Karin Payson  architecture + design
17 Jack Kerouac Alley  San Francisco, CA 94133
415-277-9500 fax: 415-277-9505  www.kpad.com
August 21, 2012
OUTLINE SPECIFICATIONS
Renaudin Residence
383 27th Street
San Francisco, CA 94114
06100 Rough Carpentry
1) Wood Deck: new deck to match finish quality and color of existing deck to be
removed.
06200 Finish Carpentry
1) Match (E) wood siding; patch and fill cracks and joints at transition points for a smooth
finish before priming.
2) Match (E) window casings & trim on interior & exterior
06400 Casework
1) 101- Breakfast room: Custom desk and shelving
a. Rift-sawn white oak with dark stain
2) 102- Kitchen: Sink cabinet; Sink front panel and under-panel doors OR new sink-cabinet
a. Shop finish, paint grade, match adjacent existing finish and profiles
3) Rear Deck: exterior quality paint-grade cabinet to accommodate grill, refrigerator, and
pre-fabricated utility drawers.
4) 204-Master Bath:: Vanity cabinet
a. Shop finish, paint grade
b. Overlay doors with profiles to match existing cabinet to be demolished
5) 206-Laundry closet: New cabinets
a. Tall narrow storage for ironing board + pull-out hanging rods (see dwg 3/A4.0) +
pull-out storage cabinet + plastic laminate folding counter above machines and
pull-out. Upper cabinets above counter; additional cabinets above will align with
adjacent flanking transom windows.
b. Paint grade, plain slab doors.
6) 205-Bedroom closet
a. Wood rod and paint grade shelf only
7) 200 – 303 Hall – Playroom: New stair rail and guardrail
a. Match existing guardrail pattern to continue from third floor to new fourth floor
b. Shop finish; paint grade pickets with hardwood handrail
8) 301 – 302 Bedroom closets
a. Wood rod and paint grade shelf only
9) 304-Bathroom vanity cabinet and custom built-in medicine cabinet
a. Shop finish, paint grade, overlay doors, shaker style with ogee.
b. Mirror in medicine cabinet recessed panel.
c. Adjustable tempered glass shelves in medicine cabinet.
10) Terrace- Storage cabinets
a. Exterior plywood; adjustable shelves
b. Exterior oil-based paint; color to match existing dominant siding color.
1 of 4
OUTLINE SPECIFICATIONS
383 27th STREET
07000 Thermal & Moisture Protection
1) Provide allowance for miscellaneous remedial waterproofing work where new additions
meet existing building envelope. Scope TBD by contractor.
2) (N) 4th Fl Terrace: provide layered membrane roofing under a final coat of Ardex or
similar for a stable walking surface.
07210 Insulation
1) Fiberglass batt insulation; R-30 in roof and R-19 in all new exterior walls.
07300 Roofing
1) New membrane roofing, light gray or white “cool” roof at new roof and stair roof at
Terrace.
08100 Doors
1) Reuse interior doors and hardware.
2) (N) Interior doors to match profile & hardware of existing.
08200 Windows
1) (N) Double hung wood windows w/ insulated glass in areas of new work; Marvin or
equal, fully operable top and bottom sash.
08800 Glazing
1) Low-e glass in windows.
2) Mirrors by owner, to be installed by GC.
3) Shower glass: tempered glass, frameless installation to ceiling, with chrome handle and
towel bar built on (see dwg 2.B/A4.0).
4) Shower niche glass: tempered glass, mortared into tile.
09250 Gypsum Board
1) Level 4 finish in all areas of new work
2) Where new finish is adjacent to existing (as at areas where new structural elements are
the principal scope of work), match adjacent finish.
09300 Tile & Stone
1) 102-Kitchen counter at sink
a. Match and patch existing granite (Juperano) countertop as required where new
sink will be installed.
2) Built-in Barbeque deck
a. Granite, 3/4” slab with eased edge. Selection TBD. Please provide allowance.
3) 204-Master Bath:
a. Floor, wainscot, and shower surround: Ann Sacks “Light Smoke” tile, 16 x 16
pattern. Wainscot to have “Plaza” molding; shower surround to have pencil liner
edge. Contact Maureen Callier at Ann Sacks.
b. Vanity counter: Marble, 3/4” slab with eased edge. Selection TBD. Please
provide allowance.
4) 304-Bath
a. Floor: Ann Sacks “Light Smoke” tile, 16 x 16 pattern. Contact Maureen Callier.
b. Wainscot, tub fascia and tub surround: 2 x 6 Ann Sacks tile “Earthenware Gloss”
with 1 x 6 trim “d” at top and edge of tub surround; color TBD. Contact Maureen
Callier.
2 of 4
OUTLINE SPECIFICATIONS
383 27th STREET
c. Vanity countertop and Tub deck:: Marble, 3/4” slab with eased edge. Selection
TBD. Please provide allowance.
09550 Wood Flooring
1) Refinish existing softwood floor where transitions require.
2) 101- Breakfast room: new softwood floor to match existing adjacent. See dwg. 4/A9.0
for transition detail. Stain new floor to match existing adjacent.
3) 102-Kitchen. Remove existing door threshold and replace with softwood threshold
transition between existing stone kitchen floor and new softwood floor.
4) 200, 205, 206—Hall, Bedroom, Laundry
a. Patch, match and repair existing softwood floor where walls are removed or
moved. Refinish all affected areas for a uniform appearance.
5) New stair: new softwood treads and risers to match existing stair.
09680 Carpet
1) (N) 4th floor and (N) stair: Carpet runner on new stair and wall-to-wall carpet throughout
the new 4th floor. Purchased separately by owner; GC to coordinate installation by carpet
vendor.
09900 Paint
1) (N) Interior paint in all new areas and areas where work requires touch-up painting; min
2 colors per room; Product to be Glidden (ICI) or Benjamin Moore.
2) (N) Exterior paint, min 3 colors; Product to be Glidden (ICI) or Benjamin Moore.
15000 Mechanical
1) Domestic hot water heater: Replace and upgrade existing unit per Title 24.
2) Heating system: Reuse existing furnaces and extend system to new additions. There is
one in the attic serving the current top floor; relocate this one to the closet in Bedroom
205. Extension of existing heating system to serve new additions is design-build; scope
TBD by Contractor.
15300 Fire Protection
1) New sprinkler system throughout the house. Design-build vendor has been contracted
separately by Owner. GC to coordinate installation and perform remedial finish work.
15400 Plumbing
1) 102-Kitchen
a. (N) Sink: Franke PSX1103310, undermount installation. GC to verify existing
cabinet size before purchasing.
b. Faucet: re-use existing
2) Rear Deck, BBQ area: supply a Natural Gas line to this location.
3) 204-Master Bath
a. Lavatory sinks: reuse existing sinks
b. Lav and Shower Faucets: reuse existing lav faucets and hand-held shower. (N)
shower head and controls: Kohler 16214-4A, pewter finish.
c. Shower: steam unit, GC to recommend size; preferred location is under the
shower bench; GC to verify clearance.
d. Toilet: Reuse existing.
e. Accessories: Kohler K-16147 towel bar, Kohler 16146 robe hooks, pewter finish.
Reuse existing TP holder.
4) 304-Bathroom
a. Tub: Kohler “Underscore” 5’ bath, K-1130, white.
3 of 4
OUTLINE SPECIFICATIONS
b.
c.
d.
e.
f.
383 27th STREET
Lav Sink: Kohler “Caxton” K-2211, white.
Toilet: Toto MS864113E, white.
Lav Faucet : Kohler K-16102, widespread, pewter finish.
Bath and shower trim set: Kohler K-16213-4A, pewter finish.
Accessories: Towel bars: Kohler 16150 (1 @ 24” wide) and Kohler 16147 (2 @
30” wide); robe hooks: Kohler 16146; TP holder: Kohler 16141. All to have
pewter finish.
15710 HVAC
1) Bathroom exhaust fans: Panasonic “Whisper Ceiling” Energy Star rated ventilation fan;
size to be determined by GC.
16000 Electrical
1) Low voltage recessed lighting: In all new areas and in all areas where new fixtures are
shown on Dwg E2.0: Halo H1499ICAT. In all other areas, leave (E) in place.
2) Exterior lighting: Hubbardton Forge 304901, Dark Smoke finish. Available through City
Lights, 1585 Folsom Street, contact Jacqueline Ableman.
3) Interior surface-mounted lighting: To be selected and purchased by Owner.
4) Provide outlets and switches per code in all areas of new work.
5) Provide electrical connection at exterior deck as required for Lynx exterior grill and
outdoor refrigerator.
4 of 4
Kitchen sink
SPECIFICATION SHEET
PRODUCT FAMILY : SINKS FINISH : STAINLESS STEEL SERIES : PROFESSIONAL SERIES MODEL : PSX1103010
Product Information
Article Number
US Part Number
Cabinet Size
Waste Outlet Diameter
Dimensions
Bowl Size
Number of Bowls
Type of Material
122.0167.433
PSX1103010
36"
3 1/2''
31 7/8"x18 1/8"
29 15/16"x16 1/8"x9 7/8"
1
16 ga Stainless Steel
Bathroom
Room 304
UNDERSCORETM
Features
•
•
•
•
•
5’ BATH
K-1130
Acrylic
Drop-in installation
Molded lumbar support
81 gallon (306.6 L) capacity
60″ (1524 mm) x 32″ (813 mm) x 21″ (533 mm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
• CSA B45.5/IAPMO Z124
• ASTM E162
• ASTM E662
Colors/Finishes
• 0: White
• Other: Refer to Price Book for additional colors/finishes
Accessories
• CP: Polished Chrome
• Other: Refer to Price Book for additional colors/finishes
• NA: None applicable
Specified Model
Model
K-1130
Description
5’ bath – drop-in
Required Accessories
K-7271
Clearflo slotted overflow brass bath drain OR
K-7272
Clearflo slotted overflow bath drain – PVC pipe
Optional Accessories
K-590
Under-mount kit
Colors/Finishes
❑0
❑ CP
❑ CP
❑ Other_____
❑ Other_____
❑ Other_____
❑ NA
Product Specification
The acrylic bath shall be 60″ (1524 mm) in length, 32″ (813 mm) in width, and 21″ (533 mm) in height. Bath shall be for drop-in
installation. Bath shall have an 81 gallon (306.6 L) capacity. Bath shall have a molded lumbar support. Bath shall be Kohler
Model K-1130-____.
Page 1 of 2
1087301-4-D
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
UNDERSCORETM
Technical Information
Installation Notes
Install this product according to the installation guide.
Fixture*:
Bathing well:
Basin area,
bottom
Basin area, top
Floor support under bath must provide for a minimum of 58
lbs/square foot (284 kg/square meter) loading.
42″ (1067 mm) x 23-1/2″ (597 mm)
55-1/8″ (1400 mm) x 27-1/8″ (689
mm)
75 lbs (34 kg)
The hot water supply should be 70% of the capacity of the
bath or greater. Installations will vary.
Weight
To overflow:
Water depth
17-1/8″ (43.5 cm)
Capacity
81 gal (306.6 L)
* Approximate measurements for comparison only.
Drop-in cut-out
59-1/2″ (1511 mm) x 31-1/2″ (800 mm)
12-5/8"
(321 mm)
No change in measurements if connected
with required drain illustrated. (K-7272)
16"
(406 mm)
1-1/2"
(38 mm)
60" (1524 mm)
1"
(25 mm)
2-1/4"
(57 mm)
32" (813 mm)
21"
(533 mm)
1-1/2"
Bath Drain
4-1/8"
(105 mm)
1/2" (13 mm)
Product Diagram
UNDERSCORETM 5’ BATH
Page 2 of 2
1087301-4-D
Toilet Room 304
MS864114E/MS863113E
Eco Supreme® One-Piece Toilet, 1.28GPF
FEATURES
• E-Max® flushing system, low consumption
(1.28GPF/4.8LPF)
• One-piece decorative toilet with low-profile tank
• Elongated front bowl with SoftClose® seat (SS114)
or round front bowl with SoftClose® seat (SS113)
• 12" Rough-in
• Chrome trip lever
MODELS
• MS864114E
Elongated bowl with SoftClose seat (SS114)
•
MS863113E
Round bowl with SoftClose seat (SS113)
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
PRODUCT SPECIFICATION
CODES/STANDARDS
The one-piece low consumption E-Max flushing
system toilet shall be 1.28GPF/4.8LPF. Toilet shall
be of elongated front bowl (MS864) or round front
bowl (MS863) with a low-profile tank and SoftClose
seat. Toilet shall have chrome trip lever. Toilet shall
be TOTO Model MS864114E_____ (elongated),
MS863113E_____ (round).
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and
others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB715, California
Green Building Code, City of Los Angeles Water
Efficiency Ordinance
MS864114E/MS863113E
Eco Supreme® One-Piece Toilet, 1.28GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
1.28 GPF/4.8LPF
E-Max®
8 psi (static)
10-1/4" x 8-1/4"
2-1/8"
12"
2-1/4"
One Year Limited Warranty
Vitreous china
MS864114E 89 lbs.
MS863113E 85 lbs.
•
Shipping Dimensions 29-1/2" L x 18"W
x 19-1/4" H1 x 27-1/8" H2
18-1/2" (470mm )
16-1/2" (420mm )
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
Double Combination Wye / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
MS864114E
MS863113E
5-1/2"
(140mm)
28" (710mm)
26-1/2" (675mm)
MS864114E
MS863113E
16-1/2" (420mm)
1" (25mm)
23-1/2"
(595mm)
15-3/4"
(400mm)
14-1/2"
(370mm)
12" (305mm )
6" (153mm)
5"
(130mm)
9-3/4" (250mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00205 v.05
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
Recessed Can, typ.
DESCRIPTION
Catalog #
H1499ICAT housing features an integral low voltage transformer.
For use with MR16 lamps. The H1499ICAT is for installations
where the housing will be in direct contact with insulation. The
H1499ICAT AIR-TITE™ design meets restricted air flow
requirements.
Project
HALO ®
Type
Comments
Date
Prepared by
SPECIFICATION FEATURES
Housing
• Double wall aluminum
construction for greater heat
dissipation.
• Gasketed to prevent airflow
from heated or air conditioned
spaces.
• Designed for insulated ceilings
in direct contact with
insulation. (May also be
installed in non-insulated
ceilings.)
Plaster Frame
• Galvanized steel construction.
• The inner housing can be
removed from plaster frame to
provide access to the junction
box.
• Plaster frame features include:
- Patented regressed locking
screw positioned for
securing hanger bars
from below the ceiling.
- Cutouts for easily crimping
hanger bars in position.
- AIR-TITE gasket is
pre-installed.
- HALO name embossed on
plaster frame
SLIDE-N-SIDE™ Junction
Box
• Positioned to accommodate
straight conduit runs
• Seven 1/2” trade size conduit
knockouts with true pry-out
slots
• Slide-N-Side wire traps
allow non metallic sheathed
cable to be installed
without tools and without
removing knockouts.
• Accepts a wide range of
non-metallic (type NM)
sheathed cables - the
standard cable types used in
lighting in both U.S. and
Canada.
- Allows wiring connections to
be made outside the junction
box
- Simply insert the cable
directly into the trap after
connections are made.
- Accommodates the following
standard non-metallic
sheathed cable sizes:
(US) #14/2, #14/3, #12/2,
#12/3
(Canada) #14/2, #14/3, #12/2
“Quick Connect”
Connectors
Three quick connect wiring
connectors included.
GOT NAIL! Pass-NThru™ Bar Hangers
• Pre-installed nail easily installs in
regular lumber, engineered
lumber and laminated beams.
• Safety and guidance system
prevents snagging, ensures
smooth straight nail penetration
and allows bar hangers to be
easily removed if necessary.
• Automatic levelling flange aligns
the housing and lets you hold
the housing in place with one
hand while driving nails.
• Housing can be positioned at
any point within 24˝ joist span.
• Pass-N-Thru feature allows
bar hangers to be shortened
without removing from plaster
frame.
• Score lines allow “tool-less”
shortening for 12˝ joists.
• Bar hangers may be
repositioned 90°.
• Integral T-bar clip snaps onto
T-bars - no additional clips
required
Low Voltage Transformer
Integral 120V magnetic
transformer steps line voltage
down to lamp operating voltage.
Thermal Protector
Thermal protector deactivates
fixture if overheating occurs due
to improper lamping.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Damp Location Listed
• UL/cUL Listed for Wet
Location, covered ceiling with select trims
• UL/cUL Listed for Feed
Through
• UL/cUL listed for Direct
Contact with insulation and
combustible material
Qualification
IC and AIR-TITE™
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used
to meet insulated ceiling and
restricted air-flow requirements
such as:
• Washington State Energy
Code
• International Energy
Conservation Code (IECC)
• New York State Energy
Conservation Construction
Code (NY-ECCC)
• State of California Title 24
“Recessed Luminaires in
Insulated Ceilings.”
H1499ICAT
4" Insulated Ceiling
AIR-TITE™
Low-Voltage Recessed
Housing
4" TRIMS
FOR USE IN
INSULATED CEILINGS
FOR DIRECT CONTACT
WITH INSULATION
Transformer Data:
Type: Magnetic
Primary: 120VAC, 60 Hz
Secondary: 11.5 ±0.3V
Socket
GU5.3 socket with reflector plate
for bi-pin 12V MR-16 lamps.
Slide-N-Side
™
7-3/8 inch
(187 mm)
7-1/8 inch
(181 mm)
12-1/2 inch
(318 mm)
Pass-N-Thru
™
1/2 inch
(13 mm)
4-1/2
(114 mm)
Ceiling opening
™
9-1/2 inch
(241 mm)
ADV110463
3/11/11
H1499ICAT
TRIMS
ORDERING INFORMATION
SAMPLE NUMBER: H1499ICAT-1421W
Order housing and trims separately.
Housing
Trims
H1499ICAT= 4" Insulated Ceiling
Small Aperture AIR-TITE
Low Voltage Housing
ADJUSTABLES
REFLECTORS
1421
BAFFLES
1419
1493
1453
Reflector Cone - 35° Tilt
50W 12V MR16
1421W=White Reflector with White
Trim Ring
1421C=Specular Clear Reflector with
White Trim Ring
1421AC=Antique Copper Reflector,
Antique Copper Trim Ring
1421H=Haze Reflector with White Trim Ring
1421CG=Champagne Gold Reflector with
White Trim Ring
1421RG=Residential Gold Reflector with
White Trim Ring
1421MB=Specular Black Reflector with
White Trim Ring
1421SN=Satin Nickel Reflector with
Satin Nickel Trim Ring
1421TBZ=Tuscan Bronze Reflector with
Tuscan Bronze Trim Ring
OD:
5 1/16" (129mm)
1 7/8˝ Open with Baffle - 35° Tilt
50W 12V MR16
1419P=Black Baffle, White Trim Ring
1419AC=Black Baffle, Antique Copper
Trim Ring
1419W=White Baffle, White Trim Ring
1419SN=Black Baffle, Satin Nickel
Trim Ring
1421TBZ=Black Baffle, Tuscan Bronze
Trim Ring
OD:
5 1/16" (129mm)
Coilex® Baffle - 35° Tilt
50W 12V MR16
1493P=Black Baffle, White Trim Ring
1493AC=Black Baffle, Antique Copper
Trim Ring
1493BC=Black Baffle, Black Chrome
Trim Ring
1493PB=Black Baffle, Polished Brass
Trim Ring
1493W=White Baffle, White Trim Ring
1493SN=Black Baffle, Satin Nickel
Trim Ring
1493TBZ=Black Baffle, Tuscan Bronze
Trim Ring
OD:
5 1/16" (129mm)
Metal Baffle - 35° Tilt
50W 12V MR16
1453AC=Antique Copper Baffle,
Antique Copper Trim Ring
1453SN=Satin Nickel Baffle,
Satin Nickel Trim Ring
1453TBZ=Tuscan Bronze Baffle,
Tuscan Bronze Trim Ring
OD: 5 1/16" (129mm)
1420
1498
1495
1496
Slot Aperture - 35° Tilt
(Slot - 1 3/8" X 2 1/8")
50W 12V MR16
1420P=White
1420AC=Antique Copper
1420SN=Satin Nickel
1420TBZ=Tuscan Bronze
OD: 5 1/16" (129mm)
Eyeball - 30° Tilt
50W 12V MR16
1498P=White Eyeball, Black Baffle
1498AC=Antique Copper Eyeball,
Black Baffle
1498PB=Polished Brass Eyeball,
Black Baffle
1498W=White Eyeball, White Baffle
1498BC=Black Chrome Eyeball,
Black Baffle
1498SN=Satin Nickel Eyeball,
Black Baffle
1498TBZ=Tuscan Bronze Eyeball,
Black Baffle
OD: 5-1/16" (129mm)
Gimbal Adjustable - 30° Tilt
50W 12V MR16
1495P=Satin White
1495AC=Antique Copper
1495SN=Satin Nickel
1495TBZ=Tuscan Bronze
OD: 5 1/16" (129mm)
1497
Adjustable Mirror
Trim - 90° Tilt
50W 12V MR16
1497P=White
OD:
5 1/16" (129mm)
1945
Metropolitan Ice Light
42W 12V MR16
1945=Clear Frosted
1945BLUE=Blue Frosted
OD:
5 5/16" (135mm)
1946
Metropolitan Deco
42W 12V MR16
1946PB=Polished Brass Accent with
Green Tint Translucent Rings
1946BC=Black Chrome Accent with
Green Tint Translucent Rings
OD: 5-5/8" (143mm)
SHOWER LIGHT
1951
Retractable Elbow Super Adjustable
- 60° Tilt
50W 12V MR16
1496P=White Eyeball and Trim Ring
1496AC=Antique Copper Eyeball and
Trim Ring
1496SN=Satin Nickel Eyeball and
Trim Ring
1496TBZ=Tuscan Bronze Eyeball and
Trim Ring
OD: 5 1/16" (129mm)
Regressed Lens Shower Light
50W 12V MR16
1951P=Shower Light, White Trim Ring,
Specular Reflector
1951ACS=Shower Light, Antique Copper
Trim Ring, Specular Reflector
1951SNS=Shower Light, Satin Nickel
Trim Ring, Specular Reflector
1951TBZS=Shower Light, Tuscan Bronze
Trim Ring, Specular Reflector
OD:
5 1/16" (129mm)
Accessories
Mounting Accessories
Filters and Lenses
The following filters and lenses can be substituted for the cover glass supplied
for use with MR16 lamps.
Color Filters
L112=Red Gel Filter
L114=Ultraviolet Dichroic Filter
L120=Red Dichroic Filter
L121=Amber Dichroic Filter
L122=Yellow Dichroic Filter
L123=Green Dichroic Filter
L124=Daylight Blue Dichroic Filter
L125=Blue Dichroic Filter
L127=Cosmetic (2700°K) Dichroic Filter
L121=Yellow Gel Filter
L121=Amber Gel Filter
Optical Lenses
L100N=Diffuse Sand Blasted Lens. Provides an even beam spread from MR16
lamps-especially useful in wall washing.
L111=Soft Focus Lens. Smoothes irregular beam pattern while maintaining high
controlled illumination levels and beam angles.
L113=Prismatic Spread Lens. Provides a symmetrical broadening of MR16 lamp beams.
L115=Fans the MR16 beam to produce a wide rectangular illumination pattern.
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801 ADV110463
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049
Exterior lighting
Lav faucet
Room 304
REVIVAL®
Features
•
•
•
•
•
•
•
•
•
•
•
WIDESPREAD BATHROOM SINK
FAUCET
Brass construction
Brass valve bodies
Quarter-turn washerless ceramic disc valves
Flexible connections for easy installation
Available with scroll or traditional lever handles
For 8″ (203 mm) or 16″ (406 mm) centers
Stationary spout
5-1/4″ (133 mm) spout reach
Pop-up drain with tailpiece
Complements Revival® Suite
1.5 gallons (5.7 liters) per minute maximum flow rate
K-16102
Codes/Standards Applicable
Specified model meets or exceeds the following at date of
manufacture:
•
•
•
•
•
•
ADA
ASME A112.18.1/CSA B125.1
ICC/ANSI A117.1
NSF 61
EPA WaterSense®
All applicable US Federal and State material
regulations
Colors/Finishes
• CP: Polished Chrome
• Other: Refer to Price Book for additional colors/finishes
Accessories
• NA: None applicable
Specified Model
ADA
Model
Description
K-16102-4
Widespread bathroom sink faucet – scroll handles
Widespread bathroom sink faucet – traditional
handles
K-16102-4A
CSA B651
OBC
❑ CP
❑ Other ____
Optional Accessories
_____
Additional flow options are available (refer to the Kohler Price Book)
❑ CP
❑ Other ____
❑ NA
Product Specification
The two-handle widespread bathroom sink faucet shall be of brass construction with brass valve bodies. Product shall have a
maximum flow rate of 1.5 gallons (5.7 liters) per minute. Product shall feature quarter-turn washerless ceramic disc valves,
flexible connections for easy installation, stationary spout, and a 5-1/4″ (133 mm) spout reach. Product shall be for 8″ (203 mm)
or 16″ (406 mm) centers. Product shall be available with scroll or traditional handles. Product shall include a pop-up drain with
tailpiece. Product shall complement the Revival Suite. Faucet shall be Kohler Model K-16102-____-____.
Page 1 of 2
1108233-4-D
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
REVIVAL®
Installation Notes
Install this product according to the installation guide.
16" (406 mm) Max
8" (203 mm) Min
5-1/4"
(133 mm)
4-1/8"
(105 mm) 3"
(76 mm)
Ø 1-1/8"
Ø 7/8"
1-3/8"
(35 mm)
Max
7-1/4"
(184 mm)
Ø 2-1/4"
(57 mm)
1-1/4"
(32 mm)
Ø 2-1/4"
(57 mm)
1"
3"
(25 mm) (76 mm)
Ø 2"
(51 mm)
3-3/4"
(95 mm)
Scroll
1"
3"
(25 mm) (76 mm)
2-5/8"
(67 mm)
4"
(102 mm)
1-1/4" OD
Pop-Up Drain
Product Diagram
REVIVAL® WIDESPREAD BATHROOM SINK FAUCET
Page 2 of 2
1108233-4-D
3-1/2"
(89 mm)
Traditional
Ø 2"
(51 mm)
Bath and shower
Room 304
REVIVAL®
Features
•
•
•
•
•
BATH & SHOWER TRIM SET
K-16213
Brass construction
Brass valve bodies
1/2″ quarter-turn washerless ceramic disc valves
Available with scroll or traditional lever handles
For 8″ (203 mm) centers
ALSO K-16214, K-16217
Codes/Standards Applicable
Specified model meets or exceeds the following:
• ASME A112.18.1/CSA B125.1
Colors/Finishes
• CP: Polished Chrome
• PB: Vibrant® Polished Brass
• Other: Refer to Price Book for additional colors/finishes
Specified Model
Model
Description
K-16213-4
Bath and shower, scroll handles
K-16213-4A
Bath and shower, traditional handles
K-16214-4
Shower only, scroll handles
K-16214-4A
Shower only, traditional handles
K-16217-4
Valve only, scroll handles
K-16217-4A
Valve only, traditional handles
❑
CP
❑
CP
❑
CP
❑
PB
❑
PB
❑
PB
❑
Other____
❑
CP
❑
PB
❑
Other____
❑
CP
❑
PB
❑
Other____
❑
CP
❑
PB
❑
Other____
❑
Other____
❑
Other____
Product Specification
Two-handle bath and shower faucet shall be of brass construction. Faucet shall feature brass valve bodies. Faucet shall feature
1/2″ quarter-turn washerless ceramic disc valves, assuring positive handle stop positioning. Bath and shower faucet shall
include showerhead with arm and flange, 4-7/8″ (124 mm) diverter spout with NPT connection, and handles. Shower only faucet
shall include showerhead with arm and flange, and handles. Valve only faucet shall include handles. Faucet shall be Kohler
Model K-________-_____-_____.
Page 1 of 2
1025257-4-C
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
REVIVAL®
Optional Accessories
56373
Deep roughing-in kit for wall-mount and shower faucets. For all handles
except bath and shower faucets with stops
❑ CP
❑ Other _____
Installation Notes
Install this product according to the installation guide.
4"
(102 mm) 1"
(25 mm)
1/2" - 14
NPT
6-1/2"
(165 mm)
2-1/4"
(57 mm)
Min
3"
(76 mm)
Max
7-1/8"
(181 mm)
72" (1829 mm) 78" (1981 mm)
To Floor
(Typical)
4"
4"
(102 mm) (102 mm)
1/2" NPT
1/2" NPT
Hot
1/2" - 14
NPT
Ø 2-1/2"
(64 mm)
4-7/8" (124 mm)
1/2"
NPT
1/2" NPT
Cold
Top Of Rim
8" (203 mm)
Typ
4" (102 mm)
Bath Only
4" (102 mm)
Product Diagram
REVIVAL® BATH & SHOWER TRIM SET
Page 2 of 2
1025257-4-C
3"
(76 mm)
Scroll
4"
(102 mm)
Ø 2-1/2"
(64 mm)
3"
(76 mm)
Traditional
48" (1219 mm)
To Floor
(Shower Only)
1"
(25 mm)
Accessories, typ
REVIVAL®
Features
• Brass construction
• Traditional styling
• Complements Revival® faucet line
ACCESSORIES
K-16140
Colors/Finishes
• CP: Polished Chrome
• PB: Vibrant® Polished Brass
• Other: Refer to Price Book for additional colors/finishes
Specified Model
Model/Description
K-16140
Towel ring
❑ CP ❑ PB ❑ Other______
Model/Description
K-16147
30″ (762 mm) towel bar
❑ CP ❑ PB ❑ Other______
K-16141
Toilet tissue holder
❑ CP ❑ PB ❑ Other______
K-16148
18″ (457 mm) towel bar
❑ CP ❑ PB ❑ Other______
K-16142
Soap dish
❑ CP ❑ PB ❑ Other______
K-16149
Tumbler and toothbrush holder,
includes glass tumbler
❑ CP ❑ PB ❑ Other______
K-16143
Glass shelf
❑ CP ❑ PB ❑ Other______
K-16150
24″ (610 mm) towel bar
❑ CP ❑ PB ❑ Other______
K-16145
Oval mirror, includes pivot
mounting brackets
❑ CP ❑ PB ❑ Other______
K-16152
Revival 14″ (356 mm) double
toilet tissue holder
❑ CP ❑ PB ❑ Other______
K-16146
Robe hook
❑ CP ❑ PB ❑ Other______
K-16155
Towel shelf
❑ CP ❑ PB
Product Specification
The accessories shall be made of brass construction. Accessories shall have traditional styling. Accessories shall complement
Revival faucet line. Accessories shall be Kohler Model K-____-____.
Page 1 of 2
115451-4-ED
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
REVIVAL®
Installation Notes
Model/Description
K-16156
12″ (305 mm) grab bar
❑ CP ❑ PB ❑ Other______
Install this product according to the installation guide.
K-16158
18″ (457 mm) grab bar
❑ CP ❑ PB
K-16295
Knob cabinet hardware
❑ CP ❑ PB ❑ Other______
K-16296
Pull cabinet hardware
❑ CP ❑ PB ❑ Other______
3-3/4"
3-3/4"
(95 mm) K-16141 (95 mm) K-16142
K-16140
6-7/8"
(175 mm)
Ø 2-3/8"
(60 mm)
5-1/2"
(140 mm)
5-7/8"
(149 mm)
3-3/4"
(95 mm)
3-1/4"
(83 mm)
4-1/8"
(105 mm)
3-3/4"
(95 mm)
27-1/4"
(692 mm)
4-7/8"
(124 mm)
K-16147 = 32-7/8" (835 mm)
K-16148 = 20-7/8" (530 mm)
3-3/4" K-16150 = 26-7/8" (683 mm)
(95 mm)
Ø 2-3/8" (60 mm)
K-16146
Ø 2-3/8"
(60 mm)
8-1/8"
(206 mm)
4-7/8"
(124 mm)
5-3/4"
(146 mm)
6-3/8" (162 mm)
24-3/8"
(619 mm)
K-16143
4-7/8"
(124 mm)
3-3/4"
(95 mm)
5-1/8" (130 mm)
K-16147 = 30" (762 mm)
K-16149
K-16148 =18" (457 mm)
K-16150 = 24" (610 mm)
25-1/2"
Ø 11/16"
3"
(648 mm)
(17 mm)
(76 mm)
14"
Ø 1-1/16"
(356 mm)
(27 mm)
K-16152
2-5/8"
4-3/8"
Ø 7/8"
(67 mm)
(111 mm)
(22
mm)
Ø 3"
K-16296
(76 mm)
10-1/2"
K-16295
(267 mm)
K-16156 = 12" (305 mm)
K-16158 = 18" (457 mm)
Product Diagram
REVIVAL® ACCESSORIES
Page 2 of 2
115451-4-ED
Ø 2-3/8"
(60 mm)
28-1/2"
(724 mm)
K-16145
9-3/4"
(248 mm)
K-16155