K26E.pdf 05.10.14
2005-2006 MURATA PRODUCT Selection Guides
2005-2006
MURATA PRODUCT
Selection Guides
MURATA PRODUCT Selection Guides
K26E.pdf 05.10.14
CONTENTS
Capacitors
01
Resistors · Thermistors
05
Coils · Delay Lines
08
Noise Suppression Products · EMI Suppression Filters
11
Resonators
17
Piezoelectric Sound Components
19
AV Components / Modules
19
Communication Components / Modules · Optical Products
20
Functional Modules · Power Spplies · Sensors
21
K26E.pdf 05.10.14
Capacitors
MURATA PRODUCT Selection Guides
No one makes more multilayer ceramic capacitors than
Murata, and no one makes them smaller! We span the field
from chips you can hardly see to high power capacitors you
can hardly lift.
Our chip types are progressively replacing other dielectrics,
especially plastic film and tantalum. Why? Because they are
smaller, more reliable, more versatile and more available.
As a materials house, Murata has the advantage of making
the dielectrics for these capacitors right from the mined
materials up. This gives us an unusually high level of control
and expertise.
Catalog No.
C02E
Chip Monolithic Ceramic Capacitors
C02E
For Flow/Reflow Soldering GRM15/18/21/31 Series
For Reflow Soldering GRM32/43/55 Series
Ultra Small GRM03 Series
Thin Capacitors (Flow/Reflow)
Thin Layer Large Capacitance Type
Low Dissipation
Microchips
Capacitor Arrays
For Ultrasonic Sensors
Low ESL
High Frequency for Flow/Reflow Soldering
High-Q & High Power
High Frequency
Medium Voltage Low Dissipation Factor
Medium Voltage High Capacitance for General-use
Medium Voltage Only for Telecommunication Devices
Medium Voltage Only for Camera Flash Circuit
AC250V (r. m. s.) Type
Safety Standard Recognized Type GC (UL, IEC60384-14 Class X1/Y2)
Safety Standard Recognized Type GD (IEC60384-14 Class Y3)
Safety Standard Recognized Type GF (IEC60384-14 Class Y2, X1/Y2)
Safety Standard Recognized Type GB (IEC60384-14 Class X2)
Chip Monolithic Ceramic Capacitors for Automotive
C03E
C49E
C03E
C80E
Radial Lead Type Monolithic Ceramic Capacitors
C49E
Safety Recognized Ceramic Capacitors
C80E
High Voltage Ceramic Capacitors DC250V-6.3kV
C84E
C84E
C41E
C42E
High Voltage Ceramic Capacitors DC10-40kV
C41E
High Frequency Power Ceramic Capacitors
C42E
Trimmer Capacitors
T13E
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
T13E
01
Capacitors
Selection Guide of Chip Monolithic Ceramic Capacitors
Function
Type
High Capacitance
K26E.pdf 05.10.14
MURATA PRODUCT Selection Guides
Series
GRM (X5R, X7R, Y5V, etc.)
220pF–100µF
Decoupling, Smoothing
Array (2 or 4 Elements)
GNM
10pF–2.2µF
GRM (C0G)
Frequency Control/Tuning,
Impedance Matching
0.1pF–0.1µF
Class1 TC's;
GRM (U2J)
Low Inductance
(Reverse Geometory)
LLL
22000pF–10µF
High Speed Decoupling
Low Inductance
(Multi Termination)
Low ESR (50V to 500V)
High Frequency
Low ESR, Ultra Small
Lowest ESR
Start
LLA/LLM (From 1GHz)
10000pF–4.5µF
ERB (1MHz to 1GHz)
0.5pF–1000pF
GJM (500MHz to 10GHz)
0.1pF–20pF
GQM (500MHz to 10GHz)
0.5pF–100pF
GMA
Optical Communications
Wire-Die-Bonding
Medium Voltage
High Frequency Snubber
250V/630V/1kV/2kV/3.15kV
Low Dissipation
GRM (SL, U2J)
Medium Voltage
LCD Back Lighting Inverters
3.15kV
Low Dissipation
GRM (C0G)
Medium Voltage
Decoupling, Smoothing
250V/630V/1kV
High Capacitance
220pF–1µF
Medium Voltage
Only for Camera Frash Circuit
350V
High Capacitance
10000pF–47000pF
2kV
High Capacitance
100pF–4700pF
Safety Standard
Recognized
Type GD 10pF–4700pF
Type GF 10pF–4700pF
Safety Standard
Recognized
Type GC 100pF–330pF
Type GF 470pF–4700pF
Type GB 10000pF–33000pF
AC250V which meet
Japanese Law
470pF–0.1µF
Medium Voltage
Only for
Telecommunication
Devices
100pF–10000pF
5pF–10000pF
5pF–47pF
GRM
GR7
GR4
AC Lines Noise Removal
High Capacitance
Automotive
(Power-train,
Safety Equipment)
Class1 TC's;
Low Inductance
02
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
GA2
GCM (X7R, X8L, X8G etc.)
