior improves corrosion resistance •Performs well in salt-spray environments •Accessories come with stainless steel hardware Part No. 143620-02, 115V. Part No. 143620-05, 230V. SPECIFICATIONS: Flowrate (GPM / LPM): 20 / 76 Voltage: 115-volt AC or 230-volt AC Type: Carbon Vane Duty Cycle (On / Off): 30 min. / 30 min. Inlet / Outlet Size: 1” / 1” Inlet Mount: 2” REMOTE DISPENSER FUEL TRANSFER PUMPS Assemble a system that will provide ground-level access to your meter and nozzle on above ground tanks in 4 easy steps. 1 Choose the Remote Dispenser Includes: Dispenser, Nozzle Holder, Solenoid Valve and MR 5-30 Meter Part No. 143650-02, Litre units. 2 Purchase the 20 or 30 GPM pump that best meets your needs. Part No. 133200-10, Flowrate (GPM / LPM): 20 / 76, Voltage: 115-volt AC. Part No. 133220-05, Flowrate (GPM / LPM): 30 / 114, Voltage: 115- or 230-volt AC. 3 Add the correct Vacuum Breaker Kit for your pump Part No. 13353302. Part No. 13353303. 4 Finish your installation with the proper accessories Part No. 143500-07, Mounting shelf kit. Part No. 133511-02, Cabinet Base. Part No. 906005-501, 1” Auto diesel nozzle. Part No. 110121-8, 3/4” Automatic unleaded nozzle. 110121-8 133200-10 13353302 Please consult a Gregg's Representative for additional information about GPI and accessories 133511-02 906005-501 www.greggdistributors.ca SP04-67 GPI® GPI/2443 Speciality Pumps AVIATION PUMPS Aviation Pumps & Meters are only intended to be ground-based or vehicle mounted. Do not use or mount in or on the aircraft. For use with: Aviation gasoline (AVGAS 100LL) and kerosene grade (JET A). User should consult NFPA 407 Standard for Aircraft Fuel Servicing for safety requirements during ground fuel servicing of aircraft using liquid petroleum fuels. This product has no actual or implied compliance with this standard. Aviation Combo Part No. 133240-202, Comes with #133240-200 and 126300-202. Part No. 133600-201, Comes with #133600-200 and 126300-201. Part No. 133601-202, Comes with #133601-200 and 126300-202. Meter Part No. 126300-202, Litre. Aviation Pump Part No. 110000-200, 12V, Flowrate (GPM / LPM): 15 / 57. Part No. 133240-200, 12V, Flowrate (GPM / LPM): 25 / 95 Part No. 133600-200, 115V, Flowrate (GPM / LPM): 20 / 76 Part No. 133601-200, 115/230V, Flowrate (GPM / LPM): 30 / 114 METHANOL PUMPS HEAVY-DUTY OIL PUMPS •Designed for the growing alternative fuels market •Industry uses include oil and gas and racing •Compatible with ethanol 110700-04 •Specifically designed for use with high viscosity fluids. •Consider the viscosity of the fluid and temperature range when choosing the oil pump for your application •For use with: Oil (up to 90W), waste oil, hydraulic fluid, anti-freeze and non-flammable oil-based solvents. Do not use with gasoline or diesel fuel. Part No. 137700-01 110700-01 MOTOR Flowrate Voltage 142100-03 16 QPM / 15 LPM 12V DC 142100-01 16 QPM / 15 LPM 115/230V AC 142100-02 32 QPM / 30 LPM 115/230V AC Part No. 110700-04 137700-01 110700-01 Model No. EZ-8 M-150S M-1115S Flowrate (GPM / LPM) 8 / 30 15 / 57 12 / 45 Voltage 12V DC 12V DC 115V DC Type GearGearGear Duty Cycle (On / Off) 15 min. / 30 min. 30 min. / 30 min. 30 min. / 30 min. Inlet / Outlet Size 3/4” / 3/4” 1” / 3/4” 1” / 3/4” Inlet Mount Spin Collar Spin Collar Spin Collar Housing Nickel Plated Nickel Plated Nickel Plated SPECIFICATIONS: Type: Gerotor Nozzle: 3/4”. Ball Valve Duty Cycle (On / Off): 30 min. / 30 min. Inlet / Outlet Size: 1”. / 3/4” Inlet Mount: Center Base Dispensing Hose: 8 ft. (2.5 m) x 3/4” Suction Pipe :Trim-to-Fit Housing: Aluminum LIGHTWEIGHT OIL PUMPS 12V CHEMICAL PUMPS Specifications •Designed specifically for use with thin to medium viscosity petroleum fluids and up to 30W oil. •Lightweight design is easy to move between barrels and drums. •Do not use with gasoline, diesel fuel or waste oil. Part No. Flowrate Voltage Power Cord 118000-9 8 GPM / 30 LPM 12V DC 15 ft. (4.6 m) of 10/3 118003-11 8 GPM / 30 LPM 115V AC 3 ft. (.91m) SPECIFICATIONS: Type: Gear Nozzle: 1” Ball Valve Duty Cycle (On / Off): 30 min. / 30 min. Inlet / Outlet Size: 1” / 1” Inlet Mount: Spin Collar Dispensing Hose: 12 ft. (3.7 m) x 1” Suction Pipe: Telescoping to 40” Housing: Polypropylene 118000-9 Power Cord None 3 ft. (.91m) 3 ft. (.91m) MOTOR UL RECOGNIZED COMPONENT 142100-01 Recommended Use: •#118000-2: Medium/Thick Chemicals (10 to 450 centipoise viscosity). Do not use with gasoline, diesel fuel or micro-encapsulated chemicals. •#118000-1: Thin Chemicals (0 to 10 centipoise viscosity). Do not use with gasoline, diesel fuel or micro-encapsulated chemicals. Power Includes Cord 118000-2 8 GPM / 30 LPM 15 ft. 2” Union Ring 118602-10 8 GPM / 30 LPM 15 ft. Tote-a-Pump Assembly 118000-1 12 GPM / 45 LPM 20 ft. 2” Union Ring Part No. Flowrate SPECIFICATIONS: Voltage: 12-volt DC Type: Gear Duty Cycle (On / Off): 30 min. / 30 min. Inlet / Outlet Size: 1” / 1” Inlet Mount: Direct Mount Housing: Plastic 118602-10 115V CHEMICAL PUMPS Recommended Use: •#118003-2: Medium/Thick Chemicals (10 to 450 centipoise viscosity). Do not use with gasoline, diesel fuel or micro-encapsulated chemicals. •#118003-1: Thin Chemicals (0 to 10 centipoise viscosity). Do not use with gasoline, diesel fuel or micro-encapsulated chemicals. Part No. 118003-2 118602-12 118003-1 118602-11 Flowrate Includes 8 GPM / 30 LPM 2” Union Ring 8 GPM / 30 LPM Tote-a-Pump Assembly 12 GPM / 45 LPM 2” Union Ring 12 GPM / 45 LPM Tote-a-Pump Assembly SPECIFICATIONS: Voltage: 115-volt AC Type: Gear Duty Cycle (On / Off): 30 min. / 30 min. Power Cord: 3-Prong Grounded Plug Inlet / Outlet Size: 1” / 1” Housing: Plastic SP04-68 GREGG DISTRIBUTORS LTD. 118003-2 Please consult a Gregg's Representative for additional information about GPI and accessories GPI® GPI/2444-47 DEF Pumps & Meter BUILD YOUR OWN DEF BARREL SYSTEM •Closed systems are designed to maintain consistent product purity •Use with closed valves 1 2 Choose the correct coupler for your closed container valve Purchase your DEF pump kit DEF PUMP KIT •Lever action pump •Designed for drums up to 36” •Use with single-use, disposable/ recyclable containers •Reusable – durable stainless steel construction provides years •Nozzle, dispensing and suction hoses included Part No. 118450-33. of service SPECIFICATIONS: Part No. 118450-52, Keyed System. Connects to EPV 3A Flowrate: 1 pint per stroke orange container valve. Nozzle: Ball Valve Part No. 118450-53, Diesel exhaust fluid 4-pin keyed system. Inlet / Outlet Size: 3/4” / 1” hose barb Connects to RSV container valve. Dispensing Hose: 72” Clear Tubing DISPENSE COUPLERS 3 Mount with barrel bracket BARREL BRACKET Part No. 118450-51. CLOSED TOTE SYSTEMS •Universal Design to work with most totes •Kits include all parts needed to dispense product •Powder coated shelf for universal cage mounting Part No. Power Cord Voltage 118450-30 Three-prong connector 115V AC 118450-32 20 ft. with Clamp Kit 12V DC 118450-52 SPECIFICATIONS: Flowrate (GPM / LPM): 12 / 45 Type: Gear Nozzle: Automatic Stainless Steel Duty Cycle (On / Off): 30 min. / 30 min. Inlet / Outlet Size: 1” / 1” Dispensing Hose: 12 ft. x 3/4” Suction Hose: 60” Mounting Bracket: Tote Bracket Micro Matic Coupler: RSV 118450-53 DEF METER Part No. 120000-32. SPECIFICATIONS: Construction | Type: PBT Polyester - Electronic Disc Flow Range (GPM / LPM): 2-20 / 7-76 Thread Size: 1” Powered By: One alkaline 9 Volt battery Accuracy: +/– 2% of reading Pressure Rating: 50 PSI Field Calibration: Yes Display: 6-digit LCD Hand Pumps HP-100 HAND PUMPS •Lever action piston pump with lockable handle •Dual-flo® handle provides high volume and low volume settings. •Pumps fluid on both the push and pull strokes for fast delivery. •Built-in anti-siphon valve •For Use with: Gasoline, diesel fuel, kerosene, medium oil (up to 30W) and hydraulic fluid Part No. 114000-5, Thermoplastic nozzle. Part No. 114000-10, Metal nozzle. SPECIFICATIONS: Flowrate (GPM / LPM): Up to 50 Gal / 189 Litres per 100 Strokes Type: Piston Inlet / Outlet Size: 1” / 3/4” Tank Fitting: 2” Dispensing Hose: 8 ft. (2.5 m) x 3/4” Suction Pipe: Telescoping to 40” HP-90 HAND PUMP DP-20 HAND PUMPS SPECIFICATIONS: Flowrate (GPM / LPM): 25 / 95 per 100 Strokes Type: Piston Inlet / Outlet Size: 1” / 3/4” Tank Fitting: 2” Dispensing Hose: 8 ft. (2.5 m) x 3/4” Suction Pipe: Trim-to-Fit SPECIFICATIONS: Flowrate (GPM / LPM): 20 / 76 per 100 Strokes Type: Diaphragm Nozzle: Thermoplastic Inlet / Outlet Size: 1” / 3/4” Tank Fitting: 2” Dispensing Hose: 8 ft. (2.5 m) x 3/4” Suction Pipe: Telescoping to 40” •Lever action piston pump •Pumps fluid on both the push and pull strokes for fast delivery •Built-in anti-siphon valve •For Use with: Gasoline, diesel fuel and kerosene. Light oil (up to 10W) and hydraulic fluid Part No. 131000-1, Thermoplastic nozzle. Please consult a Gregg's Representative for additional information about GPI and accessories •Lever action diaphragm pump with lockable handle •Can be used for dirty or contaminated fluids •For Use with: Gasoline, diesel fuel, kerosene, medium oil (up to 30W) and hydraulic fluid Part No. 138000-01, Buna-N® hose. Part No. 138000-02, U.L. Listed hose. www.greggdistributors.ca SP04-69 GPI® GPI/2444/2445 Hand Pumps RP-10 HAND PUMP RP-5 HAND PUMP SPECIFICATIONS: Flowrate (GPM / LPM): 10 / 38 per 100 Revolutions Type: Rotary Nozzle: Metal Inlet / Outlet Size: 1” / 3/4” Tank Fitting: 2” Dispensing Hose: 8 ft. (2.5 m) x 3/4” with Static Wire Suction Pipe: Telescoping to 40” SPECIFICATIONS: Flowrate (GPM / LPM): 8 / 30 per 90 Revolutions Type: Rotary Nozzle: Spout Tank Fitting: 2” Suction Pipe: Three-Piece Metal BP-12 HAND PUMP CP-5 HAND PUMP BP-10 HAND PUMP SPECIFICATIONS: Flowrate: Up to 1 Pint per Stroke Type: Piston Nozzle: Spout Tank Fitting: 2” Suction Pipe” Telescoping to 36” SPECIFICATIONS: Flowrate: Up to 8 Ounces per Stroke Type: Piston Nozzle: Clear tubing SPECIFICATIONS: Flowrate: Up to 1.5 Pints per Stroke Type: Piston Nozzle: Spout Tank Fitting: 2” Suction Pipe: Telescoping to 36” FM-100 & FM-200 MECHANICAL FUEL METERS DR 5-30 DIGITAL FUEL METERS •Rotary action pump with lockable handle for security •Built-in anti-siphon valve •For Use with: Gasoline, diesel fuel, kerosene, medium oil (up to 30W) and hydraulic fluid Part No. 123000-06. •Lever action piston pump •Convenient lever handle on a barrel pump •For Use with: Lightweight petroleum products, oils, antifreeze and kerosene. Part No. 129010-1. •Basic, rotary action pump •For Use with: Petroleum based fluids having a flash point above 38°C (100°F). Diesel fuel and kerosene. Light oil (up to 10W) and hydraulic fluid. Do not use with gasoline. Part No. 129003-1. •Plunger action piston pump •Very portable and requires no special tools to install. Slips into a five gallon pail. •For Use with: Hydraulic fluids, transmission fluids or motor oils Part No. 129002-1. LP-50 HAND PUMP •Lever action pump •Works with drums up to 36 in. •For Use with: Water, Antifreeze, Diesel Fuel, Petroleum Based Products, Mild Detergents, Lubricants and most Ag Chemicals. Not for use with kerosene, Roundup® Concentrate or Flammable Fluids. Part No. 129000-1. SPECIFICATIONS: Flowrate: Up to 1 Pint per Stroke Type: Piston Nozzle: Spout Tank Fitting: 2” Suction Pipe: Telescoping to 36” •Basic plunger action pump •Removable spout for garden hose attachment •For Use with: Petroleum products such as light oil (up to 10W), transmission fluid and hydraulic fluid. Part No. 129020-1. Meters MR 5-30 MECHANICAL FUEL METERS •Versatile mounting positions with included inlet/outlet fittings •Rotatable register for desired flow direction •Batch and cumulative display •Compatible with Pulser Kit #126517-05 (sold separately) •Liter units Part No. 126300-02, 3/4” Thread. Part No. 126300-04, 1” Thread. Part No. 126300-06, 1½” Thread. SPECIFICATIONS: Construction | Type: Aluminum - Nutating Disc Flow Range (GPM / LPM): 5 to 30 / 19 to 114 Accuracy: +/– 2% of reading Pressure Rating: 50 PSI (3.4 bar) Field Calibration: Yes •Factory calibrated •The FM100 has a built-in filter that protects equipment being fueled •For Use with: Gasoline, Gasohol, diesel fuel and kerosene. Do not use with water or chemicals. •Liter units FM-100 Series Part No. 111200-19, 3/4” Thread. Part No. 111200-10, 1” Thread. FM-200 Series Part No. 111200-21, 3/4” Thread. Part No. 111200-13, 1” Thread. SPECIFICATIONS: Construction: Aluminum Type: Mechanical Nutating Disc Flow Range (GPM / LPM) :4 to 20 / 15 to 76 Accurac:y +/– 2% of reading Pressure Rating: 50 PSI (3.4 bar) Field Calibration: Yes Display: Max. Batch total: 4-digits Cumulative total: 5-digits (gallons) / 6-digits (liters) SP04-70 GREGG DISTRIBUTORS LTD. •Preprogrammed for seven different units of measure: Barrels (42 g), Imperial Gallons, Litres, Ounces, Pints, Quarts and US Gallons •Front panel access to batch reset and field calibration •Provides an open collector signal to customer supplied remote device •For Use with: Gasoline, diesel fuel and kerosene. Do not use with water or chemicals. Part No. 126300-11, 3/4” Thread. Part No. 126300-12, 1” Thread. Part No. 126300-13, 1½” Thread. SPECIFICATIONS: Construction: Aluminum Type: Nutating Disc Flow Range (GPM / LPM): 5 to 30 / 19 to 114 Powered By: Four AA Batteries Accuracy: +/- 2.00% Factory Calibration +/- 1.00% Field Calibration Pressure Rating: 50 PSI (3.4 bar) Field Calibration: Yes Certifications: U.L. 913, Intrinsically Safe for Class I, Division 1, Group D. U.L. 25, Meters for Flammable and Combustible Liquids. Please consult a Gregg's Representative for additional information about GPI and accessories GPI® GPI/2444/2447 Meters 01A SERIES DIGITAL FUEL METER LM51DN OIL METER LM-300 OIL METER SPECIFICATIONS: Construction: Aluminum Type: Turbine Flow Range (GPM / LPM): 3 to 30 / 10 to 100 Powered By: Two alkaline AAA batteries Accuracy: +/– 5.0% of reading Pressure Rating: 300 PSI Field Calibration: No Certifications: FM Approved as Intrinsically Safe for Class I, Division 1 Groups A thru G. U.L. classified to Canadian Standards. ATEXANNEX VIII. CE. SPECIFICATIONS: Construction: Aluminum Type: Oval Gear Flow Range (GPM / LPM): 0.26 to 7.8 / 1 to 30 @ 5-1,000 cps Powered by: Lithium Battery Accuracy: +/– 0.5% of reading Pressure Rating: 1500 PSI Thread Size: 1/2” NPT Field Calibration: No Units: Gallon / Litre SPECIFICATIONS: Construction: PBT Polyester Type: Nutating Disc Flow Range (QPM / LPM): 8 to 80 / 7.5 to 76 Inlet/Outlet: 1” (3/4” Bushings Included) Powered By: One alkaline 9 Volt battery Accuracy: +/– 2% of reading Pressure Rating: 50 PSI Field Calibration: Yes Units: Gallons, Quarts, Litres & Ounces FM-100H CHEMICAL METER FM-300H CHEMICAL METER 01N WATER METER SPECIFICATIONS: Construction: Aluminum Type: Mechanical Nutating Disc Flow Range (GPM / LPM): 4 to 20 / 15 to 76 Accuracy: Factory: +/– 2% of reading Field: +/– 1% of reading Pressure Rating: 50 PSI (3.4 bar) Field Calibration: Yes Display: 4-digits SPECIFICATIONS: Construction | Type: PBT Polyester Type: Nutating Disc Flow Range (GPM / LPM): 2 to 20 / 7 to 76 Thread Size: 1” Powered By: One alkaline 9 Volt battery Accuracy: Factory: +/– 2% of reading Field: +/– 0.5% of reading Pressure Rating: 50 PSI (3.4 bar) Field Calibration: Yes Display: Maximum value is 999,999 (x 100) SPECIFICATIONS: Construction: Nylon Type: Electronic Digital Flow Range (GPM / LPM): 3 to 30 / 10 to 100 Thread Size: 1” Powered By: Two alkaline AAA batteries Pressure Rating: 150 PSI Field Calibration: No Display: 4-digit LCD •Compact and lightweight at just 12 oz. •Mount directly to the nozzle for easy reading •Includes 3/4” reducer fitting and 3/4” x 1½” pipe fitting •Litre unit Part No. 113255-2, 1” Thread. •Keeps both Batch and Cumulative totals. •For Use with: Most herbicides and other chemicals compatible with meter materials. Do not use with water. •Litre units Part No. 111200-16, 1” Thread. •Gallons, litres, pints or quarts display •Designed with oval rotors for optimum accuracy •For use with: Engine oils, transmission fluid (maximum viscosity SAE 140) or antifreeze. Do not use with excessively dirty fluids or fluids with particles without installing a filter. Part No. LM51DN. •Electronic display keeps Batch and Cumulative totals. Mounts easily on hose end, pump or fluid transfer system. •For Use with: Fertilizers, oil, pesticides and water. Do not use with gasoline, diesel or flammable liquids. •Litre/Imperial Gallon units Part No. 120000-2. •For Use with: Motor oil, gear oil, hydraulic oil, antifreeze, ATF and waste oil. Do not use with flammable fluids or antifreeze that exceeds 50% water. Part No. 120000-28. •Compact and lightweight at just 12 oz. •Mount directly to the nozzle for easy reading •For Use with: Water •Litre units Part No. 113255-5. TM SERIES WATER METER •Sturdy construction with easy access to internal parts. •For Use with: Water or mild chemicals Specifications TM050-N TM075-N TM100-N TM150-N TM200-N Size 1/2” 3/4”1”1½” 2” Flow Rate (GPM) 1-10 2-20 5-50 10-100 20-200 CABINET MODEL ACCESSORIES Part No. 133170-01, Pedestal Kit: includes base, 2” x 24” pipe and 2” NPT coupler. DEF ACCESSORIES Part No. 906008-03, Automatic Nozzle. Stainless Steel 3/4” hose barb inlet. Part No. 906008-02 Manual Nozzle. Polypropylene, Stainless Steel 3/4” hose barb inlet Part No. 906008-04, Ball Valve Nozzle 1” hose barb inlet. Part No. 118450-61, 6 ft. DEF Tubing 1”x 6 ft. Part No. 118450-62, 12 ft. DEF Hose 3/4” x 12 ft. Part No. 118450-63, 20 ft. DEF Hose 3/4”x 20 ft. FUEL FILTER KITS SPECIFICATIONS: Construction: Schd. 80 PVC Type: Turbine Powered By: Two lithium batteries Accuracy: +/– 3.0% of reading Pressure Rating: 225 PSI Field Calibration: Yes Display: 6-digit LCD Units: Gallon / Litre Accessories Part No. 133527-01, 3/4”. Includes: 3/4” NPT cast iron adapter, 10 micron filter, and 3/4” x 4” nipple. Part No. 133537-01, 1”. Includes: 1” NPT aluminum filter adapter 1 1/2 - 16 UNF, 30 micron particulate filter, 1” NPT x 7” galvanized pipe nipple, 1” NPT x 3” galvanized pipe nipple, 1” NPT x 1.5” (Close) galvanized pipe nipple, 1” NPT galvanized street elbow, and 1” NPT galvanized elbow. FUEL FILTER KITS Part No. 906006-52, Cast Iron Adapter: 3/4” NPT for 18 GPM - 14 UNF. Part No. 906004-88, Cast Iron Adapter: 1” NPT for 18 GPM, 1 - 12 UNF. Part No. 129420-01, Cast Iron Adapter: 1” NPT for 18 GPM, 1-3/8 - 12 UNF. Part No. 906005-67, Aluminum Adapter: 1” NPT for 30 and 40 GPM, 1-½ - 16 UNF. 906005-67 906008-03 133527-01 118450-63 Please consult a Gregg's Representative for additional information about GPI and accessories 906004-88 www.greggdistributors.ca SP04-71 GPI® GPI/2447 Accessories FUEL FILTERS Part No. 129300-01, Particulate Filter: (18 GPM/67 LPM) 10 micron, 1 - 12 UNF. Part No. 129340-02, Particulate Filter: (18 GPM/67 LPM) 10 micron, 1 - 12 UNF. Includes Draincock Part No. 129340-01, Particulate Filter: (18 GPM/67 LPM) 10 micron, 1-3/8 - 12 UNF. Includes Draincock Part No. 129320-01, Particulate Filter: (30 GPM/113 LPM) 10 micron, 1 ½ - 16 UNF. Part No. 129300-02, Water & Particulate Filter: (18 GPM/67 LPM) 10 micron, 1 - 12 UNF. Part No. 129320-02, Water & Particulate Filter: (30 GPM/113 LPM) 10 micron, 1½ - 16 UNF. Part No. 129340-04, Water & Particulate Filter: (Bio-Tek®) (25 GPM/95 LPM) 2 micron, 1 - 12 UNF. Part No. 129340-05, Water & Particulate Filter: (Bio-Tek®) (40 GPM / 151 LPM) 2 micron, 1½ - 16 UNF. CONVERSION & OVERHAUL KIT Includes: Two gears, Drive key and replacement seals for the gear cover motor shaft (use motor shaft seal to convert existing pump to B100 compatible), Poppet, Strainer, and Switch cover plate. Part No. 110504-1. HERBICIDE KIT Includes: Hose, Ball Valve Nozzle, and Adjustable Suction Pipe for 2” bung. Part No. 111502-2. HYDRAULIC FILTERS Part No. 129922-01, 10 micron. Part No. 129923-01, 25 micron. REMOTE DISPENSER PUMPS & BREAKER KITS KITS Part No. 133514-01, Pump Vapor Recovery Kit. Part No. 143500-07, Shelf Kit: For the MR 5-30 Remote Dispenser unit. Part No. 13353302, Vacuum Breaker Kit: For M-3120. Part No. 13353303, Vacuum Breaker Kit: For M-3130. METER ACCESSORIES Part No. 113520-1, Battery Replacement Kit: (For 03 and TM Series meters) Two lithium batteries. Part No. 116000-1, Calibration Container: 5 Gallon (Do not use for fuel.) Part No. 906004-85, Computer Cover: (For 03 and TM Series meters) Single Access Port. Part No. 906004-86, Computer Cover: (For 03 and TM Series meters) Dual Access Port. Part No. 126530-09, MR 5-30 Series Seal Kit: Two fitting O-rings and a housing O-ring. Part No. 111506-2, FM-100 Series Overhaul Kit: Replacement seals and O-rings. Part No. 901002-52, Meter O-ring: Seals the computer to the turbine housing. Fits Meter Models 01 and 03. Part No. 126517-05, Pulser Kit for MR 5-30: 115-volt AC. PUMP ACCESSORIES Part No. 110527-1, Battery Clamp Kit. Part No. 133263-01, Battery Clamps: Heavy Duty. Part No. 110909-1, Bung Adapter Kit: 2” NPT bung adapter. Part No. 133511-02, Cabinet Base Assembly. Part No. 906001-4, Pressure Vent Cap Assembly. 110527-1 Part No. 906004-62, Replacement Cap: (For Vent Cap Assembly). Part No. 11080801, Security Collar: Plastic. Part No. 11081801, Security Collar: Aluminum. Part No. 110905-1, Shear Key Kit: Shear key for any gear pump. Part No. 110243-01, Suction Pipe: Steel, Adjustable from 22 to 40”. Part No. 110100-1, Suction Pipe: Plastic, Adjustable from 22 to 40”. Part No. 115527-2, Suction Pipe Extension Kit: 15” (38 cm). Part No. 110531-01, Switch Kit: (Fits M-120, M-150, M-1100, M-150S, M-180S, M-240S models). Part No. 121231-1, Tank Adapter: 2” x 1” FNPT. Part No. 121231-5, Tank Adapter: 2” x 1¼” FNPT. Part No. 13750005, Overhaul Kit for EZ-8: Motor shaft key, two gears and a set of replacement seals. Part No. 114505-2, Overhaul Kit for HP-100 Hand Pump: Piston ring, three seals, packing seals and liner. Part No. 123503-1 Overhaul Kit for RP-10 Rotary Hand Pump: Vanes, springs, O-rings and gasket. Part No. 133504-1, Seal Kit: Four replacement seals. Part No. 133503-1, Shaft Seal Kit: Retaining ring, shaft seal and spacer washer. 114505-2 Part No. 133501-1, Vane Kit: Shaft key, eight 1.25” vanes and one seal. Part No. 133502-1, Vane Kit: Shaft key, eight 2” vanes and one seal. 133501-1 NOZZLE ACCESSORIES Part No. 906004-598, Automatic Leaded Nozzle (U.L. Listed): 3/4” NPT, curved spout for M-3120. Part No. 110121-8, Automatic Unleaded Nozzle: 3/4” NPT, straight spout for M-150S, M-180S, M-240S, and M-1115S Series. Part No. 906001-506, Manual Leaded Nozzle: 3/4” NPT, straight spout for M-3120 pump. Part No. 110155-4, Manual Leaded Nozzle: 1 in. NPT for M-180S. Part No. 906001-10, Manual Leaded Nozzle: 1” NPT, straight spout for M-3130 pump. Part No. 110155-1, Manual Unleaded Nozzle: 3/4” NPT for M-150S, M-240S and M-1115S Series. 110155-4 HOSE & NOZZLE KIT For HP-100 and RP-10 Series. Part No. 114504-3. Please consult a Gregg's Representative for additional information about GPI and accessories 110909-1 121231-5 11080801 SP04-72 GREGG DISTRIBUTORS LTD. RIDGID® RID/3337 Red Wet/Dry Vacuum Cleaners 4 GALLON PORTABLE WET/DRY VAC - 4000RV •Powerful 5.0 Peak Horsepower - High performance wet/dry vacuum in a compact package. •Longer motor life - Durable, long-lasting motor backs industry’s best warranty •Cord-Wrap/Large Handle •Rugged Polypropylene Drum Construction •4 Gallon Drum •Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging and can be stored on-board. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Car Nozzle, Noise Muffler/Diffuser, and Fine Dust Filter. Part No. 50313. 4.5 GALLON PROPACK® WET/DRY VAC - 4500RV •5.0 Peak Horsepower - High performance wet/dry vacuum •Longer motor life - Durable, long-lasting motor backs industry’s best warranty. •Unique Design - Stores hose, accessories and 20 ft. power cord inside the vac keeping everything organized and close at hand •Large Cushioned Handle •Flat top work surface •Rugged Polypropylene Drum Construction •4.5 Gallon Drum •1-7/8” ultra-flexible locking hose - Won’t pull loose during use, and the 2 ft. compact hose extends to 7 ft. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners. Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 2 to 7 ft. Expanding Hose, Utility Nozzle, Dusting Brush, Crevice Tool, and Fine Dust Filter. Part No. 50318. 6 GALLON WET/DRY VAC - 6000RV •Incredible 4.25 Peak Horsepower - High performance wet/dry vacuum •Longer motor life - Durable, long-lasting motor backs industry’s best warranty •360º Caster Wheels •Accessory Storage - Keeps accessories organized and close by for easy access •Large Handle •Rugged Polypropylene Drum Construction •10 ft. power cord for extended reach. •6 Gallon Drum •Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging and can be stored on-board. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Utility Nozzle, and Standard Filter. Part No. 50308. 12 GALLON WET/DRY VAC - 1200RV •Powerful 5.0 Peak Horsepower - High performance wet/dry vacuum •Longer motor life - Durable, long-lasting motor backs industry’s best warranty •360º Caster Wheels • Accessory Storage - Keeps accessories organized and close by for easy access •Cord-Wrap/Large Handle •Rugged Polypropylene Drum Construction •12 Gallon Drum •Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging and can be stored on-board. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large Drain - Located to lowest point of drum for emptying of water •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Car Nozzle, and Standard Filter. Part No. 50323 . www.greggdistributors.ca SP04-73 RIDGID® RID/3337 Red Wet/Dry Vacuum Cleaners 14 GALLON WET/DRY VAC with CART - 1400RV •Powerful 6.0 Peak Horsepower - High performance wet/dry vacuum •Longer motor life - Durable, long-lasting motor backs industry’s best warranty •Sturdy Cart, Push Handle and Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain and thresholds •Accessory Storage Bag •Cord-Wrap/Large Handle •2-Piece Rugged Polypropylene Drum Construction •14 Gallon Drum • Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac •Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large Drain - located to lowest point of drum for emptying of water •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Crevice Tool, Car Nozzle, and Fine Dust Filter Part No. 50348. 16 GALLON WET/DRY VAC with DETACHABLE BLOWER - 1620RV •Detachable Blower - The high performance vacuum has an integrated detachable blower for maximum versatility. This is 2 tools in 1. •Top of the line 6.5 Peak Horsepower - High performance wet/dry vacuum provides optimum power •Longer motor life - Durable, long-lasting motor backs industry’s best warranty •360º Caster Wheels •Accessory Storage Caddy •Quick Release Cord-Wrap - The cord-wrap not only stores the 20 ft. power cord, but the tab rotates to quickly release the cord •2-Piece Rugged Polypropylene Drum Construction •16 Gallon Drum •Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac •Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging. •Large Drain - Located to lowest point of drum for emptying of water •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Locking Blowing Wand, Utility Nozzle, Wet Nozzle, Car Nozzle, and Fine Dust Filter Part No. 50343. 16 GALLON STAINLESS STEEL WET/DRY VAC with CART - 1610RV •Top of the line 6.5 Peak Horsepower - High performance wet/dry vacuum provides optimum power •Longer motor life - Durable, long-lasting motor backs industry’s best warranty •Sturdy Cart, Push Handle & Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain and thresholds •Accessory Storage Bag •Cord-Wrap/Large Handle •Stainless Steel Drum Construction - Attractive stainless steel construction provides professional appearance •16 Gallon Drum •Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac •Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large Drain - Located to lowest point of drum for emptying of water •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners. Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Crevice Tool, Car Nozzle, and Find Dust Filter. Part No. 50353. 14 GALLON 2-STAGE WET/DRY VAC with CART RV2400A •11.5 Amp Motor - Drives two blower wheels to optimize suction and deliver industry-leading performance •2-Stage Motor - Creates powerful “high-lift” suction and more efficient air flow. Result – more suction power and quieter operation •Longer motor life - Over 700 hours on average •Sturdy Cart, Push Handle & Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain and thresholds •Accessory Storage Bag •Cord-Wrap/Large Handle •2-Piece Rugged Polypropylene Drum Construction •14 Gallon Drum •Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac •Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 10 ft. hose has a smooth interior surface to reduce clogging •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large Drain - Located to lowest point of drum for emptying of water •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 10 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Floor Brush, Crevice Tool, Muffler/Diffuser, and Fine Dust Filter Part No. 50358. SP04-74 GREGG DISTRIBUTORS LTD. RIDGID® RID/3337 Red Wet/Dry Vacuum Cleaners 16 GALLON 2-STAGE WET/DRY VAC - RV2600B •11.5 Amp Motor - Drives two blower wheels to optimize suction and deliver industry-leading performance. •2-Stage Motor - Creates powerful “high-lift” suction and more efficient air flow. Result – more suction power and quieter operation. •Longer motor life - Over 700 hours on average •Sturdy Cart, Push Handle & Large Non-Marring Wheels - Allows the vac to travel easily up/ down stairs and over rough terrain. •Accessory Storage Bag •Cord-Wrap/Large Handle •2-Piece Rugged Drum Construction •16 Gallon Drum •Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac. •Professional Locking Hose - The hose won’t pull loose during use, and is 4x more durable than our standard hose. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large built-in drain - Drain located to lowest point of drum for emptying of water. Includes: Vacuum, Owner’s Manual, (2) Steel Extension Wands, 1-7/8” x 10 ft. Premium Locking Pro Hose, Floor Tool with 3 inserts (Floor Nozzle, Squeegee, & Carpet Cleaning Nozzle), Multipurpose Nozzle, Crevice Tool, Muffler/Diffuser, and Fine Dust Filter. Part No. 50363. 14 GALLON HEPA-CERTIFIED WET/DRY VAC - RV2400HF •Meets EPA’s definition of a HEPA vacuum under RRP rule for lead paint renovations •The certified HEPA filter is 99.97% efficient at filtering particulates down to 0.3 microns in size •11.5 Amp Motor - Drives two blower wheels to optimize suction and deliver industry-leading performance •2-Stage Motor - Creates powerful “high-lift” suction and more efficient air flow. Result – more suction power and quieter operation. •3 Layers of Filtration - Disposable high-efficiency filter bags collect larger debris. Then a washable fabric filter cover captures particles down to 0.5 microns. The certified HEPA filter then captures the smallest particulates down to 0.3 microns. •Longer motor life - Over 700 hours on average •Sturdy Cart, Push Handle and Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain •Accessory Storage Bag •Cord-Wrap/Large Handle •2-Piece Rugged Drum Construction •14 Gallon Drum •Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac •Professional Locking Hose - The hose won’t pull loose during use, and is 4x more durable than our standard hose •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large built-in drain - Drain located to lowest point of drum for emptying of water Includes: Vacuum, Owner’s Manual, 2 Extension Wands, 1-7/8” x 10 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, 14” Floor Brush, Crevice Tool, Muffler/Diffuser, Filter Bag, Cloth Pre-Filter, Certified HEPA filter,”Beater Bar” turbo brush. Part No. 50368. 16 GALLON MOTOR-ON-BOTTOM WET/DRY VAC 1650RV •Motor on Bottom Design makes accessing filter and emptying drum cleaner and easier •Foot-Activated Switch •6.5 peak Horsepower motor - With nearly 25% more power than previous models •Quick-Access Debris Door - Allows users to dump larger debris into the drum and continue working •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy and secure without tools or fasteners •Longer motor life - Durable, long-lasting motor backs the industry’s best warranty •Sturdy Cart, Push Handle and Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain •Accessory Stretch Caddy - Keeps accessories close by and locked in when emptying •Large Handle •Cord-hook - Keeps the 20 ft. power cord with ALCI outlet neatly stored on-board •2-Piece Rugged Drum Construction •16 Gallon Drum •Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac. Additionally with the motor on the bottom motor noise is hampered. •Professional Locking Hose - The hose won’t pull loose during use, and is 4x more durable than our standard hose •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large built-in drain - Drain located to lowest point of drum for emptying of water Includes: Vacuum, Owner’s Manual, 2 Extension Wands, 1-7/8” x 8’ Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Crevice Tool, Car Nozzle, Noise Muffler/Diffuser, Fine Dust Filter Part No. 50338. 14 GALLON SMART PULSE™ WET/DRY VAC - RV3410 •Self Cleaning Filter - Reduce face loading with the Dual PTFE filters and differential pressure to clean the filter. •11.5 Amp Motor - Drives two blower wheels to optimize suction and deliver industry-leading performance. •2-Stage Motor - Creates powerful “high-lift” suction and more efficient air flow. Result – more suction power and quieter operation. •Longer motor life - Over 700 hours on average. •Sturdy Cart, Push Handle & Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain. •Cord-Wrap/Large Handle •Spin welded Rugged Drum Construction •14 Gallon Drum •Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large built-in drain - Drain located to lowest point of drum for emptying of water. •Premium Locking Pro Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 15 ft. hose has a smooth interior surface to reduce clogging. Includes: Vacuum, Owner’s Manual, 2 PTFE coated filters, 1-7/8” x 15 ft. Locking Hose Part No. 50373. What is Smart Pulse™? The Smart Pulse™ vac is designed with two filters and an integrated sensor. The sensor is continuously monitoring suction efficiency. When a pressure difference inside the vac vs. the outside of the filter is recognized by the sensor, the vac begins an alternating pulsing cycle, back-flushing air through the filter. This process cleans the filter automatically, yet only when needed, providing uninterrupted performance and maximizing efficiency. www.greggdistributors.ca SP04-75 KRYLON KRY/3662 Paint Products SNAP & SPRAY GUN •Offers more durability, comfort, and control when spraying and transforms any spray can into a spray gun •E-Z Pull FullGrip Trigger - eliminates finger fatigue •Up to 8x easier to spray than the leading competition •Improves accuracy and control •Lightweight and easy to use with gloves Part No. K07091000. KIMBERLY-CLARK KIM/1735 Paper/Wiping Products PART NO. DESCRIPTION Bathroom Tissue: 17713 COLOUR SIZE WxL COUNT PER ROLL/PKG. UNITS PER CASE 4.09 x 4.0” 451 60 PLY WASHROOM PRODUCTS KLEENEX® Cottonelle® Standard Roll 32 NORTH White 2 MMM/1173 STABILicers™ — Traction Gear STABILicers™ HEEL Provides superior traction in the critical heel zone, and features a fully integrated tension fit system that secures firmly to boots and shoes. The heel-only design is ideal for driving, and when the job calls for repeated indoor/outdoor transitioning. Lightweight and extremely durable, they’re easy to take on and off, and store easily in a glove box or coat pocket. Adjustable strap allows for one size to fit most applications, and can be shared amongst multiple users and work crews. Replaceable cleats mean affordable, ongoing use - season after season. Part No. 700-00, Heel with Steel Cleats. Part No. 700B-00, Heel with Brass Cleats. GANDER BRAND GAN/2305 TIG (Tungsten Inert Gas) Gloves Heavy duty deer split - with wide cuff and back hand patch on left hand only. Part No. 1525-9, Size 9. Part No. 1525-10, Size 10. Part No. 1525-11, Size 11. Part No. 1525-12, Size 12. MECHANIX WEAR® Professional Gloves MATERIAL4X® FASTFIT® GLOVE •Form-fitting TrekDry® material helps keep hands cool and comfortable •Quick-fit elastic cuff provides a secure fit with easy on/off flexibility •Reinforced thumb and index finger provide added durability •Perforated back-of-hand allows for added ventilation •Seamless Material4X® microfiber abrasion resistance and greater tear resistance than standard synthetic gloves Part No. MF4X-75-008, Small/size 8. Part No. MF4X-75-009, Medium/size 9. Part No. MF4X-75-010, Large/size 10. Part No. MF4X-75-011, X-large/size 11. Part No. MF4X-75-012, 2X-large/size 12. SP04-76 GREGG DISTRIBUTORS LTD. MMM/2724 ERGODYNE® ERG/2094 Squids™ Hard Hat Lanyard ELASTIC HARD HAT LANYARD WITH CLAMP •Comfortably attaches to hard hats and other headwear •Easy release clamp attaches securely to just about anything •Comfortable high stretch elastic material •Hi-Vis lime Part No. 3155. ACCUFORM SIGNS® ACF/1222 Safety Tags 5¾” x 3¼”, Cardstock. Part No. TSS103CTP. 5¾” x 3¼”, Cardstock. Part No. TSS101CTP. 5¾” x 3¼”, Cardstock. Part No. TRS318CTP. 6¼” x 3”, 250 per roll. Part No. TAR125. DANGEROUS GOODS QQQ/2489 Placards NON-REFLECTIVE DECALS - NUMBERED STYRENE PLACARDS Part No. PSN-2-1072, Class 2, 1072, (oxygen, compressed). Part No. PSN-2-1075, Class 2, 1075, (liquefied petroleum gases, petroleum gases, liquefied). Part No. PSN-3-1202, Class 3, 1202, (diesel fuel, fuel oil, gas oil, heating oil light). Part No. PSN-3-1203, Class 3, 1203, (gasoline, motor spirit, petrol). Part No. PSN-3-1230, Class 3, 1230, (methanol). Part No. PSN-3-1267, Class 3, 1267, (petroleum crude oil). Part No. PSN-3-1268, Class 3, 1268, (petroleum distillates, N.O.S., petroleum products, N.O.S. Part No. PSN-3-1863, Class 3, 1863, (fuel, aviation, turbine, engine). Part No. PSN-3-1993, Class 3, 1993, (flammable liquid, N.O.S.). Part No. PSN-3-2924, Class 3, 2924, (flammable liquid, corrosive, N.O.S.). Part No. PSN-3-3494, Class 3, 3494, (sour crude). Part No. PSN-8-1760, Class 8, 1760, (corrosive liquid, N.O.S.). 3494 TARGET TECH TAR/2198 Incandescent Beacons FireBolt® LED BEACONS - SAE J845 CLASS II 3.60”H 5.10”W The Firebolt Class 2 LED model offers (14) selectable flash patterns through Federal Signal’s patented Power Select™ feature. The Power Select allows users to scroll through flash patterns by simply following a sequence of applying power to the unit 3 times in a row which will put the beacon into programming mode. The shatterproof, polycarbonate dome and base includes an o-ring to help protect against moisture •Built-in permanent ½” pipe mount base •FireBolt, 12-24 VDC - Magnetic mount with cigarette plug Part No. 220260-02, Amber. Part No. 220260-03, Blue. www.greggdistributors.ca SP04-77 PRONGHORN PCR/3304 Booster Cables ARCTIC INDUSTRIAL 100% COPPER BOOSTER CABLES •Professional booster cables, with ”no tangle” twin line construction •Packaged in a Hard Case • -50°C Rating Part No. Gauge Length Clamps Clamp Type 25-0091 25-0092 25-0093 25-0094 25-0095 1/0 gauge 1/0 gauge 1/0 gauge 1/0 gauge 1/0 gauge 30 ft. 25 ft. 20 ft. 16 ft. 12 ft. 900 amp 900 amp 900 amp 900 amp 900 amp HD Solid Copper Parrot Clamps HD Solid Copper Parrot Clamps HD Solid Copper Parrot Clamps HD Solid Copper Parrot Clamps HD Solid Copper Parrot Clamps INDUSTRIAL HEAVY DUTY 100% COPPER BOOSTER CABLES •Professional booster cables, with “no tangle” twin line construction •Packaged in a Canvas Bag • -40°C Rating Gauge Length Clamps Clamp Type 2 gauge 2 gauge 2 gauge 4 gauge 4 gauge 4 gauge 4 gauge 4 gauge 6 gauge 8 gauge 25 ft. 20 ft. 16 ft. 20 ft. 20 ft. 16 ft. 16 ft. 12 ft. 12 ft. 12 ft. 500 amp 500 amp 500 amp 500 amp 500 amp 500 amp 500 amp 400 amp 400 amp 200 amp HD Coated Elongated HD Coated Elongated HD Coated Elongated HD Coated Elongated HD Coated Parrot HD Coated Elongated HD Coated Parrot Standard Clamp Standard Clamp Standard Clamp Part No. 25-0201 25-0202 25-0203 25-0401 25-0402 25-0403 25-0404 25-0405 25-0601 25-0801 (may not be exactly as illustrated) QUICK CONNECT INDUSTRIAL HEAVY DUTY 100% COPPER BOOSTER CABLES •Professional booster cables, with ”no tangle” twin line construction •Packaged in a Hard Case •Includes a 5 ft. harness lead and quick connect ends allowing for permanent mounting options • -40°C Rating Part No. Gauge Length Clamps Clamp Type 25-0100 25-0400 1 gauge 4 gauge 30 ft. 20 ft. 800 amp 500 amp HD Epoxy Coated Clamps HD Parrot Clamps COPPER CLAD ALUMINUM (CCA) BOOSTER CABLES •More economical applications where maximum conductivity is not required •“No tangle” twin line construction •Packaged in a canvas bag • -40°C Rating Gauge Length Clamps Clamp Type 4 gauge 6 gauge 8 gauge 10 gauge 16 ft. 12 ft. 10 ft. 10 ft. 400 amp 300 amp 200 amp 150 amp Standard Clamp Standard Clamp Standard Clamp Standard Clamp Part No. 25-0413 25-0611 25-0811 25-0911 (may not be exactly as illustrated) Booster Cable Clamps Part No. 25-5520, 1 pair blister card, 200 amp Standard Clamp. Part No. 25-5545, 1 pair blister card, 400 amp HD Coated Parrot. Part No. 25-5550, 1 pair blister card, 500 amp Super HD Coated Elongated. Part No. 25-5560, 1 pair blister card, 800 amp Super HD Coated Elongated. Part No. 25-5581, 1 pair blister card, 800 amp Super HD Epoxy Coated. Part No. 25-5583, 1 pair blister card, 800 amp Super HD Coated Elongated with Spring Guard. Part No. 25-5555, 1 pair blister card, 500 amp HD Coated Parrot. 25-5545 25-5585 100% black 25-5550 CMYK: C5 M25 Y90 K0 25-5520 CMYK: C45 M35 Y100 K0 PMS: 151C CMYK: C0 M62 Y91 K0 Quick Connectors CONNECTOR KITS •Kits includes 2 solid copper silver plated contacts and housing •Header card •Bagged Gauge Amp Grey Part No. Red Part No. Blue Part No. 2/0350 25-560825-5606 — 1/0175 25-561425-5612 — 2175 25-5618 —25-5616 4175 25-5622 —25-5620 650 —25-5626— 10 - 12 50 —25-5628— SP04-78 GREGG DISTRIBUTORS LTD. 100% black 25-5555 PRONGHORN PCR/3304 Quick Connectors CONNECTOR HOUSINGS CONNECTOR CONTACTS •Header card •Bagged Amp Grey Part No. Red Part No. 350 175 50 25-563225-5630 — 25-563625-5634 25-5638 —25-5640 — •Silver plated solid copper contacts •Sold as pairs •Header card •Bagged Blue Part No. Gauge Amp Part No. 2/0350 25-5652 1/0175 25-5654 2175 25-5656 4175 25-5658 650 25-5660 10 - 12 50 25-5662 100% black PROTECTIVE CAPS •Black PVC Material •Header card •Bagged Part No. 25-5672, 350 amps. Part No. 25-5674, 175 amps. Part No. 25-5676, 50 amps. CMYK: C5 M25 Y90 K0 CMYK: C45 M35 Y100 K0 PMS: 151C CMYK: C0 M62 Y91 K0 FST/2155 FASTER® Flat Face Couplings — High Pressure Features: •Connection by screwing together the two100% parts black• Disconnection by pulling back the female safety sleeve and unscrew •Shut off by flat valve •Connectable with male part under residual pressure (35 MPa - 5075 PSI) without using tools •Disconnection under pressure allowed •Interchangeability according to Faster internal Standards •No spillage during connection and disconnection •Female part equipped with axial rotation adapters •Mating threads heat treated and made to Rd profile • High volume flow and reduced pressure drop is ensured by specially designed components Technical Specifications: 100% black •FEMALE: high grade steel carbonitrited wearing parts. CMYK: C5 M25 Y90 K0 MALE: high grade carbon steel induction hardened. •Polyurethane and NBR Backup ring in PTFE CMYK: C45 M35 Y100 K0 • -25°C to 100°C temperature range •100,000 cycles at max rated working pressure disconnected – 1,000,000 cycles at max. rated working pressure connected Male Female FEMALE NPT Size Dash Inch Thread Size Max. Working PSI FHV-12-34-NPT-MFHV-12-34-NPT-F -12 FHV-16-114-NPT-MFHV-16-114-NPT-F -16 FHV-24-112-NPT-MFHV-24-112-NPT-F -24 3/4” 3/4-14 F. NPT 1” 1¼-11½ F. NPT 1½" 1½-11½ F. NPT 6,650 5,075 5,075 FHV-12-34-SAE-M FHV-12-34-SAE-F -12 FHV-16-1-SAE-MFHV-16-1-SAE-F -16 FHV-24-114-SAE-MFHV-24-114-SAE-F -24 3/4” 1-1/16-12 F. ORB 1" 1-5/16-12 F. ORB 1½" 1-7/8-12 F. ORB 6,650 5,075 5,075 FEMALE ORB (use this logo only when logo is small or printing process dictates) BAF/1305 BAFFIN 2 colour, reversed Pantone 313 30% Screen Pantone 200 of Pantone 313 Pantone 281 (preferred background) Colorado Boot 100% black Part No. (use this logo only when logo is small or printing process dictates) 3 colour Pantone 313 Pantone 200 Pantone 281 0% black 12298 FNLBaffinLogoEN.ai CMYK: C5 M25 Y90 K0 Size REAC-M011-BK1-7 7 REAC-M011-BK1-8 8 REAC-M011-BK1-9 9 REAC-M011-BK1-10 10 REAC-M011-BK1-11 11 REAC-M011-BK1-12 12 REAC-M011-BK1-13 13 REAC-M011-BK1-14 14 •Temperature Rating: -40C/-40F •Liner: Removable, multi-layer inner boot system •Base: Arctic Rubber Shell, EVA midsole, Polar Rubber Outsole •Locking snow collar •Diamond-weave, 900 Denier nylon upper •Multi D-Ring lace fastening CMYK: C45 M35 Y100 K0 AER/1037 EATON AEROQUIP PMS: 151C CMYK: C0 M62 Y91 K0 High Pressure Hose EC210 WINNER® DOUBLE WIRE BRAID HOSE - SAE 100R2AT TYPE S, EN853, 2SN Construction: Synthetic rubber tube, two wire braid100% reinforcement, and black synblack thetic rubber cover MSHA approved. Application: For hydraulic system service with petroleum and water-based fluids for general industrial service. Temperature Range: -40°C to 100°C Part No. EC210-4 EC210-6 EC210-8 EC210-12 EC210-16 EC210-20 EC210-24 EC210-32 Hose I.D. O.D. Max Operating Pressure Min. Burst Pressure Min. Bend Radius Weight bar mm inch psi bar psi mm inch kg/m lb/ft Dash mm inch -46.40.2515.00.59 400 5,800 1,600 23,200100.03.94 0.38 0.26 -69.50.3818.90.74 330 4,800 1,320 19,200130.05.12 0.54 0.36 -8 12.7 0.522.20.87 275 4,0001,100 16,000 180.07.090.640.43 -12 19.0 0.7529.21.15 215 3,125 86012,500240.09.45 0.93 0.62 -16 25.4 1.0037.21.46 165 2,400 6609,600300.011.811.29 0.87 -2031.81.25 47.3 1.86 125 1,800 5007,200420.016.54 1.89 1.27 -2438.11.50 53.7 2.11 90 1,300 3605,200500.019.69 2.10 1.41 -3250.82.00 66.7 2.63 80 1,150 3204,600630.024.80 2.76 1.85 www.greggdistributors.ca SP04-79 23 L OCA TIO NS: ALBERTA EDMONTON - MAIN 16215-118 Ave., T5V 1C7 Ph: 780-4-GREGGS or 447-3447 Fax: 780-451-2528 EDMONTON - EAST 3611 - 76 Ave., T6B 2S8 Ph: 780-450-2233 Fax: 780-450-2266 EDMONTON - SOUTH 3911 - 92 St., T6E 6R8 Ph: 780-409-2000 Fax: 780-409-2100 NISKU 1405 - 5 St., T9E 8C7 Ph: 780-979-9988 Fax: 780-979-9989 ATHABASCA 5006 - 52 St., T9S 1V3 Ph: 780-675-3110 Fax: 780-675-4774 CALGARY - MAIN 5755 - 11 St. S.E., T2H 1M7 Ph: 403-253-6463 Fax: 403-253-5926 CALGARY - FOOTHILLS 6130 - 51 St. S.E., T2C 4M9 Ph: 403-203-1928 Fax: 403-236-1912 CLAIRMONT 9802 - 84 Ave., T0H 0W0 Ph: 780-567-2238 Fax: 780-567-2239 DRAYTON VALLEY 6105 - 50 Ave., Box 5055, T7A 1R3 Ph: 780-621-0056 Fax: 780-621-0057 FAIRVIEW 9402 - 113 St., Box 2020, T0H 1L0 Ph: 780-835-5115 Fax: 780-835-3535 FORT MCMURRAY 325 MacAlpine Crescent, T9H 4Y4 Ph: 780-715-4000 Fax: 780-743-8833 ! n g Soo in Com ACHESON 101-53016 Hwy 60, T7X 5A7 Ph: 780-948-7111 Fax: 780-948-7222 GRANDE PRAIRIE 11140 - 97 Ave., T8V 3J8 Ph: 780-513-4000 Fax: 780-513-6000 HIGH LEVEL 10207 - 96 St., T0H 1Z0 Ph: 780-926-2521 Fax: 780-926-3514 RAINBOW LAKE 2 Rainbow Drive, Box 823, T0H 2Y0 Ph: 780-956-2588 Fax: 780-956-2589 RED DEER 5141 - 76A Street Close, T4P 3M2 Ph: 403-341-3100 Fax: 403-341-3210 SPIRIT RIVER 5202 Highway 49, Box 579, T0H 3G0 Ph: 780-864-3333 Fax: 780-864-3330 STRATHMORE 1020 Westridge Road, T1P 1H8 Ph: 403-934-3710 Fax: 403-934-5453 BRITISH COLUMBIA FORT ST. JOHN 9404 - 111 St., V1J 7J5 Ph: 250-785-8000 Fax: 250-785-8022 LANGLEY 19632 - 96 Ave., V1M 3B9 Ph: 604-888-9588 Fax: 604-888-4688 NANAIMO 1935 Boxwood Rd., V9S 5X9 Ph: 250-754-1935 Fax: 250-754-1165 SASKATCHEWAN SASKATOON 3066 Faithfull Ave., S7K 8H2 Ph: 306-343-6655 Fax: 306-343-6656 www.greggdistributors.ca Items may not be exactly as illustrated. Quantities on some items may be limited. Errors are subject to correction. ©2015 Gregg Distributors Ltd. All rights reserved. pen! O Now LETHBRIDGE 4005 - 5 Ave. N., T1H 6Y3 Ph: 403-328-7333 Fax: 403-328-7666