technetics.com
Full screen
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
A coming together of the world’s
top-performing businesses…
Technetics Group is the combination of eight
of the world’s best-known sealing and critical
component design and manufacture businesses:
Helicoflex, Garlock France, Tara Technologies,
Technetics, Wide Range Elastomers, Plastomer
Technologies, Hydrodyne and Fabrico.
Technetics Group brings together brand
names that are used throughout the world in
critical markets: HELICOFLEX® resilient metal
seals, BELFAB® edge-welded metal bellows,
FELTMETALTM abradable seals and acoustic
media, BIO-GUARDIAN® elastomer seals and
ORIGRAF® graphite seals.
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Leicester
Hatfield
Charlton
San Carlos
Greenville
Neuss
Oxford
Columbia
St-Etienne / Montbrison
Pierrelatte
Shanghai
Daytona
Houston
DeLand
Singapore
Tokyo
R&D
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
Technetics Group Overview
Locations: 13 global manufacturing locations
Employees: Over 1000 employees worldwide
More than 115 engineers and technical sales persons
1 R&D center and 9 Laboratories
MARKETS
PRODUCTS
SERVICES
R&D
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
Certifications
•ISO 9000
•AS 9100
•Title 10 CFR 50 Appendix B
•ANSI / ASME N45.2
•ANSI / ASME NQA-1
•Favorable Audits by NUPIC Members
•KTA 1401
•MASE
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
Sealing Products
ENPRO INDUSTRIES
MARKETS
Engineered Products
PRODUCTS
SERVICES
R&D
Engine Products & Services
Revenue: $ 1.2 B (2015) / 6,200 employees / 37 primary manufacturing locations
Amounts shown include the deconsolidated operations of Garlock Sealing Technologies LLC and its subsidiaries
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
Sealing Products
Engineered Products
Engine Products & Services
Revenue: $ 1.2 B (2015) / 6,200 employees / 37 primary manufacturing locations
Amounts shown include the deconsolidated operations of Garlock Sealing Technologies LLC and its subsidiaries
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Aerospace
Nuclear
Industrial
Industrial Turbines
Life Sciences
Valves
Semiconductor
Oil & Gas
R&D
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
Aerospace
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
Hydrodynamic Seals
Burst Discs
Acoustic Media
Abradable Seals
Brush Seals
Metal Seals
Bellows Assemblies
Accumulators and
Reservoirs
Carbon Face Seals
PTFE Tapes & Films
PTFE & PEEK Shapes
and Components
We understand the hassles
caused by an aircraft on ground
At Technetics Group, we strive to develop the most efficient and durable
engineered seals, components and subsystems in the aerospace industry. From
deep inside the high-pressure compressors of a jet engine to the seals around
aircraft windows, Technetics Group is there to ensure your aircraft remains in
the air where it belongs.
Elastomer Seals
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
Nuclear
ENPRO INDUSTRIES
MARKETS
PRODUCTS
O-Rings
C-Rings
E-Rings
Graphite Seals
Spiral Wound Gaskets
Inflatable Seals
Quick Disconnect
Systems
In the nuclear power industry,
there’s no such thing as “off the shelf”
to your precise specifications. Our engineers work with you, adhering to your
component designs with peerless attention to detail.
R&D
Metal Seals
Elastomer Seals
At Technetics Group, our seals, components and subsystems are custom-engineered
SERVICES
Metal Bellows
PEEK Shapes
and Components
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
Industrial
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Metal Seals
Graphite Seals
Spiral Wound Gaskets
Metal Bellows
Elastomer Seals
Moulded Seals
Pressure Vessels
Quick Disconnect
Systems
Mechanical Seals
PREST On-Site
Services
Inflatable Seals
Sealing solutions that reduce equipment
downtime and improve safety
In addition to reducing the cost of ownership and increasing safety for end users,
Technetics Group solutions improve performance for a wide variety of OEM
products, including pumps, compressors, glove boxes, sterilizers and more. Our
precision engineered sealing and material solutions lead the market in industrial
quality, reliability and safety.