0.5µF–10µF
GCM (C0G, CHA etc.)
220pF–10µF
LLC
2200pF–2.2µF
Series
Thin Layer Large- For General Electronics
capacitance
Equipment
UltraGRM03
miniature
For Automotive
GRM15
GRM18
GRM21
GRM31
GRM32
GRM43
GRM55
GRM03
GRM15
GRM18
GRM21
GRM31
GRM32
GRM43
GCM15
GCM18
GCM21
GCM31
LLC18
LLC21
LLC31
Low- GJM03
dissipation GJM15
K26E.pdf 05.10.14
Product Guide / Capacitance Range
Capacitors
Dimensions
(mm)
0.1p
1p
0.6X0.3
0.5pF
1.0X0.5
1.6X0.8
2.0X1.25
3.2X1.6
3.2X2.5
4.5X3.2
5.7X5.0
0.6X0.3
1.0X0.5
1.6X0.8
2.0X1.25
3.2X1.6
3.2X2.5
4.5X3.2
1.0X0.5
1.6X0.8
2.0X1.25
3.2X1.6
0.8X1.6
1.25X2.0
1.6X3.2
0.6X0.3
1.0X0.5
0.5pF
10p
MURATA PRODUCT Selection Guides
Capacitance Range (F)
0.01µ
1000p
100p
1µ
0.1µ
10 µ
100 µ
0.01µ F
0.1µF
1µF
0.5pF
4.7µF
12pF
10µF
1pF
10µF
4.7µF
560pF
1200pF
4.7µF
3300pF
0.015µF
0.22µF
2.2µF
0.15µF
10µF
0.47µF
1µ F
2.2µF
22µF
22µF
47µF
100
µF
100
µF
100
µF
0.1 µF
0.5pF
1.0µF
0.5pF
3.3µF
10µF
100pF
1800pF
0.1µ F
2200pF
0.47µF
4700pF
0.01µF
0.5pF
2.2µF
9.9pF
0.5pF
18pF
Rated Voltage
Medium Voltage
High Frequency Safety Standard
Series
Recognized
10pF
DC1kV
10pF
DC2kV
10pF
2200pF
470pF
220pF
5pF
100pF
1µF
220pF
DC250V
1.6X0.8-5.7X5.0 DC630V
DC1kV
4.5X2.0-4.5X3.2 DC2kV
DC350V
3.2X1.6
4.5X2.0-5.7X5.0 AC250V
0.22µF
1000pF
0.1µF
1000pF
100pF
4700pF
0.01µF
0.047µF
0.1µF
470pF
Class / Rated Voltage
X1,Y2/AC250V
5.7X5.0
GA3 (Type GC)
GA3 (Type GD) 4.5X2.0-4.5X3.2 Y3/AC250V
Y2/AC250V
GA3 (Type GF) 4.5X2.0-5.7X5.0
X1,Y2/AC250V
X2/AC250V
5.7X5.0
GA3 (Type GB)
0.5pF
GQM18
1.6X0.8
0.5pF
GQM21
2.0X1.25
GQM32
3.2X2.5
0.5pF
ERB18
1.6X0.8
0.5pF
ERB21
2.0X1.25
0.5pF
ERB31
3.2X2.5
0.5pF
For
Ultrasonic GRM21
Sensors
Micro GMA05
Chip GMA08
Array
DC630V
DC3.15kV
GRM
(High
Capacitance)
GR4
GR7
AC250V GA2
Low ESL
2.0X1.25-4.5X2.0
0.01µF
100pF
DC250V
GRM
(Low
Dissipation)
GNM1M
GNM21
GNM31
LLA18
LLA21
LLA31
LLL18
LLL21
LLL31
LLM21
LLM31
100pF
4700pF
10pF
330pF
470pF
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
4700pF
0.01µF
0.033µF
100pF
100pF
100pF
100pF
180pF
1000pF
2.0X1.25
0.5X0.5
0.8X0.8
1.37X1.0
2.0X1.25
3.2X1.6
1.6X0.8
2.0X1.25
3.2X1.6
0.8X1.6
1.25X2.0
1.6X3.2
2.0X1.25
3.2X1.6
330pF
10pF
1000pF
1500pF
0.01µF
100pF
0.1µF
330pF
10pF
0.1µF
10pF
0.1µ F
0.15µF
10pF
0.33µF
1.0µF
0.01µF
4.7µF
0.1µF
4.7µF
0.1µ F
2200pF
0.47µF
4700pF
0.01µF
2.2µF
0.01µF
2.2µF
0.1µF
4.7µF
03
Selection Guide of Ceramic Trimmer Capacitors
Capacitors
K26E.pdf 05.10.14
MURATA PRODUCT Selection Guides
Start
Mounting Method
Surface Mount
PCB Insertion
Soldering Method
Insertion Method
Reflow
Flow
Manual Insertion
Automatic Insertion
Height 0.90mm max.
