SGM8705 Micro-Power, CMOS Input, RRIO, 1.4V, Push

advertisement
SGM8705
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
GENERAL DESCRIPTION
FEATURES
The SGM8705 is a dual low power comparator with a
● Ultra Low Power Consumption:
typical power supply current of 300nA (per channel). It
300nA/Channel (TYP) at VS = 1.4V
has the best-in-class power supply current versus
● Wide Supply Voltage Range: 1.4V to 5.5V
propagation delay performance. The propagation delay is
● Propagation Delay: 6μs (TYP) at VS = 1.4V
as low as 6μs with 100mV overdrive at 1.4V supply.
● Push-Pull Output Current Drive:
19mA (TYP) at VS = 5V
Designed to operate over a wide range of supply voltages,
● Rail-to-Rail Input
from 1.4V to 5.5V, with guaranteed operation at 1.4V,
● -40℃ to +85℃ Operating Temperature Range
2.5V and 5.0V, the SGM8705 is ideal for use in a variety
● Available in Green SOIC-8 and MSOP-8 Packages
of battery-powered applications. With rail-to-rail common
mode voltage range, the SGM8705 is well suited for
single-supply operation. Its small packages make this
APPLICATIONS
device ideal for use in handheld electronics and mobile
phone applications.
RC Timers
Window Detectors
Featuring a push-pull output stage, the SGM8705 allows
IR Receiver
for operation with absolute minimum power consumption
Multivibrators
when driving any capacitive or resistive load.
Alarm and Monitoring Circuits
SGM8705 is available in Green SOIC-8 and MSOP-8
packages. It is rated over the -40°C to +85°C
temperature range.
SG Micro Corp
www.sg-micro.com
REV. A. 2
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
PACKAGE/ORDERING INFORMATION
MODEL
SGM8705
PINPACKAGE
SPECIFIED
TEMPERATURE
RANGE
ORDERING
NUMBER
PACKAGE
MARKING
PACKAGE
OPTION
SOIC-8
-40℃ to +85℃
SGM8705YS8G/TR
SGM8705YS8
Tape and Reel, 2500
MSOP-8
-40℃ to +85℃
SGM8705YMS8G/TR
SGM8705YMS8
Tape and Reel, 3000
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, +VS to -VS………………………………….…...6V
VIN Differential….................................................................±2.5V
Voltage at Input/Output pins……….. (-VS) - 0.3V to (+VS) + 0.3V
Operating Temperature Range............................-40℃ to +85℃
Junction Temperature....................................................... 150℃
Storage Temperature.........................................-65℃ to +150℃
Lead Temperature (soldering, 10s) ...................................260℃
ESD Susceptibility
HBM..................................................................................4000V
MM......................................................................................400V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
PIN CONFIGURATIONS (TOP VIEW)
SGM8705
VINA+ 1
8
+VS
VINA-
2
7
VOUTA
VINB+
3
6
VOUTB
VINB-
4
5
-VS
SOIC-8/MSOP-8
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because
very small parametric changes could cause the device not to
meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
www.sg-micro.com
2
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
ELECTRICAL CHARACTERISTICS: VS = 1.4V
(At TA = 25°C, +VS = 1.4V, -VS = 0V, VCM = +VS/2, and VO = -VS, unless otherwise noted.)
PARAMETER
Supply Current (per channel)
Input Offset Voltage
SYMBOL
IS
VOS
TYP
MAX
VCM = 0.3V
CONDITIONS
MIN
300
1000
VCM = 1.1V
250
1000
VCM = 0V
-3
0.5
3
VCM = 1.4V
-3
0.5
3
Input Offset Average Drift
VCM Stepped from 0V to 0.3V
65
CMRR
VCM Stepped from 0.8V to 1.4V
75
Power Supply Rejection Ratio
PSRR
VS = 1.8V to 5.5V, VCM = 0V
VCM Stepped from 0V to 1.4V
Large Signal Voltage Gain
Output Swing High
VOL
75
dB
100
dB
VS = 1.8V, IO = 500μA
1.598
1.669
-40℃ ≤ TA ≤ +85℃
1.581
VS = 1.8V, IO = 1mA
1.324
-40℃ ≤ TA ≤ +85℃
1.288
82
IOUT
167
0.7
Sink
2.0
Overdrive = 10mV
12
Overdrive = 100mV
6
Propagation Delay
(Low to High)
Overdrive = 10mV
26
Overdrive = 100mV
17
tRise
Fall Time
tFall
SG Micro Corp
www.sg-micro.com
225
mV
253
Source
Propagation Delay
(High to Low)
Rise Time
112
127
-40℃ ≤ TA ≤ +85℃
VS = 1.8V, IO = -1mA
V
1.508
-40℃ ≤ TA ≤ +85℃
Output Current
dB
95
VS = 1.8V, IO = -500μA
Output Swing Low
mV
66
AVO
VOH
nA
µV/℃
2
Common Mode Rejection Ratio
UNITS
Overdrive = 10mV, CL = 30pF, RL = 1MΩ
220
Overdrive = 100mV, CL = 30pF, RL = 1MΩ
220
Overdrive = 10mV, CL = 30pF, RL = 1MΩ
155
Overdrive = 100mV, CL = 30pF, RL = 1MΩ
155
mA
μs
μs
ns
ns
3
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
ELECTRICAL CHARACTERISTICS: VS = 2.5V
(At TA = 25°C, +VS = 2.5V, -VS = 0V, VCM = +VS/2, and VO = -VS, unless otherwise noted.)
PARAMETER
Supply Current (per channel)
Input Offset Voltage
SYMBOL
IS
VOS
CONDITIONS
MIN
TYP
VCM = 0.3V
310
VCM = 2.2V
260
VCM = 0V
0.5
VCM = 2.5V
0.5
Input Offset Average Drift
2
MAX
UNITS
nA
mV
µV/℃
VCM Stepped from 0V to 1.4V
75
Common Mode Rejection Ratio
CMRR
VCM Stepped from 1.9V to 2.5V
80
VCM Stepped from 0V to 2.5V
80
Power Supply Rejection Ratio
PSRR
VS = 1.8V to 5.5V, VCM = 0V
95
dB
100
dB
Large Signal Voltage Gain
AVO
Output Swing High
VOH
Output Swing Low
VOL
Output Current
IOUT
Propagation Delay
(High to Low)
Propagation Delay
(Low to High)
Rise Time
tRise
Fall Time
tFall
SG Micro Corp
www.sg-micro.com
IO = 500μA
2.419
IO = 1mA
2.333
IO = -500μA
66
IO = -1mA
133
Source
5.3
Sink
7.7
Overdrive = 10mV
12
Overdrive = 100mV
5
Overdrive = 10mV
28
Overdrive = 100mV
19
Overdrive = 10mV, CL = 30pF, RL = 1MΩ
120
Overdrive = 100mV, CL = 30pF, RL = 1MΩ
120
Overdrive = 10mV, CL = 30pF, RL = 1MΩ
85
Overdrive = 100mV, CL = 30pF, RL = 1MΩ
70
dB
V
mV
mA
μs
μs
ns
ns
4
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
ELECTRICAL CHARACTERISTICS: VS = 5.0V
(At TA = 25°C, +VS = 5.0V, -VS = 0V, VCM = +VS/2, and VO = -VS, unless otherwise noted.)
PARAMETER
Supply Current (per channel)
Input Offset Voltage
SYMBOL
IS
VOS
TYP
MAX
VCM = 0.3V
CONDITIONS
MIN
350
1500
VCM = 4.7V
300
1500
VCM = 0V
-3
0.5
3
VCM = 5V
-3
0.5
3
Input Offset Average Drift
VCM Stepped from 0V to 3.9V
85
CMRR
VCM Stepped from 4.4V to 5.0V
85
Power Supply Rejection Ratio
PSRR
VS = 1.8V to 5.5V, VCM = 0V
VCM Stepped from 0V to 5.0V
Large Signal Voltage Gain
Output Swing High
VOL
85
dB
105
dB
IO = 500μA
4.923
4.952
-40℃ ≤ TA ≤ +85℃
4.916
IO = 1mA
4.864
-40℃ ≤ TA ≤ +85℃
4.848
52
IO = -1mA
-40℃ ≤ TA ≤ +85℃
Sink
-40℃ ≤ TA ≤ +85℃
104
12.1
15
19
Overdrive = 100mV
6
Propagation Delay
(Low to High)
Overdrive = 10mV
42
Overdrive = 100mV
33
tFall
SG Micro Corp
www.sg-micro.com
mA
12.9
13
Fall Time
mV
18
Propagation Delay
(High to Low)
tRise
130
143
14
Overdrive = 10mV
Rise Time
80
90
-40℃ ≤ TA ≤ +85℃
IOUT
V
4.904
-40℃ ≤ TA ≤ +85℃
Source
Output Current
dB
95
IO = -500μA
Output Swing Low
mV
66
AVO
VOH
nA
µV/℃
2
Common Mode Rejection Ratio
UNITS
Overdrive = 10mV, CL = 30pF, RL = 1MΩ
85
Overdrive = 100mV, CL = 30pF, RL = 1MΩ
85
Overdrive = 10mV, CL = 30pF, RL = 1MΩ
70
Overdrive = 100mV, CL = 30pF, RL = 1MΩ
60
μs
μs
ns
ns
5
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
SIMPLIFIED SCHEMATIC DIAGRAM
+VS
+
-
INVERTERS
INN
OUTPUT
INP
+
-
-VS
SG Micro Corp
www.sg-micro.com
6
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
TYPICAL PERFORMANCE CHARACTERISTICS
Supply Current vs. Supply Voltage
Supply Current vs.Common Mode Input
1000
VCM = 0.8V
1000
+85℃
Supply Current (nA)
Supply Current (nA)
1200
+25℃
800
600
400
-40℃
200
+85℃
800
+25℃
600
400
200
-40℃
VS = 1.4V
0
0
0
1
2
3
4
Supply Voltage (V)
5
6
0
1000
800
800
+85℃
600
+25℃
400
-40℃
200
+85℃
600
+25℃
400
-40℃
200
VS = 5V
VS = 2.5V
0
0
0
0.5
1
1.5
2
2.5
0
1
Common Mode Input (V)
Short Circult Sinking Current vs. Supply Voltage
2
3
4
Common Mode Input (V)
5
Short Circult Sourcing Current vs. Supply Voltage
30
30
Output Current Sourcing (mA)
Output Current Sinking (mA)
1.5
Supply Current vs. Common Mode Input
1000
Supply Current (nA)
Supply Current (nA)
Supply Current vs. Common Mode Input
0.5
1
Common Mode Input (V)
-40℃
25
+25℃
20
+85℃
15
10
5
0
-40℃
25
+25℃
20
+85℃
15
10
5
0
0
1
2
3
4
Supply Voltage (V)
SG Micro Corp
www.sg-micro.com
5
6
0
1
2
3
4
Supply Voltage (V)
5
6
7
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
Output Voltage Low vs. Sink Current
0.6
VS = 1.4V
0.5
0.4
VS = 5V
0.3
VS = 2.5V
0.2
0.1
0
0
1
2
3
4
5
6
Output Voltage Referenced to GND (V)
Output Voltage Referenced to GND (V)