R&D
Polymer Technologies
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
Industrial Turbines
MARKETS
PRODUCTS
Abradable Seals
Brush Seals
Combustion
Components
Fuel Nozzle
Components
Hot Gas Path
Components
Crossfire-Spring
Retainer
Metal Seals
C-Rings
E-Rings
O-Rings
Acoustic Media
On-demand seals, components and
subsystems for on-demand power generation
Technetics Group offers durable, high-performance and precisely engineered
sealing solutions and system components for a wide range of industrial turbine
applications. In addition, we provide complete metal fabrication and machining
services, including forming, welding (semi-automatic and robotic), treating and
finishing, for both common and exotic alloys (INCONEL®, HASTELLOY®, etc.). SERVICES
R&D
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
Life Sciences
Customized engineered solutions for the
world’s most demanding life Sciences
applications
Pharmaceutical: In the clean-room environment, seal integrity is vital. Technetics
Group’s expertise offers you engineered solutions to help you enhance your safety
and process efficiency.
Medical: Technetics Group is your trusted partner in provided innovative sealing and
component technologies for critical medical applications.
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Metal Bellows
Metal Seals
Pressure Vessels
Inflatable Seals
Moulded Seals
Profiles
PTFE Gaskets
PEEK Machined
Components
PTFE Tapes & Films
Advanced Textures
R&D
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
Valves
Engineered seals, components and
subsystems that are reliable under
pressure
Technetics Group offers innovative solutions for the design and production of ball
valves, butterfly valves, relief valves, globe valves and gate valves. Whether your
valves are being used in the oil & gas industry, power generation, steam production,
industrial services or the nuclear industry, Technetics Group has the application
engineering expertise to design custom-designed solutions for your products.
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
Metal Seals
Graphite Seals
Spiral Wound Gaskets
Polymer
Machined Components
Metal Bellows
Elastomer Profiles
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
Semiconductor
Precisely engineered components
for a precise market
The semiconductors behind today’s technology are rapidly evolving. To be at
the forefront of this industry, you need partners that are responsive to your
innovations, provide on-time delivery, offer prices that will keep you profitable
and are innovative themselves. Technetics Group is the partner that meets those
criteria.
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
Metal Bellows
Advanced Textures
Machined
Plastic Components
PTFE Components
Electrostatic
Chuck Pedestals
Metal Pedestals/
Heater Assemblies
Advanced Assemblies
Plastic Fabrication
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
Oil & Gas
ENPRO INDUSTRIES
MARKETS
Metal Bellows
your partner for custom-designed solutions in the oil & gas industry. From precision
down-hole components to polymers to the production of our BELFAB® bellows
assemblies, we tailor our products to your exact specifications.
SERVICES
R&D
Accumulators
Metal Seals
Machined Seals
Mechanical Seals
PTFE & PEEK Shapes
and Components
Machined
Plastic Components
Spiral Wound Gaskets
Graphite Seals
Engineered solutions
in the oil & gas industry
Whether you’re exploring, producing, transporting or refining, Technetics Group is
PRODUCTS
Inflatable Seals
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Metal Seals
Polymer Technologies
HELICOFLEX®, C-FLEX™, O-FLEX™, E-FLEX™
Plastic Shapes, Machining, Injection Molding,
Fabrication and Tapes
Elastomer Seals
Profiles, Moulded and Spliced Parts
Assemblies and Electrostatic Chuck
(ESC) Pedestals
Inflatable Seals
Spiral Wound gasket
CEFIL’AIR®, BIO-GUARDIAN®
Graphite Seals
ORIGRAF , FARGRAF , CEFIGRAF
®
®
Pressure Vessel and Subsystem Chamber Assemblies
VITAFLEX®
®
Burst Discs
SAFE-SHEAR®
Mechanical Seals
Acoustic Media and Abradable Seals
Sealing Systems
Brush Seals
Machined and Edge-Welded Metal Bellows
Turbine Components
GPA®, GULLIVER®, Carbon Face Seals
QDS, KENOL , Bolted Flanges, Tri-Clamps
®
BELFAB® Machined and Edge-Welded Metal Bellows
Hydrodynamic Seals
R&D
Hydrodynamic “Lift-Off” Seals for Critical Aerospace
Applications
FELTMETAL™
Metallic Brush Seals, HELICOCARBTM
Fuel Nozzle Components, Combustion Components,
Hot Gas Path Components
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
Metal Seals
SERVICES
R&D
Back to Markets
HELICOFLEX ®, C-FLEXTM, O-FLEXTM, E-FLEXTM
Main features
•Useful elastic recovery up to 0.5 mm
•Corrosion resistance to all media (acids and bases)
•Pressure: from ultra high vacuum to 2500 bar
•Temperature from -273°C to 800°C (-460°F to 1472°F)
•Lifetime: above 100 years
•Leak tightness 10-11 Pa.m3/s Helium
•Range of materials (aluminium, silver, copper, stainless steel, INCONEL® and other exotic metals, ...)