1.5(W) x 1.7(L)
Height 3.2mm max.
4.0(W) x 4.5(L)
Height 3.2mm max.
4.0(W) x 4.5(L)
Height 6.6mm max.
6.0(W) x 6.0(L)
TZR1
Height 1.00mm max.
2.2(W) x 2.7(L)
TZB4_C
TZB4_A
TZ03_T
(with cover film)
Radial Taping Type
TZS2
TZB4_D
Height 1.25mm max.
2.5(W) x 3.2(L)
TZB4_B
TZY2
Height 5.3mm max.
6.0(W) x 6.0(L)
(with cover film)
Height 1.45mm max.
2.3(W) x 3.2(L)
TZ03_F
TZV2
Height 1.7mm max.
3.2(W) x 4.5(L)
TZB4_E
(with cover film)
TZ03_E
TZC3
Height 1.8mm max.
3.2(W) x 4.5(L)
TZ03_N
TZC3
Height 3.2mm max.
4.0(W) x 4.5(L)
TZ03_B
TZB4_A
TZB4_B
TZB4_E
Height 7.7mm max.
7.0(W) x 7.5(L)
High Frequency Power
Height 2.6mm max.
4.2(W) x 5.2(L)
TZ03_Y
TZW4
04
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
K26E.pdf 05.10.14
Resistors · Thermistors
MURATA PRODUCT Selection Guides
Resistive products may not seem compatible with those of
a ceramic technology house like Murata, but PTCs and
NTCs are in the semiconductor range of ceramic products.
High voltage resistors, resistor networks and trimmer
potentiometers utilise materials and processes that Murata
uses extensively on other products.
Murata helped to establish PTCs with fast switching times
and self resetting capabilities making them ideal for circuit
protection. Murata was among the first to develop the NTC
and use the more progressive switching for temperature
compensation, monitoring and control.
Catalog No.
R19E
PTC Thermistors (POSISTORr) for Heaters
R19E
PTC Thermistors (POSISTORr) for Circuit Protection
R90E
R90E
PTC Thermistors (POSISTORr) for Degaussing Circuits
NTC/PTC Thermistors for Automotive
R03E
R03E
R44E
NTC Thermistor Chip Type
NTC Thermistor Resin Coated Radial Lead Type
PTC Thermistor (POSISTORr) Chip Type
PTC Thermistor (POSISTORr) Lead Type
NTC Thermistors
R44E
Temperature Compensation
Temperature Sensing
Inrush Current Suppression
N16E
SIP Resistor Networks
N16E
Trimmer Potentiometers
R50E
High Voltage Resistors
H01E
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
R50E
H01E
05
Resistors · Thermistors
K26E.pdf 05.10.14
Selection Guide of Thermistors
MURATA PRODUCT Selection Guides
Start
Application
Current Control
Heaters
Sensors
Current or Temperature
Current
Temperature
Functions
Functions
Degaussing
Motor Starter
Inrush Current
Heater
Over Current
Protecting
Over Heat
Sensing
Temperature
Compensation
Temperature Sensor
PTD
PTH7M
NTP
PTW
PRG
PRF
NCP
NTS
High Accuracy
PTH8M
06
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
PTG
PTF
NCP
K26E.pdf 05.10.14
Selection Guide of Trimmer Potentiometers
Resistors · Thermistors
MURATA PRODUCT Selection Guides
Start
Mounting Method
Surface Mount
PCB Insertion
Sealed Construction
Construction
Adjustment
Open
Sealed
Top
Resistive Element
Resistive Element
Side
Cermet Resistive Element
Carbon
Cermet
Carbon
Cermet
2mm size Single Turn
2mm size Single Turn
2mm size Single Turn
3mm size Single Turn
6mm size Single Turn
6mm size Single Turn
Low Height
for Automatic Adjustment
(0.9mm max.)
with Rotational Stop
for Automatic Adjustment
with Rotational Stop
with Rotational Stop
with Rotational Stop
PVA2
PVF2
PVG3A
PVC6A/D/M
PVC6E/G/H/Q
7mm size 4 Turns
7mm size 4 Turns
PV12H/P
PV12T/S
6mm size 12 Turns
6mm size 12 Turns
PVG3K
PV37W/Y
PV37P/X/Z
4mm size Single Turn
10mm size 25 Turns
10mm size 25 Turns
PVM4
PV36W/Y
PV36P/X/Z
(0.85mm max.)
