APC206/207/208
Rail to Rail Output CMOS Single Operating Amplifier
Features
•
•
•
•
•
•
•
•
•
•
General Description
The APC206/207/208 brings performance and enconomy
with high gain, CMOS operating amplifier, combining rail
Operating Voltage Single Supply, 3V to 6V
Low Input Current, 2pA
to rail output range with large output current. It provides a
low input bias current 2pA.
Rail to Rail Output Swing
Push-Pull Output Driving
The output swing of the amplifier, guaranteed for loads
down to 1kΩ and output current to an 10Ω load from a 5V
High Output Current Drive, 310mA
Bandwidth:7MHz
power supply. APC206/207/208 designed to operate at
3V is especially well-suited for low voltage application.
Wide Temperature Range
Available in the SOT-23-5 Package
The APC206/207/208 is offered in the space saving SOT23-5 package.
Single Version of APC308
Lead Free and Green Devices Available
(RoHS Compliant)
Applications
•
•
•
Amplifiers
Filters
Analog Circuit
Ordering and Marking Information
Package Code
B : SOT-23-5
Temperature Range
I : - 40 to 85 oC
Handling Code
TR : Tape & Reel
Assembly Material
G : Halogen and Lead Free Device
APC206/207/208
Assembly Material
Handling Code
Temperature Range
Package Code
APC206/207/208 B :
206 X
207 X
208 X
X - Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright  ANPEC Electronics Corp.
Rev. A.3 - Mar., 2010
1
www.anpec.com.tw
APC206/207/208
Absolute Maximum Ratings
Symbol
VDD
TSC(O)
Parameter
Supply Voltage
Output Short-Circuit Duration, at TA=25°C, PTOT=1W
TA
Operating Ambient Temperature range
TJ
Maximum Junction Temperature
TSTG
TS
(Note 1)
Storage Temperature Range
Maximum Lead Soldering Temperature, 10 Seconds
Rating
Unit
7
V
20
S
-40 to 85
°C
150
°C
-65 to +150
°C
260
°C
Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Thermal Characteristics
Symbol
θJA
Parameter
Typical Value
Thermal Resistance from Junction to Ambient in Free Air (Note 2)
Unit
o
357
SOT-23-5
C/W
Note 2: θϑA is measured with the component mounted on a high effective thermal conductivity test board in free air.
Electrical Characteristics
VDD=5V , TA=25°C (unless otherwise noted)
Symbol
Parameter
APC206/207/208
Test Conditions
Unit
Min.
Typ.
Max.
TA=25°C
-
4
10
mV
-25°C< TA <75°C
-
5
-
mV
2
-
pA
VOS
Input Offset Voltage
IBIAS
Input Bias Current
TA =25°C
-
VICM
Input Common Mode Voltage Range
TA =25°C
0
-
VDD-0.8
V
RIN
Input Resistance
-
5
-
mΩ
VO
Output Voltage Swing
RL=2kΩ
0
-
5
V
VOH
Output Voltage High
RL=10kΩ, -25°C< TA <75°C
-
5
-
V
VOL
Output Voltage Low
RL=10kΩ, -25°C< TA <75°C
-
0
-
V
Output Current Source
VO=4.5V
-
-310
-
mA
Output Current Sink
VO =0.5V
-
370
-
mA
-
-80
-
dB
-
-50
-
dB
Large Signal Voltage Gain
-
85
-
dB
Gain Bandwidth Product
-
7
-
MHz
SR
Slew Rate
-
5.6
-
V/µs
ICC
Supply Current
-25°C<TA<75°C
-
2.0
4
mA
2.4V<VCC<6V, TA=25°C
-
2.5
5
mA
LOUT
CMRR
Common Mode Rejection Ratio
PSRR
Supply Voltage Rejection Ratio
AV
GBW
Copyright  ANPEC Electronics Corp.
Rev. A.3 - Mar., 2010
VRR=100mVPP, fin=100Hz,RL=2kΩ
2
www.anpec.com.tw
APC206/207/208
Typical Operating Characteristics
Supply Current vs. Supply Voltage
Supply Current vs. Temperature
2.0
4
No Load
Supply Current (mA)
Supply Current (mA)
VDD=5V
1.8
3.5
3
2.5
2
1.5
1
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.5
0.2
0.0
0
0
1
2
3
4
5
6
7
-25
0
25
50
75
Supply voltage(V)
Temperature(°C)
Input Offset Voltage vs. Temperature
Input Common Mode Voltage vs. Supply Voltage
7
6
VDD=5V
6
5
VICM (V)
VOS (mV)
5
4
3
3
2
2
1
1
0
4
0
-25
0
25
50
75
0
Temperature(°C)
2
3
4
5
6
7
Supply Voltage(V)
Output Swing vs. Temperature
Output Swing vs. Supply Voltage
6
8
RL=2kΩ
7
VDD=5V, RL=2kΩ
5
Output Swing (V)
Output Swing (V)
1
6
5
4
3
4
3
2
2
1
1
0
0
1
2
3
4
5
6
0
7
Supply Voltage (V)
Copyright  ANPEC Electronics Corp.
Rev. A.3 - Mar., 2010
-25
0
25
50
75
Temperature(°C)
3
www.anpec.com.tw
APC206/207/208
Typical Operating Characteristics (Cont.)
Output Current vs. Output Swing
Output Swing vs. Load Resistance
6
1000
VDD=5V
Output Swing (V)
Output Swing (mA)
VDD=5V
100
10
5
4
3
2
1
1
0.1
0
1
2
3
4
5
0
6
10
100
Output Swing (V)
Source Current vs. Output Voltage
Sink Current vs. Output Voltage
500
VDD=5V
Source Current (mA)
Sink Current (mA)
VDD=5V
400
300
200
400
300
200
100
100
0
0.2
0.4
0.6
0.8
0
1
0
0.6
0.8
1
6
VDD=5V
+90
0.4
Large Signal Frequency Response
Large Signal Voltage Gain vs. Frequency
+100
0.2
Output Voltage Referred to Vdd(V)
Output Voltage Referred to Ground (V)
VDD=5V, RL=2kΩ
5
Output Swing (V)
+80
+70
AV (dB)
10k
Load Resistance (Ω)
500
0
1k
+60
+50
+40
+30
+20
4
3
2
1
+10
+0
10
100
1k
10k
0
10
100k 1M 10M
Frequency (Hz)
Copyright  ANPEC Electronics Corp.
Rev. A.3 - Mar., 2010
100
1k
10k
100k 1M
10M
Frequency (Hz)
4
www.anpec.com.tw
APC206/207/208
Typical Operating Characteristics (Cont.)
CMRR vs. Frequency
100
+0
95
-10
90
-20
85
-30
80
-40
CMRR (dB)
75
70
65
60
VDD=5V,RL=10kΩ
-50
-60
-70
-80
55
-90
50
-100
1
2
3
4
5
10
100
10k
100k
Frequency (Hz)
Supply Voltage (V)
PSRR vs. Frequency
Voltage Follower Pulse Response
5
9
+0
VDD=5V
VRR=100mVPP/100Hz
VDD=5V,RL=2kΩ
8
Output Voltage (V)
-10
-20
PSRR (dB)
1k
-30
-40
-50
4
7
3
6
2
5
1
4
0
3
-1
-60
2
-2
-70
1
-3
-80
10
100
1k
10k
0
100k
Frequency (Hz)
0
1
2
3
Time (µs)
4
5
Input Voltage (V)
AV (dB)
Large Signal Voltage Gain vs. Supply Voltage
-4
Voltage Follower Pulse Response
0.5
0.2
VDD=5V,CL=270pF
0.1
0.3
0
0.2
-0.1
0.1
-0.2
0
-0.3
-0.1
-0.4
-0.2
0
1
2
3
4
Input Voltage (V)
Output Voltage (V)
0.4
-0.5
Time (µs)
Copyright  ANPEC Electronics Corp.
Rev. A.3 - Mar., 2010
5
www.anpec.com.tw
APC206/207/208
Block Diagram
APC206
1
VDD
2
IN
3
5
GND
+4
IN
SOT-23-5
(Top View)
IN
1
GND
2
IN
3
5
VDD
4
OUT
+-
OUT
APC207
SOT-23-5
(Top View)
APC208
OUT
1
GND
2
IN
3
5
VDD
4
IN
+-
SOT-23-5
(Top View)
Copyright  ANPEC Electronics Corp.
Rev. A.3 - Mar., 2010
6
www.anpec.com.tw
APC206/207/208
Package Information
SOT-23-5
D
e
E
E1
SEE
VIEW A
b
c
0.25
A
L
0
GAUGE PLANE
SEATING PLANE
A1
A2
e1
VIEW A
S
Y
M
B
O
L
SOT-23-5
INCHES
MILLIMETERS
MIN.
MIN.
MAX.
A
MAX.
0.057
1.45
0.00
0.15
0.000
0.006
A2
0.90
1.30
0.035
0.051
b
0.30
0.50
0.012
0.020
0.009
A1
c
0.08
0.22
0.003
D
2.70
3.10
0.106
0.122
E
2.60
3.00
0.102
0.118
1.80
0.055
0.071
E1
1.40
e
0.95 BSC
e1
0.037 BSC
1.90 BSC
0.075 BSC
L
0.30
0.60
0
0°
8°
0.012
0°
0.024
8°
Note : 1. Follow JEDEC TO-178 AA.