•Design can be adapted to any type of assembly
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Elastomer Seals
R&D
Back to Markets
Profiles, Moulded and Spliced Parts
Main features
Moulded, Profiles
•Large material selection: BIO-GUARDIAN®, SILICONE, EPDM, FKM, HNBR all known for resistance to temperature from -100°C to +300°C (212°F to 572 °F), high chemical inertia and compatibility with food and pharmaceutical applications (FDA, USP6,…)
•Elastomer with antibacterial properties
•Flexible design and custom applications
•Adaptation to environment and service conditions
•Large range of operating conditions: from few mbar to 100+ bar / variousfluids
Plate seals
•Elastomeric seals over molded in grooves of anodized or nickel plated aluminum
retainers allowing perfect positioning between elements to seal, regardless of
accessibility and joint orientation
•Specific design features of FKM, SILICONE and FLUORO-SILICONE seal materials
contribute to safe static sealing of aircraft fuel systems
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
Inflatable Seals
PRODUCTS
SERVICES
R&D
Back to Markets
CEFIL’AIR ®, BIO-GUARDIAN ®
Main features
•Expanded and retracted by the effect of fluids (pneumatic or hydraulic)
•No seal stress during opening and closing phases
•Large material selection: SILICONE, SBR, EPDM, FKM, HNBR, which offer highly resistant mechanical and physical properties to ensure a long lifetime and numerous operating
cycles. Pressure: from 10-3mm Hg to 12 bar, temperature from -50°C to +360°C
( -148°F to 482°F)
•Highly flexible design: available in a large selection of shapes and sizes, CEFIL’AIR®
seals are designed to fulfill the requirements of a variety of applications - aerospace,
high temperature, food / pharma industries
•BIO-GUARDIAN® elastomers prevent the development of bacteria and biofilm formation
•Large range of operating conditions: In addition to their sealing applications, CEFIL’AIR® seals can be used for moving, handling, holding or clamping, particularly large, fragile or
complex objects
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Graphite Seals
R&D
Back to Markets
ORIGRAF ®, FARGRAF ®, CEFIGRAF ®
Main features
•Elastic recovery up to 50% of the compression
•Low creep and relaxation
•Temperature from -196°C up to 2500°C (-321°F to 4532°F) (inert atmosphere)
•Pressure up to 400 bar
•Good resistance to radiation (nuclear application)
•Chemical resistance
•Ability to withstand differential radial motion
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
Mechanical Seals
PRODUCTS
SERVICES
R&D
Back to Markets
GPA®, GULLIVER ®, Carbon Face Seals
Main features
•GPA®: 15 bar, rotating speed up to 15 m/s
•GULLIVER®: up to 80 bar with GM KLOZURE, -40°C to 200°C (-104°F to 392°F),
rotating speed up to 20 m/s
•Special carbon face seals: can operate up to 540°C (1004°F) and at speeds up to 70,000 RPM
•Several types of secondary seals:
•Bellows secondary seals: up to 540°C (1004°F), good vibration performance,
maintenance free
•O-Ring secondary seals: most economical, up to 130°C (266°F)
•PTFE secondary seals: temperature resistance up to 200°C (392°F)
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
Sealing Systems
SERVICES
R&D
Back to Markets
QDS, KENOL®, Bolted Flanges, Tri-Clamps
Main features
•Quick tightening
•Space saving
•Easy assembling
•Remote handling
•Temperatures from -196°C to 600°C (-321°F to 1112°F)
•Pressure: from vacuum to high pressure (500 bar)
•Standard and engineering design
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Bellows
R&D
Back to Markets
BELFAB® Machined and Edge-Welded Metal Bellows
Main features
Metal Bellows permit flexible engagement, and misalignment
with positive spring force machined bellows:
•One piece construction, flanges included
•High spring rate, very low tolerance for axial displacement
•Variable wall thickness and thick wall thickness possible
Welded bellows:
•Series of welded stamped diaphragms
•Low spring rate, high tolerance for axial displacement
•Pressure: full vacuum to 70 bar
•Temperature: cryogenic to 650 °C (1202°F)
•Cycle life: 1 to 10 million
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Hydrodynamic Seals
R&D
Back to Markets
Hydrodynamic “Lift-Off” Seals for Critical
Aerospace Applications
Main features
•Operates in wide range of temperatures between cryogenic and 1000°F (538.8°C) for bellows-energized seals and -65°F and 400°F (-53.9°C and 204.4°C) for spring-
energized seals
•Withstands pressures up to 150 psid
•Excellent high-altitude performance with low leakage rates
•Service life of more than 20,000 hours
•Sizes: 1in - 6in diameters
•FAA certified
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Polymer Technologies
R&D
Back to Markets
Plastic shapes, Machining, Injection Molding,
Fabrication and Tapes
Main features
PTFE Tapes, Seals, Shapes and Fibers:
•Compression molded
•Virgin, high purity, modified, or filled compounds
•Skived or molded sheet
PEEK Shapes and Injection Molded Components:
•Semi finished sealing rings up to 2.4m diameter in PEEK and filled PEEK grades
•Unique joining process
Plastic Machining and Fabrication:
•Experience with all engineered polymers: PTFE, G-10, PEEK,
ULTEM®, DELRIN®, Polycarbonate, Polypropylene, etc
•Tight tolerances
•5th axis capabilities
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
Assemblies and Electrostatic Chuck (ESC) Pedestals
SERVICES
R&D
Back to Markets
Main features
Pressure Vessels:
•Manufactured to clients specifications and certified to international codes
and standards (CODAP, EN 13455)
•Materials range from standard stainless steel to special alloys (INCONEL®, HASTELLOY®, …)
Subsystems chamber assemblies:
•Custom built fabricated equipment: chemical enclosures,
clean room furniture, valve and glove boxes, etc
•Complex assembly configurations of formed and machined parts
•Sub-assemblies, including hardware installation
Electrostatic Chuck (ESC) Pedestals:
•Metal and Ceramic
•New & Refurbished
•Provides lift, RF, heat and gas delivery for wafer in process
•Platforms - PVD / MCVD
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
Spiral Wound Gaskets
SERVICES
R&D
Back to Markets
VITAFLEX®
Main features
•Design adaptable for all types of assemblies
•Wide choice of materials (Inox, INCONEL®, monel, PTFE or fibers)
•Sealing up to 10-5 Pa.m3/s Helium
•Temperature up to 900°C (1652°F)
•Pressure up to 350 bar
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Burst Discs
R&D
Back to Markets
SAFE-SHEAR ®
Main features
•High level of accuracy and dependability: Burst pressure setting range
from 1 psi to over 1000 psi (0.07 to 70 bar / 7 to 7000 kPa)
•Operating temperatures from -271°C to > +540°C (-452°F to > +1000°F)
•Burst setting 100% verifiable and adjustable by non destructive testing
•Allows continuous pressure cycling operation up to 95% of set burst pressure
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Acoustic Media and Abradable Seals
FELTMETALTM Components
Main features
Acoustic Media: FELTMETALTM
•High temperature resistance, exceptional performance at high frequencies
•Optimum performance through acoustical impedance matching
•Readily cleanable, reliable performance in wet conditions
•Excellent erosion and corrosion resistance, low non-linearity factors
Abradable Seal: FELTMETALTM
•Micron Size Fiber Sinter Bonded Into A Continuous Felt
•Typically Hast-X or FeCrAlY
•Clean Cutting With Minimal Blade Wear
•Erosion Resistance
•Max Tip Speed 1400 fps (426 m/s)
•Max Temp 704°C (1300°F)
R&D
Back to Markets
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Brush Seals
R&D
Back to Markets
Metallic Brush Seals, HELICOCARBTM Carbon Brush Seals
Main features
Metallic Brush Seal
•Absorbing radial deflections between the shaft and rotor during transient operation
•Reduce leakage 5 to 17 times by replacing labyrinth seals with brush seals thus providing significant turbo-machinery efficiency and output gains
•Diameter ranging from 2 inches to 110 inches
•Manufacturing methods include machining, brazing, plating, welding, & heat treating
Carbon Brush Seal: HELICOCARBTM
•Any erosion effect on the shaft
•Can cope with shaft misalignment of 0.1 to 0.3 mm
•Outperform labyrinth seal on aircraft engines
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
Turbine Components
SERVICES
R&D
Back to Markets
Fuel Nozzle Components, Combustion Components,
Hot Gas Path Components
Main features
•Fuel nozzle, combustion and hot gas path components
•Components with exceptional performance and durability under extreme conditions
•Help improve combustion efficiency and lengthen turbine service intervals
•Components made from stainless steel and nickel-cobalt exotic alloys :
all grades for HASTELLOY® and INCONEL®, HS-188, L605, and X-750
•Value added services: forming, thermal spray, wear coatings, electron beam welding
and texturing
•High performance combustion components that increase turbine efficiency
•In house testing and inspection
•Precision-engineered Hot Gas Path components for Optimized Turbine Operation
•Full suite of fabrication and machining capabilities
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
Surface and Seal Coating Technologies
Seal Coatings, Surface Texturing & Fluoropolymer
Etching
Others Services
Engineering Capabilities and Advanced Assembly
MARKETS
PRODUCTS
SERVICES
On-Site Services
PREST, Engineering, Expertise
Plastic and Metal Machining
Forming, Drilling, Welding and Heat treating
R&D
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Surface and Seal Coating Technologies
R&D
Back Services
Seal Coatings, Surface Texturing & Fluoropolymer Etching
Main features
Surface Texturing
•Electron beam is manipulated through a series of magnetic deflection coils
at a very rapid rate
•This action melts and “stirs” the substrate, allowing us to create patterns on the surface
•No mechanical contact with the substrate
Seal Coatings •Technetics Group metal seals can be coated with a wide variety of materials.
Coating selection is usually based on system fluid compatibility and temperature.
(PTFE, Gold, Silver, Nickel, Tin, EM-1114 HVOF T-800 (low & high oxide), EM-1114F plasma T-800, Plasma abradables)
Fluoropolymer Etching •Ensure an excellent bond every time
•The treatment can be accomplished on one or more surfaces, or selectively within
close tolerances on films, sheets, tubing or other 3D shapes
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
On-Site Services
PRODUCTS
SERVICES
R&D
Back Services
PREST , Engineering, Expertise
Main features
•Cost optimization of on-site maintenance
•Fugitive emissions control (VOC)
•On-site training
•Customized R&D studies
•On-site expertises
•Characterization tests
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Others Services
R&D
Back Services
Engineering Capabilities and Advanced Assembly
Main features
Engineering Capabilities
•Strong engineering teams
•Robust design tools: ANSYS®, Pro E, SolidWorks 3D, Unigraphics, AutoCAD®
•Peening
•Refurbishment
•Heat Treating
•Inert gas atmosphere while heat treating parts to control oxidation and corrosion
•Aluminum diffusion coatings in atmosphere controlled furnace
•Ability to Support Rapid Development
Advanced assembly
•High efficiency assembly and testing services to satisfy your system integration needs
•Delivery of completed, fully tested assemblies directly to your integration point,
final test facility, or to any depot for spares consumption
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
Plastic and Metal Machining
R&D
Back Services
Forming, Drilling, Welding and Heat treating
Main features
Plastic machining
•Screw machining to 2 3/8” diameter and Manual lathe to 54” diameter
•Drill holes as small as 0.003 “
•Machine parts as small as 0.020”
•CAD/CAM programming with use of Solidworks, AutoCAD® & Mastercam
•Components: PEEK, NORYL®, Polypropylene, PVC, G10, UTEM® & TORLON®
Metal machining
•Forming - press brakes from 75 to 400 tons, rolling, custom specialty sizing machines
•Punching and Stamping - CNC turret punches
•Cutting - laser, water jet, shearing, sawing, oxy fuel and plasma arc
•Heat Treating - vacuum furnace
•Custom Welding - manual, semi- and fully-automatic, plasma, GTAW, spot and continuous
resistance systems
•Finishing, blasting and CNC machining
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
maestral® Sealing Laboratory
The laboratory that uses science to serve sealing
Collaboration between Technetics Group & CEA since 1969
SEALING LABORATORY MISSIONS
QUALIFICATION: Simulation of actual working conditions in
order to qualify sealing solutions in specific environment.