PVZ2A_C04
(1.0mm max.)
PVZ2A_C01
Rear Adjustment
Low Profile with Smaller
Foot Print (0.9mm max.)
PVZ2R
3mm size Single Turn
for Automatic Adjustment
with Rotational Stop
PVS3
PVG3G
Rear Adjustment
with Rotational Stop
Rear Adjustment
PVZ2K
with Rotational Stop
PVA3
3mm size Single Turn
for Automatic Adjustment
PVZ3A
Rear Adjustment
PVZ3K
5mm size 11 Turns
19mm size 15 Turns
PVG5
PV23P/Y
Rear Adjustment
Low Profile (1.5mm max.)
PVZ3R
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
07
K26E.pdf 05.10.14
Coils · Delay Lines
MURATA PRODUCT Selection Guides
Today's miniature and complex equipment demands smaller
components that perform well at the lower frequencies
already in use, but also at GHz levels.
Since Joseph Henry established the Henry as the unit of
inductance, the coil has come a long way, mostly in the last
20 years and much of it in Murata laboratories.
The delay line is a relative newcomer. However, Murata chip
coils and delay lines do work well at high frequencies. This
results from the monolithic and thin-film technologies,
materials and processes Murata has developed for these
components.
Catalog No.
O05E
Chip Coils
O05E
Chip Multilayer Delay Lines
N91E
N91E
Antenna Coils
08
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
K26E.pdf 05.10.14
Selection Guide of Chip Coils
Coils · Delay Lines
MURATA PRODUCT Selection Guides
Start
Operating Frequency
Greater than 100MHz
Less than 100MHz
Application
Choke
General
High Frequency
Wire Wound
Multilayer
Wire Wound
Multilayer
Wire Wound
Film
Multilayer
1206
0603
1206
0603
03015
0201
0402
LQH31C
LQM18F
LQH31M
LQM18N
LQW04A
LQP03T
LQG15H
0.12–100µH 80–970mA
1.0–10µH
0.15–100µH
47–2200nH
1.1–22nH
0.6–56nH
1.0–270nH
1210
0805
1210
0805
0402
0402
0603
LQH32C
LQM21D
LQH32M
LQM21N
LQW15A
LQP15T
LQG18H
(Standard type)
1.0–47µH 7–60mA
1.0–560µH
0.1–4.7µH
1.3–120nH
1.0–18nH
1.2–100nH
0805
1812
0603
0402
LQM21F
LQH43M(N)
LQW18A
LQP15M
1.0–47µH 7–220mA
1.0–2200µH
2.2–470nH
1.0–33nH
1206
0805
0603
LQM31F
LQW2BH
LQP18M
10µH 70mA
2.7–470nH
1.3–100nH
0.15–560µH 60–1450mA
Dimensions in inches
1210
LQH32C_53
(Low profile type)
1.0–100µH 100–1000mA
1812
LQH43C
1206
1.0–470µH 90–1080mA
2220
DC-DC Converter
LQW31H
8.8–100nH
LQH55D
0.12–10000µH 0.05–6.0A
Wire Wound
2525
0806
1206
LQH31H
54–880nH
LQH66S
0.27–10000µH 0.05–6.0A
LQH2MC
1.0–82µH
1212
LQY33P
2.2–10µH
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
09
K26E.pdf 05.10.14
Product Guide / Inductance Range
Coils · Delay Lines
MURATA PRODUCT Selection Guides
Murata's LQp series of chip coils consists of compact, high-performance inductors. Their innovative coil and case structures
mean low DC resistance and outstanding high-frequency characteristics. The series is designed for a variety of applications,
facilitating component selection for individual circuit requirements.
