WALL WASH
®
BeveLED2.1
COLOR SELECT
3254
PROJECT INFORMATION
®
PROJECT
Covered By US Patents 8,581,520 and 8,456,109
DATE
TYPE
6000K, Full On 100%
3500K, Dimmed to 50%
2450K, Dimmed to 75%
Color Select Recessed Wall Wash - Independent color temperature and intensity control for LED lighting. Color Select® represents the next
innovation in color temperature control for advanced LED recessed downlighting. Color Select® products allow users to adjust color temperature
from 6000K down to 2200K while independently adjusting intensity to achieve ultimate control over the quality of light in a space with a single fixture
type. Color Select interfaces with standard dimming and control systems.
DELIVERED PERFORMANCE
BeveLED2.1
®
2200K
2700K
3000K
3500K
4000K
4500K
5000K
5500K
6000K
40
1100
575
32
1825
675
45
1200
650
35
2000
1075
47
1250
675
37
2075
1125
48
1300
700
39
2175
1150
50
1375
725
41
2275
1200
52
1375
750
42
2300
1225
52
1400
750
42
2350
1250
54
1450
775
43
2425
1300
54
1475
800
44
2450
1325
®
32W
16W
Color Select Wall Wash
Delivered Lumens Per Watt
Source Lumens
Delivered Lumens
Delivered Lumens Per Watt
Source Lumens
Delivered Lumens
LUMEN OUTPUT AND KELVIN TUNING
WITH USAI COLOR SELECT®
HOW TO SPECIFY
Ordering Example: Specify trim code and housing code to order:
Example : 3254W - B1 - 10 - LRTW4 - 6016 - CSD1 - 6022KS - NC - 120V - DIML3 - 010V - CB27
TRIM ORDERING INFORMATION
TRIM
3254
3254
Round
Wall Wash
BEVEL STYLE
OPTION
______
W
FLANGE FINISH
–
Wet location 1
–
B1 1” Regress Bevel,
Painted Die Cast
Matches Flange Finish
AB1 1” Regress Bevel,
Black Anodized
AC1 1” Regress Bevel,
Clear Matte Anodized
1 Wet location, use with B1
trims only.
01 Clear Matte
(AC Bevel only)
02 Black Anodized
(AB Bevel only)
10 White
13 Statuary Bronze
21 Black
28 Metalized Grey
RAL Custom Color
(specify RAL #)
HOUSING ORDERING INFORMATION
HOUSING
CODE
WATTAGE
LRTW4 –
LRTW4
6016 16W LED,
800 lumens
6032 32W LED,
1325 lumens
ENGINE
CODE
COLOR
– CSD1 –
6022KS
CSD1
6022KS
6000K-2200K
Tunable
White Light
80+ CRI
–
–
NC New Construction
CP Chicago Plenum2
IC Insulation-Contact
Rated / Airtight2
2
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
DIMMING DRIVER
OPTIONS
VOLTAGE
HOUSING TYPE
–
120V
277V
Not available with EM
1126 River Road
New Windsor, NY 12553
COLOR
CONTROL
–
DIML2 0-10V dim, 10%
(provided standard)
DIML3 Lutron Hi-Lume 1%
2-wire, 120V only
DIML4 Lutron Hi-Lume 1%
3-wire/ECO
DIML6A EldoLED 0-10V, 0.1%,
logarithmic / Lutron controls
DIML6B EldoLED 0-10V, 0.1%,
linear controls
DIML6E EldoLED 0-10V, 1%,
logarithmic/Lutron controls
DIML6F EldoLED 0-10V, 1%, linear controls
DIML7 EldoLED DALI, 0.1%
T 845–565–8500
F 845–561–1130
010V
010V
0-10V signal
transitions
color
temperature
from 6000K to
2200K
ACCESSORIES
–
CB27
CB52
EML
EMLW
27” C-Channel Bars
52” C-Channel Bars
Emergency battery 3
Emergency battery,
wet location 3
3 EM options have remote test
switch. Not for use with IC or CP
housings.
