Job Information Type Project Name ALR10 Location 10" QuickChange LED Retrofit Kit, NON-IC, 12W, 15.5W, 23W, 31.1W, 49.1W Recessed Lighting Replaces Existing 10" CFL, HID or Incandescent Recessed Fixtures with LED Date Quantity Contact/Phone Notes Features Optics LED Driver Diffuse lens mask the LED from direct view. The LED driver is remote mounted from the LED module, to allow for a lower operating temperature of the LED, longer life and serviceable separate from the LED module. The driver features a power factor greater than 0.9, and THD of less than 20%. The remote mount j-box is provided with an external thermal protection to sense over temperature, or incorrect installation. Reflector Constructed of spun aluminum, the reflector provides optimal distribution of light, excellent cutoff and low glare. LED Characteristics Available with high powered 12W, 15.5W, 23W, 31.1W or 49.1W CREE® LED chip that maintains uniform intensity with a maximum luminous flux of 857. 946, 1499, 1965 and 2735 respectively; with a typical 85 CRI and a minimum 35,000 hour life span. Available in 2700°K, 3000°K, 3500°K and 4000°K correlated colour temperature. LED Driver Upgrade Options 2-Wire Lutron®: Compatible with forward phase control technology, for use with Lutron forward phase controls (neutral wire required). 120V only, 50/60Hz, 40W max. 3-wire Lutron®: Compatible with standard 3 wire line voltage phasecontrol technology for consistent dimming performance and compatibility with all Lutron 3 wire fluorescent controls. Suitable for integration into a planned or existing EcoSystem lighting control solution. 120V, 50/60Hz, 40W max. Lutron® dimming is available for 26W and 34W only. Dimming The ALR10 is dimmable when used with 0-10V for 12-31.1W at 120V, or 0-10V for 49.1W at 347V only (Consult factory for compatible dimmers). Heat Sink Constructed of extruded aluminum designed to facilitate heat dissipation and reduce LED junction temperature. Environment SPECIFICATION Aperture Approved Location Application Beam Angle 10" Damp Recessed Flood 2700°K / 3000°K / CCT 3500°K / 4000°K Certification cETLus CRI 85 Cut Hole 9-1/2" (240mm) Dimming YES Dimming Tech As per power supply ® NO Energy Star Lamp Type LED Engine LM79 YES LM80 YES 857 / 946 / 1499 / 1965 Lumens / 2735 71.4 / 61 / 65.1 / 63.1 Lumen per watt / 55.7 Lumen Maintenance 70% @ 50,000 hrs Power Factor >0.9 Power Supply Type Constant Current Primary Voltage 120V / 277V / 347V Rated Life 35,000 hrs Warranty 5 Years 12W / 15.5W / 23W / Wattage 31.1W / 49.1W THD <20% Description The ALR10 is a series of commercial and architectural grade LED retrofit kits, combining high power LED with integral dimmable driver and a high grade aluminum reflector. The ALR10 can be used to convert existing commercial incandescent, HID and horizontal or vertical CFL downlight to an LED technology that will reduce operating costs and provides maintenance-free operation. Suitable for use in damp locations. 10/14 8-1/2" 216mm 34 26 8-1/2" 216mm 43 8-1/2" 216mm 9-1/2" 240mm 9" 229mm 10-5/8" 270mm Notes: Accessories should be ordered separately. For additional options please consult your A-Line Lighting representative. All trademarks are the property of their respective owners. Lutron is a registered trademark of Lutron Electronics Co., Inc. Due to our continued efforts to improve our products, product specifications are subject to change without notice. 