Dimensions
Application
Part Number
Structure
(mm)
EIA Code
0.5
0402
0.8
0603
0.3
0201
0.5
0402
Multilayer
LQP03T
0.6
LQP15T
1.0
Tight Inductance
Tolerance
LQW18A
LQH31H
Magnetically Shielded
Multilayer
LQM21N
0.5
0402
0.8
0603
2.2nH
470nH
1.5
0805
2.7nH
470nH
1.6
1206
3.2
1206
1.6
0.8
0603
1.25
0805
2.0
1206
3.2
2.5
4.5
LQH43M(N)
3.2
2.0
LQH2MC
DC-DC Converter Type
1.6
120nH
8.8nH
100nH
54nH
880nH
47nH
2200nH
0.1µH
4.7µH
100µH
0.15µH
1210
1.0µH
1812
1.0µH
0806
1.0µH
3.2
2200µH
82µH
1.6
LQM21F
0805
1.0µH
47µH
1.25
0805
1.0µH
47µH
1.6
1206
2.0
3.2
LQH31C
LQH32C
1.25
3.2
LQM31F
1206
1.6
Wire Wound
3.2
1210
2.5
4.5
LQH43C
10µH
100µH
0.12µH
560µH
0.15µH
1.0µH
1812
3.2
5.7
LQH55D
Wire Wound
5.0
LQH66S
Magnetically Shielded
6.3
2220
0.12µH
6.3
2525
CAUTION : Use rosin-based flux, but not strong acidic flux (with chlorine content exceeding 0.2wt%) when soldering chip coil.
Do not use water-soluble flux.
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
10µH
1.0µH
2.0
Magnetically Shielded
Multilayer
10µH
0603
0.8
LQM21D
2.2µH
1212
3.2
LQM18F
10
560µH
Wire Wound
LQY33P
Chokes
22nH
1.3nH
1.6
Wire Wound
(ferrite core)
100nH
1.1nH
3.2
LQH31M
LQH32M
03015
1.6
LQM18N
General Frequency Range
0.4
33nH
1.3nH
1.6
Wire Wound
(ferrite core)
18nH
0603
3.2
LQW31H
56nH
0.8
2.0
LQW2BH
100nH
0402
1.0
Wire Wound
(air core)
10m
270nH
0.5
0.8
LQW15A
1m
1.0nH
1.6
LQW04A
100µ
1.0nH
1.0
LQP18M
10µ
0.6nH
Film
LQP15M
1µ
100n
1.2nH
1.6
LQG18H
10n
1.0nH
1.0
LQG15H
High Frequency Range
Inductance Range (H)
1n
0.27µH
470µH
10000µH
10000µH
K26E.pdf 05.10.14
Noise Suppression Products · EMI Suppression Filters
MURATA PRODUCT Selection Guides
With wide anechoic test capabilities, Murata knows about
EMI, and our vast range of EMI filters almost guarantees
that, with Murata, you will solve your problems.
As well as comprehensive catalogs, full of application
information and component data, we offer publications on
subjects like measuring methods, legislation compliance
and noise suppression.
Our free EMI filter simulation software is available on our
web-site (www.murata.com/) or on our free CD-ROM
catalog. It enables you to select the best filters by circuit
type and a range of other conditions.
Catalog No.
C31E
On-board Type (DC) EMI Suppression Filters (EMIFILr)
C31E
On-board Type (DC) EMI Suppression Filters (EMIFILr) for Automotive
C50E
C50E
C09E
EMI Suppression Filters (EMIFILr) for AC Power Line
C09E
O63E
Ferrite Cores for Noise Suppression
O63E
Microwave Absorber
C31E
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
11
Noise Suppression Products
· EMI Suppression Filters
K26E.pdf 05.10.14
Selection Guide of EMI Filters
MURATA PRODUCT Selection Guides
Chip Ferrite Beads
Start
Type Signal Line
DC Power Line
General Signal Line
High Speed Signal Line
General
High Frequency
General
High Frequency
General
High Frequency
0402
0402
0201
0402
0201
0402
BLM15P
BLM15EG
BLM03A
BLM15HG/EG
BLM03B
BLM15HD/HB
1A
0.7–1.5A
10–600Ω
120–1000Ω
10–120Ω
120–1800Ω
0603
0603
0402
0603
0402
0603
BLM18P
BLM18EG
BLM15A
BLM18HG/HK/EG
BLM15B
BLM18HD/HB
0.5–3A
0.5–2A
10–1000Ω
100–1000Ω
5–1800Ω
0805
0603
0603
0603
BLM21P
BLM18A/T/R
BLM18GG
BLM18B
1.5–6A
120–1000Ω
470Ω
5–2500Ω
1206
0805
0805
BLM31P
BLM21A/R
BLM21B
1.5–6A
120–1000Ω
5–2700Ω
1806
Arrays
Arrays
0804
0804
120–1800Ω
Dimensions in inches
BLM41P
1–6A
BLA2AA
BLA2AB
Low DC Resistance Type
120–1000Ω
10–1000Ω
0603
1206
1206
BLM18S
BLA31A
BLA31B
1.5–6A
30–1000Ω
120–1000Ω
Impedance is typical value at 100MHz.