© 2013. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 08/18/2016
WALL WASH
®
BeveLED2.1 COLOR SELECT
®
3254
Covered By US Patents 8,581,520 and 8,456,109
TRIM INFORMATION
Bevel Finish
Flange Finish
41⁄2"Ø
51⁄2"Ø
HOUSING INFORMATION
New Construction
Universal Style Housing - NC
Chicago Plenum (16W) - CP
IC / Airtight (16W) - IC
New Construction
w/ Emergency - EM
Chicago Plenum (32W) - CP
IC / Airtight (32W) - IC
7"
77/16"
85/8"
11/8"
11/8"
11/8"
7"
7"
7"
13"
11/8"
7"
13"
13"
13"
185/8" (Plan View)
185/8" (Plan View)
185/8" (Plan View)
185/8" (Plan View)
22 /8" (Plan View)
22 /8" (Plan View)
22 /8" (Plan View)
221/8" (Plan View)
1
1
1
SPECIFICATIONS
TRIM: 4-1/2" round aperture with a 1" regressed bevel
and 1/2" flange, retained by two mounting clips. Die cast
aluminum bevel is self-flanged and is available in white,
statuary bronze, black, and metalized grey finishes. Also
available in black or clear matte bevel, with self finish or
painted flange. Custom color flanges available (provide
RAL#).
FIELD REPLACEABLE DIMMING DRIVER: 0-10V, 100%-10%
DIML2 solid state electronic constant current driver with
a high power factor provided standard and sources 2mA.
Specify 120V or 277V. Driver complies with IEEE C62.41
surge protection.
HOUSING: Fabricated of 20 ga. galvanized steel
with thru wire J-box, 4 in 4 out at min. 90°C, #12
AWG thru branch circuit wiring.
MAXIMUM CEILING THICKNESS: As per drawings
above.
COLOR CONTROL: Patented tunable white light transitions
CEILING CUT OUT: 5-1/16" Ø
color temperature from 6000K to 2200K from a 0-10V signal.
TRIM LENS: Trim is shipped with micro diffusion wall wash
LISTINGS: Dry/Damp. Wet location option available
DIMMING OPTIONS: Multiple dimming drivers available.
lens.
with B1 trim only. NRTL/CSA-US tested to UL
See compatibility chart attached. Some on-time delay may
standards. IBEW union made.
REFLECTOR: Proprietary precision injection molded wall
be experienced, depending on control system used. Note:
wash reflector.
DIML6A and DIML6E logarithmic control are intended for
WARRANTY: 5 years
use with Lutron control systems; DIML6B and 6F linear
ADJUSTMENT: 362° horizontal locking in 90° increments.
NOTES:
control are intended for use with non-Lutron controls.
• Not for use in corrosive environment.
DIML6 dimming drivers source 2mA
FIELD REPLACEABLE LIGHT ENGINE: Available in 2 lumen
• Use of pressure washer voids warranty.
packages: 16W and 32W. Engine is field replaceable through
EMERGENCY: Emergency lighting battery pack with remote • Consult factory for video capture applications.
the aperture without tools.
test switch is serviceable through aperture. EMLW wet
PHOTOMETRICS: Consult factory or website for IES
location option is available with B1 trim only and requires
RATED LIFE: Based on IESNA LM80-2008 50,000 hours at
remote test switch. Bodine BSL17C provides 200mA for 90 files. Tested in accordance with IESNA LM79-2008.
70% lumen maintenance (L70).
minutes. EM option is available with NC housings only.
THERMAL MANAGEMENT: Proprietary high performance
MOUNTING:
Butterfly brackets and adjustable nailer bars
aluminum die cast heatsink for maximum LED life. Ambient
with integral nails provided. Nailer bars are extendible from
temperatures at fixture location should not exceed 40°C
14" to 24" centers.
during normal operation.
USAI
Lighting
®
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2013. USAI, LLC.
All rights reserved.
All designs protected by copyright.
Revised 08/18/2016
INTENSITY DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML2 STANDARD DRIVER
®
USAI
Lighting
COLOR SELECT ®
Covered By US Patents 8,581,520 and 8,456,109
INTENSITY DIMMING DRIVER WIRING SCHEMES:
Note: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to
specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
STANDARD DRIVER: 0-10V Intensity Dimming Driver Wiring (Dims down to 10%)
NOTE: Consult dimmer manufacturer for detailed installation information.
For use with 0-10V type controls.
Use only with approved vendor models in table below
J-BOX WIRING FOR STANDARD DRIVER
NOTE: DRIVER SOURCES 2mA REFER TO
DIMMER MANUFACTURER FOR MAX LOAD
PURPLE - (+) 0-10V
TO NEXT FIXTURE
GRAY - (-) 0-10V
0-10V LED
DRIVER
BLACK - LIVE
WHITE - NEUTRAL
OUTPUT
PURPLE - (+) 0-10V
BLACK - LIVE
GRAY / ORANGE
TO NEXT FIXTURE
(+)
(-)
GRAY - (-) 0-10V
PURPLE / ORANGE
WHITE - NEUTRAL
GND
USAI
Color Select Controller
PCA-211
Input Voltage: 60 V Max
Input Current: 700ma Max
0-10V Signal Control
INPUT
COLOR SELECT™
LED LIGHT ENGINE
NOTE: USAI COLOR CONTROLLER SOURCES 2mA REFER TO DIMMER MANUFACTURER FOR MAX LOAD
(-) 0-10V
(+) 0-10V
0-10V COLOR
CONTROL
(DIMMER BY
OTHERS)
INTENSITY CONTROL
(BY OTHERS)
CONSULT DIMMER MANUFACTURERS FOR DETAILED
WIRING AND INSTALLATION INSTRUCTIONS
DIML2 Dimmer Compatibility Chart
Manufacturer
120V / 277V
Crestron
Crestron
Crestron
Crestron
Crestron
Leviton
Lightolier (Philips)
Lutron
Product
Part Number
Dimmed Light
Output Range
iLux dimmer expansion module
DIN Rail dimmer
DIN Rail analog output module
8 Channel dimmer module
8 Channel dimmer module
IllumaTech dimmer
Vega
Diva
CLS-EXP-DIMFLV
DIN-4DIMFLV4
DIN-A08
GLX-DIMFLV8
GLXP-DIMFLV8
IP710-DLX
V2000FAMU
DVTV-XX
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
100% - 10%
Qty Fixtures
Per Dimmer*
Use source current per
fixture specification
sheet to determine
number of fixtures per
dimmer. Max number
of fixtures is limited by
dimmer load rating.
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
®
USAI
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2014. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-228-2 Revised 09/26/2016
INTENSITY DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML3
®
USAI
Lighting
COLOR SELECT ®
Covered By US Patents 8,581,520 and 8,456,109
INTENSITY DIMMING DRIVER WIRING SCHEMES:
Note: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to
specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
DIML3 LED: Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / LED Dimming Driver Wiring (Dims down to 1%) 120V only.
J-BOX WIRING FOR DIML3
GREEN - GND
TO NEXT FIXTURE
BLACK - LIVE
WHITE - NEUTRAL
TO NEXT FIXTURE
(+)
(-)
BLACK - LIVE
GRAY / ORANGE
GROUND
PURPLE / ORANGE
WHITE - NEUTRAL
USAI
Color Select Controller
PCA-211
Input Voltage: 60 V Max
Input Current: 700ma Max
0-10V Signal Control
INPUT
COLOR SELECT ™
LED LIGHT ENGINE
OUTPUT
LUTRON HI LUME A SERIES
DRIVER 2 WIRE
NOTE: USAI COLOR CONTROLLER SOURCES 2mA
REFER TO DIMMER MANUFACTURER FOR MAX LOAD
(-) 0-10V
(+) 0-10V
0-10V COLOR
CONTROL
(DIMMER BY
OTHERS)
INTENSITY CONTROL
(BY OTHERS)
CONSULT DIMMER MANUFACTURERS FOR DETAILED
WIRING AND INSTALLATION INSTRUCTIONS
DIML3 Dimmer Compatibility Chart
Manufacturer
120V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Product
Part Number
Dimmed Light
Output Range
Sensor+ Cabinet
Unison DRd Cabinet
Maestro Wireless® dimmer
HomeWorks® QS adaptive dimmer
HomeWorks® QS 60W dimmer
HomeWorks® QS 1000 W dimmer
Stanza® dimmer
RadioRA® 2 adaptive dimmer
RadioRA® 2 1000 W dimmer
HomeWorks® QS wallbox power module
HomeWorks® wallbox power module
GRAFIK Eye® QS control unit
GRAFIK Eye® 3000 control unit
RPM-4U module
RPM-4A module
GP dimming panels
Ariadni CL 250W dimmer
Diva CL 250W dimmer
Grafik T CL or RF CL dimmer
ELV10
ELV10
MRF2-6ND-120HQRD-6NAHQRD-6NDHQRD-10NDSZ-6NDRRD-6NARRD-10NDHQRJ-WPM-6D-120HWI-WPM-6D-120
QSGR-, QSGRJGRX-3100-, GRX-3500HW-RPM-4U-120, LP-RPM-4U-120
HW-RPM-4A-120, LP-RPM-4A-120
Various
AYCL-253PDVCL-253P-, DVSCCL-253PGT-250M-, GTJ-250M-
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100% - 1%
100%-1%
100%-1%
100%-1%
Qty Fixtures Per Dimmer*
Typical
High Wattage
40W and Less 41W - 80W
1 – 26
1 – 13
1 – 26
1 – 13
1–8
1–4
1–8
1–4
1–8
1–4
1 – 13
1–6
1–8
1–4
1–8
1–4
1 – 13
1–6
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1 – 26
1 – 13
1–8
1–4
1–8
1–4
1–8
1–4
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
®
USAI
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2014. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-228-3 Revised 09/26/2016
INTENSITY DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML4
®
USAI
Lighting
COLOR SELECT ®
Covered By US Patents 8,581,520 and 8,456,109
INTENSITY DIMMING DRIVER WIRING SCHEMES:
Note: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to
specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
DIML4 LED: Lutron Hi-Lume A-Series LED Driver with Eco System Control / LED Dimming Driver Wiring (Dims down to 1%)
J-BOX WIRING FOR DIML4
GREEN - GND
LUTRON HI LUME A SERIES
DRIVER 3 WIRE
& ECOSYS
TO NEXT FIXTURE
ORANGE - HOT DIMMING
PURPLE GRAY- ECOSYS ONLY
PURPLE - ECOSYS ONLY
(-) 0-10V
(+) 0-10V
ECO-SYS BUS
0-10V COLOR
CONTROL
(DIMMER BY
OTHERS)
CONSULT DIMMER MANUFACTURERS FOR DETAILED
WIRING AND INSTALLATION INSTRUCTIONS
BLACK - LINE
NOTE: USAI COLOR CONTROLLER SOURCES 2mA
REFER TO DIMMER MANUFACTURER FOR MAX LOAD
GROUND
TO NEXT FIXTURE
(+)
(-)
WHITE - NEUTRAL
GRAY / ORANGE
ORANGE -- HOT
HOT DIMMING
DIMMING (CAP OFF FOR ECOSYS)
PURPLE / ORANGE
PURPLE - ECOSYS ONLY
(CAP OFF FOR 3-WIRE)
OUTPUT
WHITE - NEUTRAL
PURPLE GRAY- ECOSYS ONLY (CAP OFF FOR 3-WIRE)
USAI
Color Select Controller
PCA-211
Input Voltage: 60 V Max
Input Current: 700ma Max
0-10V Signal Control
INPUT
COLOR SELECT™
LED LIGHT ENGINE
BLACK - LINE
Note: For 3-wire controls, cap off
purple and purple/gray wires. For
EcoSyS Controls, cap off orange
wire.
INTENSITY CONTROL
(BY OTHERS)
DIML4 3-Wire Dimmer Compatibility Chart
Manufacturer
120V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
277V Only
ETC
ETC
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Lutron
Product
Part Number
Dimmed Light
Output Range
Sensor+ Cabinet
Unison DRd Cabinet
Nova T
Nova T
Nova
Nova
Vareo
Skylark
Diva
Ariadni
Vierti
Maestro
Maestro Wireless
RadioTouch
Spacer System
Lyneo Lx
RadioRA 2
HomeWorks QS
Interfaces
GP Dimming Panels
D20 Dimming module
D20F Dimming module
NTF-10NTF-103PNF-10NF-103PVF-10SF-10P-, SF-103PDVF-103P-, DVSCF-103PAYF-103PVTF-6AMAF-6AM-, MSCF-6AMMRF2-F6AN-DVRTA-RX-FSPSF-6A-, SPSF-6AMLXF-103PLRRD-F6AN-DVHQRD-F6AN-DV
PHPM-3F-120, PHPM-3F-DV, GRX-FDBI-16A
Various
100% - 1%
100% - 1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
Sensor+ Cabinet
Unison DRd Cabinet
Nova T
Nova T
Nova
Nova
Skylark
Diva
Ariadni
Vierti
Maestro
Maestro Wireless
RadioTouch
Spacer System
Lyneo Lx
RadioRA 2
HomeWorks QS
Interfaces
GP Dimming Panels
D20 Dimming module
D20F Dimming module
NTF-10-277NTF-103P-277NF-10-277NF-103P-277SF-12P-277-, SF-12P-277-3
DVF-103P-277-, DVSCF-103P-277AYF-103P-277VTF-6AMAF-6AM-277-, MSCF-6AM-277MRF2-F6AN-DVRTA-RX-FSPSF-6A-277-, SPSF-6AM-277LXF-103PL-277RRD-F6AN-DVHQRD-F6AN-DV
PHPM-3F-DV, GRX-FDBI-16A
Various
100% - 1%
100% - 1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Typical
High Wattage
40W and Less 41W - 80W
1–53
1–26
1–53
1–26
1–41
1 – 20
1–20
1 – 10
1–41
1 – 20
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–20
1 – 10
1–15
1–7
1–15
1–7
1–15
1–7
1–41
1 – 20
1–15
1–7
1–20
1 – 10
1–15
1–7
1–15
1–7
1–41
1 – 20
1–41
1 – 20
40W and Less 41W - 80W
1–53
1–26
1–53
1–26
1–44
1 – 22
1–33
1 – 16
1–44
1 – 22
1–33
1 – 16
1–33
1 – 16
1–33
1 – 16
1–44
1 – 22
1–33
1 – 16
1–20
1 – 10
1–33
1 – 16
1–88
1 – 44
1–20
1 – 10
1–33
1 – 16
1–33
1 – 16
1–33
1 – 16
1–88
1 – 44
1–88
1 – 44
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
®
USAI
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2014. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-228-4 Revised 09/26/2016
INTENSITY DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML4 Continued
®
USAI
Lighting
COLOR SELECT ®
Covered By US Patents 8,581,520 and 8,456,109
INTENSITY DIMMING DRIVER WIRING SCHEMES:
Note: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to
specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
DIML4 LED: Lutron Hi-Lume A-Series LED Driver with Eco System Control / LED Dimming Driver Wiring (Dims down to 1%)
J-BOX WIRING FOR DIML4
DIML4 LED: Lutron Hi-Lume A-Series LED Driver with Eco System Control / LED Dimming Driver Wiring (Dims down to 1%)
DIML4 3-Wire Dimmer Compatibility Chart
Manufacturer
120V / 277V
Lutron
Lutron
Lutron
Lutron
Product
Part Number
Dimmed Light
Output Range
PowPak dimming module
Energi Savr Node
GRAFIK Eye QS (120V ONLY)
Quantum
RMJ-ECO32-DV-B
QSN-1ECO-S, QSN-2ECO-S
QSGRJ-_E, QSGR-_E
Various
100%–1%
100%–1%
100%–1%
100%–1%
Qty Fixtures Per Control*
Typical
High Wattage
40W and Less 41W - 80W
1–32
1 – 16
1–64
1 – 32
1–64
1 – 32
1–64
1 – 32
* NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's
documentation for installation instructions and circuit details.
®
USAI
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2014. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-228-4 Revised 09/26/2016
INTENSITY DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML6A & 6B
®
USAI
Lighting
COLOR SELECT ®
Covered By US Patents 8,581,520 and 8,456,109
INTENSITY DIMMING DRIVER WIRING SCHEMES:
Note: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to
specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
DIML6A LED: eldoLED SOLOdrive 561/S 0-10V control dimming driver For Lutron Controls. (dims down to 0.1%)
DIML6B LED: eldoLED SOLOdrive 561/S 0-10V control dimming driver For Non-Lutron Controls. (dims down to 0.1%)
J-BOX WIRING FOR DIML6
NOTE: DRIVER SOURCES 2mA REFER TO
DIMMER MANUFACTURE FOR MAX LOAD
PURPLE - (+) 0-10V
WHITE - NEUTRAL
GREEN - GND
PURPLE - (+) 0-10V
TO NEXT FIXTURE
(+)
(-)
BLACK - LIVE
GRAY / ORANGE
GRAY - (-) 0-10V
PURPLE / ORANGE
GROUND
OUTPUT
BLACK - LIVE
WHITE - NEUTRAL
USAI
Color Select Controller
PCA-211
Input Voltage: 60 V Max
Input Current: 700ma Max
0-10V Signal Control
INPUT
COLOR SELECT™
LED LIGHT ENGINE
TO NEXT FIXTURE
GRAY - (-) 0-10V
0-10V LED
DRIVER
NOTE: USAI COLOR CONTROLLER SOURCES 2mA
REFER TO DIMMER MANUFACTURER FOR MAX LOAD
(-) 0-10V
(+) 0-10V
0-10V COLOR
CONTROL
(DIMMER BY
OTHERS)
INTENSITY CONTROL
(BY OTHERS)
CONSULT DIMMER MANUFACTURERS FOR DETAILED
WIRING AND INSTALLATION INSTRUCTIONS
DIML6A LED: EldoLED SOLOdrive 561/S 0-10V control 100%-0.1% linear-programmed dimming driver for use with
logarithmic-style controls (e.g., Lutron and others listed in the table below)
DIML6A Dimmer Compatibility Chart
Dimmed Light Qty Fixtures
Manufacturer Product
Part Number
Output Range Per Dimmer*
Refer to manufacturer's
120V & 277V
dimmer load rating for
Lutron
Diva
DVTV/NFTV/NTFTV with PP-20
99% - 0.1%
maximum and minimum
Lutron
Energi Savr Node
QSN-4T16-S
100% - 0.1%
fixture quantities per
Lutron
GP Dimming Panels TVM2 Module
99% - 0.1%
dimmer.
Lutron
Interfaces
GRX-TVI w/ GRX3503
100% - 0.1%
Sensor Switch nIO
nIO EZ
100% - 0.1%
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
DIML6B LED: EldoLED
SOLOdrive 561/S 0-10V control 100%-0.1% logarithmic-programmed dimming driver for use with
DIMMER: 0-10V
(BY OTHERS)
linear-style controls (e.g., Crestron, non-Lutron, and others listed in the table below)
0-10V (-)
GRAY
0-10V (+)
PURPLE
LED
DIML6B Dimmer Compatibility Chart
V+
RED
SWITCHED HOT
SWITCHED
HOTNumber DRIVER
Manufacturer
Product
Part
VBLACK
NEUTRAL
WHITE
120V & 277V
GREEN
Bush-Jaeger
Electronic potentiometer
2112U-101
Jung
Electronic potentiometer
GND 240-10
CLASS 2 CONTROL WIRES
Leviton
IllumaTech dimmer
IP710-DLX
LINE
Lightolier
(Philips) Momentum (120V ONLY)
ZP600FAM120
RELAY
Merten
Electronic
potentiometer
5729
(BY OTHERS)
DIML6A,
6B
Pass & Seymour Titan
CD4FB-W
NEUTRAL
TO SWITCH POWER
Watt Stopper
Miro 0-10V DIMMING W/RELAY
DCLV1
Synergy
Wallbox Dimmers
ISD BC
ABB
i-bus
SD/S 2.16.1
Crestron
Modules
GLX-DIMFLV8, GLXP-DIMFLV8
Crestron
Green Light
GLPAC-DIMFLV4-, GLPAC-DIMFLV8Crestron
Green Light Power Pack
GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM, GLPP-1DIMFLV3EX-PM
Crestron
DIN Rail Analog Output Module
DIN-A08
Crestron
DIN Rail 0-10V Fluorescent Dimmer
DIN-4DIMFLV4
Crestron
iLux 0-10V Dimmer Expansion Module CLS-EXP-DIMFLV
* NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
®
USAI
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
Dimmed Light
Output Range
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
100% - 0.1%
Qty Fixtures
Per Dimmer*
Refer to
manufacturer's
dimmer load rating
for maximum and
minimum fixture
quantities per
dimmer.
© 2014. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-228-6 Revised 09/26/2016
INTENSITY DIMMING DRIVER COMPATIBILITY
SELECTION GUIDE
DIML7
®
USAI
Lighting
COLOR SELECT ®
Covered By US Patents 8,581,520 and 8,456,109
INTENSITY DIMMING DRIVER WIRING SCHEMES:
Note: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to
specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details.
DIML7 LED: eldoLED DALI dimming driver (dims down to 0.1%)
J-BOX WIRING FOR DIML7
ORANGE / WHITE (+) DALI
ORANGE (-) DALI
TO NEXT FIXTURE
BLACK - LIVE
WHITE - NEUTRAL
GREEN - GND
NOTE: USAI COLOR CONTROLLER SOURCES 2mA
REFER TO DIMMER MANUFACTURER FOR MAX LOAD
(-) 0-10V
ORANGE / WHITE (+) DALI
BLACK - LIVE
TO NEXT FIXTURE
(+)
(-)
ORANGE (-) DALI
GRAY / ORANGE
GROUND
PURPLE / ORANGE
WHITE - NEUTRAL
USAI
Color Select Controller
PCA-211
Input Voltage: 60 V Max
Input Current: 700ma Max
0-10V Signal Control
INPUT
COLOR SELECT™
LED LIGHT ENGINE
OUTPUT
0-10V LED
DRIVER
(+) 0-10V
0-10V COLOR
CONTROL
(DIMMER BY
OTHERS)
INTENSITY CONTROL
(BY OTHERS)
CONSULT DIMMER MANUFACTURERS FOR DETAILED
WIRING AND INSTALLATION INSTRUCTIONS
NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details.
®
USAI
www.usailighting.com
info@usailighting.com
1126 River Road
New Windsor, NY 12553
T 845–565–8500
F 845–561–1130
© 2014. USAI, LLC.
All rights reserved.
All designs protected by copyright.
I2-228-7 Revised 09/26/2016