2. Dimension D and E1 do not include mold flash, protrusions or gate
burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil
per side.
Copyright  ANPEC Electronics Corp.
Rev. A.3 - Mar., 2010
7
www.anpec.com.tw
APC206/207/208
Carrier Tape & Reel Dimensions
P0
P2
P1
A
B0
W
F
E1
OD0
K0
A0
A
OD1 B
B
T
SECTION A-A
SECTION B-B
H
A
d
T1
Application
SOT-23-5
A
H
T1
C
d
D
W
E1
F
178.0±2.00
50 MIN.
8.4+2.00
-0.00
13.0+0.50
-0.20
1.5 MIN.
20.2 MIN.
8.0±0.30
1.75±0.10
3.5±0.05
P0
P1
P2
D0
D1
T
A0
B0
K0
2.0±0.05
1.5+0.10
-0.00
1.0 MIN.
0.6+0.00
-0.40
3.20±0.20
3.10±0.20
1.50±0.20
4.0±0.10
4.0±0.10
(mm)
Devices Per Unit
Package Type
Unit
Quantity
SOT-23-5
Tape & Reel
3000
Copyright  ANPEC Electronics Corp.
Rev. A.3 - Mar., 2010
8
www.anpec.com.tw
APC206/207/208
Taping Direction Information
SOT-23-5
USER DIRECTION OF FEED
Classification Profile
Copyright  ANPEC Electronics Corp.
Rev. A.3 - Mar., 2010
9
www.anpec.com.tw
APC206/207/208
Classification Reflow Profiles
Profile Feature
Sn-Pb Eutectic Assembly
Pb-Free Assembly
100 °C
150 °C
60-120 seconds
150 °C
200 °C
60-120 seconds
3 °C/second max.
3°C/second max.
183 °C
60-150 seconds
217 °C
60-150 seconds
See Classification Temp in table 1
See Classification Temp in table 2
Time (tP)** within 5°C of the specified
classification temperature (Tc)
20** seconds
30** seconds
Average ramp-down rate (Tp to Tsmax)
6 °C/second max.
6 °C/second max.
6 minutes max.
8 minutes max.
Preheat & Soak
Temperature min (Tsmin)
Temperature max (Tsmax)
Time (Tsmin to Tsmax) (ts)
Average ramp-up rate
(Tsmax to TP)
Liquidous temperature (TL)
Time at liquidous (tL)
Peak package body Temperature
(Tp)*
Time 25°C to peak temperature
* Tolerance for peak profile Temperature (Tp) is defined as a supplier minimum and a user maximum.
** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum.
Table 1. SnPb Eutectic Process – Classification Temperatures (Tc)
Package
Thickness
<2.5 mm
≥2.5 mm
Volume mm
<350
235 °C
220 °C
3
Volume mm
≥350
220 °C
220 °C
3
Table 2. Pb-free Process – Classification Temperatures (Tc)
Package
Thickness
<1.6 mm
1.6 mm – 2.5 mm
≥2.5 mm
Volume mm
<350
260 °C
260 °C
250 °C
3
Volume mm
350-2000
260 °C
250 °C
245 °C
3
Volume mm
>2000
260 °C
245 °C
245 °C
3
Reliability Test Program
Test item
SOLDERABILITY
HOLT
PCT
TCT
HBM
MM
Latch-Up
Copyright  ANPEC Electronics Corp.
Rev. A.3 - Mar., 2010
Method
JESD-22, B102
JESD-22, A108
JESD-22, A102
JESD-22, A104
MIL-STD-883-3015.7
JESD-22, A115
JESD 78
10
Description
5 Sec, 245°C
1000 Hrs, Bias @ Tj=125°C
168 Hrs, 100%RH, 2atm, 121°C
500 Cycles, -65°C~150°C
VHBM≧2KV
VMM≧200V
10ms, 1tr≧100mA
www.anpec.com.tw
APC206/207/208
Customer Service
Anpec Electronics Corp.
Head Office :
No.6, Dusing 1st Road, SBIP,
Hsin-Chu, Taiwan, R.O.C.
Tel : 886-3-5642000
Fax : 886-3-5642050
Taipei Branch :
2F, No. 11, Lane 218, Sec 2 Jhongsing Rd.,
Sindian City, Taipei County 23146, Taiwan
Tel : 886-2-2910-3838
Fax : 886-2-2917-3838
Copyright  ANPEC Electronics Corp.
Rev. A.3 - Mar., 2010
11
www.anpec.com.tw