12
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
Noise Suppression Products
· EMI Suppression Filters
Chip EMIFILr
MURATA PRODUCT Selection Guides
Chip Common Mode Choke Coils
Start
Start
Type Signal Line
Type Signal Line
General Signal Line
High Speed
Signal Line
Capacitor Type
Capacitor Type
LC Combined T-type
0603
0603
DC Power Line
K26E.pdf 05.10.14
Selection Guide of EMI Filters
DC Power Line
High Speed Differential
Transmission Line
Audio Line
0603
2020/2014
03025
0504
NFM18P
NFM18C
NFL18ST
DLW5BS(AH)
DLP0NS
DLM11G
2A
22–22000pF
200–500MHz
67–120Ω
600Ω
0805
0805
LC Combined π-type
0.2–5A
190–4000Ω
0504
1008
DLP11S
DLM2HG
0603
NFM21P
NFM21C
2–4A
22–22000pF
1806
1205
2020
NFL18SP
DLW5BT
67–330Ω
150–500MHz
1.5–6A
100–1400Ω
0805
600Ω
Dimensions in inches
0805
NFM41P
NFM3DC
2–6A
22–22000pF
2220
Capacitor Array Type
10–500MHz
1206
1206
DLW21S
NFL21S
NFM55P
6A
NFW31S
LC Combined T-type
22–22000pF
10–500MHz
1206
LC Combined T-type
RC Combined Type
1206
0805
NFR21G
NFE31P
22–2200pF
22–100Ω
10–100pF
2706
RC Combined Array Type
1206
NFE61P
2A
67–180Ω
1206
DLP31S
120–550Ω
NFE31P
2706
0805
DLW21H
NFA31C
6A
67–370Ω
NFE61P
33–4700pF
1206
DLW31S
90–2200Ω
Arrays
NFA31G
0804
6.8–100Ω
10–100pF
LC Combined Array Type
0805
DLP2AD
67–280Ω
1206
NFA21S
80–330MHz
DLP31D
Dimensions in inches
90–440Ω
Impedance is typical value at 100MHz.
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
13
Noise Suppression Products
· EMI Suppression Filters
Product Guide / Effective Frequency Range
K26E.pdf 05.10.14
MURATA PRODUCT Selection Guides
Product Guide
Type
Inductor
Type
For Digital
Interfaces
Standard
For High
Speed Signals
For High
Current
Series
Dimensions
(mm)
EIA Code
BLM18R
1.6
0.8
0603
BLM21R
2.0
1.25
0805
BLM03A
0.6
0.3
0201
BLM15A
1.0
0.5
0402
BLM18A
1.6
0.8
0603
BLM18T
1.6
0.8
0603
BLM21A
2.0
1.25
0805
BLA2AA
(4 circuits array)
2.0
1.0
0804
BLA31A
(4 circuits array)
3.2
1.6
1206
0.3
0201
0.5
0402
0.8
0603
1.25
0805
1.0
0804
1.6
1206
0.5
0402
0.8
0603
1.25
0805
1.6
1206
1.6
1806
0.8
0603
BLM03B
0.6
BLM15B
1.0
BLM18B
1.6
BLM21B
2.0
BLA2AB
(4 circuits array)
2.0
BLA31B
(4 circuits array)
3.2
BLM15P
1.0
BLM18P
1.6
BLM21P
BLM31P
BLM41P
BLM18S
(Low DC Resistance Type)
2.0
3.2
4.5
1.6
Effective Frequency Range
10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz
Continued on the following page.
14
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
Noise Suppression Products
· EMI Suppression Filters
Product Guide / Effective Frequency Range
K26E.pdf 05.10.14
MURATA PRODUCT Selection Guides
Continued from the preceding page.
Type
Inductor
Type
For GHz
Range
Noise
Suppression
Series
Dimensions
(mm)
EIA Code
BLM15HG
1.0
0.5
0402
BLM15HB
1.0
0.5
0402
BLM15HD
1.0
0.5
0402
BLM15EG
1.0
0.5
0402
BLM18HG
1.6
0.8
0603
BLM18HB
1.6
0.8
0603
BLM18HD
1.6
0.8
0603
0.8
0603
0.8
0603
0.8
0603
1.6
BLM18HK
Capacitor
Type
Standard
Type
BLM18EG
1.6
BLM18GG
1.6
NFM18C
1.6
NFM21C
2.0
NFM3DC
3.2
NFM41C
For Signal
Lines
For High
Current
3.2
NFL18ST
1.6
NFL18SP
1.6
NFL21S
2.0
NFA21S
(4 circuits array)
2.0
1.25
0805
1.25
1205
1.6
1806
1.6
1206
0.8
0603
0.8
0603
1.25
0805
1.25
0805
1.6
1206
1.25
0805
1.6
1206
0.8
0603
1.25
0805
1.25
1205
1.6
1806
3.2
NFR21G
2.0
NFA31G
(4 circuits array)
3.2
NFM18P
1.6
NFM21P
2.0
NFM3DP
3.2
NFM41P
0603
4.5
NFA31C
(4 circuits array)
NFW31S
0.8
4.5
Effective Frequency Range
10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz
5.7
NFM55P
T Filter for
High Current
NFE31P
NFE61P(H)
5.0
3.2
2220
1.6
1206
1.6
2706
6.8
Continued on the following page.