TYPICAL PERFORMANCE CHARACTERISTICS
Output Voltage Low vs. Sink Current
0.6
+85℃
0.5
+25℃
0.4
-40℃
0.3
0.2
0.1
0
0
1
Sink Current (mA)
0.6
VS = 2.5V
0.5
VS = 1.4V
0.4
VS = 5V
0.3
0.2
0.1
0
0
1
2
3
4
Source Current (mA)
5
0.5
0.4
+85℃
0.3
+25℃
0.2
-40℃
0.1
0
0
VCM = VS /2
VOD = 20mV
-40℃
+25℃
40
1
2
3
4
Source Current (mA)
5
6
Propagation Delay vs. Supply Voltage
25
Propagation Delay H–L (µs)
Propagation Delay L–H (µs)
Propagation Delay vs. Supply Voltage
60
6
0.6
6
100
80
5
Output Voltage High vs. Source Current
Output Voltage Referenced to VS (V)
Output Voltage Referenced to VS (V)
Output Voltage High vs. Source Current
2
3
4
Sink Current (mA)
20
+85℃
0
VCM = VS /2
VOD = 20mV
20
-40℃
15
+25℃
10
5
+85℃
0
1
2
3
4
Supply Voltage (V)
SG Micro Corp
www.sg-micro.com
5
6
1
2
3
4
5
6
Supply Voltage (V)
8
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
TYPICAL PERFORMANCE CHARACTERISTICS
Propagation Delay vs. Overdrive
Propagation Delay vs. Overdrive
30
VS = 1.4V
VCM = 0.5V
50
40
Propagation Delay L-H (μs)
Propagation Delay L-H (μs)
60
-40℃
30
+25℃
20
10
+85℃
0
0
VS = 1.4V
VCM = 0.9V
25
-40℃
20
15
+25℃
10
+85℃
5
0
100
200
300
Overdrive (mV)
400
500
0
Propagation Delay L-H (μs)
Propagation Delay L-H (μs)
-40℃
30
+25℃
20
10
+85℃
0
500
VS = 5V
VCM = 4.5V
-40℃
50
40
+25℃
30
20
+85℃
10
0
0
100
200
300
Overdrive (mV)
400
500
0
100
200
300
Overdrive (mV)
400
500
Offset Voltage vs. Common Mode Input
Propagation Delay vs. Overdrive
1200
100
VS = 5V
VCM = 0.5V
80
-40℃
60
+25℃
40
VS = 5V
1000
Offset Voltage (μV)
Propagation Delay L-H (μs)
400
60
VS = 2.5V
VCM = 0.5V
40
200
300
Overdrive (mV)
Propagation Delay vs. Overdrive
Propagation Delay vs. Overdrive
60
50
100
+85℃
20
800
-40℃
600
400
200
0
+25℃
+85℃
0
0
100
200
300
Overdrive (mV)
SG Micro Corp
www.sg-micro.com
400
500
0
1
2
3
4
Common Mode Input (V)
5
9
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
TYPICAL PERFORMANCE CHARACTERISTICS
Propagation Delay vs. Common Mode Input
Propagation Delay vs. Common Mode Input
50
VS = 1.4V
VOD = 20mV
40
Propagation Delay L-H (μs)
Propagation Delay L-H (μs)
50
-40℃
30
+25℃
20
+85℃
10
0
VS = 2.5V
VOD = 20mV
40
+25℃
30
20
10
+85℃
0
0
0.3
0.6
0.9
1.2
Common Mode Voltage (V)
1.5
0
80
-40℃
60
+25℃
40
20
2.5
20
VS = 5V
VOD = 20mV
Propagation Delay H-L (μs)
Propagation Delay L-H (μs)
100
0.5
1
1.5
2
Common Mode Voltage (V)
Propagation Delay vs. Common Mode Input
Propagation Delay vs. Common Mode Input
+85℃
16
-40℃
12
+25℃
8
VS = 5V
VOD = 20mV
4
+85℃
0
0
0
1
2
3
4
Common Mode Voltage (V)
0
5
Propagation Delay (µs)
25
20
L-H
15
10
5
2
3
4
Common Mode Voltage (V)
5
60
VS = 1.4V
VCM = VS/2
30
1
Propagation Delay vs. Overdrive
Propagation Delay vs. Overdrive
35
Propagation Delay (µs)
-40℃
H-L
0
VS = 5V
VCM = VS/2
50
40
30
L-H
20
10
H-L
0
1
10
100
Overdrive (mV)
SG Micro Corp
www.sg-micro.com
1000
1
10
100
Overdrive (mV)
1000
10
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
TYPICAL PERFORMANCE CHARACTERISTICS
Propagation Delay vs. Resistive Load
Propagation Delay vs. Resistive Load
35
Propagation Delay (µs)
Propagation Delay (µs)
25
20
L-H
15
H-L
10
5
VS = 1.4V
0
30
L-H
25
20
15
H-L
10
5
VS = 5V
0
1
10
100
Resistive Load (kΩ)
SG Micro Corp
www.sg-micro.com
1000
1
10
100
1000
Resistive Load (kΩ)
11
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
PACKAGE OUTLINE DIMENSIONS
SOIC-8
0.6
D
e
2.2
E1
E
5.2
b
1.27
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
θ
c
A2
Symbol
Dimensions
In Millimeters
MIN
MAX
Dimensions
In Inches
MIN
MAX
A
1.350
1.750
0.053
0.069
A1
0.100
0.250
0.004
0.010
A2
1.350
1.550
0.053
0.061
b
0.330
0.510
0.013
0.020
c
0.170
0.250
0.006
0.010
D
4.700
5.100
0.185
0.200
E
3.800
4.000
0.150
0.157
E1
5.800
6.200
0.228
0.244
e
1.27 BSC
0.050 BSC
L
0.400
1.270
0.016
0.050
θ
0°
8°
0°
8°
SG Micro Corp
www.sg-micro.com
12
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
PACKAGE OUTLINE DIMENSIONS
MSOP-8
b
E1
E
4.8
1.02
e
0.41
0.65
RECOMMENDED LAND PATTERN (Unit: mm)
D
L
A
c
A1
θ
A2
Symbol
Dimensions
In Millimeters
MIN
MAX
Dimensions
In Inches
MIN
MAX
A
0.820
1.100
0.032
0.043
A1
0.020
0.150
0.001
0.006
A2
0.750
0.950
0.030
0.037
b
0.250
0.380
0.010
0.015
c
0.090
0.230
0.004
0.009
D
2.900
3.100
0.114
0.122
E
2.900
3.100
0.114
0.122
E1
4.750
5.050
0.187
0.199
e
0.650 BSC
0.026 BSC
L
0.400
0.800
0.016
0.031
θ
0°
6°
0°
6°
SG Micro Corp
www.sg-micro.com
13
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
W
P0
Q1
Q2
Q1
Q2
Q1
Q2
Q3
Q4
Q3
Q4
Q3
Q4
B0
Reel Diameter
P1
A0
K0
DIRECTION OF FEED
Reel Width (W1)
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Package Type
Reel Diameter
Reel Width
W1
(mm)
A0
(mm)
B0
(mm)
K0
(mm)
P0
(mm)
P1
(mm)
P2
(mm)
W
(mm)
Pin1
Quadrant
SOIC-8
13″
12.4
6.4
5.4
2.1
4.0
8.0
2.0
12.0
Q1
MSOP-8
13″
12.4
5.2
3.3
1.5
4.0
8.0
2.0
12.0
Q1
SG Micro Corp
www.sg-micro.com
14
Micro-Power, CMOS Input, RRIO, 1.4V,
Push-Pull Output Comparator
SGM8705
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Reel Type
Length
(mm)
Width
(mm)
Height
(mm)
Pizza/Carton
13”
386
280
370
5
SG Micro Corp
www.sg-micro.com
15
Download