CHARACTERISATION: Fundamental tests aiming at
understanding in detail the seal behaviour.
EXPERTISE: Physical, mechanical and numerical analysis aiming
at understanding sealing mechanisms or at explaining failure.
DEVELOPMENT: Complete projects utilizing all equipments
and resources to design, characterize and qualify new products.
Equipment
Hydraulic presses (up to 2500kN)
Ovens and furnaces (up to 1100°C/2012°F)
Test benches
Gas booster pressure unit (2000 bar)
Measuring instruments & data acquisition systems
(measurement column, computer-controlled microscope, microdurometer,
helium-mass spectrometers, 3D laser profilometer)
CAD-CAM design tools, finite elements calculation,
3D simulation
MARKETS
PRODUCTS
SERVICES
R&D
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
Examples of R&D Programmes
1. Bending test on vacuum flange system / ITER
2. Rotating plug test mock-up / ASTRID
3. Aluminosilicate seals for extreme temperatures
4. High pressure test mock-up (2100bar)
FUNDAMENTAL
RESEARCH
1
1
2
3
4
2
APPLICATIONS
3
4
1. ITER project
2. ASTRID project
3. New projects for aerospace
4. Oil & Gas exploration and production
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
...Became Technetics Group Houston
2011
Plastomer Technologies became Technetics Group Houston,
operated under Technetics Group business unit
2006
Amicon Plastics purchased by EnPro Industries and operated
as part of Plastomer Technologies
2004
Texolon and Plastomer Products (Newtown, PA) operated as
Plastomer Technologies
2002
Spinoff of EnPro Industries from Goodrich
1999
Merger Coltec/BF Goodrich --> Goodrich
1998
Texolon purchased by Coltec Industries
1988
Texolon began molding/machining PTFE
Products Milestones
2003
PEEK joining of curved extruded large rings DIA > 700 mm
2001
PTFE fiber, uses are: dental floss, outdoor thread, suitures
2000
Iso-static molding capability: scrap reduction initiative
PEEK Curved Extrusion for large Split Rings DIA > 700 mm
1994
Developed 60” wide PTFE skived sheet
1986
PEEK Transfer Moulding for bushings up to 6 kg
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
...Became Technetics Group Oxford
2015
Acquisition by Technetics Group
2006
The company moves to a brand new plant in Oxford, MA
2014
Opening of a rapid prototyping facility in Greenville, SC
2000
Creation of a product library of over 5,000 parts, with a focus
on fabricated components made from exotica alloys. The parts
are principally used in industrial gas turbines
2012
Qualification on brush seal manufacturing, growing the business rapidly
after years of development with a major customer
2011
Acquisition of Johnson Tool & Manufacturing in Charlton, MA which became
a sixteen person machine shop
1985
Fabrico is founded in central Massachusetts by three sheet
metal workers. The name is a blend of the two words
“Fabrication Company”
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
...Became Technetics Group Columbia
2011
Name changed to Technetics Group Columbia, operated under
Technetics Group business unit
2002
Helicoflex operated as part of Garlock, an EnPro Industries company
Spinoff of EnPro Industries from Goodrich
1999
Merger Coltec/BF Goodrich --> Goodrich
1998
Purchased by Coltec Industries, name changed to Helicoflex
1990
Metal seal division of Furon purchased by Carbone Lorraine.
Transfer of metal seal division of Carbone Lorraine to Columbia
1988
Fluorocarbon changed its name to Furon
1980
UAP was split between Parker Hannifin and Fluorocarbon.
Columbia location acquired by Fluorocarbon
1955
United Aircraft Products (UAP) Company founded, main products are metal
O-Rings for the aircraft and nuclear power industries
Products Milestones
1990
Production of HELICOFLEX® seals began
1980
Production of metal C-Ring, primarily for aircraft
industry began
1960
Began production of Reactor Pressure Vessel O-Ring
under United Aircraft Products
R&D
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
...Became Technetics Group France
2012
Name changed to Technetics Group-France, operated under
Technetics Group business unit
2003
Cefilac is renamed Garlock France
2002
Spinoff of EnPro Industries from Goodrich
1999
Merger Coltec / BF Goodrich --> Goodrich
1998
Coltec Industries acquires Cefilac
1988
Transfer of Cefilac to Carbone Lorraine
1969
Take-over by Pechiney Group and License agreement with CEA
and creation of a joint-venture laboratory
1879
Beginning of Vital Fargere Aime : metalloplastic gaskets
for steam engines
Products Milestones
2014
Development of a new GYLON® diaphragm for valves
2007
Development of BIO-GUARDIAN® silicone seal
1987
Development of ORIGRAF® die-formed seal
1973
Development of GPA® mechanical seal
1972
Development of CEFIL’AIR® inflatable seal
1971
First patent CEA/CEFILAC for HELICOFLEX® metal seal
1950
Spiral wound gasket VITAFLEX®
R&D
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
...Became Technetics Group Daytona
2011
Acquired by EnPro Industries, name changed to Technetics Group Daytona
and operated under Technetics Group business unit
2008
Acquired Precision Coat of Florida, built new thermal spray facility
2006
Became Tara Technologies
Products Milestones
2016
Developed the Hydrodynamic “Lift-Off” seal product line
1998
Purchased by EG & G Perkin Elmer
2008
Acquired Precision Coat of Florida, began commercially offer
of advanced coatings
1991
Acquired by John Crane Int’l, Morton Grove, (IL)
1990
Developed PVD, CVD, and etch process systems
1981
Acquired by Pacific Scientific
1983
Purchased oil seal product line from Gits Brothers
1966
Acquired by Bailey Meter Company subsidiary of Babcock & Wilcox
1975
Purchased the mechanical seal line from Gits Brothers
1954
John Crane Belfab company created in Massachusetts,
moved to Daytona Beach in 1958
1954
Developed Edge-Welded Bellows technology
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
...Became Technetics Group Singapore
2011
Acquired by EnPro Industries, name changed to Technetics Group Singapore
and operated under Technetics Group business unit
2010
Received initial order from Schlumberger Singapore
for Subsea Edge-Welded Bellows
2006
Became Tara Technologies Singapore
2002
Developed Edge-Welded Bellows technology
2001
PerkinElmer Fluid Sciences Singapore and Batam was formed
Products Milestones
2012
Achieve 6.73 for Applied Materials Standardized Supplier Quality
Assessment (SSQA)
2012
Starting to ship Plastic Enclosure Boxes to Flextronics Singapore
2009
Add capability to cycle test Bellow Cores.
Requirement: 1 Million Cycles
2008
Implemented Automatic Internal and Outer Diameter
Welding Equipments
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
...Became Technetics Group DeLand
2014
Burbank operations transfered to DeLand
2011
Name changed to Technetics Group DeLand, operated under
Technetics Group business unit
Products Milestones
2009
Technetics acquired by Coltec Industries, an EnPro Industries company
1990
Technetics begins brush seal business designed for increased
air flow in engines and compressors
2002
Technetics relocates into new 50,000 sq ft manufacturing facility
1982
Technetics begins marketing abradable seal products
1990
Technetics management purchases seal business from Brunswick
1970
Brunswick acquires Huyck Metals (owner of the FELTMETALTM rights) and
creation of Technetics Division
ENGINEERED SOLUTIONS FOR DEMANDING ENVIRONMENTS ®
TECHNETICS GROUP
ENPRO INDUSTRIES
MARKETS
PRODUCTS
SERVICES
R&D
...Became Technetics Group Leicester
2012
Name changed to Technetics Group Leicester, operated under
Technetics Group business unit
2009
Wide Range acquired by Garlock, an EnPro Industries company
2008
Airbus approval
2006
Hawk Preferential supplier status
2003
AS9100 Certification
Received GE Aviation approval
BAE full approval
2002
BAE temporary letter of Approval / Wide Range Elastomers Limited formed
Products Milestones
2011
BAE Hawk Canopy Seal - Inflatable seal (Fabric reinforced silicone)
2008
VC10 DV (Direct Vision) cockpit window seals (Fabric reinforced
silicone vulcanised to aluminium window frame)
2005
Eurofighter package for GE & BAE = Pylon seals for drop tanks
(Fabric reinforced polyurethane)