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
15
Noise Suppression Products
· EMI Suppression Filters
Product Guide / Effective Frequency Range
K26E.pdf 05.10.14
MURATA PRODUCT Selection Guides
Continued from the preceding page.
Type
Common Mode
Choke Coils
Series
DLP0NS
DLP11S
DLP31S
DLP2AD
DLP31D
DLM11G
DLM2HG
DLW21S
DLW21H
DLW31S
DLW5BS
(DLW5AH)
Dimensions
(mm)
0.8
EIA Code
0.6
03025
1.0
0504
1.6
1206
1.25
3.2
2.0
1.0
3.2
0804
1.6
1206
1.0
0504
2.0
1008
1.2
0805
1.2
0805
1.6
1206
1.25
2.5
2.0
2.0
3.2
5.0
5.0
(3.6)
2020
(2014)
5.0
DLW5BT
Disc EMIFILr
BL01/02/03
DSN6/9(H)
DSS6/9(H)
DST9(H)
EMIGUARDr
(EMI Filters with varistor functions)
VFR3V
VFS6V/9V
Block EMIFILr
BNX002/003/005
BNX012/016
Common Mode Choke Coils
PLT09H
Microwave Absorbers
EA10/20/21/30
16
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
5.0
2020
Effective Frequency Range
10kHz 100kHz 1MHz 10MHz100MHz 1GHz 10GHz
K26E.pdf 05.10.14
Resonators
MURATA PRODUCT Selection Guides
Murata leads the world in Ceramic and SAW Resonator
technologies. These derive from the ceramic family of
materials that is the basis of most Murata components.
Murata's strength, in what appears to be a range of
different technologies, stems from the same fundamental
material. Murata has worked with ceramic technology
material since the early 1940's.
The materials for this product range are developed in
Murata laboratories, made in our own plants and supplied
to our own component makers.
Catalog No.
P16E
Ceramic Resonators (CERALOCKr)
P16E
SAW Resonators
P36E
P36E
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
17
K26E.pdf 05.10.14
Selection Guide of CERALOCKr
Resonators
MURATA PRODUCT Selection Guides
Start
Applications
Full Speed USB
(high-precision)
Consumer
Automotive
Functions
Functions
Card
(small, low-profile)
Automotive
Network
(high-precision)
General Usage
Frequencies
Other
Automotive Usage
MHz
kHz
SMD
SMD
SMD
Leaded
CSTCR_G15ppp
CSTCE_G
CSBFB_J
CSBLA_E
6.00MHz
8.00–13.99MHz
430–519kHz
375–429kHz
SMD
Leaded
SMD
SMD
CSTCC_G
CSTLS_G
CSTCC_G_A
CSTCR_G15Bpp
2.00–3.99MHz
3.40–10.00MHz
2.00–3.99MHz
4.00–7.99MHz
CSTCE_G15ppp
CSTCE_V
CSBFB_J
CSBLA_E
CSTCR_G
CSTLS_X
CSTCR_G_B
CSTCE_G15App
12.00MHz
14.00–20.00MHz
700–1250kHz
430–509kHz
4.00–7.99MHz
16.00–70.00MHz
4.00–7.99MHz
8.00–12.50MHz
CSALS_X
CSTCE_G_A
CSTCE_V13Cpp
8.00–13.99MHz
14.00–20.00MHz
CSTCW_X11ppp
CSTCG_V
CSBLA_E
CSTCE_G
24.00/48.00MHz
20.00–33.86MHz
510–699kHz
8.00–13.99MHz
CSACW_X_E
25.00–70.00MHz
(Two Terminals)
16.00–70.00MHz
(Two Terminals)
CSBLA_J
CSTCE_V
CSTCE_V_C
700–1250kHz
14.00–20.00MHz
14.00–20.00MHz
The kHz resonators have
only two terminals.
CSTCW_X
CSTCV_X_Q
20.01–70.00MHz
20.01–70.00MHz
CSACW_X
CSACV_X_Q
20.01–70.00MHz
(Two Terminals)
20.01–70.00MHz
(Two Terminals)
p: Alphanumerics express individual specification
18
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
K26E.pdf 05.10.14
Piezoelectric Sound Components
MURATA PRODUCT Selection Guides
Catalog No.
