CJA Equipment book Soilmec SR70 EQ# 3037 page 1 of 4
SR 70
CJA 3037
2007 Soilmec CFA Hydraulic Rotary Rig
Long stroke machine rotary goes to top of
mast. Can be quickly switched to a limited
C.F.A.
Kelly Bars Available
CJA #
Approx gross operating weight
(without
barBar
or tool)
(withoutkelly
Kelly
or Tool)
Length Elements Weight
8801
40.5
4x
14,000 lbs
8808
44
4x
14,500 lbs
8813
37.5
4x
13,000 lbs
8815
41.6
4x
14,250 lbs
169,000 lbs (76970 kg)
Counter Weight
23,950 lbs (10860 kg)
Rotary
19,840 lbs (9000 kg)
Width with Tracks Extended/Retracted
Overall Height (CFA)
14’ 7’’(4480mm)
/ 9’ 8’’mm)
(2946mm)
14' 7" (4480
83' 7" (25500 mm)
Vertical Counter Weight Clearance
3' 8" (1180 mm)
Maximum Pile Diameter
8' 2" (2500 mm)
Maximum Nominal Torque
Trucks needed for transport
Approx weight in transport mode CFA
(without
counterweight
or kelly
(without
counter weight
or bar)
Kelly Bar)
266 kNm
1 flatbed truck & 1 nine axle
145,500 lbs (66000 kg)
See DISCLAIMER on 1st page; for general information only, always refer to manufacturers manual
Spec’s are as of January 2009 and estimates only
CJA Equiipment book Soilmec SR70 EQ# 3037 page 2 of 4 See DISCLAIMER on 1st page; for general informaƟon only, always refer to manufacturers manual
CJA Equiipment book Soilmec SR70 EQ# 3037 page 3 of 4 See DISCLAIMER on 1st page; for general informaƟon only, always refer to manufacturers manual
CJA Equiipment book Soilmec SR70 EQ# 3037 page 4 of 4 Large diameter bored pile Max pile diameter Max cased diameter Max pile depth Max torque Max drilling speed (STD rotary) Max drilling speed (3gear high speed rotary) Spin off speed Main winch line pull Auxiliarry line pull Engine Max power Cylinder crowd (pull up/down force) Stroke Winch crowd (pull up/down force Stroke Main twin pumps Opera ng weight (‐w/o tools) 3 gear high speed rotary Max drilling speed Max torque Con nuous Flight Auger (CFA) 4 part pull Max pile diameter Max pile depth max pile depth (w. auger cleaner) Max extrac on force Machine weight, approx Cased Secan Piles (CSP/CAP) Max pile diameter Max pile depth Casing pull up/down Second rotary Max extrac on force Max casing speed Machine weight approx Reverse Circula on System (RC) Max pile diameter Max pile depth Max extrac on force Machine weight approx Diaphragm Wals (BH) Max sec on excava on Max wall depth Max extrac on force Machine weight approx 2500mm 2000mm 77m 266kNm 32rpm 30/54/121rpm 125rpm 240kN 140kN type 360kW 264/201kN 6500mm 320/201kN 15800mm 2x300l/min 75tons 1° 30rpm 271kNm 1200mm 25,5(19,5+6)m 24m 740kN 75tons 1000mm 21,5(15 cased)m 320kN 162kNm @30MPa 740kN 6rpm 80tons 2000mm 50m 3606kN 80tons 3000 x 1000mm 50m 256kN 70tons 8' 2'' 6' 7'' 252' 8'' 53,954lbs 31,473lbs DEUTZ TCD2015V06 482BHP @1900rpm 59,350/45,187lbs 21' 4'' 71,939/45,187lbs 51' 10'' 2° 3° 54rpm 121rpm 146kNm 18kNm 3' 11'' 83' 8'' (63' 11''+19' 8'') 78' 9'' 166,359lbs 3' 3'' 70' 6'' (49' 3'' cased) 71,939lbs 166,359lbs 6' 7'' 164' 1'' 810,661lbs 9' 10''x 3' 3'' 164' 1'' 57,551 See DISCLAIMER on 1st page; for general informaƟon only, always refer to manufacturers manual