9-3/8" 238mm 2-3/8" 60mm 43" 1092mm Ordering Guide Wattage Colour Temp. Beam Angle ALR10 - Reflector Finish - 10 : 12W 14 : 15.5W 26 : 20W 34 : 31.1W* 43 : 49.1W** 27 : 2700°K 30 : 3000°K 35 : 3500°K 40 : 4000°K W : Wide Trim Ring Finish Driver Option WP : White Plastic Leave blank for standard 120V Driver Ø : 0 - 10V Dimming L : Lutron Hi-Lume ® A-Series (3 Wire) E : Lutron Hi-Lume ® A-Series (EcoSystem®) M : Lutron Hi-Lume ® A-Series (2 Wire) 2 : 277V Input 3 : 347V Magnetic Stepdown 3E : 347V Electronic Primary* CUST : Custom HC : Semi-specular WH : White Note: * Only 30W can be dimmed with 3E (347V electronic primary) driver. ** 40W not available with Lutron dimming option, not compatible with 3E driver. Example: ALR10-4330W-WH-WP For other voltage options, contact your Liteline representative. LITELINE CORPORATION Info@ liteline.com 416-996-1856 www.liteline.com 1-866-730-7704 905-794-1990 1-888-738-9736 REV17/4.8.16 © Copyright 2016, Liteline Corporation Compatible Housings The ALR10 series is cETLus classified for use in most industry standard 10" luminaires including: A-Line : A10301, A10302, A10306, A10401, A10402, A10406, A10501, A10502, A10506, A10551, A10552, A10556, A10601, A10602, A10606 4 Basic Steps for Installing an LED Retrofit Kit 1 3 2 Turn power off. Remove lamps and reflector from pre-existing fixture. If ballast in place, disconnect from power supply. Do not remove ballast. Make hardwire connection to junction box. 4 Connect LED Retrofit to enclosed quick connector. Insert LED Retrofit into existing frame. Photometry ALR10-1030W : 10" QUICK CHANGE LED RETROFIT KIT, WIDE BEAM SPREAD, 12W Zonal Lumen Summary Zone 0-30 0-40 0-60 60-90 70-100 90-120 0-90 90-180 0-180 Lumens 588.0 772.8 813.4 15.4 13.6 11.8 828.8 29.1 857.8 % Luminaire 68.6% 90.1% 94.8% 1.8% 1.6% 1.4% 96.6% 3.4% 100% Polar Candela Distribution 180°170° 160° 150° 870 Illuminance at a Distance 140° Beam Width Center Beam FC 130° 725 4.6ft 4.0ft 52.7 fc 120° 8.0ft 13.2 fc 9.3ft 12.0ft 5.86 fc 13.9ft 290 110° 145 580 435 100° 16.0ft 3.29 fc 18.5ft CD: 0 90° 20.0ft 2.11 fc 23.2ft 145 80° 24.0ft 1.46 fc 290 70° 435 27.8ft Spread: 60.2° 60° 580 50° 725 870 VA: 0° 10° 20° 30° 40° - 0° H ALR10-1430W : 10" QUICK CHANGE LED RETROFIT KIT, WIDE BEAM SPREAD, 15.5W Zonal Lumen Summary Zone 0-30 0-40 0-60 60-90 0-90 Lumens 544.8 791.0 929.2 16.3 945.6 % Luminaire 57.6% 83.7% 98.3% 1.7% 100% Polar Candela Distribution 180°170° 160° 150° 680 Illuminance at a Distance 140° Center Beam FC 130° 567 453 340 227 42.4 fc 5.8ft 120° 8.0ft 10.6 fc 11.5ft 110° 12.0ft 4.72 fc 17.3ft 2.65 fc 23.1ft 28.8ft 100° 16.0ft CD: 0 90° 20.0ft 1.70 fc 113 80° 24.0ft 1.18 fc 227 70° 113 340 Beam Width 4.0ft 34.6ft Spread: 71.6° 60° 453 50° 567 1,680 VA: 0° 10° 20° 30° 40° - 0° H ALR10-2630W : 10" QUICK CHANGE LED RETROFIT KIT, WIDE BEAM SPREAD, 23W Zonal Lumen Summary Zone 0-30 0-40 0-60 60-90 0-90 Lumens 1,060.9 1,386.7 1,484.8 12.8 1,497.6 % Luminaire 70.8% 92.6% 99.1% 0.9% 100% Polar Candela Distribution 180°170° 160° 150° 1,600 Illuminance at a Distance 140° 1,067 800 533 4.0ft 93.8 fc 5.1ft 120° 8.0ft 23.5 fc 10.1ft 110° 12.0ft 10.4 fc 15.2ft 5.86 fc 20.3ft 25.3ft 100° 16.0ft CD: 0 90° 20.0ft 3.75 fc 267 80° 24.0ft 2.61 fc 533 70° 267 800 60° 1,067 50° 1,333 1,600 VA: 0° 10° 20° - 0° H 30° 40° Beam Width Center Beam FC 130° 1,333 30.4ft Spread: 64.7° ALR10-3430W : 10" QUICK CHANGE LED RETROFIT KIT, WIDE BEAM SPREAD, 31.1W Zonal Lumen Summary Zone 0-30 0-40 0-60 60-90 0-90 Lumens 1,377.7 1,801.7 1,942.7 20.5 1,963.2 % Luminaire 70.2% 91.8% 99% 1% 100% Polar Candela Distribution 180°170° 160° 150° 2,000 Illuminance at a Distance 140° Center Beam FC 130° 1,667 1,333 1,000 667 124 fc 5.0ft 120° 8.0ft 31.1 fc 10.1ft 110° 12.0ft 13.8 fc 15.1ft 7.78 fc 20.2ft 25.2ft 100° 16.0ft CD: 0 90° 20.0ft 4.98 fc 333 80° 24.0ft 3.46 fc 667 70° 333 1,000 Beam Width 4.0ft 30.2ft Spread: 64.4° 60° 1,333 50° 1,667 2,000 VA: 0° 10° 20° 30° 40° - 0° H ALR10-4330W : 10" QUICK CHANGE LED RETROFIT KIT, WIDE BEAM SPREAD, 49.1W Zonal Lumen Summary Zone 0-30 0-40 0-60 60-90 0-90 Lumens 2,031.4 2,630.2 2,721.6 10.2 2,731.7 % Luminaire 74.4% 96.3% 99.6% 0.4% 100% Polar Candela Distribution 180°170° 160° 150° 3,000 Illuminance at a Distance 140° Center Beam FC 130° 2,500 Beam Width 4.0ft 157 fc 120° 8.0ft 39.2 fc 9.6ft 12.0ft 17.4 fc 14.4ft 1,000 110° 500 2,000 1,500 4.8ft 100° 16.0ft 9.81 fc 19.2ft CD: 0 90° 20.0ft 6.28 fc 24.0ft 500 80° 24.0ft 4.36 fc 1,000 70° 1,500 60° 2,000 50° 2,500 3,000 VA: 0° 10° 20° - 0° H 30° 40° 28.8ft Spread: 62.0°