Piezoelectric Sound Components
Murata makes a diverse and comprehensive range of
piezoelectric sound components, offering high output
levels from extremely small spaces by way of original
materials, designs and processes. Advanced acoustic
structures and enclosures optimize the effect of the
piezo output.
P37E
P37E
Like most other Murata products, the essential elements
are based on our core material of ceramic, enhanced by
studies of the technologies involved in applying
elements to applications. In this case, optimizing the
sound levels and quality achieved when putting
elements into enclosures.
AV Components / Modules
MURATA PRODUCT Selection Guides
Catalog No.
CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment P50E
SAW Filters for TV/VCR
BGS Filters
CERAFILr are Murata ceramic filters, state-of-the-art
materials, designs and performance in convenient
formats for AM, FM and TV/VCR reception. You can use
these products with confidence because we supply a
significant amount of the world's TV and video tuners.
We know what is needed for these applications.
P50E
Furthermore, we are in volume automated production,
and understand the need for assembly to be automated.
Not all parts are right for auto-handling, and some of the
AM filters are only available in bulk, however the majority
can be processed by machine.
Products for Video Equipment
Tuners (for Terrestrial/CATV)
CRT Peripheral Components
High Voltage Resistors
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
19
Communication Components / Modules · Optical Products
K26E.pdf 05.10.14
MURATA PRODUCT Selection Guides
Catalog No.
Filters for Mobile Communications
Microwave Filters (GIGAFILr)
O81E
Chip Multilayer LC Filters
Chip Multilayer Diplexers
SAW Filters
Ceramic Filters (CERAFILr)
/Ceramic Discriminators for Mobile Communication
P05E
Catalog No.
Microwave Components
Isolators
Chip Multilayer Hybrid Couplers/Baluns
Chip Multilayer Antennas
Chip Dielectric Antennas
Dielectric Resonators (RESOMICSr)
O95E
High Frequency Coaxial Connectors
O30E
Thin Film Metalized Substrate
M04E
Microwave Modules
RF Diode Switches
Voltage Controlled Oscillators (VCOs)
PLL Modules
RF Submodule
Optical Products
Optical Transceiver
Transparent Ceramics (LUMICERAt)
20
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
Functional Modules · Power Spplies · Sensors
K26E.pdf 05.10.14
MURATA PRODUCT Selection Guides
Functional Modules/Hybrid IC
Modules for Communication Equipment
Modules for OA Equipment
Modules for Video Equipment
Power Supplies
Switching Power Supplies
High Voltage Power Supplies
DC-DC Converters
Catalog No.
Sensors
PTC Thermistors for Overheat Sensing
NTC Thermistors for Temperature Sensing
Pyroelectric Infrared Sensors
Piezoelectric Ceramic Sensors (PIEZOTITEr)
R90E
R44E
S21E
P19E
Molded Underwater Transducer/Ultrasonic Sensor/Shock Sensor/
Knocking Sensor Elements/Electric Potential Sensor
Piezoelectric Vibrating Gyroscopes (GYROSTARr)
Non-contact Potentiometers
Rotary Position Sensors
Rotary Sensors
Magnetic Pattern Recognition Sensors
S42E
S30E
R50E
S35E
S31E
Catalog No.
DRY PHANTOM
M05E
DRY PHANTOM is a full-scale model of the human body designed to
have the same electrical response characteristics as the human
body.
For more information, please ask for catalog shown above or visit our website.
http://www.murata.com/
http://search.murata.co.jp/
21
K26E.pdf 05.10.14
Note:
1. Export Control
For customers outside Japan
Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive
weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.
For customers in Japan
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use
in applications other than those specified in this catalog.
q Aircraft equipment
w Aerospace equipment
e Undersea equipment
r Power plant equipment
t Medical equipment
y Transportation equipment (vehicles, trains, ships, etc.)
u Traffic signal equipment
i Disaster prevention / crime prevention equipment
o Data-processing equipment
!0 Application of similar complexity and/or reliability requirements to the applications listed in the above
3. Product specifications in this catalog are as of October 2005. They are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or
product engineers.
4. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering. Especially, please read rating and
CAUTION (for storage, operating, rating, soldering,
mounting and handling) in them to prevent smoking and/or burning, etc.
5. You are able to read a detailed specification in the website of Search Engine (http://search.murata.co.jp/) or catalog library (http://www.murata.com/catalog/)
before to require our product specification or to transact the approval sheet for product specification.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
<
<
>
>
http://www.murata.com/
Head Office
1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan
Phone: 81-75-951-9111
Cat. No. K26E-6
International Division
3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp