Mid-Lift, Truck Mounted
Hydrant Dispenser
Model: 800-HSV-ML
VENTURI: Two (2) venturis, one of the overwing hose and one for the deck hoses,
sized to compensate for pressure loss in the deck hose.
FUELING HOSE REEL: Sized for 3” diameter hose, non-ferrous internals, explosion
proof electric rewind, auxiliary manual rewind. A shut-off valve is installed
immediately upstream of the reel.
HYDRAULIC LIFT: Hydraulic mast assembly, mounted behind the cab with platform
mounted controls, includes nozzle pressure gauge, emergency fuel system
shut-down, hydraulic override and deadman control. Platform is equipped with
an interlock to prevent vehicle movement with the platform in the raised position.
Designed to fuel all wide body aircraft, including the 777 and A380.
FUELING HOSES: One 2 ½” x 50’ and two 2 ½” x 11’ aviation fueling hoses with
N/R couplings, certified to API 1529 specifications..
Base Specifications
CHASSIS
UNDERWING NOZZLE: Three international standard 3-lug underwing nozzles with
quick disconnect and swivel.
Isuzu gas engine, automatic transmission, power steering, 14,500 lbs.
GVWR. Other chassis manufacturers, and diesel engines available as an
option. (Detailed chassis specifications available upon request.)
SENSE REEL: Spring rewind reel with rollers, 3/8” x 50” hose and sense plug.
STANDARD DIMENSIONS
SURGE SUPPRESSORS: Two (2) 7.5 gallon capacity with fill connection and panel
mounted pressure gauge.
23’L x 96”W x 07”H
REFUELING SYSTEM (800 GPM)
Other flow rated available.
HYDRANT COUPLER: Coupler to mate to 4” API hydrant valve with 90
degrees elbow and double swivel with pressure control. (See options for
other available couplers.)
HYDRANT HOSE REEL: Sized for 3” diameter hose, non-ferrous internals,
explosion proof electric rewind auxiliary manual rewind. A fully rated
butterfly valve is installed immediately down stream of reel.
HYDRANT HOSE: 3” x 40’ aviation fueling hose with N/R couplings,
certified to API 1529 specifications.
FILTER / MONITOR: Horizontal design – 800 G.P.M. rated and equipped
with a direct differential pressure relief valve, air eliminator and a manual
water drain. F/M meets EI/IP 6th edition. 5th Edition Filter separator
available as an option.
DEADMAN AND PRESSURE CONTROL: Inline deadman /pressure control
and shut-off. Provides secondary pressure control.
METER: 800 GPM rated with large numeral reset counter and totalize,
registers in whole U.S. gallons.
DEADMAN: One deadman reel assembly with 50’ of hose and one deadman
assembly with 7’ of hose on hydraulic lift platform.
PIPING: Schedule 10 seamless aluminum.
SLOP TANK: 20 gallon capacity, with fill opening, liquid level gauge and drain valve.
TEST: Flow tested with fuel for performance to rated specifications..
GAUGE PANEL: Instrumentation to fueling pressure gauge, inlet pressure gauge,
differential pressure gauge, DP purge valve, Millipore sample connections, pressure
regulator and emergency shutdown.
SAFETY FEATURES: Static reel with 50’ cable, brake interlock system, emergency
shut-down system, two fire extinguishers and an emergency stop on lift platform.
FINISH: Cab painted factory white. Equipment painted to customer requirements.
COMPLIANCE: Meets all applicable NFPA 407 codes. Design complies with ATA103 requirements.
Options
The above listed items are for a standard Garsite refueler. All units can be
customized to fit your specific requirements. Please contact your Garsite
representative for a complete list of available options and configurations.
ASME ‘U’ and ‘R’ Certified Facility
Garsite
Base specifications are accurate at the time of publication, and are
subject to change without notice. Custom options are available; please
consult your Garsite representative for additional information.
©2015 Wabash National L.P. All rights reserved. Wabash® and
Wabash National® are marks owned by Wabash National, LP
GAR 0006 10.15 - V1
539 South 10th Street
Kansas City, Kansas
garsite.com
sales@garsite.com
1-888-GARSITE (toll-free)
913-342-5600 (local or international)